summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/bridge/lontium-lt8912b.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpu/drm/bridge/lontium-lt8912b.c')
-rw-r--r--drivers/gpu/drm/bridge/lontium-lt8912b.c248
1 files changed, 165 insertions, 83 deletions
diff --git a/drivers/gpu/drm/bridge/lontium-lt8912b.c b/drivers/gpu/drm/bridge/lontium-lt8912b.c
index c642d1e02b2f..342374cb8fc6 100644
--- a/drivers/gpu/drm/bridge/lontium-lt8912b.c
+++ b/drivers/gpu/drm/bridge/lontium-lt8912b.c
@@ -7,10 +7,12 @@
#include <linux/delay.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
+#include <linux/media-bus-format.h>
#include <linux/regmap.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_atomic_helper.h>
+#include <drm/drm_edid.h>
#include <drm/drm_mipi_dsi.h>
#include <drm/drm_of.h>
@@ -41,9 +43,10 @@ struct lt8912 {
struct videomode mode;
+ struct regulator_bulk_data supplies[7];
+
u8 data_lanes;
bool is_power_on;
- bool is_attached;
};
static int lt8912_write_init_config(struct lt8912 *lt)
@@ -163,30 +166,38 @@ static int lt8912_write_rxlogicres_config(struct lt8912 *lt)
return ret;
};
+/* enable LVDS output with some hardcoded configuration, not required for the HDMI output */
static int lt8912_write_lvds_config(struct lt8912 *lt)
{
const struct reg_sequence seq[] = {
+ // lvds power up
{0x44, 0x30},
{0x51, 0x05},
- {0x50, 0x24},
- {0x51, 0x2d},
- {0x52, 0x04},
- {0x69, 0x0e},
+
+ // core pll bypass
+ {0x50, 0x24}, // cp=50uA
+ {0x51, 0x2d}, // Pix_clk as reference, second order passive LPF PLL
+ {0x52, 0x04}, // loopdiv=0, use second-order PLL
+ {0x69, 0x0e}, // CP_PRESET_DIV_RATIO
{0x69, 0x8e},
{0x6a, 0x00},
- {0x6c, 0xb8},
+ {0x6c, 0xb8}, // RGD_CP_SOFT_K_EN,RGD_CP_SOFT_K[13:8]
{0x6b, 0x51},
- {0x04, 0xfb},
+
+ {0x04, 0xfb}, // core pll reset
{0x04, 0xff},
- {0x7f, 0x00},
- {0xa8, 0x13},
- {0x02, 0xf7},
+
+ // scaler bypass
+ {0x7f, 0x00}, // disable scaler
+ {0xa8, 0x13}, // 0x13: JEIDA, 0x33: VESA
+
+ {0x02, 0xf7}, // lvds pll reset
{0x02, 0xff},
{0x03, 0xcf},
{0x03, 0xff},
};
- return regmap_multi_reg_write(lt->regmap[I2C_CEC_DSI], seq, ARRAY_SIZE(seq));
+ return regmap_multi_reg_write(lt->regmap[I2C_MAIN], seq, ARRAY_SIZE(seq));
};
static inline struct lt8912 *bridge_to_lt8912(struct drm_bridge *b)
@@ -248,6 +259,12 @@ static int lt8912_free_i2c(struct lt8912 *lt)
static int lt8912_hard_power_on(struct lt8912 *lt)
{
+ int ret;
+
+ ret = regulator_bulk_enable(ARRAY_SIZE(lt->supplies), lt->supplies);
+ if (ret)
+ return ret;
+
gpiod_set_value_cansleep(lt->gp_reset, 0);
msleep(20);
@@ -258,6 +275,9 @@ static void lt8912_hard_power_off(struct lt8912 *lt)
{
gpiod_set_value_cansleep(lt->gp_reset, 1);
msleep(20);
+
+ regulator_bulk_disable(ARRAY_SIZE(lt->supplies), lt->supplies);
+
lt->is_power_on = false;
}
@@ -266,7 +286,7 @@ static int lt8912_video_setup(struct lt8912 *lt)
