diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 1650 |
1 files changed, 1589 insertions, 61 deletions
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h index b800a507d1e0..3f2a0ed02c59 100644 --- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h +++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h @@ -36,6 +36,9 @@ //<DMUB_TYPES>================================================================== /* Basic type definitions. */ +#ifdef __forceinline +#undef __forceinline +#endif #define __forceinline inline /** @@ -101,6 +104,14 @@ */ #define DMUB_MAX_FPO_STREAMS 4 +/* Define to ensure that the "common" members always appear in the same + * order in different structs for back compat purposes + */ +#define COMMON_STREAM_STATIC_SUB_STATE \ + struct dmub_fams2_cmd_legacy_stream_static_state legacy; \ + struct dmub_fams2_cmd_subvp_stream_static_state subvp; \ + struct dmub_fams2_cmd_drr_stream_static_state drr; + /* Maximum number of streams on any ASIC. */ #define DMUB_MAX_STREAMS 6 @@ -161,6 +172,13 @@ #endif /** + * OS/FW agnostic memcmp + */ +#ifndef dmub_memcmp +#define dmub_memcmp(lhs, rhs, bytes) memcmp((lhs), (rhs), (bytes)) +#endif + +/** * OS/FW agnostic udelay */ #ifndef dmub_udelay @@ -281,6 +299,31 @@ union dmub_addr { } u; /*<< Low/high bit access */ uint64_t quad_part; /*<< 64 bit address */ }; + +/* Flattened structure containing SOC BB parameters stored in the VBIOS + * It is not practical to store the entire bounding box in VBIOS since the bounding box struct can gain new parameters. + * This also prevents alighment issues when new parameters are added to the SoC BB. + * The following parameters should be added since these values can't be obtained elsewhere: + * -dml2_soc_power_management_parameters + * -dml2_soc_vmin_clock_limits + */ +struct dmub_soc_bb_params { + uint32_t dram_clk_change_blackout_ns; + uint32_t dram_clk_change_read_only_ns; + uint32_t dram_clk_change_write_only_ns; + uint32_t fclk_change_blackout_ns; + uint32_t g7_ppt_blackout_ns; + uint32_t stutter_enter_plus_exit_latency_ns; + uint32_t stutter_exit_latency_ns; + uint32_t z8_stutter_enter_plus_exit_latency_ns; + uint32_t z8_stutter_exit_latency_ns; + uint32_t z8_min_idle_time_ns; + uint32_t type_b_dram_clk_change_blackout_ns; + uint32_t type_b_ppt_blackout_ns; + uint32_t vmin_limit_dispclk_khz; + uint32_t vmin_limit_dcfclk_khz; + uint32_t g7_temperature_read_blackout_ns; +}; #pragma pack(pop) /** @@ -431,7 +474,80 @@ union replay_debug_flags { */ uint32_t enable_ips_residency_profiling : 1; - uint32_t reserved : 20; + /** + * 0x1000 (bit 12) + * @enable_coasting_vtotal_check: Enable Coasting_vtotal_check + */ + uint32_t enable_coasting_vtotal_check : 1; + /** + * 0x2000 (bit 13) + * @enable_visual_confirm_debug: Enable Visual Confirm Debug + */ + uint32_t enable_visual_confirm_debug : 1; + + /** + * 0x4000 (bit 14) + * @debug_log_enabled: Debug Log Enabled + */ + uint32_t debug_log_enabled : 1; + + /** + * 0x8000 (bit 15) + * @enable_sub_feature_visual_confirm: Enable Sub Feature Visual Confirm + */ + uint32_t enable_sub_feature_visual_confirm : 1; + + uint32_t reserved : 16; + } bitfields; + + uint32_t u32All; +}; + +/** + * Flags record error state. + */ +union replay_visual_confirm_error_state_flags { + struct { + /** + * 0x1 (bit 0) - Desync Error flag. + */ + uint32_t desync_error : 1; + + /** + * 0x2 (bit 1) - State Transition Error flag. + */ + uint32_t state_transition_error : 1; + + /** + * 0x4 (bit 2) - Crc Error flag + */ + uint32_t crc_error : 1; + + /** + * 0x8 (bit 3) - Reserved + */ + uint32_t reserved_3 : 1; + + /** + * 0x10 (bit 4) - Incorrect Coasting vtotal checking --> use debug flag to control DPCD write. + * Added new debug flag to control DPCD. + */ + uint32_t incorrect_vtotal_in_static_screen : 1; + + /** + * 0x20 (bit 5) - No doubled Refresh Rate. + */ + uint32_t no_double_rr : 1; + + /** + * Reserved bit 6-7 + */ + uint32_t reserved_6_7 : 2; + + /** + * Reserved bit 9-31 + */ + uint32_t reserved_9_31 : 24; } bitfields; uint32_t u32All; @@ -475,12 +591,127 @@ union replay_hw_flags { * Use TPS3 signal when restore main link. */ uint32_t force_wakeup_by_tps3 : 1; + /** + * @is_alpm_initialized: Indicates whether ALPM is initialized + */ + uint32_t is_alpm_initialized : 1; + + /** + * @alpm_mode: Indicates ALPM mode selected + */ + uint32_t alpm_mode : 2; } bitfields; uint32_t u32All; }; /** + * Flags that can be set by driver to change some Panel Replay behaviour. + */ +union pr_debug_flags { + struct { + /** + * 0x1 (bit 0) + * Enable visual confirm in FW. + */ + uint32_t visual_confirm : 1; + + /** + * 0x2 (bit 1) + * @skip_crc: Set if need to skip CRC. + */ + uint32_t skip_crc : 1; + + /** + * 0x4 (bit 2) + * @force_link_power_on: Force disable ALPM control + */ + uint32_t force_link_power_on : 1; + + /** + * 0x8 (bit 3) + * @force_phy_power_on: Force phy power on + */ + uint32_t force_phy_power_on : 1; + + /** + * 0x10 (bit 4) + * @skip_crtc_disabled: CRTC disable skipped + */ + uint32_t skip_crtc_disabled : 1; + + /* + * 0x20 (bit 5) + * @visual_confirm_rate_control: Enable Visual Confirm rate control detection + */ + uint32_t visual_confirm_rate_control : 1; + + uint32_t reserved : 26; + } bitfields; + + uint32_t u32All; +}; + +union pr_hw_flags { + struct { + /** + * @allow_alpm_fw_standby_mode: To indicate whether the + * ALPM FW standby mode is allowed + */ + uint32_t allow_alpm_fw_standby_mode : 1; + + /* + * @dsc_enable_status: DSC enable status in driver + */ + uint32_t dsc_enable_status : 1; + + /** + * @fec_enable_status: receive fec enable/disable status from driver + */ + uint32_t fec_enable_status : 1; + + /* + * @smu_optimizations_en: SMU power optimization. + * Only when active display is Replay capable and display enters Replay. + * Trigger interrupt to SMU to powerup/down. + */ + uint32_t smu_optimizations_en : 1; + + /** + * @phy_power_state: Indicates current phy power state + */ + uint32_t phy_power_state : 1; + + /** + * @link_power_state: Indicates current link power state + */ + uint32_t link_power_state : 1; + /** + * Use TPS3 signal when restore main link. + */ + uint32_t force_wakeup_by_tps3 : 1; + /** + * @is_alpm_initialized: Indicates whether ALPM is initialized + */ + uint32_t is_alpm_initialized : 1; + /** + * @alpm_mode: Indicates ALPM mode selected + */ + uint32_t alpm_mode : 2; + } bitfields; + + uint32_t u32All; +}; + +union fw_assisted_mclk_switch_version { + struct { + uint8_t minor : 5; + uint8_t major : 3; + }; + uint8_t ver; +}; + +/** * DMUB feature capabilities. * After DMUB init, driver will query FW capabilities prior to enabling certain features. */ @@ -496,6 +727,7 @@ struct dmub_feature_caps { uint8_t replay_supported; uint8_t replay_reserved[3]; uint8_t abm_aux_backlight_support; + uint8_t lsdma_support_in_dmu; }; struct dmub_visual_confirm_color { @@ -508,6 +740,112 @@ struct dmub_visual_confirm_color { uint16_t