diff options
Diffstat (limited to 'drivers/gpu/drm/bridge/Kconfig')
| -rw-r--r-- | drivers/gpu/drm/bridge/Kconfig | 279 |
1 files changed, 270 insertions, 9 deletions
diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig index 43271c21d3fc..a250afd8d662 100644 --- a/drivers/gpu/drm/bridge/Kconfig +++ b/drivers/gpu/drm/bridge/Kconfig @@ -8,24 +8,45 @@ config DRM_BRIDGE config DRM_PANEL_BRIDGE def_bool y depends on DRM_BRIDGE - depends on DRM_KMS_HELPER select DRM_PANEL help DRM bridge wrapper of DRM panels +config DRM_AUX_BRIDGE + tristate + depends on DRM_BRIDGE && OF + select AUXILIARY_BUS + select DRM_KMS_HELPER + select DRM_PANEL_BRIDGE + help + Simple transparent bridge that is used by several non-DRM drivers to + build bridges chain. + +config DRM_AUX_HPD_BRIDGE + tristate + depends on DRM_BRIDGE && OF + select AUXILIARY_BUS + help + Simple bridge that terminates the bridge chain and provides HPD + support. + menu "Display Interface Bridges" depends on DRM && DRM_BRIDGE -config DRM_CDNS_DSI - tristate "Cadence DPI/DSI bridge" +config DRM_CHIPONE_ICN6211 + tristate "Chipone ICN6211 MIPI-DSI/RGB Converter bridge" + depends on OF select DRM_KMS_HELPER select DRM_MIPI_DSI select DRM_PANEL_BRIDGE - select GENERIC_PHY_MIPI_DPHY - depends on OF + select REGMAP_I2C help - Support Cadence DPI to DSI bridge. This is an internal - bridge and is meant to be directly embedded in a SoC. + ICN6211 is MIPI-DSI/RGB Converter bridge from chipone. + + It has a flexible configuration of MIPI DSI signal input + and produce RGB565, RGB666, RGB888 output format. + + If in doubt, say "N". config DRM_CHRONTEL_CH7033 tristate "Chrontel CH7033 Video Encoder" @@ -37,17 +58,140 @@ config DRM_CHRONTEL_CH7033 If in doubt, say "N". +config DRM_CROS_EC_ANX7688 + tristate "ChromeOS EC ANX7688 bridge" + depends on OF + depends on I2C_CROS_EC_TUNNEL || COMPILE_TEST + select DRM_KMS_HELPER + select REGMAP_I2C + help + ChromeOS EC ANX7688 is an ultra-low power + 4K Ultra-HD (4096x2160p60) mobile HD transmitter + designed for ChromeOS devices. It converts HDMI + 2.0 to DisplayPort 1.3 Ultra-HD. It is connected + to the ChromeOS Embedded Controller. + config DRM_DISPLAY_CONNECTOR tristate "Display connector support" depends on OF help Driver for display connectors with support for DDC and hot-plug - detection. Most display controller handle display connectors + detection. Most display controllers handle display connectors internally and don't need this driver, but the DRM subsystem is moving towards separating connector handling from display controllers on ARM-based platforms. Saying Y here when this driver is not needed will not cause any issue. +config DRM_FSL_LDB + tristate "Freescale i.MX8MP LDB bridge" + depends on OF + depends on ARCH_MXC || COMPILE_TEST + select DRM_KMS_HELPER + select DRM_PANEL_BRIDGE + help + Support for i.MX8MP DPI-to-LVDS on-SoC encoder. + +config DRM_I2C_NXP_TDA998X + tristate "NXP Semiconductors TDA998X HDMI encoder" + default m if DRM_TILCDC + select CEC_CORE if CEC_NOTIFIER + select DRM_KMS_HELPER + select SND_SOC_HDMI_CODEC if SND_SOC + help + Support for NXP Semiconductors TDA998X HDMI encoders. + +config DRM_ITE_IT6263 + tristate "ITE IT6263 LVDS/HDMI bridge" + depends on OF + select DRM_DISPLAY_HDMI_STATE_HELPER + select DRM_DISPLAY_HELPER + select DRM_BRIDGE_CONNECTOR + select DRM_KMS_HELPER + select REGMAP_I2C + help + ITE IT6263 LVDS to HDMI bridge chip driver. + +config DRM_ITE_IT6505 + tristate "ITE IT6505 DisplayPort bridge" + depends on OF + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HDCP_HELPER + select DRM_DISPLAY_HELPER + select DRM_DISPLAY_DP_AUX_BUS + select DRM_KMS_HELPER + select EXTCON + select CRYPTO_LIB_SHA1 + select REGMAP_I2C + help + ITE IT6505 DisplayPort bridge chip driver. + +config DRM_LONTIUM_LT8912B + tristate "Lontium LT8912B DSI/HDMI bridge" + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select REGMAP_I2C + select VIDEOMODE_HELPERS + help + Driver for Lontium LT8912B DSI to HDMI bridge + chip driver. + Please say Y if you have such hardware. + + Say M here if you want to support this hardware as a module. + The module will be named "lontium-lt8912b". + +config DRM_LONTIUM_LT9211 + tristate "Lontium LT9211 DSI/LVDS/DPI bridge" + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select REGMAP_I2C + help + Driver for Lontium LT9211 Single/Dual-Link DSI/LVDS or Single DPI + input to Single-link/Dual-Link DSI/LVDS or Single DPI output bridge + chip. + Please say Y if you have such hardware. + +config DRM_LONTIUM_LT9611 + tristate "Lontium LT9611 DSI/HDMI bridge" + select SND_SOC_HDMI_CODEC if SND_SOC + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select DRM_DISPLAY_HELPER + select DRM_DISPLAY_HDMI_STATE_HELPER + select REGMAP_I2C + help + Driver for Lontium LT9611 DSI to HDMI bridge + chip driver that converts dual DSI and I2S to + HDMI signals + Please say Y if you have such hardware. + +config DRM_LONTIUM_LT9611UXC + tristate "Lontium LT9611UXC DSI/HDMI bridge" + select SND_SOC_HDMI_CODEC if SND_SOC + depends on OF + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select REGMAP_I2C + help + Driver for Lontium LT9611UXC DSI to HDMI bridge + chip driver that converts dual DSI and I2S to + HDMI signals + Please say Y if you have such hardware. + +config DRM_ITE_IT66121 + tristate "ITE IT66121 HDMI bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + help + Support for ITE IT66121 HDMI bridge. + config DRM_LVDS_CODEC tristate "Transparent LVDS encoders and decoders support" depends on OF @@ -68,6 +212,13 @@ config DRM_MEGACHIPS_STDPXXXX_GE_B850V3_FW to DP++. This is used with the i.MX6 imx-ldb driver. You are likely to say N here. +config DRM_MICROCHIP_LVDS_SERIALIZER + tristate "Microchip LVDS serializer support" + depends on OF + depends on DRM_ATMEL_HLCDC + help + Support for Microchip's LVDS serializer. + config DRM_NWL_MIPI_DSI tristate "Northwest Logic MIPI DSI Host controller" depends on DRM @@ -76,6 +227,7 @@ config DRM_NWL_MIPI_DSI select DRM_KMS_HELPER select DRM_MIPI_DSI select DRM_PANEL_BRIDGE + select GENERIC_PHY select GENERIC_PHY_MIPI_DPHY select MFD_SYSCON select MULTIPLEXER @@ -104,6 +256,9 @@ config DRM_PARADE_PS8622 config DRM_PARADE_PS8640 tristate "Parade PS8640 MIPI DSI to eDP Converter" depends on OF + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_DISPLAY_DP_AUX_BUS select DRM_KMS_HELPER select DRM_MIPI_DSI select DRM_PANEL @@ -112,11 +267,25 @@ config DRM_PARADE_PS8640 The PS8640 is a high-performance and low-power MIPI DSI to eDP converter +config DRM_SAMSUNG_DSIM + tristate "Samsung MIPI DSIM bridge driver" + depends on COMMON_CLK + depends on OF && HAS_IOMEM + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select DRM_PANEL_BRIDGE + select GENERIC_PHY + select GENERIC_PHY_MIPI_DPHY + help + The Samsung MIPI DSIM bridge controller driver. + This MIPI DSIM bridge can be found it on Exynos SoCs and + NXP's i.MX8M Mini/Nano. + config DRM_SIL_SII8620 tristate "Silicon Image SII8620 HDMI/MHL bridge" depends on OF select DRM_KMS_HELPER - imply EXTCON + select EXTCON depends on RC_CORE || !RC_CORE help Silicon Image SII8620 HDMI/MHL bridge chip driver. @@ -147,12 +316,34 @@ config DRM_SIMPLE_BRIDGE Support for non-programmable DRM bridges, such as ADI ADV7123, TI THS8134 and THS8135 or passive