diff options
Diffstat (limited to 'drivers/edac/skx_common.h')
| -rw-r--r-- | drivers/edac/skx_common.h | 96 |
1 files changed, 80 insertions, 16 deletions
diff --git a/drivers/edac/skx_common.h b/drivers/edac/skx_common.h index b6d3607dffe2..ec4966f7ea40 100644 --- a/drivers/edac/skx_common.h +++ b/drivers/edac/skx_common.h @@ -45,7 +45,6 @@ #define I10NM_NUM_CHANNELS MAX(I10NM_NUM_DDR_CHANNELS, I10NM_NUM_HBM_CHANNELS) #define I10NM_NUM_DIMMS MAX(I10NM_NUM_DDR_DIMMS, I10NM_NUM_HBM_DIMMS) -#define MAX(a, b) ((a) > (b) ? (a) : (b)) #define NUM_IMC MAX(SKX_NUM_IMC, I10NM_NUM_IMC) #define NUM_CHANNELS MAX(SKX_NUM_CHANNELS, I10NM_NUM_CHANNELS) #define NUM_DIMMS MAX(SKX_NUM_DIMMS, I10NM_NUM_DIMMS) @@ -80,6 +79,47 @@ */ #define MCACOD_EXT_MEM_ERR 0x280 +/* Max RRL register sets per {,sub-,pseudo-}channel. */ +#define NUM_RRL_SET 4 +/* Max RRL registers per set. */ +#define NUM_RRL_REG 6 +/* Max correctable error count registers. */ +#define NUM_CECNT_REG 8 + +/* Modes of RRL register set. */ +enum rrl_mode { + /* Last read error from patrol scrub. */ + LRE_SCRUB, + /* Last read error from demand. */ + LRE_DEMAND, + /* First read error from patrol scrub. */ + FRE_SCRUB, + /* First read error from demand. */ + FRE_DEMAND, +}; + +/* RRL registers per {,sub-,pseudo-}channel. */ +struct reg_rrl { + /* RRL register parts. */ + int set_num, reg_num; + enum rrl_mode modes[NUM_RRL_SET]; + u32 offsets[NUM_RRL_SET][NUM_RRL_REG]; + /* RRL register widths in byte per set. */ + u8 widths[NUM_RRL_REG]; + /* RRL control bits of the first register per set. */ + u32 v_mask; + u32 uc_mask; + u32 over_mask; + u32 en_patspr_mask; + u32 noover_mask; + u32 en_mask; + + /* CORRERRCNT register parts. */ + int cecnt_num; + u32 cecnt_offsets[NUM_CECNT_REG]; + u8 cecnt_widths[NUM_CECNT_REG]; +}; + /* * Each cpu socket contains some pci devices that provide global * information, and also some that are local to each of the two @@ -94,6 +134,16 @@ struct skx_dev { struct pci_dev *uracu; /* for i10nm CPU */ struct pci_dev *pcu_cr3; /* for HBM memory detection */ u32 mcroute; + /* + * Some server BIOS may hide certain memory controllers, and the + * EDAC driver skips those hidden memory controllers. However, the + * ADXL still decodes memory error address using physical memory + * controller indices. The mapping table is used to convert the + * physical indices (reported by ADXL) to the logical indices + * (used the EDAC driver) of present memory controllers during the + * error handling process. + */ + u8 mc_mapping[NUM_IMC]; struct skx_imc { struct mem_ctl_info *mci; struct pci_dev *mdev; /* for i10nm CPU */ @@ -104,13 +154,15 @@ struct skx_dev { bool hbm_mc; u8 mc; /* system wide mc# */ u8 lmc; /* socket relative mc# */ - u8 src_id, node_id; + u8 src_id; struct skx_channel { struct pci_dev *cdev; struct pci_dev *edev; - u32 retry_rd_err_log_s; - u32 retry_rd_err_log_d; - u32 retry_rd_err_log_d2; + /* + * Two groups of RRL control registers per channel to save default RRL + * settings of two {sub-,pseudo-}channels in Linux RRL control mode. + */ + u32 rrl_ctl[2][NUM_RRL_SET]; struct skx_dimm { u8 close_pg; u8 bank_xor_enable; @@ -147,6 +199,13 @@ enum { INDEX_MAX }; +enum error_source { + ERR_SRC_1LM, + ERR_SRC_2LM_NM, + ERR_SRC_2LM_FM, + ERR_SRC_NOT_MEMORY, +}; + #define BIT_NM_MEMCTRL BIT_ULL(INDEX_NM_MEMCTRL) #define BIT_NM_CHANNEL BIT_ULL(INDEX_NM_CHANNEL) #define BIT_NM_DIMM BIT_ULL(INDEX_NM_DIMM) @@ -216,14 +275,10 @@ struct res_config { /* HBM mdev device BDF */ struct pci_bdf hbm_mdev_bdf; int sad_all_offset; - /* Offsets of retry_rd_err_log registers */ - u32 *offsets_scrub; - u32 *offsets_scrub_hbm0; - u32 *offsets_scrub_hbm1; - u32 *offsets_demand; - u32 *offsets_demand2; - u32 *offsets_demand_hbm0; - u32 *offsets_demand_hbm1; + /* RRL register sets per DDR channel */ + struct reg_rrl *reg_rrl_ddr; + /* RRL register sets per HBM channel */ + struct reg_rrl *reg_rrl_hbm[2]; }; typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci, @@ -231,13 +286,14 @@ typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci, typedef bool (*skx_decode_f)(struct decoded_addr *res); typedef void (*skx_show_retry_log_f)(struct decoded_addr *res, char *msg, int len, bool scrub_err); -int __init skx_adxl_get(void); -void __exit skx_adxl_put(void); +int skx_adxl_get(void); +void skx_adxl_put(void); void skx_set_decode(skx_decode_f decode, skx_show_retry_log_f show_retry_log); void skx_set_mem_cfg(bool mem_cfg_2lm); +void skx_set_res_cfg(struct res_config *cfg); +void skx_set_mc_mapping(struct skx_dev *d, u8 pmc, u8 lmc); int skx_get_src_id(struct skx_dev *d, int off, u8 *id); -int skx_get_node_id(struct skx_dev *d, u8 *id); int skx_get_all_bus_mappings(struct res_config *cfg, struct list_head **list); @@ -260,4 +316,12 @@ int skx_mce_check_error(struct notifier_block *nb, unsigned long val, void skx_remove(void); +#ifdef CONFIG_EDAC_DEBUG +void skx_setup_debug(const char *name); +void skx_teardown_debug(void); +#else +static inline void skx_setup_debug(const char *name) {} +static inline void skx_teardown_debug(void) {} +#endif + #endif /* _SKX_COMM_EDAC_H */ |