panel_inst; }; +/** + * struct dmub_cursor_offload_pipe_data_dcn30_v1 - DCN30+ per pipe data. + */ +struct dmub_cursor_offload_pipe_data_dcn30_v1 { + uint32_t CURSOR0_0_CURSOR_SURFACE_ADDRESS; + uint32_t CURSOR0_0_CURSOR_SURFACE_ADDRESS_HIGH; + uint32_t CURSOR0_0_CURSOR_SIZE__CURSOR_WIDTH : 16; + uint32_t CURSOR0_0_CURSOR_SIZE__CURSOR_HEIGHT : 16; + uint32_t CURSOR0_0_CURSOR_POSITION__CURSOR_X_POSITION : 16; + uint32_t CURSOR0_0_CURSOR_POSITION__CURSOR_Y_POSITION : 16; + uint32_t CURSOR0_0_CURSOR_HOT_SPOT__CURSOR_HOT_SPOT_X : 16; + uint32_t CURSOR0_0_CURSOR_HOT_SPOT__CURSOR_HOT_SPOT_Y : 16; + uint32_t CURSOR0_0_CURSOR_DST_OFFSET__CURSOR_DST_X_OFFSET : 13; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_ENABLE : 1; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_MODE : 3; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_2X_MAGNIFY : 1; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_PITCH : 2; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_LINES_PER_CHUNK : 5; + uint32_t reserved0[4]; + uint32_t CNVC_CUR0_CURSOR0_CONTROL__CUR0_ENABLE : 1; + uint32_t CNVC_CUR0_CURSOR0_CONTROL__CUR0_MODE : 3; + uint32_t CNVC_CUR0_CURSOR0_CONTROL__CUR0_EXPANSION_MODE : 1; + uint32_t CNVC_CUR0_CURSOR0_CONTROL__CUR0_ROM_EN : 1; + uint32_t CNVC_CUR0_CURSOR0_COLOR0__CUR0_COLOR0 : 24; + uint32_t CNVC_CUR0_CURSOR0_COLOR1__CUR0_COLOR1 : 24; + uint32_t CNVC_CUR0_CURSOR0_FP_SCALE_BIAS__CUR0_FP_BIAS : 16; + uint32_t CNVC_CUR0_CURSOR0_FP_SCALE_BIAS__CUR0_FP_SCALE, : 16; + uint32_t reserved1[5]; + uint32_t HUBPREQ0_CURSOR_SETTINGS__CURSOR0_DST_Y_OFFSET : 8; + uint32_t HUBPREQ0_CURSOR_SETTINGS__CURSOR0_CHUNK_HDL_ADJUST : 8; + uint32_t reserved2[3]; +}; + +/** + * struct dmub_cursor_offload_pipe_data_dcn401_v1 - DCN401 per pipe data. + */ +struct dmub_cursor_offload_pipe_data_dcn401_v1 { + uint32_t CURSOR0_0_CURSOR_SURFACE_ADDRESS; + uint32_t CURSOR0_0_CURSOR_SURFACE_ADDRESS_HIGH; + uint32_t CURSOR0_0_CURSOR_SIZE__CURSOR_WIDTH : 16; + uint32_t CURSOR0_0_CURSOR_SIZE__CURSOR_HEIGHT : 16; + uint32_t CURSOR0_0_CURSOR_POSITION__CURSOR_X_POSITION : 16; + uint32_t CURSOR0_0_CURSOR_POSITION__CURSOR_Y_POSITION : 16; + uint32_t CURSOR0_0_CURSOR_HOT_SPOT__CURSOR_HOT_SPOT_X : 16; + uint32_t CURSOR0_0_CURSOR_HOT_SPOT__CURSOR_HOT_SPOT_Y : 16; + uint32_t CURSOR0_0_CURSOR_DST_OFFSET__CURSOR_DST_X_OFFSET : 13; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_ENABLE : 1; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_MODE : 3; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_2X_MAGNIFY : 1; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_PITCH : 2; + uint32_t CURSOR0_0_CURSOR_CONTROL__CURSOR_LINES_PER_CHUNK : 5; + uint32_t reserved0[4]; + uint32_t CM_CUR0_CURSOR0_CONTROL__CUR0_ENABLE : 1; + uint32_t CM_CUR0_CURSOR0_CONTROL__CUR0_MODE : 3; + uint32_t CM_CUR0_CURSOR0_CONTROL__CUR0_EXPANSION_MODE : 1; + uint32_t CM_CUR0_CURSOR0_CONTROL__CUR0_ROM_EN : 1; + uint32_t CM_CUR0_CURSOR0_COLOR0__CUR0_COLOR0 : 24; + uint32_t CM_CUR0_CURSOR0_COLOR1__CUR0_COLOR1 : 24; + uint32_t CM_CUR0_CURSOR0_FP_SCALE_BIAS_G_Y__CUR0_FP_BIAS_G_Y : 16; + uint32_t CM_CUR0_CURSOR0_FP_SCALE_BIAS_G_Y__CUR0_FP_SCALE_G_Y, : 16; + uint32_t CM_CUR0_CURSOR0_FP_SCALE_BIAS_RB_CRCB__CUR0_FP_BIAS_RB_CRCB : 16; + uint32_t CM_CUR0_CURSOR0_FP_SCALE_BIAS_RB_CRCB__CUR0_FP_SCALE_RB_CRCB : 16; + uint32_t reserved1[4]; + uint32_t HUBPREQ0_CURSOR_SETTINGS__CURSOR0_DST_Y_OFFSET : 8; + uint32_t HUBPREQ0_CURSOR_SETTINGS__CURSOR0_CHUNK_HDL_ADJUST : 8; + uint32_t HUBP0_DCHUBP_MALL_CONFIG__USE_MALL_FOR_CURSOR : 1; + uint32_t reserved2[3]; +}; + +/** + * struct dmub_cursor_offload_pipe_data_v1 - Per pipe data for cursor offload. + */ +struct dmub_cursor_offload_pipe_data_v1 { + union { + struct dmub_cursor_offload_pipe_data_dcn30_v1 dcn30; /**< DCN30 cursor data. */ + struct dmub_cursor_offload_pipe_data_dcn401_v1 dcn401; /**< DCN401 cursor data. */ + uint8_t payload[96]; /**< Guarantees the cursor pipe data size per-pipe. */ + }; +}; + +/** + * struct dmub_cursor_offload_payload_data_v1 - A payload of stream data. + */ +struct dmub_cursor_offload_payload_data_v1 { + uint32_t write_idx_start; /**< Write index, updated before pipe_data is written. */ + uint32_t write_idx_finish; /**< Write index, updated after pipe_data is written. */ + uint32_t pipe_mask; /**< Mask of pipes to update. */ + uint32_t reserved; /**< Reserved for future use. */ + struct dmub_cursor_offload_pipe_data_v1 pipe_data[6]; /**< Per-pipe cursor data. */ +}; + +/** + * struct dmub_cursor_offload_stream_v1 - Per-stream data for cursor offload. + */ +struct dmub_cursor_offload_stream_v1 { + struct dmub_cursor_offload_payload_data_v1 payloads[4]; /**< A small buffer of cursor payloads. */ + uint32_t write_idx; /**< The index of the last written payload. */ +}; + +/** + * struct dmub_cursor_offload_v1 - Cursor offload feature state. + */ +struct dmub_cursor_offload_v1 { + struct dmub_cursor_offload_stream_v1 offload_streams[6]; /**< Per-stream cursor offload data */ +}; + //============================================================================== //</DMUB_TYPES>================================================================= //============================================================================== @@ -527,7 +865,8 @@ struct dmub_visual_confirm_color { union dmub_fw_meta_feature_bits { struct { uint32_t shared_state_link_detection : 1; /**< 1 supports link detection via shared state */ - uint32_t reserved : 31; + uint32_t cursor_offload_v1_support: 1; /**< 1 supports cursor offload */ + uint32_t reserved : 30; } bits; /**< status bits */ uint32_t all; /**< 32-bit access to status bits */ }; @@ -659,6 +998,21 @@ enum dmub_ips_disable_type { DMUB_IPS_DISABLE_IPS2_Z10 = 4, DMUB_IPS_DISABLE_DYNAMIC = 5, DMUB_IPS_RCG_IN_ACTIVE_IPS2_IN_OFF = 6, + DMUB_IPS_DISABLE_Z8_RETENTION = 7, +}; + +enum dmub_ips_rcg_disable_type { + DMUB_IPS_RCG_ENABLE = 0, + DMUB_IPS0_RCG_DISABLE = 1, + DMUB_IPS1_RCG_DISABLE = 2, + DMUB_IPS_RCG_DISABLE = 3 +}; + +enum dmub_ips_in_vpb_disable_type { + DMUB_IPS_VPB_RCG_ONLY = 0, // Legacy behaviour + DMUB_IPS_VPB_DISABLE_ALL = 1, + DMUB_IPS_VPB_ENABLE_IPS1_AND_RCG = 2, + DMUB_IPS_VPB_ENABLE_ALL = 3 // Enable IPS1 Z8, IPS1 and RCG }; #define DMUB_IPS1_ALLOW_MASK 0x00000001 @@ -666,6 +1020,39 @@ enum dmub_ips_disable_type { #define DMUB_IPS1_COMMIT_MASK 0x00000004 #define DMUB_IPS2_COMMIT_MASK 0x00000008 +enum dmub_ips_comand_type { + /** + * Start/stop IPS residency measurements for a given IPS mode + */ + DMUB_CMD__IPS_RESIDENCY_CNTL = 0, + /** + * Query IPS residency information for a given IPS mode + */ + DMUB_CMD__IPS_QUERY_RESIDENCY_INFO = 1, +}; + +/** + * enum dmub_cursor_offload_comand_type - Cursor offload subcommands. + */ +enum dmub_cursor_offload_comand_type { + /** + * Initializes the cursor offload feature. + */ + DMUB_CMD__CURSOR_OFFLOAD_INIT = 0, + /** + * Enables cursor offloading for a stream and updates the timing parameters. + */ + DMUB_CMD__CURSOR_OFFLOAD_STREAM_ENABLE = 1, + /** + * Disables cursor offloading for a given stream. + */ + DMUB_CMD__CURSOR_OFFLOAD_STREAM_DISABLE = 2, + /** + * Programs the latest data for a given stream. + */ + DMUB_CMD__CURSOR_OFFLOAD_STREAM_PROGRAM = 3, +}; + /** * union dmub_fw_boot_options - Boot option definitions for SCRATCH14 */ @@ -696,7 +1083,9 @@ union dmub_fw_boot_options { uint32_t ips_sequential_ono: 1; /**< 1 to enable sequential ONO IPS sequence */ uint32_t disable_sldo_opt: 1; /**< 1 to disable SLDO optimizations */ uint32_t lower_hbr3_phy_ssc: 1; /**< 1 to lower hbr3 phy ssc to 0.125 percent */ - uint32_t reserved : 6; /**< reserved */ + uint32_t override_hbr3_pll_vco: 1; /**< 1 to override the hbr3 pll vco to 0 */ + uint32_t disable_dpia_bw_allocation: 1; /**< 1 to disable the USB4 DPIA BW allocation */ + uint32_t reserved : 4; /**< reserved */ } bits; /**< boot bits */ uint32_t all; /**< 32-bit access to bits */ }; @@ -729,6 +1118,7 @@ enum dmub_shared_state_feature_id { DMUB_SHARED_SHARE_FEATURE__IPS_FW = 1, DMUB_SHARED_SHARE_FEATURE__IPS_DRIVER = 2, DMUB_SHARED_SHARE_FEATURE__DEBUG_SETUP = 3, + DMUB_SHARED_STATE_FEATURE__CURSOR_OFFLOAD_V1 = 4, DMUB_SHARED_STATE_FEATURE__LAST, /* Total number of features. */ }; @@ -737,11 +1127,12 @@ enum dmub_shared_state_feature_id { */ union dmub_shared_state_ips_fw_signals { struct { - uint32_t ips1_commit : 1; /**< 1 if in IPS1 */ + uint32_t ips1_commit : 1; /**< 1 if in IPS1 or IPS0 RCG */ uint32_t ips2_commit : 1; /**< 1 if in IPS2 */ uint32_t in_idle : 1; /**< 1 if DMCUB is in idle */ uint32_t detection_required : 1; /**< 1 if detection is required */ - uint32_t reserved_bits : 28; /**< Reversed */ + uint32_t ips1z8_commit: 1; /**< 1 if in IPS1 Z8 Retention */ + uint32_t reserved_bits : 27; /**< Reversed */ } bits; uint32_t all; }; @@ -756,7 +1147,12 @@ union dmub_shared_state_ips_driver_signals { uint32_t allow_ips2 : 1; /**< 1 is IPS1 is allowed */ uint32_t allow_z10 : 1; /**< 1 if Z10 is allowed */ uint32_t allow_idle: 1; /**< 1 if driver is allowing idle */ - uint32_t reserved_bits : 27; /**< Reversed bits */ + uint32_t allow_ips0_rcg : 1; /**< 1 is IPS0 RCG is allowed */ + uint32_t allow_ips1_rcg : 1; /**< 1 is IPS1 RCG is allowed */ + uint32_t allow_ips1z8 : 1; /**< 1 is IPS1 Z8 Retention is allowed */ + uint32_t allow_dynamic_ips1 : 1; /**< 1 if IPS1 is allowed in dynamic use cases such as VPB */ + uint32_t allow_dynamic_ips1_z8: 1; /**< 1 if IPS1 z8 ret is allowed in dynamic use cases such as VPB */ + uint32_t reserved_bits : 22; /**< Reversed bits */ } bits; uint32_t all; }; @@ -785,7 +1181,9 @@ struct dmub_shared_state_ips_fw { uint32_t ips1_exit_count; /**< Exit counter for IPS1 */ uint32_t ips2_entry_count; /**< Entry counter for IPS2 */ uint32_t ips2_exit_count; /**< Exit counter for IPS2 */ - uint32_t reserved[55]; /**< Reversed, to be updated when adding new fields. */ + uint32_t ips1_z8ret_entry_count; /**< Entry counter for IPS1 Z8 Retention */ + uint32_t ips1_z8ret_exit_count; /**< Exit counter for IPS1 Z8 Retention */ + uint32_t reserved[53]; /**< Reversed, to be updated when adding new fields. */ }; /* 248-bytes, fixed */ /** @@ -802,6 +1200,22 @@ struct dmub_shared_state_ips_driver { }; /* 248-bytes, fixed */ /** + * struct dmub_shared_state_cursor_offload_v1 - Header metadata for cursor offload. + */ +struct dmub_shared_state_cursor_offload_stream_v1 { + uint32_t last_write_idx; /**< Last write index */ + uint8_t reserved[28]; /**< Reserved bytes. */ +}; /* 32-bytes, fixed */ + +/** + * struct dmub_shared_state_cursor_offload_v1 - Header metadata for cursor offload. + */ +struct dmub_shared_state_cursor_offload_v1 { + struct dmub_shared_state_cursor_offload_stream_v1 offload_streams[6]; /**< stream state, 32-bytes each */ + uint8_t reserved[56]; /**< reserved for future use */ +}; /* 248-bytes, fixed */ + +/** * enum dmub_shared_state_feature_common - Generic payload. */ struct dmub_shared_state_feature_common { @@ -827,6 +1241,7 @@ struct dmub_shared_state_feature_block { struct dmub_shared_state_ips_fw ips_fw; /**< IPS firmware state */ struct dmub_shared_state_ips_driver ips_driver; /**< IPS driver state */ struct dmub_shared_state_debug_setup debug_setup; /**< Debug setup */ + struct dmub_shared_state_cursor_offload_v1 cursor_offload_v1; /**< Cursor offload */ } data; /**< Shared state data. */ }; /* 256-bytes, fixed */ @@ -1173,6 +1588,10 @@ enum dmub_gpint_command { * DESC: Setup debug configs. */ DMUB_GPINT__SETUP_DEBUG_MODE = 136, + /** + * DESC: Initiates IPS wake sequence. + */ + DMUB_GPINT__IPS_DEBUG_WAKE = 137, }; /** @@ -1252,6 +1671,16 @@ enum dmub_inbox0_command { #define DMUB_RB_SIZE (DMUB_RB_CMD_SIZE * DMUB_RB_MAX_ENTRY) /** + * Maximum number of items in the DMUB REG INBOX0 internal ringbuffer. + */ +#define DMUB_REG_INBOX0_RB_MAX_ENTRY 16 + +/** + * Ringbuffer size in bytes. + */ +#define DMUB_REG_INBOX0_RB_SIZE (DMUB_RB_CMD_SIZE * DMUB_REG_INBOX0_RB_MAX_ENTRY) + +/** * REG_SET mask for reg offload. */ #define REG_SET_MASK 0xFFFF @@ -1387,6 +1816,40 @@ enum dmub_cmd_type { */ DMUB_CMD__PSP = 88, + /** + * Command type used for all Fused IO commands. + */ + DMUB_CMD__FUSED_IO = 89, + + /** + * Command type used for all LSDMA commands. + */ + DMUB_CMD__LSDMA = 90, + + /** + * Command type use for all IPS commands. + */ + DMUB_CMD__IPS = 91, + + /** + * Command type use for Cursor offload. + */ + DMUB_CMD__CURSOR_OFFLOAD = 92, + + /** + * Command type used for all SMART_POWER_OLED commands. + */ + DMUB_CMD__SMART_POWER_OLED = 93, + + /** + * Command type use for all Panel Replay commands. + */ + DMUB_CMD__PR = 94, + + + /** + * Command type use for VBIOS shared commands. + */ DMUB_CMD__VBIOS = 128, }; @@ -1418,6 +1881,10 @@ enum dmub_out_cmd_type { * Command type used for HPD redetect notification */ DMUB_OUT_CMD__HPD_SENSE_NOTIFY = 6, + /** + * Command type used for Fused IO notification + */ + DMUB_OUT_CMD__FUSED_IO = 7, }; /* DMUB_CMD__DPIA command sub-types. */ @@ -1444,7 +1911,8 @@ struct dmub_cmd_header { unsigned int sub_type : 8; /**< command sub type */ unsigned int ret_status : 1; /**< 1 if returned data, 0 otherwise */ unsigned int multi_cmd_pending : 1; /**< 1 if multiple commands chained together */ - unsigned int reserved0 : 6; /**< reserved bits */ + unsigned int is_reg_based : 1; /**< 1 if register based mailbox cmd, 0 if FB based cmd */ + unsigned int reserved0 : 5; /**< reserved bits */ unsigned int payload_bytes : 6; /* payload excluding header - up to 60 bytes */ unsigned int reserved1 : 2; /**< reserved bits */ }; @@ -1792,6 +2260,154 @@ struct dmub_rb_cmd_fams2_flip { struct dmub_fams2_flip_info flip_info; }; +struct dmub_cmd_lsdma_data { + union { + struct lsdma_init_data { + union dmub_addr gpu_addr_base; + uint32_t ring_size; + } init_data; + struct lsdma_tiled_copy_data { + uint32_t src_addr_lo; + uint32_t src_addr_hi; + + uint32_t dst_addr_lo; + uint32_t dst_addr_hi; + + uint32_t src_x : 16; + uint32_t