diff options
Diffstat (limited to 'drivers/gpu/drm/bridge/chipone-icn6211.c')
| -rw-r--r-- | drivers/gpu/drm/bridge/chipone-icn6211.c | 693 |
1 files changed, 612 insertions, 81 deletions
diff --git a/drivers/gpu/drm/bridge/chipone-icn6211.c b/drivers/gpu/drm/bridge/chipone-icn6211.c index a6151db95586..814713c5bea9 100644 --- a/drivers/gpu/drm/bridge/chipone-icn6211.c +++ b/drivers/gpu/drm/bridge/chipone-icn6211.c @@ -4,18 +4,41 @@ * Author: Jagan Teki <jagan@amarulasolutions.com> */ +#include <drm/drm_atomic_helper.h> #include <drm/drm_of.h> #include <drm/drm_print.h> #include <drm/drm_mipi_dsi.h> +#include <linux/bitfield.h> +#include <linux/bits.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> +#include <linux/i2c.h> +#include <linux/media-bus-format.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> +#include <linux/regmap.h> #include <linux/regulator/consumer.h> -#include <video/mipi_display.h> - +#define VENDOR_ID 0x00 +#define DEVICE_ID_H 0x01 +#define DEVICE_ID_L 0x02 +#define VERSION_ID 0x03 +#define FIRMWARE_VERSION 0x08 +#define CONFIG_FINISH 0x09 +#define PD_CTRL(n) (0x0a + ((n) & 0x3)) /* 0..3 */ +#define RST_CTRL(n) (0x0e + ((n) & 0x1)) /* 0..1 */ +#define SYS_CTRL(n) (0x10 + ((n) & 0x7)) /* 0..4 */ +#define SYS_CTRL_1_CLK_PHASE_MSK GENMASK(5, 4) +#define CLK_PHASE_0 0 +#define CLK_PHASE_1_4 1 +#define CLK_PHASE_1_2 2 +#define CLK_PHASE_3_4 3 +#define RGB_DRV(n) (0x18 + ((n) & 0x3)) /* 0..3 */ +#define RGB_DLY(n) (0x1c + ((n) & 0x1)) /* 0..1 */ +#define RGB_TEST_CTRL 0x1e +#define ATE_PLL_EN 0x1f #define HACTIVE_LI 0x20 #define VACTIVE_LI 0x21 #define VACTIVE_HACTIVE_HI 0x22 @@ -23,18 +46,186 @@ #define HSYNC_LI 0x24 #define HBP_LI 0x25 #define HFP_HSW_HBP_HI 0x26 +#define HFP_HSW_HBP_HI_HFP(n) (((n) & 0x300) >> 4) +#define HFP_HSW_HBP_HI_HS(n) (((n) & 0x300) >> 6) +#define HFP_HSW_HBP_HI_HBP(n) (((n) & 0x300) >> 8) #define VFP 0x27 #define VSYNC 0x28 #define VBP 0x29 +#define BIST_POL 0x2a +#define BIST_POL_BIST_MODE(n) (((n) & 0xf) << 4) +#define BIST_POL_BIST_GEN BIT(3) +#define BIST_POL_HSYNC_POL BIT(2) +#define BIST_POL_VSYNC_POL BIT(1) +#define BIST_POL_DE_POL BIT(0) +#define BIST_RED 0x2b +#define BIST_GREEN 0x2c +#define BIST_BLUE 0x2d +#define BIST_CHESS_X 0x2e +#define BIST_CHESS_Y 0x2f +#define BIST_CHESS_XY_H 0x30 +#define BIST_FRAME_TIME_L 0x31 +#define BIST_FRAME_TIME_H 0x32 +#define FIFO_MAX_ADDR_LOW 0x33 +#define SYNC_EVENT_DLY 0x34 +#define HSW_MIN 0x35 +#define HFP_MIN 0x36 +#define LOGIC_RST_NUM 0x37 +#define OSC_CTRL(n) (0x48 + ((n) & 0x7)) /* 0..5 */ +#define BG_CTRL 0x4e +#define LDO_PLL 0x4f +#define PLL_CTRL(n) (0x50 + ((n) & 0xf)) /* 0..15 */ +#define PLL_CTRL_6_EXTERNAL 0x90 +#define PLL_CTRL_6_MIPI_CLK 0x92 +#define PLL_CTRL_6_INTERNAL 0x93 +#define PLL_REM(n) (0x60 + ((n) & 0x3)) /* 0..2 */ +#define PLL_DIV(n) (0x63 + ((n) & 0x3)) /* 0..2 */ +#define PLL_FRAC(n) (0x66 + ((n) & 0x3)) /* 0..2 */ +#define PLL_INT(n) (0x69 + ((n) & 0x1)) /* 0..1 */ +#define PLL_REF_DIV 0x6b +#define PLL_REF_DIV_P(n) ((n) & 0xf) +#define PLL_REF_DIV_Pe BIT(4) +#define PLL_REF_DIV_S(n) (((n) & 0x7) << 5) +#define PLL_SSC_P(n) (0x6c + ((n) & 0x3)) /* 0..2 */ +#define PLL_SSC_STEP(n) (0x6f + ((n) & 0x3)) /* 0..2 */ +#define PLL_SSC_OFFSET(n) (0x72 + ((n) & 0x3)) /* 0..3 */ +#define GPIO_OEN 0x79 +#define MIPI_CFG_PW 0x7a +#define MIPI_CFG_PW_CONFIG_DSI 0xc1 +#define MIPI_CFG_PW_CONFIG_I2C 0x3e +#define GPIO_SEL(n) (0x7b + ((n) & 0x1)) /* 0..1 */ +#define IRQ_SEL 0x7d +#define DBG_SEL 0x7e +#define DBG_SIGNAL 0x7f +#define MIPI_ERR_VECTOR_L 0x80 +#define MIPI_ERR_VECTOR_H 0x81 +#define MIPI_ERR_VECTOR_EN_L 0x82 +#define MIPI_ERR_VECTOR_EN_H 0x83 +#define MIPI_MAX_SIZE_L 0x84 +#define MIPI_MAX_SIZE_H 0x85 +#define DSI_CTRL 0x86 +#define DSI_CTRL_UNKNOWN 0x28 +#define DSI_CTRL_DSI_LANES(n) ((n) & 0x3) +#define MIPI_PN_SWAP 0x87 +#define MIPI_PN_SWAP_CLK BIT(4) +#define MIPI_PN_SWAP_D(n) BIT((n) & 0x3) +#define MIPI_SOT_SYNC_BIT(n) (0x88 + ((n) & 0x1)) /* 0..1 */ +#define MIPI_ULPS_CTRL 0x8a +#define MIPI_CLK_CHK_VAR 0x8e +#define MIPI_CLK_CHK_INI 0x8f +#define MIPI_T_TERM_EN 0x90 +#define MIPI_T_HS_SETTLE 0x91 +#define MIPI_T_TA_SURE_PRE 0x92 +#define MIPI_T_LPX_SET 0x94 +#define MIPI_T_CLK_MISS 0x95 +#define MIPI_INIT_TIME_L 0x96 +#define MIPI_INIT_TIME_H 0x97 +#define MIPI_T_CLK_TERM_EN 0x99 +#define MIPI_T_CLK_SETTLE 0x9a +#define MIPI_TO_HS_RX_L 0x9e +#define MIPI_TO_HS_RX_H 0x9f +#define MIPI_PHY(n) (0xa0 + ((n) & 0x7)) /* 0..5 */ +#define MIPI_PD_RX 0xb0 +#define MIPI_PD_TERM 0xb1 +#define MIPI_PD_HSRX 0xb2 +#define MIPI_PD_LPTX 0xb3 +#define MIPI_PD_LPRX 0xb4 +#define MIPI_PD_CK_LANE 0xb5 +#define MIPI_FORCE_0 0xb6 +#define MIPI_RST_CTRL 0xb7 +#define MIPI_RST_NUM 0xb8 +#define MIPI_DBG_SET(n) (0xc0 + ((n) & 0xf)) /* 0..9 */ +#define MIPI_DBG_SEL 0xe0 +#define MIPI_DBG_DATA 0xe1 +#define MIPI_ATE_TEST_SEL 0xe2 +#define MIPI_ATE_STATUS(n) (0xe3 + ((n) & 0x1)) /* 0..1 */ struct chipone { struct device *dev; + struct regmap *regmap; + struct i2c_client *client; struct drm_bridge bridge; + struct drm_display_mode mode; struct drm_bridge *panel_bridge; + struct mipi_dsi_device *dsi; struct gpio_desc *enable_gpio; struct regulator *vdd1; struct regulator *vdd2; struct regulator *vdd3; + struct clk *refclk; + unsigned long refclk_rate; + bool interface_i2c; +}; + +static const struct regmap_range chipone_dsi_readable_ranges[] = { + regmap_reg_range(VENDOR_ID, VERSION_ID), + regmap_reg_range(FIRMWARE_VERSION, PLL_SSC_OFFSET(3)), + regmap_reg_range(GPIO_OEN, MIPI_ULPS_CTRL), + regmap_reg_range(MIPI_CLK_CHK_VAR, MIPI_T_TA_SURE_PRE), + regmap_reg_range(MIPI_T_LPX_SET, MIPI_INIT_TIME_H), + regmap_reg_range(MIPI_T_CLK_TERM_EN, MIPI_T_CLK_SETTLE), + regmap_reg_range(MIPI_TO_HS_RX_L, MIPI_PHY(5)), + regmap_reg_range(MIPI_PD_RX, MIPI_RST_NUM), + regmap_reg_range(MIPI_DBG_SET(0), MIPI_DBG_SET(9)), + regmap_reg_range(MIPI_DBG_SEL, MIPI_ATE_STATUS(1)), +}; + +static const struct regmap_access_table chipone_dsi_readable_table = { + .yes_ranges = chipone_dsi_readable_ranges, + .n_yes_ranges = ARRAY_SIZE(chipone_dsi_readable_ranges), +}; + +static const struct regmap_range