diff options
Diffstat (limited to 'drivers/gpu/drm/amd/include/atombios.h')
| -rw-r--r-- | drivers/gpu/drm/amd/include/atombios.h | 40 |
1 files changed, 20 insertions, 20 deletions
diff --git a/drivers/gpu/drm/amd/include/atombios.h b/drivers/gpu/drm/amd/include/atombios.h index 15943bc21bc5..b344acefc606 100644 --- a/drivers/gpu/drm/amd/include/atombios.h +++ b/drivers/gpu/drm/amd/include/atombios.h @@ -4107,7 +4107,7 @@ typedef struct _ATOM_FAKE_EDID_PATCH_RECORD { UCHAR ucRecordType; UCHAR ucFakeEDIDLength; // = 128 means EDID length is 128 bytes, otherwise the EDID length = ucFakeEDIDLength*128 - UCHAR ucFakeEDIDString[1]; // This actually has ucFakeEdidLength elements. + UCHAR ucFakeEDIDString[]; // This actually has ucFakeEdidLength elements. } ATOM_FAKE_EDID_PATCH_RECORD; typedef struct _ATOM_PANEL_RESOLUTION_PATCH_RECORD @@ -4308,7 +4308,7 @@ typedef struct _ATOM_DPCD_INFO // note2: From RV770, the memory is more than 32bit addressable, so we will change // ucTableFormatRevision=1,ucTableContentRevision=4, the strcuture remains // exactly same as 1.1 and 1.2 (1.3 is never in use), but ulStartAddrUsedByFirmware -// (in offset to start of memory address) is KB aligned instead of byte aligend. +// (in offset to start of memory address) is KB aligned instead of byte aligned. // Note3: /* If we change usReserved to "usFBUsedbyDrvInKB", then to VBIOS this usFBUsedbyDrvInKB is a predefined, unchanged constant across VGA or non VGA adapter, @@ -4386,7 +4386,7 @@ typedef struct _ATOM_GPIO_PIN_ASSIGNMENT typedef struct _ATOM_GPIO_PIN_LUT { ATOM_COMMON_TABLE_HEADER sHeader; - ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[1]; + ATOM_GPIO_PIN_ASSIGNMENT asGPIO_Pin[]; }ATOM_GPIO_PIN_LUT; /****************************************************************************/ @@ -4513,7 +4513,7 @@ typedef struct _ATOM_DISPLAY_OBJECT_PATH USHORT usSize; //the size of ATOM_DISPLAY_OBJECT_PATH USHORT usConnObjectId; //Connector Object ID USHORT usGPUObjectId; //GPU ID - USHORT usGraphicObjIds[1]; //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector. + USHORT usGraphicObjIds[]; //1st Encoder Obj source from GPU to last Graphic Obj destinate to connector. }ATOM_DISPLAY_OBJECT_PATH; typedef struct _ATOM_DISPLAY_EXTERNAL_OBJECT_PATH @@ -4530,7 +4530,7 @@ typedef struct _ATOM_DISPLAY_OBJECT_PATH_TABLE UCHAR ucNumOfDispPath; UCHAR ucVersion; UCHAR ucPadding[2]; - ATOM_DISPLAY_OBJECT_PATH asDispPath[1]; + ATOM_DISPLAY_OBJECT_PATH asDispPath[]; }ATOM_DISPLAY_OBJECT_PATH_TABLE; typedef struct _ATOM_OBJECT //each object has this structure @@ -4545,7 +4545,7 @@ typedef struct _ATOM_OBJECT_TABLE //Above 4 object table { UCHAR ucNumberOfObjects; UCHAR ucPadding[3]; - ATOM_OBJECT asObjects[1]; + ATOM_OBJECT