src_y : 16; + + uint32_t dst_x : 16; + uint32_t dst_y : 16; + + uint32_t src_width : 16; + uint32_t src_height : 16; + + uint32_t dst_width : 16; + uint32_t dst_height : 16; + + uint32_t rect_x : 16; + uint32_t rect_y : 16; + + uint32_t src_swizzle_mode : 5; + uint32_t src_mip_max : 5; + uint32_t src_mip_id : 5; + uint32_t dst_mip_max : 5; + uint32_t dst_swizzle_mode : 5; + uint32_t dst_mip_id : 5; + uint32_t tmz : 1; + uint32_t dcc : 1; + + uint32_t data_format : 6; + uint32_t padding1 : 4; + uint32_t dst_element_size : 3; + uint32_t num_type : 3; + uint32_t src_element_size : 3; + uint32_t write_compress : 2; + uint32_t cache_policy_dst : 2; + uint32_t cache_policy_src : 2; + uint32_t read_compress : 2; + uint32_t src_dim : 2; + uint32_t dst_dim : 2; + uint32_t max_uncom : 1; + + uint32_t max_com : 2; + uint32_t padding : 30; + } tiled_copy_data; + struct lsdma_linear_copy_data { + uint32_t src_lo; + uint32_t src_hi; + + uint32_t dst_lo; + uint32_t dst_hi; + + uint32_t count : 30; + uint32_t cache_policy_dst : 2; + + uint32_t tmz : 1; + uint32_t cache_policy_src : 2; + uint32_t padding : 29; + } linear_copy_data; + struct lsdma_linear_sub_window_copy_data { + uint32_t src_lo; + uint32_t src_hi; + + uint32_t dst_lo; + uint32_t dst_hi; + + uint32_t src_x : 16; + uint32_t src_y : 16; + + uint32_t dst_x : 16; + uint32_t dst_y : 16; + + uint32_t rect_x : 16; + uint32_t rect_y : 16; + + uint32_t src_pitch : 16; + uint32_t dst_pitch : 16; + + uint32_t src_slice_pitch; + uint32_t dst_slice_pitch; + + uint32_t tmz : 1; + uint32_t element_size : 3; + uint32_t src_cache_policy : 3; + uint32_t dst_cache_policy : 3; + uint32_t reserved0 : 22; + } linear_sub_window_copy_data; + struct lsdma_reg_write_data { + uint32_t reg_addr; + uint32_t reg_data; + } reg_write_data; + struct lsdma_pio_copy_data { + uint32_t src_lo; + uint32_t src_hi; + + uint32_t dst_lo; + uint32_t dst_hi; + + union { + struct { + uint32_t byte_count : 26; + uint32_t src_loc : 1; + uint32_t dst_loc : 1; + uint32_t src_addr_inc : 1; + uint32_t dst_addr_inc : 1; + uint32_t overlap_disable : 1; + uint32_t constant_fill : 1; + } fields; + uint32_t raw; + } packet; + } pio_copy_data; + struct lsdma_pio_constfill_data { + uint32_t dst_lo; + uint32_t dst_hi; + + union { + struct { + uint32_t byte_count : 26; + uint32_t src_loc : 1; + uint32_t dst_loc : 1; + uint32_t src_addr_inc : 1; + uint32_t dst_addr_inc : 1; + uint32_t overlap_disable : 1; + uint32_t constant_fill : 1; + } fields; + uint32_t raw; + } packet; + + uint32_t data; + } pio_constfill_data; + + uint32_t all[14]; + } u; +}; + +struct dmub_rb_cmd_lsdma { + struct dmub_cmd_header header; + struct dmub_cmd_lsdma_data lsdma_data; +}; + struct dmub_optc_state_v2 { uint32_t v_total_min; uint32_t v_total_max; @@ -1823,52 +2439,33 @@ enum fams2_stream_type { FAMS2_STREAM_TYPE_SUBVP = 4, }; -/* dynamic stream state */ -struct dmub_fams2_legacy_stream_dynamic_state { - uint8_t force_allow_at_vblank; - uint8_t pad[3]; -}; +struct dmub_rect16 { + /** + * Dirty rect x offset. + */ + uint16_t x; -struct dmub_fams2_subvp_stream_dynamic_state { - uint16_t viewport_start_hubp_vline; - uint16_t viewport_height_hubp_vlines; - uint16_t viewport_start_c_hubp_vline; - uint16_t viewport_height_c_hubp_vlines; - uint16_t phantom_viewport_height_hubp_vlines; - uint16_t phantom_viewport_height_c_hubp_vlines; - uint16_t microschedule_start_otg_vline; - uint16_t mall_start_otg_vline; - uint16_t mall_start_hubp_vline; - uint16_t mall_start_c_hubp_vline; - uint8_t force_allow_at_vblank_only; - uint8_t pad[3]; -}; + /** + * Dirty rect y offset. + */ + uint16_t y; -struct dmub_fams2_drr_stream_dynamic_state { - uint16_t stretched_vtotal; - uint8_t use_cur_vtotal; - uint8_t pad; -}; + /** + * Dirty rect width. + */ + uint16_t width; -struct dmub_fams2_stream_dynamic_state { - uint64_t ref_tick; - uint32_t cur_vtotal; - uint16_t adjusted_allow_end_otg_vline; - uint8_t pad[2]; - struct dmub_optc_position ref_otg_pos; - struct dmub_optc_position target_otg_pos; - union { - struct dmub_fams2_legacy_stream_dynamic_state legacy; - struct dmub_fams2_subvp_stream_dynamic_state subvp; - struct dmub_fams2_drr_stream_dynamic_state drr; - } sub_state; + /** + * Dirty rect height. + */ + uint16_t height; }; /* static stream state */ struct dmub_fams2_legacy_stream_static_state { uint8_t vactive_det_fill_delay_otg_vlines; uint8_t programming_delay_otg_vlines; -}; +}; //v0 struct dmub_fams2_subvp_stream_static_state { uint16_t vratio_numerator; @@ -1887,14 +2484,61 @@ struct dmub_fams2_subvp_stream_static_state { uint8_t phantom_otg_inst; uint8_t phantom_pipe_mask; uint8_t phantom_plane_pipe_masks[DMUB_MAX_PHANTOM_PLANES]; // phantom pipe mask per plane (for flip passthrough) -}; +}; //v0 struct dmub_fams2_drr_stream_static_state { uint16_t nom_stretched_vtotal; uint8_t programming_delay_otg_vlines; uint8_t only_stretch_if_required; uint8_t pad[2]; -}; +}; //v0 + +struct dmub_fams2_cmd_legacy_stream_static_state { + uint16_t vactive_det_fill_delay_otg_vlines; + uint16_t programming_delay_otg_vlines; +}; //v1 + +struct dmub_fams2_cmd_subvp_stream_static_state { + uint16_t vratio_numerator; + uint16_t vratio_denominator; + uint16_t phantom_vtotal; + uint16_t phantom_vactive; + uint16_t programming_delay_otg_vlines; + uint16_t prefetch_to_mall_otg_vlines; + union { + struct { + uint8_t is_multi_planar : 1; + uint8_t is_yuv420 : 1; + } bits; + uint8_t all; + } config; + uint8_t phantom_otg_inst; + uint8_t phantom_pipe_mask; + uint8_t pad0; + uint8_t phantom_plane_pipe_masks[DMUB_MAX_PHANTOM_PLANES]; // phantom pipe mask per plane (for flip passthrough) + uint8_t pad1[4 - (DMUB_MAX_PHANTOM_PLANES % 4)]; +}; //v1 + +struct dmub_fams2_cmd_drr_stream_static_state { + uint16_t nom_stretched_vtotal; + uint16_t programming_delay_otg_vlines; + uint8_t only_stretch_if_required; + uint8_t pad[3]; +}; //v1 + +union dmub_fams2_stream_static_sub_state { + struct dmub_fams2_legacy_stream_static_state legacy; + struct dmub_fams2_subvp_stream_static_state subvp; + struct dmub_fams2_drr_stream_static_state drr; +}; //v0 + +union dmub_fams2_cmd_stream_static_sub_state { + COMMON_STREAM_STATIC_SUB_STATE +}; //v1 + +union dmub_fams2_stream_static_sub_state_v2 { + COMMON_STREAM_STATIC_SUB_STATE +}; //v2 struct dmub_fams2_stream_static_state { enum fams2_stream_type type; @@ -1924,13 +2568,45 @@ struct dmub_fams2_stream_static_state { uint8_t pipe_mask; // pipe mask for the whole config uint8_t num_planes; uint8_t plane_pipe_masks[DMUB_MAX_PLANES]; // pipe mask per plane (for flip passthrough) - uint8_t pad[DMUB_MAX_PLANES % 4]; + uint8_t pad[4 - (DMUB_MAX_PLANES % 4)]; + union dmub_fams2_stream_static_sub_state sub_state; +}; //v0 + +struct dmub_fams2_cmd_stream_static_base_state { + enum fams2_stream_type type; + uint32_t otg_vline_time_ns; + uint32_t otg_vline_time_ticks; + uint16_t htotal; + uint16_t vtotal; // nominal vtotal + uint16_t vblank_start; + uint16_t