chipone_dsi_writeable_ranges[] = { + regmap_reg_range(CONFIG_FINISH, PLL_SSC_OFFSET(3)), + regmap_reg_range(GPIO_OEN, MIPI_ULPS_CTRL), + regmap_reg_range(MIPI_CLK_CHK_VAR, MIPI_T_TA_SURE_PRE), + regmap_reg_range(MIPI_T_LPX_SET, MIPI_INIT_TIME_H), + regmap_reg_range(MIPI_T_CLK_TERM_EN, MIPI_T_CLK_SETTLE), + regmap_reg_range(MIPI_TO_HS_RX_L, MIPI_PHY(5)), + regmap_reg_range(MIPI_PD_RX, MIPI_RST_NUM), + regmap_reg_range(MIPI_DBG_SET(0), MIPI_DBG_SET(9)), + regmap_reg_range(MIPI_DBG_SEL, MIPI_ATE_STATUS(1)), +}; + +static const struct regmap_access_table chipone_dsi_writeable_table = { + .yes_ranges = chipone_dsi_writeable_ranges, + .n_yes_ranges = ARRAY_SIZE(chipone_dsi_writeable_ranges), +}; + +static const struct regmap_config chipone_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .rd_table = &chipone_dsi_readable_table, + .wr_table = &chipone_dsi_writeable_table, + .cache_type = REGCACHE_MAPLE, + .max_register = MIPI_ATE_STATUS(1), +}; + +static int chipone_dsi_read(void *context, + const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct mipi_dsi_device *dsi = context; + const u16 reg16 = (val_size << 8) | *(u8 *)reg; + int ret; + + ret = mipi_dsi_generic_read(dsi, ®16, 2, val, val_size); + + return ret == val_size ? 0 : -EINVAL; +} + +static int chipone_dsi_write(void *context, const void *data, size_t count) +{ + struct mipi_dsi_device *dsi = context; + + return mipi_dsi_generic_write(dsi, data, 2); +} + +static const struct regmap_bus chipone_dsi_regmap_bus = { + .read = chipone_dsi_read, + .write = chipone_dsi_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, + .val_format_endian_default = REGMAP_ENDIAN_NATIVE, }; static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge) @@ -42,79 +233,218 @@ static inline struct chipone *bridge_to_chipone(struct drm_bridge *bridge) return container_of(bridge, struct chipone, bridge); } -static struct drm_display_mode *bridge_to_mode(struct drm_bridge *bridge) +static void chipone_readb(struct chipone *icn, u8 reg, u8 *val) { - return &bridge->encoder->crtc->state->adjusted_mode; + int ret, pval; + + ret = regmap_read(icn->regmap, reg, &pval); + + *val = ret ? 0 : pval & 0xff; } -static inline int chipone_dsi_write(struct chipone *icn, const void *seq, - size_t len) +static int chipone_writeb(struct chipone *icn, u8 reg, u8 val) { - struct mipi_dsi_device *dsi = to_mipi_dsi_device(icn->dev); - - return mipi_dsi_generic_write(dsi, seq, len); + return regmap_write(icn->regmap, reg, val); } -#define ICN6211_DSI(icn, seq...) \ - { \ - const u8 d[] = { seq }; \ - chipone_dsi_write(icn, d, ARRAY_SIZE(d)); \ +static void chipone_configure_pll(struct chipone *icn, + const struct drm_display_mode *mode) +{ + unsigned int best_p = 0, best_m = 0, best_s = 0; + unsigned int mode_clock = mode->clock * 1000; + unsigned int delta, min_delta = 0xffffffff; + unsigned int freq_p, freq_s, freq_out; + unsigned int p_min, p_max; + unsigned int p, m, s; + unsigned int fin; + bool best_p_pot; + u8 ref_div; + + /* + * DSI byte clock frequency (input into PLL) is calculated as: + * DSI_CLK = HS clock / 4 + * + * DPI pixel clock frequency (output from PLL) is mode clock. + * + * The chip contains fractional PLL which works as follows: + * DPI_CLK = ((DSI_CLK / P) * M) / S + * P is pre-divider, register PLL_REF_DIV[3:0] is 1:n divider + * register PLL_REF_DIV[4] is extra 1:2 divider + * M is integer multiplier, register