u32 hactive, h_total, hpw, hfp, hbp;
u32 vactive, v_total, vpw, vfp, vbp;
u8 settle = 0x08;
- int ret;
+ int ret, hsync_activehigh, vsync_activehigh;
if (!lt)
return -EINVAL;
@@ -276,12 +296,14 @@ static int lt8912_video_setup(struct lt8912 *lt)
hpw = lt->mode.hsync_len;
hbp = lt->mode.hback_porch;
h_total = hactive + hfp + hpw + hbp;
+ hsync_activehigh = lt->mode.flags & DISPLAY_FLAGS_HSYNC_HIGH;
vactive = lt->mode.vactive;
vfp = lt->mode.vfront_porch;
vpw = lt->mode.vsync_len;
vbp = lt->mode.vback_porch;
v_total = vactive + vfp + vpw + vbp;
+ vsync_activehigh = lt->mode.flags & DISPLAY_FLAGS_VSYNC_HIGH;
if (vactive <= 600)
settle = 0x04;
@@ -315,6 +337,13 @@ static int lt8912_video_setup(struct lt8912 *lt)
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x3e, hfp & 0xff);
ret |= regmap_write(lt->regmap[I2C_CEC_DSI], 0x3f, hfp >> 8);
+ ret |= regmap_update_bits(lt->regmap[I2C_MAIN], 0xab, BIT(0),
+ vsync_activehigh ? BIT(0) : 0);
+ ret |= regmap_update_bits(lt->regmap[I2C_MAIN], 0xab, BIT(1),
+ hsync_activehigh ? BIT(1) : 0);
+ ret |= regmap_update_bits(lt->regmap[I2C_MAIN], 0xb2, BIT(0),
+ lt->connector.display_info.is_hdmi ? BIT(0) : 0);
+
return ret;
}
@@ -379,7 +408,7 @@ lt8912_connector_detect(struct drm_connector *connector, bool force)
struct lt8912 *lt = connector_to_lt8912(connector);
if (lt->hdmi_port->ops & DRM_BRIDGE_OP_DETECT)
- return drm_bridge_detect(lt->hdmi_port);
+ return drm_bridge_detect(lt->hdmi_port, connector);
return lt8912_check_cable_status(lt);
}
@@ -393,50 +422,31 @@ static const struct drm_connector_funcs lt8912_connector_funcs = {
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
-static enum drm_mode_status
-lt8912_connector_mode_valid(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- if (mode->clock > 150000)
- return MODE_CLOCK_HIGH;
-
- if (mode->hdisplay > 1920)
- return MODE_BAD_HVALUE;
-
- if (mode->vdisplay > 1080)
- return MODE_BAD_VVALUE;
-
- return MODE_OK;
-}
-
static int lt8912_connector_get_modes(struct drm_connector *connector)
{
- struct edid *edid;
- int ret = -1;
- int num = 0;
+ const struct drm_edid *drm_edid;
struct lt8912 *lt = connector_to_lt8912(connector);
u32 bus_format = MEDIA_BUS_FMT_RGB888_1X24;
+ int ret, num;
- edid = drm_bridge_get_edid(lt->hdmi_port, connector);
- if (edid) {
- drm_connector_update_edid_property(connector, edid);
- num = drm_add_edid_modes(connector, edid);
- } else {
- return ret;
- }
+ drm_edid = drm_bridge_edid_read(lt->hdmi_port, connector);
+ drm_edid_connector_update(connector, drm_edid);
+ if (!drm_edid)
+ return 0;
+
+ num = drm_edid_connector_add_modes(connector);
ret = drm_display_info_set_bus_formats(&connector->display_info,
&bus_format, 1);
- if (ret)
- num = ret;
+ if (ret < 0)
+ num = 0;
- kfree(edid);
+ drm_edid_free(drm_edid);
return num;
}
static const struct drm_connector_helper_funcs lt8912_connector_helper_funcs = {