asObjects[]; }ATOM_OBJECT_TABLE; typedef struct _ATOM_SRC_DST_TABLE_FOR_ONE_OBJECT //usSrcDstTableOffset pointing to this structure @@ -4733,7 +4733,7 @@ typedef struct _ATOM_CONNECTOR_DEVICE_TAG_RECORD ATOM_COMMON_RECORD_HEADER sheader; UCHAR ucNumberOfDevice; UCHAR ucReserved; - ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[1]; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT", 1 is only for allocation + ATOM_CONNECTOR_DEVICE_TAG asDeviceTag[]; //This Id is same as "ATOM_DEVICE_XXX_SUPPORT" }ATOM_CONNECTOR_DEVICE_TAG_RECORD; @@ -4793,7 +4793,7 @@ typedef struct _ATOM_OBJECT_GPIO_CNTL_RECORD ATOM_COMMON_RECORD_HEADER sheader; UCHAR ucFlags; // Future expnadibility UCHAR ucNumberOfPins; // Number of GPIO pins used to control the object - ATOM_GPIO_PIN_CONTROL_PAIR asGpio[1]; // the real gpio pin pair determined by number of pins ucNumberOfPins + ATOM_GPIO_PIN_CONTROL_PAIR asGpio[]; // the real gpio pin pair determined by number of pins ucNumberOfPins }ATOM_OBJECT_GPIO_CNTL_RECORD; //Definitions for GPIO pin state @@ -4982,7 +4982,7 @@ typedef struct _ATOM_BRACKET_LAYOUT_RECORD UCHAR ucWidth; UCHAR ucConnNum; UCHAR ucReserved; - ATOM_CONNECTOR_LAYOUT_INFO asConnInfo[1]; + ATOM_CONNECTOR_LAYOUT_INFO asConnInfo[]; }ATOM_BRACKET_LAYOUT_RECORD; @@ -5146,7 +5146,7 @@ typedef struct _ATOM_I2C_VOLTAGE_OBJECT_V3 UCHAR ucVoltageControlOffset; UCHAR ucVoltageControlFlag; // Bit0: 0 - One byte data; 1 - Two byte data UCHAR ulReserved[3]; - VOLTAGE_LUT_ENTRY asVolI2cLut[1]; // end with 0xff + VOLTAGE_LUT_ENTRY asVolI2cLut[]; // end with 0xff }ATOM_I2C_VOLTAGE_OBJECT_V3; // ATOM_I2C_VOLTAGE_OBJECT_V3.ucVoltageControlFlag @@ -5161,7 +5161,7 @@ typedef struct _ATOM_GPIO_VOLTAGE_OBJECT_V3 UCHAR ucPhaseDelay; // phase delay in unit of micro second UCHAR ucReserved; ULONG ulGpioMaskVal; // GPIO Mask value - VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[1]; + VOLTAGE_LUT_ENTRY_V2 asVolGpioLut[]; }ATOM_GPIO_VOLTAGE_OBJECT_V3; typedef struct _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 @@ -5171,7 +5171,7 @@ typedef struct _ATOM_LEAKAGE_VOLTAGE_OBJECT_V3 UCHAR ucLeakageEntryNum; // indicate the entry number of LeakageId/Voltage Lut table UCHAR ucReserved[2]; ULONG ulMaxVoltageLevel; - LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[1]; + LEAKAGE_VOLTAGE_LUT_ENTRY_V2 asLeakageIdLut[]; }ATOM_LEAKAGE_VOLTAGE_OBJECT_V3; @@ -6017,7 +6017,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_7 #define SYS_INFO_GPUCAPS__TMDSHDMI_COHERENT_SINGLEPLL_MODE 0x01 #define SYS_INFO_GPUCAPS__DP_SINGLEPLL_MODE 0x02 #define SYS_INFO_GPUCAPS__DISABLE_AUX_MODE_DETECT 0x08 -#define SYS_INFO_GPUCAPS__ENABEL_DFS_BYPASS 0x10 +#define SYS_INFO_GPUCAPS__ENABLE_DFS_BYPASS 0x10 //ulGPUCapInfo[16]=1 indicate SMC firmware is able to support