diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_reg.h')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_reg.h | 5540 |
1 files changed, 892 insertions, 4648 deletions
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index f2326fc60ac9..5bf3b4ab2baa 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -25,748 +25,405 @@ #ifndef _I915_REG_H_ #define _I915_REG_H_ -#define _PIPE(pipe, a, b) ((a) + (pipe)*((b)-(a))) -#define _TRANSCODER(tran, a, b) ((a) + (tran)*((b)-(a))) - -#define _PORT(port, a, b) ((a) + (port)*((b)-(a))) - -#define _MASKED_BIT_ENABLE(a) (((a) << 16) | (a)) -#define _MASKED_BIT_DISABLE(a) ((a) << 16) - -/* - * The Bridge device's PCI config space has information about the - * fb aperture size and the amount of pre-reserved memory. - * This is all handled in the intel-gtt.ko module. i915.ko only - * cares about the vga bit for the vga rbiter. - */ -#define INTEL_GMCH_CTRL 0x52 -#define INTEL_GMCH_VGA_DISABLE (1 << 1) -#define SNB_GMCH_CTRL 0x50 -#define SNB_GMCH_GGMS_SHIFT 8 /* GTT Graphics Memory Size */ -#define SNB_GMCH_GGMS_MASK 0x3 -#define SNB_GMCH_GMS_SHIFT 3 /* Graphics Mode Select */ -#define SNB_GMCH_GMS_MASK 0x1f - - -/* PCI config space */ - -#define HPLLCC 0xc0 /* 855 only */ -#define GC_CLOCK_CONTROL_MASK (0xf << 0) -#define GC_CLOCK_133_200 (0 << 0) -#define GC_CLOCK_100_200 (1 << 0) -#define GC_CLOCK_100_133 (2 << 0) -#define GC_CLOCK_166_250 (3 << 0) -#define GCFGC2 0xda -#define GCFGC 0xf0 /* 915+ only */ -#define GC_LOW_FREQUENCY_ENABLE (1 << 7) -#define GC_DISPLAY_CLOCK_190_200_MHZ (0 << 4) -#define GC_DISPLAY_CLOCK_333_MHZ (4 << 4) -#define GC_DISPLAY_CLOCK_MASK (7 << 4) -#define GM45_GC_RENDER_CLOCK_MASK (0xf << 0) -#define GM45_GC_RENDER_CLOCK_266_MHZ (8 << 0) -#define GM45_GC_RENDER_CLOCK_320_MHZ (9 << 0) -#define GM45_GC_RENDER_CLOCK_400_MHZ (0xb << 0) -#define GM45_GC_RENDER_CLOCK_533_MHZ (0xc << 0) -#define I965_GC_RENDER_CLOCK_MASK (0xf << 0) -#define I965_GC_RENDER_CLOCK_267_MHZ (2 << 0) -#define I965_GC_RENDER_CLOCK_333_MHZ (3 << 0) -#define I965_GC_RENDER_CLOCK_444_MHZ (4 << 0) -#define I965_GC_RENDER_CLOCK_533_MHZ (5 << 0) -#define I945_GC_RENDER_CLOCK_MASK (7 << 0) -#define I945_GC_RENDER_CLOCK_166_MHZ (0 << 0) -#define I945_GC_RENDER_CLOCK_200_MHZ (1 << 0) -#define I945_GC_RENDER_CLOCK_250_MHZ (3 << 0) -#define I945_GC_RENDER_CLOCK_400_MHZ (5 << 0) -#define I915_GC_RENDER_CLOCK_MASK (7 << 0) -#define I915_GC_RENDER_CLOCK_166_MHZ (0 << 0) -#define I915_GC_RENDER_CLOCK_200_MHZ (1 << 0) -#define I915_GC_RENDER_CLOCK_333_MHZ (4 << 0) -#define LBB 0xf4 - -/* Graphics reset regs */ -#define I965_GDRST 0xc0 /* PCI config register */ -#define ILK_GDSR 0x2ca4 /* MCHBAR offset */ -#define GRDOM_FULL (0<<2) -#define GRDOM_RENDER (1<<2) -#define GRDOM_MEDIA (3<<2) -#define GRDOM_MASK (3<<2) -#define GRDOM_RESET_ENABLE (1<<0) - -#define GEN6_MBCUNIT_SNPCR 0x900c /* for LLC config */ -#define GEN6_MBC_SNPCR_SHIFT 21 -#define GEN6_MBC_SNPCR_MASK (3<<21) -#define GEN6_MBC_SNPCR_MAX (0<<21) -#define GEN6_MBC_SNPCR_MED (1<<21) -#define GEN6_MBC_SNPCR_LOW (2<<21) -#define GEN6_MBC_SNPCR_MIN (3<<21) /* only 1/16th of the cache is shared */ - -#define GEN6_MBCTL 0x0907c -#define GEN6_MBCTL_ENABLE_BOOT_FETCH (1 << 4) -#define GEN6_MBCTL_CTX_FETCH_NEEDED (1 << 3) -#define GEN6_MBCTL_BME_UPDATE_ENABLE (1 << 2) -#define GEN6_MBCTL_MAE_UPDATE_ENABLE (1 << 1) -#define GEN6_MBCTL_BOOT_FETCH_MECH (1 << 0) - -#define GEN6_GDRST 0x941c -#define GEN6_GRDOM_FULL (1 << 0) -#define GEN6_GRDOM_RENDER (1 << 1) -#define GEN6_GRDOM_MEDIA (1 << 2) -#define GEN6_GRDOM_BLT (1 << 3) - -#define RING_PP_DIR_BASE(ring) ((ring)->mmio_base+0x228) -#define RING_PP_DIR_BASE_READ(ring) ((ring)->mmio_base+0x518) -#define RING_PP_DIR_DCLV(ring) ((ring)->mmio_base+0x220) -#define PP_DIR_DCLV_2G 0xffffffff - -#define GAM_ECOCHK 0x4090 -#define ECOCHK_SNB_BIT (1<<10) -#define HSW_ECOCHK_ARB_PRIO_SOL (1<<6) -#define ECOCHK_PPGTT_CACHE64B (0x3<<3) -#define ECOCHK_PPGTT_CACHE4B (0x0<<3) -#define ECOCHK_PPGTT_GFDT_IVB (0x1<<4) -#define ECOCHK_PPGTT_LLC_IVB (0x1<<3) -#define ECOCHK_PPGTT_UC_HSW (0x1<<3) -#define ECOCHK_PPGTT_WT_HSW (0x2<<3) -#define ECOCHK_PPGTT_WB_HSW (0x3<<3) - -#define GAC_ECO_BITS 0x14090 -#define ECOBITS_SNB_BIT (1<<13) -#define ECOBITS_PPGTT_CACHE64B (3<<8) -#define ECOBITS_PPGTT_CACHE4B (0<<8) - -#define GAB_CTL 0x24000 -#define GAB_CTL_CONT_AFTER_PAGEFAULT (1<<8) - -/* VGA stuff */ - -#define VGA_ST01_MDA 0x3ba -#define VGA_ST01_CGA 0x3da - -#define VGA_MSR_WRITE 0x3c2 -#define VGA_MSR_READ 0x3cc -#define VGA_MSR_MEM_EN (1<<1) -#define VGA_MSR_CGA_MODE (1<<0) - -#define VGA_SR_INDEX 0x3c4 -#define SR01 1 -#define VGA_SR_DATA 0x3c5 - -#define VGA_AR_INDEX 0x3c0 -#define VGA_AR_VID_EN (1<<5) -#define VGA_AR_DATA_WRITE 0x3c0 -#define VGA_AR_DATA_READ 0x3c1 - -#define VGA_GR_INDEX 0x3ce -#define VGA_GR_DATA 0x3cf -/* GR05 */ -#define VGA_GR_MEM_READ_MODE_SHIFT 3 -#define VGA_GR_MEM_READ_MODE_PLANE 1 -/* GR06 */ -#define VGA_GR_MEM_MODE_MASK 0xc -#define VGA_GR_MEM_MODE_SHIFT 2 -#define VGA_GR_MEM_A0000_AFFFF 0 -#define VGA_GR_MEM_A0000_BFFFF 1 -#define VGA_GR_MEM_B0000_B7FFF 2 -#define VGA_GR_MEM_B0000_BFFFF 3 - -#define VGA_DACMASK 0x3c6 -#define VGA_DACRX 0x3c7 -#define VGA_DACWX 0x3c8 -#define VGA_DACDATA 0x3c9 - -#define VGA_CR_INDEX_MDA 0x3b4 -#define VGA_CR_DATA_MDA 0x3b5 -#define VGA_CR_INDEX_CGA 0x3d4 -#define VGA_CR_DATA_CGA 0x3d5 - -/* - * Memory interface instructions used by the kernel - */ -#define MI_INSTR(opcode, flags) (((opcode) << 23) | (flags)) - -#define MI_NOOP MI_INSTR(0, 0) -#define MI_USER_INTERRUPT MI_INSTR(0x02, 0) -#define MI_WAIT_FOR_EVENT MI_INSTR(0x03, 0) -#define MI_WAIT_FOR_OVERLAY_FLIP (1<<16) -#define MI_WAIT_FOR_PLANE_B_FLIP (1<<6) -#define MI_WAIT_FOR_PLANE_A_FLIP (1<<2) -#define MI_WAIT_FOR_PLANE_A_SCANLINES (1<<1) -#define MI_FLUSH MI_INSTR(0x04, 0) -#define MI_READ_FLUSH (1 << 0) -#define MI_EXE_FLUSH (1 << 1) -#define MI_NO_WRITE_FLUSH (1 << 2) -#define MI_SCENE_COUNT (1 << 3) /* just increment scene count */ -#define MI_END_SCENE (1 << 4) /* flush binner and incr scene count */ -#define MI_INVALIDATE_ISP (1 << 5) /* invalidate indirect state pointers */ -#define MI_BATCH_BUFFER_END MI_INSTR(0x0a, 0) -#define MI_SUSPEND_FLUSH MI_INSTR(0x0b, 0) -#define MI_SUSPEND_FLUSH_EN (1<<0) -#define MI_REPORT_HEAD MI_INSTR(0x07, 0) -#define MI_OVERLAY_FLIP MI_INSTR(0x11, 0) -#define MI_OVERLAY_CONTINUE (0x0<<21) -#define MI_OVERLAY_ON (0x1<<21) -#define MI_OVERLAY_OFF (0x2<<21) -#define MI_LOAD_SCAN_LINES_INCL MI_INSTR(0x12, 0) -#define MI_DISPLAY_FLIP MI_INSTR(0x14, 2) -#define MI_DISPLAY_FLIP_I915 MI_INSTR(0x14, 1) -#define MI_DISPLAY_FLIP_PLANE(n) ((n) << 20) -/* IVB has funny definitions for which plane to flip. */ -#define MI_DISPLAY_FLIP_IVB_PLANE_A (0 << 19) -#define MI_DISPLAY_FLIP_IVB_PLANE_B (1 << 19) -#define MI_DISPLAY_FLIP_IVB_SPRITE_A (2 << 19) -#define MI_DISPLAY_FLIP_IVB_SPRITE_B (3 << 19) -#define MI_DISPLAY_FLIP_IVB_PLANE_C (4 << 19) -#define MI_DISPLAY_FLIP_IVB_SPRITE_C (5 << 19) -#define MI_ARB_ON_OFF MI_INSTR(0x08, 0) -#define MI_ARB_ENABLE (1<<0) -#define MI_ARB_DISABLE (0<<0) - -#define MI_SET_CONTEXT MI_INSTR(0x18, 0) -#define MI_MM_SPACE_GTT (1<<8) -#define MI_MM_SPACE_PHYSICAL (0<<8) -#define MI_SAVE_EXT_STATE_EN (1<<3) -#define MI_RESTORE_EXT_STATE_EN (1<<2) -#define MI_FORCE_RESTORE (1<<1) -#define MI_RESTORE_INHIBIT (1<<0) -#define MI_STORE_DWORD_IMM MI_INSTR(0x20, 1) -#define MI_MEM_VIRTUAL (1 << 22) /* 965+ only */ -#define MI_STORE_DWORD_INDEX MI_INSTR(0x21, 1) -#define MI_STORE_DWORD_INDEX_SHIFT 2 -/* Official intel docs are somewhat sloppy concerning MI_LOAD_REGISTER_IMM: - * - Always issue a MI_NOOP _before_ the MI_LOAD_REGISTER_IMM - otherwise hw - * simply ignores the register load under certain conditions. - * - One can actually load arbitrary many arbitrary registers: Simply issue x - * address/value pairs. Don't overdue it, though, x <= 2^4 must hold! - */ -#define MI_LOAD_REGISTER_IMM(x) MI_INSTR(0x22, 2*x-1) -#define MI_FLUSH_DW MI_INSTR(0x26, 1) /* for GEN6 */ -#define MI_FLUSH_DW_STORE_INDEX (1<<21) -#define MI_INVALIDATE_TLB (1<<18) -#define MI_FLUSH_DW_OP_STOREDW (1<<14) -#define MI_INVALIDATE_BSD (1<<7) -#define MI_FLUSH_DW_USE_GTT (1<<2) -#define MI_FLUSH_DW_USE_PPGTT (0<<2) -#define MI_BATCH_BUFFER MI_INSTR(0x30, 1) -#define MI_BATCH_NON_SECURE (1) -/* for snb/ivb/vlv this also means "batch in ppgtt" when ppgtt is enabled. */ -#define MI_BATCH_NON_SECURE_I965 (1<<8) -#define MI_BATCH_PPGTT_HSW (1<<8) -#define MI_BATCH_NON_SECURE_HSW (1<<13) -#define MI_BATCH_BUFFER_START MI_INSTR(0x31, 0) -#define MI_BATCH_GTT (2<<6) /* aliased with (1<<7) on gen4 */ -#define MI_SEMAPHORE_MBOX MI_INSTR(0x16, 1) /* gen6+ */ -#define MI_SEMAPHORE_GLOBAL_GTT (1<<22) -#define MI_SEMAPHORE_UPDATE (1<<21) -#define MI_SEMAPHORE_COMPARE (1<<20) -#define MI_SEMAPHORE_REGISTER (1<<18) -#define MI_SEMAPHORE_SYNC_VR (0<<16) /* RCS wait for VCS (RVSYNC) */ -#define MI_SEMAPHORE_SYNC_VER (1<<16) /* RCS wait for VECS (RVESYNC) */ -#define MI_SEMAPHORE_SYNC_BR (2<<16) /* RCS wait for BCS (RBSYNC) */ -#define MI_SEMAPHORE_SYNC_BV (0<<16) /* VCS wait for BCS (VBSYNC) */ -#define MI_SEMAPHORE_SYNC_VEV (1<<16) /* VCS wait for VECS (VVESYNC) */ -#define MI_SEMAPHORE_SYNC_RV (2<<16) /* VCS wait for RCS (VRSYNC) */ -#define MI_SEMAPHORE_SYNC_RB (0<<16) /* BCS wait for RCS (BRSYNC) */ -#define MI_SEMAPHORE_SYNC_VEB (1<<16) /* BCS wait for VECS (BVESYNC) */ -#define MI_SEMAPHORE_SYNC_VB (2<<16) /* BCS wait for VCS (BVSYNC) */ -#define MI_SEMAPHORE_SYNC_BVE (0<<16) /* VECS wait for BCS (VEBSYNC) */ -#define MI_SEMAPHORE_SYNC_VVE (1<<16) /* VECS wait for VCS (VEVSYNC) */ -#define MI_SEMAPHORE_SYNC_RVE (2<<16) /* VECS wait for RCS (VERSYNC) */ -#define MI_SEMAPHORE_SYNC_INVALID (3<<16) -/* - * 3D instructions used by the kernel - */ -#define GFX_INSTR(opcode, flags) ((0x3 << 29) | ((opcode) << 24) | (flags)) - -#define GFX_OP_RASTER_RULES ((0x3<<29)|(0x7<<24)) -#define GFX_OP_SCISSOR ((0x3<<29)|(0x1c<<24)|(0x10<<19)) -#define SC_UPDATE_SCISSOR (0x1<<1) -#define SC_ENABLE_MASK (0x1<<0) -#define SC_ENABLE (0x1<<0) -#define GFX_OP_LOAD_INDIRECT ((0x3<<29)|(0x1d<<24)|(0x7<<16)) -#define GFX_OP_SCISSOR_INFO ((0x3<<29)|(0x1d<<24)|(0x81<<16)|(0x1)) -#define SCI_YMIN_MASK (0xffff<<16) -#define SCI_XMIN_MASK (0xffff<<0) -#define SCI_YMAX_MASK (0xffff<<16) -#define SCI_XMAX_MASK (0xffff<<0) -#define GFX_OP_SCISSOR_ENABLE ((0x3<<29)|(0x1c<<24)|(0x10<<19)) -#define GFX_OP_SCISSOR_RECT ((0x3<<29)|(0x1d<<24)|(0x81<<16)|1) -#define GFX_OP_COLOR_FACTOR ((0x3<<29)|(0x1d<<24)|(0x1<<16)|0x0) -#define GFX_OP_STIPPLE ((0x3<<29)|(0x1d<<24)|(0x83<<16)) -#define GFX_OP_MAP_INFO ((0x3<<29)|(0x1d<<24)|0x4) -#define GFX_OP_DESTBUFFER_VARS ((0x3<<29)|(0x1d<<24)|(0x85<<16)|0x0) -#define GFX_OP_DESTBUFFER_INFO ((0x3<<29)|(0x1d<<24)|(0x8e<<16)|1) -#define GFX_OP_DRAWRECT_INFO ((0x3<<29)|(0x1d<<24)|(0x80<<16)|(0x3)) -#define GFX_OP_DRAWRECT_INFO_I965 ((0x7900<<16)|0x2) -#define SRC_COPY_BLT_CMD ((2<<29)|(0x43<<22)|4) -#define XY_SRC_COPY_BLT_CMD ((2<<29)|(0x53<<22)|6) -#define XY_MONO_SRC_COPY_IMM_BLT ((2<<29)|(0x71<<22)|5) -#define XY_SRC_COPY_BLT_WRITE_ALPHA (1<<21) -#define XY_SRC_COPY_BLT_WRITE_RGB (1<<20) -#define BLT_DEPTH_8 (0<<24) -#define BLT_DEPTH_16_565 (1<<24) -#define BLT_DEPTH_16_1555 (2<<24) -#define BLT_DEPTH_32 (3<<24) -#define BLT_ROP_GXCOPY (0xcc<<16) -#define XY_SRC_COPY_BLT_SRC_TILED (1<<15) /* 965+ only */ -#define XY_SRC_COPY_BLT_DST_TILED (1<<11) /* 965+ only */ -#define CMD_OP_DISPLAYBUFFER_INFO ((0x0<<29)|(0x14<<23)|2) -#define ASYNC_FLIP (1<<22) -#define DISPLAY_PLANE_A (0<<20) -#define DISPLAY_PLANE_B (1<<20) -#define GFX_OP_PIPE_CONTROL(len) ((0x3<<29)|(0x3<<27)|(0x2<<24)|(len-2)) -#define PIPE_CONTROL_GLOBAL_GTT_IVB (1<<24) /* gen7+ */ -#define PIPE_CONTROL_CS_STALL (1<<20) -#define PIPE_CONTROL_TLB_INVALIDATE (1<<18) -#define PIPE_CONTROL_QW_WRITE (1<<14) -#define PIPE_CONTROL_DEPTH_STALL (1<<13) -#define PIPE_CONTROL_WRITE_FLUSH (1<<12) -#define PIPE_CONTROL_RENDER_TARGET_CACHE_FLUSH (1<<12) /* gen6+ */ -#define PIPE_CONTROL_INSTRUCTION_CACHE_INVALIDATE (1<<11) /* MBZ on Ironlake */ -#define PIPE_CONTROL_TEXTURE_CACHE_INVALIDATE (1<<10) /* GM45+ only */ -#define PIPE_CONTROL_INDIRECT_STATE_DISABLE (1<<9) -#define PIPE_CONTROL_NOTIFY (1<<8) -#define PIPE_CONTROL_VF_CACHE_INVALIDATE (1<<4) -#define PIPE_CONTROL_CONST_CACHE_INVALIDATE (1<<3) -#define PIPE_CONTROL_STATE_CACHE_INVALIDATE (1<<2) -#define PIPE_CONTROL_STALL_AT_SCOREBOARD (1<<1) -#define PIPE_CONTROL_DEPTH_CACHE_FLUSH (1<<0) -#define PIPE_CONTROL_GLOBAL_GTT (1<<2) /* in addr dword */ +#include "i915_reg_defs.h" +#include "display/intel_display_reg_defs.h" +/** + * DOC: The i915 register macro definition style guide + * + * Follow the style described here for new macros, and while changing existing + * macros. Do **not** mass change existing definitions just to update the style. + * + * File Layout + * ~~~~~~~~~~~ + * + * Keep helper macros near the top. For example, _PIPE() and friends. + * + * Prefix macros that generally should not be used outside of this file with + * underscore '_'. For example, _PIPE() and friends, single instances of + * registers that are defined solely for the use by function-like macros. + * + * Avoid using the underscore prefixed macros outside of this file. There are + * exceptions, but keep them to a minimum. + * + * There are two basic types of register definitions: Single registers and + * register groups. Register groups are registers which have two or more + * instances, for example one per pipe, port, transcoder, etc. Register groups + * should be defined using function-like macros. + * + * For single registers, define the register offset first, followed by register + * contents. + * + * For register groups, define the register instance offsets first, prefixed + * with underscore, followed by a function-like macro choosing the right + * instance based on the parameter, followed by register contents. + * + * Define the register contents (i.e. bit and bit field macros) from most + * significant to least significant bit. Indent the register content macros + * using two extra spaces between ``#define`` and the macro name. + * + * Define bit fields using ``REG_GENMASK(h, l)``. Define bit field contents + * using ``REG_FIELD_PREP(mask, value)``. This will define the values already + * shifted in place, so they can be directly OR'd together. For convenience, + * function-like macros may be used to define bit fields, but do note that the + * macros may be needed to read as well as write the register contents. + * + * Define bits using ``REG_BIT(N)``. Do **not** add ``_BIT`` suffix to the name. + * + * Group the register and its contents together without blank lines, separate + * from other registers and their contents with one blank line. + * + * Indent macro values from macro names using TABs. Align values vertically. Use + * braces in macro values as needed to avoid unintended precedence after macro + * substitution. Use spaces in macro values according to kernel coding + * style. Use lower case in hexadecimal values. + * + * Naming + * ~~~~~~ + * + * Try to name registers according to the specs. If the register name changes in + * the specs from platform to another, stick to the original name. + * + * Try to reuse existing register macro definitions. Only add new macros for + * new register offsets, or when the register contents have changed enough to + * warrant a full redefinition. + * + * When a register macro changes for a new platform, prefix the new macro using + * the platform acronym or generation. For example, ``SKL_`` or ``GEN8_``. The + * prefix signifies the start platform/generation using the register. + * + * When a bit (field) macro changes or gets added for a new platform, while + * retaining the existing register macro, add a platform acronym or generation + * suffix to the name. For example, ``_SKL`` or ``_GEN8``. + * + * Examples + * ~~~~~~~~ + * + * (Note that the values in the example are indented using spaces instead of + * TABs to avoid misalignment in generated documentation. Use TABs in the + * definitions.):: + * + * #define _FOO_A 0xf000 + * #define _FOO_B 0xf001 + * #define FOO(pipe) _MMIO_PIPE(pipe, _FOO_A, _FOO_B) + * #define FOO_ENABLE REG_BIT(31) + * #define FOO_MODE_MASK REG_GENMASK(19, 16) + * #define FOO_MODE_BAR REG_FIELD_PREP(FOO_MODE_MASK, 0) + * #define FOO_MODE_BAZ REG_FIELD_PREP(FOO_MODE_MASK, 1) + * #define FOO_MODE_QUX_SNB REG_FIELD_PREP(FOO_MODE_MASK, 2) + * + * #define BAR _MMIO(0xb000) + * #define GEN8_BAR _MMIO(0xb888) + */ + +#define GU_CNTL_PROTECTED _MMIO(0x10100C) +#define DEPRESENT REG_BIT(9) + +#define GU_CNTL _MMIO(0x101010) +#define LMEM_INIT REG_BIT(7) +#define DRIVERFLR REG_BIT(31) +#define GU_DEBUG _MMIO(0x101018) +#define DRIVERFLR_STATUS REG_BIT(31) + +#define GEN6_STOLEN_RESERVED _MMIO(0x1082C0) +#define GEN6_STOLEN_RESERVED_ADDR_MASK (0xFFF << 20) +#define GEN7_STOLEN_RESERVED_ADDR_MASK (0x3FFF << 18) +#define GEN6_STOLEN_RESERVED_SIZE_MASK (3 << 4) +#define GEN6_STOLEN_RESERVED_1M (0 << 4) +#define GEN6_STOLEN_RESERVED_512K (1 << 4) +#define GEN6_STOLEN_RESERVED_256K (2 << 4) +#define GEN6_STOLEN_RESERVED_128K (3 << 4) +#define GEN7_STOLEN_RESERVED_SIZE_MASK (1 << 5) +#define GEN7_STOLEN_RESERVED_1M (0 << 5) +#define GEN7_STOLEN_RESERVED_256K (1 << 5) +#define GEN8_STOLEN_RESERVED_SIZE_MASK (3 << 7) +#define GEN8_STOLEN_RESERVED_1M (0 << 7) +#define GEN8_STOLEN_RESERVED_2M (1 << 7) +#define GEN8_STOLEN_RESERVED_4M (2 << 7) +#define GEN8_STOLEN_RESERVED_8M (3 << 7) +#define GEN6_STOLEN_RESERVED_ENABLE (1 << 0) +#define GEN11_STOLEN_RESERVED_ADDR_MASK (0xFFFFFFFFFFFULL << 20) /* * Reset registers */ -#define DEBUG_RESET_I830 0x6070 -#define DEBUG_RESET_FULL (1<<7) -#define DEBUG_RESET_RENDER (1<<8) -#define DEBUG_RESET_DISPLAY (1<<9) +#define DEBUG_RESET_I830 _MMIO(0x6070) +#define DEBUG_RESET_FULL (1 << 