PLL_INT(0) is multiplier + * S is post-divider, register PLL_REF_DIV[7:5] is 2^(n+1) divider + * + * It seems the PLL input clock after applying P pre-divider have + * to be lower than 20 MHz. + */ + if (icn->refclk) + fin = icn->refclk_rate; + else + fin = icn->dsi->hs_rate / 4; /* in Hz */ + + /* Minimum value of P predivider for PLL input in 5..20 MHz */ + p_min = clamp(DIV_ROUND_UP(fin, 20000000), 1U, 31U); + p_max = clamp(fin / 5000000, 1U, 31U); + + for (p = p_min; p < p_max; p++) { /* PLL_REF_DIV[4,3:0] */ + if (p > 16 && p & 1) /* P > 16 uses extra /2 */ + continue; + freq_p = fin / p; + if (freq_p == 0) /* Divider too high */ + break; + + for (s = 0; s < 0x7; s++) { /* PLL_REF_DIV[7:5] */ + freq_s = freq_p / BIT(s + 1); + if (freq_s == 0) /* Divider too high */ + break; + + m = mode_clock / freq_s; + + /* Multiplier is 8 bit */ + if (m > 0xff) + continue; + + /* Limit PLL VCO frequency to 1 GHz */ + freq_out = (fin * m) / p; + if (freq_out > 1000000000) + continue; + + /* Apply post-divider */ + freq_out /= BIT(s + 1); + + delta = abs(mode_clock - freq_out); + if (delta < min_delta) { + best_p = p; + best_m = m; + best_s = s; + min_delta = delta; + } + } } -static void chipone_enable(struct drm_bridge *bridge) + best_p_pot = !(best_p & 1); + + dev_dbg(icn->dev, + "PLL: P[3:0]=%d P[4]=2*%d M=%d S[7:5]=2^%d delta=%d => DSI f_in(%s)=%d Hz ; DPI f_out=%d Hz\n", + best_p >> best_p_pot, best_p_pot, best_m, best_s + 1, + min_delta, icn->refclk ? "EXT" : "DSI", fin, + (fin * best_m) / (best_p << (best_s + 1))); + + ref_div = PLL_REF_DIV_P(best_p >> best_p_pot) | PLL_REF_DIV_S(best_s); + if (best_p_pot) /* Prefer /2 pre-divider */ + ref_div |= PLL_REF_DIV_Pe; + + /* Clock source selection either external clock or MIPI DSI clock lane */ + chipone_writeb(icn, PLL_CTRL(6), + icn->refclk ? PLL_CTRL_6_EXTERNAL : PLL_CTRL_6_MIPI_CLK); + chipone_writeb(icn, PLL_REF_DIV, ref_div); + chipone_writeb(icn, PLL_INT(0), best_m); +} + +static void chipone_atomic_enable(struct drm_bridge *bridge, + struct drm_atomic_state *state) { struct chipone *icn = bridge_to_chipone(bridge); - struct drm_display_mode *mode = bridge_to_mode(bridge); + struct drm_display_mode *mode = &icn->mode; + const struct drm_bridge_state *bridge_state; + u16 hfp, hbp, hsync; + u32 bus_flags; + u8 pol, sys_ctrl_1, id[4]; + + chipone_readb(icn, VENDOR_ID, id); + chipone_readb(icn, DEVICE_ID_H, id + 1); + chipone_readb(icn, DEVICE_ID_L, id + 2); + chipone_readb(icn, VERSION_ID, id + 3); + + dev_dbg(icn->dev, + "Chip IDs: Vendor=0x%02x Device=0x%02x:0x%02x Version=0x%02x\n", + id[0], id[1], id[2], id[3]); + + if (id[0] != 0xc1 || id[1] != 0x62 || id[2] != 0x11) { + dev_dbg(icn->dev, "Invalid Chip IDs, aborting configuration\n"); + return; + } + + /* Get the DPI flags from the bridge state. */ + bridge_state = drm_atomic_get_new_bridge_state(state, bridge); + bus_flags = bridge_state->output_bus_cfg.flags; - ICN6211_DSI(icn, 0x7a, 0xc1); + if (icn->interface_i2c) + chipone_writeb(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_I2C); + else + chipone_writeb(icn, MIPI_CFG_PW, MIPI_CFG_PW_CONFIG_DSI); - ICN6211_DSI(icn, HACTIVE_LI, mode->hdisplay & 0xff); + chipone_writeb(icn, HACTIVE_LI, mode->hdisplay & 0xff); - ICN6211_DSI(icn, VACTIVE_LI, mode->vdisplay & 0xff); + chipone_writeb(icn, VACTIVE_LI, mode->vdisplay & 0xff); - /** + /* * lsb nibble: 2nd nibble of hdisplay * msb nibble: 2nd nibble of vdisplay */ - ICN6211_DSI(icn, VACTIVE_HACTIVE_HI, - ((mode->hdisplay >> 8) & 0xf) | - (((mode->vdisplay >> 8) & 0xf) << 4)); + chipone_writeb(icn, VACTIVE_HACTIVE_HI, + ((mode->hdisplay >> 8) & 0xf) | + (((mode->vdisplay >> 8) & 0xf) << 4)); - ICN6211_DSI(icn, HFP_LI, mode->hsync_start - mode->hdisplay); + hfp = mode->hsync_start - mode->hdisplay; + hsync = mode->hsync_end - mode->hsync_start; + hbp = mode->htotal - mode->hsync_end; - ICN6211_DSI(icn, HSYNC_LI, mode->hsync_end - mode->hsync_start); + chipone_writeb(icn, HFP_LI, hfp & 0xff); + chipone_writeb(icn, HSYNC_LI, hsync & 0xff); + chipone_writeb(icn, HBP_LI, hbp & 0xff); + /* Top two bits of Horizontal Front porch/Sync/Back porch */ + chipone_writeb(icn, HFP_HSW_HBP_HI, + HFP_HSW_HBP_HI_HFP(hfp) | + HFP_HSW_HBP_HI_HS(hsync) | + HFP_HSW_HBP_HI_HBP(hbp)); - ICN6211_DSI(icn, HBP_LI, mode->htotal - mode->hsync_end); + chipone_writeb(icn, VFP, mode->vsync_start - mode->vdisplay); - ICN6211_DSI(icn, HFP_HSW_HBP_HI, 0x00); + chipone_writeb(icn, VSYNC, mode->vsync_end - mode->vsync_start); - ICN6211_DSI(icn, VFP, mode->vsync_start - mode->vdisplay); + chipone_writeb(icn, VBP, mode->vtotal - mode->vsync_end); - ICN6211_DSI(icn, VSYNC, mode->vsync_end - mode->vsync_start); + /* dsi specific sequence */ + chipone_writeb(icn, SYNC_EVENT_DLY, 0x80); + chipone_writeb(icn, HFP_MIN, hfp & 0xff); - ICN6211_DSI(icn, VBP, mode->vtotal - mode->vsync_end); + /* DSI data lane count */ + chipone_writeb(icn, DSI_CTRL, + DSI_CTRL_UNKNOWN | DSI_CTRL_DSI_LANES(icn->dsi->lanes - 1)); - /* dsi specific sequence */ - ICN6211_DSI(icn, MIPI_DCS_SET_TEAR_OFF, 0x80); - ICN6211_DSI(icn, MIPI_DCS_SET_ADDRESS_MODE, 0x28); - ICN6211_DSI(icn, 0xb5, 0xa0); - ICN6211_DSI(icn, 0x5c, 0xff); - ICN6211_DSI(icn, MIPI_DCS_SET_COLUMN_ADDRESS, 0x01); - ICN6211_DSI(icn, MIPI_DCS_GET_POWER_SAVE, 0x92); - ICN6211_DSI(icn, 0x6b, 0x71); - ICN6211_DSI(icn, 0x69, 0x2b); - ICN6211_DSI(icn, MIPI_DCS_ENTER_SLEEP_MODE, 0x40); - ICN6211_DSI(icn, MIPI_DCS_EXIT_SLEEP_MODE, 0x98); + chipone_writeb(icn, MIPI_PD_CK_LANE, 0xa0); + chipone_writeb(icn, PLL_CTRL(12), 0xff); + chipone_writeb(icn, MIPI_PN_SWAP, 0x00); + + /* DPI HS/VS/DE polarity */ + pol = ((mode->flags & DRM_MODE_FLAG_PHSYNC) ? BIST_POL_HSYNC_POL : 0) | + ((mode->flags & DRM_MODE_FLAG_PVSYNC) ? BIST_POL_VSYNC_POL : 0) | + ((bus_flags & DRM_BUS_FLAG_DE_HIGH) ? BIST_POL_DE_POL : 0); + chipone_writeb(icn, BIST_POL, pol); + + /* Configure PLL settings */ + chipone_configure_pll(icn, mode); + + chipone_writeb(icn, SYS_CTRL(0), 0x40); + sys_ctrl_1 = 0x88; + + if (bus_flags & DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE) + sys_ctrl_1 |= FIELD_PREP(SYS_CTRL_1_CLK_PHASE_MSK, CLK_PHASE_0); + else + sys_ctrl_1 |= FIELD_PREP(SYS_CTRL_1_CLK_PHASE_MSK, CLK_PHASE_1_2); + + chipone_writeb(icn, SYS_CTRL(1), sys_ctrl_1); /* icn6211 specific sequence */ - ICN6211_DSI(icn, 0xb6, 0x20); - ICN6211_DSI(icn, 0x51, 