vblank_end; + uint16_t max_vtotal; + uint16_t allow_start_otg_vline; + uint16_t allow_end_otg_vline; + uint16_t drr_keepout_otg_vline; // after this vline, vtotal cannot be changed + uint16_t scheduling_delay_otg_vlines; // min time to budget for ready to microschedule start + uint16_t contention_delay_otg_vlines; // time to budget for contention on execution + uint16_t vline_int_ack_delay_otg_vlines; // min time to budget for vertical interrupt firing + uint16_t allow_to_target_delay_otg_vlines; // time from allow vline to target vline union { - struct dmub_fams2_legacy_stream_static_state legacy; - struct dmub_fams2_subvp_stream_static_state subvp; - struct dmub_fams2_drr_stream_static_state drr; - } sub_state; -}; + struct { + uint8_t is_drr : 1; // stream is DRR enabled + uint8_t clamp_vtotal_min : 1; // clamp vtotal to min instead of nominal + uint8_t min_ttu_vblank_usable : 1; // if min ttu vblank is above wm, no force pstate is needed in blank + } bits; + uint8_t all; + } config; + uint8_t otg_inst; + uint8_t pipe_mask; // pipe mask for the whole config + uint8_t num_planes; + uint8_t plane_pipe_masks[DMUB_MAX_PLANES]; // pipe mask per plane (for flip passthrough) + uint8_t pad[4 - (DMUB_MAX_PLANES % 4)]; +}; //v1 + +struct dmub_fams2_stream_static_state_v1 { + struct dmub_fams2_cmd_stream_static_base_state base; + union dmub_fams2_stream_static_sub_state_v2 sub_state; +}; //v1 /** * enum dmub_fams2_allow_delay_check_mode - macroscheduler mode for breaking on excessive @@ -1966,11 +2642,22 @@ struct dmub_cmd_fams2_global_config { union dmub_fams2_global_feature_config features; uint32_t recovery_timeout_us; uint32_t hwfq_flip_programming_delay_us; + uint32_t max_allow_to_target_delta_us; // how early DCN could assert P-State allow compared to the P-State target }; union dmub_cmd_fams2_config { struct dmub_cmd_fams2_global_config global; - struct dmub_fams2_stream_static_state stream; +// coverity[cert_dcl37_c_violation:FALSE] errno.h, stddef.h, stdint.h not included in atombios.h + struct dmub_fams2_stream_static_state stream; //v0 + union { + struct dmub_fams2_cmd_stream_static_base_state base; + union dmub_fams2_cmd_stream_static_sub_state sub_state; + } stream_v1; //v1 +}; + +struct dmub_fams2_config_v2 { + struct dmub_cmd_fams2_global_config global; + struct dmub_fams2_stream_static_state_v1 stream_v1[DMUB_MAX_STREAMS]; //v1 }; /** @@ -1982,6 +2669,22 @@ struct dmub_rb_cmd_fams2 { }; /** + * Indirect buffer descriptor + */ +struct dmub_ib_data { + union dmub_addr src; // location of indirect buffer in memory + uint16_t size; // indirect buffer size in bytes +}; + +/** + * DMUB rb command definition for commands passed over indirect buffer + */ +struct dmub_rb_cmd_ib { + struct dmub_cmd_header header; + struct dmub_ib_data ib_data; +}; + +/** * enum dmub_cmd_idle_opt_type - Idle optimization command type. */ enum dmub_cmd_idle_opt_type { @@ -2004,6 +2707,11 @@ enum dmub_cmd_idle_opt_type { * DCN hardware notify power state. */ DMUB_CMD__IDLE_OPT_SET_DC_POWER_STATE = 3, + + /** + * DCN notify to release HW. + */ + DMUB_CMD__IDLE_OPT_RELEASE_HW = 4, }; /** @@ -2149,7 +2857,8 @@ struct dmub_dig_transmitter_control_data_v1_7 { uint8_t connobj_id; /**< Connector Object Id defined in ObjectId.h */ uint8_t HPO_instance; /**< HPO instance (0: inst0, 1: inst1) */ uint8_t reserved1; /**< For future use */ - uint8_t reserved2[3]; /**< For future use */ + uint8_t skip_phy_ssc_reduction; + uint8_t reserved2[2]; /**< For future use */ uint32_t reserved3[11]; /**< For future use */ }; @@ -2496,7 +3205,11 @@ enum dp_hpd_type { /** * DP HPD short pulse */ - DP_IRQ + DP_IRQ = 1, + /** + * Failure to acquire DP HPD state + */ + DP_NONE_HPD = 2 }; /** @@ -2763,6 +3476,7 @@ enum dmub_cmd_fams_type { DMUB_CMD__FAMS2_CONFIG = 4, DMUB_CMD__FAMS2_DRR_UPDATE = 5, DMUB_CMD__FAMS2_FLIP = 6, + DMUB_CMD__FAMS2_IB_CONFIG = 7, }; /** @@ -3005,6 +3719,12 @@ struct dmub_cmd_psr_copy_settings_data { * Some panels request main link off before xth vertical line */ uint16_t poweroff_before_vertical_line; + /** + * Some panels cannot handle idle pattern during PSR entry. + * To power down phy before disable stream to avoid sending + * idle pattern. + */ + uint8_t power_down_phy_before_disable_stream; }; /** @@ -3463,6 +4183,12 @@ struct dmub_rb_cmd_psr_set_power_opt { struct dmub_cmd_psr_set_power_opt_data psr_set_power_opt_data; }; +enum dmub_alpm_mode { + ALPM_AUXWAKE = 0, + ALPM_AUXLESS = 1, + ALPM_UNSUPPORTED = 2, +}; + /** * Definition of Replay Residency GPINT command. * Bit[0] - Residency mode for Revision 0 @@ -3534,6 +4260,33 @@ enum replay_state { }; /** + * Definition of a panel replay state + */ +enum pr_state { + PR_STATE_0 = 0x00, // State 0 steady state + // Pending SDP and Unlock before back to State 0 + PR_STATE_0_PENDING_SDP_AND_UNLOCK = 0x01, + PR_STATE_1 = 0x10, // State 1 + PR_STATE_2 = 0x20, // State 2 steady state + // Pending frame transmission before transition to State 2 + PR_STATE_2_PENDING_FRAME_TRANSMISSION = 0x30, + // Active and Powered Up + PR_STATE_2_POWERED = 0x31, + // Active and Powered Down, but need to blank HUBP after DPG_EN latch + PR_STATE_2_PENDING_HUBP_BLANK = 0x32, + // Active and Pending Power Up + PR_STATE_2_PENDING_POWER_UP = 0x33, + // Active and Powered Up, Pending DPG latch + PR_STATE_2_PENDING_LOCK_FOR_DPG_POWER_ON = 0x34, + // Active and Powered Up, Pending SDP and Unlock + PR_STATE_2_PENDING_SDP_AND_UNLOCK = 0x35, + // Pending transmission of AS SDP for timing sync, but no rfb update + PR_STATE_2_PENDING_AS_SDP = 0x36, + // Invalid + PR_STATE_INVALID = 0xFF, +}; + +/** * Replay command sub-types. */ enum dmub_cmd_replay_type { @@ -3574,11 +4327,34 @@ enum dmub_cmd_replay_type { */ DMUB_CMD__REPLAY_DISABLED_ADAPTIVE_SYNC_SDP = 8, /** + * Set version + */ + DMUB_CMD__REPLAY_SET_VERSION = 9, + /** * Set Replay General command. */ DMUB_CMD__REPLAY_SET_GENERAL_CMD = 16, }; +/* + * Panel Replay sub-types + */ +enum dmub_cmd_panel_replay_type { + DMUB_CMD__PR_ENABLE = 0, + DMUB_CMD__PR_COPY_SETTINGS = 1, + DMUB_CMD__PR_UPDATE_STATE = 2, + DMUB_CMD__PR_GENERAL_CMD = 3, +}; + +enum dmub_cmd_panel_replay_state_update_subtype { + PR_STATE_UPDATE_COASTING_VTOTAL = 0x1, + PR_STATE_UPDATE_SYNC_MODE = 0x2, +}; + +enum dmub_cmd_panel_replay_general_subtype { + PR_GENERAL_CMD_DEBUG_OPTION = 0x1, +}; + /** * Replay general command sub-types. */ @@ -3592,6 +4368,22 @@ enum dmub_cmd_replay_general_subtype { */ REPLAY_GENERAL_CMD_DISABLED_ADAPTIVE_SYNC_SDP, REPLAY_GENERAL_CMD_DISABLED_DESYNC_ERROR_DETECTION, + REPLAY_GENERAL_CMD_UPDATE_ERROR_STATUS, + REPLAY_GENERAL_CMD_SET_LOW_RR_ACTIVATE, + REPLAY_GENERAL_CMD_VIDEO_CONFERENCING, +}; + +struct dmub_alpm_auxless_data { + uint16_t lfps_setup_ns; + uint16_t lfps_period_ns; + uint16_t lfps_silence_ns; + uint16_t lfps_t1_t2_override_us; + short lfps_t1_t2_offset_us; + uint8_t lttpr_count; + /* + * Padding to align structure to 4 byte