diff options
Diffstat (limited to 'drivers/gpio/gpiolib-of.c')
| -rw-r--r-- | drivers/gpio/gpiolib-of.c | 1066 |
1 files changed, 615 insertions, 451 deletions
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index bbcc7c073f63..8657379e9165 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -10,22 +10,68 @@ #include <linux/device.h> #include <linux/err.h> #include <linux/errno.h> -#include <linux/module.h> #include <linux/io.h> -#include <linux/gpio/consumer.h> +#include <linux/module.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_gpio.h> #include <linux/pinctrl/pinctrl.h> #include <linux/slab.h> +#include <linux/string.h> + +#include <linux/gpio/consumer.h> #include <linux/gpio/machine.h> #include "gpiolib.h" #include "gpiolib-of.h" +/* + * This is Linux-specific flags. By default controllers' and Linux' mapping + * match, but GPIO controllers are free to translate their own flags to + * Linux-specific in their .xlate callback. Though, 1:1 mapping is recommended. + */ +enum of_gpio_flags { + OF_GPIO_ACTIVE_LOW = 0x1, + OF_GPIO_SINGLE_ENDED = 0x2, + OF_GPIO_OPEN_DRAIN = 0x4, + OF_GPIO_TRANSITORY = 0x8, + OF_GPIO_PULL_UP = 0x10, + OF_GPIO_PULL_DOWN = 0x20, + OF_GPIO_PULL_DISABLE = 0x40, +}; + +/** + * of_gpio_named_count() - Count GPIOs for a device + * @np: device node to count GPIOs for + * @propname: property name containing gpio specifier(s) + * + * The function returns the count of GPIOs specified for a node. + * NOTE: The empty GPIO specifiers count too. + * + * Returns: + * Either number of GPIOs defined in the property, or + * * %-EINVAL for an incorrectly formed "gpios" property, or + * * %-ENOENT for a missing "gpios" property. + * + * Example:: + * + * gpios = <0 + * &gpio1 1 2 + * 0 + * &gpio2 3 4>; + * + * The above example defines four GPIOs, two of which are not specified. + * This function will return '4' + */ +static int of_gpio_named_count(const struct device_node *np, + const char *propname) +{ + return of_count_phandle_with_args(np, propname, "#gpio-cells"); +} + /** * of_gpio_spi_cs_get_count() - special GPIO counting for SPI - * @dev: Consuming device + * @np: Consuming device node * @con_id: Function within the GPIO consumer * * Some elder GPIO controllers need special quirks. Currently we handle @@ -34,11 +80,15 @@ * "gpios" for the chip select lines. If we detect this, we redirect * the counting of "cs-gpios" to count "gpios" transparent to the * driver. + * + * Returns: + * Either number of GPIOs defined in the property, or + * * %-EINVAL for an incorrectly formed "gpios" property, or + * * %-ENOENT for a missing "gpios" property. */ -static int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id) +static int of_gpio_spi_cs_get_count(const struct device_node *np, + const char *con_id) { - struct device_node *np = dev->of_node; - if (!IS_ENABLED(CONFIG_SPI_MASTER)) return 0; if (!con_id || strcmp(con_id, "cs")) @@ -50,50 +100,38 @@ static int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id) return of_gpio_named_count(np, "gpios"); } -/* - * This is used by external users of of_gpio_count() from <linux/of_gpio.h> - * - * FIXME: get rid of those external users by converting them to GPIO - * descriptors and let them all use gpiod_count() - */ -int of_gpio_get_count(struct device *dev, const char *con_id) +int of_gpio_count(const struct fwnode_handle *fwnode, const char *con_id) { + const struct device_node *np = to_of_node(fwnode); int ret; char propname[32]; - unsigned int i; - ret = of_gpio_spi_cs_get_count(dev, con_id); + ret = of_gpio_spi_cs_get_count(np, con_id); if (ret > 0) return ret; - for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) { - if (con_id) - snprintf(propname, sizeof(propname), "%s-%s", - con_id, gpio_suffixes[i]); - else - snprintf(propname, sizeof(propname), "%s", - gpio_suffixes[i]); - - ret = of_gpio_named_count(dev->of_node, propname); + for_each_gpio_property_name(propname, con_id) { + ret = of_gpio_named_count(np, propname); if (ret > 0) break; } return ret ? ret : -ENOENT; } -static int of_gpiochip_match_node_and_xlate(struct gpio_chip *chip, void *data) +static int of_gpiochip_match_node_and_xlate(struct gpio_chip *chip, + const void *data) { - struct of_phandle_args *gpiospec = data; + const struct of_phandle_args *gpiospec = data; - return chip->gpiodev->dev.of_node == gpiospec->np && + return device_match_of_node(&chip->gpiodev->dev, gpiospec->np) && chip->of_xlate && chip->of_xlate(chip, gpiospec, NULL) >= 0; } -static struct gpio_chip *of_find_gpiochip_by_xlate( - struct of_phandle_args *gpiospec) +static struct gpio_device * +of_find_gpio_device_by_xlate(const struct of_phandle_args *gpiospec) { - return gpiochip_find(gpiospec, of_gpiochip_match_node_and_xlate); + return gpio_device_find(gpiospec, of_gpiochip_match_node_and_xlate); } static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip, @@ -112,55 +150,196 @@ static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip, return gpiochip_get_desc(chip, ret); } -/** - * of_gpio_need_valid_mask() - figure out if the OF GPIO driver needs - * to set the .valid_mask - * @gc: the target gpio_chip - * - * Return: true if the valid mask needs to be set +/* + * Overrides stated polarity of a gpio line and warns when there is a + * discrepancy. */ -bool of_gpio_need_valid_mask(const struct gpio_chip *gc) +static void of_gpio_quirk_polarity(const struct device_node *np, + bool active_high, + enum of_gpio_flags *flags) { - int size; - struct device_node *np = gc->of_node; + if (active_high) { + if (*flags & OF_GPIO_ACTIVE_LOW) { + pr_warn("%s GPIO handle specifies active low - ignored\n", + of_node_full_name(np)); + *flags &= ~OF_GPIO_ACTIVE_LOW; + } + } else { + if (!