diff options
Diffstat (limited to 'drivers/cpufreq/Kconfig.arm')
| -rw-r--r-- | drivers/cpufreq/Kconfig.arm | 205 |
1 files changed, 63 insertions, 142 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index 82e5de1f6f8c..9be0503df55a 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -3,35 +3,9 @@ # ARM CPU Frequency scaling drivers # -config ACPI_CPPC_CPUFREQ - tristate "CPUFreq driver based on the ACPI CPPC spec" - depends on ACPI_PROCESSOR - select ACPI_CPPC_LIB - help - This adds a CPUFreq driver which uses CPPC methods - as described in the ACPIv5.1 spec. CPPC stands for - Collaborative Processor Performance Controls. It - is based on an abstract continuous scale of CPU - performance values which allows the remote power - processor to flexibly optimize for power and - performance. CPPC relies on power management firmware - support for its operation. - - If in doubt, say N. - -config ACPI_CPPC_CPUFREQ_FIE - bool "Frequency Invariance support for CPPC cpufreq driver" - depends on ACPI_CPPC_CPUFREQ && GENERIC_ARCH_TOPOLOGY - default y - help - This extends frequency invariance support in the CPPC cpufreq driver, - by using CPPC delivered and reference performance counters. - - If in doubt, say N. - config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM tristate "Allwinner nvmem based SUN50I CPUFreq driver" - depends on ARCH_SUNXI + depends on ARCH_SUNXI || COMPILE_TEST depends on NVMEM_SUNXI_SID select PM_OPP help @@ -41,17 +15,36 @@ config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM To compile this driver as a module, choose M here: the module will be called sun50i-cpufreq-nvmem. +config ARM_AIROHA_SOC_CPUFREQ + tristate "Airoha EN7581 SoC CPUFreq support" + depends on ARCH_AIROHA || COMPILE_TEST + depends on OF + select PM_OPP + default ARCH_AIROHA + help + This adds the CPUFreq driver for Airoha EN7581 SoCs. + +config ARM_APPLE_SOC_CPUFREQ + tristate "Apple Silicon SoC CPUFreq support" + depends on ARCH_APPLE || (COMPILE_TEST && 64BIT) + select PM_OPP + help + This adds the CPUFreq driver for Apple Silicon machines + (e.g. Apple M1). + config ARM_ARMADA_37XX_CPUFREQ tristate "Armada 37xx CPUFreq support" - depends on ARCH_MVEBU && CPUFREQ_DT + depends on ARCH_MVEBU || COMPILE_TEST + depends on CPUFREQ_DT help This adds the CPUFreq driver support for Marvell Armada 37xx SoCs. The Armada 37xx PMU supports 4 frequency and VDD levels. config ARM_ARMADA_8K_CPUFREQ tristate "Armada 8K CPUFreq driver" - depends on ARCH_MVEBU && CPUFREQ_DT - select ARMADA_AP_CPU_CLK + depends on ARCH_MVEBU || COMPILE_TEST + depends on CPUFREQ_DT + select ARMADA_AP_CPU_CLK if COMMON_CLK help This enables the CPUFreq driver support for Marvell Armada8k SOCs. @@ -73,7 +66,7 @@ config ARM_SCPI_CPUFREQ config ARM_VEXPRESS_SPC_CPUFREQ tristate "Versatile Express SPC based CPUfreq driver" depends on ARM_CPU_TOPOLOGY && HAVE_CLK - depends on ARCH_VEXPRESS_SPC + depends on ARCH_VEXPRESS_SPC || COMPILE_TEST select PM_OPP help This add the CPUfreq driver support for Versatile Express @@ -81,19 +74,20 @@ config ARM_VEXPRESS_SPC_CPUFREQ config ARM_BRCMSTB_AVS_CPUFREQ tristate "Broadcom STB AVS CPUfreq driver" - depends on ARCH_BRCMSTB || COMPILE_TEST - default y + depends on (ARCH_BRCMSTB && !ARM_SCMI_CPUFREQ) || COMPILE_TEST + default y if ARCH_BRCMSTB && !ARM_SCMI_CPUFREQ help Some Broadcom STB SoCs use a co-processor running proprietary firmware ("AVS") to handle voltage and frequency scaling. This driver provides - a standard CPUfreq interface to to the firmware. + a standard CPUfreq interface to the firmware. Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS. config ARM_HIGHBANK_CPUFREQ tristate "Calxeda Highbank-based" - depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR - default m + depends on ARCH_HIGHBANK || COMPILE_TEST + depends on CPUFREQ_DT && REGULATOR && PL320_MBOX + default m if ARCH_HIGHBANK help This adds the CPUFreq driver for Calxeda Highbank SoC based boards. @@ -113,10 +107,11 @@ config ARM_IMX6Q_CPUFREQ config ARM_IMX_CPUFREQ_DT tristate "Freescale i.MX8M cpufreq support" - depends on ARCH_MXC && CPUFREQ_DT + depends on CPUFREQ_DT + depends on ARCH_MXC || COMPILE_TEST help - This adds cpufreq driver support for Freescale i.MX8M series SoCs, - based on cpufreq-dt. + This adds cpufreq driver support for Freescale i.MX7/i.MX8M + series SoCs, based on cpufreq-dt. If in doubt, say N. @@ -128,7 +123,8 @@ config ARM_KIRKWOOD_CPUFREQ config ARM_MEDIATEK_CPUFREQ tristate "CPU Frequency scaling support for MediaTek SoCs" - depends on ARCH_MEDIATEK && REGULATOR + depends on ARCH_MEDIATEK || COMPILE_TEST + depends on REGULATOR select PM_OPP help This adds the CPUFreq driver support for MediaTek SoCs. @@ -136,7 +132,7 @@ config ARM_MEDIATEK_CPUFREQ config ARM_MEDIATEK_CPUFREQ_HW tristate "MediaTek CPUFreq HW driver" depends on ARCH_MEDIATEK || COMPILE_TEST - default m + default m if ARCH_MEDIATEK help Support for the CPUFreq HW driver. Some MediaTek chipsets have a HW engine to offload the steps @@ -147,12 +143,12 @@ config ARM_MEDIATEK_CPUFREQ_HW config ARM_OMAP2PLUS_CPUFREQ bool "TI OMAP2+" - depends on ARCH_OMAP2PLUS + depends on ARCH_OMAP2PLUS || COMPILE_TEST default ARCH_OMAP2PLUS config ARM_QCOM_CPUFREQ_NVMEM tristate "Qualcomm nvmem based CPUFreq" - depends on ARCH_QCOM + depends on ARCH_QCOM || COMPILE_TEST depends on NVMEM_QCOM_QFPROM depends on QCOM_SMEM select PM_OPP @@ -164,6 +160,7 @@ config ARM_QCOM_CPUFREQ_NVMEM config ARM_QCOM_CPUFREQ_HW tristate "QCOM CPUFreq HW driver" depends on ARCH_QCOM || COMPILE_TEST + depends on COMMON_CLK help Support for the CPUFreq HW driver. Some QCOM chipsets have a HW engine to offload the steps @@ -180,88 +177,10 @@ config ARM_RASPBERRYPI_CPUFREQ If in doubt, say N. -config ARM_S3C_CPUFREQ - bool - help - Internal configuration node for common cpufreq on Samsung SoC - -config ARM_S3C24XX_CPUFREQ - bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)" - depends on ARCH_S3C24XX - select ARM_S3C_CPUFREQ - help - This enables the CPUfreq driver for the Samsung S3C24XX family - of CPUs. - - For details, take a look at <file:Documentation/cpu-freq>. - - If in doubt, say N. - -config ARM_S3C24XX_CPUFREQ_DEBUG - bool "Debug CPUfreq Samsung driver core" - depends on ARM_S3C24XX_CPUFREQ - help - Enable s3c_freq_dbg for the Samsung S3C CPUfreq core - -config ARM_S3C24XX_CPUFREQ_IODEBUG - bool "Debug CPUfreq Samsung driver IO timing" - depends on ARM_S3C24XX_CPUFREQ - help - Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core - -config ARM_S3C24XX_CPUFREQ_DEBUGFS - bool "Export debugfs for CPUFreq" - depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS - help - Export status information via debugfs. - -config ARM_S3C2410_CPUFREQ - bool - depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410 - help - CPU Frequency scaling support for S3C2410 - -config ARM_S3C2412_CPUFREQ - bool - depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412 - default y - select S3C2412_IOTIMING - help - CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs. - -config ARM_S3C2416_CPUFREQ - bool "S3C2416 CPU Frequency scaling support" - depends on CPU_S3C2416 - help - This adds the CPUFreq driver for the Samsung S3C2416 and - S3C2450 SoC. The S3C2416 supports changing the rate of the - armdiv