boundary. + */ + uint8_t pad[1]; }; /** @@ -3664,6 +4456,79 @@ struct dmub_cmd_replay_copy_settings_data { * Use FSM state for Replay power up/down */ uint8_t use_phy_fsm; + /** + * Use for AUX-less ALPM LFPS wake operation + */ + struct dmub_alpm_auxless_data auxless_alpm_data; + /** + * @hpo_stream_enc_inst: HPO stream encoder instance + */ + uint8_t hpo_stream_enc_inst; + /** + * @hpo_link_enc_inst: HPO link encoder instance + */ + uint8_t hpo_link_enc_inst; + /** + * Determines if fast resync in ultra sleep mode is enabled/disabled. + */ + uint8_t replay_support_fast_resync_in_ultra_sleep_mode; + /** + * @pad: Align structure to 4 byte boundary. + */ + uint8_t pad[1]; +}; + + +/** + * Replay versions. + */ +enum replay_version { + /** + * FreeSync Replay + */ + REPLAY_VERSION_FREESYNC_REPLAY = 0, + /** + * Panel Replay + */ + REPLAY_VERSION_PANEL_REPLAY = 1, + /** + * Replay not supported. + */ + REPLAY_VERSION_UNSUPPORTED = 0xFF, +}; + +/** + * Data passed from driver to FW in a DMUB_CMD___SET_REPLAY_VERSION command. + */ +struct dmub_cmd_replay_set_version_data { + /** + * Panel Instance. + * Panel instance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * Replay version that FW should implement. + */ + enum replay_version version; + /** + * Explicit padding to 4 byte boundary. + */ + uint8_t pad[3]; +}; + +/** + * Definition of a DMUB_CMD__REPLAY_SET_VERSION command. + */ +struct dmub_rb_cmd_replay_set_version { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__REPLAY_SET_VERSION command. + */ + struct dmub_cmd_replay_set_version_data replay_set_version_data; }; /** @@ -3695,6 +4560,45 @@ enum replay_enable { }; /** + * Data passed from driver to FW in a DMUB_CMD__SMART_POWER_OLED_ENABLE command. + */ +struct dmub_rb_cmd_smart_power_oled_enable_data { + /** + * SMART_POWER_OLED enable or disable. + */ + uint8_t enable; + /** + * Panel Instance. + * Panel isntance to identify which replay_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + + uint16_t peak_nits; + /** + * OTG HW instance. + */ + uint8_t otg_inst; + /** + * DIG FE HW instance. + */ + uint8_t digfe_inst; + /** + * DIG BE HW instance. + */ + uint8_t digbe_inst; + uint8_t debugcontrol; + /* + * vertical interrupt trigger line + */ + uint32_t triggerline; + + uint16_t fixed_max_cll; + + uint8_t pad[2]; +}; + +/** * Data passed from driver to FW in a DMUB_CMD__REPLAY_ENABLE command. */ struct dmub_rb_cmd_replay_enable_data { @@ -3865,9 +4769,9 @@ struct dmub_cmd_replay_set_coasting_vtotal_data { */ uint16_t coasting_vtotal_high; /** - * Explicit padding to 4 byte boundary. + * frame skip number. */ - uint8_t pad[2]; + uint16_t frame_skip_number; }; /** @@ -4018,12 +4922,68 @@ union dmub_replay_cmd_set { */ struct dmub_cmd_replay_disabled_adaptive_sync_sdp_data disabled_adaptive_sync_sdp_data; /** + * Definition of DMUB_CMD__REPLAY_SET_VERSION command data. + */ + struct dmub_cmd_replay_set_version_data version_data; + /** * Definition of DMUB_CMD__REPLAY_SET_GENERAL_CMD command data. */ struct dmub_cmd_replay_set_general_cmd_data set_general_cmd_data; }; /** + * SMART POWER OLED command sub-types. + */ +enum dmub_cmd_smart_power_oled_type { + + /** + * Enable/Disable SMART_POWER_OLED. + */ + DMUB_CMD__SMART_POWER_OLED_ENABLE = 1, + /** + * Get current MaxCLL value if SMART POWER OLED is enabled. + */ + DMUB_CMD__SMART_POWER_OLED_GETMAXCLL = 2, +}; + +/** + * Definition of a DMUB_CMD__SMART_POWER_OLED command. + */ +struct dmub_rb_cmd_smart_power_oled_enable { + /** + * Command header. + */ + struct dmub_cmd_header header; + + struct dmub_rb_cmd_smart_power_oled_enable_data data; +}; + +struct dmub_cmd_smart_power_oled_getmaxcll_input { + uint8_t panel_inst; + uint8_t pad[3]; +}; + +struct dmub_cmd_smart_power_oled_getmaxcll_output { + uint16_t current_max_cll; + uint8_t pad[2]; +}; + +/** + * Definition of a DMUB_CMD__SMART_POWER_OLED command. + */ +struct dmub_rb_cmd_smart_power_oled_getmaxcll { + struct dmub_cmd_header header; /**< Command header */ + /** + * Data passed from driver to FW in a DMUB_CMD__SMART_POWER_OLED_GETMAXCLL command. + */ + union dmub_cmd_smart_power_oled_getmaxcll_data { + struct dmub_cmd_smart_power_oled_getmaxcll_input input; /**< Input */ + struct dmub_cmd_smart_power_oled_getmaxcll_output output; /**< Output */ + uint32_t output_raw; /**< Raw data output */ + } data; +}; + +/** * Set of HW components that can be locked. * * Note: If updating with more HW components, fields @@ -4105,6 +5065,7 @@ enum hw_lock_client { */ HW_LOCK_CLIENT_REPLAY = 4, HW_LOCK_CLIENT_FAMS2 = 5, + HW_LOCK_CLIENT_CURSOR_OFFLOAD = 6, /** * Invalid client. */ @@ -4212,6 +5173,46 @@ enum dmub_cmd_abm_type { * Get the current ACE curve. */ DMUB_CMD__ABM_GET_ACE_CURVE = 10, + + /** + * Get current histogram data + */ + DMUB_CMD__ABM_GET_HISTOGRAM_DATA = 11, +}; + +/** + * LSDMA command sub-types. + */ +enum dmub_cmd_lsdma_type { + /** + * Initialize parameters for LSDMA. + * Ring buffer is mapped to the ring buffer + */ + DMUB_CMD__LSDMA_INIT_CONFIG = 0, + /** + * LSDMA copies data from source to destination linearly + */ + DMUB_CMD__LSDMA_LINEAR_COPY = 1, + /** + * LSDMA copies data from source to destination linearly in sub window + */ + DMUB_CMD__LSDMA_LINEAR_SUB_WINDOW_COPY = 2, + /** + * Send the tiled-to-tiled copy command + */ + DMUB_CMD__LSDMA_TILED_TO_TILED_COPY = 3, + /** + * Send the poll reg write command + */ + DMUB_CMD__LSDMA_POLL_REG_WRITE = 4, + /** + * Send the pio copy command + */ + DMUB_CMD__LSDMA_PIO_COPY = 5, + /** + * Send the pio constfill command + */ + DMUB_CMD__LSDMA_PIO_CONSTFILL = 6, }; struct abm_ace_curve { @@ -4806,6 +5807,20 @@ enum dmub_abm_ace_curve_type { }; /** + * enum dmub_abm_histogram_type - Histogram type. + */ +enum dmub_abm_histogram_type { + /** + * ACE curve as defined by the SW layer. + */ + ABM_HISTOGRAM_TYPE__SW = 0, + /** + * ACE curve as defined by the SW to HW translation interface layer. + */ + ABM_HISTOGRAM_TYPE__SW_IF = 1, +}; + +/** * Definition of a DMUB_CMD__ABM_GET_ACE_CURVE command. */ struct dmub_rb_cmd_abm_get_ace_curve { @@ -4841,6 +5856,41 @@ struct dmub_rb_cmd_abm_get_ace_curve { }; /** + * Definition of a DMUB_CMD__ABM_GET_HISTOGRAM command. + */ +struct dmub_rb_cmd_abm_get_histogram { + /** + * Command header. + */ + struct dmub_cmd_header header; + + /** + * Address where Histogram should be copied. + */ + union dmub_addr dest; + + /** + * Type of Histogram being queried. + */ + enum dmub_abm_histogram_type histogram_type; + + /** + * Indirect buffer length. + */ + uint16_t bytes; + + /** + * eDP panel instance. + */ + uint8_t panel_inst; + + /** + * Explicit padding to 4 byte boundary. + */ + uint8_t pad; +}; + +/** * Definition of a DMUB_CMD__ABM_SAVE_RESTORE command. */ struct dmub_rb_cmd_abm_save_restore { @@ -5204,6 +6254,64 @@ struct dmub_rb_cmd_get_usbc_cable_id { } data; }; +enum dmub_cmd_fused_io_sub_type { + DMUB_CMD__FUSED_IO_EXECUTE = 0, + DMUB_CMD__FUSED_IO_ABORT = 1, +}; + +enum dmub_cmd_fused_request_type { + FUSED_REQUEST_READ, + FUSED_REQUEST_WRITE, + FUSED_REQUEST_POLL, +}; + +enum dmub_cmd_fused_request_status { + FUSED_REQUEST_STATUS_SUCCESS, + FUSED_REQUEST_STATUS_BEGIN, + FUSED_REQUEST_STATUS_SUBMIT, + FUSED_REQUEST_STATUS_REPLY, + FUSED_REQUEST_STATUS_POLL, + FUSED_REQUEST_STATUS_ABORTED, + FUSED_REQUEST_STATUS_FAILED = 0x80, + FUSED_REQUEST_STATUS_INVALID, + FUSED_REQUEST_STATUS_BUSY, + FUSED_REQUEST_STATUS_TIMEOUT, + FUSED_REQUEST_STATUS_POLL_TIMEOUT, +}; + +struct dmub_cmd_fused_request { + uint8_t status; + uint8_t type : 2; + uint8_t _reserved0 : 3; + uint8_t poll_mask_msb : 3; // Number of MSB to zero out from last byte before comparing + uint8_t identifier; + uint8_t _reserved1; + uint32_t timeout_us; + union dmub_cmd_fused_request_location { + struct dmub_cmd_fused_request_location_i2c { + uint8_t is_aux : 1; // False + uint8_t ddc_line : 3; + uint8_t over_aux : 1; + uint8_t _reserved0 : 3; + uint8_t address; + uint8_t offset; + uint8_t length; + } i2c; + struct dmub_cmd_fused_request_location_aux { + uint32_t is_aux : 1; // True + uint32_t ddc_line : 3; + uint32_t address : 20; + uint32_t length : 8; // Automatically split into 16B transactions + } aux; + } u; + uint8_t buffer[0x30]; // Read: out, write: in, poll: expected +}; + +struct dmub_rb_cmd_fused_io { + struct dmub_cmd_header header; + struct dmub_cmd_fused_request request; +}; + /** * Command type of a DMUB_CMD__SECURE_DISPLAY command */ @@ -5312,6 +6420,315 @@ struct dmub_rb_cmd_assr_enable { }; /** + * Current definition of "ips_mode" from driver + */ +enum ips_residency_mode { + IPS_RESIDENCY__IPS1_MAX, + IPS_RESIDENCY__IPS2, + IPS_RESIDENCY__IPS1_RCG, + IPS_RESIDENCY__IPS1_ONO2_ON, + IPS_RESIDENCY__IPS1_Z8_RETENTION, + IPS_RESIDENCY__PG_ONO_LAST_SEEN_IN_IPS, + IPS_RESIDENCY__PG_ONO_CURRENT_STATE +}; + +#define NUM_IPS_HISTOGRAM_BUCKETS 16 + +/** + * IPS residency statistics to be sent to driver - subset of struct dmub_ips_residency_stats + */ +struct dmub_ips_residency_info { + uint32_t residency_millipercent; + uint32_t entry_counter; + uint32_t histogram[NUM_IPS_HISTOGRAM_BUCKETS]; + uint64_t total_time_us; + uint64_t total_inactive_time_us; + uint32_t ono_pg_state_at_collection; + uint32_t ono_pg_state_last_seen_in_ips; +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__IPS_RESIDENCY_CNTL command. + */ +struct dmub_cmd_ips_residency_cntl_data { + uint8_t panel_inst; + uint8_t start_measurement; + uint8_t padding[2]; // align to 4-byte boundary +}; + +struct dmub_rb_cmd_ips_residency_cntl { + struct dmub_cmd_header header; + struct dmub_cmd_ips_residency_cntl_data cntl_data; +}; + +/** + * Data passed from FW to driver in a DMUB_CMD__IPS_QUERY_RESIDENCY_INFO command. + */ +struct dmub_cmd_ips_query_residency_info_data { + union dmub_addr dest; + uint32_t size; + uint32_t ips_mode; + uint8_t panel_inst; + uint8_t padding[3]; // align to 4-byte boundary +}; + +struct dmub_rb_cmd_ips_query_residency_info { + struct dmub_cmd_header header; + struct dmub_cmd_ips_query_residency_info_data info_data; +}; + +/** + * struct dmub_cmd_cursor_offload_init_data - Payload for cursor offload init command. + */ +struct dmub_cmd_cursor_offload_init_data { + union dmub_addr state_addr; /**< State address for dmub_cursor_offload */ + uint32_t state_size; /**< State size for dmub_cursor_offload */ +}; + +/** + * struct dmub_rb_cmd_cursor_offload_init - Data for initializing cursor offload. + */ +struct dmub_rb_cmd_cursor_offload_init { + struct dmub_cmd_header header; + struct dmub_cmd_cursor_offload_init_data init_data; +}; + +/** + * struct dmub_cmd_cursor_offload_stream_data - Payload for cursor offload stream command. + */ +struct dmub_cmd_cursor_offload_stream_data { + uint32_t otg_inst: 4; /**< OTG instance to control */ + uint32_t reserved: 28; /**< Reserved for future use */ + uint32_t line_time_in_ns; /**< Line time in ns for the OTG */ + uint32_t v_total_max; /**< OTG v_total_max */ +}; + +/** + * struct dmub_rb_cmd_cursor_offload_stream_cntl - Controls a stream for cursor offload. + */ +struct dmub_rb_cmd_cursor_offload_stream_cntl { + struct dmub_cmd_header header; + struct dmub_cmd_cursor_offload_stream_data data; +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__PR_ENABLE command. + */ +struct dmub_cmd_pr_enable_data { + /** + * Panel Replay enable or disable. + */ + uint8_t enable; + /** + * Panel Instance. + * Panel isntance to identify which replay_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * Phy state to enter. + * Values to use are defined in dmub_phy_fsm_state + */ + uint8_t phy_fsm_state; + /** + * Phy rate for DP - RBR/HBR/HBR2/HBR3. + * Set this using enum phy_link_rate. + * This does not support HDMI/DP2 for now. + */ + uint8_t phy_rate; + /** + * @hpo_stream_enc_inst: HPO stream encoder instance + */ + uint8_t hpo_stream_enc_inst; + /** + * @hpo_link_enc_inst: HPO link encoder instance + */ + uint8_t hpo_link_enc_inst; + /** + * @pad: Align structure to 4 byte boundary. + */ + uint8_t pad[2]; +}; + +/** + * Definition of a DMUB_CMD__PR_ENABLE command. + * Panel Replay enable/disable is controlled using action in data. + */ +struct dmub_rb_cmd_pr_enable { + /** + * Command header. + */ + struct dmub_cmd_header header; + + struct dmub_cmd_pr_enable_data data; +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__PR_COPY_SETTINGS command. + */ +struct dmub_cmd_pr_copy_settings_data { + /** + * Flags that can be set by driver to change some replay behaviour. + */ + union pr_debug_flags debug; + + /** + * @flags: Flags used to determine feature functionality. + */ + union pr_hw_flags flags; + + /** + * DPP HW instance. + */ + uint8_t dpp_inst; + /** + * OTG HW instance. + */ + uint8_t otg_inst; + /** + * DIG FE HW instance. + */ + uint8_t digfe_inst; + /** + * DIG BE HW instance. + */ + uint8_t digbe_inst; + /** + * AUX HW instance. + */ + uint8_t aux_inst; + /** + * Panel Instance. + * Panel isntance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * Length of each horizontal line in ns. + */ + uint32_t line_time_in_ns; + /** + * PHY instance. + */ + uint8_t dpphy_inst; + /** + * Determines if SMU optimzations are enabled/disabled. + */ + uint8_t smu_optimizations_en; + /* + * Use FSM state for Replay power up/down + */ + uint8_t use_phy_fsm; + /* + * Use FSFT afftet pixel clk + */ + uint32_t pix_clk_100hz; + /* + * Use Original pixel clock + */ + uint32_t sink_pix_clk_100hz; + /** + * Use for AUX-less ALPM LFPS wake operation + */ + struct dmub_alpm_auxless_data auxless_alpm_data; + /** + * @hpo_stream_enc_inst: HPO stream encoder instance + */ + uint8_t hpo_stream_enc_inst; + /** + * @hpo_link_enc_inst: HPO link encoder instance + */ + uint8_t hpo_link_enc_inst; + /** + * @pad: Align structure to 4 byte boundary. + */ + uint8_t pad[2]; +}; + +/** + * Definition of a DMUB_CMD__PR_COPY_SETTINGS command. + */ +struct dmub_rb_cmd_pr_copy_settings { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__PR_COPY_SETTINGS command. + */ + struct dmub_cmd_pr_copy_settings_data data; +}; + +struct dmub_cmd_pr_update_state_data { + /** + * Panel Instance. + * Panel isntance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + + uint8_t pad[3]; // align to 4-byte boundary + /* + * Update flags to control the update behavior. + */ + uint32_t update_flag; + /** + * state/data to set. + */ + uint32_t coasting_vtotal; + uint32_t sync_mode; +}; + +struct dmub_cmd_pr_general_cmd_data { + /** + * Panel Instance. + * Panel isntance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * subtype: PR general cmd sub type + */ + uint8_t subtype; + + uint8_t pad[2]; + /** + * config data by different subtypes + */ + union { + uint32_t u32All; + } data; +}; + +/** + * Definition of a DMUB_CMD__PR_UPDATE_STATE command. + */ +struct dmub_rb_cmd_pr_update_state { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__PR_UPDATE_STATE command. + */ + struct dmub_cmd_pr_update_state_data data; +}; + +/** + * Definition of a DMUB_CMD__PR_GENERAL_CMD command. + */ +struct dmub_rb_cmd_pr_general_cmd { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__PR_GENERAL_CMD command. + */ + struct dmub_cmd_pr_general_cmd_data data; +}; + +/** * union dmub_rb_cmd - DMUB inbox command. */ union dmub_rb_cmd { @@ -5482,6 +6899,11 @@ union dmub_rb_cmd { struct dmub_rb_cmd_abm_get_ace_curve abm_get_ace_curve; /** + * Definition of a DMUB_CMD__ABM_GET_HISTOGRAM command. + */ + struct dmub_rb_cmd_abm_get_histogram abm_get_histogram; + + /** * Definition of a DMUB_CMD__ABM_SET_EVENT command. */ struct dmub_rb_cmd_abm_set_event abm_set_event; @@ -5570,6 +6992,10 @@ union dmub_rb_cmd { * Definition of a DMUB_CMD__IDLE_OPT_SET_DC_POWER_STATE command. */ struct dmub_rb_cmd_idle_opt_set_dc_power_state idle_opt_set_dc_power_state; + /** + * Definition of a DMUB_CMD__REPLAY_SET_VERSION command. + */ + struct dmub_rb_cmd_replay_set_version replay_set_version; /* * Definition of a DMUB_CMD__REPLAY_COPY_SETTINGS command. */ @@ -5612,11 +7038,57 @@ union dmub_rb_cmd { * Definition of a DMUB_CMD__PSP_ASSR_ENABLE command. */ struct dmub_rb_cmd_assr_enable assr_enable; + struct dmub_rb_cmd_fams2 fams2_config; + struct dmub_rb_cmd_ib ib_fams2_config; + struct dmub_rb_cmd_fams2_drr_update fams2_drr_update; struct dmub_rb_cmd_fams2_flip fams2_flip; + + struct dmub_rb_cmd_fused_io fused_io; + + /** + * Definition of a DMUB_CMD__LSDMA command. + */ + struct dmub_rb_cmd_lsdma lsdma; + + struct dmub_rb_cmd_ips_residency_cntl ips_residency_cntl; + + struct dmub_rb_cmd_ips_query_residency_info ips_query_residency_info; + /** + * Definition of a DMUB_CMD__CURSOR_OFFLOAD_INIT command. + */ + struct dmub_rb_cmd_cursor_offload_init cursor_offload_init; + /** + * Definition of a DMUB_CMD__CURSOR_OFFLOAD control commands. + * - DMUB_CMD__CURSOR_OFFLOAD_STREAM_ENABLE + * - DMUB_CMD__CURSOR_OFFLOAD_STREAM_DISABLE + * - DMUB_CMD__CURSOR_OFFLOAD_STREAM_PROGRAM + * - DMUB_CMD__CURSOR_OFFLOAD_STREAM_UPDATE_DRR + */ + struct dmub_rb_cmd_cursor_offload_stream_cntl cursor_offload_stream_ctnl; + /** + * Definition of a DMUB_CMD__SMART_POWER_OLED_ENABLE command. + */ + struct dmub_rb_cmd_smart_power_oled_enable smart_power_oled_enable; + /** + * Definition of a DMUB_CMD__DMUB_CMD__SMART_POWER_OLED_GETMAXCLL command. + */ + struct dmub_rb_cmd_smart_power_oled_getmaxcll smart_power_oled_getmaxcll; + /* + * Definition of a DMUB_CMD__REPLAY_COPY_SETTINGS command. + */ + struct dmub_rb_cmd_pr_copy_settings pr_copy_settings; + /** + * Definition of a DMUB_CMD__REPLAY_ENABLE command. + */ + struct dmub_rb_cmd_pr_enable pr_enable; + + struct dmub_rb_cmd_pr_update_state pr_update_state; + + struct dmub_rb_cmd_pr_general_cmd pr_general_cmd; }; /** @@ -5647,6 +7119,7 @@ union dmub_rb_out_cmd { * HPD sense notification command. */ struct dmub_rb_cmd_hpd_sense_notify hpd_sense_notify; + struct dmub_rb_cmd_fused_io fused_io; }; #pragma pack(pop) @@ -5694,6 +7167,45 @@ static inline bool dmub_rb_empty(struct dmub_rb *rb) } /** + * @brief gets number of outstanding requests in the RB + * + * @param rb DMUB Ringbuffer + * @return true if full + */ +static inline uint32_t dmub_rb_num_outstanding(struct dmub_rb *rb) +{ + uint32_t data_count; + + if (rb->wrpt >= rb->rptr) + data_count = rb->wrpt - rb->rptr; + else + data_count = rb->capacity - (rb->rptr - rb->wrpt); + + return data_count / DMUB_RB_CMD_SIZE; +} + +/** + * @brief gets number of free buffers in the RB + * + * @param rb DMUB Ringbuffer + * @return true if full + */ +static inline uint32_t dmub_rb_num_free(struct dmub_rb *rb) +{ + uint32_t data_count; + + if (rb->wrpt >= rb->rptr) + data_count = rb->wrpt - rb->rptr; + else + data_count = rb->capacity - (rb->rptr - rb->wrpt); + + /* +1 because 1 entry is always unusable */ + data_count += DMUB_RB_CMD_SIZE; + + return (rb->capacity - data_count) / DMUB_RB_CMD_SIZE; +} + +/** * @brief Checks if the ringbuffer is full * * @param rb DMUB Ringbuffer @@ -5709,6 +7221,7 @@ static inline bool dmub_rb_full(struct dmub_rb *rb) else data_count = rb->capacity - (rb->rptr - rb->wrpt); + /* -1 because 1 entry is always unusable */ return (data_count == (rb->capacity - DMUB_RB_CMD_SIZE)); } @@ -5723,15 +7236,18 @@ static inline bool dmub_rb_full(struct dmub_rb *rb) static inline bool dmub_rb_push_front(struct dmub_rb *rb, const union dmub_rb_cmd *cmd) { - uint64_t volatile *dst = (uint64_t volatile *)((uint8_t *)(rb->base_address) + rb->wrpt); - const uint64_t *src = (const uint64_t *)cmd; + uint8_t *dst = (uint8_t *)(rb->base_address) + rb->wrpt; + const uint8_t *src = (const uint8_t *)cmd; uint8_t i; + if (rb->capacity == 0) + return false; + if (dmub_rb_full(rb)) return false; // copying data - for (i = 0; i < DMUB_RB_CMD_SIZE / sizeof(uint64_t); i++) + for (i = 0; i < DMUB_RB_CMD_SIZE; i++) *dst++ = *src++; rb->wrpt += DMUB_RB_CMD_SIZE; @@ -5756,6 +7272,9 @@ static inline bool dmub_rb_out_push_front(struct dmub_rb *rb, uint8_t *dst = (uint8_t *)(rb->base_address) + rb->wrpt; const uint8_t *src = (const uint8_t *)cmd; + if (rb->capacity == 0) + return false; + if (dmub_rb_full(rb)) return false; @@ -5801,6 +7320,9 @@ static inline void dmub_rb_get_rptr_with_offset(struct dmub_rb *rb, uint32_t num_cmds, uint32_t *next_rptr) { + if (rb->capacity == 0) + return; + *next_rptr = rb->rptr + DMUB_RB_CMD_SIZE * num_cmds; if (*next_rptr >= rb->capacity) @@ -5864,6 +7386,9 @@ static inline bool dmub_rb_out_front(struct dmub_rb *rb, */ static inline bool dmub_rb_pop_front(struct dmub_rb *rb) { + if (rb->capacity == 0) + return false; + if (dmub_rb_empty(rb)) return false; @@ -5888,6 +7413,9 @@ static inline void dmub_rb_flush_pending(const struct dmub_rb *rb) uint32_t rptr = rb->rptr; uint32_t wptr = rb->wrpt; + if (rb->capacity == 0) + return; + while (rptr != wptr) { uint64_t *data = (uint64_t *)((uint8_t *)(rb->base_address) + rptr); uint8_t i; |