(*flags & OF_GPIO_ACTIVE_LOW)) + pr_info("%s enforce active low on GPIO handle\n", + of_node_full_name(np)); + *flags |= OF_GPIO_ACTIVE_LOW; + } +} - size = of_property_count_u32_elems(np, "gpio-reserved-ranges"); - if (size > 0 && size % 2 == 0) - return true; - return false; +/* + * This quirk does static polarity overrides in cases where existing + * DTS specified incorrect polarity. + */ +static void of_gpio_try_fixup_polarity(const struct device_node *np, + const char *propname, + enum of_gpio_flags *flags) +{ + static const struct { + const char *compatible; + const char *propname; + bool active_high; + } gpios[] = { +#if IS_ENABLED(CONFIG_LCD_HX8357) + /* + * Himax LCD controllers used incorrectly named + * "gpios-reset" property and also specified wrong + * polarity. + */ + { "himax,hx8357", "gpios-reset", false }, + { "himax,hx8369", "gpios-reset", false }, +#endif +#if IS_ENABLED(CONFIG_MTD_NAND_JZ4780) + /* + * The rb-gpios semantics was undocumented and qi,lb60 (along with + * the ingenic driver) got it wrong. The active state encodes the + * NAND ready state, which is high level. Since there's no signal + * inverter on this board, it should be active-high. Let's fix that + * here for older DTs so we can re-use the generic nand_gpio_waitrdy() + * helper, and be consistent with what other drivers do. + */ + { "qi,lb60", "rb-gpios", true }, +#endif +#if IS_ENABLED(CONFIG_IEEE802154_CA8210) + /* + * According to the datasheet, the NRST pin 27 is an active-low + * signal. However, the device tree schema and admittedly + * the out-of-tree implementations have been used for a long + * time incorrectly by describing reset GPIO as active-high. + */ + { "cascoda,ca8210", "reset-gpio", false }, +#endif +#if IS_ENABLED(CONFIG_PCI_LANTIQ) + /* + * According to the PCI specification, the RST# pin is an + * active-low signal. However, most of the device trees that + * have been widely used for a long time incorrectly describe + * reset GPIO as active-high, and were also using wrong name + * for the property. + */ + { "lantiq,pci-xway", "gpio-reset", false }, +#endif +#if IS_ENABLED(CONFIG_REGULATOR_S5M8767) + /* + * According to S5M8767, the DVS and DS pin are + * active-high signals. However, exynos5250-spring.dts use + * active-low setting. + */ + { "samsung,s5m8767-pmic", "s5m8767,pmic-buck-dvs-gpios", true }, + { "samsung,s5m8767-pmic", "s5m8767,pmic-buck-ds-gpios", true }, +#endif +#if IS_ENABLED(CONFIG_TOUCHSCREEN_TSC2005) + /* + * DTS for Nokia N900 incorrectly specified "active high" + * polarity for the reset line, while the chip actually + * treats it as "active low". + */ + { "ti,tsc2005", "reset-gpios", false }, +#endif + }; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + if (of_device_is_compatible(np, gpios[i].compatible) && + !strcmp(propname, gpios[i].propname)) { + of_gpio_quirk_polarity(np, gpios[i].active_high, flags); + break; + } + } } -static void of_gpio_flags_quirks(struct device_node *np, - const char *propname, - enum of_gpio_flags *flags, - int index) +static void of_gpio_set_polarity_by_property(const struct device_node *np, + const char *propname, + enum of_gpio_flags *flags) { - /* - * Some GPIO fixed regulator quirks. - * Note that active low is the default. - */ - if (IS_ENABLED(CONFIG_REGULATOR) && - (of_device_is_compatible(np, "regulator-fixed") || - of_device_is_compatible(np, "reg-fixed-voltage") || - (!(strcmp(propname, "enable-gpio") && - strcmp(propname, "enable-gpios")) && - of_device_is_compatible(np, "regulator-gpio")))) { - bool active_low = !of_property_read_bool(np, - "enable-active-high"); + const struct device_node *np_compat = np; + const struct device_node *np_propname = np; + static const struct { + const char *compatible; + const char *gpio_propname; + const char *polarity_propname; + } gpios[] = { +#if IS_ENABLED(CONFIG_FEC) + /* Freescale Fast Ethernet Controller */ + { "fsl,imx25-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx27-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx28-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx6q-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,mvf600-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx6sx-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx6ul-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx8mq-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,imx8qm-fec", "phy-reset-gpios", "phy-reset-active-high" }, + { "fsl,s32v234-fec", "phy-reset-gpios", "phy-reset-active-high" }, +#endif +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) + { "atmel,hsmci", "cd-gpios", "cd-inverted" }, +#endif +#if IS_ENABLED(CONFIG_PCI_IMX6) + { "fsl,imx6q-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx6sx-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx6qp-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx7d-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx8mq-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx8mm-pcie", "reset-gpio", "reset-gpio-active-high" }, + { "fsl,imx8mp-pcie", "reset-gpio", "reset-gpio-active-high" }, +#endif + /* * The regulator GPIO handles are specified such that the * presence or absence of "enable-active-high" solely controls * the polarity of the GPIO line. Any phandle flags must * be actively ignored. */ - if ((*flags & OF_GPIO_ACTIVE_LOW) && !active_low) { - pr_warn("%s GPIO handle specifies active low - ignored\n", - of_node_full_name(np)); - *flags &= ~OF_GPIO_ACTIVE_LOW; +#if IS_ENABLED(CONFIG_REGULATOR_FIXED_VOLTAGE) + { "regulator-fixed", "gpios", "enable-active-high" }, + { "regulator-fixed", "gpio", "enable-active-high" }, + { "reg-fixed-voltage", "gpios", "enable-active-high" }, + { "reg-fixed-voltage", "gpio", "enable-active-high" }, +#endif +#if IS_ENABLED(CONFIG_REGULATOR_GPIO) + { "regulator-gpio", "enable-gpio", "enable-active-high" }, + { "regulator-gpio", "enable-gpios", "enable-active-high" }, +#endif + }; + unsigned int i; + bool active_high; + +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) + /* + * The Atmel HSMCI has compatible property in the parent node and + * gpio property in a child node + */ + if (of_device_is_compatible(np->parent, "atmel,hsmci")) { + np_compat = np->parent; + np_propname = np; + } +#endif + + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + if (of_device_is_compatible(np_compat, gpios[i].compatible) && + !strcmp(propname, gpios[i].gpio_propname)) { + active_high = of_property_read_bool(np_propname, + gpios[i].polarity_propname); + of_gpio_quirk_polarity(np, active_high, flags); + break; } - if (active_low) - *flags |= OF_GPIO_ACTIVE_LOW; } +} + +static void of_gpio_flags_quirks(const struct device_node *np, + const char *propname, + enum of_gpio_flags *flags, + int index) +{ + of_gpio_try_fixup_polarity(np, propname, flags); + of_gpio_set_polarity_by_property(np, propname, flags); + /* * Legacy open drain handling for fixed voltage regulators. */ @@ -178,12 +357,11 @@ static void of_gpio_flags_quirks(struct device_node *np, * to determine if the flags should have inverted semantics. */ if (IS_ENABLED(CONFIG_SPI_MASTER) && !strcmp(propname, "cs-gpios") && - of_property_read_bool(np, "cs-gpios")) { - struct device_node *child; + of_property_present(np, "cs-gpios")) { u32 cs; int ret; - for_each_child_of_node(np, child) { + for_each_child_of_node_scoped(np, child) { ret = of_property_read_u32(child, "reg", &cs); if (ret) continue; @@ -200,19 +378,10 @@ static void of_gpio_flags_quirks(struct device_node *np, * conflict and the "spi-cs-high" flag will * take precedence. */ - if (of_property_read_bool(child, "spi-cs-high")) { - if (*flags & OF_GPIO_ACTIVE_LOW) { - pr_warn("%s GPIO handle specifies active low - ignored\n", - of_node_full_name(child)); - *flags &= ~OF_GPIO_ACTIVE_LOW; - } - } else { - if (!(*flags & OF_GPIO_ACTIVE_LOW)) - pr_info("%s enforce active low on chipselect handle\n", - of_node_full_name(child)); - *flags |= OF_GPIO_ACTIVE_LOW; - } - of_node_put(child); + bool active_high = of_property_read_bool(child, + "spi-cs-high"); + of_gpio_quirk_polarity(child, active_high, + flags); break; } } @@ -232,15 +401,15 @@ static void of_gpio_flags_quirks(struct device_node *np, * @index: index of the GPIO * @flags: a flags pointer to fill in * - * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno + * Returns: + * GPIO descriptor to use with Linux GPIO API, or one of the errno * value on the error condition. If @flags is not NULL the function also fills * in flags for the GPIO. */ -static struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np, +static struct gpio_desc *of_get_named_gpiod_flags(const struct device_node *np, const char *propname, int index, enum of_gpio_flags *flags) { struct of_phandle_args gpiospec; - struct gpio_chip *chip; struct gpio_desc *desc; int ret; @@ -252,13 +421,15 @@ static struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np, return ERR_PTR(ret); } - chip = of_find_gpiochip_by_xlate(&gpiospec); - if (!chip) { + struct gpio_device *gdev __free(gpio_device_put) = + of_find_gpio_device_by_xlate(&gpiospec); + if (!gdev) { desc = ERR_PTR(-EPROBE_DEFER); goto out; } - desc = of_xlate_and_get_gpiod_flags(chip, &gpiospec, flags); + desc = of_xlate_and_get_gpiod_flags(gpio_device_get_chip(gdev), + &gpiospec, flags); if (IS_ERR(desc)) goto out; @@ -275,77 +446,48 @@ out: return desc; } -int of_get_named_gpio_flags(struct device_node *np, const char *list_name, - int index, enum of_gpio_flags *flags) +/** + * of_get_named_gpio() - Get a GPIO number to use with GPIO API + * @np: device node to get GPIO from + * @propname: Name of property containing gpio specifier(s) + * @index: index of the GPIO + * + * **DEPRECATED** This function is deprecated and must not be used in new code. + * + * Returns: + * GPIO number to use with Linux generic GPIO API, or one of the errno + * value on the error condition. + */ +int of_get_named_gpio(const struct device_node *np, const char *propname, + int index) { struct gpio_desc *desc; - desc = of_get_named_gpiod_flags(np, list_name, index, flags); + desc = of_get_named_gpiod_flags(np, propname, index, NULL); if (IS_ERR(desc)) return PTR_ERR(desc); else return desc_to_gpio(desc); } -EXPORT_SYMBOL_GPL(of_get_named_gpio_flags); +EXPORT_SYMBOL_GPL(of_get_named_gpio); -/** - * gpiod_get_from_of_node() - obtain a GPIO from an OF node - * @node: handle of the OF node - * @propname: name of the DT property representing the GPIO - * @index: index of the GPIO to obtain for the consumer - * @dflags: GPIO initialization flags - * @label: label to attach to the requested GPIO - * - * Returns: - * On successful request the GPIO pin is configured in accordance with - * provided @dflags. - * - * In case of error an ERR_PTR() is returned. - */ -struct gpio_desc *gpiod_get_from_of_node(struct device_node *node, - const char *propname, int index, - enum gpiod_flags dflags, - const char *label) +/* Converts gpio_lookup_flags into bitmask of GPIO_* values */ +static unsigned long