diff options
Diffstat (limited to 'drivers/gpio/Kconfig')
| -rw-r--r-- | drivers/gpio/Kconfig | 796 |
1 files changed, 598 insertions, 198 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index fab571016adf..c74da29253e8 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -3,19 +3,17 @@ # GPIO infrastructure and drivers # -config ARCH_HAVE_CUSTOM_GPIO_H +config GPIOLIB_LEGACY + def_bool y + +config HAVE_SHARED_GPIOS bool - help - Selecting this config option from the architecture Kconfig allows - the architecture to provide a custom asm/gpio.h implementation - overriding the default implementations. New uses of this are - strongly discouraged. menuconfig GPIOLIB bool "GPIO Support" help This enables GPIO support through the generic GPIO library. - You only need to enable this, if you also want to enable + You only need to enable this if you also want to enable one or more of the GPIO drivers below. If unsure, say N. @@ -47,6 +45,11 @@ config GPIOLIB_IRQCHIP select IRQ_DOMAIN bool +config GPIO_SHARED + def_bool y + depends on HAVE_SHARED_GPIOS || COMPILE_TEST + select AUXILIARY_BUS + config DEBUG_GPIO bool "Debug GPIO calls" depends on DEBUG_KERNEL @@ -69,9 +72,16 @@ config GPIO_SYSFS use the character device /dev/gpiochipN with the appropriate ioctl() operations instead. +config GPIO_SYSFS_LEGACY + bool "Enable legacy functionalities of the sysfs interface" + depends on GPIO_SYSFS + default y if GPIO_SYSFS + help + Say Y here if you want to enable the legacy, global GPIO + numberspace-based functionalities of the sysfs interface. + config GPIO_CDEV - bool - prompt "Character device (/dev/gpiochipN) support" if EXPERT + bool "Character device (/dev/gpiochipN) support" if EXPERT default y help Say Y here to add the character device /dev/gpiochipN interface @@ -100,15 +110,36 @@ config GPIO_GENERIC tristate config GPIO_REGMAP - depends on REGMAP + select REGMAP tristate +config GPIO_SWNODE_UNDEFINED + bool + help + This adds a special place holder for software nodes to contain an + undefined GPIO reference, this is primarily used by SPI to allow a + list of GPIO chip selects to mark a certain chip select as being + controlled the SPI device's internal chip select mechanism and not + a GPIO. + # put drivers in the right section, in alphabetical order # This symbol is selected by both I2C and SPI expanders config GPIO_MAX730X tristate +config GPIO_IDIO_16 + tristate + select REGMAP_IRQ + select GPIOLIB_IRQCHIP + select GPIO_REGMAP + help + Enables support for the idio-16 library functions. The idio-16 library + provides functions to facilitate communication with devices within the + ACCES IDIO-16 family such as the 104-IDIO-16 and the PCI-IDIO-16. + + If built as a module its name will be gpio-idio-16. + menu "Memory mapped GPIO drivers" depends on HAS_IOMEM @@ -128,7 +159,6 @@ config GPIO_74XX_MMIO config GPIO_ALTERA tristate "Altera GPIO" - depends on OF_GPIO select GPIOLIB_IRQCHIP help Say Y or M here to build support for the Altera PIO device. @@ -140,8 +170,8 @@ config GPIO_AMDPT depends on ACPI select GPIO_GENERIC help - driver for GPIO functionality on Promontory IOHub - Require ACPI ASL code to enumerate as a platform device. + Driver for GPIO functionality on Promontory IOHub. + Requires ACPI ASL code to enumerate as a platform device. config GPIO_ASPEED tristate "Aspeed GPIO support" @@ -181,7 +211,8 @@ config GPIO_RASPBERRYPI_EXP config GPIO_BCM_KONA bool "Broadcom Kona GPIO" - depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) + depends on ARCH_BCM_MOBILE || COMPILE_TEST + select GPIOLIB_IRQCHIP help Turn on GPIO support for Broadcom "Kona" chips. @@ -194,10 +225,22 @@ config GPIO_BCM_XGS_IPROC help Say yes here to enable GPIO support for Broadcom XGS iProc SoCs. +config GPIO_BLZP1600 + tristate "Blaize BLZP1600 GPIO support" + default y if ARCH_BLAIZE + depends on ARCH_BLAIZE || COMPILE_TEST + depends on OF_GPIO + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say Y or M here to add support for the Blaize BLZP1600 GPIO device. + The controller is based on the Verisilicon Microelectronics GPIO APB v0.2 + IP block. + config GPIO_BRCMSTB tristate "BRCMSTB GPIO support" default y if (ARCH_BRCMSTB || BMIPS_GENERIC) - depends on OF_GPIO && (ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST) + depends on OF_GPIO && (ARCH_BRCMSTB || ARCH_BCM2835 || BMIPS_GENERIC || COMPILE_TEST) select GPIO_GENERIC select IRQ_DOMAIN help @@ -219,9 +262,10 @@ config GPIO_CLPS711X Say yes here to support GPIO on CLPS711X SoCs. config GPIO_DAVINCI - bool "TI Davinci/Keystone GPIO support" + tristate "TI Davinci/Keystone GPIO support" default y if ARCH_DAVINCI - depends on (ARM || ARM64) && (ARCH_DAVINCI || ARCH_KEYSTONE || ARCH_K3) + depends on ((ARM || ARM64) && (ARCH_DAVINCI || ARCH_KEYSTONE || ARCH_K3)) || COMPILE_TEST + select GPIOLIB_IRQCHIP help Say yes here to enable GPIO support for TI Davinci/Keystone SoCs. @@ -247,9 +291,19 @@ config GPIO_EM help Say yes here to support GPIO on Renesas Emma Mobile SoCs. +config GPIO_EN7523 + tristate "Airoha GPIO support" + depends on ARCH_AIROHA + default ARCH_AIROHA + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say Y or M here to support the GPIO controller block on the + Airoha EN7523 SoC. It supports two banks of 32 GPIOs. + config GPIO_EP93XX def_bool y - depends on ARCH_EP93XX + depends on ARCH_EP93XX || COMPILE_TEST select GPIO_GENERIC select GPIOLIB_IRQCHIP @@ -263,7 +317,7 @@ config GPIO_EXAR config GPIO_GE_FPGA bool "GE FPGA based GPIO" - depends on GE_FPGA + depends on GE_FPGA || COMPILE_TEST select GPIO_GENERIC help Support for common GPIO functionality provided on some GE Single Board @@ -289,24 +343,42 @@ config GPIO_GENERIC_PLATFORM help Say yes here to support basic platform_device memory-mapped GPIO controllers. +config GPIO_GRANITERAPIDS + tristate "Intel Granite Rapids-D vGPIO support" + depends on X86 || COMPILE_TEST + select GPIOLIB_IRQCHIP + help + Select this to enable virtual GPIO support on platforms with the + following SoCs: + + - Intel Granite Rapids-D + + The driver enables basic GPIO functionality and implements interrupt + support. The virtual GPIO driver controls GPIO lines via a firmware + interface. The physical GPIO pins reside on device that is external + from the main SoC package, such as a BMC or a CPLD. + + To compile this driver as a module, choose M here: the module will + be called gpio-graniterapids. + config GPIO_GRGPIO tristate "Aeroflex Gaisler GRGPIO support" - depends on OF_GPIO + depends on OF || COMPILE_TEST select GPIO_GENERIC - select IRQ_DOMAIN + select GPIOLIB_IRQCHIP help Select this to support Aeroflex Gaisler GRGPIO cores from the GRLIB VHDL IP core library. config GPIO_HISI tristate "HiSilicon GPIO controller driver" - depends on (ARM64 && ACPI) || COMPILE_TEST + depends on ARM64 || COMPILE_TEST select GPIO_GENERIC select GPIOLIB_IRQCHIP help Say Y or M here to build support for the HiSilicon GPIO controller driver GPIO block. - This GPIO controller support double-edge interrupt and multi-core + This GPIO controller supports double-edge interrupt and multi-core concurrent access. config GPIO_HLWD @@ -321,30 +393,22 @@ config GPIO_HLWD config GPIO_ICH tristate "Intel ICH GPIO" - depends on X86 - depends on LPC_ICH + depends on (X86 && LPC_ICH) || (COMPILE_TEST && HAS_IOPORT) help Say yes here to support the GPIO functionality of a number of Intel ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 - ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg + ICH9, ICH10, Series 5/3400 (e.g. Ibex Peak), Series 6/C200 (e.g. Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). If unsure, say N. -config GPIO_IOP - tristate "Intel IOP GPIO" - depends on ARCH_IOP32X || COMPILE_TEST - select GPIO_GENERIC - help - Say yes here to support the GPIO functionality of a number of Intel - IOP32X or IOP33X. - - If unsure, say N. +config GPIO_IMX_SCU + def_bool y + depends on IMX_SCU config GPIO_IXP4XX bool "Intel IXP4xx GPIO" - depends on ARM # For <asm/mach-types.h> - depends on ARCH_IXP4XX + depends on (ARCH_IXP4XX && OF) || COMPILE_TEST select GPIO_GENERIC select GPIOLIB_IRQCHIP select IRQ_DOMAIN_HIERARCHY @@ -353,6 +417,7 @@ config GPIO_IXP4XX IXP4xx series of chips. If unsure, say N. + config GPIO_LOGICVC tristate "Xylon LogiCVC GPIO support" depends on MFD_SYSCON && OF @@ -364,13 +429,27 @@ config GPIO_LOONGSON bool "Loongson-2/3 GPIO support" depends on CPU_LOONGSON2EF || CPU_LOONGSON64 help - driver for GPIO functionality on Loongson-2F/3A/3B processors. + Driver for GPIO functionality on Loongson-2F/3A/3B processors. + +config GPIO_LOONGSON_64BIT + tristate "Loongson 64 bit GPIO support" + depends on LOONGARCH || COMPILE_TEST + depends on OF_GPIO + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say yes here to support the GPIO functionality of a number of + Loongson series of chips. The Loongson GPIO controller supports + up to 60 GPIOS in total, 4 of which are dedicated GPIO pins, and + the remaining 56 are reused with other functions, with edge or + level triggered interrupts. config GPIO_LPC18XX tristate "NXP LPC18XX/43XX GPIO support" default y if ARCH_LPC18XX depends on OF_GPIO && (ARCH_LPC18XX || COMPILE_TEST) select IRQ_DOMAIN_HIERARCHY + select GPIOLIB_IRQCHIP help Select this option to enable GPIO driver for NXP LPC18XX/43XX devices. @@ -392,15 +471,15 @@ config GPIO_MENZ127 depends on MCB select GPIO_GENERIC help - Say yes here to support the MEN 16Z127 GPIO Controller + Say yes here to support the MEN 16Z127 GPIO Controller. config GPIO_MM_LANTIQ bool "Lantiq Memory mapped GPIOs" depends on LANTIQ && SOC_XWAY help This enables support for memory mapped GPIOs on the External Bus Unit - (EBU) found on Lantiq SoCs. The gpios are output only as they are - created by attaching a 16bit latch to the bus. + (EBU) found on Lantiq SoCs. The GPIOs are output only as they are + created by attaching a 16-bit latch to the bus. config GPIO_MPC5200 def_bool y @@ -412,7 +491,7 @@ config GPIO_MPC8XXX FSL_SOC_BOOKE || PPC_86xx || ARCH_LAYERSCAPE || ARM || \ COMPILE_TEST select GPIO_GENERIC - select IRQ_DOMAIN + select GPIOLIB_IRQCHIP help Say Y here if you're going to use hardware that connects to the MPC512x/831x/834x/837x/8572/8610/QorIQ GPIOs. @@ -424,12 +503,12 @@ config GPIO_MT7621 select GPIO_GENERIC select GPIOLIB_IRQCHIP help - Say yes here to support the Mediatek MT7621 SoC GPIO device + Say yes here to support the Mediatek MT7621 SoC GPIO device. config GPIO_MVEBU - def_bool y - depends on PLAT_ORION || ARCH_MVEBU - depends on OF_GPIO + bool "Marvell Orion and EBU GPIO support" if COMPILE_TEST + depends on PLAT_ORION || ARCH_MVEBU || COMPILE_TEST + default PLAT_ORION || ARCH_MVEBU select GENERIC_IRQ_CHIP select REGMAP_MMIO @@ -446,6 +525,25 @@ config GPIO_MXS select GPIO_GENERIC select GENERIC_IRQ_CHIP +config GPIO_NOMADIK + bool "Nomadik GPIO driver" + depends on ARCH_U8500 || ARCH_NOMADIK || MACH_EYEQ5 || COMPILE_TEST + select GPIOLIB_IRQCHIP + help + Say yes here to support the Nomadik SoC GPIO block. This block is also + used by the Mobileye EyeQ5 SoC. + + It handles up to 32 GPIOs per bank, that can all be interrupt sources. + It is deeply interconnected with the associated pinctrl driver as GPIO + registers handle muxing ("alternate functions") as well. + +config GPIO_NPCM_SGPIO + bool "Nuvoton SGPIO support" + depends on ARCH_NPCM || COMPILE_TEST + select GPIOLIB_IRQCHIP + help + Say Y here to support Nuvoton NPCM7XX/NPCM8XX SGPIO functionality. + config GPIO_OCTEON tristate "Cavium OCTEON GPIO" depends on CAVIUM_OCTEON_SOC @@ -455,9 +553,9 @@ config GPIO_OCTEON family of SOCs. config