resistor ladder DACs. +config DRM_SOLOMON_SSD2825 + tristate "SSD2825 RGB/DSI bridge" + depends on SPI_MASTER && OF + select DRM_MIPI_DSI + select DRM_KMS_HELPER + select DRM_PANEL + help + Say Y here if you want support for the Solomon SSD2825 RGB/DSI + SPI bridge driver. + + Say M here if you want to support this hardware as a module. + The module will be named "ssd2825". + config DRM_THINE_THC63LVD1024 tristate "Thine THC63LVD1024 LVDS decoder bridge" depends on OF help Thine THC63LVD1024 LVDS/parallel converter driver. +config DRM_TOSHIBA_TC358762 + tristate "TC358762 DSI/DPI bridge" + depends on OF + select DRM_MIPI_DSI + select DRM_KMS_HELPER + select DRM_PANEL_BRIDGE + help + Toshiba TC358762 DSI/DPI bridge driver. + config DRM_TOSHIBA_TC358764 tristate "TC358764 DSI/LVDS bridge" depends on OF @@ -165,8 +356,11 @@ config DRM_TOSHIBA_TC358764 config DRM_TOSHIBA_TC358767 tristate "Toshiba TC358767 eDP bridge" depends on OF + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER select DRM_KMS_HELPER select REGMAP_I2C + select DRM_MIPI_DSI select DRM_PANEL help Toshiba TC358767 eDP bridge chip driver. @@ -178,9 +372,45 @@ config DRM_TOSHIBA_TC358768 select REGMAP_I2C select DRM_PANEL select DRM_MIPI_DSI + select VIDEOMODE_HELPERS help Toshiba TC358768AXBG/TC358778XBG DSI bridge chip driver. +config DRM_TOSHIBA_TC358775 + tristate "Toshiba TC358775 DSI/LVDS bridge" + depends on OF + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_PANEL + select DRM_MIPI_DSI + help + Toshiba TC358775 DSI/LVDS bridge chip driver. + +config DRM_TI_DLPC3433 + tristate "TI DLPC3433 Display controller" + depends on DRM && DRM_PANEL + depends on OF + select DRM_MIPI_DSI + help + TI DLPC3433 is a MIPI DSI based display controller bridge + for processing high resolution DMD based projectors. + + It has a flexible configuration of MIPI DSI and DPI signal + input that produces a DMD output in RGB565, RGB666, RGB888 + formats. + + It supports up to 720p resolution with 60 and 120 Hz refresh + rates. + +config DRM_TI_TDP158 + tristate "TI TDP158 HDMI/TMDS bridge" + depends on OF + select DRM_PANEL_BRIDGE + help + Texas Instruments TDP158 HDMI/TMDS Bridge driver + config DRM_TI_TFP410 tristate "TI TFP410 DVI/HDMI bridge" depends on OF @@ -188,13 +418,28 @@ config DRM_TI_TFP410 help Texas Instruments TFP410 DVI/HDMI Transmitter driver +config DRM_TI_SN65DSI83 + tristate "TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge" + depends on OF + select DRM_KMS_HELPER + select REGMAP_I2C + select DRM_PANEL + select DRM_MIPI_DSI + help + Texas Instruments SN65DSI83 and SN65DSI84 DSI to LVDS Bridge driver + config DRM_TI_SN65DSI86 tristate "TI SN65DSI86 DSI to eDP bridge" depends on OF + select DRM_DISPLAY_DP_HELPER + select DRM_DISPLAY_HELPER + select DRM_BRIDGE_CONNECTOR select DRM_KMS_HELPER select REGMAP_I2C select DRM_PANEL select DRM_MIPI_DSI + select AUXILIARY_BUS + select DRM_DISPLAY_DP_AUX_BUS help Texas Instruments SN65DSI86 DSI to eDP Bridge driver @@ -206,10 +451,26 @@ config DRM_TI_TPD12S015 Texas Instruments TPD12S015 HDMI level shifter and ESD protection driver. +config DRM_WAVESHARE_BRIDGE + tristate "Waveshare DSI bridge" + depends on OF + depends on BACKLIGHT_CLASS_DEVICE + select DRM_PANEL_BRIDGE + select DRM_KMS_HELPER + select DRM_MIPI_DSI + select REGMAP_I2C + help + Driver for waveshare DSI to DPI bridge board. + Please say Y if you have such hardware + source "drivers/gpu/drm/bridge/analogix/Kconfig" source "drivers/gpu/drm/bridge/adv7511/Kconfig" +source "drivers/gpu/drm/bridge/cadence/Kconfig" + +source "drivers/gpu/drm/bridge/imx/Kconfig" + source "drivers/gpu/drm/bridge/synopsys/Kconfig" endmenu |