.get_modes = lt8912_connector_get_modes,
- .mode_valid = lt8912_connector_mode_valid,
};
static void lt8912_bridge_mode_set(struct drm_bridge *bridge,
@@ -467,10 +477,8 @@ static int lt8912_attach_dsi(struct lt8912 *lt)
};
host = of_find_mipi_dsi_host_by_node(lt->host_node);
- if (!host) {
- dev_err(dev, "failed to find dsi host\n");
- return -EPROBE_DEFER;
- }
+ if (!host)
+ return dev_err_probe(dev, -EPROBE_DEFER, "failed to find dsi host\n");
dsi = devm_mipi_dsi_device_register_full(dev, host, &info);
if (IS_ERR(dsi)) {
@@ -485,7 +493,6 @@ static int lt8912_attach_dsi(struct lt8912 *lt)
dsi->format = MIPI_DSI_FMT_RGB888;
dsi->mode_flags = MIPI_DSI_MODE_VIDEO |
- MIPI_DSI_MODE_VIDEO_BURST |
MIPI_DSI_MODE_LPM |
MIPI_DSI_MODE_NO_EOT_PACKET;
@@ -498,14 +505,27 @@ static int lt8912_attach_dsi(struct lt8912 *lt)
return 0;
}
+static void lt8912_bridge_hpd_cb(void *data, enum drm_connector_status status)
+{
+ struct lt8912 *lt = data;
+
+ if (lt->bridge.dev)
+ drm_helper_hpd_irq_event(lt->bridge.dev);
+}
+
static int lt8912_bridge_connector_init(struct drm_bridge *bridge)
{
int ret;
struct lt8912 *lt = bridge_to_lt8912(bridge);
struct drm_connector *connector = &lt->connector;
- connector->polled = DRM_CONNECTOR_POLL_CONNECT |
- DRM_CONNECTOR_POLL_DISCONNECT;
+ if (lt->hdmi_port->ops & DRM_BRIDGE_OP_HPD) {
+ drm_bridge_hpd_enable(lt->hdmi_port, lt8912_bridge_hpd_cb, lt);
+ connector->polled = DRM_CONNECTOR_POLL_HPD;
+ } else {
+ connector->polled = DRM_CONNECTOR_POLL_CONNECT |
+ DRM_CONNECTOR_POLL_DISCONNECT;
+ }
ret = drm_connector_init(bridge->dev, connector,
&lt8912_connector_funcs,
@@ -523,11 +543,19 @@ exit:
}
static int lt8912_bridge_attach(struct drm_bridge *bridge,
+ struct drm_encoder *encoder,
enum drm_bridge_attach_flags flags)
{
struct lt8912 *lt = bridge_to_lt8912(bridge);
int ret;
+ ret = drm_bridge_attach(encoder, lt->hdmi_port, bridge,
+ DRM_BRIDGE_ATTACH_NO_CONNECTOR);
+ if (ret < 0) {
+ dev_err(lt->dev, "Failed to attach next bridge (%d)\n", ret);
+ return ret;
+ }
+
if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
ret = lt8912_bridge_connector_init(bridge);
if (ret) {
@@ -544,8 +572,6 @@ static int lt8912_bridge_attach(struct drm_bridge *bridge,
if (ret)
goto error;
- lt->is_attached = true;
-
return 0;
error:
@@ -557,26 +583,42 @@ static void lt8912_bridge_detach(struct drm_bridge *bridge)
{
struct lt8912 *lt = bridge_to_lt8912(bridge);
- if (lt->is_attached) {
- lt8912_hard_power_off(lt);
- drm_connector_unregister(&lt->connector);
- drm_connector_cleanup(&lt->connector);
- }
+ lt8912_hard_power_off(lt);
+
+ if (lt->connector.dev && lt->hdmi_port->ops & DRM_BRIDGE_OP_HPD)
+ drm_bridge_hpd_disable(lt->hdmi_port);
+}
+
+static enum drm_mode_status
+lt8912_bridge_mode_valid(struct drm_bridge *bridge,
+ const struct drm_display_info *info,