GPIO_OMAP - tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST + tristate "TI OMAP GPIO support" + depends on ARCH_OMAP || COMPILE_TEST default y if ARCH_OMAP - depends on ARM select GENERIC_IRQ_CHIP select GPIOLIB_IRQCHIP help @@ -465,25 +563,24 @@ config GPIO_OMAP config GPIO_PL061 tristate "PrimeCell PL061 GPIO support" - depends on ARM_AMBA + depends on ARM_AMBA || COMPILE_TEST select IRQ_DOMAIN select GPIOLIB_IRQCHIP help - Say yes here to support the PrimeCell PL061 GPIO device + Say yes here to support the PrimeCell PL061 GPIO device. -config GPIO_PMIC_EIC_SPRD - tristate "Spreadtrum PMIC EIC support" - depends on MFD_SC27XX_PMIC || COMPILE_TEST - depends on OF_GPIO - select GPIOLIB_IRQCHIP +config GPIO_POLARFIRE_SOC + bool "Microchip FPGA GPIO support" + select REGMAP_MMIO help - Say yes here to support Spreadtrum PMIC EIC device. + Say yes here to support the GPIO controllers on Microchip FPGAs. config GPIO_PXA bool "PXA GPIO support" depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST + select GPIOLIB_IRQCHIP help - Say yes here to support the PXA GPIO device + Say yes here to support the PXA GPIO device. config GPIO_RCAR tristate "Renesas R-Car and RZ/G GPIO support" @@ -520,10 +617,33 @@ config GPIO_REG A 32-bit single register GPIO fixed in/out implementation. This can be used to represent any register as a set of GPIO signals. +config GPIO_ROCKCHIP + tristate "Rockchip GPIO support" + depends on ARCH_ROCKCHIP || COMPILE_TEST + select GENERIC_IRQ_CHIP + select GPIOLIB_IRQCHIP + default ARCH_ROCKCHIP + help + Say yes here to support GPIO on Rockchip SoCs. + +config GPIO_RTD + tristate "Realtek DHC GPIO support" + depends on ARCH_REALTEK || COMPILE_TEST + default y + select GPIOLIB_IRQCHIP + help + This option enables support for GPIOs found on Realtek DHC(Digital + Home Center) SoCs family, including RTD1295, RTD1315E, RTD1319, + RTD1319D, RTD1395, RTD1619 and RTD1619B. + + Say yes here to support GPIO functionality and GPIO interrupt on + Realtek DHC SoCs. + config GPIO_SAMA5D2_PIOBU tristate "SAMA5D2 PIOBU GPIO support" depends on MFD_SYSCON depends on OF_GPIO + depends on ARCH_AT91 || COMPILE_TEST select GPIO_SYSCON help Say yes here to use the PIOBU pins as GPIOs. @@ -533,7 +653,7 @@ config GPIO_SAMA5D2_PIOBU maintain their value during backup/self-refresh. config GPIO_SIFIVE - bool "SiFive GPIO support" + tristate "SiFive GPIO support" depends on OF_GPIO select IRQ_DOMAIN_HIERARCHY select GPIO_GENERIC @@ -560,12 +680,21 @@ config GPIO_SNPS_CREG where only several fields in register belong to GPIO lines and each GPIO line owns a field with different length and on/off value. +config GPIO_SPACEMIT_K1 + tristate "SPACEMIT K1 GPIO support" + depends on ARCH_SPACEMIT || COMPILE_TEST + depends on OF_GPIO + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say yes here to support the SpacemiT's K1 GPIO device. + config GPIO_SPEAR_SPICS bool "ST SPEAr13xx SPI Chip Select as GPIO support" depends on PLAT_SPEAR select GENERIC_IRQ_CHIP help - Say yes here to support ST SPEAr SPI Chip Select as GPIO device + Say yes here to support ST SPEAr SPI Chip Select as GPIO device. config GPIO_SPRD tristate "Spreadtrum GPIO support" @@ -575,14 +704,6 @@ config GPIO_SPRD help Say yes here to support Spreadtrum GPIO device. -config GPIO_STA2X11 - bool "STA2x11/ConneXt GPIO support" - depends on MFD_STA2X11 - select GENERIC_IRQ_CHIP - help - Say yes here to support the STA2x11/ConneXt GPIO device. - The GPIO module has 128 GPIO pins with alternate functions. - config GPIO_STP_XWAY bool "XWAY STP GPIOs" depends on SOC_XWAY || COMPILE_TEST @@ -590,8 +711,8 @@ config GPIO_STP_XWAY help This enables support for the Serial To Parallel (STP) unit found on XWAY SoC. The STP allows the SoC to drive a shift registers cascade, - that can be up to 24 bit. This peripheral is aimed at driving leds. - Some of the gpios/leds can be auto updated by the soc with dsl and + that can be up to 24 bits. This peripheral is aimed at driving LEDs. + Some of the GPIOs/LEDs can be auto updated by the SoC with DSL and phy status. config GPIO_SYSCON @@ -600,8 +721,20 @@ config GPIO_SYSCON help Say yes here to support GPIO functionality though SYSCON driver. +config GPIO_TANGIER + tristate + select GPIOLIB_IRQCHIP + help + GPIO support for Intel Tangier and compatible platforms. + Currently supported: + - Elkhart Lake + - Merrifield + + If built as a module its name will be gpio-tangier. + config GPIO_TB10X - bool + bool "Abilis Systems TB10x GPIO controller" + depends on ARC_PLAT_TB10X || COMPILE_TEST select GPIO_GENERIC select GENERIC_IRQ_CHIP select OF_GPIO @@ -618,13 +751,13 @@ config GPIO_TEGRA config GPIO_TEGRA186 tristate "NVIDIA Tegra186 GPIO support" - default ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC - depends on ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC || COMPILE_TEST + default ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC + depends on ARCH_TEGRA_186_SOC || ARCH_TEGRA_194_SOC || ARCH_TEGRA_234_SOC || COMPILE_TEST depends on OF_GPIO select GPIOLIB_IRQCHIP select IRQ_DOMAIN_HIERARCHY help - Say yes here to support GPIO pins on NVIDIA Tegra186 SoCs. + Say yes here to support GPIO pins on NVIDIA Tegra186, 194 and 234 SoCs. config GPIO_TS4800 tristate "TS-4800 DIO blocks and compatibles" @@ -654,11 +787,13 @@ config GPIO_UNIPHIER Say yes here to support UniPhier GPIOs. config GPIO_VF610 - def_bool y - depends on ARCH_MXC && SOC_VF610 + tristate "VF610 GPIO support" + default y if SOC_VF610 + depends on ARCH_MXC || COMPILE_TEST select GPIOLIB_IRQCHIP + select GPIO_GENERIC help - Say yes here to support Vybrid vf610 GPIOs. + Say yes here to support i.MX or Vybrid vf610 GPIOs. config GPIO_VISCONTI tristate "Toshiba Visconti GPIO support" @@ -670,26 +805,8 @@ config GPIO_VISCONTI help