of_convert_gpio_flags(enum of_gpio_flags flags) { unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT; - struct gpio_desc *desc; - enum of_gpio_flags flags; - bool active_low = false; - bool single_ended = false; - bool open_drain = false; - bool transitory = false; - int ret; - - desc = of_get_named_gpiod_flags(node, propname, - index, &flags); - if (!desc || IS_ERR(desc)) { - return desc; - } - - active_low = flags & OF_GPIO_ACTIVE_LOW; - single_ended = flags & OF_GPIO_SINGLE_ENDED; - open_drain = flags & OF_GPIO_OPEN_DRAIN; - transitory = flags & OF_GPIO_TRANSITORY; - - ret = gpiod_request(desc, label); - if (ret == -EBUSY && (dflags & GPIOD_FLAGS_BIT_NONEXCLUSIVE)) - return desc; - if (ret) - return ERR_PTR(ret); - - if (active_low) + if (flags & OF_GPIO_ACTIVE_LOW) lflags |= GPIO_ACTIVE_LOW; - if (single_ended) { - if (open_drain) + if (flags & OF_GPIO_SINGLE_ENDED) { + if (flags & OF_GPIO_OPEN_DRAIN) lflags |= GPIO_OPEN_DRAIN; else lflags |= GPIO_OPEN_SOURCE; } - if (transitory) + if (flags & OF_GPIO_TRANSITORY) lflags |= GPIO_TRANSITORY; if (flags & OF_GPIO_PULL_UP) @@ -354,208 +496,237 @@ struct gpio_desc *gpiod_get_from_of_node(struct device_node *node, if (flags & OF_GPIO_PULL_DOWN) lflags |= GPIO_PULL_DOWN; - ret = gpiod_configure_flags(desc, propname, lflags, dflags); - if (ret < 0) { - gpiod_put(desc); - return ERR_PTR(ret); - } + if (flags & OF_GPIO_PULL_DISABLE) + lflags |= GPIO_PULL_DISABLE; - return desc; + return lflags; } -EXPORT_SYMBOL_GPL(gpiod_get_from_of_node); -/* - * The SPI GPIO bindings happened before we managed to establish that GPIO - * properties should be named "foo-gpios" so we have this special kludge for - * them. - */ -static struct gpio_desc *of_find_spi_gpio(struct device *dev, const char *con_id, - enum of_gpio_flags *of_flags) +static struct gpio_desc *of_find_gpio_rename(struct device_node *np, + const char *con_id, + unsigned int idx, + enum of_gpio_flags *of_flags) { - char prop_name[32]; /* 32 is max size of property name */ - struct device_node *np = dev->of_node; + static const struct of_rename_gpio { + const char *con_id; + const char *legacy_id; /* NULL - same as con_id */ + /* + * Compatible string can be set to NULL in case where + * matching to a particular compatible is not practical, + * but it should only be done for gpio names that have + * vendor prefix to reduce risk of false positives. + * Addition of such entries is strongly discouraged. + */ + const char *compatible; + } gpios[] = { +#if IS_ENABLED(CONFIG_LCD_HX8357) + /* Himax LCD controllers used "gpios-reset" */ + { "reset", "gpios-reset", "himax,hx8357" }, + { "reset", "gpios-reset", "himax,hx8369" }, +#endif +#if IS_ENABLED(CONFIG_MFD_ARIZONA) + { "wlf,reset", NULL, NULL }, +#endif +#if IS_ENABLED(CONFIG_RTC_DRV_MOXART) + { "rtc-data", "gpio-rtc-data", "moxa,moxart-rtc" }, + { "rtc-sclk", "gpio-rtc-sclk", "moxa,moxart-rtc" }, + { "rtc-reset", "gpio-rtc-reset", "moxa,moxart-rtc" }, +#endif +#if IS_ENABLED(CONFIG_NFC_MRVL_I2C) + { "reset", "reset-n-io", "marvell,nfc-i2c" }, +#endif +#if IS_ENABLED(CONFIG_NFC_MRVL_SPI) + { "reset", "reset-n-io", "marvell,nfc-spi" }, +#endif +#if IS_ENABLED(CONFIG_NFC_MRVL_UART) + { "reset", "reset-n-io", "marvell,nfc-uart" }, + { "reset", "reset-n-io", "mrvl,nfc-uart" }, +#endif +#if IS_ENABLED(CONFIG_PCI_LANTIQ) + /* MIPS Lantiq PCI */ + { "reset", "gpio-reset", "lantiq,pci-xway" }, +#endif + + /* + * Some regulator bindings happened before we managed to + * establish that GPIO properties should be named + * "foo-gpios" so we have this special kludge for them. + */ +#if IS_ENABLED(CONFIG_REGULATOR_ARIZONA_LDO1) + { "wlf,ldoena", NULL, NULL }, /* Arizona */ +#endif +#if IS_ENABLED(CONFIG_REGULATOR_WM8994) + { "wlf,ldo1ena", NULL, NULL }, /* WM8994 */ + { "wlf,ldo2ena", NULL, NULL }, /* WM8994 */ +#endif + +#if IS_ENABLED(CONFIG_SND_SOC_CS42L56) + { "reset", "cirrus,gpio-nreset", "cirrus,cs42l56" }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_MT2701_CS42448) + { "i2s1-in-sel-gpio1", NULL, "mediatek,mt2701-cs42448-machine" }, + { "i2s1-in-sel-gpio2", NULL, "mediatek,mt2701-cs42448-machine" }, +#endif +#if IS_ENABLED(CONFIG_SND_SOC_TLV320AIC3X) + { "reset", "gpio-reset", "ti,tlv320aic3x" }, + { "reset", "gpio-reset", "ti,tlv320aic33" }, + { "reset", "gpio-reset", "ti,tlv320aic3007" }, + { "reset", "gpio-reset", "ti,tlv320aic3104" }, + { "reset", "gpio-reset", "ti,tlv320aic3106" }, +#endif +#if IS_ENABLED(CONFIG_SPI_GPIO) + /* + * The SPI GPIO bindings happened before we managed to + * establish that GPIO properties should be named + * "foo-gpios" so we have this special kludge for them. + */ + { "miso", "gpio-miso", "spi-gpio" }, + { "mosi", "gpio-mosi", "spi-gpio" }, + { "sck", "gpio-sck", "spi-gpio" }, +#endif + + /* + * The old Freescale bindings use simply "gpios" as name + * for the chip select lines rather than "cs-gpios" like + * all other SPI hardware. Allow this specifically for + * Freescale and PPC devices. + */ +#if IS_ENABLED(CONFIG_SPI_FSL_SPI) + { "cs", "gpios", "fsl,spi" }, + { "cs", "gpios", "aeroflexgaisler,spictrl" }, +#endif +#if IS_ENABLED(CONFIG_SPI_PPC4xx) + { "cs", "gpios", "ibm,ppc4xx-spi" }, +#endif + +#if IS_ENABLED(CONFIG_TYPEC_FUSB302) + /* + * Fairchild FUSB302 host is using undocumented "fcs,int_n" + * property without the compulsory "-gpios" suffix. + */ + { "fcs,int_n", NULL, "fcs,fusb302" }, +#endif + }; struct gpio_desc *desc; + const char *legacy_id; + unsigned int i; - /* - * Hopefully the compiler stubs the rest of the function if this - * is false. - */ - if (!IS_ENABLED(CONFIG_SPI_MASTER)) + if (!con_id) return ERR_PTR(-ENOENT); - /* Allow this specifically for "spi-gpio" devices */ - if (!of_device_is_compatible(np, "spi-gpio") || !con_id) - return ERR_PTR(-ENOENT); + for (i = 0; i < ARRAY_SIZE(gpios); i++) { + if (strcmp(con_id, gpios[i].con_id)) + continue; - /* Will be "gpio-sck", "gpio-mosi" or "gpio-miso" */ - snprintf(prop_name, sizeof(prop_name), "%s-%s", "gpio", con_id); + if (gpios[i].compatible && + !of_device_is_compatible(np, gpios[i].compatible)) + continue; - desc = of_get_named_gpiod_flags(np, prop_name, 0, of_flags); - return desc; + legacy_id = gpios[i].legacy_id ?: gpios[i].con_id; + desc = of_get_named_gpiod_flags(np, legacy_id, idx, of_flags); + if (!gpiod_not_found(desc)) { + pr_info("%s uses legacy gpio name '%s' instead of '%s-gpios'\n", + of_node_full_name(np), legacy_id, con_id); + return desc; + } + } + + return ERR_PTR(-ENOENT); } -/* - * The old Freescale bindings use simply "gpios" as name for the chip select - * lines rather than "cs-gpios" like all other SPI hardware. Account for this - * with a special quirk. - */ -static struct gpio_desc *of_find_spi_cs_gpio(struct device *dev, +static struct gpio_desc *of_find_mt2701_gpio(struct device_node *np, const char *con_id, unsigned int idx, - unsigned long *flags) + enum of_gpio_flags *of_flags) { - struct device_node *np = dev->of_node; + struct gpio_desc *desc; + const char *legacy_id; - if (!IS_ENABLED(CONFIG_SPI_MASTER)) + if (!IS_ENABLED(CONFIG_SND_SOC_MT2701_CS42448)) return ERR_PTR(-ENOENT); - /* Allow this specifically for Freescale and PPC devices */ - if (!of_device_is_compatible(np, "fsl,spi") && - !of_device_is_compatible(np, "aeroflexgaisler,spictrl") && - !of_device_is_compatible(np, "ibm,ppc4xx-spi")) - return ERR_PTR(-ENOENT); - /* Allow only if asking for "cs-gpios" */ - if (!con_id || strcmp(con_id, "cs")) + if (!of_device_is_compatible(np, "mediatek,mt2701-cs42448-machine")) return ERR_PTR(-ENOENT); - /* - * While all other SPI controllers use "cs-gpios" the Freescale - * uses just "gpios" so translate to that when "cs-gpios" is - * requested. - */ - return of_find_gpio(dev, NULL, idx, flags); -} - -/* - * Some regulator bindings happened before we managed to establish that GPIO - * properties should be named "foo-gpios" so we have this special kludge for - * them. - */ -static struct gpio_desc *of_find_regulator_gpio(struct device *dev, const char *con_id, - enum of_gpio_flags *of_flags) -{ - /* These are the connection IDs we accept as legacy GPIO phandles */ - const char *whitelist[] = { - "wlf,ldoena", /* Arizona */ - "wlf,ldo1ena", /* WM8994 */ - "wlf,ldo2ena", /* WM8994 */ - }; - struct device_node *np = dev->of_node; - struct gpio_desc *desc; - int i; - - if (!IS_ENABLED(CONFIG_REGULATOR)) + if (!con_id || strcmp(con_id, "i2s1-in-sel")) return ERR_PTR(-ENOENT); - if (!con_id) + if (idx == 0) + legacy_id = "i2s1-in-sel-gpio1"; + else if (idx == 1) + legacy_id = "i2s1-in-sel-gpio2"; + else return ERR_PTR(-ENOENT); - i = match_string(whitelist, ARRAY_SIZE(whitelist), con_id); - if (i < 0) - return ERR_PTR(-ENOENT); + desc = of_get_named_gpiod_flags(np, legacy_id, 0, of_flags); + if (!gpiod_not_found(desc)) + pr_info("%s is using legacy gpio name '%s' instead of '%s-gpios'\n", + of_node_full_name(np), legacy_id, con_id); - desc = of_get_named_gpiod_flags(np, con_id, 0, of_flags); return desc; } -static struct gpio_desc *of_find_arizona_gpio(struct device *dev, +/* + * Trigger sources are special, they allow us to use any GPIO as a LED trigger + * and have the name "trigger-sources" no matter which kind of phandle it is + * pointing to, whether to a GPIO, a USB host, a network PHY etc. So in this case + * we allow looking something up that is not named "foo-gpios". + */ +static struct gpio_desc *of_find_trigger_gpio(struct device_node *np, const char *con_id, + unsigned int idx, enum of_gpio_flags *of_flags) { - if (!IS_ENABLED(CONFIG_MFD_ARIZONA)) - return ERR_PTR(-ENOENT); + struct gpio_desc *desc; - if (!con_id || strcmp(con_id, "wlf,reset")) + if (!IS_ENABLED(CONFIG_LEDS_TRIGGER_GPIO)) return ERR_PTR(-ENOENT); - return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags); -} - -static struct gpio_desc *of_find_usb_gpio(struct device *dev, - const char *con_id, - enum of_gpio_flags *of_flags) -{ - /* - * Currently this USB quirk is only for the Fairchild FUSB302 host which is using - * an undocumented DT GPIO line named "fcs,int_n" without the compulsory "-gpios" - * suffix. - */ - if (!IS_ENABLED(CONFIG_TYPEC_FUSB302)) + if (!con_id || strcmp(con_id, "trigger-sources")) return ERR_PTR(-ENOENT); - if (!con_id || strcmp(con_id, "fcs,int_n")) - return ERR_PTR(-ENOENT); + desc = of_get_named_gpiod_flags(np, con_id, idx, of_flags); + if (!gpiod_not_found(desc)) + pr_debug("%s is used as a trigger\n", of_node_full_name(np)); - return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags); + return desc; } -struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, + +typedef struct gpio_desc *(*of_find_gpio_quirk)(struct device_node *np, + const char *con_id, + unsigned int idx, + enum of_gpio_flags *of_flags); +static const of_find_gpio_quirk of_find_gpio_quirks[] = { + of_find_gpio_rename, + of_find_mt2701_gpio, + of_find_trigger_gpio, + NULL +}; + +struct gpio_desc *of_find_gpio(struct device_node *np, const char *con_id, unsigned int idx, unsigned long *flags) { - char prop_name[32]; /* 32 is max size of property name */ - enum of_gpio_flags of_flags; + char propname[32]; /* 32 is max size of property name */ + enum of_gpio_flags