+ const struct drm_display_mode *mode)
+{
+ if (mode->clock > 150000)
+ return MODE_CLOCK_HIGH;
+
+ if (mode->hdisplay > 1920)
+ return MODE_BAD_HVALUE;
+
+ if (mode->vdisplay > 1080)
+ return MODE_BAD_VVALUE;
+
+ return MODE_OK;
}
static enum drm_connector_status
-lt8912_bridge_detect(struct drm_bridge *bridge)
+lt8912_bridge_detect(struct drm_bridge *bridge, struct drm_connector *connector)
{
struct lt8912 *lt = bridge_to_lt8912(bridge);
if (lt->hdmi_port->ops & DRM_BRIDGE_OP_DETECT)
- return drm_bridge_detect(lt->hdmi_port);
+ return drm_bridge_detect(lt->hdmi_port, connector);
return lt8912_check_cable_status(lt);
}
-static struct edid *lt8912_bridge_get_edid(struct drm_bridge *bridge,
- struct drm_connector *connector)
+static const struct drm_edid *lt8912_bridge_edid_read(struct drm_bridge *bridge,
+ struct drm_connector *connector)
{
struct lt8912 *lt = bridge_to_lt8912(bridge);
@@ -585,7 +627,7 @@ static struct edid *lt8912_bridge_get_edid(struct drm_bridge *bridge,
* given to the hdmi connector node.
*/
if (lt->hdmi_port->ops & DRM_BRIDGE_OP_EDID)
- return drm_bridge_get_edid(lt->hdmi_port, connector);
+ return drm_bridge_edid_read(lt->hdmi_port, connector);
dev_warn(lt->dev, "The connected bridge does not supports DRM_BRIDGE_OP_EDID\n");
return NULL;
@@ -594,12 +636,55 @@ static struct edid *lt8912_bridge_get_edid(struct drm_bridge *bridge,
static const struct drm_bridge_funcs lt8912_bridge_funcs = {
.attach = lt8912_bridge_attach,
.detach = lt8912_bridge_detach,
+ .mode_valid = lt8912_bridge_mode_valid,
.mode_set = lt8912_bridge_mode_set,
.enable = lt8912_bridge_enable,
.detect = lt8912_bridge_detect,
- .get_edid = lt8912_bridge_get_edid,
+ .edid_read = lt8912_bridge_edid_read,
};
+static int lt8912_bridge_resume(struct device *dev)
+{
+ struct lt8912 *lt = dev_get_drvdata(dev);
+ int ret;
+
+ ret = lt8912_hard_power_on(lt);
+ if (ret)
+ return ret;
+
+ ret = lt8912_soft_power_on(lt);
+ if (ret)
+ return ret;
+
+ return lt8912_video_on(lt);
+}
+
+static int lt8912_bridge_suspend(struct device *dev)
+{
+ struct lt8912 *lt = dev_get_drvdata(dev);
+
+ lt8912_hard_power_off(lt);
+
+ return 0;
+}
+
+static DEFINE_SIMPLE_DEV_PM_OPS(lt8912_bridge_pm_ops, lt8912_bridge_suspend, lt8912_bridge_resume);
+
+static int lt8912_get_regulators(struct lt8912 *lt)
+{
+ unsigned int i;
+ const char * const supply_names[] = {
+ "vdd", "vccmipirx", "vccsysclk", "vcclvdstx",
+ "vcchdmitx", "vcclvdspll", "vcchdmipll"
+ };
+
+ for (i = 0; i < ARRAY_SIZE(lt->supplies); i++)
+ lt->supplies[i].supply = supply_names[i];
+
+ return devm_regulator_bulk_get(lt->dev, ARRAY_SIZE(lt->supplies),
+ lt->supplies);
+}
+
static int lt8912_parse_dt(struct lt8912 *lt)
{
struct gpio_desc *gp_reset;
@@ -607,7 +692,6 @@ static int lt8912_parse_dt(struct lt8912 *lt)
int ret;
int data_lanes;
struct device_node *port_node;