Say yes here to support GPIO on Tohisba Visconti. -config GPIO_VR41XX - tristate "NEC VR4100 series General-purpose I/O Uint support" - depends on CPU_VR41XX - help - Say yes here to support the NEC VR4100 series General-purpose I/O Uint - -config GPIO_VX855 - tristate "VIA VX855/VX875 GPIO" - depends on (X86 || COMPILE_TEST) && PCI - select MFD_CORE - select MFD_VX855 - help - Support access to the VX855/VX875 GPIO lines through the gpio library. - - This driver provides common support for accessing the device, - additional drivers must be enabled in order to use the - functionality of the device. - config GPIO_WCD934X - tristate "Qualcomm Technologies Inc WCD9340/WCD9341 gpio controller driver" + tristate "Qualcomm Technologies Inc WCD9340/WCD9341 GPIO controller driver" depends on MFD_WCD934X && OF_GPIO help This driver is to support GPIO block found on the Qualcomm Technologies @@ -717,19 +834,16 @@ config GPIO_XGENE_SB config GPIO_XILINX tristate "Xilinx GPIO support" select GPIOLIB_IRQCHIP - depends on OF_GPIO help - Say yes here to support the Xilinx FPGA GPIO device + Say yes here to support the Xilinx FPGA GPIO device. config GPIO_XLP - tristate "Netlogic XLP GPIO support" - depends on OF_GPIO && (CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST) + tristate "Cavium ThunderX2 GPIO support" + depends on ARCH_THUNDER2 || COMPILE_TEST select GPIOLIB_IRQCHIP help - This driver provides support for GPIO interface on Netlogic XLP MIPS64 - SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, - XLP9XX and XLP5XX. The same GPIO controller block is also present in - Cavium's ThunderX2 CN99XX SoCs. + This driver provides support for GPIO interface on Cavium's ThunderX2 + CN99XX SoCs (Originally from Netlogic XLP). If unsure, say N. @@ -740,24 +854,36 @@ config GPIO_XTENSA depends on !SMP help Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input) - and EXPSTATE (output) ports + and EXPSTATE (output) ports. config GPIO_ZEVIO bool "LSI ZEVIO SoC memory mapped GPIOs" - depends on ARM && OF_GPIO + depends on ARM help Say yes here to support the GPIO controller in LSI ZEVIO SoCs. config GPIO_ZYNQ tristate "Xilinx Zynq GPIO support" - depends on ARCH_ZYNQ || ARCH_ZYNQMP + depends on ARCH_ZYNQ || ARCH_ZYNQMP || COMPILE_TEST select GPIOLIB_IRQCHIP help Say yes here to support Xilinx Zynq GPIO controller. +config GPIO_ZYNQMP_MODEPIN + tristate "ZynqMP ps-mode pin GPIO configuration driver" + depends on ZYNQMP_FIRMWARE || COMPILE_TEST + default ZYNQMP_FIRMWARE + help + Say yes here to support the ZynqMP ps-mode pin GPIO configuration + driver. + + This ps-mode pin GPIO driver is based on GPIO framework. PS_MODE + is 4-bits boot mode pins. It sets and gets the status of + the ps-mode pin. Every pin can be configured as input/output. + config GPIO_LOONGSON1 tristate "Loongson1 GPIO support" - depends on MACH_LOONGSON32 + depends on MACH_LOONGSON32 || COMPILE_TEST select GPIO_GENERIC help Say Y or M here to support GPIO on Loongson1 SoCs. @@ -765,22 +891,22 @@ config GPIO_LOONGSON1 config GPIO_AMD_FCH tristate "GPIO support for AMD Fusion Controller Hub (G-series SOCs)" help - This option enables driver for GPIO on AMDs Fusion Controller Hub, - as found on G-series SOCs (eg. GX-412TC) + This option enables driver for GPIO on AMD's Fusion Controller Hub, + as found on G-series SOCs (e.g. GX-412TC). - Note: This driver doesn't registers itself automatically, as it - needs to be provided with platform specific configuration. - (See eg. CONFIG_PCENGINES_APU2.) + Note: This driver doesn't register itself automatically, as it + needs to be provided with platform-specific configuration. + (See e.g. CONFIG_PCENGINES_APU2.) config GPIO_MSC313 bool "MStar MSC313 GPIO support" - depends on ARCH_MSTARV7 + depends on ARCH_MSTARV7 || COMPILE_TEST default ARCH_MSTARV7 select GPIOLIB_IRQCHIP select IRQ_DOMAIN_HIERARCHY help Say Y here to support the main GPIO block on MStar/SigmaStar - ARMv7 based SoCs. + ARMv7-based SoCs. config GPIO_IDT3243X tristate "IDT 79RC3243X GPIO support" @@ -789,7 +915,7 @@ config GPIO_IDT3243X select GPIOLIB_IRQCHIP help Select this option to enable GPIO driver for - IDT 79RC3243X based devices like Mikrotik RB532. + IDT 79RC3243X-based devices like Mikrotik RB532. To compile this driver as a module, choose M here: the module will be called gpio-idt3243x. @@ -797,13 +923,42 @@ config GPIO_IDT3243X endmenu menu "Port-mapped I/O GPIO drivers" - depends on X86 # Unconditional I/O space access + depends on X86 && HAS_IOPORT # I/O space access + +config GPIO_VX855 + tristate "VIA VX855/VX875 GPIO" + depends on PCI + select MFD_CORE + select MFD_VX855 + help + Support access to the VX855/VX875 GPIO lines through the GPIO library. + + This driver provides common support for accessing the device. + Additional drivers must be enabled in order to use the + functionality of the device. + +config GPIO_I8255 + tristate + select GPIO_REGMAP + help + Enables support for the i8255 interface library functions. The i8255 + interface library provides functions to facilitate communication with + interfaces compatible with the venerable Intel 8255 Programmable + Peripheral Interface (PPI). The Intel 8255 PPI chip was first released + in the early 1970s but compatible interfaces are nowadays typically + found embedded in larger VLSI processing chips and FPGA components. + + If built as a module its name will be gpio-i8255. config GPIO_104_DIO_48E tristate "ACCES 104-DIO-48E GPIO support" depends on PC104 select ISA_BUS_API + select REGMAP_MMIO + select REGMAP_IRQ select GPIOLIB_IRQCHIP + select GPIO_I8255 + select I8254 help Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E, 104-DIO-24E). The base port addresses for the devices may be @@ -814,7 +969,8 @@ config GPIO_104_IDIO_16 tristate "ACCES 104-IDIO-16 GPIO