7) +#define DEBUG_RESET_RENDER (1 << 8) +#define DEBUG_RESET_DISPLAY (1 << 9) /* * IOSF sideband */ -#define VLV_IOSF_DOORBELL_REQ (VLV_DISPLAY_BASE + 0x2100) +#define VLV_IOSF_DOORBELL_REQ _MMIO(VLV_DISPLAY_BASE + 0x2100) #define IOSF_DEVFN_SHIFT 24 #define IOSF_OPCODE_SHIFT 16 #define IOSF_PORT_SHIFT 8 #define IOSF_BYTE_ENABLES_SHIFT 4 #define IOSF_BAR_SHIFT 1 -#define IOSF_SB_BUSY (1<<0) -#define IOSF_PORT_PUNIT 0x4 +#define IOSF_SB_BUSY (1 << 0) +#define IOSF_PORT_BUNIT 0x03 +#define IOSF_PORT_PUNIT 0x04 #define IOSF_PORT_NC 0x11 #define IOSF_PORT_DPIO 0x12 -#define VLV_IOSF_DATA (VLV_DISPLAY_BASE + 0x2104) -#define VLV_IOSF_ADDR (VLV_DISPLAY_BASE + 0x2108) - -#define PUNIT_OPCODE_REG_READ 6 -#define PUNIT_OPCODE_REG_WRITE 7 - -#define PUNIT_REG_GPU_LFM 0xd3 -#define PUNIT_REG_GPU_FREQ_REQ 0xd4 -#define PUNIT_REG_GPU_FREQ_STS 0xd8 -#define PUNIT_REG_MEDIA_TURBO_FREQ_REQ 0xdc - -#define PUNIT_FUSE_BUS2 0xf6 /* bits 47:40 */ -#define PUNIT_FUSE_BUS1 0xf5 /* bits 55:48 */ - -#define IOSF_NC_FB_GFX_FREQ_FUSE 0x1c -#define FB_GFX_MAX_FREQ_FUSE_SHIFT 3 -#define FB_GFX_MAX_FREQ_FUSE_MASK 0x000007f8 -#define FB_GFX_FGUARANTEED_FREQ_FUSE_SHIFT 11 -#define FB_GFX_FGUARANTEED_FREQ_FUSE_MASK 0x0007f800 -#define IOSF_NC_FB_GFX_FMAX_FUSE_HI 0x34 -#define FB_FMAX_VMIN_FREQ_HI_MASK 0x00000007 -#define IOSF_NC_FB_GFX_FMAX_FUSE_LO 0x30 -#define FB_FMAX_VMIN_FREQ_LO_SHIFT 27 -#define FB_FMAX_VMIN_FREQ_LO_MASK 0xf8000000 - -/* - * DPIO - a special bus for various display related registers to hide behind - * - * DPIO is VLV only. - * - * Note: digital port B is DDI0, digital pot C is DDI1 - */ +#define IOSF_PORT_GPIO_NC 0x13 +#define IOSF_PORT_CCK 0x14 +#define IOSF_PORT_DPIO_2 0x1a +#define IOSF_PORT_FLISDSI 0x1b +#define IOSF_PORT_GPIO_SC 0x48 +#define IOSF_PORT_GPIO_SUS 0xa8 +#define IOSF_PORT_CCU 0xa9 +#define CHV_IOSF_PORT_GPIO_N 0x13 +#define CHV_IOSF_PORT_GPIO_SE 0x48 +#define CHV_IOSF_PORT_GPIO_E 0xa8 +#define CHV_IOSF_PORT_GPIO_SW 0xb2 +#define VLV_IOSF_DATA _MMIO(VLV_DISPLAY_BASE + 0x2104) +#define VLV_IOSF_ADDR _MMIO(VLV_DISPLAY_BASE + 0x2108) + +/* DPIO registers */ #define DPIO_DEVFN 0 -#define DPIO_OPCODE_REG_WRITE 1 -#define DPIO_OPCODE_REG_READ 0 - -#define DPIO_CTL (VLV_DISPLAY_BASE + 0x2110) -#define DPIO_MODSEL1 (1<<3) /* if ref clk b == 27 */ -#define DPIO_MODSEL0 (1<<2) /* if ref clk a == 27 */ -#define DPIO_SFR_BYPASS (1<<1) -#define DPIO_RESET (1<<0) - -#define _DPIO_TX3_SWING_CTL4_A 0x690 -#define _DPIO_TX3_SWING_CTL4_B 0x2a90 -#define DPIO_TX3_SWING_CTL4(pipe) _PIPE(pipe, _DPIO_TX_SWING_CTL4_A, \ - _DPIO_TX3_SWING_CTL4_B) - -/* - * Per pipe/PLL DPIO regs - */ -#define _DPIO_DIV_A 0x800c -#define DPIO_POST_DIV_SHIFT (28) /* 3 bits */ -#define DPIO_POST_DIV_DAC 0 -#define DPIO_POST_DIV_HDMIDP 1 /* DAC 225-400M rate */ -#define DPIO_POST_DIV_LVDS1 2 -#define DPIO_POST_DIV_LVDS2 3 -#define DPIO_K_SHIFT (24) /* 4 bits */ -#define DPIO_P1_SHIFT (21) /* 3 bits */ -#define DPIO_P2_SHIFT (16) /* 5 bits */ -#define DPIO_N_SHIFT (12) /* 4 bits */ -#define DPIO_ENABLE_CALIBRATION (1<<11) -#define DPIO_M1DIV_SHIFT (8) /* 3 bits */ -#define DPIO_M2DIV_MASK 0xff -#define _DPIO_DIV_B 0x802c -#define DPIO_DIV(pipe) _PIPE(pipe, _DPIO_DIV_A, _DPIO_DIV_B) - -#define _DPIO_REFSFR_A 0x8014 -#define DPIO_REFSEL_OVERRIDE 27 -#define DPIO_PLL_MODESEL_SHIFT 24 /* 3 bits */ -#define DPIO_BIAS_CURRENT_CTL_SHIFT 21 /* 3 bits, always 0x7 */ -#define DPIO_PLL_REFCLK_SEL_SHIFT 16 /* 2 bits */ -#define DPIO_PLL_REFCLK_SEL_MASK 3 -#define DPIO_DRIVER_CTL_SHIFT 12 /* always set to 0x8 */ -#define DPIO_CLK_BIAS_CTL_SHIFT 8 /* always set to 0x5 */ -#define _DPIO_REFSFR_B 0x8034 -#define DPIO_REFSFR(pipe) _PIPE(pipe, _DPIO_REFSFR_A, _DPIO_REFSFR_B) - -#define _DPIO_CORE_CLK_A 0x801c -#define _DPIO_CORE_CLK_B 0x803c -#define DPIO_CORE_CLK(pipe) _PIPE(pipe, _DPIO_CORE_CLK_A, _DPIO_CORE_CLK_B) - -#define _DPIO_IREF_CTL_A 0x8040 -#define _DPIO_IREF_CTL_B 0x8060 -#define DPIO_IREF_CTL(pipe) _PIPE(pipe, _DPIO_IREF_CTL_A, _DPIO_IREF_CTL_B) - -#define DPIO_IREF_BCAST 0xc044 -#define _DPIO_IREF_A 0x8044 -#define _DPIO_IREF_B 0x8064 -#define DPIO_IREF(pipe) _PIPE(pipe, _DPIO_IREF_A, _DPIO_IREF_B) - -#define _DPIO_PLL_CML_A 0x804c -#define _DPIO_PLL_CML_B 0x806c -#define DPIO_PLL_CML(pipe) _PIPE(pipe, _DPIO_PLL_CML_A, _DPIO_PLL_CML_B) - -#define _DPIO_LPF_COEFF_A 0x8048 -#define _DPIO_LPF_COEFF_B 0x8068 -#define DPIO_LPF_COEFF(pipe) _PIPE(pipe, _DPIO_LPF_COEFF_A, _DPIO_LPF_COEFF_B) - -#define DPIO_CALIBRATION 0x80ac - -#define DPIO_FASTCLK_DISABLE 0x8100 - -/* - * Per DDI channel DPIO regs - */ - -#define _DPIO_PCS_TX_0 0x8200 -#define _DPIO_PCS_TX_1 0x8400 -#define DPIO_PCS_TX_LANE2_RESET (1<<16) -#define DPIO_PCS_TX_LANE1_RESET (1<<7) -#define DPIO_PCS_TX(port) _PORT(port, _DPIO_PCS_TX_0, _DPIO_PCS_TX_1) - -#define _DPIO_PCS_CLK_0 0x8204 -#define _DPIO_PCS_CLK_1 0x8404 -#define DPIO_PCS_CLK_CRI_RXEB_EIOS_EN (1<<22) -#define DPIO_PCS_CLK_CRI_RXDIGFILTSG_EN (1<<21) -#define DPIO_PCS_CLK_DATAWIDTH_SHIFT (6) -#define DPIO_PCS_CLK_SOFT_RESET (1<<5) -#define DPIO_PCS_CLK(port) _PORT(port, _DPIO_PCS_CLK_0, _DPIO_PCS_CLK_1) - -#define _DPIO_PCS_CTL_OVR1_A 0x8224 -#define _DPIO_PCS_CTL_OVR1_B 0x8424 -#define DPIO_PCS_CTL_OVER1(port) _PORT(port, _DPIO_PCS_CTL_OVR1_A, \ - _DPIO_PCS_CTL_OVR1_B) - -#define _DPIO_PCS_STAGGER0_A 0x822c -#define _DPIO_PCS_STAGGER0_B 0x842c -#define DPIO_PCS_STAGGER0(port) _PORT(port, _DPIO_PCS_STAGGER0_A, \ - _DPIO_PCS_STAGGER0_B) - -#define _DPIO_PCS_STAGGER1_A 0x8230 -#define _DPIO_PCS_STAGGER1_B 0x8430 -#define DPIO_PCS_STAGGER1(port) _PORT(port, _DPIO_PCS_STAGGER1_A, \ - _DPIO_PCS_STAGGER1_B) - -#define _DPIO_PCS_CLOCKBUF0_A 0x8238 -#define _DPIO_PCS_CLOCKBUF0_B 0x8438 -#define DPIO_PCS_CLOCKBUF0(port) _PORT(port, _DPIO_PCS_CLOCKBUF0_A, \ - _DPIO_PCS_CLOCKBUF0_B) - -#define _DPIO_PCS_CLOCKBUF8_A 0x825c -#define _DPIO_PCS_CLOCKBUF8_B 0x845c -#define DPIO_PCS_CLOCKBUF8(port) _PORT(port, _DPIO_PCS_CLOCKBUF8_A, \ - _DPIO_PCS_CLOCKBUF8_B) - -#define _DPIO_TX_SWING_CTL2_A 0x8288 -#define _DPIO_TX_SWING_CTL2_B 0x8488 -#define DPIO_TX_SWING_CTL2(port) _PORT(port, _DPIO_TX_SWING_CTL2_A, \ - _DPIO_TX_SWING_CTL2_B) - -#define _DPIO_TX_SWING_CTL3_A 0x828c -#define _DPIO_TX_SWING_CTL3_B 0x848c -#define DPIO_TX_SWING_CTL3(port) _PORT(port, _DPIO_TX_SWING_CTL3_A, \ - _DPIO_TX_SWING_CTL3_B) - -#define _DPIO_TX_SWING_CTL4_A 0x8290 -#define _DPIO_TX_SWING_CTL4_B 0x8490 -#define DPIO_TX_SWING_CTL4(port) _PORT(port, _DPIO_TX_SWING_CTL4_A, \ - _DPIO_TX_SWING_CTL4_B) - -#define _DPIO_TX_OCALINIT_0 0x8294 -#define _DPIO_TX_OCALINIT_1 0x8494 -#define DPIO_TX_OCALINIT_EN (1<<31) -#define DPIO_TX_OCALINIT(port) _PORT(port, _DPIO_TX_OCALINIT_0, \ - _DPIO_TX_OCALINIT_1) - -#define _DPIO_TX_CTL_0 0x82ac -#define _DPIO_TX_CTL_1 0x84ac -#define DPIO_TX_CTL(port) _PORT(port, _DPIO_TX_CTL_0, _DPIO_TX_CTL_1) - -#define _DPIO_TX_LANE_0 0x82b8 -#define _DPIO_TX_LANE_1 0x84b8 -#define DPIO_TX_LANE(port) _PORT(port, _DPIO_TX_LANE_0, _DPIO_TX_LANE_1) - -#define _DPIO_DATA_CHANNEL1 0x8220 -#define _DPIO_DATA_CHANNEL2 0x8420 -#define DPIO_DATA_CHANNEL(port) _PORT(port, _DPIO_DATA_CHANNEL1, _DPIO_DATA_CHANNEL2) - -#define _DPIO_PORT0_PCS0 0x0220 -#define _DPIO_PORT0_PCS1 0x0420 -#define _DPIO_PORT1_PCS2 0x2620 -#define _DPIO_PORT1_PCS3 0x2820 -#define DPIO_DATA_LANE_A(port) _PORT(port, _DPIO_PORT0_PCS0, _DPIO_PORT1_PCS2) -#define DPIO_DATA_LANE_B(port) _PORT(port, _DPIO_PORT0_PCS1, _DPIO_PORT1_PCS3) -#define DPIO_DATA_CHANNEL1 0x8220 -#define DPIO_DATA_CHANNEL2 0x8420 /* * Fence registers + * [0-7] @ 0x2000 gen2,gen3 + * [8-15] @ 0x3000 945,g33,pnv + * + * [0-15] @ 0x3000 gen4,gen5 + * + * [0-15] @ 0x100000 gen6,vlv,chv + * [0-31] @ 0x100000 gen7+ */ -#define FENCE_REG_830_0 0x2000 -#define FENCE_REG_945_8 0x3000 +#define FENCE_REG(i) _MMIO(0x2000 + (((i) & 8) << 9) + ((i) & 7) * 4) #define I830_FENCE_START_MASK 0x07f80000 #define I830_FENCE_TILING_Y_SHIFT 12 #define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8) #define I830_FENCE_PITCH_SHIFT 4 -#define I830_FENCE_REG_VALID (1<<0) +#define I830_FENCE_REG_VALID (1 << 0) #define I915_FENCE_MAX_PITCH_VAL 4 #define I830_FENCE_MAX_PITCH_VAL 6 -#define I830_FENCE_MAX_SIZE_VAL (1<<8) +#define I830_FENCE_MAX_SIZE_VAL (1 << 8) #define I915_FENCE_START_MASK 0x0ff00000 #define I915_FENCE_SIZE_BITS(size) ((ffs((size) >> 20) - 1) << 8) -#define FENCE_REG_965_0 0x03000 +#define FENCE_REG_965_LO(i) _MMIO(0x03000 + (i) * 8) +#define FENCE_REG_965_HI(i) _MMIO(0x03000 + (i) * 8 + 4) #define I965_FENCE_PITCH_SHIFT 2 #define I965_FENCE_TILING_Y_SHIFT 1 -#define I965_FENCE_REG_VALID (1<<0) +#define I965_FENCE_REG_VALID (1 << 0) #define I965_FENCE_MAX_PITCH_VAL 0x0400 -#define FENCE_REG_SANDYBRIDGE_0 0x100000 -#define SANDYBRIDGE_FENCE_PITCH_SHIFT 32 +#define FENCE_REG_GEN6_LO(i) _MMIO(0x100000 + (i) * 8) +#define FENCE_REG_GEN6_HI(i) _MMIO(0x100000 + (i) * 8 + 4) +#define GEN6_FENCE_PITCH_SHIFT 32 #define GEN7_FENCE_MAX_PITCH_VAL 0x0800 + /* control register for cpu gtt access */ -#define TILECTL 0x101000 +#define TILECTL _MMIO(0x101000) #define TILECTL_SWZCTL (1 << 0) +#define TILECTL_TLBPF (1 << 1) #define TILECTL_TLB_PREFETCH_DIS (1 << 2) #define TILECTL_BACKSNOOP_DIS (1 << 3) /* * Instruction and interrupt control regs */ -#define PGTBL_ER 0x02024 +#define PGTBL_CTL _MMIO(0x02020) +#define PGTBL_ADDRESS_LO_MASK 0xfffff000 /* bits [31:12] */ +#define PGTBL_ADDRESS_HI_MASK 0x000000f0 /* bits [35:32] (gen4) */ +#define PGTBL_ER _MMIO(0x02024) +#define PRB0_BASE (0x2030 - 0x30) +#define PRB1_BASE (0x2040 - 0x30) /* 830,gen3 */ +#define PRB2_BASE (0x2050 - 0x30) /* gen3 */ +#define SRB0_BASE (0x2100 - 0x30) /* gen2 */ +#define SRB1_BASE (0x2110 - 0x30) /* gen2 */ +#define SRB2_BASE (0x2120 - 0x30) /* 830 */ +#define SRB3_BASE (0x2130 - 0x30) /* 830 */ #define RENDER_RING_BASE 0x02000 #define BSD_RING_BASE 0x04000 #define GEN6_BSD_RING_BASE 0x12000 +#define GEN8_BSD2_RING_BASE 0x1c000 +#define GEN11_BSD_RING_BASE 0x1c0000 +#define GEN11_BSD2_RING_BASE 0x1c4000 +#define GEN11_BSD3_RING_BASE 0x1d0000 +#define GEN11_BSD4_RING_BASE 0x1d4000 +#define XEHP_BSD5_RING_BASE 0x1e0000 +#define XEHP_BSD6_RING_BASE 0x1e4000 +#define XEHP_BSD7_RING_BASE 0x1f0000 +#define XEHP_BSD8_RING_BASE 0x1f4000 #define VEBOX_RING_BASE 0x1a000 +#define GEN11_VEBOX_RING_BASE 0x1c8000 +#define GEN11_VEBOX2_RING_BASE 0x1d8000 +#define XEHP_VEBOX3_RING_BASE 0x1e8000 +#define XEHP_VEBOX4_RING_BASE 0x1f8000 +#define MTL_GSC_RING_BASE 0x11a000 +#define GEN12_COMPUTE0_RING_BASE 0x1a000 +#define GEN12_COMPUTE1_RING_BASE 0x1c000 +#define GEN12_COMPUTE2_RING_BASE 0x1e000 +#define GEN12_COMPUTE3_RING_BASE 0x26000 #define BLT_RING_BASE 0x22000 -#define RING_TAIL(base) ((base)+0x30) -#define RING_HEAD(base) ((base)+0x34) -#define RING_START(base) ((base)+0x38) -#define RING_CTL(base) ((base)+0x3c) -#define RING_SYNC_0(base) ((base)+0x40) -#define RING_SYNC_1(base) ((base)+0x44) -#define RING_SYNC_2(base) ((base)+0x48) -#define GEN6_RVSYNC (RING_SYNC_0(RENDER_RING_BASE)) -#define GEN6_RBSYNC (RING_SYNC_1(RENDER_RING_BASE)) -#define GEN6_RVESYNC (RING_SYNC_2(RENDER_RING_BASE)) -#define GEN6_VBSYNC (RING_SYNC_0(GEN6_BSD_RING_BASE)) -#define GEN6_VRSYNC (RING_SYNC_1(GEN6_BSD_RING_BASE)) -#define GEN6_VVESYNC (RING_SYNC_2(GEN6_BSD_RING_BASE)) -#define GEN6_BRSYNC (RING_SYNC_0(BLT_RING_BASE)) -#define GEN6_BVSYNC (RING_SYNC_1(BLT_RING_BASE)) -#define GEN6_BVESYNC (RING_SYNC_2(BLT_RING_BASE)) -#define GEN6_VEBSYNC (RING_SYNC_0(VEBOX_RING_BASE)) -#define GEN6_VERSYNC (RING_SYNC_1(VEBOX_RING_BASE)) -#define GEN6_VEVSYNC (RING_SYNC_2(VEBOX_RING_BASE)) -#define GEN6_NOSYNC 0 -#define RING_MAX_IDLE(base) ((base)+0x54) -#define RING_HWS_PGA(base) ((base)+0x80) -#define RING_HWS_PGA_GEN6(base) ((base)+0x2080) -#define ARB_MODE 0x04030 -#define ARB_MODE_SWIZZLE_SNB (1<<4) -#define ARB_MODE_SWIZZLE_IVB (1<<5) -#define RENDER_HWS_PGA_GEN7 (0x04080) -#define RING_FAULT_REG(ring) (0x4094 + 0x100*(ring)->id) -#define DONE_REG 0x40b0 -#define BSD_HWS_PGA_GEN7 (0x04180) -#define BLT_HWS_PGA_GEN7 (0x04280) -#define VEBOX_HWS_PGA_GEN7 (0x04380) -#define RING_ACTHD(base) ((base)+0x74) -#define RING_NOPID(base) ((base)+0x94) -#define RING_IMR(base) ((base)+0xa8) -#define RING_TIMESTAMP(base) ((base)+0x358) -#define TAIL_ADDR 0x001FFFF8 -#define HEAD_WRAP_COUNT 0xFFE00000 -#define HEAD_WRAP_ONE 0x00200000 -#define HEAD_ADDR 0x001FFFFC -#define RING_NR_PAGES 0x001FF000 -#define RING_REPORT_MASK 0x00000006 -#define RING_REPORT_64K 0x00000002 -#define RING_REPORT_128K 0x00000004 -#define RING_NO_REPORT 0x00000000 -#define RING_VALID_MASK 0x00000001 -#define RING_VALID 0x00000001 -#define RING_INVALID 0x00000000 -#define RING_WAIT_I8XX (1<<0) /* gen2, PRBx_HEAD */ -#define RING_WAIT (1<<11) /* gen3+, PRBx_CTL */ -#define RING_WAIT_SEMAPHORE (1<<10) /* gen6+ */ -#if 0 -#define PRB0_TAIL 0x02030 -#define PRB0_HEAD 0x02034 -#define PRB0_START 0x02038 -#define PRB0_CTL 0x0203c -#define PRB1_TAIL 0x02040 /* 915+ only */ -#define PRB1_HEAD 0x02044 /* 915+ only */ -#define PRB1_START 0x02048 /* 915+ only */ -#define PRB1_CTL 0x0204c /* 915+ only */ -#endif -#define IPEIR_I965 0x02064 -#define IPEHR_I965 0x02068 -#define INSTDONE_I965 0x0206c -#define GEN7_INSTDONE_1 0x0206c -#define GEN7_SC_INSTDONE 0x07100 -#define GEN7_SAMPLER_INSTDONE 0x0e160 -#define GEN7_ROW_INSTDONE 0x0e164 -#define I915_NUM_INSTDONE_REG 4 -#define RING_IPEIR(base) ((base)+0x64) -#define RING_IPEHR(base) ((base)+0x68) -#define RING_INSTDONE(base) ((base)+0x6c) -#define RING_INSTPS(base) ((base)+0x70) -#define RING_DMA_FADD(base) ((base)+0x78) -#define RING_INSTPM(base) ((base)+0xc0) -#define INSTPS 0x02070 /* 965+ only */ -#define INSTDONE1 0x0207c /* 965+ only */ -#define ACTHD_I965 0x02074 -#define HWS_PGA 0x02080 -#define HWS_ADDRESS_MASK 0xfffff000 -#define HWS_START_ADDRESS_SHIFT 4 -#define PWRCTXA 0x2088 /* 965GM+ only */ -#define PWRCTX_EN (1<<0) -#define IPEIR 0x02088 -#define IPEHR 0x0208c -#define INSTDONE 0x02090 -#define NOPID 0x02094 -#define HWSTAM 0x02098 -#define DMA_FADD_I8XX 0x020d0 - -#define ERROR_GEN6 0x040a0 -#define GEN7_ERR_INT 0x44040 -#define ERR_INT_POISON (1<<31) -#define ERR_INT_MMIO_UNCLAIMED (1<<13) -#define ERR_INT_FIFO_UNDERRUN_C (1<<6) -#define ERR_INT_FIFO_UNDERRUN_B (1<<3) -#define ERR_INT_FIFO_UNDERRUN_A (1<<0) - -#define FPGA_DBG 0x42300 -#define FPGA_DBG_RM_NOCLAIM (1<<31) - -#define DERRMR 0x44050 +#define XEHPC_BCS1_RING_BASE 0x3e0000 +#define XEHPC_BCS2_RING_BASE 0x3e2000 +#define XEHPC_BCS3_RING_BASE 0x3e4000 +#define XEHPC_BCS4_RING_BASE 0x3e6000 +#define XEHPC_BCS5_RING_BASE 0x3e8000 +#define XEHPC_BCS6_RING_BASE 0x3ea000 +#define XEHPC_BCS7_RING_BASE 0x3ec000 +#define XEHPC_BCS8_RING_BASE 0x3ee000 +#define DG1_GSC_HECI1_BASE 0x00258000 +#define DG1_GSC_HECI2_BASE 0x00259000 +#define DG2_GSC_HECI1_BASE 0x00373000 +#define DG2_GSC_HECI2_BASE 0x00374000 +#define MTL_GSC_HECI1_BASE 0x00116000 +#define MTL_GSC_HECI2_BASE 0x00117000 + +#define HECI_H_CSR(base) _MMIO((base) + 0x4) +#define HECI_H_CSR_IE REG_BIT(0) +#define HECI_H_CSR_IS REG_BIT(1) +#define HECI_H_CSR_IG REG_BIT(2) +#define HECI_H_CSR_RDY REG_BIT(3) +#define HECI_H_CSR_RST REG_BIT(4) + +#define HECI_H_GS1(base) _MMIO((base) + 0xc4c) +#define HECI_H_GS1_ER_PREP REG_BIT(0) -/* GM45+ chicken bits -- debug workaround bits that may be required - * for various sorts of correct behavior. The top 16 bits of each are - * the enables for writing to the corresponding low bit. - */ -#define _3D_CHICKEN 0x02084 -#define _3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB (1 << 10) -#define _3D_CHICKEN2 0x0208c -/* Disables pipelining of read flushes past the SF-WIZ interface. - * Required on all Ironlake steppings according to the B-Spec, but the - * particular danger of not doing so is not specified. - */ -# define _3D_CHICKEN2_WM_READ_PIPELINED (1 << 14) -#define _3D_CHICKEN3 0x02090 -#define _3D_CHICKEN_SF_DISABLE_OBJEND_CULL (1 << 10) -#define _3D_CHICKEN3_SF_DISABLE_FASTCLIP_CULL (1 << 5) - -#define MI_MODE 0x0209c -# define VS_TIMER_DISPATCH (1 << 6) -# define MI_FLUSH_ENABLE (1 << 12) -# define ASYNC_FLIP_PERF_DISABLE (1 << 14) - -#define GEN6_GT_MODE 0x20d0 -#define GEN6_GT_MODE_HI (1 << 9) -#define GEN6_TD_FOUR_ROW_DISPATCH_DISABLE (1 << 5) - -#define GFX_MODE 0x02520 -#define GFX_MODE_GEN7 0x0229c -#define RING_MODE_GEN7(ring) ((ring)->mmio_base+0x29c) -#define GFX_RUN_LIST_ENABLE (1<<15) -#define GFX_TLB_INVALIDATE_ALWAYS (1<<13) -#define GFX_SURFACE_FAULT_ENABLE (1<<12) -#define GFX_REPLAY_MODE (1<<11) -#define GFX_PSMI_GRANULARITY (1<<10) -#define GFX_PPGTT_ENABLE (1<<9) - -#define VLV_DISPLAY_BASE 0x180000 - -#define SCPD0 0x0209c /* 915+ only */ -#define IER 0x020a0 -#define IIR 0x020a4 -#define IMR 0x020a8 -#define ISR 0x020ac -#define VLV_GUNIT_CLOCK_GATE (VLV_DISPLAY_BASE + 0x2060) -#define GCFG_DIS (1<<8) -#define VLV_IIR_RW (VLV_DISPLAY_BASE + 0x2084) -#define VLV_IER (VLV_DISPLAY_BASE + 0x20a0) -#define VLV_IIR (VLV_DISPLAY_BASE + 0x20a4) -#define VLV_IMR (VLV_DISPLAY_BASE + 0x20a8) -#define VLV_ISR (VLV_DISPLAY_BASE + 0x20ac) -#define VLV_PCBR (VLV_DISPLAY_BASE + 0x2120) -#define DISPLAY_PLANE_FLIP_PENDING(plane) (1<<(11-(plane))) /* A and B only */ -#define EIR 0x020b0 -#define EMR 0x020b4 -#define ESR 0x020b8 -#define GM45_ERROR_PAGE_TABLE (1<<5) -#define GM45_ERROR_MEM_PRIV (1<<4) -#define I915_ERROR_PAGE_TABLE (1<<4) -#define GM45_ERROR_CP_PRIV (1<<3) -#define I915_ERROR_MEMORY_REFRESH (1<<1) -#define I915_ERROR_INSTRUCTION (1<<0) -#define INSTPM 0x020c0 -#define INSTPM_SELF_EN (1<<12) /* 915GM only */ -#define INSTPM_AGPBUSY_DIS (1<<11) /* gen3: when disabled, pending interrupts +/* + * The FWSTS register values are FW defined and can be different between + * HECI1 and HECI2 + */ +#define HECI_FWSTS1 0xc40 +#define HECI1_FWSTS1_CURRENT_STATE REG_GENMASK(3, 0) +#define HECI1_FWSTS1_CURRENT_STATE_RESET 0 +#define HECI1_FWSTS1_PROXY_STATE_NORMAL 5 +#define HECI1_FWSTS1_INIT_COMPLETE REG_BIT(9) +#define HECI_FWSTS2 0xc48 +#define HECI_FWSTS3 0xc60 +#define HECI_FWSTS4 0xc64 +#define HECI_FWSTS5 0xc68 +#define HECI1_FWSTS5_HUC_AUTH_DONE (1 << 19) +#define HECI_FWSTS6 0xc6c + +/* the FWSTS regs are 1-based, so we use -base for index 0 to get an invalid reg */ +#define HECI_FWSTS(base, x) _MMIO((base) + _PICK(x, -(base), \ + HECI_FWSTS1, \ + HECI_FWSTS2, \ + HECI_FWSTS3, \ + HECI_FWSTS4, \ + HECI_FWSTS5, \ + HECI_FWSTS6)) + +#define HSW_GTT_CACHE_EN _MMIO(0x4024) +#define GTT_CACHE_EN_ALL 0xF0007FFF +#define GEN7_WR_WATERMARK _MMIO(0x4028) +#define GEN7_GFX_PRIO_CTRL _MMIO(0x402C) +#define ARB_MODE _MMIO(0x4030) +#define ARB_MODE_SWIZZLE_SNB (1 << 4) +#define ARB_MODE_SWIZZLE_IVB (1 << 5) +#define GEN7_GFX_PEND_TLB0 _MMIO(0x4034) +#define GEN7_GFX_PEND_TLB1 _MMIO(0x4038) +/* L3, CVS, ZTLB, RCC, CASC LRA min, max values */ +#define GEN7_LRA_LIMITS(i) _MMIO(0x403C + (i) * 4) +#define GEN7_LRA_LIMITS_REG_NUM 13 +#define GEN7_MEDIA_MAX_REQ_COUNT _MMIO(0x4070) +#define GEN7_GFX_MAX_REQ_COUNT _MMIO(0x4074) + +#define GEN7_ERR_INT _MMIO(0x44040) +#define ERR_INT_POISON (1 << 31) +#define ERR_INT_INVALID_GTT_PTE (1 << 29) +#define ERR_INT_INVALID_PTE_DATA (1 << 28) +#define ERR_INT_SPRITE_C_FAULT (1 << 23) +#define ERR_INT_PRIMARY_C_FAULT (1 << 22) +#define ERR_INT_CURSOR_C_FAULT (1 << 21) +#define ERR_INT_SPRITE_B_FAULT (1 << 20) +#define ERR_INT_PRIMARY_B_FAULT (1 << 19) +#define ERR_INT_CURSOR_B_FAULT (1 << 18) +#define ERR_INT_SPRITE_A_FAULT (1 << 17) +#define ERR_INT_PRIMARY_A_FAULT (1 << 16) +#define ERR_INT_CURSOR_A_FAULT (1 << 15) +#define ERR_INT_MMIO_UNCLAIMED (1 << 13) +#define ERR_INT_PIPE_CRC_DONE_C (1 << 8) +#define ERR_INT_FIFO_UNDERRUN_C (1 << 6) +#define ERR_INT_PIPE_CRC_DONE_B (1 << 5) +#define ERR_INT_FIFO_UNDERRUN_B (1 << 3) +#define ERR_INT_PIPE_CRC_DONE_A (1 << 2) +#define ERR_INT_PIPE_CRC_DONE(pipe) (1 << (2 + (pipe) * 3)) +#define ERR_INT_FIFO_UNDERRUN_A (1 << 0) +#define ERR_INT_FIFO_UNDERRUN(pipe) (1 << ((pipe) * 3)) + +#define FPGA_DBG _MMIO(0x42300) +#define FPGA_DBG_RM_NOCLAIM REG_BIT(31) + +#define CLAIM_ER _MMIO(VLV_DISPLAY_BASE + 0x2028) +#define CLAIM_ER_CLR REG_BIT(31) +#define CLAIM_ER_OVERFLOW REG_BIT(16) +#define CLAIM_ER_CTR_MASK REG_GENMASK(15, 0) + +#define VLV_GU_CTL0 _MMIO(VLV_DISPLAY_BASE + 0x2030) +#define VLV_GU_CTL1 _MMIO(VLV_DISPLAY_BASE + 0x2034) +#define SCPD0 _MMIO(0x209c) /* 915+ only */ +#define SCPD_FBC_IGNORE_3D (1 << 6) +#define CSTATE_RENDER_CLOCK_GATE_DISABLE (1 << 5) +#define GEN2_IER _MMIO(0x20a0) +#define GEN2_IIR _MMIO(0x20a4) +#define GEN2_IMR _MMIO(0x20a8) +#define GEN2_ISR _MMIO(0x20ac) + +#define GEN2_IRQ_REGS I915_IRQ_REGS(GEN2_IMR, \ + GEN2_IER, \ + GEN2_IIR) + +#define VLV_GUNIT_CLOCK_GATE _MMIO(VLV_DISPLAY_BASE + 0x2060) +#define GINT_DIS (1 << 22) +#define GCFG_DIS (1 << 8) +#define VLV_GUNIT_CLOCK_GATE2 _MMIO(VLV_DISPLAY_BASE + 0x2064) +#define VLV_IIR_RW _MMIO(VLV_DISPLAY_BASE + 0x2084) +#define VLV_IER _MMIO(VLV_DISPLAY_BASE + 0x20a0) +#define VLV_IIR _MMIO(VLV_DISPLAY_BASE + 0x20a4) +#define VLV_IMR _MMIO(VLV_DISPLAY_BASE + 0x20a8) +#define VLV_ISR _MMIO(VLV_DISPLAY_BASE + 0x20ac) +#define VLV_PCBR _MMIO(VLV_DISPLAY_BASE + 0x2120) +#define VLV_PCBR_ADDR_SHIFT 12 + +#define EIR _MMIO(0x20b0) +#define EMR _MMIO(0x20b4) +#define ESR _MMIO(0x20b8) +#define GM45_ERROR_PAGE_TABLE (1 << 5) +#define GM45_ERROR_MEM_PRIV (1 << 4) +#define I915_ERROR_PAGE_TABLE (1 << 4) +#define GM45_ERROR_CP_PRIV (1 << 3) +#define I915_ERROR_MEMORY_REFRESH (1 << 1) +#define I915_ERROR_INSTRUCTION (1 << 0) + +#define GEN2_ERROR_REGS I915_ERROR_REGS(EMR, EIR) + +#define INSTPM _MMIO(0x20c0) +#define INSTPM_SELF_EN (1 << 12) /* 915GM only */ +#define INSTPM_AGPBUSY_INT_EN (1 << 11) /* gen3: when disabled, pending interrupts will not assert AGPBUSY# and will only be delivered when out of C3. */ -#define INSTPM_FORCE_ORDERING (1<<7) /* GEN6+ */ -#define ACTHD 0x020c8 -#define FW_BLC 0x020d8 -#define FW_BLC2 0x020dc -#define FW_BLC_SELF 0x020e0 /* 915+ only */ -#define FW_BLC_SELF_EN_MASK (1<<31) -#define FW_BLC_SELF_FIFO_MASK (1<<16) /* 945 only */ -#define FW_BLC_SELF_EN (1<<15) /* 945 only */ +#define INSTPM_FORCE_ORDERING (1 << 7) /* GEN6+ */ +#define INSTPM_TLB_INVALIDATE (1 << 9) +#define INSTPM_SYNC_FLUSH (1 << 5) +#define MEM_MODE _MMIO(0x20cc) +#define MEM_DISPLAY_B_TRICKLE_FEED_DISABLE (1 << 3) /* 830 only */ +#define MEM_DISPLAY_A_TRICKLE_FEED_DISABLE (1 << 2) /* 830/845 only */ +#define MEM_DISPLAY_TRICKLE_FEED_DISABLE (1 << 2) /* 85x only */ +#define FW_BLC _MMIO(0x20d8) +#define FW_BLC2 _MMIO(0x20dc) +#define FW_BLC_SELF _MMIO(0x20e0) /* 915+ only */ +#define FW_BLC_SELF_EN_MASK REG_BIT(31) +#define FW_BLC_SELF_FIFO_MASK REG_BIT(16) /* 945 only */ +#define FW_BLC_SELF_EN REG_BIT(15) /* 945 only */ #define MM_BURST_LENGTH 0x00700000 #define MM_FIFO_WATERMARK 0x0001F000 #define LM_BURST_LENGTH 0x00000700 #define LM_FIFO_WATERMARK 0x0000001F -#define MI_ARB_STATE 0x020e4 /* 915+ only */ +#define MI_ARB_STATE _MMIO(0x20e4) /* 915+ only */ -/* Make render/texture TLB fetches lower priorty than associated data - * fetches. This is not turned on by default +/* + * Make render/texture TLB fetches lower priority than associated data + * fetches. This is not turned on by default. */ #define MI_ARB_RENDER_TLB_LOW_PRIORITY (1 << 15) @@ -827,35 +484,9 @@ #define MI_ARB_DISPLAY_PRIORITY_A_B (0 << 0) /* display A > display B */ #define MI_ARB_DISPLAY_PRIORITY_B_A (1 << 0) /* display B > display A */ -#define CACHE_MODE_0 0x02120 /* 915+ only */ -#define CM0_PIPELINED_RENDER_FLUSH_DISABLE (1<<8) -#define CM0_IZ_OPT_DISABLE (1<<6) -#define CM0_ZR_OPT_DISABLE (1<<5) -#define CM0_STC_EVICT_DISABLE_LRA_SNB (1<<5) -#define CM0_DEPTH_EVICT_DISABLE (1<<4) -#define CM0_COLOR_EVICT_DISABLE (1<<3) -#define CM0_DEPTH_WRITE_DISABLE (1<<1) -#define CM0_RC_OP_FLUSH_DISABLE (1<<0) -#define BB_ADDR 0x02140 /* 8 bytes */ -#define GFX_FLSH_CNTL 0x02170 /* 915+ only */ -#define GFX_FLSH_CNTL_GEN6 0x101008 -#define GFX_FLSH_CNTL_EN (1<<0) -#define ECOSKPD 0x021d0 -#define ECO_GATING_CX_ONLY (1<<3) -#define ECO_FLIP_DONE (1<<0) - -#define CACHE_MODE_1 0x7004 /* IVB+ */ -#define PIXEL_SUBSPAN_COLLECT_OPT_DISABLE (1<<6) - -#define GEN6_BLITTER_ECOSKPD 0x221d0 -#define GEN6_BLITTER_LOCK_SHIFT 16 -#define GEN6_BLITTER_FBC_NOTIFY (1<<3) - -#define GEN6_BSD_SLEEP_PSMI_CONTROL 0x12050 -#define GEN6_BSD_SLEEP_MSG_DISABLE (1 << 0) -#define GEN6_BSD_SLEEP_FLUSH_DISABLE (1 << 2) -#define GEN6_BSD_SLEEP_INDICATOR (1 << 3) -#define GEN6_BSD_GO_INDICATOR (1 << 4) +#define MI_STATE _MMIO(0x20e4) /* gen2 only */ +#define MI_AGPBUSY_INT_EN (1 << 1) /* 85x only */ +#define MI_AGPBUSY_830_MODE (1 << 0) /* 85x only */ /* On modern GEN architectures interrupt control consists of two sets * of registers. The first set pertains to the ring generating the @@ -873,9 +504,12 @@ #define GT_BLT_USER_INTERRUPT (1 << 22) #define GT_BSD_CS_ERROR_INTERRUPT (1 << 15) #define GT_BSD_USER_INTERRUPT (1 << 12) +#define GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1 (1 << 11) /* hsw+; rsvd on snb, ivb, vlv */ +#define GT_WAIT_SEMAPHORE_INTERRUPT REG_BIT(11) /* bdw+ */ +#define GT_CONTEXT_SWITCH_INTERRUPT (1 << 8) #define GT_RENDER_L3_PARITY_ERROR_INTERRUPT (1 << 5) /* !snb */ #define GT_RENDER_PIPECTL_NOTIFY_INTERRUPT (1 << 4) -#define GT_RENDER_CS_MASTER_ERROR_INTERRUPT (1 << 3) +#define GT_CS_MASTER_ERROR_INTERRUPT REG_BIT(3) #define GT_RENDER_SYNC_STATUS_INTERRUPT (1 << 2) #define GT_RENDER_DEBUG_INTERRUPT (1 << 1) #define GT_RENDER_USER_INTERRUPT (1 << 0) @@ -883,362 +517,85 @@ #define PM_VEBOX_CS_ERROR_INTERRUPT (1 << 12) /* hsw+ */ #define PM_VEBOX_USER_INTERRUPT (1 << 10) /* hsw+ */ +#define GT_PARITY_ERROR(dev_priv) \ + (GT_RENDER_L3_PARITY_ERROR_INTERRUPT | \ + (IS_HASWELL(dev_priv) ? GT_RENDER_L3_PARITY_ERROR_INTERRUPT_S1 : 0)) + /* These are all the "old" interrupts */ -#define ILK_BSD_USER_INTERRUPT (1<<5) -#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1<<18) -#define I915_DISPLAY_PORT_INTERRUPT (1<<17) -#define I915_RENDER_COMMAND_PARSER_ERROR_INTERRUPT (1<<15) -#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1<<14) /* p-state */ -#define I915_HWB_OOM_INTERRUPT (1<<13) -#define I915_SYNC_STATUS_INTERRUPT (1<<12) -#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1<<11) -#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1<<10) -#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1<<9) -#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1<<8) -#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1<<7) -#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1<<6) -#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1<<5) -#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1<<4) -#define I915_DEBUG_INTERRUPT (1<<2) -#define I915_USER_INTERRUPT (1<<1) -#define I915_ASLE_INTERRUPT (1<<0) +#define ILK_BSD_USER_INTERRUPT (1 << 5) + +#define I915_PM_INTERRUPT (1 << 31) +#define I915_ISP_INTERRUPT (1 << 22) +#define I915_LPE_PIPE_B_INTERRUPT (1 << 21) +#define I915_LPE_PIPE_A_INTERRUPT (1 << 20) +#define I915_MIPIC_INTERRUPT (1 << 19) +#define I915_MIPIA_INTERRUPT (1 << 18) +#define I915_PIPE_CONTROL_NOTIFY_INTERRUPT (1 << 18) +#define I915_DISPLAY_PORT_INTERRUPT (1 << 17) +#define I915_DISPLAY_PIPE_C_HBLANK_INTERRUPT (1 << 16) +#define I915_MASTER_ERROR_INTERRUPT (1 << 15) +#define I915_DISPLAY_PIPE_B_HBLANK_INTERRUPT (1 << 14) +#define I915_GMCH_THERMAL_SENSOR_EVENT_INTERRUPT (1 << 14) /* p-state */ +#define I915_DISPLAY_PIPE_A_HBLANK_INTERRUPT (1 << 13) +#define I915_HWB_OOM_INTERRUPT (1 << 13) +#define I915_LPE_PIPE_C_INTERRUPT (1 << 12) +#define I915_SYNC_STATUS_INTERRUPT (1 << 12) +#define I915_MISC_INTERRUPT (1 << 11) +#define I915_DISPLAY_PLANE_A_FLIP_PENDING_INTERRUPT (1 << 11) +#define I915_DISPLAY_PIPE_C_VBLANK_INTERRUPT (1 << 10) +#define I915_DISPLAY_PLANE_B_FLIP_PENDING_INTERRUPT (1 << 10) +#define I915_DISPLAY_PIPE_C_EVENT_INTERRUPT (1 << 9) +#define I915_OVERLAY_PLANE_FLIP_PENDING_INTERRUPT (1 << 9) +#define I915_DISPLAY_PIPE_C_DPBM_INTERRUPT (1 << 8) +#define I915_DISPLAY_PLANE_C_FLIP_PENDING_INTERRUPT (1 << 8) +#define I915_DISPLAY_PIPE_A_VBLANK_INTERRUPT (1 << 7) +#define I915_DISPLAY_PIPE_A_EVENT_INTERRUPT (1 << 6) +#define I915_DISPLAY_PIPE_B_VBLANK_INTERRUPT (1 << 5) +#define I915_DISPLAY_PIPE_B_EVENT_INTERRUPT (1 << 4) +#define I915_DISPLAY_PIPE_A_DPBM_INTERRUPT (1 << 3) +#define I915_DISPLAY_PIPE_B_DPBM_INTERRUPT (1 << 2) +#define I915_DEBUG_INTERRUPT (1 << 2) +#define I915_WINVALID_INTERRUPT (1 << 1) +#define I915_USER_INTERRUPT (1 << 1) +#define I915_ASLE_INTERRUPT (1 << 0) #define I915_BSD_USER_INTERRUPT (1 << 25) -#define GEN6_BSD_RNCID 0x12198 +#define GEN6_BSD_RNCID _MMIO(0x12198) -#define GEN7_FF_THREAD_MODE 0x20a0 +#define GEN7_FF_THREAD_MODE _MMIO(0x20a0) #define GEN7_FF_SCHED_MASK 0x0077070 -#define GEN7_FF_TS_SCHED_HS1 (0x5<<16) -#define GEN7_FF_TS_SCHED_HS0 (0x3<<16) -#define GEN7_FF_TS_SCHED_LOAD_BALANCE (0x1<<16) -#define GEN7_FF_TS_SCHED_HW (0x0<<16) /* Default */ +#define GEN8_FF_DS_REF_CNT_FFME (1 << 19) +#define GEN12_FF_TESSELATION_DOP_GATE_DISABLE BIT(19) +#define GEN7_FF_TS_SCHED_HS1 (0x5 << 16) +#define GEN7_FF_TS_SCHED_HS0 (0x3 << 16) +#define GEN7_FF_TS_SCHED_LOAD_BALANCE (0x1 << 16) +#define GEN7_FF_TS_SCHED_HW (0x0 << 16) /* Default */ #define GEN7_FF_VS_REF_CNT_FFME (1 << 15) -#define GEN7_FF_VS_SCHED_HS1 (0x5<<12) -#define GEN7_FF_VS_SCHED_HS0 (0x3<<12) -#define GEN7_FF_VS_SCHED_LOAD_BALANCE (0x1<<12) /* Default */ -#define GEN7_FF_VS_SCHED_HW (0x0<<12) -#define GEN7_FF_DS_SCHED_HS1 (0x5<<4) -#define GEN7_FF_DS_SCHED_HS0 (0x3<<4) -#define GEN7_FF_DS_SCHED_LOAD_BALANCE (0x1<<4) /* Default */ -#define GEN7_FF_DS_SCHED_HW (0x0<<4) - -/* - * Framebuffer compression (915+ only) - */ - -#define FBC_CFB_BASE 0x03200 /* 4k page aligned */ -#define FBC_LL_BASE 0x03204 /* 4k page aligned */ -#define FBC_CONTROL 0x03208 -#define FBC_CTL_EN (1<<31) -#define FBC_CTL_PERIODIC (1<<30) -#define FBC_CTL_INTERVAL_SHIFT (16) -#define FBC_CTL_UNCOMPRESSIBLE (1<<14) -#define FBC_CTL_C3_IDLE (1<<13) -#define FBC_CTL_STRIDE_SHIFT (5) -#define FBC_CTL_FENCENO (1<<0) -#define FBC_COMMAND 0x0320c -#define FBC_CMD_COMPRESS (1<<0) -#define FBC_STATUS 0x03210 -#define FBC_STAT_COMPRESSING (1<<31) -#define FBC_STAT_COMPRESSED (1<<30) -#define FBC_STAT_MODIFIED (1<<29) -#define FBC_STAT_CURRENT_LINE (1<<0) -#define FBC_CONTROL2 0x03214 -#define FBC_CTL_FENCE_DBL (0<<4) -#define FBC_CTL_IDLE_IMM (0<<2) -#define FBC_CTL_IDLE_FULL (1<<2) -#define FBC_CTL_IDLE_LINE (2<<2) -#define FBC_CTL_IDLE_DEBUG (3<<2) -#define FBC_CTL_CPU_FENCE (1<<1) -#define FBC_CTL_PLANEA (0<<0) -#define FBC_CTL_PLANEB (1<<0) -#define FBC_FENCE_OFF 0x0321b -#define FBC_TAG 0x03300 - -#define FBC_LL_SIZE (1536) - -/* Framebuffer compression for GM45+ */ -#define DPFC_CB_BASE 0x3200 -#define DPFC_CONTROL 0x3208 -#define DPFC_CTL_EN (1<<31) -#define DPFC_CTL_PLANEA (0<<30) -#define DPFC_CTL_PLANEB (1<<30) -#define IVB_DPFC_CTL_PLANE_SHIFT (29) -#define DPFC_CTL_FENCE_EN (1<<29) -#define IVB_DPFC_CTL_FENCE_EN (1<<28) -#define DPFC_CTL_PERSISTENT_MODE (1<<25) -#define DPFC_SR_EN (1<<10) -#define DPFC_CTL_LIMIT_1X (0<<6) -#define DPFC_CTL_LIMIT_2X (1<<6) -#define DPFC_CTL_LIMIT_4X (2<<6) -#define DPFC_RECOMP_CTL 0x320c -#define DPFC_RECOMP_STALL_EN (1<<27) -#define DPFC_RECOMP_STALL_WM_SHIFT (16) -#define DPFC_RECOMP_STALL_WM_MASK (0x07ff0000) -#define DPFC_RECOMP_TIMER_COUNT_SHIFT (0) -#define DPFC_RECOMP_TIMER_COUNT_MASK (0x0000003f) -#define DPFC_STATUS 0x3210 -#define DPFC_INVAL_SEG_SHIFT (16) -#define DPFC_INVAL_SEG_MASK (0x07ff0000) -#define DPFC_COMP_SEG_SHIFT (0) -#define DPFC_COMP_SEG_MASK (0x000003ff) -#define DPFC_STATUS2 0x3214 -#define DPFC_FENCE_YOFF 0x3218 -#define DPFC_CHICKEN 0x3224 -#define DPFC_HT_MODIFY (1<<31) - -/* Framebuffer compression for Ironlake */ -#define ILK_DPFC_CB_BASE 0x43200 -#define ILK_DPFC_CONTROL 0x43208 -/* The bit 28-8 is reserved */ -#define DPFC_RESERVED (0x1FFFFF00) -#define ILK_DPFC_RECOMP_CTL 0x4320c -#define ILK_DPFC_STATUS 0x43210 -#define ILK_DPFC_FENCE_YOFF 0x43218 -#define ILK_DPFC_CHICKEN 0x43224 -#define ILK_FBC_RT_BASE 0x2128 -#define ILK_FBC_RT_VALID (1<<0) -#define SNB_FBC_FRONT_BUFFER (1<<1) - -#define ILK_DISPLAY_CHICKEN1 0x42000 -#define ILK_FBCQ_DIS (1<<22) -#define ILK_PABSTRETCH_DIS (1<<21) - - -/* - * Framebuffer compression for Sandybridge - * - * The following two registers are of type GTTMMADR - */ -#define SNB_DPFC_CTL_SA 0x100100 -#define SNB_CPU_FENCE_ENABLE (1<<29) -#define DPFC_CPU_FENCE_OFFSET 0x100104 - -/* Framebuffer compression for Ivybridge */ -#define IVB_FBC_RT_BASE 0x7020 - -#define IPS_CTL 0x43408 -#define IPS_ENABLE (1 << 31) - -#define MSG_FBC_REND_STATE 0x50380 -#define FBC_REND_NUKE (1<<2) -#define FBC_REND_CACHE_CLEAN (1<<1) - -#define _HSW_PIPE_SLICE_CHICKEN_1_A 0x420B0 -#define _HSW_PIPE_SLICE_CHICKEN_1_B 0x420B4 -#define HSW_BYPASS_FBC_QUEUE (1<<22) -#define HSW_PIPE_SLICE_CHICKEN_1(pipe) _PIPE(pipe, + \ - _HSW_PIPE_SLICE_CHICKEN_1_A, + \ - _HSW_PIPE_SLICE_CHICKEN_1_B) - -#define HSW_CLKGATE_DISABLE_PART_1 0x46500 -#define HSW_DPFC_GATING_DISABLE (1<<23) - -/* - * GPIO regs - */ -#define GPIOA 0x5010 -#define GPIOB 0x5014 -#define GPIOC 0x5018 -#define GPIOD 0x501c -#define GPIOE 0x5020 -#define GPIOF 0x5024 -#define GPIOG 0x5028 -#define GPIOH 0x502c -# define GPIO_CLOCK_DIR_MASK (1 << 0) -# define GPIO_CLOCK_DIR_IN (0 << 1) -# define GPIO_CLOCK_DIR_OUT (1 << 1) -# define GPIO_CLOCK_VAL_MASK (1 << 2) -# define GPIO_CLOCK_VAL_OUT (1 << 3) -# define GPIO_CLOCK_VAL_IN (1 << 4) -# define GPIO_CLOCK_PULLUP_DISABLE (1 << 5) -# define GPIO_DATA_DIR_MASK (1 << 8) -# define GPIO_DATA_DIR_IN (0 << 9) -# define GPIO_DATA_DIR_OUT (1 << 9) -# define GPIO_DATA_VAL_MASK (1 << 10) -# define GPIO_DATA_VAL_OUT (1 << 11) -# define GPIO_DATA_VAL_IN (1 << 12) -# define GPIO_DATA_PULLUP_DISABLE (1 << 13) - -#define GMBUS0 0x5100 /* clock/port select */ -#define GMBUS_RATE_100KHZ (0<<8) -#define GMBUS_RATE_50KHZ (1<<8) -#define GMBUS_RATE_400KHZ (2<<8) /* reserved on Pineview */ -#define GMBUS_RATE_1MHZ (3<<8) /* reserved on Pineview */ -#define GMBUS_HOLD_EXT (1<<7) /* 300ns hold time, rsvd on Pineview */ -#define GMBUS_PORT_DISABLED 0 -#define GMBUS_PORT_SSC 1 -#define GMBUS_PORT_VGADDC 2 -#define GMBUS_PORT_PANEL 3 -#define GMBUS_PORT_DPC 4 /* HDMIC */ -#define GMBUS_PORT_DPB 5 /* SDVO, HDMIB */ -#define GMBUS_PORT_DPD 6 /* HDMID */ -#define GMBUS_PORT_RESERVED 7 /* 7 reserved */ -#define GMBUS_NUM_PORTS (GMBUS_PORT_DPD - GMBUS_PORT_SSC + 1) -#define GMBUS1 0x5104 /* command/status */ -#define GMBUS_SW_CLR_INT (1<<31) -#define GMBUS_SW_RDY (1<<30) -#define GMBUS_ENT (1<<29) /* enable timeout */ -#define GMBUS_CYCLE_NONE (0<<25) -#define GMBUS_CYCLE_WAIT (1<<25) -#define GMBUS_CYCLE_INDEX (2<<25) -#define GMBUS_CYCLE_STOP (4<<25) -#define GMBUS_BYTE_COUNT_SHIFT 16 -#define GMBUS_SLAVE_INDEX_SHIFT 8 -#define GMBUS_SLAVE_ADDR_SHIFT 1 -#define GMBUS_SLAVE_READ (1<<0) -#define GMBUS_SLAVE_WRITE (0<<0) -#define GMBUS2 0x5108 /* status */ -#define GMBUS_INUSE (1<<15) -#define GMBUS_HW_WAIT_PHASE (1<<14) -#define GMBUS_STALL_TIMEOUT (1<<13) -#define GMBUS_INT (1<<12) -#define GMBUS_HW_RDY (1<<11) -#define GMBUS_SATOER (1<<10) -#define GMBUS_ACTIVE (1<<9) -#define GMBUS3 0x510c /* data buffer bytes 3-0 */ -#define GMBUS4 0x5110 /* interrupt mask (Pineview+) */ -#define GMBUS_SLAVE_TIMEOUT_EN (1<<4) -#define GMBUS_NAK_EN (1<<3) -#define GMBUS_IDLE_EN (1<<2) -#define GMBUS_HW_WAIT_EN (1<<1) -#define GMBUS_HW_RDY_EN (1<<0) -#define GMBUS5 0x5120 /* byte index */ -#define GMBUS_2BYTE_INDEX_EN (1<<31) - -/* - * Clock control & power management - */ - -#define VGA0 0x6000 -#define VGA1 0x6004 -#define VGA_PD 0x6010 -#define VGA0_PD_P2_DIV_4 (1 << 7) -#define VGA0_PD_P1_DIV_2 (1 << 5) -#define VGA0_PD_P1_SHIFT 0 -#define VGA0_PD_P1_MASK (0x1f << 0) -#define VGA1_PD_P2_DIV_4 (1 << 15) -#define VGA1_PD_P1_DIV_2 (1 << 13) -#define VGA1_PD_P1_SHIFT 8 -#define VGA1_PD_P1_MASK (0x1f << 8) -#define _DPLL_A (dev_priv->info->display_mmio_offset + 0x6014) -#define _DPLL_B (dev_priv->info->display_mmio_offset + 0x6018) -#define DPLL(pipe) _PIPE(pipe, _DPLL_A, _DPLL_B) -#define DPLL_VCO_ENABLE (1 << 31) -#define DPLL_DVO_HIGH_SPEED (1 << 30) -#define DPLL_EXT_BUFFER_ENABLE_VLV (1 << 30) -#define DPLL_SYNCLOCK_ENABLE (1 << 29) -#define DPLL_REFA_CLK_ENABLE_VLV (1 << 29) -#define DPLL_VGA_MODE_DIS (1 << 28) -#define DPLLB_MODE_DAC_SERIAL (1 << 26) /* i915 */ -#define DPLLB_MODE_LVDS (2 << 26) /* i915 */ -#define DPLL_MODE_MASK (3 << 26) -#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_10 (0 << 24) /* i915 */ -#define DPLL_DAC_SERIAL_P2_CLOCK_DIV_5 (1 << 24) /* i915 */ -#define DPLLB_LVDS_P2_CLOCK_DIV_14 (0 << 24) /* i915 */ -#define DPLLB_LVDS_P2_CLOCK_DIV_7 (1 << 24) /* i915 */ -#define DPLL_P2_CLOCK_DIV_MASK 0x03000000 /* i915 */ -#define DPLL_FPA01_P1_POST_DIV_MASK 0x00ff0000 /* i915 */ -#define DPLL_FPA01_P1_POST_DIV_MASK_PINEVIEW 0x00ff8000 /* Pineview */ -#define DPLL_LOCK_VLV (1<<15) -#define DPLL_INTEGRATED_CRI_CLK_VLV (1<<14) -#define DPLL_INTEGRATED_CLOCK_VLV (1<<13) -#define DPLL_PORTC_READY_MASK (0xf << 4) -#define DPLL_PORTB_READY_MASK (0xf) - -#define DPLL_FPA01_P1_POST_DIV_MASK_I830 0x001f0000 -/* - * The i830 generation, in LVDS mode, defines P1 as the bit number set within - * this field (only one bit may be set). - */ -#define DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS 0x003f0000 -#define DPLL_FPA01_P1_POST_DIV_SHIFT 16 -#define DPLL_FPA01_P1_POST_DIV_SHIFT_PINEVIEW 15 -/* i830, required in DVO non-gang */ -#define PLL_P2_DIVIDE_BY_4 (1 << 23) -#define PLL_P1_DIVIDE_BY_TWO (1 << 21) /* i830 */ -#define PLL_REF_INPUT_DREFCLK (0 << 13) -#define PLL_REF_INPUT_TVCLKINA (1 << 13) /* i830 */ -#define PLL_REF_INPUT_TVCLKINBC (2 << 13) /* SDVO TVCLKIN */ -#define PLLB_REF_INPUT_SPREADSPECTRUMIN (3 << 13) -#define PLL_REF_INPUT_MASK (3 << 13) -#define PLL_LOAD_PULSE_PHASE_SHIFT 9 -/* Ironlake */ -# define PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT 9 -# define PLL_REF_SDVO_HDMI_MULTIPLIER_MASK (7 << 9) -# define PLL_REF_SDVO_HDMI_MULTIPLIER(x) (((x)-1) << 9) -# define DPLL_FPA1_P1_POST_DIV_SHIFT 0 -# define DPLL_FPA1_P1_POST_DIV_MASK 0xff - -/* - * Parallel to Serial Load Pulse phase selection. - * Selects the phase for the 10X DPLL clock for the PCIe - * digital display port. The range is 4 to 13; 10 or more - * is just a flip delay. The default is 6 - */ -#define PLL_LOAD_PULSE_PHASE_MASK (0xf << PLL_LOAD_PULSE_PHASE_SHIFT) -#define DISPLAY_RATE_SELECT_FPA1 (1 << 8) -/* - * SDVO multiplier for 945G/GM. Not used on 965. - */ -#define SDVO_MULTIPLIER_MASK 0x000000ff -#define SDVO_MULTIPLIER_SHIFT_HIRES 4 -#define SDVO_MULTIPLIER_SHIFT_VGA 0 -#define _DPLL_A_MD (dev_priv->info->display_mmio_offset + 0x601c) /* 965+ only */ -/* - * UDI pixel divider, controlling how many pixels are stuffed into a packet. - * - * Value is pixels minus 1. Must be set to 1 pixel for SDVO. - */ -#define DPLL_MD_UDI_DIVIDER_MASK 0x3f000000 -#define DPLL_MD_UDI_DIVIDER_SHIFT 24 -/* UDI pixel divider for VGA, same as DPLL_MD_UDI_DIVIDER_MASK. */ -#define DPLL_MD_VGA_UDI_DIVIDER_MASK 0x003f0000 -#define DPLL_MD_VGA_UDI_DIVIDER_SHIFT 16 -/* - * SDVO/UDI pixel multiplier. - * - * SDVO requires that the bus clock rate be between 1 and 2 Ghz, and the bus - * clock rate is 10 times the DPLL clock. At low resolution/refresh rate - * modes, the bus rate would be below the limits, so SDVO allows for stuffing - * dummy bytes in the datastream at an increased clock rate, with both sides of - * the link knowing how many bytes are fill. - * - * So, for a mode with a dotclock of 65Mhz, we would want to double the clock - * rate to 130Mhz to get a bus rate of 1.30Ghz. The DPLL clock rate would be - * set to 130Mhz, and the SDVO multiplier set to 2x in this register and - * through an SDVO command. - * - * This register field has values of multiplication factor minus 1, with - * a maximum multiplier of 5 for SDVO. - */ -#define DPLL_MD_UDI_MULTIPLIER_MASK 0x00003f00 -#define DPLL_MD_UDI_MULTIPLIER_SHIFT 8 -/* - * SDVO/UDI pixel multiplier for VGA, same as DPLL_MD_UDI_MULTIPLIER_MASK. - * This best be set to the default value (3) or the CRT won't work. No, - * I don't entirely understand what this does... - */ -#define DPLL_MD_VGA_UDI_MULTIPLIER_MASK 0x0000003f -#define DPLL_MD_VGA_UDI_MULTIPLIER_SHIFT 0 -#define _DPLL_B_MD (dev_priv->info->display_mmio_offset + 0x6020) /* 965+ only */ -#define DPLL_MD(pipe) _PIPE(pipe, _DPLL_A_MD, _DPLL_B_MD) - -#define _FPA0 0x06040 -#define _FPA1 0x06044 -#define _FPB0 0x06048 -#define _FPB1 0x0604c -#define FP0(pipe) _PIPE(pipe, _FPA0, _FPB0) -#define FP1(pipe) _PIPE(pipe, _FPA1, _FPB1) -#define FP_N_DIV_MASK 0x003f0000 -#define FP_N_PINEVIEW_DIV_MASK 0x00ff0000 -#define FP_N_DIV_SHIFT 16 -#define FP_M1_DIV_MASK 0x00003f00 -#define FP_M1_DIV_SHIFT 8 -#define FP_M2_DIV_MASK 0x0000003f -#define FP_M2_PINEVIEW_DIV_MASK 0x000000ff -#define FP_M2_DIV_SHIFT 0 -#define DPLL_TEST 0x606c +#define GEN7_FF_VS_SCHED_HS1 (0x5 << 12) +#define GEN7_FF_VS_SCHED_HS0 (0x3 << 12) +#define GEN7_FF_VS_SCHED_LOAD_BALANCE (0x1 << 12) /* Default */ +#define GEN7_FF_VS_SCHED_HW (0x0 << 12) +#define GEN7_FF_DS_SCHED_HS1 (0x5 << 4) +#define GEN7_FF_DS_SCHED_HS0 (0x3 << 4) +#define GEN7_FF_DS_SCHED_LOAD_BALANCE (0x1 << 4) /* Default */ +#define GEN7_FF_DS_SCHED_HW (0x0 << 4) + +#define ILK_DISPLAY_CHICKEN1 _MMIO(0x42000) +#define ILK_FBCQ_DIS REG_BIT(22) +#define ILK_PABSTRETCH_DIS REG_BIT(21) +#define ILK_SABSTRETCH_DIS REG_BIT(20) +#define IVB_PRI_STRETCH_MAX_MASK REG_GENMASK(21, 20) +#define IVB_PRI_STRETCH_MAX_X8 REG_FIELD_PREP(IVB_PRI_STRETCH_MAX_MASK, 0) +#define IVB_PRI_STRETCH_MAX_X4 REG_FIELD_PREP(IVB_PRI_STRETCH_MAX_MASK, 1) +#define IVB_PRI_STRETCH_MAX_X2 REG_FIELD_PREP(IVB_PRI_STRETCH_MAX_MASK, 2) +#define IVB_PRI_STRETCH_MAX_X1 REG_FIELD_PREP(IVB_PRI_STRETCH_MAX_MASK, 3) +#define IVB_SPR_STRETCH_MAX_MASK REG_GENMASK(19, 18) +#define IVB_SPR_STRETCH_MAX_X8 REG_FIELD_PREP(IVB_SPR_STRETCH_MAX_MASK, 0) +#define IVB_SPR_STRETCH_MAX_X4 REG_FIELD_PREP(IVB_SPR_STRETCH_MAX_MASK, 1) +#define IVB_SPR_STRETCH_MAX_X2 REG_FIELD_PREP(IVB_SPR_STRETCH_MAX_MASK, 2) +#define IVB_SPR_STRETCH_MAX_X1 REG_FIELD_PREP(IVB_SPR_STRETCH_MAX_MASK, 3) + +#define DPLL_TEST _MMIO(0x606c) #define DPLLB_TEST_SDVO_DIV_1 (0 << 22) #define DPLLB_TEST_SDVO_DIV_2 (1 << 22) #define DPLLB_TEST_SDVO_DIV_4 (2 << 22) @@ -1249,12 +606,15 @@ #define DPLLA_TEST_N_BYPASS (1 << 3) #define DPLLA_TEST_M_BYPASS (1 << 2) #define DPLLA_INPUT_BUFFER_ENABLE (1 << 0) -#define D_STATE 0x6104 -#define DSTATE_GFX_RESET_I830 (1<<6) -#define DSTATE_PLL_D3_OFF (1<<3) -#define DSTATE_GFX_CLOCK_GATING (1<<1) -#define DSTATE_DOT_CLOCK_GATING (1<<0) -#define DSPCLK_GATE_D (dev_priv->info->display_mmio_offset + 0x6200) + +#define D_STATE _MMIO(0x6104) +#define DSTATE_GFX_RESET_I830 (1 << 6) +#define DSTATE_PLL_D3_OFF (1 << 3) +#define DSTATE_GFX_CLOCK_GATING (1 << 1) +#define DSTATE_DOT_CLOCK_GATING (1 << 0) + +#define DSPCLK_GATE_D _MMIO(0x6200) +#define VLV_DSPCLK_GATE_D _MMIO(VLV_DISPLAY_BASE + 0x6200) # define DPUNIT_B_CLOCK_GATE_DISABLE (1 << 30) /* 965 */ # define VSUNIT_CLOCK_GATE_DISABLE (1 << 29) /* 965 */ # define VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) /* 965 */ @@ -1262,6 +622,7 @@ # define AUDUNIT_CLOCK_GATE_DISABLE (1 << 26) /* 965 */ # define DPUNIT_A_CLOCK_GATE_DISABLE (1 << 25) /* 965 */ # define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24) /* 965 */ +# define PNV_GMBUSUNIT_CLOCK_GATE_DISABLE (1 << 24) /* pnv */ # define TVRUNIT_CLOCK_GATE_DISABLE (1 << 23) /* 915-945 */ # define TVCUNIT_CLOCK_GATE_DISABLE (1 << 22) /* 915-945 */ # define TVFUNIT_CLOCK_GATE_DISABLE (1 << 21) /* 915-945 */ @@ -1283,7 +644,7 @@ # define DPIOUNIT_CLOCK_GATE_DISABLE (1 << 6) /* 915-945 */ # define OVFUNIT_CLOCK_GATE_DISABLE (1 << 5) # define OVBUNIT_CLOCK_GATE_DISABLE (1 << 4) -/** +/* * This bit must be set on the 830 to prevent hangs when turning off the * overlay scaler. */ @@ -1293,7 +654,7 @@ # define ZVUNIT_CLOCK_GATE_DISABLE (1 << 0) /* 830 */ # define OVLUNIT_CLOCK_GATE_DISABLE (1 << 0) /* 845,865 */ -#define RENCLK_GATE_D1 0x6204 +#define RENCLK_GATE_D1 _MMIO(0x6204) # define BLITTER_CLOCK_GATE_DISABLE (1 << 13) /* 945GM only */ # define MPEG_CLOCK_GATE_DISABLE (1 << 12) /* 945GM only */ # define PC_FE_CLOCK_GATE_DISABLE (1 << 11) @@ -1303,12 +664,12 @@ # define COLOR_CALCULATOR_CLOCK_GATE_DISABLE (1 << 7) # define MOTION_COMP_CLOCK_GATE_DISABLE (1 << 6) # define MAG_CLOCK_GATE_DISABLE (1 << 5) -/** This bit must be unset on 855,865 */ +/* This bit must be unset on 855,865 */ # define MECI_CLOCK_GATE_DISABLE (1 << 4) # define DCMP_CLOCK_GATE_DISABLE (1 << 3) # define MEC_CLOCK_GATE_DISABLE (1 << 2) # define MECO_CLOCK_GATE_DISABLE (1 << 1) -/** This bit must be set on 855,865. */ +/* This bit must be set on 855,865. */ # define SV_CLOCK_GATE_DISABLE (1 << 0) # define I915_MPEG_CLOCK_GATE_DISABLE (1 << 16) # define I915_VLD_IP_PR_CLOCK_GATE_DISABLE (1 << 15) @@ -1329,14 +690,14 @@ # define I915_BY_CLOCK_GATE_DISABLE (1 << 0) # define I965_RCZ_CLOCK_GATE_DISABLE (1 << 30) -/** This bit must always be set on 965G/965GM */ +/* This bit must always be set on 965G/965GM */ # define I965_RCC_CLOCK_GATE_DISABLE (1 << 29) # define I965_RCPB_CLOCK_GATE_DISABLE (1 << 28) # define I965_DAP_CLOCK_GATE_DISABLE (1 << 27) # define I965_ROC_CLOCK_GATE_DISABLE (1 << 26) # define I965_GW_CLOCK_GATE_DISABLE (1 << 25) # define I965_TD_CLOCK_GATE_DISABLE (1 << 24) -/** This bit must always be set on 965G */ +/* This bit must always be set on 965G */ # define I965_ISC_CLOCK_GATE_DISABLE (1 << 23) # define I965_IC_CLOCK_GATE_DISABLE (1 << 22) # define I965_EU_CLOCK_GATE_DISABLE (1 << 21) @@ -1357,2323 +718,91 @@ # define I965_FT_CLOCK_GATE_DISABLE (1 << 1) # define I965_DM_CLOCK_GATE_DISABLE (1 << 0) -#define RENCLK_GATE_D2 0x6208 +#define RENCLK_GATE_D2 _MMIO(0x6208) #define VF_UNIT_CLOCK_GATE_DISABLE (1 << 9) #define GS_UNIT_CLOCK_GATE_DISABLE (1 << 7) #define CL_UNIT_CLOCK_GATE_DISABLE (1 << 6) -#define RAMCLK_GATE_D 0x6210 /* CRL only */ -#define DEUC 0x6214 /* CRL only */ - -#define FW_BLC_SELF_VLV (VLV_DISPLAY_BASE + 0x6500) -#define FW_CSPWRDWNEN (1<<15) - -#define MI_ARB_VLV (VLV_DISPLAY_BASE + 0x6504) - -/* - * Palette regs - */ - -#define _PALETTE_A (dev_priv->info->display_mmio_offset + 0xa000) -#define _PALETTE_B (dev_priv->info->display_mmio_offset + 0xa800) -#define PALETTE(pipe) _PIPE(pipe, _PALETTE_A, _PALETTE_B) - -/* MCH MMIO space */ - -/* - * MCHBAR mirror. - * - * This mirrors the MCHBAR MMIO space whose location is determined by - * device 0 function 0's pci config register 0x44 or 0x48 and matches it in - * every way. It is not accessible from the CP register read instructions. - * - */ -#define MCHBAR_MIRROR_BASE 0x10000 - -#define MCHBAR_MIRROR_BASE_SNB 0x140000 - -/* Memory controller frequency in MCHBAR for Haswell (possible SNB+) */ -#define DCLK 0x5e04 - -/** 915-945 and GM965 MCH register controlling DRAM channel access */ -#define DCC 0x10200 -#define DCC_ADDRESSING_MODE_SINGLE_CHANNEL (0 << 0) -#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_ASYMMETRIC (1 << 0) -#define DCC_ADDRESSING_MODE_DUAL_CHANNEL_INTERLEAVED (2 << 0) -#define DCC_ADDRESSING_MODE_MASK (3 << 0) -#define DCC_CHANNEL_XOR_DISABLE (1 << 10) -#define DCC_CHANNEL_XOR_BIT_17 (1 << 9) - -/** Pineview MCH register contains DDR3 setting */ -#define CSHRDDR3CTL 0x101a8 -#define CSHRDDR3CTL_DDR3 (1 << 2) - -/** 965 MCH register controlling DRAM channel configuration */ -#define C0DRB3 0x10206 -#define C1DRB3 0x10606 - -/** snb MCH registers for reading the DRAM channel configuration */ -#define MAD_DIMM_C0 (MCHBAR_MIRROR_BASE_SNB + 0x5004) -#define MAD_DIMM_C1 (MCHBAR_MIRROR_BASE_SNB + 0x5008) -#define MAD_DIMM_C2 (MCHBAR_MIRROR_BASE_SNB + 0x500C) -#define MAD_DIMM_ECC_MASK (0x3 << 24) -#define MAD_DIMM_ECC_OFF (0x0 << 24) -#define MAD_DIMM_ECC_IO_ON_LOGIC_OFF (0x1 << 24) -#define MAD_DIMM_ECC_IO_OFF_LOGIC_ON (0x2 << 24) -#define MAD_DIMM_ECC_ON (0x3 << 24) -#define MAD_DIMM_ENH_INTERLEAVE (0x1 << 22) -#define MAD_DIMM_RANK_INTERLEAVE (0x1 << 21) -#define MAD_DIMM_B_WIDTH_X16 (0x1 << 20) /* X8 chips if unset */ -#define MAD_DIMM_A_WIDTH_X16 (0x1 << 19) /* X8 chips if unset */ -#define MAD_DIMM_B_DUAL_RANK (0x1 << 18) -#define MAD_DIMM_A_DUAL_RANK (0x1 << 17) -#define MAD_DIMM_A_SELECT (0x1 << 16) -/* DIMM sizes are in multiples of 256mb. */ -#define MAD_DIMM_B_SIZE_SHIFT 8 -#define MAD_DIMM_B_SIZE_MASK (0xff << MAD_DIMM_B_SIZE_SHIFT) -#define MAD_DIMM_A_SIZE_SHIFT 0 -#define MAD_DIMM_A_SIZE_MASK (0xff << MAD_DIMM_A_SIZE_SHIFT) - -/** snb MCH registers for priority tuning */ -#define MCH_SSKPD (MCHBAR_MIRROR_BASE_SNB + 0x5d10) -#define MCH_SSKPD_WM0_MASK 0x3f -#define MCH_SSKPD_WM0_VAL 0xc - -/* Clocking configuration register */ -#define CLKCFG 0x10c00 -#define CLKCFG_FSB_400 (5 << 0) /* hrawclk 100 */ -#define CLKCFG_FSB_533 (1 << 0) /* hrawclk 133 */ -#define CLKCFG_FSB_667 (3 << 0) /* hrawclk 166 */ -#define CLKCFG_FSB_800 (2 << 0) /* hrawclk 200 */ -#define CLKCFG_FSB_1067 (6 << 0) /* hrawclk 266 */ -#define CLKCFG_FSB_1333 (7 << 0) /* hrawclk 333 */ -/* Note, below two are guess */ -#define CLKCFG_FSB_1600 (4 << 0) /* hrawclk 400 */ -#define CLKCFG_FSB_1600_ALT (0 << 0) /* hrawclk 400 */ -#define CLKCFG_FSB_MASK (7 << 0) -#define CLKCFG_MEM_533 (1 << 4) -#define CLKCFG_MEM_667 (2 << 4) -#define CLKCFG_MEM_800 (3 << 4) -#define CLKCFG_MEM_MASK (7 << 4) - -#define TSC1 0x11001 -#define TSE (1<<0) -#define TR1 0x11006 -#define TSFS 0x11020 -#define TSFS_SLOPE_MASK 0x0000ff00 -#define TSFS_SLOPE_SHIFT 8 -#define TSFS_INTR_MASK 0x000000ff - -#define CRSTANDVID 0x11100 -#define PXVFREQ_BASE 0x11110 /* P[0-15]VIDFREQ (0x1114c) (Ironlake) */ -#define PXVFREQ_PX_MASK 0x7f000000 -#define PXVFREQ_PX_SHIFT 24 -#define VIDFREQ_BASE 0x11110 -#define VIDFREQ1 0x11110 /* VIDFREQ1-4 (0x1111c) (Cantiga) */ -#define VIDFREQ2 0x11114 -#define VIDFREQ3 0x11118 -#define VIDFREQ4 0x1111c -#define VIDFREQ_P0_MASK 0x1f000000 -#define VIDFREQ_P0_SHIFT 24 -#define VIDFREQ_P0_CSCLK_MASK 0x00f00000 -#define VIDFREQ_P0_CSCLK_SHIFT 20 -#define VIDFREQ_P0_CRCLK_MASK 0x000f0000 -#define VIDFREQ_P0_CRCLK_SHIFT 16 -#define VIDFREQ_P1_MASK 0x00001f00 -#define VIDFREQ_P1_SHIFT 8 -#define VIDFREQ_P1_CSCLK_MASK 0x000000f0 -#define VIDFREQ_P1_CSCLK_SHIFT 4 -#define VIDFREQ_P1_CRCLK_MASK 0x0000000f -#define INTTOEXT_BASE_ILK 0x11300 -#define INTTOEXT_BASE 0x11120 /* INTTOEXT1-8 (0x1113c) */ -#define INTTOEXT_MAP3_SHIFT 24 -#define INTTOEXT_MAP3_MASK (0x1f << INTTOEXT_MAP3_SHIFT) -#define INTTOEXT_MAP2_SHIFT 16 -#define INTTOEXT_MAP2_MASK (0x1f << INTTOEXT_MAP2_SHIFT) -#define INTTOEXT_MAP1_SHIFT 8 -#define INTTOEXT_MAP1_MASK (0x1f << INTTOEXT_MAP1_SHIFT) -#define INTTOEXT_MAP0_SHIFT 0 -#define INTTOEXT_MAP0_MASK (0x1f << INTTOEXT_MAP0_SHIFT) -#define MEMSWCTL 0x11170 /* Ironlake only */ -#define MEMCTL_CMD_MASK 0xe000 -#define MEMCTL_CMD_SHIFT 13 -#define MEMCTL_CMD_RCLK_OFF 0 -#define MEMCTL_CMD_RCLK_ON 1 -#define MEMCTL_CMD_CHFREQ 2 -#define MEMCTL_CMD_CHVID 3 -#define MEMCTL_CMD_VMMOFF 4 -#define MEMCTL_CMD_VMMON 5 -#define MEMCTL_CMD_STS (1<<12) /* write 1 triggers command, clears - when command complete */ -#define MEMCTL_FREQ_MASK 0x0f00 /* jitter, from 0-15 */ -#define MEMCTL_FREQ_SHIFT 8 -#define MEMCTL_SFCAVM (1<<7) -#define MEMCTL_TGT_VID_MASK 0x007f -#define MEMIHYST 0x1117c -#define MEMINTREN 0x11180 /* 16 bits */ -#define MEMINT_RSEXIT_EN (1<<8) -#define MEMINT_CX_SUPR_EN (1<<7) -#define MEMINT_CONT_BUSY_EN (1<<6) -#define MEMINT_AVG_BUSY_EN (1<<5) -#define MEMINT_EVAL_CHG_EN (1<<4) -#define MEMINT_MON_IDLE_EN (1<<3) -#define MEMINT_UP_EVAL_EN (1<<2) -#define MEMINT_DOWN_EVAL_EN (1<<1) -#define MEMINT_SW_CMD_EN (1<<0) -#define MEMINTRSTR 0x11182 /* 16 bits */ -#define MEM_RSEXIT_MASK 0xc000 -#define MEM_RSEXIT_SHIFT 14 -#define MEM_CONT_BUSY_MASK 0x3000 -#define MEM_CONT_BUSY_SHIFT 12 -#define MEM_AVG_BUSY_MASK 0x0c00 -#define MEM_AVG_BUSY_SHIFT 10 -#define MEM_EVAL_CHG_MASK 0x0300 -#define MEM_EVAL_BUSY_SHIFT 8 -#define MEM_MON_IDLE_MASK 0x00c0 -#define MEM_MON_IDLE_SHIFT 6 -#define MEM_UP_EVAL_MASK 0x0030 -#define MEM_UP_EVAL_SHIFT 4 -#define MEM_DOWN_EVAL_MASK 0x000c -#define MEM_DOWN_EVAL_SHIFT 2 -#define MEM_SW_CMD_MASK 0x0003 -#define MEM_INT_STEER_GFX 0 -#define MEM_INT_STEER_CMR 1 -#define MEM_INT_STEER_SMI 2 -#define MEM_INT_STEER_SCI 3 -#define MEMINTRSTS 0x11184 -#define MEMINT_RSEXIT (1<<7) -#define MEMINT_CONT_BUSY (1<<6) -#define MEMINT_AVG_BUSY (1<<5) -#define MEMINT_EVAL_CHG (1<<4) -#define MEMINT_MON_IDLE (1<<3) -#define MEMINT_UP_EVAL (1<<2) -#define MEMINT_DOWN_EVAL (1<<1) -#define MEMINT_SW_CMD (1<<0) -#define MEMMODECTL 0x11190 -#define MEMMODE_BOOST_EN (1<<31) -#define MEMMODE_BOOST_FREQ_MASK 0x0f000000 /* jitter for boost, 0-15 */ -#define MEMMODE_BOOST_FREQ_SHIFT 24 -#define MEMMODE_IDLE_MODE_MASK 0x00030000 -#define MEMMODE_IDLE_MODE_SHIFT 16 -#define MEMMODE_IDLE_MODE_EVAL 0 -#define MEMMODE_IDLE_MODE_CONT 1 -#define MEMMODE_HWIDLE_EN (1<<15) -#define MEMMODE_SWMODE_EN (1<<14) -#define MEMMODE_RCLK_GATE (1<<13) -#define MEMMODE_HW_UPDATE (1<<12) -#define MEMMODE_FSTART_MASK 0x00000f00 /* starting jitter, 0-15 */ -#define MEMMODE_FSTART_SHIFT 8 -#define MEMMODE_FMAX_MASK 0x000000f0 /* max jitter, 0-15 */ -#define MEMMODE_FMAX_SHIFT 4 -#define MEMMODE_FMIN_MASK 0x0000000f /* min jitter, 0-15 */ -#define RCBMAXAVG 0x1119c -#define MEMSWCTL2 0x1119e /* Cantiga only */ -#define SWMEMCMD_RENDER_OFF (0 << 13) -#define SWMEMCMD_RENDER_ON (1 << 13) -#define SWMEMCMD_SWFREQ (2 << 13) -#define SWMEMCMD_TARVID (3 << 13) -#define SWMEMCMD_VRM_OFF (4 << 13) -#define SWMEMCMD_VRM_ON (5 << 13) -#define CMDSTS (1<<12) -#define SFCAVM (1<<11) -#define SWFREQ_MASK 0x0380 /* P0-7 */ -#define SWFREQ_SHIFT 7 -#define TARVID_MASK 0x001f -#define MEMSTAT_CTG 