GNB fast resume function, so that driver can call SMC to program most of GNB register during resuming, from ML #define SYS_INFO_GPUCAPS__GNB_FAST_RESUME_CAPABLE 0x00010000 @@ -6460,7 +6460,7 @@ typedef struct _ATOM_INTEGRATED_SYSTEM_INFO_V1_9 // ulGPUCapInfo #define SYS_INFO_V1_9_GPUCAPSINFO_DISABLE_AUX_MODE_DETECT 0x08 -#define SYS_INFO_V1_9_GPUCAPSINFO_ENABEL_DFS_BYPASS 0x10 +#define SYS_INFO_V1_9_GPUCAPSINFO_ENABLE_DFS_BYPASS 0x10 //ulGPUCapInfo[16]=1 indicate SMC firmware is able to support GNB fast resume function, so that driver can call SMC to program most of GNB register during resuming, from ML #define SYS_INFO_V1_9_GPUCAPSINFO_GNB_FAST_RESUME_CAPABLE 0x00010000 //ulGPUCapInfo[18]=1 indicate the IOMMU is not available @@ -6599,7 +6599,7 @@ typedef struct _ATOM_FUSION_SYSTEM_INFO_V3 typedef struct _ATOM_I2C_DATA_RECORD { UCHAR ucNunberOfBytes; //Indicates how many bytes SW needs to write to the external ASIC for one block, besides to "Start" and "Stop" - UCHAR ucI2CData[1]; //I2C data in bytes, should be less than 16 bytes usually + UCHAR ucI2CData[]; //I2C data in bytes, should be less than 16 bytes usually }ATOM_I2C_DATA_RECORD; @@ -6610,14 +6610,14 @@ typedef struct _ATOM_I2C_DEVICE_SETUP_INFO UCHAR ucSSChipID; //SS chip being used UCHAR ucSSChipSlaveAddr; //Slave Address to set up this SS chip UCHAR ucNumOfI2CDataRecords; //number of data block - ATOM_I2C_DATA_RECORD asI2CData[1]; + ATOM_I2C_DATA_RECORD asI2CData[]; }ATOM_I2C_DEVICE_SETUP_INFO; //========================================================================================== typedef struct _ATOM_ASIC_MVDD_INFO { ATOM_COMMON_TABLE_HEADER sHeader; - ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[1]; + ATOM_I2C_DEVICE_SETUP_INFO asI2CSetup[]; }ATOM_ASIC_MVDD_INFO; //========================================================================================== @@ -6679,7 +6679,7 @@ typedef struct _ATOM_ASIC_INTERNAL_SS_INFO typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V2 { ATOM_COMMON_TABLE_HEADER sHeader; - ATOM_ASIC_SS_ASSIGNMENT_V2 asSpreadSpectrum[1]; //this is point only. + ATOM_ASIC_SS_ASSIGNMENT_V2 asSpreadSpectrum[]; //this is point only. }ATOM_ASIC_INTERNAL_SS_INFO_V2; typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V3 @@ -6701,7 +6701,7 @@ typedef struct _ATOM_ASIC_SS_ASSIGNMENT_V3 typedef struct _ATOM_ASIC_INTERNAL_SS_INFO_V3 { ATOM_COMMON_TABLE_HEADER sHeader; - ATOM_ASIC_SS_ASSIGNMENT_V3 asSpreadSpectrum[1]; //this is pointer only. + ATOM_ASIC_SS_ASSIGNMENT_V3 asSpreadSpectrum[]; //this is pointer only. }ATOM_ASIC_INTERNAL_SS_INFO_V3; @@ -9292,7 +9292,7 @@ typedef struct { typedef struct { VFCT_IMAGE_HEADER VbiosHeader; - UCHAR VbiosContent[1]; + UCHAR VbiosContent[]; }GOP_VBIOS_CONTENT; typedef struct { |