diff options
Diffstat (limited to 'drivers/edac/skx_base.c')
| -rw-r--r-- | drivers/edac/skx_base.c | 98 |
1 files changed, 27 insertions, 71 deletions
diff --git a/drivers/edac/skx_base.c b/drivers/edac/skx_base.c index 0a862336a7ce..aa6593ccda2d 100644 --- a/drivers/edac/skx_base.c +++ b/drivers/edac/skx_base.c @@ -33,6 +33,15 @@ static unsigned int nvdimm_count; #define MASK26 0x3FFFFFF /* Mask for 2^26 */ #define MASK29 0x1FFFFFFF /* Mask for 2^29 */ +static struct res_config skx_cfg = { + .type = SKX, + .decs_did = 0x2016, + .busno_cfg_offset = 0xcc, + .ddr_imc_num = 2, + .ddr_chan_num = 3, + .ddr_dimm_num = 2, +}; + static struct skx_dev *get_skx_dev(struct pci_bus *bus, u8 idx) { struct skx_dev *d; @@ -52,7 +61,7 @@ enum munittype { struct munit { u16 did; - u16 devfn[SKX_NUM_IMC]; + u16 devfn[2]; u8 busidx; u8 per_socket; enum munittype mtype; @@ -89,11 +98,11 @@ static int get_all_munits(const struct munit *m) if (!pdev) break; ndev++; - if (m->per_socket == SKX_NUM_IMC) { - for (i = 0; i < SKX_NUM_IMC; i++) + if (m->per_socket == skx_cfg.ddr_imc_num) { + for (i = 0; i < skx_cfg.ddr_imc_num; i++) if (m->devfn[i] == pdev->devfn) break; - if (i == SKX_NUM_IMC) + if (i == skx_cfg.ddr_imc_num) goto fail; } d = get_skx_dev(pdev->bus, m->busidx); @@ -157,14 +166,8 @@ fail: return -ENODEV; } -static struct res_config skx_cfg = { - .type = SKX, - .decs_did = 0x2016, - .busno_cfg_offset = 0xcc, -}; - static const struct x86_cpu_id skx_cpuids[] = { - X86_MATCH_INTEL_FAM6_MODEL_STEPPINGS(SKYLAKE_X, X86_STEPPINGS(0x0, 0xf), &skx_cfg), + X86_MATCH_VFM(INTEL_SKYLAKE_X, &skx_cfg), { } }; MODULE_DEVICE_TABLE(x86cpu, skx_cpuids); @@ -186,11 +189,11 @@ static int skx_get_dimm_config(struct mem_ctl_info *mci, struct res_config *cfg) /* Only the mcmtr on the first channel is effective */ pci_read_config_dword(imc->chan[0].cdev, 0x87c, &mcmtr); - for (i = 0; i < SKX_NUM_CHANNELS; i++) { + for (i = 0; i < cfg->ddr_chan_num; i++) { ndimms = 0; pci_read_config_dword(imc->chan[i].cdev, 0x8C, &amap); pci_read_config_dword(imc->chan[i].cdev, 0x400, &mcddrtcfg); - for (j = 0; j < SKX_NUM_DIMMS; j++) { + for (j = 0; j < cfg->ddr_dimm_num; j++) { dimm = edac_get_dimm(mci, i, j, 0); pci_read_config_dword(imc->chan[i].cdev, 0x80 + 4 * j, &mtr); @@ -587,54 +590,6 @@ static struct notifier_block skx_mce_dec = { .priority = MCE_PRIO_EDAC, }; -#ifdef CONFIG_EDAC_DEBUG -/* - * Debug feature. - * Exercise the address decode logic by writing an address to - * /sys/kernel/debug/edac/skx_test/addr. - */ -static struct dentry *skx_test; - -static int debugfs_u64_set(void *data, u64 val) -{ - struct mce m; - - pr_warn_once("Fake error to 0x%llx injected via debugfs\n", val); - - memset(&m, 0, sizeof(m)); - /* ADDRV + MemRd + Unknown channel */ - m.status = MCI_STATUS_ADDRV + 0x90; - /* One corrected error */ - m.status |= BIT_ULL(MCI_STATUS_CEC_SHIFT); - m.addr = val; - skx_mce_check_error(NULL, 0, &m); - - return 0; -} -DEFINE_SIMPLE_ATTRIBUTE(fops_u64_wo, NULL, debugfs_u64_set, "%llu\n"); - -static void setup_skx_debug(void) -{ - skx_test = edac_debugfs_create_dir("skx_test"); - if (!skx_test) - return; - - if (!edac_debugfs_create_file("addr", 0200, skx_test, - NULL, &fops_u64_wo)) { - debugfs_remove(skx_test); - skx_test = NULL; - } -} - -static void teardown_skx_debug(void) -{ - debugfs_remove_recursive(skx_test); -} -#else -static inline void setup_skx_debug(void) {} -static inline void teardown_skx_debug(void) {} -#endif /*CONFIG_EDAC_DEBUG*/ - /* * skx_init: * make sure we are running on the correct cpu model @@ -648,7 +603,7 @@ static int __init skx_init(void) const struct munit *m; const char *owner; int rc = 0, i, off[3] = {0xd0, 0xd4, 0xd8}; - u8 mc = 0, src_id, node_id; + u8 mc = 0, src_id; struct skx_dev *d; edac_dbg(2, "\n"); @@ -668,6 +623,7 @@ static int __init skx_init(void) return -ENODEV; cfg = (struct res_config *)id->driver_data; + skx_set_res_cfg(cfg); rc = skx_get_hi_lo(0x2034, off, &skx_tolm, &skx_tohm); if (rc) @@ -698,16 +654,16 @@ static int __init skx_init(void) rc = skx_get_src_id(d, 0xf0, &src_id); if (rc < 0) goto fail; - rc = skx_get_node_id(d, &node_id); - if (rc < 0) - goto fail; - edac_dbg(2, "src_id=%d node_id=%d\n", src_id, node_id); - for (i = 0; i < SKX_NUM_IMC; i++) { + + edac_dbg(2, "src_id = %d\n", src_id); + for (i = 0; i < cfg->ddr_imc_num; i++) { d->imc[i].mc = mc++; d->imc[i].lmc = i; d->imc[i].src_id = src_id; - d->imc[i].node_id = node_id; - rc = skx_register_mci(&d->imc[i], d->imc[i].chan[0].cdev, + d->imc[i].num_channels = cfg->ddr_chan_num; + d->imc[i].num_dimms = cfg->ddr_dimm_num; + rc = skx_register_mci(&d->imc[i], &d->imc[i].chan[0].cdev->dev, + pci_name(d->imc[i].chan[0].cdev), "Skylake Socket", EDAC_MOD_STR, skx_get_dimm_config, cfg); if (rc < 0) @@ -728,7 +684,7 @@ static int __init skx_init(void) /* Ensure that the OPSTATE is set correctly for POLL or NMI */ opstate_init(); - setup_skx_debug(); + skx_setup_debug("skx_test"); mce_register_decode_chain(&skx_mce_dec); @@ -742,7 +698,7 @@ static void __exit skx_exit(void) { edac_dbg(2, "\n"); mce_unregister_decode_chain(&skx_mce_dec); - teardown_skx_debug(); + skx_teardown_debug(); if (nvdimm_count) skx_adxl_put(); skx_remove(); |