0x111a0 -#define RCBMINAVG 0x111a0 -#define RCUPEI 0x111b0 -#define RCDNEI 0x111b4 -#define RSTDBYCTL 0x111b8 -#define RS1EN (1<<31) -#define RS2EN (1<<30) -#define RS3EN (1<<29) -#define D3RS3EN (1<<28) /* Display D3 imlies RS3 */ -#define SWPROMORSX (1<<27) /* RSx promotion timers ignored */ -#define RCWAKERW (1<<26) /* Resetwarn from PCH causes wakeup */ -#define DPRSLPVREN (1<<25) /* Fast voltage ramp enable */ -#define GFXTGHYST (1<<24) /* Hysteresis to allow trunk gating */ -#define RCX_SW_EXIT (1<<23) /* Leave RSx and prevent re-entry */ -#define RSX_STATUS_MASK (7<<20) -#define RSX_STATUS_ON (0<<20) -#define RSX_STATUS_RC1 (1<<20) -#define RSX_STATUS_RC1E (2<<20) -#define RSX_STATUS_RS1 (3<<20) -#define RSX_STATUS_RS2 (4<<20) /* aka rc6 */ -#define RSX_STATUS_RSVD (5<<20) /* deep rc6 unsupported on ilk */ -#define RSX_STATUS_RS3 (6<<20) /* rs3 unsupported on ilk */ -#define RSX_STATUS_RSVD2 (7<<20) -#define UWRCRSXE (1<<19) /* wake counter limit prevents rsx */ -#define RSCRP (1<<18) /* rs requests control on rs1/2 reqs */ -#define JRSC (1<<17) /* rsx coupled to cpu c-state */ -#define RS2INC0 (1<<16) /* allow rs2 in cpu c0 */ -#define RS1CONTSAV_MASK (3<<14) -#define RS1CONTSAV_NO_RS1 (0<<14) /* rs1 doesn't save/restore context */ -#define RS1CONTSAV_RSVD (1<<14) -#define RS1CONTSAV_SAVE_RS1 (2<<14) /* rs1 saves context */ -#define RS1CONTSAV_FULL_RS1 (3<<14) /* rs1 saves and restores context */ -#define NORMSLEXLAT_MASK (3<<12) -#define SLOW_RS123 (0<<12) -#define SLOW_RS23 (1<<12) -#define SLOW_RS3 (2<<12) -#define NORMAL_RS123 (3<<12) -#define RCMODE_TIMEOUT (1<<11) /* 0 is eval interval method */ -#define IMPROMOEN (1<<10) /* promo is immediate or delayed until next idle interval (only for timeout method above) */ -#define RCENTSYNC (1<<9) /* rs coupled to cpu c-state (3/6/7) */ -#define STATELOCK (1<<7) /* locked to rs_cstate if 0 */ -#define RS_CSTATE_MASK (3<<4) -#define RS_CSTATE_C367_RS1 (0<<4) -#define RS_CSTATE_C36_RS1_C7_RS2 (1<<4) -#define RS_CSTATE_RSVD (2<<4) -#define RS_CSTATE_C367_RS2 (3<<4) -#define REDSAVES (1<<3) /* no context save if was idle during rs0 */ -#define REDRESTORES (1<<2) /* no restore if was idle during rs0 */ -#define VIDCTL 0x111c0 -#define VIDSTS 0x111c8 -#define VIDSTART 0x111cc /* 8 bits */ -#define MEMSTAT_ILK 0x111f8 -#define MEMSTAT_VID_MASK 0x7f00 -#define MEMSTAT_VID_SHIFT 8 -#define MEMSTAT_PSTATE_MASK 0x00f8 -#define MEMSTAT_PSTATE_SHIFT 3 -#define MEMSTAT_MON_ACTV (1<<2) -#define MEMSTAT_SRC_CTL_MASK 0x0003 -#define MEMSTAT_SRC_CTL_CORE 0 -#define MEMSTAT_SRC_CTL_TRB 1 -#define MEMSTAT_SRC_CTL_THM 2 -#define MEMSTAT_SRC_CTL_STDBY 3 -#define RCPREVBSYTUPAVG 0x113b8 -#define RCPREVBSYTDNAVG 0x113bc -#define PMMISC 0x11214 -#define MCPPCE_EN (1<<0) /* enable PM_MSG from PCH->MPC */ -#define SDEW 0x1124c -#define CSIEW0 0x11250 -#define CSIEW1 0x11254 -#define CSIEW2 0x11258 -#define PEW 0x1125c -#define DEW 0x11270 -#define MCHAFE 0x112c0 -#define CSIEC 0x112e0 -#define DMIEC 0x112e4 -#define DDREC 0x112e8 -#define PEG0EC 0x112ec -#define PEG1EC 0x112f0 -#define GFXEC 0x112f4 -#define RPPREVBSYTUPAVG 0x113b8 -#define RPPREVBSYTDNAVG 0x113bc -#define ECR 0x11600 -#define ECR_GPFE (1<<31) -#define ECR_IMONE (1<<30) -#define ECR_CAP_MASK 0x0000001f /* Event range, 0-31 */ -#define OGW0 0x11608 -#define OGW1 0x1160c -#define EG0 0x11610 -#define EG1 0x11614 -#define EG2 0x11618 -#define EG3 0x1161c -#define EG4 0x11620 -#define EG5 0x11624 -#define EG6 0x11628 -#define EG7 0x1162c -#define PXW 0x11664 -#define PXWL 0x11680 -#define LCFUSE02 0x116c0 -#define LCFUSE_HIV_MASK 0x000000ff -#define CSIPLL0 0x12c10 -#define DDRMPLL1 0X12c20 -#define PEG_BAND_GAP_DATA 0x14d68 - -#define GEN6_GT_THREAD_STATUS_REG 0x13805c -#define GEN6_GT_THREAD_STATUS_CORE_MASK 0x7 -#define GEN6_GT_THREAD_STATUS_CORE_MASK_HSW (0x7 | (0x07 << 16)) - -#define GEN6_GT_PERF_STATUS 0x145948 -#define GEN6_RP_STATE_LIMITS 0x145994 -#define GEN6_RP_STATE_CAP 0x145998 - -/* - * Logical Context regs - */ -#define CCID 0x2180 -#define CCID_EN (1<<0) -#define CXT_SIZE 0x21a0 -#define GEN6_CXT_POWER_SIZE(cxt_reg) ((cxt_reg >> 24) & 0x3f) -#define GEN6_CXT_RING_SIZE(cxt_reg) ((cxt_reg >> 18) & 0x3f) -#define GEN6_CXT_RENDER_SIZE(cxt_reg) ((cxt_reg >> 12) & 0x3f) -#define GEN6_CXT_EXTENDED_SIZE(cxt_reg) ((cxt_reg >> 6) & 0x3f) -#define GEN6_CXT_PIPELINE_SIZE(cxt_reg) ((cxt_reg >> 0) & 0x3f) -#define GEN6_CXT_TOTAL_SIZE(cxt_reg) (GEN6_CXT_POWER_SIZE(cxt_reg) + \ - GEN6_CXT_RING_SIZE(cxt_reg) + \ - GEN6_CXT_RENDER_SIZE(cxt_reg) + \ - GEN6_CXT_EXTENDED_SIZE(cxt_reg) + \ - GEN6_CXT_PIPELINE_SIZE(cxt_reg)) -#define GEN7_CXT_SIZE 0x21a8 -#define GEN7_CXT_POWER_SIZE(ctx_reg) ((ctx_reg >> 25) & 0x7f) -#define GEN7_CXT_RING_SIZE(ctx_reg) ((ctx_reg >> 22) & 0x7) -#define GEN7_CXT_RENDER_SIZE(ctx_reg) ((ctx_reg >> 16) & 0x3f) -#define GEN7_CXT_EXTENDED_SIZE(ctx_reg) ((ctx_reg >> 9) & 0x7f) -#define GEN7_CXT_GT1_SIZE(ctx_reg) ((ctx_reg >> 6) & 0x7) -#define GEN7_CXT_VFSTATE_SIZE(ctx_reg) ((ctx_reg >> 0) & 0x3f) -#define GEN7_CXT_TOTAL_SIZE(ctx_reg) (GEN7_CXT_POWER_SIZE(ctx_reg) + \ - GEN7_CXT_RING_SIZE(ctx_reg) + \ - GEN7_CXT_RENDER_SIZE(ctx_reg) + \ - GEN7_CXT_EXTENDED_SIZE(ctx_reg) + \ - GEN7_CXT_GT1_SIZE(ctx_reg) + \ - GEN7_CXT_VFSTATE_SIZE(ctx_reg)) -/* Haswell does have the CXT_SIZE register however it does not appear to be - * valid. Now, docs explain in dwords what is in the context object. The full - * size is 70720 bytes, however, the power context and execlist context will - * never be saved (power context is stored elsewhere, and execlists don't work - * on HSW) - so the final size is 66944 bytes, which rounds to 17 pages. - */ -#define HSW_CXT_TOTAL_SIZE (17 * PAGE_SIZE) - -/* - * Overlay regs - */ - -#define OVADD 0x30000 -#define DOVSTA 0x30008 -#define OC_BUF (0x3<<20) -#define OGAMC5 0x30010 -#define OGAMC4 0x30014 -#define OGAMC3 0x30018 -#define OGAMC2 0x3001c -#define OGAMC1 0x30020 -#define OGAMC0 0x30024 - -/* - * Display engine regs - */ - -/* Pipe A timing regs */ -#define _HTOTAL_A (dev_priv->info->display_mmio_offset + 0x60000) -#define _HBLANK_A (dev_priv->info->display_mmio_offset + 0x60004) -#define _HSYNC_A (dev_priv->info->display_mmio_offset + 0x60008) -#define _VTOTAL_A (dev_priv->info->display_mmio_offset + 0x6000c) -#define _VBLANK_A (dev_priv->info->display_mmio_offset + 0x60010) -#define _VSYNC_A (dev_priv->info->display_mmio_offset + 0x60014) -#define _PIPEASRC (dev_priv->info->display_mmio_offset + 0x6001c) -#define _BCLRPAT_A (dev_priv->info->display_mmio_offset + 0x60020) -#define _VSYNCSHIFT_A (dev_priv->info->display_mmio_offset + 0x60028) - -/* Pipe B timing regs */ -#define _HTOTAL_B (dev_priv->info->display_mmio_offset + 0x61000) -#define _HBLANK_B (dev_priv->info->display_mmio_offset + 0x61004) -#define _HSYNC_B (dev_priv->info->display_mmio_offset + 0x61008) -#define _VTOTAL_B (dev_priv->info->display_mmio_offset + 0x6100c) -#define _VBLANK_B (dev_priv->info->display_mmio_offset + 0x61010) -#define _VSYNC_B (dev_priv->info->display_mmio_offset + 0x61014) -#define _PIPEBSRC (dev_priv->info->display_mmio_offset + 0x6101c) -#define _BCLRPAT_B (dev_priv->info->display_mmio_offset + 0x61020) -#define _VSYNCSHIFT_B (dev_priv->info->display_mmio_offset + 0x61028) - - -#define HTOTAL(trans) _TRANSCODER(trans, _HTOTAL_A, _HTOTAL_B) -#define HBLANK(trans) _TRANSCODER(trans, _HBLANK_A, _HBLANK_B) -#define HSYNC(trans) _TRANSCODER(trans, _HSYNC_A, _HSYNC_B) -#define VTOTAL(trans) _TRANSCODER(trans, _VTOTAL_A, _VTOTAL_B) -#define VBLANK(trans) _TRANSCODER(trans, _VBLANK_A, _VBLANK_B) -#define VSYNC(trans) _TRANSCODER(trans, _VSYNC_A, _VSYNC_B) -#define BCLRPAT(pipe) _PIPE(pipe, _BCLRPAT_A, _BCLRPAT_B) -#define VSYNCSHIFT(trans) _TRANSCODER(trans, _VSYNCSHIFT_A, _VSYNCSHIFT_B) - -/* VGA port control */ -#define ADPA 0x61100 -#define PCH_ADPA 0xe1100 -#define VLV_ADPA (VLV_DISPLAY_BASE + ADPA) - -#define ADPA_DAC_ENABLE (1<<31) -#define ADPA_DAC_DISABLE 0 -#define ADPA_PIPE_SELECT_MASK (1<<30) -#define ADPA_PIPE_A_SELECT 0 -#define ADPA_PIPE_B_SELECT (1<<30) -#define ADPA_PIPE_SELECT(pipe) ((pipe) << 30) -/* CPT uses bits 29:30 for pch transcoder select */ -#define ADPA_CRT_HOTPLUG_MASK 0x03ff0000 /* bit 25-16 */ -#define ADPA_CRT_HOTPLUG_MONITOR_NONE (0<<24) -#define ADPA_CRT_HOTPLUG_MONITOR_MASK (3<<24) -#define ADPA_CRT_HOTPLUG_MONITOR_COLOR (3<<24) -#define ADPA_CRT_HOTPLUG_MONITOR_MONO (2<<24) -#define ADPA_CRT_HOTPLUG_ENABLE (1<<23) -#define ADPA_CRT_HOTPLUG_PERIOD_64 (0<<22) -#define ADPA_CRT_HOTPLUG_PERIOD_128 (1<<22) -#define ADPA_CRT_HOTPLUG_WARMUP_5MS (0<<21) -#define ADPA_CRT_HOTPLUG_WARMUP_10MS (1<<21) -#define ADPA_CRT_HOTPLUG_SAMPLE_2S (0<<20) -#define ADPA_CRT_HOTPLUG_SAMPLE_4S (1<<20) -#define ADPA_CRT_HOTPLUG_VOLTAGE_40 (0<<18) -#define ADPA_CRT_HOTPLUG_VOLTAGE_50 (1<<18) -#define ADPA_CRT_HOTPLUG_VOLTAGE_60 (2<<18) -#define ADPA_CRT_HOTPLUG_VOLTAGE_70 (3<<18) -#define ADPA_CRT_HOTPLUG_VOLREF_325MV (0<<17) -#define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17) -#define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) -#define ADPA_USE_VGA_HVPOLARITY (1<<15) -#define ADPA_SETS_HVPOLARITY 0 -#define ADPA_VSYNC_CNTL_DISABLE (1<<10) -#define ADPA_VSYNC_CNTL_ENABLE 0 -#define ADPA_HSYNC_CNTL_DISABLE (1<<11) -#define ADPA_HSYNC_CNTL_ENABLE 0 -#define ADPA_VSYNC_ACTIVE_HIGH (1<<4) -#define ADPA_VSYNC_ACTIVE_LOW 0 -#define ADPA_HSYNC_ACTIVE_HIGH (1<<3) -#define ADPA_HSYNC_ACTIVE_LOW 0 -#define ADPA_DPMS_MASK (~(3<<10)) -#define ADPA_DPMS_ON (0<<10) -#define ADPA_DPMS_SUSPEND (1<<10) -#define ADPA_DPMS_STANDBY (2<<10) -#define ADPA_DPMS_OFF (3<<10) - - -/* Hotplug control (945+ only) */ -#define PORT_HOTPLUG_EN (dev_priv->info->display_mmio_offset + 0x61110) -#define PORTB_HOTPLUG_INT_EN (1 << 29) -#define PORTC_HOTPLUG_INT_EN (1 << 28) -#define PORTD_HOTPLUG_INT_EN (1 << 27) -#define SDVOB_HOTPLUG_INT_EN (1 << 26) -#define SDVOC_HOTPLUG_INT_EN (1 << 25) -#define TV_HOTPLUG_INT_EN (1 << 18) -#define CRT_HOTPLUG_INT_EN (1 << 9) -#define HOTPLUG_INT_EN_MASK (PORTB_HOTPLUG_INT_EN | \ - PORTC_HOTPLUG_INT_EN | \ - PORTD_HOTPLUG_INT_EN | \ - SDVOC_HOTPLUG_INT_EN | \ - SDVOB_HOTPLUG_INT_EN | \ - CRT_HOTPLUG_INT_EN) -#define CRT_HOTPLUG_FORCE_DETECT (1 << 3) -#define CRT_HOTPLUG_ACTIVATION_PERIOD_32 (0 << 8) -/* must use period 64 on GM45 according to docs */ -#define CRT_HOTPLUG_ACTIVATION_PERIOD_64 (1 << 8) -#define CRT_HOTPLUG_DAC_ON_TIME_2M (0 << 7) -#define CRT_HOTPLUG_DAC_ON_TIME_4M (1 << 7) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_40 (0 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_50 (1 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_60 (2 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_70 (3 << 5) -#define CRT_HOTPLUG_VOLTAGE_COMPARE_MASK (3 << 5) -#define CRT_HOTPLUG_DETECT_DELAY_1G (0 << 4) -#define CRT_HOTPLUG_DETECT_DELAY_2G (1 << 4) -#define CRT_HOTPLUG_DETECT_VOLTAGE_325MV (0 << 2) -#define CRT_HOTPLUG_DETECT_VOLTAGE_475MV (1 << 2) - -#define PORT_HOTPLUG_STAT (dev_priv->info->display_mmio_offset + 0x61114) -/* HDMI/DP bits are gen4+ */ -#define PORTB_HOTPLUG_LIVE_STATUS (1 << 29) -#define PORTC_HOTPLUG_LIVE_STATUS (1 << 28) -#define PORTD_HOTPLUG_LIVE_STATUS (1 << 27) -#define PORTD_HOTPLUG_INT_STATUS (3 << 21) -#define PORTC_HOTPLUG_INT_STATUS (3 << 19) -#define PORTB_HOTPLUG_INT_STATUS (3 << 17) -/* CRT/TV common between gen3+ */ -#define CRT_HOTPLUG_INT_STATUS (1 << 11) -#define TV_HOTPLUG_INT_STATUS (1 << 10) -#define CRT_HOTPLUG_MONITOR_MASK (3 << 8) -#define CRT_HOTPLUG_MONITOR_COLOR (3 << 8) -#define CRT_HOTPLUG_MONITOR_MONO (2 << 8) -#define CRT_HOTPLUG_MONITOR_NONE (0 << 8) -/* SDVO is different across gen3/4 */ -#define SDVOC_HOTPLUG_INT_STATUS_G4X (1 << 3) -#define SDVOB_HOTPLUG_INT_STATUS_G4X (1 << 2) -/* - * Bspec seems to be seriously misleaded about the SDVO hpd bits on i965g/gm, - * since reality corrobates that they're the same as on gen3. But keep these - * bits here (and the comment!) to help any other lost wanderers back onto the - * right tracks. - */ -#define SDVOC_HOTPLUG_INT_STATUS_I965 (3 << 4) -#define SDVOB_HOTPLUG_INT_STATUS_I965 (3 << 2) -#define SDVOC_HOTPLUG_INT_STATUS_I915 (1 << 7) -#define SDVOB_HOTPLUG_INT_STATUS_I915 (1 << 6) -#define HOTPLUG_INT_STATUS_G4X (CRT_HOTPLUG_INT_STATUS | \ - SDVOB_HOTPLUG_INT_STATUS_G4X | \ - SDVOC_HOTPLUG_INT_STATUS_G4X | \ - PORTB_HOTPLUG_INT_STATUS | \ - PORTC_HOTPLUG_INT_STATUS | \ - PORTD_HOTPLUG_INT_STATUS) - -#define HOTPLUG_INT_STATUS_I915 (CRT_HOTPLUG_INT_STATUS | \ - SDVOB_HOTPLUG_INT_STATUS_I915 | \ - SDVOC_HOTPLUG_INT_STATUS_I915 | \ - PORTB_HOTPLUG_INT_STATUS | \ - PORTC_HOTPLUG_INT_STATUS | \ - PORTD_HOTPLUG_INT_STATUS) - -/* SDVO and HDMI port control. - * The same register may be used for SDVO or HDMI */ -#define GEN3_SDVOB 0x61140 -#define GEN3_SDVOC 0x61160 -#define GEN4_HDMIB GEN3_SDVOB -#define GEN4_HDMIC GEN3_SDVOC -#define PCH_SDVOB 0xe1140 -#define PCH_HDMIB PCH_SDVOB -#define PCH_HDMIC 0xe1150 -#define PCH_HDMID 0xe1160 - -/* Gen 3 SDVO bits: */ -#define SDVO_ENABLE (1 << 31) -#define SDVO_PIPE_SEL(pipe) ((pipe) << 30) -#define SDVO_PIPE_SEL_MASK (1 << 30) -#define SDVO_PIPE_B_SELECT (1 << 30) -#define SDVO_STALL_SELECT (1 << 29) -#define SDVO_INTERRUPT_ENABLE (1 << 26) -/** - * 915G/GM SDVO pixel multiplier. - * Programmed value is multiplier - 1, up to 5x. - * \sa DPLL_MD_UDI_MULTIPLIER_MASK - */ -#define SDVO_PORT_MULTIPLY_MASK (7 << 23) -#define SDVO_PORT_MULTIPLY_SHIFT 23 -#define SDVO_PHASE_SELECT_MASK (15 << 19) -#define SDVO_PHASE_SELECT_DEFAULT (6 << 19) -#define SDVO_CLOCK_OUTPUT_INVERT (1 << 18) -#define SDVOC_GANG_MODE (1 << 16) /* Port C only */ -#define SDVO_BORDER_ENABLE (1 << 7) /* SDVO only */ -#define SDVOB_PCIE_CONCURRENCY (1 << 3) /* Port B only */ -#define SDVO_DETECTED (1 << 2) -/* Bits to be preserved when writing */ -#define SDVOB_PRESERVE_MASK ((1 << 17) | (1 << 16) | (1 << 14) | \ - SDVO_INTERRUPT_ENABLE) -#define SDVOC_PRESERVE_MASK ((1 << 17) | SDVO_INTERRUPT_ENABLE) - -/* Gen 4 SDVO/HDMI bits: */ -#define SDVO_COLOR_FORMAT_8bpc (0 << 26) -#define SDVO_ENCODING_SDVO (0 << 10) -#define SDVO_ENCODING_HDMI (2 << 10) -#define HDMI_MODE_SELECT_HDMI (1 << 9) /* HDMI only */ -#define HDMI_MODE_SELECT_DVI (0 << 9) /* HDMI only */ -#define HDMI_COLOR_RANGE_16_235 (1 << 8) /* HDMI only */ -#define SDVO_AUDIO_ENABLE (1 << 6) -/* VSYNC/HSYNC bits new with 965, default is to be set */ -#define SDVO_VSYNC_ACTIVE_HIGH (1 << 4) -#define SDVO_HSYNC_ACTIVE_HIGH (1 << 3) - -/* Gen 5 (IBX) SDVO/HDMI bits: */ -#define HDMI_COLOR_FORMAT_12bpc (3 << 26) /* HDMI only */ -#define SDVOB_HOTPLUG_ENABLE (1 << 23) /* SDVO only */ - -/* Gen 6 (CPT) SDVO/HDMI bits: */ -#define SDVO_PIPE_SEL_CPT(pipe) ((pipe) << 29) -#define SDVO_PIPE_SEL_MASK_CPT (3 << 29) - - -/* DVO port control */ -#define DVOA 0x61120 -#define DVOB 0x61140 -#define DVOC 0x61160 -#define DVO_ENABLE (1 << 31) -#define DVO_PIPE_B_SELECT (1 << 30) -#define DVO_PIPE_STALL_UNUSED (0 << 28) -#define DVO_PIPE_STALL (1 << 28) -#define DVO_PIPE_STALL_TV (2 << 28) -#define DVO_PIPE_STALL_MASK (3 << 28) -#define DVO_USE_VGA_SYNC (1 << 15) -#define DVO_DATA_ORDER_I740 (0 << 14) -#define DVO_DATA_ORDER_FP (1 << 14) -#define DVO_VSYNC_DISABLE (1 << 11) -#define DVO_HSYNC_DISABLE (1 << 10) -#define DVO_VSYNC_TRISTATE (1 << 9) -#define DVO_HSYNC_TRISTATE (1 << 8) -#define DVO_BORDER_ENABLE (1 << 7) -#define DVO_DATA_ORDER_GBRG (1 << 6) -#define DVO_DATA_ORDER_RGGB (0 << 6) -#define DVO_DATA_ORDER_GBRG_ERRATA (0 << 6) -#define DVO_DATA_ORDER_RGGB_ERRATA (1 << 6) -#define DVO_VSYNC_ACTIVE_HIGH (1 << 4) -#define DVO_HSYNC_ACTIVE_HIGH (1 << 3) -#define DVO_BLANK_ACTIVE_HIGH (1 << 2) -#define DVO_OUTPUT_CSTATE_PIXELS (1 << 1) /* SDG only */ -#define DVO_OUTPUT_SOURCE_SIZE_PIXELS (1 << 0) /* SDG only */ -#define DVO_PRESERVE_MASK (0x7<<24) -#define DVOA_SRCDIM 0x61124 -#define DVOB_SRCDIM 0x61144 -#define DVOC_SRCDIM 0x61164 -#define DVO_SRCDIM_HORIZONTAL_SHIFT 12 -#define DVO_SRCDIM_VERTICAL_SHIFT 0 - -/* LVDS port control */ -#define LVDS 0x61180 -/* - * Enables the LVDS port. This bit must be set before DPLLs are enabled, as - * the DPLL semantics change when the LVDS is assigned to that pipe. - */ -#define LVDS_PORT_EN (1 << 31) -/* Selects pipe B for LVDS data. Must be set on pre-965. */ -#define LVDS_PIPEB_SELECT (1 << 30) -#define LVDS_PIPE_MASK (1 << 30) -#define LVDS_PIPE(pipe) ((pipe) << 30) -/* LVDS dithering flag on 965/g4x platform */ -#define LVDS_ENABLE_DITHER (1 << 25) -/* LVDS sync polarity flags. Set to invert (i.e. negative) */ -#define LVDS_VSYNC_POLARITY (1 << 21) -#define LVDS_HSYNC_POLARITY (1 << 20) - -/* Enable border for unscaled (or aspect-scaled) display */ -#define LVDS_BORDER_ENABLE (1 << 15) -/* - * Enables the A0-A2 data pairs and CLKA, containing 18 bits of color data per - * pixel. - */ -#define LVDS_A0A2_CLKA_POWER_MASK (3 << 8) -#define LVDS_A0A2_CLKA_POWER_DOWN (0 << 8) -#define LVDS_A0A2_CLKA_POWER_UP (3 << 8) -/* - * Controls the A3 data pair, which contains the additional LSBs for 24 bit - * mode. Only enabled if LVDS_A0A2_CLKA_POWER_UP also indicates it should be - * on. - */ -#define LVDS_A3_POWER_MASK (3 << 6) -#define LVDS_A3_POWER_DOWN (0 << 6) -#define LVDS_A3_POWER_UP (3 << 6) -/* - * Controls the CLKB pair. This should only be set when LVDS_B0B3_POWER_UP - * is set. - */ -#define LVDS_CLKB_POWER_MASK (3 << 4) -#define LVDS_CLKB_POWER_DOWN (0 << 4) -#define LVDS_CLKB_POWER_UP (3 << 4) -/* - * Controls the B0-B3 data pairs. This must be set to match the DPLL p2 - * setting for whether we are in dual-channel mode. The B3 pair will - * additionally only be powered up when LVDS_A3_POWER_UP is set. - */ -#define LVDS_B0B3_POWER_MASK (3 << 2) -#define LVDS_B0B3_POWER_DOWN (0 << 2) -#define LVDS_B0B3_POWER_UP (3 << 2) - -/* Video Data Island Packet control */ -#define VIDEO_DIP_DATA 0x61178 -/* Read the description of VIDEO_DIP_DATA (before