support" depends on PC104 select ISA_BUS_API - select GPIOLIB_IRQCHIP + select REGMAP_MMIO + select GPIO_IDIO_16 help Enables GPIO support for the ACCES 104-IDIO-16 family (104-IDIO-16, 104-IDIO-16E, 104-IDO-16, 104-IDIO-8, 104-IDIO-8E, 104-IDO-8). The @@ -826,7 +982,10 @@ config GPIO_104_IDI_48 tristate "ACCES 104-IDI-48 GPIO support" depends on PC104 select ISA_BUS_API + select REGMAP_MMIO + select REGMAP_IRQ select GPIOLIB_IRQCHIP + select GPIO_REGMAP help Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A, 104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for @@ -835,10 +994,11 @@ config GPIO_104_IDI_48 module parameter. config GPIO_F7188X - tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support" + tristate "Fintek and Nuvoton Super-I/O GPIO support" help This option enables support for GPIOs found on Fintek Super-I/O chips F71869, F71869A, F71882FG, F71889F and F81866. + As well as Nuvoton Super-I/O chip NCT6126D. To compile this driver as a module, choose M here: the module will be called f7188x-gpio. @@ -847,6 +1007,8 @@ config GPIO_GPIO_MM tristate "Diamond Systems GPIO-MM GPIO support" depends on PC104 select ISA_BUS_API + select REGMAP_MMIO + select GPIO_I8255 help Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12. @@ -867,7 +1029,7 @@ config GPIO_IT87 well. To compile this driver as a module, choose M here: the module will - be called gpio_it87 + be called gpio_it87. config GPIO_SCH tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" @@ -883,7 +1045,7 @@ config GPIO_SCH powered by the core power rail and are turned off during sleep modes (S3 and higher). The remaining four GPIOs are powered by the Intel SCH suspend power supply. These GPIOs remain - active during S3. The suspend powered GPIOs can be used to wake the + active during S3. The suspend-powered GPIOs can be used to wake the system from the Suspend-to-RAM state. The Intel Tunnel Creek processor has 5 GPIOs powered by the @@ -933,7 +1095,10 @@ config GPIO_WINBOND config GPIO_WS16C48 tristate "WinSystems WS16C48 GPIO support" select ISA_BUS_API + select REGMAP_IRQ + select REGMAP_MMIO select GPIOLIB_IRQCHIP + select GPIO_REGMAP help Enables GPIO support for the WinSystems WS16C48. The base port addresses for the devices may be configured via the base module @@ -945,20 +1110,6 @@ endmenu menu "I2C GPIO expanders" depends on I2C -config GPIO_ADP5588 - tristate "ADP5588 I2C GPIO expander" - help - This option enables support for 18 GPIOs found - on Analog Devices ADP5588 GPIO Expanders. - -config GPIO_ADP5588_IRQ - bool "Interrupt controller support for ADP5588" - depends on GPIO_ADP5588=y - select GPIOLIB_IRQCHIP - help - Say yes here to enable the adp5588 to be used as an interrupt - controller. It requires the driver to be built in the kernel. - config GPIO_ADNP tristate "Avionic Design N-bit GPIO expander" depends on OF_GPIO @@ -971,6 +1122,27 @@ config GPIO_ADNP enough to represent all pins, but the driver will assume a register layout for 64 pins (8 registers). +config GPIO_FXL6408 + tristate "FXL6408 I2C GPIO expander" + select GPIO_REGMAP + select REGMAP_I2C + help + GPIO driver for Fairchild Semiconductor FXL6408 GPIO expander. + + To compile this driver as a module, choose M here: the module will + be called gpio-fxl6408. + +config GPIO_DS4520 + tristate "DS4520 I2C GPIO expander" + select REGMAP_I2C + select GPIO_REGMAP + help + GPIO driver for ADI DS4520 I2C-based GPIO expander. + Say yes here to enable the GPIO driver for the ADI DS4520 chip. + + To compile this driver as a module, choose M here: the module will + be called gpio-ds4520. + config GPIO_GW_PLD tristate "Gateworks PLD GPIO Expander" depends on OF_GPIO @@ -1010,12 +1182,6 @@ config GPIO_MAX732X_IRQ Say yes here to enable the max732x to be used as an interrupt controller. It requires the driver to be built in the kernel. -config GPIO_MC9S08DZ60 - bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions" - depends on I2C=y && MACH_MX35_3DS - help - Select this to enable the MC9S08DZ60 GPIO driver - config GPIO_PCA953X tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports" select REGMAP_I2C @@ -1027,14 +1193,18 @@ config GPIO_PCA953X 4 bits: pca9536, pca9537 8 bits: max7310, max7315, pca6107, pca9534, pca9538, pca9554, - pca9556, pca9557, pca9574, tca6408, tca9554, xra1202 + pca9556, pca9557, pca9574, tca6408, tca9554, xra1202, + pcal6408, pcal9554b, tca9538 16 bits: max7312, max7313, pca9535, pca9539, pca9555, pca9575, - tca6416 + tca6416, pca6416, pcal6416, pcal9535, pcal9555a, max7318, + tca9539 - 24 bits: tca6424 + 18 bits: tca6418 - 40 bits: pca9505, pca9698 + 24 bits: tca6424, pcal6524 + + 40 bits: pca9505, pca9698, pca9506 config GPIO_PCA953X_IRQ bool "Interrupt controller support for PCA953x" @@ -1042,7 +1212,7 @@ config GPIO_PCA953X_IRQ select GPIOLIB_IRQCHIP help Say yes here to enable the pca953x to be used as an interrupt - controller. It requires the driver to be built in the kernel. + controller. config GPIO_PCA9570 tristate "PCA9570 4-Bit I2C GPO expander" @@ -1104,6 +1274,14 @@ config GPIO_ADP5520 This option enables support for on-chip GPIO found on Analog Devices ADP5520 PMICs. +config GPIO_ADP5585 + tristate "GPIO Support for ADP5585" + depends on MFD_ADP5585 + select GPIOLIB_IRQCHIP + help + This option enables support for the GPIO function found in the Analog + Devices ADP5585. + config GPIO_ALTERA_A10SR tristate "Altera Arria10 System Resource GPIO" depends on MFD_ALTERA_A10SR @@ -1118,17 +1296,6 @@ config GPIO_ARIZONA help Support for GPIOs on Wolfson Arizona class devices. -config GPIO_BD70528 - tristate "ROHM BD70528 GPIO support" - depends on MFD_ROHM_BD70528 - help - Support for GPIOs on ROHM BD70528 PMIC. There are four GPIOs - available on the ROHM PMIC in total. The GPIOs can also - generate interrupts. - - This