of_flags = 0; + const of_find_gpio_quirk *q; struct gpio_desc *desc; - unsigned int i; /* Try GPIO property "foo-gpios" and "foo-gpio" */ - for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) { - if (con_id) - snprintf(prop_name, sizeof(prop_name), "%s-%s", con_id, - gpio_suffixes[i]); - else - snprintf(prop_name, sizeof(prop_name), "%s", - gpio_suffixes[i]); - - desc = of_get_named_gpiod_flags(dev->of_node, prop_name, idx, - &of_flags); - + for_each_gpio_property_name(propname, con_id) { + desc = of_get_named_gpiod_flags(np, propname, idx, &of_flags); if (!gpiod_not_found(desc)) break; } - if (gpiod_not_found(desc)) { - /* Special handling for SPI GPIOs if used */ - desc = of_find_spi_gpio(dev, con_id, &of_flags); - } - - if (gpiod_not_found(desc)) { - /* This quirk looks up flags and all */ - desc = of_find_spi_cs_gpio(dev, con_id, idx, flags); - if (!IS_ERR(desc)) - return desc; - } - - if (gpiod_not_found(desc)) { - /* Special handling for regulator GPIOs if used */ - desc = of_find_regulator_gpio(dev, con_id, &of_flags); - } - - if (gpiod_not_found(desc)) - desc = of_find_arizona_gpio(dev, con_id, &of_flags); - - if (gpiod_not_found(desc)) - desc = of_find_usb_gpio(dev, con_id, &of_flags); + /* Properly named GPIO was not found, try workarounds */ + for (q = of_find_gpio_quirks; gpiod_not_found(desc) && *q; q++) + desc = (*q)(np, con_id, idx, &of_flags); if (IS_ERR(desc)) return desc; - if (of_flags & OF_GPIO_ACTIVE_LOW) - *flags |= GPIO_ACTIVE_LOW; - - if (of_flags & OF_GPIO_SINGLE_ENDED) { - if (of_flags & OF_GPIO_OPEN_DRAIN) - *flags |= GPIO_OPEN_DRAIN; - else - *flags |= GPIO_OPEN_SOURCE; - } - - if (of_flags & OF_GPIO_TRANSITORY) - *flags |= GPIO_TRANSITORY; - - if (of_flags & OF_GPIO_PULL_UP) - *flags |= GPIO_PULL_UP; - if (of_flags & OF_GPIO_PULL_DOWN) - *flags |= GPIO_PULL_DOWN; + *flags = of_convert_gpio_flags(of_flags); return desc; } @@ -570,7 +741,8 @@ struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id, * of_find_gpio() or of_parse_own_gpio() * @dflags: gpiod_flags - optional GPIO initialization flags * - * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno + * Returns: + * GPIO descriptor to use with Linux GPIO API, or one of the errno * value on the error condition. */ static struct gpio_desc *of_parse_own_gpio(struct device_node *np, @@ -587,7 +759,7 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np, u32 tmp; int ret; - chip_np = chip->of_node; + chip_np = dev_of_node(&chip->gpiodev->dev); if (!chip_np) return ERR_PTR(-EINVAL); @@ -613,14 +785,7 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np, if (IS_ERR(desc)) return desc; - if (xlate_flags & OF_GPIO_ACTIVE_LOW) - *lflags |= GPIO_ACTIVE_LOW; - if (xlate_flags & OF_GPIO_TRANSITORY) - *lflags |= GPIO_TRANSITORY; - if (xlate_flags & OF_GPIO_PULL_UP) - *lflags |= GPIO_PULL_UP; - if (xlate_flags & OF_GPIO_PULL_DOWN) - *lflags |= GPIO_PULL_DOWN; + *lflags = of_convert_gpio_flags(xlate_flags); if (of_property_read_bool(np, "input")) *dflags |= GPIOD_IN; @@ -645,7 +810,8 @@ static struct gpio_desc *of_parse_own_gpio(struct device_node *np, * @chip: gpio chip to act on * @hog: device node describing the hogs * - * Returns error if it fails otherwise 0 on success. + * Returns: + * 0 on success, or negative errno on failure. */ static int of_gpiochip_add_hog(struct gpio_chip *chip, struct device_node *hog) { @@ -666,7 +832,7 @@ static int of_gpiochip_add_hog(struct gpio_chip *chip, struct device_node *hog) return ret; #ifdef CONFIG_OF_DYNAMIC - desc->hog = hog; + WRITE_ONCE(desc->hog, hog); #endif } @@ -679,22 +845,21 @@ static int of_gpiochip_add_hog(struct gpio_chip *chip, struct device_node *hog) * * This is only used by of_gpiochip_add to request/set GPIO initial * configuration. - * It returns error if it fails otherwise 0 on success. + * + * Returns: + * 0 on success, or negative errno on failure. */ static int of_gpiochip_scan_gpios(struct gpio_chip *chip) { - struct device_node *np; int ret; - for_each_available_child_of_node(chip->of_node, np) { + for_each_available_child_of_node_scoped(dev_of_node(&chip->gpiodev->dev), np) { if (!of_property_read_bool(np, "gpio-hog")) continue; ret = of_gpiochip_add_hog(chip, np); - if (ret < 0) { - of_node_put(np); + if (ret < 0) return ret; - } of_node_set_flag(np, OF_POPULATED); } @@ -711,31 +876,28 @@ static int of_gpiochip_scan_gpios(struct gpio_chip *chip) static void of_gpiochip_remove_hog(struct gpio_chip *chip, struct device_node *hog) { - struct gpio_desc *descs = chip->gpiodev->descs; - unsigned int i; + struct gpio_desc *desc; - for (i = 0; i < chip->ngpio; i++) { - if (test_bit(FLAG_IS_HOGGED, &descs[i].flags) && - descs[i].hog == hog) - gpiochip_free_own_desc(&descs[i]); - } + for_each_gpio_desc_with_flag(chip, desc, GPIOD_FLAG_IS_HOGGED) + if (READ_ONCE(desc->hog) == hog) + gpiochip_free_own_desc(desc); } -static int of_gpiochip_match_node(struct gpio_chip *chip, void *data) +static int of_gpiochip_match_node(struct gpio_chip *chip, const void *data) { - return chip->gpiodev->dev.of_node == data; + return device_match_of_node(&chip->gpiodev->dev, data); } -static struct gpio_chip *of_find_gpiochip_by_node(struct device_node *np) +static struct gpio_device *of_find_gpio_device_by_node(struct device_node *np) { - return gpiochip_find(np, of_gpiochip_match_node); + return gpio_device_find(np, of_gpiochip_match_node); } static int of_gpio_notify(struct notifier_block *nb, unsigned long action, void *arg) { + struct gpio_device *gdev __free(gpio_device_put) = NULL; struct of_reconfig_data *rd = arg; - struct