Haswel) or VIDEO_DIP_ECC - * (Haswell and newer) to see which VIDEO_DIP_DATA byte corresponds to each byte - * of the infoframe structure specified by CEA-861. */ -#define VIDEO_DIP_DATA_SIZE 32 -#define VIDEO_DIP_CTL 0x61170 -/* Pre HSW: */ -#define VIDEO_DIP_ENABLE (1 << 31) -#define VIDEO_DIP_PORT_B (1 << 29) -#define VIDEO_DIP_PORT_C (2 << 29) -#define VIDEO_DIP_PORT_D (3 << 29) -#define VIDEO_DIP_PORT_MASK (3 << 29) -#define VIDEO_DIP_ENABLE_GCP (1 << 25) -#define VIDEO_DIP_ENABLE_AVI (1 << 21) -#define VIDEO_DIP_ENABLE_VENDOR (2 << 21) -#define VIDEO_DIP_ENABLE_GAMUT (4 << 21) -#define VIDEO_DIP_ENABLE_SPD (8 << 21) -#define VIDEO_DIP_SELECT_AVI (0 << 19) -#define VIDEO_DIP_SELECT_VENDOR (1 << 19) -#define VIDEO_DIP_SELECT_SPD (3 << 19) -#define VIDEO_DIP_SELECT_MASK (3 << 19) -#define VIDEO_DIP_FREQ_ONCE (0 << 16) -#define VIDEO_DIP_FREQ_VSYNC (1 << 16) -#define VIDEO_DIP_FREQ_2VSYNC (2 << 16) -#define VIDEO_DIP_FREQ_MASK (3 << 16) -/* HSW and later: */ -#define VIDEO_DIP_ENABLE_VSC_HSW (1 << 20) -#define VIDEO_DIP_ENABLE_GCP_HSW (1 << 16) -#define VIDEO_DIP_ENABLE_AVI_HSW (1 << 12) -#define VIDEO_DIP_ENABLE_VS_HSW (1 << 8) -#define VIDEO_DIP_ENABLE_GMP_HSW (1 << 4) -#define VIDEO_DIP_ENABLE_SPD_HSW (1 << 0) - -/* Panel power sequencing */ -#define PP_STATUS 0x61200 -#define PP_ON (1 << 31) -/* - * Indicates that all dependencies of the panel are on: - * - * - PLL enabled - * - pipe enabled - * - LVDS/DVOB/DVOC on - */ -#define PP_READY (1 << 30) -#define PP_SEQUENCE_NONE (0 << 28) -#define PP_SEQUENCE_POWER_UP (1 << 28) -#define PP_SEQUENCE_POWER_DOWN (2 << 28) -#define PP_SEQUENCE_MASK (3 << 28) -#define PP_SEQUENCE_SHIFT 28 -#define PP_CYCLE_DELAY_ACTIVE (1 << 27) -#define PP_SEQUENCE_STATE_MASK 0x0000000f -#define PP_SEQUENCE_STATE_OFF_IDLE (0x0 << 0) -#define PP_SEQUENCE_STATE_OFF_S0_1 (0x1 << 0) -#define PP_SEQUENCE_STATE_OFF_S0_2 (0x2 << 0) -#define PP_SEQUENCE_STATE_OFF_S0_3 (0x3 << 0) -#define PP_SEQUENCE_STATE_ON_IDLE (0x8 << 0) -#define PP_SEQUENCE_STATE_ON_S1_0 (0x9 << 0) -#define PP_SEQUENCE_STATE_ON_S1_2 (0xa << 0) -#define PP_SEQUENCE_STATE_ON_S1_3 (0xb << 0) -#define PP_SEQUENCE_STATE_RESET (0xf << 0) -#define PP_CONTROL 0x61204 -#define POWER_TARGET_ON (1 << 0) -#define PP_ON_DELAYS 0x61208 -#define PP_OFF_DELAYS 0x6120c -#define PP_DIVISOR 0x61210 - -/* Panel fitting */ -#define PFIT_CONTROL (dev_priv->info->display_mmio_offset + 0x61230) -#define PFIT_ENABLE (1 << 31) -#define PFIT_PIPE_MASK (3 << 29) -#define PFIT_PIPE_SHIFT 29 -#define VERT_INTERP_DISABLE (0 << 10) -#define VERT_INTERP_BILINEAR (1 << 10) -#define VERT_INTERP_MASK (3 << 10) -#define VERT_AUTO_SCALE (1 << 9) -#define HORIZ_INTERP_DISABLE (0 << 6) -#define HORIZ_INTERP_BILINEAR (1 << 6) -#define HORIZ_INTERP_MASK (3 << 6) -#define HORIZ_AUTO_SCALE (1 << 5) -#define PANEL_8TO6_DITHER_ENABLE (1 << 3) -#define PFIT_FILTER_FUZZY (0 << 24) -#define PFIT_SCALING_AUTO (0 << 26) -#define PFIT_SCALING_PROGRAMMED (1 << 26) -#define PFIT_SCALING_PILLAR (2 << 26) -#define PFIT_SCALING_LETTER (3 << 26) -#define PFIT_PGM_RATIOS (dev_priv->info->display_mmio_offset + 0x61234) -/* Pre-965 */ -#define PFIT_VERT_SCALE_SHIFT 20 -#define PFIT_VERT_SCALE_MASK 0xfff00000 -#define PFIT_HORIZ_SCALE_SHIFT 4 -#define PFIT_HORIZ_SCALE_MASK 0x0000fff0 -/* 965+ */ -#define PFIT_VERT_SCALE_SHIFT_965 16 -#define PFIT_VERT_SCALE_MASK_965 0x1fff0000 -#define PFIT_HORIZ_SCALE_SHIFT_965 0 -#define PFIT_HORIZ_SCALE_MASK_965 0x00001fff - -#define PFIT_AUTO_RATIOS (dev_priv->info->display_mmio_offset + 0x61238) - -/* Backlight control */ -#define BLC_PWM_CTL2 (dev_priv->info->display_mmio_offset + 0x61250) /* 965+ only */ -#define BLM_PWM_ENABLE (1 << 31) -#define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */ -#define BLM_PIPE_SELECT (1 << 29) -#define BLM_PIPE_SELECT_IVB (3 << 29) -#define BLM_PIPE_A (0 << 29) -#define BLM_PIPE_B (1 << 29) -#define BLM_PIPE_C (2 << 29) /* ivb + */ -#define BLM_TRANSCODER_A BLM_PIPE_A /* hsw */ -#define BLM_TRANSCODER_B BLM_PIPE_B -#define BLM_TRANSCODER_C BLM_PIPE_C -#define BLM_TRANSCODER_EDP (3 << 29) -#define BLM_PIPE(pipe) ((pipe) << 29) -#define BLM_POLARITY_I965 (1 << 28) /* gen4 only */ -#define BLM_PHASE_IN_INTERUPT_STATUS (1 << 26) -#define BLM_PHASE_IN_ENABLE (1 << 25) -#define BLM_PHASE_IN_INTERUPT_ENABL (1 << 24) -#define BLM_PHASE_IN_TIME_BASE_SHIFT (16) -#define BLM_PHASE_IN_TIME_BASE_MASK (0xff << 16) -#define BLM_PHASE_IN_COUNT_SHIFT (8) -#define BLM_PHASE_IN_COUNT_MASK (0xff << 8) -#define BLM_PHASE_IN_INCR_SHIFT (0) -#define BLM_PHASE_IN_INCR_MASK (0xff << 0) -#define BLC_PWM_CTL (dev_priv->info->display_mmio_offset + 0x61254) -/* - * This is the most significant 15 bits of the number of backlight cycles in a - * complete cycle of the modulated backlight control. - * - * The actual value is this field multiplied by two. - */ -#define BACKLIGHT_MODULATION_FREQ_SHIFT (17) -#define BACKLIGHT_MODULATION_FREQ_MASK (0x7fff << 17) -#define BLM_LEGACY_MODE (1 << 16) /* gen2 only */ -/* - * This is the number of cycles out of the backlight modulation cycle for which - * the backlight is on. - * - * This field must be no greater than the number of cycles in the complete - * backlight modulation cycle. - */ -#define BACKLIGHT_DUTY_CYCLE_SHIFT (0) -#define BACKLIGHT_DUTY_CYCLE_MASK (0xffff) -#define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe) -#define BLM_POLARITY_PNV (1 << 0) /* pnv only */ - -#define BLC_HIST_CTL (dev_priv->info->display_mmio_offset + 0x61260) - -/* New registers for PCH-split platforms. Safe where new bits show up, the - * register layout machtes with gen4 BLC_PWM_CTL[12]. */ -#define BLC_PWM_CPU_CTL2 0x48250 -#define BLC_PWM_CPU_CTL 0x48254 - -/* PCH CTL1 is totally different, all but the below bits are reserved. CTL2 is - * like the normal CTL from gen4 and earlier. Hooray for confusing naming. */ -#define BLC_PWM_PCH_CTL1 0xc8250 -#define BLM_PCH_PWM_ENABLE (1 << 31) -#define BLM_PCH_OVERRIDE_ENABLE (1 << 30) -#define BLM_PCH_POLARITY (1 << 29) -#define BLC_PWM_PCH_CTL2 0xc8254 - -/* TV port control */ -#define TV_CTL 0x68000 -/** Enables the TV encoder */ -# define TV_ENC_ENABLE (1 << 31) -/** Sources the TV encoder input from pipe B instead of A. */ -# define TV_ENC_PIPEB_SELECT (1 << 30) -/** Outputs composite video (DAC A only) */ -# define TV_ENC_OUTPUT_COMPOSITE (0 << 28) -/** Outputs SVideo video (DAC B/C) */ -# define TV_ENC_OUTPUT_SVIDEO (1 << 28) -/** Outputs Component video (DAC A/B/C) */ -# define TV_ENC_OUTPUT_COMPONENT (2 << 28) -/** Outputs Composite and SVideo (DAC A/B/C) */ -# define TV_ENC_OUTPUT_SVIDEO_COMPOSITE (3 << 28) -# define TV_TRILEVEL_SYNC (1 << 21) -/** Enables slow sync generation (945GM only) */ -# define TV_SLOW_SYNC (1 << 20) -/** Selects 4x oversampling for 480i and 576p */ -# define TV_OVERSAMPLE_4X (0 << 18) -/** Selects 2x oversampling for 720p and 1080i */ -# define TV_OVERSAMPLE_2X (1 << 18) -/** Selects no oversampling for 1080p */ -# define TV_OVERSAMPLE_NONE (2 << 18) -/** Selects 8x oversampling */ -# define TV_OVERSAMPLE_8X (3 << 18) -/** Selects progressive mode rather than interlaced */ -# define TV_PROGRESSIVE (1 << 17) -/** Sets the colorburst to PAL mode. Required for non-M PAL modes. */ -# define TV_PAL_BURST (1 << 16) -/** Field for setting delay of Y compared to C */ -# define TV_YC_SKEW_MASK (7 << 12) -/** Enables a fix for 480p/576p standard definition modes on the 915GM only */ -# define TV_ENC_SDP_FIX (1 << 11) -/** - * Enables a fix for the 915GM only. - * - * Not sure what it does. - */ -# define TV_ENC_C0_FIX (1 << 10) -/** Bits that must be preserved by software */ -# define TV_CTL_SAVE ((1 << 11) | (3 << 9) | (7 << 6) | 0xf) -# define TV_FUSE_STATE_MASK (3 << 4) -/** Read-only state that reports all features enabled */ -# define TV_FUSE_STATE_ENABLED (0 << 4) -/** Read-only state that reports that Macrovision is disabled in hardware*/ -# define TV_FUSE_STATE_NO_MACROVISION (1 << 4) -/** Read-only state that reports that TV-out is disabled in hardware. */ -# define TV_FUSE_STATE_DISABLED (2 << 4) -/** Normal operation */ -# define TV_TEST_MODE_NORMAL (0 << 0) -/** Encoder test pattern 1 - combo pattern */ -# define TV_TEST_MODE_PATTERN_1 (1 << 0) -/** Encoder test pattern 2 - full screen vertical 75% color bars */ -# define TV_TEST_MODE_PATTERN_2 (2 << 0) -/** Encoder test pattern 3 - full screen horizontal 75% color bars */ -# define TV_TEST_MODE_PATTERN_3 (3 << 0) -/** Encoder test pattern 4 - random noise */ -# define TV_TEST_MODE_PATTERN_4 (4 << 0) -/** Encoder test pattern 5 - linear color ramps */ -# define TV_TEST_MODE_PATTERN_5 (5 << 0) -/** - * This test mode forces the DACs to 50% of full output. - * - * This is used for load detection in combination with TVDAC_SENSE_MASK - */ -# define TV_TEST_MODE_MONITOR_DETECT (7 << 0) -# define TV_TEST_MODE_MASK (7 << 0) - -#define TV_DAC 0x68004 -# define TV_DAC_SAVE 0x00ffff00 -/** - * Reports that DAC state change logic has reported change (RO). - * - * This gets cleared when TV_DAC_STATE_EN is cleared -*/ -# define TVDAC_STATE_CHG (1 << 31) -# define TVDAC_SENSE_MASK (7 << 28) -/** Reports that DAC A voltage is above the detect threshold */ -# define TVDAC_A_SENSE (1 << 30) -/** Reports that DAC B voltage is above the detect threshold */ -# define TVDAC_B_SENSE (1 << 29) -/** Reports that DAC C voltage is above the detect threshold */ -# define TVDAC_C_SENSE (1 << 28) -/** - * Enables DAC state detection logic, for load-based TV detection. - * - * The PLL of the chosen pipe (in TV_CTL) must be running, and the encoder set - * to off, for load detection to work. - */ -# define TVDAC_STATE_CHG_EN (1 << 27) -/** Sets the DAC A sense value to high */ -# define TVDAC_A_SENSE_CTL (1 << 26) -/** Sets the DAC B sense value to high */ -# define TVDAC_B_SENSE_CTL (1 << 25) -/** Sets the DAC C sense value to high */ -# define TVDAC_C_SENSE_CTL (1 << 24) -/** Overrides the ENC_ENABLE and DAC voltage levels */ -# define DAC_CTL_OVERRIDE (1 << 7) -/** Sets the slew rate. Must be preserved in software */ -# define ENC_TVDAC_SLEW_FAST (1 << 6) -# define DAC_A_1_3_V (0 << 4) -# define DAC_A_1_1_V (1 << 4) -# define DAC_A_0_7_V (2 << 4) -# define DAC_A_MASK (3 << 4) -# define DAC_B_1_3_V (0 << 2) -# define DAC_B_1_1_V (1 << 2) -# define DAC_B_0_7_V (2 << 2) -# define DAC_B_MASK (3 << 2) -# define DAC_C_1_3_V (0 << 0) -# define DAC_C_1_1_V (1 << 0) -# define DAC_C_0_7_V (2 << 0) -# define DAC_C_MASK (3 << 0) - -/** - * CSC coefficients are stored in a floating point format with 9 bits of - * mantissa and 2 or 3 bits of exponent. The exponent is represented as 2**-n, - * where 2-bit exponents are unsigned n, and 3-bit exponents are signed n with - * -1 (0x3) being the only legal negative value. - */ -#define TV_CSC_Y 0x68010 -# define TV_RY_MASK 0x07ff0000 -# define TV_RY_SHIFT 16 -# define TV_GY_MASK 0x00000fff -# define TV_GY_SHIFT 0 - -#define TV_CSC_Y2 0x68014 -# define TV_BY_MASK 0x07ff0000 -# define TV_BY_SHIFT 16 -/** - * Y attenuation for component video. - * - * Stored in 1.9 fixed point. - */ -# define TV_AY_MASK 0x000003ff -# define TV_AY_SHIFT 0 - -#define TV_CSC_U 0x68018 -# define TV_RU_MASK 0x07ff0000 -# define TV_RU_SHIFT 16 -# define TV_GU_MASK 0x000007ff -# define TV_GU_SHIFT 0 - -#define TV_CSC_U2 0x6801c -# define TV_BU_MASK 0x07ff0000 -# define TV_BU_SHIFT 16 -/** - * U attenuation for component video. - * - * Stored in 1.9 fixed point. - */ -# define TV_AU_MASK 0x000003ff -# define TV_AU_SHIFT 0 - -#define TV_CSC_V 0x68020 -# define TV_RV_MASK 0x0fff0000 -# define TV_RV_SHIFT 16 -# define TV_GV_MASK 0x000007ff -# define TV_GV_SHIFT 0 - -#define TV_CSC_V2 0x68024 -# define TV_BV_MASK 0x07ff0000 -# define TV_BV_SHIFT 16 -/** - * V attenuation for component video. - * - * Stored in 1.9 fixed point. - */ -# define TV_AV_MASK 0x000007ff -# define TV_AV_SHIFT 0 - -#define TV_CLR_KNOBS 0x68028 -/** 2s-complement brightness adjustment */ -# define TV_BRIGHTNESS_MASK 0xff000000 -# define TV_BRIGHTNESS_SHIFT 24 -/** Contrast adjustment, as a 2.6 unsigned floating point number */ -# define TV_CONTRAST_MASK 0x00ff0000 -# define TV_CONTRAST_SHIFT 16 -/** Saturation adjustment, as a 2.6 unsigned floating point number */ -# define TV_SATURATION_MASK 0x0000ff00 -# define TV_SATURATION_SHIFT 8 -/** Hue adjustment, as an integer phase angle in degrees */ -# define TV_HUE_MASK 0x000000ff -# define TV_HUE_SHIFT 0 - -#define TV_CLR_LEVEL 0x6802c -/** Controls the DAC level for black */ -# define TV_BLACK_LEVEL_MASK 0x01ff0000 -# define TV_BLACK_LEVEL_SHIFT 16 -/** Controls the DAC level for blanking */ -# define TV_BLANK_LEVEL_MASK 0x000001ff -# define TV_BLANK_LEVEL_SHIFT 0 - -#define TV_H_CTL_1 0x68030 -/** Number of pixels in the hsync. */ -# define TV_HSYNC_END_MASK 0x1fff0000 -# define TV_HSYNC_END_SHIFT 16 -/** Total number of pixels minus one in the line (display and blanking). */ -# define TV_HTOTAL_MASK 0x00001fff -# define TV_HTOTAL_SHIFT 0 - -#define TV_H_CTL_2 0x68034 -/** Enables the colorburst (needed for non-component color) */ -# define TV_BURST_ENA (1 << 31) -/** Offset of the colorburst from the start of hsync, in pixels minus one. */ -# define TV_HBURST_START_SHIFT 16 -# define TV_HBURST_START_MASK 0x1fff0000 -/** Length of the colorburst */ -# define TV_HBURST_LEN_SHIFT 0 -# define TV_HBURST_LEN_MASK 0x0001fff - -#define TV_H_CTL_3 0x68038 -/** End of hblank, measured in pixels minus one from start of hsync */ -# define TV_HBLANK_END_SHIFT 16 -# define TV_HBLANK_END_MASK 0x1fff0000 -/** Start of hblank, measured in pixels minus one from start of hsync */ -# define TV_HBLANK_START_SHIFT 0 -# define TV_HBLANK_START_MASK 0x0001fff - -#define TV_V_CTL_1 0x6803c -/** XXX */ -# define TV_NBR_END_SHIFT 16 -# define TV_NBR_END_MASK 0x07ff0000 -/** XXX */ -# define TV_VI_END_F1_SHIFT 8 -# define TV_VI_END_F1_MASK 0x00003f00 -/** XXX */ -# define TV_VI_END_F2_SHIFT 0 -# define TV_VI_END_F2_MASK 0x0000003f - -#define TV_V_CTL_2 0x68040 -/** Length of vsync, in half lines */ -# define TV_VSYNC_LEN_MASK 0x07ff0000 -# define TV_VSYNC_LEN_SHIFT 16 -/** Offset of the start of vsync in field 1, measured in one less than the - * number of half lines. - */ -# define TV_VSYNC_START_F1_MASK 0x00007f00 -# define TV_VSYNC_START_F1_SHIFT 8 -/** - * Offset of the start of vsync in field 2, measured in one less than the - * number of half lines. - */ -# define TV_VSYNC_START_F2_MASK 0x0000007f -# define TV_VSYNC_START_F2_SHIFT 0 - -#define TV_V_CTL_3 0x68044 -/** Enables generation of the equalization signal */ -# define TV_EQUAL_ENA (1 << 31) -/** Length of vsync, in half lines */ -# define TV_VEQ_LEN_MASK 0x007f0000 -# define TV_VEQ_LEN_SHIFT 16 -/** Offset of the start of equalization in field 1, measured in one less than - * the number of half lines. - */ -# define TV_VEQ_START_F1_MASK 0x0007f00 -# define TV_VEQ_START_F1_SHIFT 8 -/** - * Offset of the start of equalization in field 2, measured in one less than - * the number of half lines. - */ -# define TV_VEQ_START_F2_MASK 0x000007f -# define TV_VEQ_START_F2_SHIFT 0 - -#define TV_V_CTL_4 0x68048 -/** - * Offset to start of vertical colorburst, measured in one less than the - * number of lines from vertical start. - */ -# define TV_VBURST_START_F1_MASK 0x003f0000 -# define TV_VBURST_START_F1_SHIFT 16 -/** - * Offset to the end of vertical colorburst, measured in one less than the - * number of lines from the start of NBR. - */ -# define TV_VBURST_END_F1_MASK 0x000000ff -# define TV_VBURST_END_F1_SHIFT 0 - -#define TV_V_CTL_5 0x6804c -/** - * Offset to start of vertical colorburst, measured in one less than the - * number of lines from vertical start. - */ -# define TV_VBURST_START_F2_MASK 0x003f0000 -# define TV_VBURST_START_F2_SHIFT 16 -/** - * Offset to the end of vertical colorburst, measured in one less than the - * number of lines from the start of NBR. - */ -# define TV_VBURST_END_F2_MASK 0x000000ff -# define TV_VBURST_END_F2_SHIFT 0 - -#define TV_V_CTL_6 0x68050 -/** - * Offset to start of vertical colorburst, measured in one less than the - * number of lines from vertical start. - */ -# define TV_VBURST_START_F3_MASK 0x003f0000 -# define TV_VBURST_START_F3_SHIFT 16 -/** - * Offset to the end of vertical colorburst, measured in one less than the - * number of lines from the start of NBR. - */ -# define TV_VBURST_END_F3_MASK 0x000000ff -# define TV_VBURST_END_F3_SHIFT 0 - -#define TV_V_CTL_7 0x68054 -/** - * Offset to start of vertical colorburst, measured in one less than the - * number of lines from vertical start. - */ -# define TV_VBURST_START_F4_MASK 0x003f0000 -# define TV_VBURST_START_F4_SHIFT 16 -/** - * Offset to the end of vertical colorburst, measured in one less than the - * number of lines from the start of NBR. - */ -# define TV_VBURST_END_F4_MASK 0x000000ff -# define TV_VBURST_END_F4_SHIFT 0 - -#define TV_SC_CTL_1 0x68060 -/** Turns on the first subcarrier phase generation DDA */ -# define TV_SC_DDA1_EN (1 << 31) -/** Turns on the first subcarrier phase generation DDA */ -# define TV_SC_DDA2_EN (1 << 30) -/** Turns on the first subcarrier phase generation DDA */ -# define TV_SC_DDA3_EN (1 << 29) -/** Sets the subcarrier DDA to reset frequency every other field */ -# define TV_SC_RESET_EVERY_2 (0 << 24) -/** Sets the subcarrier DDA to reset frequency every fourth field */ -# define TV_SC_RESET_EVERY_4 (1 << 24) -/** Sets the subcarrier DDA to reset frequency every eighth field */ -# define TV_SC_RESET_EVERY_8 (2 << 24) -/** Sets the subcarrier DDA to never reset the frequency */ -# define TV_SC_RESET_NEVER (3 << 24) -/** Sets the peak amplitude of the colorburst.