clock source and also entering a so called dynamic - voltage scaling mode in which it is possible to reduce the - core voltage of the CPU. - - If in doubt, say N. - -config ARM_S3C2416_CPUFREQ_VCORESCALE - bool "Allow voltage scaling for S3C2416 arm core" - depends on ARM_S3C2416_CPUFREQ && REGULATOR - help - Enable CPU voltage scaling when entering the dvs mode. - It uses information gathered through existing hardware and - tests but not documented in any datasheet. - - If in doubt, say N. - -config ARM_S3C2440_CPUFREQ - bool "S3C2440/S3C2442 CPU Frequency scaling support" - depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442) - default y - help - CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs. - config ARM_S3C64XX_CPUFREQ bool "Samsung S3C64XX" - depends on CPU_S3C6410 - default y + depends on CPU_S3C6410 || COMPILE_TEST + default CPU_S3C6410 help This adds the CPUFreq driver for Samsung S3C6410 SoC. @@ -269,17 +188,14 @@ config ARM_S3C64XX_CPUFREQ config ARM_S5PV210_CPUFREQ bool "Samsung S5PV210 and S5PC110" - depends on CPU_S5PV210 - default y + depends on CPU_S5PV210 || COMPILE_TEST + default CPU_S5PV210 help This adds the CPUFreq driver for Samsung S5PV210 and S5PC110 SoCs. If in doubt, say N. -config ARM_SA1100_CPUFREQ - bool - config ARM_SA1110_CPUFREQ bool @@ -296,14 +212,15 @@ config ARM_SCMI_CPUFREQ config ARM_SPEAR_CPUFREQ bool "SPEAr CPUFreq support" - depends on PLAT_SPEAR - default y + depends on PLAT_SPEAR || COMPILE_TEST + default PLAT_SPEAR help This adds the CPUFreq driver support for SPEAr SOCs. config ARM_STI_CPUFREQ tristate "STi CPUFreq support" - depends on CPUFREQ_DT && SOC_STIH407 + depends on CPUFREQ_DT + depends on SOC_STIH407 || COMPILE_TEST help This driver uses the generic OPP framework to match the running platform with a predefined set of suitable values. If not provided @@ -313,35 +230,39 @@ config ARM_STI_CPUFREQ config ARM_TEGRA20_CPUFREQ tristate "Tegra20/30 CPUFreq support" - depends on ARCH_TEGRA && CPUFREQ_DT - default y + depends on ARCH_TEGRA || COMPILE_TEST + depends on CPUFREQ_DT + default ARCH_TEGRA help This adds the CPUFreq driver support for Tegra20/30 SOCs. config ARM_TEGRA124_CPUFREQ - bool "Tegra124 CPUFreq support" - depends on ARCH_TEGRA && CPUFREQ_DT - default y + tristate "Tegra124 CPUFreq support" + depends on ARCH_TEGRA || COMPILE_TEST + depends on CPUFREQ_DT + default ARCH_TEGRA help This adds the CPUFreq driver support for Tegra124 SOCs. config ARM_TEGRA186_CPUFREQ tristate "Tegra186 CPUFreq support" - depends on ARCH_TEGRA && TEGRA_BPMP + depends on ARCH_TEGRA || COMPILE_TEST + depends on TEGRA_BPMP help This adds the CPUFreq driver support for Tegra186 SOCs. config ARM_TEGRA194_CPUFREQ tristate "Tegra194 CPUFreq support" - depends on ARCH_TEGRA_194_SOC && TEGRA_BPMP - default y + depends on ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC || (64BIT && COMPILE_TEST) + depends on TEGRA_BPMP + default ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC help This adds CPU frequency driver support for Tegra194 SOCs. config ARM_TI_CPUFREQ bool "Texas Instruments CPUFreq support" - depends on ARCH_OMAP2PLUS - default ARCH_OMAP2PLUS + depends on ARCH_OMAP2PLUS || ARCH_K3 || COMPILE_TEST + default ARCH_OMAP2PLUS || ARCH_K3 help This driver enables valid OPPs on the running platform based on values contained within the SoC in use. Enable this in order to @@ -352,7 +273,7 @@ config ARM_TI_CPUFREQ config ARM_PXA2xx_CPUFREQ tristate "Intel PXA2xx CPUfreq driver" - depends on PXA27x || PXA25x + depends on PXA27x || PXA25x || COMPILE_TEST help This add the CPUFreq driver support for Intel PXA2xx SOCs. |