diff options
Diffstat (limited to 'drivers/edac/skx_common.h')
| -rw-r--r-- | drivers/edac/skx_common.h | 239 |
1 files changed, 208 insertions, 31 deletions
diff --git a/drivers/edac/skx_common.h b/drivers/edac/skx_common.h index 03ac067a80b9..f88038e5b18c 100644 --- a/drivers/edac/skx_common.h +++ b/drivers/edac/skx_common.h @@ -10,6 +10,7 @@ #define _SKX_COMM_EDAC_H #include <linux/bits.h> +#include <asm/mce.h> #define MSG_SIZE 1024 @@ -28,60 +29,149 @@ #define GET_BITFIELD(v, lo, hi) \ (((v) & GENMASK_ULL((hi), (lo))) >> (lo)) -#define SKX_NUM_IMC 2 /* Memory controllers per socket */ #define SKX_NUM_CHANNELS 3 /* Channels per memory controller */ #define SKX_NUM_DIMMS 2 /* Max DIMMS per channel */ -#define I10NM_NUM_DDR_IMC 4 #define I10NM_NUM_DDR_CHANNELS 2 #define I10NM_NUM_DDR_DIMMS 2 -#define I10NM_NUM_HBM_IMC 16 #define I10NM_NUM_HBM_CHANNELS 2 #define I10NM_NUM_HBM_DIMMS 1 -#define I10NM_NUM_IMC (I10NM_NUM_DDR_IMC + I10NM_NUM_HBM_IMC) #define I10NM_NUM_CHANNELS MAX(I10NM_NUM_DDR_CHANNELS, I10NM_NUM_HBM_CHANNELS) #define I10NM_NUM_DIMMS MAX(I10NM_NUM_DDR_DIMMS, I10NM_NUM_HBM_DIMMS) -#define MAX(a, b) ((a) > (b) ? (a) : (b)) -#define NUM_IMC MAX(SKX_NUM_IMC, I10NM_NUM_IMC) #define NUM_CHANNELS MAX(SKX_NUM_CHANNELS, I10NM_NUM_CHANNELS) #define NUM_DIMMS MAX(SKX_NUM_DIMMS, I10NM_NUM_DIMMS) #define IS_DIMM_PRESENT(r) GET_BITFIELD(r, 15, 15) #define IS_NVDIMM_PRESENT(r, i) GET_BITFIELD(r, i, i) +#define MCI_MISC_ECC_MODE(m) (((m) >> 59) & 15) +#define MCI_MISC_ECC_DDRT 8 /* read from DDRT */ + +/* + * According to Intel Architecture spec vol 3B, + * Table 15-10 "IA32_MCi_Status [15:0] Compound Error Code Encoding" + * memory errors should fit one of these masks: + * 000f 0000 1mmm cccc (binary) + * 000f 0010 1mmm cccc (binary) [RAM used as cache] + * where: + * f = Correction Report Filtering Bit. If 1, subsequent errors + * won't be shown + * mmm = error type + * cccc = channel + */ +#define MCACOD_MEM_ERR_MASK 0xef80 +/* + * Errors from either the memory of the 1-level memory system or the + * 2nd level memory (the slow "far" memory) of the 2-level memory system. + */ +#define MCACOD_MEM_CTL_ERR 0x80 +/* + * Errors from the 1st level memory (the fast "near" memory as cache) + * of the 2-level memory system. + */ +#define MCACOD_EXT_MEM_ERR 0x280 + +/* Max RRL register sets per {,sub-,pseudo-}channel. */ +#define NUM_RRL_SET 4 +/* Max RRL registers per set. */ +#define NUM_RRL_REG 6 +/* Max correctable error count registers. */ +#define NUM_CECNT_REG 8 + +/* Modes of RRL register set. */ +enum rrl_mode { + /* Last read error from patrol scrub. */ + LRE_SCRUB, + /* Last read error from demand. */ + LRE_DEMAND, + /* First read error from patrol scrub. */ + FRE_SCRUB, + /* First read error from demand. */ + FRE_DEMAND, +}; + +/* RRL registers per {,sub-,pseudo-}channel. */ +struct reg_rrl { + /* RRL register parts. */ + int set_num, reg_num; + enum rrl_mode modes[NUM_RRL_SET]; + u32 offsets[NUM_RRL_SET][NUM_RRL_REG]; + /* RRL register widths in byte per set. */ + u8 widths[NUM_RRL_REG]; + /* RRL control bits of the first register per set. */ + u32 v_mask; + u32 uc_mask; + u32 over_mask; + u32 en_patspr_mask; + u32 noover_mask; + u32 en_mask; + + /* CORRERRCNT register parts. */ + int cecnt_num; + u32 cecnt_offsets[NUM_CECNT_REG]; + u8 cecnt_widths[NUM_CECNT_REG]; +}; + /* * Each cpu socket contains some pci devices that provide global * information, and also some that are local to each of the two * memory controllers on the die. */ struct skx_dev { - struct