diff options
Diffstat (limited to 'drivers/cxl/Kconfig')
| -rw-r--r-- | drivers/cxl/Kconfig | 180 |
1 files changed, 169 insertions, 11 deletions
diff --git a/drivers/cxl/Kconfig b/drivers/cxl/Kconfig index e6de221cc568..48b7314afdb8 100644 --- a/drivers/cxl/Kconfig +++ b/drivers/cxl/Kconfig @@ -2,6 +2,12 @@ menuconfig CXL_BUS tristate "CXL (Compute Express Link) Devices Support" depends on PCI + select FW_LOADER + select FW_UPLOAD + select PCI_DOE + select FIRMWARE_TABLE + select NUMA_KEEP_MEMINFO if NUMA_MEMBLKS + select FWCTL if CXL_FEATURES help CXL is a bus that is electrically compatible with PCI Express, but layers three protocols on that signalling (CXL.io, CXL.cache, and @@ -13,25 +19,26 @@ menuconfig CXL_BUS if CXL_BUS -config CXL_MEM - tristate "CXL.mem: Memory Devices" +config CXL_PCI + tristate "PCI manageability" default CXL_BUS help - The CXL.mem protocol allows a device to act as a provider of - "System RAM" and/or "Persistent Memory" that is fully coherent - as if the memory was attached to the typical CPU memory - controller. + The CXL specification defines a "CXL memory device" sub-class in the + PCI "memory controller" base class of devices. Device's identified by + this class code provide support for volatile and / or persistent + memory to be mapped into the system address map (Host-managed Device + Memory (HDM)). - Say 'y/m' to enable a driver that will attach to CXL.mem devices for - configuration and management primarily via the mailbox interface. See - Chapter 2.3 Type 3 CXL Device in the CXL 2.0 specification for more - details. + Say 'y/m' to enable a driver that will attach to CXL memory expander + devices enumerated by the memory device class code for configuration + and management primarily via the mailbox interface. See Chapter 2.3 + Type 3 CXL Device in the CXL 2.0 specification for more details. If unsure say 'm'. config CXL_MEM_RAW_COMMANDS bool "RAW Command Interface for Memory Devices" - depends on CXL_MEM + depends on CXL_PCI help Enable CXL RAW command interface. @@ -50,7 +57,11 @@ config CXL_MEM_RAW_COMMANDS config CXL_ACPI tristate "CXL ACPI: Platform Support" depends on ACPI + depends on ACPI_NUMA default CXL_BUS + select ACPI_TABLE_LIB + select ACPI_HMAT + select CXL_PORT help Enable support for host managed device memory (HDM) resources published by a platform's ACPI CXL memory layout description. See @@ -75,4 +86,151 @@ config CXL_PMEM provisioning the persistent memory capacity of CXL memory expanders. If unsure say 'm'. + +config CXL_MEM + tristate "CXL: Memory Expansion" + depends on CXL_PCI + default CXL_BUS + help + The CXL.mem protocol allows a device to act as a provider of "System + RAM" and/or "Persistent Memory" that is fully coherent as if the + memory were attached to the typical CPU memory controller. This is + known as HDM "Host-managed Device Memory". + + Say 'y/m' to enable a driver that will attach to CXL.mem devices for + memory expansion and control of HDM. See Chapter 9.13 in the CXL 2.0 + specification for a detailed description of HDM. + + If unsure say 'm'. + +config CXL_FEATURES + bool "CXL: Features" + depends on CXL_PCI + help + Enable support for CXL Features. A CXL device that includes a mailbox + supports commands that allows listing, getting, and setting of + optionally defined features such as memory sparing or post package + sparing. Vendors may define custom features for the device. + + If unsure say 'n' + +config CXL_EDAC_MEM_FEATURES + bool "CXL: EDAC Memory Features" + depends on EXPERT + depends on CXL_MEM + depends on CXL_FEATURES + depends on EDAC >= CXL_BUS + help + The CXL EDAC memory feature is optional and allows host to + control the EDAC memory features configurations of CXL memory + expander devices. + + Say 'y' if you have an expert need to change default