gpio_chip *chip; int ret; /* @@ -747,38 +909,38 @@ static int of_gpio_notify(struct notifier_block *nb, unsigned long action, switch (of_reconfig_get_state_change(action, arg)) { case OF_RECONFIG_CHANGE_ADD: if (!of_property_read_bool(rd->dn, "gpio-hog")) - return NOTIFY_OK; /* not for us */ + return NOTIFY_DONE; /* not for us */ if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) - return NOTIFY_OK; + return NOTIFY_DONE; - chip = of_find_gpiochip_by_node(rd->dn->parent); - if (chip == NULL) - return NOTIFY_OK; /* not for us */ + gdev = of_find_gpio_device_by_node(rd->dn->parent); + if (!gdev) + return NOTIFY_DONE; /* not for us */ - ret = of_gpiochip_add_hog(chip, rd->dn); + ret = of_gpiochip_add_hog(gpio_device_get_chip(gdev), rd->dn); if (ret < 0) { pr_err("%s: failed to add hogs for %pOF\n", __func__, rd->dn); of_node_clear_flag(rd->dn, OF_POPULATED); return notifier_from_errno(ret); } - break; + return NOTIFY_OK; case OF_RECONFIG_CHANGE_REMOVE: if (!of_node_check_flag(rd->dn, OF_POPULATED)) - return NOTIFY_OK; /* already depopulated */ + return NOTIFY_DONE; /* already depopulated */ - chip = of_find_gpiochip_by_node(rd->dn->parent); - if (chip == NULL) - return NOTIFY_OK; /* not for us */ + gdev = of_find_gpio_device_by_node(rd->dn->parent); + if (!gdev) + return NOTIFY_DONE; /* not for us */ - of_gpiochip_remove_hog(chip, rd->dn); + of_gpiochip_remove_hog(gpio_device_get_chip(gdev), rd->dn); of_node_clear_flag(rd->dn, OF_POPULATED); - break; + return NOTIFY_OK; } - return NOTIFY_OK; + return NOTIFY_DONE; } struct notifier_block gpio_of_notifier = { @@ -787,7 +949,7 @@ struct notifier_block gpio_of_notifier = { #endif /* CONFIG_OF_DYNAMIC */ /** - * of_gpio_simple_xlate - translate gpiospec to the GPIO number and flags + * of_gpio_twocell_xlate - translate twocell gpiospec to the GPIO number and flags * @gc: pointer to the gpio_chip structure * @gpiospec: GPIO specifier as found in the device tree * @flags: a flags pointer to fill in @@ -795,10 +957,13 @@ struct notifier_block gpio_of_notifier = { * This is simple translation function, suitable for the most 1:1 mapped * GPIO chips. This function performs only one sanity check: whether GPIO * is less than ngpios (that is specified in the gpio_chip). + * + * Returns: + * GPIO number (>= 0) on success, negative errno on failure. */ -static int of_gpio_simple_xlate(struct gpio_chip *gc, - const struct of_phandle_args *gpiospec, - u32 *flags) +static int of_gpio_twocell_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) { /* * We're discouraging gpio_cells < 2, since that way you'll have to @@ -806,7 +971,7 @@ static int of_gpio_simple_xlate(struct gpio_chip *gc, * number and the flags from a single gpio cell -- this is possible, * but not recommended). */ - if (gc->of_gpio_n_cells < 2) { + if (gc->of_gpio_n_cells != 2) { WARN_ON(1); return -EINVAL; } @@ -824,119 +989,78 @@ static int of_gpio_simple_xlate(struct gpio_chip *gc, } /** - * of_mm_gpiochip_add_data - Add memory mapped GPIO chip (bank) - * @np: device node of the GPIO chip - * @mm_gc: pointer to the of_mm_gpio_chip allocated structure - * @data: driver data to store in the struct gpio_chip - * - * To use this function you should allocate and fill mm_gc with: + * of_gpio_threecell_xlate - translate threecell gpiospec to the GPIO number and flags + * @gc: pointer to the gpio_chip structure + * @gpiospec: GPIO specifier as found in the device tree + * @flags: a flags pointer to fill in * - * 1) In the gpio_chip structure: - * - all the callbacks - * - of_gpio_n_cells - * - of_xlate callback (optional) + * This is simple translation function, suitable for the most 1:n mapped + * GPIO chips, i.e. several GPIO chip instances from one device tree node. + * In this case the following binding is implied: * - * 3) In the of_mm_gpio_chip structure: - * - save_regs callback (optional) + * foo-gpios = <&gpio instance offset flags>; * - * If succeeded, this function will map bank's memory and will - * do all necessary work for you. Then you'll able to use .regs - * to manage GPIOs from the callbacks. + * Returns: + * GPIO number (>= 0) on success, negative errno on failure. */ -int of_mm_gpiochip_add_data(struct device_node *np, - struct of_mm_gpio_chip *mm_gc, - void *data) +static int of_gpio_threecell_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) { - int ret = -ENOMEM; - struct gpio_chip *gc = &mm_gc->gc; - - gc->label = kasprintf(GFP_KERNEL, "%pOF", np); - if (!gc->label) - goto err0; - - mm_gc->regs = of_iomap(np, 0); - if (!mm_gc->regs) - goto err1; - - gc->base = -1; - - if (mm_gc->save_regs) - mm_gc->save_regs(mm_gc); - - mm_gc->gc.of_node = np; + if (gc->of_gpio_n_cells != 3) { + WARN_ON(1); + return -EINVAL; + } - ret = gpiochip_add_data(gc, data); - if (ret) - goto err2; + if (WARN_ON(gpiospec->args_count != 3)) + return -EINVAL; - return 0; -err2: - iounmap(mm_gc->regs); -err1: - kfree(gc->label); -err0: - pr_err("%pOF: GPIO chip registration failed with status %d\n", np, ret); - return ret; -} -EXPORT_SYMBOL_GPL(of_mm_gpiochip_add_data); + /* + * Check chip instance number, the driver responds with true if + * this is the chip we are looking for. + */ + if (!gc->of_node_instance_match(gc, gpiospec->args[0])) + return -EINVAL; -/** - * of_mm_gpiochip_remove - Remove memory mapped GPIO chip (bank) - * @mm_gc: pointer to the of_mm_gpio_chip allocated structure - */ -void of_mm_gpiochip_remove(struct of_mm_gpio_chip *mm_gc) -{ - struct gpio_chip *gc = &mm_gc->gc; + if (gpiospec->args[1] >= gc->ngpio) + return -EINVAL; - if (!mm_gc) - return; + if (flags) + *flags = gpiospec->args[2]; - gpiochip_remove(gc); - iounmap(mm_gc->regs); - kfree(gc->label); + return gpiospec->args[1]; } -EXPORT_SYMBOL_GPL(of_mm_gpiochip_remove); - -static void of_gpiochip_init_valid_mask(struct gpio_chip *chip) -{ - int len, i; - u32 start, count; - struct device_node *np = chip->of_node; - - len = of_property_count_u32_elems(np, "gpio-reserved-ranges"); - if (len < 0 || len % 2 != 0) - return; - - for (i = 0; i < len; i += 2) { - of_property_read_u32_index(np, "gpio-reserved-ranges", - i, &start); - of_property_read_u32_index(np, "gpio-reserved-ranges", - i + 1, &count); - if (start >= chip->ngpio || start + count >= chip->ngpio) - continue; - - bitmap_clear(chip->valid_mask, start, count); - } -}; #ifdef CONFIG_PINCTRL static int of_gpiochip_add_pin_range(struct gpio_chip *chip) { - struct device_node *np = chip->of_node; struct of_phandle_args pinspec; struct pinctrl_dev *pctldev; - int index = 0, ret; + struct device_node *np; + int index = 0, ret, trim; const char *name; static const char group_names_propname[] = "gpio-ranges-group-names"; - struct property *group_names; + bool has_group_names; + int offset; /* Offset of the first GPIO line on the chip */ + int pin; /* Pin base number in the range */ + int count; /* Number of pins/GPIO lines to map */ + np = dev_of_node(&chip->gpiodev->dev); if (!np) return 0; - group_names = of_find_property(np, group_names_propname, NULL); + has_group_names = of_property_present(np, group_names_propname); for (;; index++) { - ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3, + /* + * Ordinary phandles contain 2-3 cells: + * gpios = <&gpio [instance] offset flags>; + * Ranges always contain one more cell: + * gpio-ranges <&pinctrl [gpio_instance] gpio_offet pin_offet count>; + * This is why we parse chip->of_gpio_n_cells + 1 cells + */ + ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", + chip->of_gpio_n_cells + 1, index, &pinspec); if (ret) break; @@ -946,8 +1070,35 @@ static int of_gpiochip_add_pin_range(struct gpio_chip *chip) if (!pctldev) return -EPROBE_DEFER; - if (pinspec.args[2]) { - if (group_names) { + if (chip->of_gpio_n_cells == 3) { + /* First cell is the gpiochip instance number */ + offset = pinspec.args[1]; + pin = pinspec.args[2]; + count = pinspec.args[3]; + } else { + offset = pinspec.args[0]; + pin = pinspec.args[1]; + count = pinspec.args[2]; + } + + /* + * With multiple GPIO chips per node, check that this chip is the + * right instance. + */ + if (chip->of_node_instance_match && + (chip->of_gpio_n_cells == 3) && + !chip->of_node_instance_match(chip, pinspec.args[0])) + continue; + + /* Ignore ranges outside of this GPIO chip */ + if (offset >= (chip->offset + chip->ngpio)) + continue; + if (offset + count <= chip->offset) + continue; + + if (count) { + /* npins != 0: linear range */ + if (has_group_names) { of_property_read_string_index(np, group_names_propname, index, &name); @@ -957,23 +1108,35 @@ static int of_gpiochip_add_pin_range(struct gpio_chip *chip) break; } } - /* npins != 0: linear range */ + + /* Trim the range to fit this GPIO chip */ + if (chip->offset > offset) { + trim = chip->offset - offset; + count -= trim; + pin += trim; + offset = 0; + } else { + offset -= chip->offset; + } + if ((offset + count) > chip->ngpio) + count = chip->ngpio - offset; + ret = gpiochip_add_pin_range(chip, pinctrl_dev_get_devname(pctldev), - pinspec.args[0], - pinspec.args[1], - pinspec.args[2]); + offset, + pin, + count); if (ret) return ret; } else { /* npins == 0: special range */ - if (pinspec.args[1]) { + if (pin) { pr_err("%pOF: Illegal gpio-range format.\n", np); break; } - if (!group_names) { + if (!has_group_names) { pr_err("%pOF: GPIO group range requested but no %s property.\n", np, group_names_propname); break; @@ -992,7 +1155,7 @@ static int of_gpiochip_add_pin_range(struct gpio_chip *chip) } ret = gpiochip_add_pingroup_range(chip, pctldev, - pinspec.args[0], name); + offset, name); if (ret) return ret; } @@ -1007,48 +1170,49 @@ static int of_gpiochip_add_pin_range(struct gpio_chip *chip) { return 0; } int of_gpiochip_add(struct gpio_chip *chip) { + struct device_node *np; int ret; - if (!chip->of_node) + np = dev_of_node(&chip->gpiodev->dev); + if (!np) return 0; if (!chip->of_xlate) { - chip->of_gpio_n_cells = 2; - chip->of_xlate = of_gpio_simple_xlate; + if (chip->of_gpio_n_cells == 3) { + if (!chip->of_node_instance_match) + return -EINVAL; + chip->of_xlate = of_gpio_threecell_xlate; + } else { + chip->of_gpio_n_cells = 2; + chip->of_xlate = of_gpio_twocell_xlate; + } } if (chip->of_gpio_n_cells > MAX_PHANDLE_ARGS) return -EINVAL; - of_gpiochip_init_valid_mask(chip); - ret = of_gpiochip_add_pin_range(chip); if (ret) return ret; - of_node_get(chip->of_node); + of_node_get(np); ret = of_gpiochip_scan_gpios(chip); if (ret) - of_node_put(chip->of_node); + of_node_put(np); return ret; } void of_gpiochip_remove(struct gpio_chip *chip) { - of_node_put(chip->of_node); + of_node_put(dev_of_node(&chip->gpiodev->dev)); } -void of_gpio_dev_init(struct gpio_chip *gc, struct gpio_device *gdev) +bool of_gpiochip_instance_match(struct gpio_chip *gc, unsigned int index) { - /* Set default OF node to parent's one if present */ - if (gc->parent) - gdev->dev.of_node = gc->parent->of_node; + if (gc->of_node_instance_match) + return gc->of_node_instance_match(gc, index); - /* If the gpiochip has an assigned OF node this takes precedence */ - if (gc->of_node) - gdev->dev.of_node = gc->of_node; - else - gc->of_node = gdev->dev.of_node; + return false; } |