1 files changed, 12 insertions, 51 deletions

diff --git a/drivers/cpufreq/sa1110-cpufreq.c b/drivers/cpufreq/sa1110-cpufreq.c
index 39c90b6f4286..bb7f591a8b05 100644
--- a/drivers/cpufreq/sa1110-cpufreq.c
+++ b/drivers/cpufreq/sa1110-cpufreq.c
@@ -1,12 +1,9 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  *  linux/arch/arm/mach-sa1100/cpu-sa1110.c
  *
  *  Copyright (C) 2001 Russell King
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
  * Note: there are two erratas that apply to the SA1110 here:
  *  7 - SDRAM auto-power-up failure (rev A0)
  * 13 - Corruption of internal register reads/writes following
@@ -159,7 +156,7 @@ sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz,
 	 * half speed or use delayed read latching (errata 13).
 	 */
 	if ((ns_to_cycles(sdram->tck, sd_khz) > 1) ||
-	    (CPU_REVISION < CPU_SA1110_B2 && sd_khz < 62000))
+	    (read_cpuid_revision() < ARM_CPU_REV_SA1110_B2 && sd_khz < 62000))
 		sd_khz /= 2;
 
 	sd->mdcnfg = MDCNFG & 0x007f007f;
@@ -229,36 +226,14 @@ sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram)
 /*
  * Ok, set the CPU frequency.
  */
-static int sa1110_target(struct cpufreq_policy *policy,
-			 unsigned int target_freq,
-			 unsigned int relation)
+static int sa1110_target(struct cpufreq_policy *policy, unsigned int ppcr)
 {
 	struct sdram_params *sdram = &sdram_params;
-	struct cpufreq_freqs freqs;
 	struct sdram_info sd;
 	unsigned long flags;
-	unsigned int ppcr, unused;
-
-	switch (relation) {
-	case CPUFREQ_RELATION_L:
-		ppcr = sa11x0_freq_to_ppcr(target_freq);
-		if (sa11x0_ppcr_to_freq(ppcr) > policy->max)
-			ppcr--;
-		break;
-	case CPUFREQ_RELATION_H:
-		ppcr = sa11x0_freq_to_ppcr(target_freq);
-		if (ppcr && (sa11x0_ppcr_to_freq(ppcr) > target_freq) &&
-		    (sa11x0_ppcr_to_freq(ppcr-1) >= policy->min))
-			ppcr--;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	freqs.old = sa11x0_getspeed(0);
-	freqs.new = sa11x0_ppcr_to_freq(ppcr);
+	unsigned int unused;
 
-	sdram_calculate_timing(&sd, freqs.new, sdram);
+	sdram_calculate_timing(&sd, sa11x0_freq_table[ppcr].frequency, sdram);
 
 #if 0
 	/*
@@ -277,8 +252,6 @@ static int sa1110_target(struct cpufreq_policy *policy,
 	sd.mdcas[2] = 0xaaaaaaaa;
 #endif
 
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
 	/*
 	 * The clock could be going away for some time.  Set the SDRAMs
 	 * to refresh rapidly (every 64 memory clock cycles).  To get
@@ -323,30 +296,24 @@ static int sa1110_target(struct cpufreq_policy *policy,
 	/*
 	 * Now, return the SDRAM refresh back to normal.
 	 */
-	sdram_update_refresh(freqs.new, sdram);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
+	sdram_update_refresh(sa11x0_freq_table[ppcr].frequency, sdram);
 
 	return 0;
 }
 
 static int __init sa1110_cpu_init(struct cpufreq_policy *policy)
 {
-	if (policy->cpu != 0)
-		return -EINVAL;
-	policy->cur = policy->min = policy->max = sa11x0_getspeed(0);
-	policy->cpuinfo.min_freq = 59000;
-	policy->cpuinfo.max_freq = 287000;
-	policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
+	cpufreq_generic_init(policy, sa11x0_freq_table, 0);
 	return 0;
 }
 
 /* sa1110_driver needs __refdata because it must remain after init registers
  * it with cpufreq_register_driver() */
 static struct cpufreq_driver sa1110_driver __refdata = {
-	.flags		= CPUFREQ_STICKY,
-	.verify		= sa11x0_verify_speed,
-	.target		= sa1110_target,
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+			  CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= sa1110_target,
 	.get		= sa11x0_getspeed,
 	.init		= sa1110_cpu_init,
 	.name		= "sa1110",
@@ -377,14 +344,8 @@ static int __init sa1110_clk_init(void)
 	if (!name[0]) {
 		if (machine_is_assabet())
 			name = "TC59SM716-CL3";
-		if (machine_is_pt_system3())
-			name = "K4S641632D";
-		if (machine_is_h3100())
-			name = "KM416S4030CT";
-		if (machine_is_jornada720())
+		if (machine_is_jornada720() || machine_is_h3600())
 			name = "K4S281632B-1H";
-		if (machine_is_nanoengine())
-			name = "MT48LC8M16A2TG-75";
 	}
 
 	sdram = sa1110_find_sdram(name);