settings + of a memory RAS feature established by the platform/device. + Otherwise say 'n'. + +config CXL_EDAC_SCRUB + bool "Enable CXL Patrol Scrub Control (Patrol Read)" + depends on CXL_EDAC_MEM_FEATURES + depends on EDAC_SCRUB + help + The CXL EDAC scrub control is optional and allows host to + control the scrub feature configurations of CXL memory expander + devices. + + When enabled 'cxl_mem' and 'cxl_region' EDAC devices are + published with memory scrub control attributes as described by + Documentation/ABI/testing/sysfs-edac-scrub. + + Say 'y' if you have an expert need to change default settings + of a memory scrub feature established by the platform/device + (e.g. scrub rates for the patrol scrub feature). + Otherwise say 'n'. + +config CXL_EDAC_ECS + bool "Enable CXL Error Check Scrub (Repair)" + depends on CXL_EDAC_MEM_FEATURES + depends on EDAC_ECS + help + The CXL EDAC ECS control is optional and allows host to + control the ECS feature configurations of CXL memory expander + devices. + + When enabled 'cxl_mem' EDAC devices are published with memory + ECS control attributes as described by + Documentation/ABI/testing/sysfs-edac-ecs. + + Say 'y' if you have an expert need to change default settings + of a memory ECS feature established by the platform/device. + Otherwise say 'n'. + +config CXL_EDAC_MEM_REPAIR + bool "Enable CXL Memory Repair" + depends on CXL_EDAC_MEM_FEATURES + depends on EDAC_MEM_REPAIR + help + The CXL EDAC memory repair control is optional and allows host + to control the memory repair features (e.g. sparing, PPR) + configurations of CXL memory expander devices. + + When enabled, the memory repair feature requires an additional + memory of approximately 43KB to store CXL DRAM and CXL general + media event records. + + When enabled 'cxl_mem' EDAC devices are published with memory + repair control attributes as described by + Documentation/ABI/testing/sysfs-edac-memory-repair. + + Say 'y' if you have an expert need to change default settings + of a memory repair feature established by the platform/device. + Otherwise say 'n'. + +config CXL_PORT + default CXL_BUS + tristate + +config CXL_SUSPEND + def_bool y + depends on SUSPEND && CXL_MEM + +config CXL_REGION + bool "CXL: Region Support" + default CXL_BUS + # For MAX_PHYSMEM_BITS + depends on SPARSEMEM + select MEMREGION + select GET_FREE_REGION + help + Enable the CXL core to enumerate and provision CXL regions. A CXL + region is defined by one or more CXL expanders that decode a given + system-physical address range. For CXL regions established by + platform-firmware this option enables memory error handling to + identify the devices participating in a given interleaved memory + range. Otherwise, platform-firmware managed CXL is enabled by being + placed in the system address map and does not need a driver. + + If unsure say 'y' + +config CXL_REGION_INVALIDATION_TEST + bool "CXL: Region Cache Management Bypass (TEST)" + depends on CXL_REGION + help + CXL Region management and security operations potentially invalidate + the content of CPU caches without notifying those caches to + invalidate the affected cachelines. The CXL Region driver attempts + to invalidate caches when those events occur. If that invalidation + fails the region will fail to enable. Reasons for cache + invalidation failure are due to the CPU not providing a cache + invalidation mechanism. For example usage of wbinvd is restricted to + bare metal x86. However, for testing purposes toggling this option + can disable that data integrity safety and proceed with enabling + regions when there might be conflicting contents in the CPU cache. + + If unsure, or if this kernel is meant for production environments, + say N. + +config CXL_MCE + def_bool y + depends on X86_MCE && MEMORY_FAILURE + endif |