driver can also be built as a module. If so, the module - will be called gpio-bd70528. - config GPIO_BD71815 tristate "ROHM BD71815 PMIC GPIO support" depends on MFD_ROHM_BD71828 @@ -1162,6 +1329,26 @@ config GPIO_BD9571MWV This driver can also be built as a module. If so, the module will be called gpio-bd9571mwv. +config GPIO_CGBC + tristate "Congatec Board Controller GPIO support" + depends on MFD_CGBC + help + Select this option to enable GPIO support for the Congatec Board + Controller. + + This driver can also be built as a module. If so, the module will be + called gpio-cgbc. + +config GPIO_CROS_EC + tristate "ChromeOS EC GPIO support" + depends on CROS_EC + help + GPIO driver for the ChromeOS Embedded Controller (EC). GPIOs + cannot be set unless the system is unlocked. + + This driver can also be built as a module. If so, the module + will be called gpio-cros-ec. + config GPIO_CRYSTAL_COVE tristate "GPIO support for Crystal Cove PMIC" depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC @@ -1169,7 +1356,7 @@ config GPIO_CRYSTAL_COVE help Support for GPIO pins on Crystal Cove PMIC. - Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC + Say Yes if you have a Intel SoC-based tablet with Crystal Cove PMIC inside. This driver can also be built as a module. If so, the module will be @@ -1199,7 +1386,7 @@ config GPIO_DA9055 Say yes here to enable the GPIO driver for the DA9055 chip. The Dialog DA9055 PMIC chip has 3 GPIO pins that can be - be controller by this driver. + be controlled by this driver. If driver is built as a module it will be called gpio-da9055. @@ -1217,11 +1404,22 @@ config GPIO_DLN2 config HTC_EGPIO bool "HTC EGPIO support" - depends on ARM + depends on ARM || COMPILE_TEST help This driver supports the CPLD egpio chip present on several HTC phones. It provides basic support for input - pins, output pins, and irqs. + pins, output pins, and IRQs. + +config GPIO_ELKHARTLAKE + tristate "Intel Elkhart Lake PSE GPIO support" + depends on INTEL_EHL_PSE_IO + select GPIO_TANGIER + help + Select this option to enable GPIO support for Intel Elkhart Lake + PSE GPIO IP. + + To compile this driver as a module, choose M here: the module will + be called gpio-elkhartlake. config GPIO_JANZ_TTL tristate "Janz VMOD-TTL Digital IO Module" @@ -1241,6 +1439,18 @@ config GPIO_KEMPLD This driver can also be built as a module. If so, the module will be called gpio-kempld. +config GPIO_LJCA + tristate "INTEL La Jolla Cove Adapter GPIO support" + depends on USB_LJCA + select GPIOLIB_IRQCHIP + default USB_LJCA + help + Select this option to enable GPIO driver for the INTEL + La Jolla Cove Adapter (LJCA) board. + + This driver can also be built as a module. If so, the module + will be called gpio-ljca. + config GPIO_LP3943 tristate "TI/National Semiconductor LP3943 GPIO expander" depends on MFD_LP3943 @@ -1269,12 +1479,34 @@ config GPIO_LP87565 This driver can also be built as a module. If so, the module will be called gpio-lp87565. +config GPIO_MACSMC + tristate "Apple Mac SMC GPIO" + depends on MFD_MACSMC + help + Support for GPIOs controlled by the SMC microcontroller on Apple Mac + systems. + + This driver can also be built as a module. If so, the module will be + called gpio-macsmc. + config GPIO_MADERA tristate "Cirrus Logic Madera class codecs" depends on PINCTRL_MADERA help Support for GPIOs on Cirrus Logic Madera class codecs. +config GPIO_MAX7360 + tristate "MAX7360 GPIO support" + depends on MFD_MAX7360 + select GPIO_REGMAP + select REGMAP_IRQ + help + Allows to use MAX7360 I/O Expander PWM lines as GPIO and keypad COL + lines as GPO. + + This driver can also be built as a module. If so, the module will be + called gpio-max7360. + config GPIO_MAX77620 tristate "GPIO support for PMIC MAX77620 and MAX20024" depends on MFD_MAX77620 @@ -1282,8 +1514,8 @@ config GPIO_MAX77620 help GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor. MAX77620 PMIC has 8 pins that can be configured as GPIOs. The - driver also provides interrupt support for each of the gpios. - Say yes here to enable the max77620 to be used as gpio controller. + driver also provides interrupt support for each of the GPIOs. + Say yes here to enable the max77620 to be used as GPIO controller. config GPIO_MAX77650 tristate "Maxim MAX77650/77651 GPIO support" @@ -1292,21 +1524,63 @@ config GPIO_MAX77650 GPIO driver for MAX77650/77651 PMIC from Maxim Semiconductor. These chips have a single pin that can be configured as GPIO. +config GPIO_MAX77759 + tristate "Maxim Integrated MAX77759 GPIO support" + depends on MFD_MAX77759 + default MFD_MAX77759 + select GPIOLIB_IRQCHIP + help + GPIO driver for MAX77759 PMIC from Maxim Integrated. + There are two GPIOs available on these chips in total, both of + which can also generate interrupts. + + This driver can also be built as a module. If so, the module will be + called gpio-max77759. + +config GPIO_NCT6694 + tristate "Nuvoton NCT6694 GPIO controller support" + depends on MFD_NCT6694 + select GENERIC_IRQ_CHIP + select GPIOLIB_IRQCHIP + help + This driver supports 8 GPIO pins per bank that can all be interrupt + sources. + + This driver can also be built as a module. If so, the module will be + called gpio-nct6694. + config GPIO_PALMAS - bool "TI PALMAS series PMICs GPIO" + tristate "TI PALMAS series PMICs GPIO" depends on MFD_PALMAS help Select this option to enable GPIO driver for the TI PALMAS series chip family. +config GPIO_PMIC_EIC_SPRD + tristate "Spreadtrum PMIC EIC support" + depends on MFD_SC27XX_PMIC || COMPILE_TEST + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + Say yes here to support Spreadtrum PMIC EIC device. + +config GPIO_QIXIS_FPGA + tristate "NXP QIXIS FPGA GPIO support" + depends on MFD_SIMPLE_MFD_I2C || COMPILE_TEST + select GPIO_REGMAP + help + This