- struct device_node *endpoint;
gp_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
if (IS_ERR(gp_reset)) {
@@ -618,16 +702,12 @@ static int lt8912_parse_dt(struct lt8912 *lt)
}
lt->gp_reset = gp_reset;
- endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
- if (!endpoint)
- return -ENODEV;
-
- data_lanes = of_property_count_u32_elems(endpoint, "data-lanes");
- of_node_put(endpoint);
+ data_lanes = drm_of_get_data_lanes_count_ep(dev->of_node, 0, -1, 1, 4);
if (data_lanes < 0) {
dev_err(lt->dev, "%s: Bad data-lanes property\n", __func__);
return data_lanes;
}
+
lt->data_lanes = data_lanes;
lt->host_node = of_graph_get_remote_node(dev->of_node, 0, -1);
@@ -645,8 +725,8 @@ static int lt8912_parse_dt(struct lt8912 *lt)
lt->hdmi_port = of_drm_find_bridge(port_node);
if (!lt->hdmi_port) {
- dev_err(lt->dev, "%s: Failed to get hdmi port\n", __func__);
- ret = -ENODEV;
+ ret = -EPROBE_DEFER;
+ dev_err_probe(lt->dev, ret, "%s: Failed to get hdmi port\n", __func__);
goto err_free_host_node;
}
@@ -656,6 +736,10 @@ static int lt8912_parse_dt(struct lt8912 *lt)
goto err_free_host_node;
}
+ ret = lt8912_get_regulators(lt);
+ if (ret)
+ goto err_free_host_node;
+
of_node_put(port_node);
return 0;
@@ -671,16 +755,16 @@ static int lt8912_put_dt(struct lt8912 *lt)
return 0;
}
-static int lt8912_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int lt8912_probe(struct i2c_client *client)
{
static struct lt8912 *lt;
int ret = 0;
struct device *dev = &client->dev;
- lt = devm_kzalloc(dev, sizeof(struct lt8912), GFP_KERNEL);
- if (!lt)
- return -ENOMEM;
+ lt = devm_drm_bridge_alloc(dev, struct lt8912, bridge,
+ &lt8912_bridge_funcs);
+ if (IS_ERR(lt))
+ return PTR_ERR(lt);
lt->dev = dev;
lt->i2c_client[0] = client;
@@ -695,7 +779,6 @@ static int lt8912_probe(struct i2c_client *client,
i2c_set_clientdata(client, lt);
- lt->bridge.funcs = &lt8912_bridge_funcs;
lt->bridge.of_node = dev->of_node;
lt->bridge.ops = (DRM_BRIDGE_OP_EDID |
DRM_BRIDGE_OP_DETECT);
@@ -717,15 +800,13 @@ err_dt_parse:
return ret;
}
-static int lt8912_remove(struct i2c_client *client)
+static void lt8912_remove(struct i2c_client *client)
{
struct lt8912 *lt = i2c_get_clientdata(client);
- lt8912_bridge_detach(&lt->bridge);
drm_bridge_remove(&lt->bridge);
lt8912_free_i2c(lt);
lt8912_put_dt(lt);
- return 0;
}
static const struct of_device_id lt8912_dt_match[] = {
@@ -735,8 +816,8 @@ static const struct of_device_id lt8912_dt_match[] = {
MODULE_DEVICE_TABLE(of, lt8912_dt_match);
static const struct i2c_device_id lt8912_id[] = {
- {"lt8912", 0},
- {},
+ { "lt8912" },
+ {}
};
MODULE_DEVICE_TABLE(i2c, lt8912_id);
@@ -744,6 +825,7 @@ static struct i2c_driver lt8912_i2c_driver = {
.driver = {
.name = "lt8912",
.of_match_table = lt8912_dt_match,
+ .pm = pm_sleep_ptr(&lt8912_bridge_pm_ops),
},
.probe = lt8912_probe,
.remove = lt8912_remove,