0x20); - ICN6211_DSI(icn, 0x09, 0x10); + chipone_writeb(icn, MIPI_FORCE_0, 0x20); + chipone_writeb(icn, PLL_CTRL(1), 0x20); + chipone_writeb(icn, CONFIG_FINISH, 0x10); usleep_range(10000, 11000); } -static void chipone_pre_enable(struct drm_bridge *bridge) +static void chipone_atomic_pre_enable(struct drm_bridge *bridge, + struct drm_atomic_state *state) { struct chipone *icn = bridge_to_chipone(bridge); int ret; @@ -140,15 +470,23 @@ static void chipone_pre_enable(struct drm_bridge *bridge) "failed to enable VDD3 regulator: %d\n", ret); } + ret = clk_prepare_enable(icn->refclk); + if (ret) + DRM_DEV_ERROR(icn->dev, + "failed to enable RECLK clock: %d\n", ret); + gpiod_set_value(icn->enable_gpio, 1); usleep_range(10000, 11000); } -static void chipone_post_disable(struct drm_bridge *bridge) +static void chipone_atomic_post_disable(struct drm_bridge *bridge, + struct drm_atomic_state *state) { struct chipone *icn = bridge_to_chipone(bridge); + clk_disable_unprepare(icn->refclk); + if (icn->vdd1) regulator_disable(icn->vdd1); @@ -161,26 +499,153 @@ static void chipone_post_disable(struct drm_bridge *bridge) gpiod_set_value(icn->enable_gpio, 0); } -static int chipone_attach(struct drm_bridge *bridge, enum drm_bridge_attach_flags flags) +static void chipone_mode_set(struct drm_bridge *bridge, + const struct drm_display_mode *mode, + const struct drm_display_mode *adjusted_mode) { struct chipone *icn = bridge_to_chipone(bridge); - return drm_bridge_attach(bridge->encoder, icn->panel_bridge, bridge, flags); + drm_mode_copy(&icn->mode, adjusted_mode); +}; + +static int chipone_dsi_attach(struct chipone *icn) +{ + struct mipi_dsi_device *dsi = icn->dsi; + struct device *dev = icn->dev; + int dsi_lanes, ret; + + dsi_lanes = drm_of_get_data_lanes_count_ep(dev->of_node, 0, 0, 1, 4); + + /* + * If the 'data-lanes' property does not exist in DT or is invalid, + * default to previously hard-coded behavior, which was 4 data lanes. + */ + if (dsi_lanes < 0) + icn->dsi->lanes = 4; + else + icn->dsi->lanes = dsi_lanes; + + dsi->format = MIPI_DSI_FMT_RGB888; + dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET; + dsi->hs_rate = 500000000; + dsi->lp_rate = 16000000; + + ret = mipi_dsi_attach(dsi); + if (ret < 0) + dev_err(icn->dev, "failed to attach dsi\n"); + + return ret; +} + +static int chipone_dsi_host_attach(struct chipone *icn) +{ + struct device *dev = icn->dev; + struct device_node *host_node; + struct device_node *endpoint; + struct mipi_dsi_device *dsi; + struct mipi_dsi_host *host; + int ret = 0; + + const struct mipi_dsi_device_info info = { + .type = "chipone", + .channel = 0, + .node = NULL, + }; + + endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, 0); + host_node = of_graph_get_remote_port_parent(endpoint); + of_node_put(endpoint); + + if (!host_node) + return -EINVAL; + + host = of_find_mipi_dsi_host_by_node(host_node); + of_node_put(host_node); + if (!host) + return dev_err_probe(dev, -EPROBE_DEFER, "failed to find dsi host\n"); + + dsi = mipi_dsi_device_register_full(host, &info); + if (IS_ERR(dsi)) { + return dev_err_probe(dev, PTR_ERR(dsi), + "failed to create dsi device\n"); + } + + icn->dsi = dsi; + + ret = chipone_dsi_attach(icn); + if (ret < 0) + mipi_dsi_device_unregister(dsi); + + return ret; +} + +static int chipone_attach(struct drm_bridge *bridge, + struct drm_encoder *encoder, + enum drm_bridge_attach_flags flags) +{ + struct chipone *icn = bridge_to_chipone(bridge); + + return drm_bridge_attach(encoder, icn->panel_bridge, bridge, flags); +} + +#define MAX_INPUT_SEL_FORMATS 1 + +static u32 * +chipone_atomic_get_input_bus_fmts(struct drm_bridge *bridge, + struct drm_bridge_state *bridge_state, + struct drm_crtc_state *crtc_state, + struct drm_connector_state *conn_state, + u32 output_fmt, + unsigned int *num_input_fmts) +{ + u32 *input_fmts; + + *num_input_fmts = 0; + + input_fmts = kcalloc(MAX_INPUT_SEL_FORMATS, sizeof(*input_fmts), + GFP_KERNEL); + if (!input_fmts) + return NULL; + + /* This is the DSI-end bus format */ + input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24; + *num_input_fmts = 1; + + return input_fmts; } static const struct drm_bridge_funcs chipone_bridge_funcs = { - .attach = chipone_attach, - .post_disable = chipone_post_disable, - .pre_enable = chipone_pre_enable, - .enable = chipone_enable, + .atomic_duplicate_state = drm_atomic_helper_bridge_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_bridge_destroy_state, + .atomic_reset = drm_atomic_helper_bridge_reset, + .atomic_pre_enable = chipone_atomic_pre_enable, + .atomic_enable = chipone_atomic_enable, + .atomic_post_disable = chipone_atomic_post_disable, + .mode_set = chipone_mode_set, + .attach = chipone_attach, + .atomic_get_input_bus_fmts = chipone_atomic_get_input_bus_fmts, }; static int chipone_parse_dt(struct chipone *icn) { struct device *dev = icn->dev; - struct drm_panel *panel; int ret; + icn->refclk = devm_clk_get_optional(dev, "refclk"); + if (IS_ERR(icn->refclk)) { + ret = PTR_ERR(icn->refclk); + DRM_DEV_ERROR(dev, "failed to get REFCLK clock: %d\n", ret); + return ret; + } else if (icn->refclk) { + icn->refclk_rate = clk_get_rate(icn->refclk); + if (icn->refclk_rate < 10000000 || icn->refclk_rate > 154000000) { + DRM_DEV_ERROR(dev, "REFCLK out of range: %ld Hz\n", + icn->refclk_rate); + return -EINVAL; + } + } + icn->vdd1 = devm_regulator_get_optional(dev, "vdd1"); if (IS_ERR(icn->vdd1)) { ret = PTR_ERR(icn->vdd1); @@ -214,61 +679,96 @@ static int chipone_parse_dt(struct chipone *icn) return PTR_ERR(icn->enable_gpio); } - ret = drm_of_find_panel_or_bridge(dev->of_node, 1, 0, &panel, NULL); - if (ret) - return ret; - - icn->panel_bridge = devm_drm_panel_bridge_add(dev, panel); + icn->panel_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 1, 0); if (IS_ERR(icn->panel_bridge)) return PTR_ERR(icn->panel_bridge); return 0; } -static int chipone_probe(struct mipi_dsi_device *dsi) +static int chipone_common_probe(struct device *dev, struct chipone **icnr) { - struct device *dev = &dsi->dev; struct chipone *icn; int ret; - icn = devm_kzalloc(dev, sizeof(struct chipone), GFP_KERNEL); - if (!icn) - return -ENOMEM; + icn = devm_drm_bridge_alloc(dev, struct chipone, bridge, + &chipone_bridge_funcs); + if (IS_ERR(icn)) + return PTR_ERR(icn); - mipi_dsi_set_drvdata(dsi, icn); icn->dev = dev; ret = chipone_parse_dt(icn); if (ret) return ret; - icn->bridge.funcs = &chipone_bridge_funcs; icn->bridge.type = DRM_MODE_CONNECTOR_DPI; icn->bridge.of_node = dev->of_node; - drm_bridge_add(&icn->bridge); + *icnr = icn; - dsi->lanes = 4; - dsi->format = MIPI_DSI_FMT_RGB888; - dsi->mode_flags = MIPI_DSI_MODE_VIDEO_SYNC_PULSE; + return ret; +} - ret = mipi_dsi_attach(dsi); - if (ret < 0) { +static int chipone_dsi_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct chipone *icn; + int ret; + + ret = chipone_common_probe(dev, &icn); + if (ret) + return ret; + + icn->regmap = devm_regmap_init(dev, &chipone_dsi_regmap_bus, + dsi, &chipone_regmap_config); + if (IS_ERR(icn->regmap)) + return PTR_ERR(icn->regmap); + + icn->interface_i2c = false; + icn->dsi = dsi; + + mipi_dsi_set_drvdata(dsi, icn); + + drm_bridge_add(&icn->bridge); + + ret = chipone_dsi_attach(icn); + if (ret) drm_bridge_remove(&icn->bridge); - dev_err(dev, "failed to attach dsi\n"); - } return ret; } -static int chipone_remove(struct mipi_dsi_device *dsi) +static int chipone_i2c_probe(struct i2c_client *client) +{ + struct device *dev = &client->dev; + struct chipone *icn; + int ret; + + ret = chipone_common_probe(dev, &icn); + if (ret) + return ret; + + icn->regmap = devm_regmap_init_i2c(client, &chipone_regmap_config); + if (IS_ERR(icn->regmap)) + return PTR_ERR(icn->regmap); + + icn->interface_i2c = true; + icn->client = client; + dev_set_drvdata(dev, icn); + i2c_set_clientdata(client, icn); + + drm_bridge_add(&icn->bridge); + + return chipone_dsi_host_attach(icn); +} + +static void chipone_dsi_remove(struct mipi_dsi_device *dsi) { struct chipone *icn = mipi_dsi_get_drvdata(dsi); mipi_dsi_detach(dsi); drm_bridge_remove(&icn->bridge); - - return 0; } static const struct of_device_id chipone_of_match[] = { @@ -277,16 +777,47 @@ static const struct of_device_id chipone_of_match[] = { }; MODULE_DEVICE_TABLE(of, chipone_of_match); -static struct mipi_dsi_driver chipone_driver = { - .probe = chipone_probe, - .remove = chipone_remove, +static struct mipi_dsi_driver chipone_dsi_driver = { + .probe = chipone_dsi_probe, + .remove = chipone_dsi_remove, .driver = { .name = "chipone-icn6211", - .owner = THIS_MODULE, .of_match_table = chipone_of_match, }, }; -module_mipi_dsi_driver(chipone_driver); + +static const struct i2c_device_id chipone_i2c_id[] = { + { "chipone,icn6211" }, + {}, +}; +MODULE_DEVICE_TABLE(i2c, chipone_i2c_id); + +static struct i2c_driver chipone_i2c_driver = { + .probe = chipone_i2c_probe, + .id_table = chipone_i2c_id, + .driver = { + .name = "chipone-icn6211-i2c", + .of_match_table = chipone_of_match, + }, +}; + +static int __init chipone_init(void) +{ + if (IS_ENABLED(CONFIG_DRM_MIPI_DSI)) + mipi_dsi_driver_register(&chipone_dsi_driver); + + return i2c_add_driver(&chipone_i2c_driver); +} +module_init(chipone_init); + +static void __exit chipone_exit(void) +{ + i2c_del_driver(&chipone_i2c_driver); + + if (IS_ENABLED(CONFIG_DRM_MIPI_DSI)) + mipi_dsi_driver_unregister(&chipone_dsi_driver); +} +module_exit(chipone_exit); MODULE_AUTHOR("Jagan Teki <jagan@amarulasolutions.com>"); MODULE_DESCRIPTION("Chipone ICN6211 MIPI-DSI to RGB Converter Bridge"); |