enables support for the GPIOs found in the QIXIS FPGA which is + integrated on some NXP Layerscape boards such as LX2160ARDB and + LS1046AQDS. + config GPIO_RC5T583 bool "RICOH RC5T583 GPIO" depends on MFD_RC5T583 help Select this option to enable GPIO driver for the Ricoh RC5T583 chip family. - This driver provides the support for driving/reading the gpio pins - of RC5T583 device through standard gpio library. + This driver provides the support for driving/reading the GPIO pins + of RC5T583 device through standard GPIO library. config GPIO_SL28CPLD tristate "Kontron sl28cpld GPIO support" @@ -1321,7 +1595,7 @@ config GPIO_SL28CPLD called gpio-sl28cpld. config GPIO_STMPE - bool "STMPE GPIOs" + tristate "STMPE GPIOs" depends on MFD_STMPE depends on OF_GPIO select GPIOLIB_IRQCHIP @@ -1341,9 +1615,22 @@ config GPIO_TC3589X config GPIO_TIMBERDALE bool "Support for timberdale GPIO IP" depends on MFD_TIMBERDALE + select GPIOLIB_IRQCHIP help Add support for the GPIO IP in the timberdale FPGA. +config GPIO_TN48M_CPLD + tristate "Delta Networks TN48M switch CPLD GPIO driver" + depends on MFD_TN48M_CPLD || COMPILE_TEST + select GPIO_REGMAP + help + This enables support for the GPIOs found on the Delta + Networks TN48M switch Lattice CPLD. It provides 12 pins in total, + they are input-only or output-only type. + + This driver can also be built as a module. If so, the + module will be called gpio-tn48m. + config GPIO_TPS65086 tristate "TI TPS65086 GPO" depends on MFD_TPS65086 @@ -1357,6 +1644,22 @@ config GPIO_TPS65218 Select this option to enable GPIO driver for the TPS65218 chip family. +config GPIO_TPS65219 + tristate "TPS65219 GPIO" + depends on MFD_TPS65219 + default MFD_TPS65219 + help + Select this option to enable GPIO driver for the TPS65219 chip + family. + GPIO0 is statically configured as either input or output prior to + Linux boot. It is used for MULTI_DEVICE_ENABLE function. This setting + is statically configured by NVM. GPIO0 can't be used as a generic + GPIO. It's either a GPO when MULTI_DEVICE_EN=0 or a GPI when + MULTI_DEVICE_EN=1. + + This driver can also be built as a module. If so, the module will be + called gpio_tps65219. + config GPIO_TPS6586X bool "TPS6586X GPIO" depends on MFD_TPS6586X @@ -1375,25 +1678,21 @@ config GPIO_TPS65912 tristate "TI TPS65912 GPIO" depends on MFD_TPS65912 help - This driver supports TPS65912 gpio chip + This driver supports TPS65912 GPIO chip. config GPIO_TPS68470 - bool "TPS68470 GPIO" + tristate "TPS68470 GPIO" depends on INTEL_SKL_INT3472 help Select this option to enable GPIO driver for the TPS68470 chip family. - There are 7 GPIOs and few sensor related GPIOs supported + There are 7 GPIOs and few sensor-related GPIOs supported by the TPS68470. While the 7 GPIOs can be configured as input or output as appropriate, the sensor related GPIOs are "output only" GPIOs. - This driver config is bool, as the GPIO functionality - of the TPS68470 must be available before dependent - drivers are loaded. - config GPIO_TQMX86 - tristate "TQ-Systems QTMX86 GPIO" + tristate "TQ-Systems TQMx86 GPIO" depends on MFD_TQMX86 || COMPILE_TEST depends on HAS_IOPORT_MAP select GPIOLIB_IRQCHIP @@ -1414,13 +1713,6 @@ config GPIO_TWL6040 Say yes here to access the GPO signals of twl6040 audio chip from Texas Instruments. -config GPIO_UCB1400 - tristate "Philips UCB1400 GPIO" - depends on UCB1400_CORE - help - This enables support for the Philips UCB1400 GPIO pins. - The UCB1400 is an AC97 audio codec. - config GPIO_WHISKEY_COVE tristate "GPIO support for Whiskey Cove PMIC" depends on (X86 || COMPILE_TEST) && INTEL_SOC_PMIC_BXTWC @@ -1428,7 +1720,7 @@ config GPIO_WHISKEY_COVE help Support for GPIO pins on Whiskey Cove PMIC. - Say Yes if you have a Intel SoC based tablet with Whiskey Cove PMIC + Say Yes if you have an Intel SoC-based tablet with Whiskey Cove PMIC inside. This driver can also be built as a module. If so, the module will be @@ -1465,17 +1757,17 @@ config GPIO_AMD8111 depends on X86 || COMPILE_TEST depends on HAS_IOPORT_MAP help - The AMD 8111 south bridge contains 32 GPIO pins which can be used. + The AMD 8111 southbridge contains 32 GPIO pins which can be used. - Note, that usually system firmware/ACPI handles GPIO pins on their - own and users might easily break their systems with uncarefull usage + Note that usually system firmware/ACPI handles GPIO pins on their + own and users might easily break their systems with uncareful usage of this driver! If unsure, say N config GPIO_BT8XX tristate "BT8XX GPIO abuser" - depends on VIDEO_BT848=n + depends on VIDEO_BT848=n || COMPILE_TEST help The BT8xx frame grabber chip has 24 GPIO pins that can be abused as a cheap PCI GPIO card. @@ -1492,7 +1784,7 @@ config GPIO_BT8XX config GPIO_MERRIFIELD tristate "Intel Merrifield GPIO support" depends on X86_INTEL_MID - select GPIOLIB_IRQCHIP + select GPIO_TANGIER help Say Y here to support Intel Merrifield GPIO. @@ -1507,38 +1799,53 @@ config GPIO_MLXBF2 tristate "Mellanox BlueField 2 SoC GPIO" depends on (MELLANOX_PLATFORM && ARM64 && ACPI) || (64BIT && COMPILE_TEST) select GPIO_GENERIC + select GPIOLIB_IRQCHIP help Say Y here if you want GPIO support on Mellanox BlueField 2 SoC. +config GPIO_MLXBF3 + tristate "Mellanox BlueField 3 SoC GPIO" + depends on (MELLANOX_PLATFORM && ARM64) || COMPILE_TEST + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say Y if you want GPIO support on Mellanox BlueField 3 SoC. + This GPIO controller supports interrupt handling and enables the + manipulation of certain GPIO pins. + This controller should be used in parallel with pinctrl-mlxbf3 to + control the desired GPIOs. + This driver can also be built as a module called mlxbf3-gpio. + config GPIO_ML_IOH tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" depends on X86 || COMPILE_TEST select