diff options
Diffstat (limited to 'drivers/gpu/drm/i915/display/intel_snps_phy.c')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_snps_phy.c | 226 |
1 files changed, 140 insertions, 86 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_snps_phy.c b/drivers/gpu/drm/i915/display/intel_snps_phy.c index c65c771f5c46..295030742294 100644 --- a/drivers/gpu/drm/i915/display/intel_snps_phy.c +++ b/drivers/gpu/drm/i915/display/intel_snps_phy.c @@ -3,13 +3,17 @@ * Copyright © 2019 Intel Corporation */ -#include <linux/util_macros.h> +#include <linux/math.h> + +#include <drm/drm_print.h> -#include "i915_reg.h" #include "intel_ddi.h" #include "intel_ddi_buf_trans.h" #include "intel_de.h" +#include "intel_display_regs.h" #include "intel_display_types.h" +#include "intel_display_utils.h" +#include "intel_snps_hdmi_pll.h" #include "intel_snps_phy.h" #include "intel_snps_phy_regs.h" @@ -25,12 +29,12 @@ * since it is not handled by the shared DPLL framework as on other platforms. */ -void intel_snps_phy_wait_for_calibration(struct drm_i915_private *i915) +void intel_snps_phy_wait_for_calibration(struct intel_display *display) { enum phy phy; for_each_phy_masked(phy, ~0) { - if (!intel_phy_is_snps(i915, phy)) + if (!intel_phy_is_snps(display, phy)) continue; /* @@ -38,36 +42,38 @@ void intel_snps_phy_wait_for_calibration(struct drm_i915_private *i915) * which phy was affected and skip setup of the corresponding * output later. */ - if (intel_de_wait_for_clear(i915, DG2_PHY_MISC(phy), - DG2_PHY_DP_TX_ACK_MASK, 25)) - i915->display.snps.phy_failed_calibration |= BIT(phy); + if (intel_de_wait_for_clear_ms(display, DG2_PHY_MISC(phy), + DG2_PHY_DP_TX_ACK_MASK, 25)) + display->snps.phy_failed_calibration |= BIT(phy); } } -void intel_snps_phy_update_psr_power_state(struct drm_i915_private *i915, - enum phy phy, bool enable) +void intel_snps_phy_update_psr_power_state(struct intel_encoder *encoder, + bool enable) { + struct intel_display *display = to_intel_display(encoder); + enum phy phy = intel_encoder_to_phy(encoder); u32 val; - if (!intel_phy_is_snps(i915, phy)) + if (!intel_encoder_is_snps(encoder)) return; val = REG_FIELD_PREP(SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR, enable ? 2 : 3); - intel_de_rmw(i915, SNPS_PHY_TX_REQ(phy), + intel_de_rmw(display, SNPS_PHY_TX_REQ(phy), SNPS_PHY_TX_REQ_LN_DIS_PWR_STATE_PSR, val); } void intel_snps_phy_set_signal_levels(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state) { - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); + struct intel_display *display = to_intel_display(encoder); const struct intel_ddi_buf_trans *trans; - enum phy phy = intel_port_to_phy(dev_priv, encoder->port); + enum phy phy = intel_encoder_to_phy(encoder); int n_entries, ln; trans = encoder->get_buf_trans(encoder, crtc_state, &n_entries); - if (drm_WARN_ON_ONCE(&dev_priv->drm, !trans)) + if (drm_WARN_ON_ONCE(display->drm, !trans)) return; for (ln = 0; ln < 4; ln++) { @@ -78,7 +84,7 @@ void intel_snps_phy_set_signal_levels(struct intel_encoder *encoder, val |= REG_FIELD_PREP(SNPS_PHY_TX_EQ_PRE, trans->entries[level].snps.pre_cursor); val |= REG_FIELD_PREP(SNPS_PHY_TX_EQ_POST, trans->entries[level].snps.post_cursor); - intel_de_write(dev_priv, SNPS_PHY_TX_EQ(ln, phy), val); + intel_de_write(display, SNPS_PHY_TX_EQ(ln, phy), val); } } @@ -518,7 +524,7 @@ static const struct intel_mpllb_state dg2_hdmi_148_5 = { REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1), }; -/* values in the below table are calculted using the algo */ +/* values in the below table are calculated using the algo */ static const struct intel_mpllb_state dg2_hdmi_25200 = { .clock = 25200, .ref_control = @@ -1419,6 +1425,36 @@ static const struct intel_mpllb_state dg2_hdmi_262750 = { REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1), }; +static const struct intel_mpllb_state dg2_hdmi_267300 = { + .clock = 267300, + .ref_control = + REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3), + .mpllb_cp = + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 7) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 14) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124), + .mpllb_div = + REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_FREQ_VCO, 3), + .mpllb_div2 = + REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 74) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1), + .mpllb_fracn1 = + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 65535), + .mpllb_fracn2 = + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 30146) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 36699), + .mpllb_sscen = + REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1), +}; + static const struct intel_mpllb_state dg2_hdmi_268500 = { .clock = 268500, .ref_control = @@ -1509,6 +1545,36 @@ static const struct intel_mpllb_state dg2_hdmi_241500 = { REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1), }; +static const struct intel_mpllb_state dg2_hdmi_319890 = { + .clock = 319890, + .ref_control = + REG_FIELD_PREP(SNPS_PHY_REF_CONTROL_REF_RANGE, 3), + .mpllb_cp = + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT, 6) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP, 14) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_INT_GS, 64) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_CP_PROP_GS, 124), + .mpllb_div = + REG_FIELD_PREP(SNPS_PHY_MPLLB_DIV5_CLK_EN, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_TX_CLK_DIV, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_PMIX_EN, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_V2I, 2) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_FREQ_VCO, 2), + .mpllb_div2 = + REG_FIELD_PREP(SNPS_PHY_MPLLB_REF_CLK_DIV, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_MULTIPLIER, 94) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_HDMI_DIV, 1), + .mpllb_fracn1 = + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_CGG_UPDATE_EN, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_EN, 1) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_DEN, 65535), + .mpllb_fracn2 = + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_QUOT, 64094) | + REG_FIELD_PREP(SNPS_PHY_MPLLB_FRACN_REM, 13631), + .mpllb_sscen = + REG_FIELD_PREP(SNPS_PHY_MPLLB_SSC_UP_SPREAD, 1), +}; + static const struct intel_mpllb_state dg2_hdmi_497750 = { .clock = 497750, .ref_control = @@ -1696,8 +1762,10 @@ static const struct intel_mpllb_state * const dg2_hdmi_tables[] = { &dg2_hdmi_209800, &dg2_hdmi_241500, &dg2_hdmi_262750, + &dg2_hdmi_267300, &dg2_hdmi_268500, &dg2_hdmi_296703, + &dg2_hdmi_319890, &dg2_hdmi_497750, &dg2_hdmi_592000, &dg2_hdmi_593407, @@ -1723,44 +1791,37 @@ intel_mpllb_tables_get(struct intel_crtc_state *crtc_state, int intel_mpllb_calc_state(struct intel_crtc_state *crtc_state, struct intel_encoder *encoder) { - struct drm_i915_private *i915 = to_i915(encoder->base.dev); const struct intel_mpllb_state * const *tables; int i; - if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { - if (intel_snps_phy_check_hdmi_link_rate(crtc_state->port_clock) - != MODE_OK) { - /* - * FIXME: Can only support fixed HDMI frequencies - * until we have a proper algorithm under a valid - * license. - */ - drm_dbg_kms(&i915->drm, "Can't support HDMI link rate %d\n", - crtc_state->port_clock); - return -EINVAL; - } - } - tables = intel_mpllb_tables_get(crtc_state, encoder); if (!tables) return -EINVAL; for (i = 0; tables[i]; i++) { if (crtc_state->port_clock == tables[i]->clock) { - crtc_state->mpllb_state = *tables[i]; + crtc_state->dpll_hw_state.mpllb = *tables[i]; return 0; } } + /* For HDMI PLLs try SNPS PHY algorithm, if there are no precomputed tables */ + if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) { + intel_snps_hdmi_pll_compute_mpllb(&crtc_state->dpll_hw_state.mpllb, + crtc_state->port_clock); + + return 0; + } + return -EINVAL; } void intel_mpllb_enable(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state) { - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); - const struct intel_mpllb_state *pll_state = &crtc_state->mpllb_state; - enum phy phy = intel_port_to_phy(dev_priv, encoder->port); + struct intel_display *display = to_intel_display(encoder); + const struct intel_mpllb_state *pll_state = &crtc_state->dpll_hw_state.mpllb; + enum phy phy = intel_encoder_to_phy(encoder); i915_reg_t enable_reg = (phy <= PHY_D ? DG2_PLL_ENABLE(phy) : MG_PLL_ENABLE(0)); @@ -1768,13 +1829,13 @@ void intel_mpllb_enable(struct intel_encoder *encoder, * 3. Software programs the following PLL registers for the desired * frequency. */ - intel_de_write(dev_priv, SNPS_PHY_MPLLB_CP(phy), pll_state->mpllb_cp); - intel_de_write(dev_priv, SNPS_PHY_MPLLB_DIV(phy), pll_state->mpllb_div); - intel_de_write(dev_priv, SNPS_PHY_MPLLB_DIV2(phy), pll_state->mpllb_div2); - intel_de_write(dev_priv, SNPS_PHY_MPLLB_SSCEN(phy), pll_state->mpllb_sscen); - intel_de_write(dev_priv, SNPS_PHY_MPLLB_SSCSTEP(phy), pll_state->mpllb_sscstep); - intel_de_write(dev_priv, SNPS_PHY_MPLLB_FRACN1(phy), pll_state->mpllb_fracn1); - intel_de_write(dev_priv, SNPS_PHY_MPLLB_FRACN2(phy), pll_state->mpllb_fracn2); + intel_de_write(display, SNPS_PHY_MPLLB_CP(phy), pll_state->mpllb_cp); + intel_de_write(display, SNPS_PHY_MPLLB_DIV(phy), pll_state->mpllb_div); + intel_de_write(display, SNPS_PHY_MPLLB_DIV2(phy), pll_state->mpllb_div2); + intel_de_write(display, SNPS_PHY_MPLLB_SSCEN(phy), pll_state->mpllb_sscen); + intel_de_write(display, SNPS_PHY_MPLLB_SSCSTEP(phy), pll_state->mpllb_sscstep); + intel_de_write(display, SNPS_PHY_MPLLB_FRACN1(phy), pll_state->mpllb_fracn1); + intel_de_write(display, SNPS_PHY_MPLLB_FRACN2(phy), pll_state->mpllb_fracn2); /* * 4. If the frequency will result in a change to the voltage @@ -1785,7 +1846,7 @@ void intel_mpllb_enable(struct intel_encoder *encoder, */ /* 5. Software sets DPLL_ENABLE [PLL Enable] to "1". */ - intel_de_rmw(dev_priv, enable_reg, 0, PLL_ENABLE); + intel_de_rmw(display, enable_reg, 0, PLL_ENABLE); /* * 9. Software sets SNPS_PHY_MPLLB_DIV dp_mpllb_force_en to "1". This @@ -1794,7 +1855,7 @@ void intel_mpllb_enable(struct intel_encoder *encoder, * PLL because that will start the PLL before it has sampled the * divider values. */ - intel_de_write(dev_priv, SNPS_PHY_MPLLB_DIV(phy), + intel_de_write(display, SNPS_PHY_MPLLB_DIV(phy), pll_state->mpllb_div | SNPS_PHY_MPLLB_FORCE_EN); /* @@ -1802,8 +1863,8 @@ void intel_mpllb_enable(struct intel_encoder *encoder, * is locked at new settings. This register bit is sampling PHY * dp_mpllb_state interface signal. */ - if (intel_de_wait_for_set(dev_priv, enable_reg, PLL_LOCK, 5)) - drm_dbg_kms(&dev_priv->drm, "Port %c PLL not locked\n", phy_name(phy)); + if (intel_de_wait_for_set_ms(display, enable_reg, PLL_LOCK, 5)) + drm_dbg_kms(display->drm, "Port %c PLL not locked\n", phy_name(phy)); /* * 11. If the frequency will result in a change to the voltage @@ -1816,8 +1877,8 @@ void intel_mpllb_enable(struct intel_encoder *encoder, void intel_mpllb_disable(struct intel_encoder *encoder) { - struct drm_i915_private *i915 = to_i915(encoder->base.dev); - enum phy phy = intel_port_to_phy(i915, encoder->port); + struct intel_display *display = to_intel_display(encoder); + enum phy phy = intel_encoder_to_phy(encoder); i915_reg_t enable_reg = (phy <= PHY_D ? DG2_PLL_ENABLE(phy) : MG_PLL_ENABLE(0)); @@ -1830,20 +1891,20 @@ void intel_mpllb_disable(struct intel_encoder *encoder) */ /* 2. Software programs DPLL_ENABLE [PLL Enable] to "0" */ - intel_de_rmw(i915, enable_reg, PLL_ENABLE, 0); + intel_de_rmw(display, enable_reg, PLL_ENABLE, 0); /* * 4. Software programs SNPS_PHY_MPLLB_DIV dp_mpllb_force_en to "0". * This will allow the PLL to stop running. */ - intel_de_rmw(i915, SNPS_PHY_MPLLB_DIV(phy), SNPS_PHY_MPLLB_FORCE_EN, 0); + intel_de_rmw(display, SNPS_PHY_MPLLB_DIV(phy), SNPS_PHY_MPLLB_FORCE_EN, 0); /* * 5. Software polls DPLL_ENABLE [PLL Lock] for PHY acknowledgment * (dp_txX_ack) that the new transmitter setting request is completed. */ - if (intel_de_wait_for_clear(i915, enable_reg, PLL_LOCK, 5)) - drm_err(&i915->drm, "Port %c PLL not locked\n", phy_name(phy)); + if (intel_de_wait_for_clear_ms(display, enable_reg, PLL_LOCK, 5)) + drm_err(display->drm, "Port %c PLL not locked\n", phy_name(phy)); /* * 6. If the frequency will result in a change to the voltage @@ -1888,16 +1949,16 @@ int intel_mpllb_calc_port_clock(struct intel_encoder *encoder, void intel_mpllb_readout_hw_state(struct intel_encoder *encoder, struct intel_mpllb_state *pll_state) { - struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); - enum phy phy = intel_port_to_phy(dev_priv, encoder->port); + struct intel_display *display = to_intel_display(encoder); + enum phy phy = intel_encoder_to_phy(encoder); - pll_state->mpllb_cp = intel_de_read(dev_priv, SNPS_PHY_MPLLB_CP(phy)); - pll_state->mpllb_div = intel_de_read(dev_priv, SNPS_PHY_MPLLB_DIV(phy)); - pll_state->mpllb_div2 = intel_de_read(dev_priv, SNPS_PHY_MPLLB_DIV2(phy)); - pll_state->mpllb_sscen = intel_de_read(dev_priv, SNPS_PHY_MPLLB_SSCEN(phy)); - pll_state->mpllb_sscstep = intel_de_read(dev_priv, SNPS_PHY_MPLLB_SSCSTEP(phy)); - pll_state->mpllb_fracn1 = intel_de_read(dev_priv, SNPS_PHY_MPLLB_FRACN1(phy)); - pll_state->mpllb_fracn2 = intel_de_read(dev_priv, SNPS_PHY_MPLLB_FRACN2(phy)); + pll_state->mpllb_cp = intel_de_read(display, SNPS_PHY_MPLLB_CP(phy)); + pll_state->mpllb_div = intel_de_read(display, SNPS_PHY_MPLLB_DIV(phy)); + pll_state->mpllb_div2 = intel_de_read(display, SNPS_PHY_MPLLB_DIV2(phy)); + pll_state->mpllb_sscen = intel_de_read(display, SNPS_PHY_MPLLB_SSCEN(phy)); + pll_state->mpllb_sscstep = intel_de_read(display, SNPS_PHY_MPLLB_SSCSTEP(phy)); + pll_state->mpllb_fracn1 = intel_de_read(display, SNPS_PHY_MPLLB_FRACN1(phy)); + pll_state->mpllb_fracn2 = intel_de_read(display, SNPS_PHY_MPLLB_FRACN2(phy)); /* * REF_CONTROL is under firmware control and never programmed by the @@ -1905,7 +1966,7 @@ void intel_mpllb_readout_hw_state(struct intel_encoder *encoder, * only tells us the expected value for one field in this register, * so we'll only read out those specific bits here. */ - pll_state->ref_control = intel_de_read(dev_priv, SNPS_PHY_REF_CONTROL(phy)) & + pll_state->ref_control = intel_de_read(display, SNPS_PHY_REF_CONTROL(phy)) & SNPS_PHY_REF_CONTROL_REF_RANGE; /* @@ -1917,43 +1978,36 @@ void intel_mpllb_readout_hw_state(struct intel_encoder *encoder, pll_state->mpllb_div &= ~SNPS_PHY_MPLLB_FORCE_EN; } -int intel_snps_phy_check_hdmi_link_rate(int clock) -{ - const struct intel_mpllb_state * const *tables = dg2_hdmi_tables; - int i; - - for (i = 0; tables[i]; i++) { - if (clock == tables[i]->clock) - return MODE_OK; - } - - return MODE_CLOCK_RANGE; -} - void intel_mpllb_state_verify(struct intel_atomic_state *state, - struct intel_crtc_state *new_crtc_state) + struct intel_crtc *crtc) { - struct drm_i915_private *i915 = to_i915(state->base.dev); - struct intel_mpllb_state mpllb_hw_state = { 0 }; - struct intel_mpllb_state *mpllb_sw_state = &new_crtc_state->mpllb_state; - struct intel_crtc *crtc = to_intel_crtc(new_crtc_state->uapi.crtc); + struct intel_display *display = to_intel_display(state); + const struct intel_crtc_state *new_crtc_state = + intel_atomic_get_new_crtc_state(state, crtc); + struct intel_mpllb_state mpllb_hw_state = {}; + const struct intel_mpllb_state *mpllb_sw_state = &new_crtc_state->dpll_hw_state.mpllb; struct intel_encoder *encoder; - if (!IS_DG2(i915)) + if (!display->platform.dg2) return; if (!new_crtc_state->hw.active) return; + /* intel_get_crtc_new_encoder() only works for modeset/fastset commits */ + if (!intel_crtc_needs_modeset(new_crtc_state) && + !intel_crtc_needs_fastset(new_crtc_state)) + return; + encoder = intel_get_crtc_new_encoder(state, new_crtc_state); intel_mpllb_readout_hw_state(encoder, &mpllb_hw_state); #define MPLLB_CHECK(__name) \ - I915_STATE_WARN(mpllb_sw_state->__name != mpllb_hw_state.__name, \ - "[CRTC:%d:%s] mismatch in MPLLB: %s (expected 0x%08x, found 0x%08x)", \ - crtc->base.base.id, crtc->base.name, \ - __stringify(__name), \ - mpllb_sw_state->__name, mpllb_hw_state.__name) + INTEL_DISPLAY_STATE_WARN(display, mpllb_sw_state->__name != mpllb_hw_state.__name, \ + "[CRTC:%d:%s] mismatch in MPLLB: %s (expected 0x%08x, found 0x%08x)", \ + crtc->base.base.id, crtc->base.name, \ + __stringify(__name), \ + mpllb_sw_state->__name, mpllb_hw_state.__name) MPLLB_CHECK(mpllb_cp); MPLLB_CHECK(mpllb_div); |