list_head list; + /* {skx,i10nm}_edac */ u8 bus[4]; int seg; struct pci_dev *sad_all; struct pci_dev *util_all; - struct pci_dev *uracu; /* for i10nm CPU */ - struct pci_dev *pcu_cr3; /* for HBM memory detection */ + struct pci_dev *uracu; + struct pci_dev *pcu_cr3; u32 mcroute; + + /* imh_edac */ + /* System-view MMIO base physical addresses. */ + u64 mmio_base_h_north; + u64 mmio_base_h_south; + int pkg; + + int num_imc; + struct list_head list; struct skx_imc { + /* i10nm_edac */ + struct pci_dev *mdev; + + /* imh_edac */ + struct device *dev; + struct mem_ctl_info *mci; - struct pci_dev *mdev; /* for i10nm CPU */ - void __iomem *mbase; /* for i10nm CPU */ - int chan_mmio_sz; /* for i10nm CPU */ + void __iomem *mbase; + int chan_mmio_sz; int num_channels; /* channels per memory controller */ int num_dimms; /* dimms per channel */ bool hbm_mc; u8 mc; /* system wide mc# */ u8 lmc; /* socket relative mc# */ - u8 src_id, node_id; + u8 src_id; + /* + * Some server BIOS may hide certain memory controllers, and the + * EDAC driver skips those hidden memory controllers. However, the + * ADXL still decodes memory error address using physical memory + * controller indices. The mapping table is used to convert the + * physical indices (reported by ADXL) to the logical indices + * (used the EDAC driver) of present memory controllers during the + * error handling process. + */ + u8 mc_mapping; struct skx_channel { struct pci_dev *cdev; struct pci_dev *edev; - u32 retry_rd_err_log_s; - u32 retry_rd_err_log_d; + /* + * Two groups of RRL control registers per channel to save default RRL + * settings of two {sub-,pseudo-}channels in Linux RRL control mode. + */ + u32 rrl_ctl[2][NUM_RRL_SET]; struct skx_dimm { u8 close_pg; u8 bank_xor_enable; @@ -90,7 +180,7 @@ struct skx_dev { u8 colbits; } dimms[NUM_DIMMS]; } chan[NUM_CHANNELS]; - } imc[NUM_IMC]; + } imc[]; }; struct skx_pvt { @@ -100,7 +190,9 @@ struct skx_pvt { enum type { SKX, I10NM, - SPR + SPR, + GNR, + DMR, }; enum { @@ -108,18 +200,29 @@ enum { INDEX_MEMCTRL, INDEX_CHANNEL, INDEX_DIMM, + INDEX_CS, INDEX_NM_FIRST, INDEX_NM_MEMCTRL = INDEX_NM_FIRST, INDEX_NM_CHANNEL, INDEX_NM_DIMM, + INDEX_NM_CS, INDEX_MAX }; +enum error_source { + ERR_SRC_1LM, + ERR_SRC_2LM_NM, + ERR_SRC_2LM_FM, + ERR_SRC_NOT_MEMORY, +}; + #define BIT_NM_MEMCTRL BIT_ULL(INDEX_NM_MEMCTRL) #define BIT_NM_CHANNEL BIT_ULL(INDEX_NM_CHANNEL) #define BIT_NM_DIMM BIT_ULL(INDEX_NM_DIMM) +#define BIT_NM_CS BIT_ULL(INDEX_NM_CS) struct decoded_addr { + struct mce *mce; struct skx_dev *dev; u64 addr; int socket; @@ -129,6 +232,7 @@ struct decoded_addr { int sktways; int chanways; int dimm; + int cs; int rank; int channel_rank; u64 rank_address; @@ -136,25 +240,85 @@ struct decoded_addr { int column; int bank_address; int bank_group; + bool decoded_by_adxl; +}; + +struct pci_bdf { + u32 bus : 8; + u32 dev : 5; + u32 fun : 3; }; struct res_config { enum type type; - /* Configuration agent device ID */ - unsigned int decs_did; - /* Default bus number configuration register offset */ - int busno_cfg_offset; + /* DDR memory controllers per socket */ + int ddr_imc_num; + /* DDR channels per DDR memory controller */ + int ddr_chan_num; + /* DDR DIMMs per DDR memory channel */ + int ddr_dimm_num; /* Per DDR channel memory-mapped I/O size */ int ddr_chan_mmio_sz; + /* HBM memory controllers per socket */ + int hbm_imc_num; + /* HBM channels per HBM memory controller */ + int hbm_chan_num; + /* HBM DIMMs per HBM memory channel */ + int hbm_dimm_num; /* Per HBM channel