GENERIC_IRQ_CHIP help ML7213 is companion chip for Intel Atom E6xx series. - This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output - Hub) which is for IVI(In-Vehicle Infotainment) use. + This driver can be used for OKI SEMICONDUCTOR ML7213 IOH (Input/Output + Hub) which is for IVI (In-Vehicle Infotainment) use. This driver can access the IOH's GPIO device. config GPIO_PCH - tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" + tristate "Intel EG20T PCH/LAPIS Semiconductor IOH (ML7223/ML7831) GPIO" depends on X86_32 || MIPS || COMPILE_TEST select GENERIC_IRQ_CHIP help - This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff - which is an IOH(Input/Output Hub) for x86 embedded processor. + This driver is for PCH (Platform Controller Hub) GPIO of Intel Topcliff, + which is an IOH (Input/Output Hub) for x86 embedded processor. This driver can access PCH GPIO device. - This driver also can be used for LAPIS Semiconductor IOH(Input/ + This driver also can be used for LAPIS Semiconductor IOH (Input/ Output Hub), ML7223 and ML7831. - ML7223 IOH is for MP(Media Phone) use. + ML7223 IOH is for MP (Media Phone) use. ML7831 IOH is for general purpose use. ML7223/ML7831 is companion chip for Intel Atom E6xx series. ML7223/ML7831 is completely compatible for Intel EG20T PCH. config GPIO_PCI_IDIO_16 tristate "ACCES PCI-IDIO-16 GPIO support" - select GPIOLIB_IRQCHIP + select REGMAP_MMIO + select GPIO_IDIO_16 help Enables GPIO support for the ACCES PCI-IDIO-16. An interrupt is generated when any of the inputs change state (low to high or high to @@ -1547,7 +1854,10 @@ config GPIO_PCI_IDIO_16 config GPIO_PCIE_IDIO_24 tristate "ACCES PCIe-IDIO-24 GPIO support" + select REGMAP_IRQ + select REGMAP_MMIO select GPIOLIB_IRQCHIP + select GPIO_REGMAP help Enables GPIO support for the ACCES PCIe-IDIO-24 family (PCIe-IDIO-24, PCIe-IDI-24, PCIe-IDO-24, PCIe-IDIO-12). An interrupt is generated @@ -1578,11 +1888,10 @@ menu "SPI GPIO expanders" config GPIO_74X164 tristate "74x164 serial-in/parallel-out 8-bits shift register" - depends on OF_GPIO help Driver for 74x164 compatible serial-in/parallel-out 8-outputs shift registers. This driver can be used to provide access - to more gpio outputs. + to more GPIO outputs. config GPIO_MAX3191X tristate "Maxim MAX3191x industrial serializer" @@ -1643,12 +1952,32 @@ config GPIO_VIPERBOARD River Tech's viperboard.h for detailed meaning of the module parameters. +config GPIO_MPSSE + tristate "FTDI MPSSE GPIO support" + select GPIOLIB_IRQCHIP + help + GPIO driver for FTDI's MPSSE interface. These can do input and + output. Each MPSSE provides 16 IO pins. + +config GPIO_USBIO + tristate "Intel USBIO GPIO support" + depends on USB_USBIO + default USB_USBIO + help + Select this option to enable GPIO driver for the INTEL + USBIO driver stack. + + This driver can also be built as a module. If so, the module + will be called gpio_usbio. + endmenu menu "Virtual GPIO drivers" config GPIO_AGGREGATOR tristate "GPIO Aggregator" + select CONFIGFS_FS + select DEV_SYNC_PROBE help Say yes here to enable the GPIO Aggregator, which provides a way to aggregate existing GPIO lines into a new virtual GPIO chip. @@ -1659,16 +1988,87 @@ config GPIO_AGGREGATOR industrial control context, to be operated from userspace using the GPIO chardev interface. +config GPIO_LATCH + tristate "GPIO latch driver" + help + Say yes here to enable a driver for GPIO multiplexers based on latches + connected to other GPIOs. + config GPIO_MOCKUP - tristate "GPIO Testing Driver" + tristate "GPIO Testing Driver (DEPRECATED)" select IRQ_SIM help + This module is DEPRECATED. Please consider using gpio-sim instead. + This enables GPIO Testing driver, which provides a way to test GPIO subsystem through sysfs (or char device) and debugfs. User could use it through the script in tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in it. +config GPIO_VIRTIO + tristate "VirtIO GPIO support" + depends on VIRTIO + select GPIOLIB_IRQCHIP + help + Say Y here to enable guest support for virtio-based GPIO controllers. + + These virtual GPIOs can be routed to real GPIOs or attached to + simulators on the host (like QEMU). + +config GPIO_SIM + tristate "GPIO Simulator Module" + select IRQ_SIM + select CONFIGFS_FS + select DEV_SYNC_PROBE + help + This enables the GPIO simulator - a configfs-based GPIO testing + driver. + +config GPIO_SHARED_PROXY + tristate "Proxy driver for non-exclusive GPIOs" + default m + depends on GPIO_SHARED || COMPILE_TEST + select AUXILIARY_BUS + help + This enables the GPIO shared proxy driver - an abstraction layer + for GPIO pins that are shared by multiple devices. + +endmenu + +menu "GPIO Debugging utilities" + +config GPIO_SLOPPY_LOGIC_ANALYZER + tristate "Sloppy GPIO logic analyzer" + depends on (GPIOLIB || COMPILE_TEST) && CPUSETS && DEBUG_FS && EXPERT + help + This option enables support for a sloppy logic analyzer using polled + GPIOs. Use the 'tools/gpio/gpio-sloppy-logic-analyzer' script with + this driver. The script will make it easier to use and will also + isolate a CPU for the polling task. Note that this is a last resort + analyzer which can be affected by latencies, non-deterministic code + paths, or NMIs. However, for e.g. remote development, it may be useful + to get a first view and aid further debugging. + + If this driver is built as a module it will be called + 'gpio-sloppy-logic-analyzer'. + +config GPIO_VIRTUSER + tristate "GPIO Virtual User Testing Module" + select DEBUG_FS + select CONFIGFS_FS + select IRQ_WORK + select DEV_SYNC_PROBE + help + Say Y here to enable the configurable, configfs-based virtual GPIO + consumer testing driver. + + This driver is aimed as a helper in spotting any regressions in + hot-unplug handling in GPIOLIB. + endmenu endif + +config DEV_SYNC_PROBE + tristate |