memory-mapped I/O size */ int hbm_chan_mmio_sz; bool support_ddr5; - /* SAD device number and function number */ - unsigned int sad_all_devfn; - int sad_all_offset; - /* Offsets of retry_rd_err_log registers */ - u32 *offsets_scrub; - u32 *offsets_demand; + /* RRL register sets per DDR channel */ + struct reg_rrl *reg_rrl_ddr; + /* RRL register sets per HBM channel */ + struct reg_rrl *reg_rrl_hbm[2]; + union { + /* {skx,i10nm}_edac */ + struct { + /* Configuration agent device ID */ + unsigned int decs_did; + /* Default bus number configuration register offset */ + int busno_cfg_offset; + struct pci_bdf sad_all_bdf; + struct pci_bdf pcu_cr3_bdf; + struct pci_bdf util_all_bdf; + struct pci_bdf uracu_bdf; + struct pci_bdf ddr_mdev_bdf; + struct pci_bdf hbm_mdev_bdf; + int sad_all_offset; + }; + /* imh_edac */ + struct { + /* MMIO base physical address in local package view */ + u64 mmio_base_l_north; + u64 mmio_base_l_south; + u64 ddr_imc_base; + u64 ddr_reg_mcmtr_offset; + u8 ddr_reg_mcmtr_width; + u64 ddr_reg_dimmmtr_offset; + u8 ddr_reg_dimmmtr_width; + u64 ubox_base; + u32 ubox_size; + u32 ubox_reg_mmio_base_offset; + u8 ubox_reg_mmio_base_width; + u32 ubox_reg_socket_id_offset; + u8 ubox_reg_socket_id_width; + u64 pcu_base; + u32 pcu_size; + u32 pcu_reg_capid3_offset; + u8 pcu_reg_capid3_width; + u64 sca_base; + u32 sca_size; + u32 sca_reg_tolm_offset; + u8 sca_reg_tolm_width; + u32 sca_reg_tohm_offset; + u8 sca_reg_tohm_width; + u64 ha_base; + u32 ha_size; + u32 ha_reg_mode_offset; + u8 ha_reg_mode_width; + }; + }; }; typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci, @@ -162,17 +326,22 @@ typedef int (*get_dimm_config_f)(struct mem_ctl_info *mci, typedef bool (*skx_decode_f)(struct decoded_addr *res); typedef void (*skx_show_retry_log_f)(struct decoded_addr *res, char *msg, int len, bool scrub_err); -int __init skx_adxl_get(void); -void __exit skx_adxl_put(void); +int skx_adxl_get(void); +void skx_adxl_put(void); void skx_set_decode(skx_decode_f decode, skx_show_retry_log_f show_retry_log); void skx_set_mem_cfg(bool mem_cfg_2lm); +void skx_set_res_cfg(struct res_config *cfg); +void skx_init_mc_mapping(struct skx_dev *d); +void skx_set_mc_mapping(struct skx_dev *d, u8 pmc, u8 lmc); int skx_get_src_id(struct skx_dev *d, int off, u8 *id); -int skx_get_node_id(struct skx_dev *d, u8 *id); int skx_get_all_bus_mappings(struct res_config *cfg, struct list_head **list); +struct list_head *skx_get_edac_list(void); + int skx_get_hi_lo(unsigned int did, int off[], u64 *tolm, u64 *tohm); +void skx_set_hi_lo(u64 tolm, u64 tohm); int skx_get_dimm_info(u32 mtr, u32 mcmtr, u32 amap, struct dimm_info *dimm, struct skx_imc *imc, int chan, int dimmno, @@ -181,7 +350,7 @@ int skx_get_dimm_info(u32 mtr, u32 mcmtr, u32 amap, struct dimm_info *dimm, int skx_get_nvdimm_info(struct dimm_info *dimm, struct skx_imc *imc, int chan, int dimmno, const char *mod_str); -int skx_register_mci(struct skx_imc *imc, struct pci_dev *pdev, +int skx_register_mci(struct skx_imc *imc, struct device *dev, const char *dev_name, const char *ctl_name, const char *mod_str, get_dimm_config_f get_dimm_config, struct res_config *cfg); @@ -191,4 +360,12 @@ int skx_mce_check_error(struct notifier_block *nb, unsigned long val, void skx_remove(void); +#ifdef CONFIG_EDAC_DEBUG +void skx_setup_debug(const char *name); +void skx_teardown_debug(void); +#else +static inline void skx_setup_debug(const char *name) {} +static inline void skx_teardown_debug(void) {} +#endif + #endif /* _SKX_COMM_EDAC_H */ |