*/ -# define TV_BURST_LEVEL_MASK 0x00ff0000 -# define TV_BURST_LEVEL_SHIFT 16 -/** Sets the increment of the first subcarrier phase generation DDA */ -# define TV_SCDDA1_INC_MASK 0x00000fff -# define TV_SCDDA1_INC_SHIFT 0 - -#define TV_SC_CTL_2 0x68064 -/** Sets the rollover for the second subcarrier phase generation DDA */ -# define TV_SCDDA2_SIZE_MASK 0x7fff0000 -# define TV_SCDDA2_SIZE_SHIFT 16 -/** Sets the increent of the second subcarrier phase generation DDA */ -# define TV_SCDDA2_INC_MASK 0x00007fff -# define TV_SCDDA2_INC_SHIFT 0 - -#define TV_SC_CTL_3 0x68068 -/** Sets the rollover for the third subcarrier phase generation DDA */ -# define TV_SCDDA3_SIZE_MASK 0x7fff0000 -# define TV_SCDDA3_SIZE_SHIFT 16 -/** Sets the increent of the third subcarrier phase generation DDA */ -# define TV_SCDDA3_INC_MASK 0x00007fff -# define TV_SCDDA3_INC_SHIFT 0 - -#define TV_WIN_POS 0x68070 -/** X coordinate of the display from the start of horizontal active */ -# define TV_XPOS_MASK 0x1fff0000 -# define TV_XPOS_SHIFT 16 -/** Y coordinate of the display from the start of vertical active (NBR) */ -# define TV_YPOS_MASK 0x00000fff -# define TV_YPOS_SHIFT 0 - -#define TV_WIN_SIZE 0x68074 -/** Horizontal size of the display window, measured in pixels*/ -# define TV_XSIZE_MASK 0x1fff0000 -# define TV_XSIZE_SHIFT 16 -/** - * Vertical size of the display window, measured in pixels. - * - * Must be even for interlaced modes. - */ -# define TV_YSIZE_MASK 0x00000fff -# define TV_YSIZE_SHIFT 0 - -#define TV_FILTER_CTL_1 0x68080 -/** - * Enables automatic scaling calculation. - * - * If set, the rest of the registers are ignored, and the calculated values can - * be read back from the register. - */ -# define TV_AUTO_SCALE (1 << 31) -/** - * Disables the vertical filter. - * - * This is required on modes more than 1024 pixels wide */ -# define TV_V_FILTER_BYPASS (1 << 29) -/** Enables adaptive vertical filtering */ -# define TV_VADAPT (1 << 28) -# define TV_VADAPT_MODE_MASK (3 << 26) -/** Selects the least adaptive vertical filtering mode */ -# define TV_VADAPT_MODE_LEAST (0 << 26) -/** Selects the moderately adaptive vertical filtering mode */ -# define TV_VADAPT_MODE_MODERATE (1 << 26) -/** Selects the most adaptive vertical filtering mode */ -# define TV_VADAPT_MODE_MOST (3 << 26) -/** - * Sets the horizontal scaling factor. - * - * This should be the fractional part of the horizontal scaling factor divided - * by the oversampling rate. TV_HSCALE should be less than 1, and set to: - * - * (src width - 1) / ((oversample * dest width) - 1) - */ -# define TV_HSCALE_FRAC_MASK 0x00003fff -# define TV_HSCALE_FRAC_SHIFT 0 - -#define TV_FILTER_CTL_2 0x68084 -/** - * Sets the integer part of the 3.15 fixed-point vertical scaling factor. - * - * TV_VSCALE should be (src height - 1) / ((interlace * dest height) - 1) - */ -# define TV_VSCALE_INT_MASK 0x00038000 -# define TV_VSCALE_INT_SHIFT 15 -/** - * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. - * - * \sa TV_VSCALE_INT_MASK - */ -# define TV_VSCALE_FRAC_MASK 0x00007fff -# define TV_VSCALE_FRAC_SHIFT 0 - -#define TV_FILTER_CTL_3 0x68088 -/** - * Sets the integer part of the 3.15 fixed-point vertical scaling factor. - * - * TV_VSCALE should be (src height - 1) / (1/4 * (dest height - 1)) - * - * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. - */ -# define TV_VSCALE_IP_INT_MASK 0x00038000 -# define TV_VSCALE_IP_INT_SHIFT 15 -/** - * Sets the fractional part of the 3.15 fixed-point vertical scaling factor. - * - * For progressive modes, TV_VSCALE_IP_INT should be set to zeroes. - * - * \sa TV_VSCALE_IP_INT_MASK - */ -# define TV_VSCALE_IP_FRAC_MASK 0x00007fff -# define TV_VSCALE_IP_FRAC_SHIFT 0 - -#define TV_CC_CONTROL 0x68090 -# define TV_CC_ENABLE (1 << 31) -/** - * Specifies which field to send the CC data in. - * - * CC data is usually sent in field 0. - */ -# define TV_CC_FID_MASK (1 << 27) -# define TV_CC_FID_SHIFT 27 -/** Sets the horizontal position of the CC data. Usually 135. */ -# define TV_CC_HOFF_MASK 0x03ff0000 -# define TV_CC_HOFF_SHIFT 16 -/** Sets the vertical position of the CC data. Usually 21 */ -# define TV_CC_LINE_MASK 0x0000003f -# define TV_CC_LINE_SHIFT 0 - -#define TV_CC_DATA 0x68094 -# define TV_CC_RDY (1 << 31) -/** Second word of CC data to be transmitted. */ -# define TV_CC_DATA_2_MASK 0x007f0000 -# define TV_CC_DATA_2_SHIFT 16 -/** First word of CC data to be transmitted. */ -# define TV_CC_DATA_1_MASK 0x0000007f -# define TV_CC_DATA_1_SHIFT 0 - -#define TV_H_LUMA_0 0x68100 -#define TV_H_LUMA_59 0x681ec -#define TV_H_CHROMA_0 0x68200 -#define TV_H_CHROMA_59 0x682ec -#define TV_V_LUMA_0 0x68300 -#define TV_V_LUMA_42 0x683a8 -#define TV_V_CHROMA_0 0x68400 -#define TV_V_CHROMA_42 0x684a8 - -/* Display Port */ -#define DP_A 0x64000 /* eDP */ -#define DP_B 0x64100 -#define DP_C 0x64200 -#define DP_D 0x64300 - -#define DP_PORT_EN (1 << 31) -#define DP_PIPEB_SELECT (1 << 30) -#define DP_PIPE_MASK (1 << 30) - -/* Link training mode - select a suitable mode for each stage */ -#define DP_LINK_TRAIN_PAT_1 (0 << 28) -#define DP_LINK_TRAIN_PAT_2 (1 << 28) -#define DP_LINK_TRAIN_PAT_IDLE (2 << 28) -#define DP_LINK_TRAIN_OFF (3 << 28) -#define DP_LINK_TRAIN_MASK (3 << 28) -#define DP_LINK_TRAIN_SHIFT 28 - -/* CPT Link training mode */ -#define DP_LINK_TRAIN_PAT_1_CPT (0 << 8) -#define DP_LINK_TRAIN_PAT_2_CPT (1 << 8) -#define DP_LINK_TRAIN_PAT_IDLE_CPT (2 << 8) -#define DP_LINK_TRAIN_OFF_CPT (3 << 8) -#define DP_LINK_TRAIN_MASK_CPT (7 << 8) -#define DP_LINK_TRAIN_SHIFT_CPT 8 - -/* Signal voltages. These are mostly controlled by the other end */ -#define DP_VOLTAGE_0_4 (0 << 25) -#define DP_VOLTAGE_0_6 (1 << 25) -#define DP_VOLTAGE_0_8 (2 << 25) -#define DP_VOLTAGE_1_2 (3 << 25) -#define DP_VOLTAGE_MASK (7 << 25) -#define DP_VOLTAGE_SHIFT 25 - -/* Signal pre-emphasis levels, like voltages, the other end tells us what - * they want - */ -#define DP_PRE_EMPHASIS_0 (0 << 22) -#define DP_PRE_EMPHASIS_3_5 (1 << 22) -#define DP_PRE_EMPHASIS_6 (2 << 22) -#define DP_PRE_EMPHASIS_9_5 (3 << 22) -#define DP_PRE_EMPHASIS_MASK (7 << 22) -#define DP_PRE_EMPHASIS_SHIFT 22 - -/* How many wires to use. I guess 3 was too hard */ -#define DP_PORT_WIDTH(width) (((width) - 1) << 19) -#define DP_PORT_WIDTH_MASK (7 << 19) - -/* Mystic DPCD version 1.1 special mode */ -#define DP_ENHANCED_FRAMING (1 << 18) - -/* eDP */ -#define DP_PLL_FREQ_270MHZ (0 << 16) -#define DP_PLL_FREQ_160MHZ (1 << 16) -#define DP_PLL_FREQ_MASK (3 << 16) - -/** locked once port is enabled */ -#define DP_PORT_REVERSAL (1 << 15) - -/* eDP */ -#define DP_PLL_ENABLE (1 << 14) - -/** sends the clock on lane 15 of the PEG for debug */ -#define DP_CLOCK_OUTPUT_ENABLE (1 << 13) - -#define DP_SCRAMBLING_DISABLE (1 << 12) -#define DP_SCRAMBLING_DISABLE_IRONLAKE (1 << 7) - -/** limit RGB values to avoid confusing TVs */ -#define DP_COLOR_RANGE_16_235 (1 << 8) - -/** Turn on the audio link */ -#define DP_AUDIO_OUTPUT_ENABLE (1 << 6) - -/** vs and hs sync polarity */ -#define DP_SYNC_VS_HIGH (1 << 4) -#define DP_SYNC_HS_HIGH (1 << 3) -/** A fantasy */ -#define DP_DETECTED (1 << 2) - -/** The aux channel provides a way to talk to the - * signal sink for DDC etc. Max packet size supported - * is 20 bytes in each direction, hence the 5 fixed - * data registers - */ -#define DPA_AUX_CH_CTL 0x64010 -#define DPA_AUX_CH_DATA1 0x64014 -#define DPA_AUX_CH_DATA2 0x64018 -#define DPA_AUX_CH_DATA3 0x6401c -#define DPA_AUX_CH_DATA4 0x64020 -#define DPA_AUX_CH_DATA5 0x64024 - -#define DPB_AUX_CH_CTL 0x64110 -#define DPB_AUX_CH_DATA1 0x64114 -#define DPB_AUX_CH_DATA2 0x64118 -#define DPB_AUX_CH_DATA3 0x6411c -#define DPB_AUX_CH_DATA4 0x64120 -#define DPB_AUX_CH_DATA5 0x64124 - -#define DPC_AUX_CH_CTL 0x64210 -#define DPC_AUX_CH_DATA1 0x64214 -#define DPC_AUX_CH_DATA2 0x64218 -#define DPC_AUX_CH_DATA3 0x6421c -#define DPC_AUX_CH_DATA4 0x64220 -#define DPC_AUX_CH_DATA5 0x64224 - -#define DPD_AUX_CH_CTL 0x64310 -#define DPD_AUX_CH_DATA1 0x64314 -#define DPD_AUX_CH_DATA2 0x64318 -#define DPD_AUX_CH_DATA3 0x6431c -#define DPD_AUX_CH_DATA4 0x64320 -#define DPD_AUX_CH_DATA5 0x64324 - -#define DP_AUX_CH_CTL_SEND_BUSY (1 << 31) -#define DP_AUX_CH_CTL_DONE (1 << 30) -#define DP_AUX_CH_CTL_INTERRUPT (1 << 29) -#define DP_AUX_CH_CTL_TIME_OUT_ERROR (1 << 28) -#define DP_AUX_CH_CTL_TIME_OUT_400us (0 << 26) -#define DP_AUX_CH_CTL_TIME_OUT_600us (1 << 26) -#define DP_AUX_CH_CTL_TIME_OUT_800us (2 << 26) -#define DP_AUX_CH_CTL_TIME_OUT_1600us (3 << 26) -#define DP_AUX_CH_CTL_TIME_OUT_MASK (3 << 26) -#define DP_AUX_CH_CTL_RECEIVE_ERROR (1 << 25) -#define DP_AUX_CH_CTL_MESSAGE_SIZE_MASK (0x1f << 20) -#define DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT 20 -#define DP_AUX_CH_CTL_PRECHARGE_2US_MASK (0xf << 16) -#define DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT 16 -#define DP_AUX_CH_CTL_AUX_AKSV_SELECT (1 << 15) -#define DP_AUX_CH_CTL_MANCHESTER_TEST (1 << 14) -#define DP_AUX_CH_CTL_SYNC_TEST (1 << 13) -#define DP_AUX_CH_CTL_DEGLITCH_TEST (1 << 12) -#define DP_AUX_CH_CTL_PRECHARGE_TEST (1 << 11) -#define DP_AUX_CH_CTL_BIT_CLOCK_2X_MASK (0x7ff) -#define DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT 0 - -/* - * Computing GMCH M and N values for the Display Port link - * - * GMCH M/N = dot clock * bytes per pixel / ls_clk * # of lanes - * - * ls_clk (we assume) is the DP link clock (1.62 or 2.7 GHz) - * - * The GMCH value is used internally - * - * bytes_per_pixel is the number of bytes coming out of the plane, - * which is after the LUTs, so we want the bytes for our color format. - * For our current usage, this is always 3, one byte for R, G and B. - */ -#define _PIPEA_DATA_M_G4X 0x70050 -#define _PIPEB_DATA_M_G4X 0x71050 - -/* Transfer unit size for display port - 1, default is 0x3f (for TU size 64) */ -#define TU_SIZE(x) (((x)-1) << 25) /* default size 64 */ -#define TU_SIZE_SHIFT 25 -#define TU_SIZE_MASK (0x3f << 25) - -#define DATA_LINK_M_N_MASK (0xffffff) -#define DATA_LINK_N_MAX (0x800000) - -#define _PIPEA_DATA_N_G4X 0x70054 -#define _PIPEB_DATA_N_G4X 0x71054 -#define PIPE_GMCH_DATA_N_MASK (0xffffff) - -/* - * Computing Link M and N values for the Display Port link - * - * Link M / N = pixel_clock / ls_clk - * - * (the DP spec calls pixel_clock the 'strm_clk') - * - * The Link value is transmitted in the Main Stream - * Attributes and VB-ID. - */ - -#define _PIPEA_LINK_M_G4X 0x70060 -#define _PIPEB_LINK_M_G4X 0x71060 -#define PIPEA_DP_LINK_M_MASK (0xffffff) - -#define _PIPEA_LINK_N_G4X 0x70064 -#define _PIPEB_LINK_N_G4X 0x71064 -#define PIPEA_DP_LINK_N_MASK (0xffffff) - -#define PIPE_DATA_M_G4X(pipe) _PIPE(pipe, _PIPEA_DATA_M_G4X, _PIPEB_DATA_M_G4X) -#define PIPE_DATA_N_G4X(pipe) _PIPE(pipe, _PIPEA_DATA_N_G4X, _PIPEB_DATA_N_G4X) -#define PIPE_LINK_M_G4X(pipe) _PIPE(pipe, _PIPEA_LINK_M_G4X, _PIPEB_LINK_M_G4X) -#define PIPE_LINK_N_G4X(pipe) _PIPE(pipe, _PIPEA_LINK_N_G4X, _PIPEB_LINK_N_G4X) - -/* Display & cursor control */ - -/* Pipe A */ -#define _PIPEADSL (dev_priv->info->display_mmio_offset + 0x70000) -#define DSL_LINEMASK_GEN2 0x00000fff -#define DSL_LINEMASK_GEN3 0x00001fff -#define _PIPEACONF (dev_priv->info->display_mmio_offset + 0x70008) -#define PIPECONF_ENABLE (1<<31) -#define PIPECONF_DISABLE 0 -#define PIPECONF_DOUBLE_WIDE (1<<30) -#define I965_PIPECONF_ACTIVE (1<<30) -#define PIPECONF_FRAME_START_DELAY_MASK (3<<27) -#define PIPECONF_SINGLE_WIDE 0 -#define PIPECONF_PIPE_UNLOCKED 0 -#define PIPECONF_PIPE_LOCKED (1<<25) -#define PIPECONF_PALETTE 0 -#define PIPECONF_GAMMA (1<<24) -#define PIPECONF_FORCE_BORDER (1<<25) -#define PIPECONF_INTERLACE_MASK (7 << 21) -#define PIPECONF_INTERLACE_MASK_HSW (3 << 21) -/* Note that pre-gen3 does not support interlaced display directly. Panel - * fitting must be disabled on pre-ilk for interlaced. */ -#define PIPECONF_PROGRESSIVE (0 << 21) -#define PIPECONF_INTERLACE_W_SYNC_SHIFT_PANEL (4 << 21) /* gen4 only */ -#define PIPECONF_INTERLACE_W_SYNC_SHIFT (5 << 21) /* gen4 only */ -#define PIPECONF_INTERLACE_W_FIELD_INDICATION (6 << 21) -#define PIPECONF_INTERLACE_FIELD_0_ONLY (7 << 21) /* gen3 only */ -/* Ironlake and later have a complete new set of values for interlaced. PFIT - * means panel fitter required, PF means progressive fetch, DBL means power - * saving pixel doubling. */ -#define PIPECONF_PFIT_PF_INTERLACED_ILK (1 << 21) -#define PIPECONF_INTERLACED_ILK (3 << 21) -#define PIPECONF_INTERLACED_DBL_ILK (4 << 21) /* ilk/snb only */ -#define PIPECONF_PFIT_PF_INTERLACED_DBL_ILK (5 << 21) /* ilk/snb only */ -#define PIPECONF_INTERLACE_MODE_MASK (7 << 21) -#define PIPECONF_CXSR_DOWNCLOCK (1<<16) -#define PIPECONF_COLOR_RANGE_SELECT (1 << 13) -#define PIPECONF_BPC_MASK (0x7 << 5) -#define PIPECONF_8BPC (0<<5) -#define PIPECONF_10BPC (1<<5) -#define PIPECONF_6BPC (2<<5) -#define PIPECONF_12BPC (3<<5) -#define PIPECONF_DITHER_EN (1<<4) -#define PIPECONF_DITHER_TYPE_MASK (0x0000000c) -#define PIPECONF_DITHER_TYPE_SP (0<<2) -#define PIPECONF_DITHER_TYPE_ST1 (1<<2) -#define PIPECONF_DITHER_TYPE_ST2 (2<<2) -#define PIPECONF_DITHER_TYPE_TEMP (3<<2) -#define _PIPEASTAT (dev_priv->info->display_mmio_offset + 0x70024) -#define PIPE_FIFO_UNDERRUN_STATUS (1UL<<31) -#define SPRITE1_FLIPDONE_INT_EN_VLV (1UL<<30) -#define PIPE_CRC_ERROR_ENABLE (1UL<<29) -#define PIPE_CRC_DONE_ENABLE (1UL<<28) -#define PIPE_GMBUS_EVENT_ENABLE (1UL<<27) -#define PLANE_FLIP_DONE_INT_EN_VLV (1UL<<26) -#define PIPE_HOTPLUG_INTERRUPT_ENABLE (1UL<<26) -#define PIPE_VSYNC_INTERRUPT_ENABLE (1UL<<25) -#define PIPE_DISPLAY_LINE_COMPARE_ENABLE (1UL<<24) -#define PIPE_DPST_EVENT_ENABLE (1UL<<23) -#define SPRITE0_FLIP_DONE_INT_EN_VLV (1UL<<22) -#define PIPE_LEGACY_BLC_EVENT_ENABLE (1UL<<22) -#define PIPE_ODD_FIELD_INTERRUPT_ENABLE (1UL<<21) -#define PIPE_EVEN_FIELD_INTERRUPT_ENABLE (1UL<<20) -#define PIPE_HOTPLUG_TV_INTERRUPT_ENABLE (1UL<<18) /* pre-965 */ -#define PIPE_START_VBLANK_INTERRUPT_ENABLE (1UL<<18) /* 965 or later */ -#define PIPE_VBLANK_INTERRUPT_ENABLE (1UL<<17) -#define PIPEA_HBLANK_INT_EN_VLV (1UL<<16) -#define PIPE_OVERLAY_UPDATED_ENABLE (1UL<<16) -#define SPRITE1_FLIPDONE_INT_STATUS_VLV (1UL<<15) -#define SPRITE0_FLIPDONE_INT_STATUS_VLV (1UL<<14) -#define PIPE_CRC_ERROR_INTERRUPT_STATUS (1UL<<13) -#define PIPE_CRC_DONE_INTERRUPT_STATUS (1UL<<12) -#define PIPE_GMBUS_INTERRUPT_STATUS (1UL<<11) -#define PLANE_FLIPDONE_INT_STATUS_VLV (1UL<<10) -#define PIPE_HOTPLUG_INTERRUPT_STATUS (1UL<<10) -#define PIPE_VSYNC_INTERRUPT_STATUS (1UL<<9) -#define PIPE_DISPLAY_LINE_COMPARE_STATUS (1UL<<8) -#define PIPE_DPST_EVENT_STATUS (1UL<<7) -#define PIPE_LEGACY_BLC_EVENT_STATUS (1UL<<6) -#define PIPE_ODD_FIELD_INTERRUPT_STATUS (1UL<<5) -#define PIPE_EVEN_FIELD_INTERRUPT_STATUS (1UL<<4) -#define PIPE_HOTPLUG_TV_INTERRUPT_STATUS (1UL<<2) /* pre-965 */ -#define PIPE_START_VBLANK_INTERRUPT_STATUS (1UL<<2) /* 965 or later */ -#define PIPE_VBLANK_INTERRUPT_STATUS (1UL<<1) -#define PIPE_OVERLAY_UPDATED_STATUS (1UL<<0) - -#define PIPESRC(pipe) _PIPE(pipe, _PIPEASRC, _PIPEBSRC) -#define PIPECONF(tran) _TRANSCODER(tran, _PIPEACONF, _PIPEBCONF) -#define PIPEDSL(pipe) _PIPE(pipe, _PIPEADSL, _PIPEBDSL) -#define PIPEFRAME(pipe) _PIPE(pipe, _PIPEAFRAMEHIGH, _PIPEBFRAMEHIGH) -#define PIPEFRAMEPIXEL(pipe) _PIPE(pipe, _PIPEAFRAMEPIXEL, _PIPEBFRAMEPIXEL) -#define PIPESTAT(pipe) _PIPE(pipe, _PIPEASTAT, _PIPEBSTAT) - -#define VLV_DPFLIPSTAT (VLV_DISPLAY_BASE + 0x70028) -#define PIPEB_LINE_COMPARE_INT_EN (1<<29) -#define PIPEB_HLINE_INT_EN (1<<28) -#define PIPEB_VBLANK_INT_EN (1<<27) -#define SPRITED_FLIPDONE_INT_EN (1<<26) -#define SPRITEC_FLIPDONE_INT_EN (1<<25) -#define PLANEB_FLIPDONE_INT_EN (1<<24) -#define PIPEA_LINE_COMPARE_INT_EN (1<<21) -#define PIPEA_HLINE_INT_EN (1<<20) -#define PIPEA_VBLANK_INT_EN (1<<19) -#define SPRITEB_FLIPDONE_INT_EN (1<<18) -#define SPRITEA_FLIPDONE_INT_EN (1<<17) -#define PLANEA_FLIPDONE_INT_EN (1<<16) - -#define DPINVGTT (VLV_DISPLAY_BASE + 0x7002c) /* VLV only */ -#define CURSORB_INVALID_GTT_INT_EN (1<<23) -#define CURSORA_INVALID_GTT_INT_EN (1<<22) -#define SPRITED_INVALID_GTT_INT_EN (1<<21) -#define SPRITEC_INVALID_GTT_INT_EN (1<<20) -#define PLANEB_INVALID_GTT_INT_EN (1<<19) -#define SPRITEB_INVALID_GTT_INT_EN (1<<18) -#define SPRITEA_INVALID_GTT_INT_EN (1<<17) -#define PLANEA_INVALID_GTT_INT_EN (1<<16) -#define DPINVGTT_EN_MASK 0xff0000 -#define CURSORB_INVALID_GTT_STATUS (1<<7) -#define CURSORA_INVALID_GTT_STATUS (1<<6) -#define SPRITED_INVALID_GTT_STATUS (1<<5) -#define SPRITEC_INVALID_GTT_STATUS (1<<4) -#define PLANEB_INVALID_GTT_STATUS (1<<3) -#define SPRITEB_INVALID_GTT_STATUS (1<<2) -#define SPRITEA_INVALID_GTT_STATUS (1<<1) -#define PLANEA_INVALID_GTT_STATUS (1<<0) -#define DPINVGTT_STATUS_MASK 0xff - -#define DSPARB 0x70030 -#define DSPARB_CSTART_MASK (0x7f << 7) -#define DSPARB_CSTART_SHIFT 7 -#define DSPARB_BSTART_MASK (0x7f) -#define DSPARB_BSTART_SHIFT 0 -#define DSPARB_BEND_SHIFT 9 /* on 855 */ -#define DSPARB_AEND_SHIFT 0 - -#define DSPFW1 (dev_priv->info->display_mmio_offset + 0x70034) -#define DSPFW_SR_SHIFT 23 -#define DSPFW_SR_MASK (0x1ff<<23) -#define DSPFW_CURSORB_SHIFT 16 -#define DSPFW_CURSORB_MASK (0x3f<<16) -#define DSPFW_PLANEB_SHIFT 8 -#define DSPFW_PLANEB_MASK (0x7f<<8) -#define DSPFW_PLANEA_MASK (0x7f) -#define DSPFW2 (dev_priv->info->display_mmio_offset + 0x70038) -#define DSPFW_CURSORA_MASK 0x00003f00 -#define DSPFW_CURSORA_SHIFT 8 -#define DSPFW_PLANEC_MASK (0x7f) -#define DSPFW3 (dev_priv->info->display_mmio_offset + 0x7003c) -#define DSPFW_HPLL_SR_EN (1<<31) -#define DSPFW_CURSOR_SR_SHIFT 24 -#define PINEVIEW_SELF_REFRESH_EN (1<<30) -#define DSPFW_CURSOR_SR_MASK (0x3f<<24) -#define DSPFW_HPLL_CURSOR_SHIFT 16 -#define DSPFW_HPLL_CURSOR_MASK (0x3f<<16) -#define DSPFW_HPLL_SR_MASK (0x1ff) -#define DSPFW4 (dev_priv->info->display_mmio_offset + 0x70070) -#define DSPFW7 (dev_priv->info->display_mmio_offset + 0x7007c) - -/* drain latency register values*/ -#define DRAIN_LATENCY_PRECISION_32 32 -#define DRAIN_LATENCY_PRECISION_16 16 -#define VLV_DDL1 (VLV_DISPLAY_BASE + 0x70050) -#define DDL_CURSORA_PRECISION_32 (1<<31) -#define DDL_CURSORA_PRECISION_16 (0<<31) -#define DDL_CURSORA_SHIFT 24 -#define DDL_PLANEA_PRECISION_32 (1<<7) -#define DDL_PLANEA_PRECISION_16 (0<<7) -#define VLV_DDL2 (VLV_DISPLAY_BASE + 0x70054) -#define DDL_CURSORB_PRECISION_32 (1<<31) -#define DDL_CURSORB_PRECISION_16 (0<<31) -#define DDL_CURSORB_SHIFT 24 -#define DDL_PLANEB_PRECISION_32 (1<<7) -#define DDL_PLANEB_PRECISION_16 (0<<7) - -/* FIFO watermark sizes etc */ -#define G4X_FIFO_LINE_SIZE 64 -#define I915_FIFO_LINE_SIZE 64 -#define I830_FIFO_LINE_SIZE 32 - -#define VALLEYVIEW_FIFO_SIZE 255 -#define G4X_FIFO_SIZE 127 -#define I965_FIFO_SIZE 512 -#define I945_FIFO_SIZE 127 -#define I915_FIFO_SIZE 95 -#define I855GM_FIFO_SIZE 127 /* In cachelines */ -#define I830_FIFO_SIZE 95 - -#define VALLEYVIEW_MAX_WM 0xff -#define G4X_MAX_WM 0x3f -#define I915_MAX_WM 0x3f - -#define PINEVIEW_DISPLAY_FIFO 512 /* in 64byte unit */ -#define PINEVIEW_FIFO_LINE_SIZE 64 -#define PINEVIEW_MAX_WM 0x1ff -#define PINEVIEW_DFT_WM 0x3f -#define PINEVIEW_DFT_HPLLOFF_WM 0 -#define PINEVIEW_GUARD_WM 10 -#define PINEVIEW_CURSOR_FIFO 64 -#define PINEVIEW_CURSOR_MAX_WM 0x3f -#define PINEVIEW_CURSOR_DFT_WM 0 -#define PINEVIEW_CURSOR_GUARD_WM 5 - -#define VALLEYVIEW_CURSOR_MAX_WM 64 -#define I965_CURSOR_FIFO 64 -#define I965_CURSOR_MAX_WM 32 -#define I965_CURSOR_DFT_WM 8 - -/* define the Watermark register on Ironlake */ -#define WM0_PIPEA_ILK 0x45100 -#define WM0_PIPE_PLANE_MASK (0x7f<<16) -#define WM0_PIPE_PLANE_SHIFT 16 -#define WM0_PIPE_SPRITE_MASK (0x3f<<8) -#define WM0_PIPE_SPRITE_SHIFT 8 -#define WM0_PIPE_CURSOR_MASK (0x1f) - -#define WM0_PIPEB_ILK 0x45104 -#define WM0_PIPEC_IVB 0x45200 -#define WM1_LP_ILK 0x45108 -#define WM1_LP_SR_EN (1<<31) -#define WM1_LP_LATENCY_SHIFT 24 -#define WM1_LP_LATENCY_MASK (0x7f<<24) -#define WM1_LP_FBC_MASK (0xf<<20) -#define WM1_LP_FBC_SHIFT 20 -#define WM1_LP_SR_MASK (0x1ff<<8) -#define WM1_LP_SR_SHIFT 8 -#define WM1_LP_CURSOR_MASK (0x3f) -#define WM2_LP_ILK 0x4510c -#define WM2_LP_EN (1<<31) -#define WM3_LP_ILK 0x45110 -#define WM3_LP_EN (1<<31) -#define WM1S_LP_ILK 0x45120 -#define WM2S_LP_IVB 0x45124 -#define WM3S_LP_IVB 0x45128 -#define WM1S_LP_EN (1<<31) - -#define HSW_WM_LP_VAL(lat, fbc, pri, cur) \ - (WM3_LP_EN | ((lat) << WM1_LP_LATENCY_SHIFT) | \ - ((fbc) << WM1_LP_FBC_SHIFT) | ((pri) << WM1_LP_SR_SHIFT) | (cur)) - -/* Memory latency timer register */ -#define MLTR_ILK 0x11222 -#define MLTR_WM1_SHIFT 0 -#define MLTR_WM2_SHIFT 8 -/* the unit of memory self-refresh latency time is 0.5us */ -#define ILK_SRLT_MASK 0x3f -#define ILK_LATENCY(shift) (I915_READ(MLTR_ILK) >> (shift) & ILK_SRLT_MASK) -#define ILK_READ_WM1_LATENCY() ILK_LATENCY(MLTR_WM1_SHIFT) -#define ILK_READ_WM2_LATENCY() ILK_LATENCY(MLTR_WM2_SHIFT) - -/* define the fifo size on Ironlake */ -#define ILK_DISPLAY_FIFO 128 -#define ILK_DISPLAY_MAXWM 64 -#define ILK_DISPLAY_DFTWM 8 -#define ILK_CURSOR_FIFO 32 -#define ILK_CURSOR_MAXWM 16 -#define ILK_CURSOR_DFTWM 8 - -#define ILK_DISPLAY_SR_FIFO 512 -#define ILK_DISPLAY_MAX_SRWM 0x1ff -#define ILK_DISPLAY_DFT_SRWM 0x3f -#define ILK_CURSOR_SR_FIFO 64 -#define ILK_CURSOR_MAX_SRWM 0x3f -#define ILK_CURSOR_DFT_SRWM 8 - -#define ILK_FIFO_LINE_SIZE 64 - -/* define the WM info on Sandybridge */ -#define SNB_DISPLAY_FIFO 128 -#define SNB_DISPLAY_MAXWM 0x7f /* bit 16:22 */ -#define SNB_DISPLAY_DFTWM 8 -#define SNB_CURSOR_FIFO 32 -#define SNB_CURSOR_MAXWM 0x1f /* bit 4:0 */ -#define SNB_CURSOR_DFTWM 8 - -#define SNB_DISPLAY_SR_FIFO 512 -#define SNB_DISPLAY_MAX_SRWM 0x1ff /* bit 16:8 */ -#define SNB_DISPLAY_DFT_SRWM 0x3f -#define SNB_CURSOR_SR_FIFO 64 -#define SNB_CURSOR_MAX_SRWM 0x3f /* bit 5:0 */ -#define SNB_CURSOR_DFT_SRWM 8 - -#define SNB_FBC_MAX_SRWM 0xf /* bit 23:20 */ - -#define SNB_FIFO_LINE_SIZE 64 - - -/* the address where we get all kinds of latency value */ -#define SSKPD 0x5d10 -#define SSKPD_WM_MASK 0x3f -#define SSKPD_WM0_SHIFT 0 -#define SSKPD_WM1_SHIFT 8 -#define SSKPD_WM2_SHIFT 16 -#define SSKPD_WM3_SHIFT 24 - -#define SNB_LATENCY(shift) (I915_READ(MCHBAR_MIRROR_BASE_SNB + SSKPD) >> (shift) & SSKPD_WM_MASK) -#define SNB_READ_WM0_LATENCY() SNB_LATENCY(SSKPD_WM0_SHIFT) -#define SNB_READ_WM1_LATENCY() SNB_LATENCY(SSKPD_WM1_SHIFT) -#define SNB_READ_WM2_LATENCY() SNB_LATENCY(SSKPD_WM2_SHIFT) -#define SNB_READ_WM3_LATENCY() SNB_LATENCY(SSKPD_WM3_SHIFT) +#define VDECCLK_GATE_D _MMIO(0x620C) /* g4x only */ +#define VCP_UNIT_CLOCK_GATE_DISABLE (1 << 4) + +#define RAMCLK_GATE_D _MMIO(0x6210) /* CRL only */ +#define DEUC _MMIO(0x6214) /* CRL only */ + +#define BXT_RP_STATE_CAP _MMIO(0x138170) +#define GEN9_RP_STATE_LIMITS _MMIO(0x138148) + +#define MTL_RP_STATE_CAP _MMIO(0x138000) +#define MTL_MEDIAP_STATE_CAP _MMIO(0x138020) +#define MTL_RP0_CAP_MASK REG_GENMASK(8, 0) +#define MTL_RPN_CAP_MASK REG_GENMASK(24, 16) + +#define MTL_GT_RPE_FREQUENCY _MMIO(0x13800c) +#define MTL_MPE_FREQUENCY _MMIO(0x13802c) +#define MTL_RPE_MASK REG_GENMASK(8, 0) + +#define GT0_PERF_LIMIT_REASONS _MMIO(0x1381a8) +#define GT0_PERF_LIMIT_REASONS_MASK 0xde3 +#define PROCHOT_MASK REG_BIT(0) +#define THERMAL_LIMIT_MASK REG_BIT(1) +#define RATL_MASK REG_BIT(5) +#define VR_THERMALERT_MASK REG_BIT(6) +#define VR_TDC_MASK REG_BIT(7) +#define POWER_LIMIT_4_MASK REG_BIT(8) +#define POWER_LIMIT_1_MASK REG_BIT(10) +#define POWER_LIMIT_2_MASK REG_BIT(11) +#define GT0_PERF_LIMIT_REASONS_LOG_MASK REG_GENMASK(31, 16) +#define MTL_MEDIA_PERF_LIMIT_REASONS _MMIO(0x138030) + +#define CHV_CLK_CTL1 _MMIO(0x101100) +#define VLV_CLK_CTL2 _MMIO(0x101104) +#define CLK_CTL2_CZCOUNT_30NS_SHIFT 28 /* - * The two pipe frame counter registers are not synchronized, so - * reading a stable value is somewhat tricky. The following code - * should work: - * - * do { - * high1 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> - * PIPE_FRAME_HIGH_SHIFT; - * low1 = ((INREG(PIPEAFRAMEPIXEL) & PIPE_FRAME_LOW_MASK) >> - * PIPE_FRAME_LOW_SHIFT); - * high2 = ((INREG(PIPEAFRAMEHIGH) & PIPE_FRAME_HIGH_MASK) >> - * PIPE_FRAME_HIGH_SHIFT); - * } while (high1 != high2); - * frame = (high1 << 8) | low1; - */ -#define _PIPEAFRAMEHIGH (dev_priv->info->display_mmio_offset + 0x70040) -#define PIPE_FRAME_HIGH_MASK 0x0000ffff -#define PIPE_FRAME_HIGH_SHIFT 0 -#define _PIPEAFRAMEPIXEL (dev_priv->info->display_mmio_offset + 0x70044) -#define PIPE_FRAME_LOW_MASK 0xff000000 -#define PIPE_FRAME_LOW_SHIFT 24 -#define PIPE_PIXEL_MASK 0x00ffffff -#define PIPE_PIXEL_SHIFT 0 -/* GM45+ just has to be different */ -#define _PIPEA_FRMCOUNT_GM45 0x70040 -#define _PIPEA_FLIPCOUNT_GM45 0x70044 -#define PIPE_FRMCOUNT_GM45(pipe) _PIPE(pipe, _PIPEA_FRMCOUNT_GM45, _PIPEB_FRMCOUNT_GM45) - -/* Cursor A & B regs */ -#define _CURACNTR (dev_priv->info->display_mmio_offset + 0x70080) -/* Old style CUR*CNTR flags (desktop 8xx) */ -#define CURSOR_ENABLE 0x80000000 -#define CURSOR_GAMMA_ENABLE 0x40000000 -#define CURSOR_STRIDE_MASK 0x30000000 -#define CURSOR_PIPE_CSC_ENABLE (1<<24) -#define CURSOR_FORMAT_SHIFT 24 -#define CURSOR_FORMAT_MASK (0x07 << CURSOR_FORMAT_SHIFT) -#define CURSOR_FORMAT_2C (0x00 << CURSOR_FORMAT_SHIFT) -#define CURSOR_FORMAT_3C (0x01 << CURSOR_FORMAT_SHIFT) -#define CURSOR_FORMAT_4C (0x02 << CURSOR_FORMAT_SHIFT) -#define CURSOR_FORMAT_ARGB (0x04 << CURSOR_FORMAT_SHIFT) -#define CURSOR_FORMAT_XRGB (0x05 << CURSOR_FORMAT_SHIFT) -/* New style CUR*CNTR flags */ -#define CURSOR_MODE 0x27 -#define CURSOR_MODE_DISABLE 0x00 -#define CURSOR_MODE_64_32B_AX 0x07 -#define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX) -#define MCURSOR_PIPE_SELECT (1 << 28) -#define MCURSOR_PIPE_A 0x00 -#define MCURSOR_PIPE_B (1 << 28) -#define MCURSOR_GAMMA_ENABLE (1 << 26) -#define _CURABASE (dev_priv->info->display_mmio_offset + 0x70084) -#define _CURAPOS (dev_priv->info->display_mmio_offset + 0x70088) -#define CURSOR_POS_MASK 0x007FF -#define CURSOR_POS_SIGN 0x8000 -#define CURSOR_X_SHIFT 0 -#define CURSOR_Y_SHIFT 16 -#define CURSIZE 0x700a0 -#define _CURBCNTR (dev_priv->info->display_mmio_offset + 0x700c0) -#define _CURBBASE (dev_priv->info->display_mmio_offset + 0x700c4) -#define _CURBPOS (dev_priv->info->display_mmio_offset + 0x700c8) - -#define _CURBCNTR_IVB 0x71080 -#define _CURBBASE_IVB 0x71084 -#define _CURBPOS_IVB 0x71088 - -#define CURCNTR(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR) -#define CURBASE(pipe) _PIPE(pipe, _CURABASE, _CURBBASE) -#define CURPOS(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS) - -#define CURCNTR_IVB(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR_IVB) -#define CURBASE_IVB(pipe) _PIPE(pipe, _CURABASE, _CURBBASE_IVB) -#define CURPOS_IVB(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS_IVB) - -/* Display A control */ -#define _DSPACNTR (dev_priv->info->display_mmio_offset + 0x70180) -#define DISPLAY_PLANE_ENABLE (1<<31) -#define DISPLAY_PLANE_DISABLE 0 -#define DISPPLANE_GAMMA_ENABLE (1<<30) -#define DISPPLANE_GAMMA_DISABLE 0 -#define DISPPLANE_PIXFORMAT_MASK (0xf<<26) -#define DISPPLANE_YUV422 (0x0<<26) -#define DISPPLANE_8BPP (0x2<<26) -#define DISPPLANE_BGRA555 (0x3<<26) -#define DISPPLANE_BGRX555 (0x4<<26) -#define DISPPLANE_BGRX565 (0x5<<26) -#define DISPPLANE_BGRX888 (0x6<<26) -#define DISPPLANE_BGRA888 (0x7<<26) -#define DISPPLANE_RGBX101010 (0x8<<26) -#define DISPPLANE_RGBA101010 (0x9<<26) -#define DISPPLANE_BGRX101010 (0xa<<26) -#define DISPPLANE_RGBX161616 (0xc<<26) -#define DISPPLANE_RGBX888 (0xe<<26) -#define DISPPLANE_RGBA888 (0xf<<26) -#define DISPPLANE_STEREO_ENABLE (1<<25) -#define DISPPLANE_STEREO_DISABLE 0 -#define DISPPLANE_PIPE_CSC_ENABLE (1<<24) -#define DISPPLANE_SEL_PIPE_SHIFT 24 -#define DISPPLANE_SEL_PIPE_MASK (3<<DISPPLANE_SEL_PIPE_SHIFT) -#define DISPPLANE_SEL_PIPE_A 0 -#define DISPPLANE_SEL_PIPE_B (1<<DISPPLANE_SEL_PIPE_SHIFT) -#define DISPPLANE_SRC_KEY_ENABLE (1<<22) -#define DISPPLANE_SRC_KEY_DISABLE 0 -#define DISPPLANE_LINE_DOUBLE (1<<20) -#define DISPPLANE_NO_LINE_DOUBLE 0 -#define DISPPLANE_STEREO_POLARITY_FIRST 0 -#define DISPPLANE_STEREO_POLARITY_SECOND (1<<18) -#define DISPPLANE_TRICKLE_FEED_DISABLE (1<<14) /* Ironlake */ -#define DISPPLANE_TILED (1<<10) -#define _DSPAADDR (dev_priv->info->display_mmio_offset + 0x70184) -#define _DSPASTRIDE (dev_priv->info->display_mmio_offset + 0x70188) -#define _DSPAPOS (dev_priv->info->display_mmio_offset + 0x7018C) /* reserved */ -#define _DSPASIZE (dev_priv->info->display_mmio_offset + 0x70190) -#define _DSPASURF (dev_priv->info->display_mmio_offset + 0x7019C) /* 965+ only */ -#define _DSPATILEOFF (dev_priv->info->display_mmio_offset + 0x701A4) /* 965+ only */ -#define _DSPAOFFSET (dev_priv->info->display_mmio_offset + 0x701A4) /* HSW */ -#define _DSPASURFLIVE (dev_priv->info->display_mmio_offset + 0x701AC) - -#define DSPCNTR(plane) _PIPE(plane, _DSPACNTR, _DSPBCNTR) -#define DSPADDR(plane) _PIPE(plane, _DSPAADDR, _DSPBADDR) -#define DSPSTRIDE(plane) _PIPE(plane, _DSPASTRIDE, _DSPBSTRIDE) -#define DSPPOS(plane) _PIPE(plane, _DSPAPOS, _DSPBPOS) -#define DSPSIZE(plane) _PIPE(plane, _DSPASIZE, _DSPBSIZE) -#define DSPSURF(plane) _PIPE(plane, _DSPASURF, _DSPBSURF) -#define DSPTILEOFF(plane) _PIPE(plane, _DSPATILEOFF, _DSPBTILEOFF) -#define DSPLINOFF(plane) DSPADDR(plane) -#define DSPOFFSET(plane) _PIPE(plane, _DSPAOFFSET, _DSPBOFFSET) -#define DSPSURFLIVE(plane) _PIPE(plane, _DSPASURFLIVE, _DSPBSURFLIVE) - -/* Display/Sprite base address macros */ -#define DISP_BASEADDR_MASK (0xfffff000) -#define I915_LO_DISPBASE(val) (val & ~DISP_BASEADDR_MASK) -#define I915_HI_DISPBASE(val) (val & DISP_BASEADDR_MASK) -#define I915_MODIFY_DISPBASE(reg, gfx_addr) \ - (I915_WRITE((reg), (gfx_addr) | I915_LO_DISPBASE(I915_READ(reg)))) - -/* VBIOS flags */ -#define SWF00 (dev_priv->info->display_mmio_offset + 0x71410) -#define SWF01 (dev_priv->info->display_mmio_offset + 0x71414) -#define SWF02 (dev_priv->info->display_mmio_offset + 0x71418) -#define SWF03 (dev_priv->info->display_mmio_offset + 0x7141c) -#define SWF04 (dev_priv->info->display_mmio_offset + 0x71420) -#define SWF05 (dev_priv->info->display_mmio_offset + 0x71424) -#define SWF06 (dev_priv->info->display_mmio_offset + 0x71428) -#define SWF10 (dev_priv->info->display_mmio_offset + 0x70410) -#define SWF11 (dev_priv->info->display_mmio_offset + 0x70414) -#define SWF14 (dev_priv->info->display_mmio_offset + 0x71420) -#define SWF30 (dev_priv->info->display_mmio_offset + 0x72414) -#define SWF31 (dev_priv->info->display_mmio_offset + 0x72418) -#define SWF32 (dev_priv->info->display_mmio_offset + 0x7241c) - -/* Pipe B */ -#define _PIPEBDSL (dev_priv->info->display_mmio_offset + 0x71000) -#define _PIPEBCONF (dev_priv->info->display_mmio_offset + 0x71008) -#define _PIPEBSTAT (dev_priv->info->display_mmio_offset + 0x71024) -#define _PIPEBFRAMEHIGH (dev_priv->info->display_mmio_offset + 0x71040) -#define _PIPEBFRAMEPIXEL (dev_priv->info->display_mmio_offset + 0x71044) -#define _PIPEB_FRMCOUNT_GM45 0x71040 -#define _PIPEB_FLIPCOUNT_GM45 0x71044 - - -/* Display B control */ -#define _DSPBCNTR (dev_priv->info->display_mmio_offset + 0x71180) -#define DISPPLANE_ALPHA_TRANS_ENABLE (1<<15) -#define DISPPLANE_ALPHA_TRANS_DISABLE 0 -#define DISPPLANE_SPRITE_ABOVE_DISPLAY 0 -#define DISPPLANE_SPRITE_ABOVE_OVERLAY (1) -#define _DSPBADDR (dev_priv->info->display_mmio_offset + 0x71184) -#define _DSPBSTRIDE (dev_priv->info->display_mmio_offset + 0x71188) -#define _DSPBPOS (dev_priv->info->display_mmio_offset + 0x7118C) -#define _DSPBSIZE (dev_priv->info->display_mmio_offset + 0x71190) -#define _DSPBSURF (dev_priv->info->display_mmio_offset + 0x7119C) -#define _DSPBTILEOFF (dev_priv->info->display_mmio_offset + 0x711A4) -#define _DSPBOFFSET (dev_priv->info->display_mmio_offset + 0x711A4) -#define _DSPBSURFLIVE (dev_priv->info->display_mmio_offset + 0x711AC) - -/* Sprite A control */ -#define _DVSACNTR 0x72180 -#define DVS_ENABLE (1<<31) -#define DVS_GAMMA_ENABLE (1<<30) -#define DVS_PIXFORMAT_MASK (3<<25) -#define DVS_FORMAT_YUV422 (0<<25) -#define DVS_FORMAT_RGBX101010 (1<<25) -#define DVS_FORMAT_RGBX888 (2<<25) -#define DVS_FORMAT_RGBX161616 (3<<25) -#define DVS_PIPE_CSC_ENABLE (1<<24) -#define DVS_SOURCE_KEY (1<<22) -#define DVS_RGB_ORDER_XBGR (1<<20) -#define DVS_YUV_BYTE_ORDER_MASK (3<<16) -#define DVS_YUV_ORDER_YUYV (0<<16) -#define DVS_YUV_ORDER_UYVY (1<<16) -#define DVS_YUV_ORDER_YVYU (2<<16) -#define DVS_YUV_ORDER_VYUY (3<<16) -#define DVS_DEST_KEY (1<<2) -#define DVS_TRICKLE_FEED_DISABLE (1<<14) -#define DVS_TILED (1<<10) -#define _DVSALINOFF 0x72184 -#define _DVSASTRIDE 0x72188 -#define _DVSAPOS 0x7218c -#define _DVSASIZE 0x72190 -#define _DVSAKEYVAL 0x72194 -#define _DVSAKEYMSK 0x72198 -#define _DVSASURF 0x7219c -#define _DVSAKEYMAXVAL 0x721a0 -#define _DVSATILEOFF 0x721a4 -#define _DVSASURFLIVE 0x721ac -#define _DVSASCALE 0x72204 -#define DVS_SCALE_ENABLE (1<<31) -#define DVS_FILTER_MASK (3<<29) -#define DVS_FILTER_MEDIUM (0<<29) -#define DVS_FILTER_ENHANCING (1<<29) -#define DVS_FILTER_SOFTENING (2<<29) -#define DVS_VERTICAL_OFFSET_HALF (1<<28) /* must be enabled below */ -#define DVS_VERTICAL_OFFSET_ENABLE (1<<27) -#define _DVSAGAMC 0x72300 - -#define _DVSBCNTR 0x73180 -#define _DVSBLINOFF 0x73184 -#define _DVSBSTRIDE 0x73188 -#define _DVSBPOS 0x7318c -#define _DVSBSIZE 0x73190 -#define _DVSBKEYVAL 0x73194 -#define _DVSBKEYMSK 0x73198 -#define _DVSBSURF 0x7319c -#define _DVSBKEYMAXVAL 0x731a0 -#define _DVSBTILEOFF 0x731a4 -#define _DVSBSURFLIVE 0x731ac -#define _DVSBSCALE 0x73204 -#define _DVSBGAMC 0x73300 - -#define DVSCNTR(pipe) _PIPE(pipe, _DVSACNTR, _DVSBCNTR) -#define DVSLINOFF(pipe) _PIPE(pipe, _DVSALINOFF, _DVSBLINOFF) -#define DVSSTRIDE(pipe) _PIPE(pipe, _DVSASTRIDE, _DVSBSTRIDE) -#define DVSPOS(pipe) _PIPE(pipe, _DVSAPOS, _DVSBPOS) -#define DVSSURF(pipe) _PIPE(pipe, _DVSASURF, _DVSBSURF) -#define DVSKEYMAX(pipe) _PIPE(pipe, _DVSAKEYMAXVAL, _DVSBKEYMAXVAL) -#define DVSSIZE(pipe) _PIPE(pipe, _DVSASIZE, _DVSBSIZE) -#define DVSSCALE(pipe) _PIPE(pipe, _DVSASCALE, _DVSBSCALE) -#define DVSTILEOFF(pipe) _PIPE(pipe, _DVSATILEOFF, _DVSBTILEOFF) -#define DVSKEYVAL(pipe) _PIPE(pipe, _DVSAKEYVAL, _DVSBKEYVAL) -#define DVSKEYMSK(pipe) _PIPE(pipe, _DVSAKEYMSK, _DVSBKEYMSK) -#define DVSSURFLIVE(pipe) _PIPE(pipe, _DVSASURFLIVE, _DVSBSURFLIVE) - -#define _SPRA_CTL 0x70280 -#define SPRITE_ENABLE (1<<31) -#define SPRITE_GAMMA_ENABLE (1<<30) -#define SPRITE_PIXFORMAT_MASK (7<<25) -#define SPRITE_FORMAT_YUV422 (0<<25) -#define SPRITE_FORMAT_RGBX101010 (1<<25) -#define SPRITE_FORMAT_RGBX888 (2<<25) -#define SPRITE_FORMAT_RGBX161616 (3<<25) -#define SPRITE_FORMAT_YUV444 (4<<25) -#define SPRITE_FORMAT_XR_BGR101010 (5<<25) /* Extended range */ -#define SPRITE_PIPE_CSC_ENABLE (1<<24) -#define SPRITE_SOURCE_KEY (1<<22) -#define SPRITE_RGB_ORDER_RGBX (1<<20) /* only for 888 and 161616 */ -#define SPRITE_YUV_TO_RGB_CSC_DISABLE (1<<19) -#define SPRITE_YUV_CSC_FORMAT_BT709 (1<<18) /* 0 is BT601 */ -#define SPRITE_YUV_BYTE_ORDER_MASK (3<<16) -#define SPRITE_YUV_ORDER_YUYV (0<<16) -#define SPRITE_YUV_ORDER_UYVY (1<<16) -#define SPRITE_YUV_ORDER_YVYU (2<<16) -#define SPRITE_YUV_ORDER_VYUY (3<<16) -#define SPRITE_TRICKLE_FEED_DISABLE (1<<14) -#define SPRITE_INT_GAMMA_ENABLE (1<<13) -#define SPRITE_TILED (1<<10) -#define SPRITE_DEST_KEY (1<<2) -#define _SPRA_LINOFF 0x70284 -#define _SPRA_STRIDE 0x70288 -#define _SPRA_POS 0x7028c -#define _SPRA_SIZE 0x70290 -#define _SPRA_KEYVAL 0x70294 -#define _SPRA_KEYMSK 0x70298 -#define _SPRA_SURF 0x7029c -#define _SPRA_KEYMAX 0x702a0 -#define _SPRA_TILEOFF 0x702a4 -#define _SPRA_OFFSET 0x702a4 -#define _SPRA_SURFLIVE 0x702ac -#define _SPRA_SCALE 0x70304 -#define SPRITE_SCALE_ENABLE (1<<31) -#define SPRITE_FILTER_MASK (3<<29) -#define SPRITE_FILTER_MEDIUM (0<<29) -#define SPRITE_FILTER_ENHANCING (1<<29) -#define SPRITE_FILTER_SOFTENING (2<<29) -#define SPRITE_VERTICAL_OFFSET_HALF (1<<28) /* must be enabled below */ -#define SPRITE_VERTICAL_OFFSET_ENABLE (1<<27) -#define _SPRA_GAMC 0x70400 - -#define _SPRB_CTL 0x71280 -#define _SPRB_LINOFF 0x71284 -#define _SPRB_STRIDE 0x71288 -#define _SPRB_POS 0x7128c -#define _SPRB_SIZE 0x71290 -#define _SPRB_KEYVAL 0x71294 -#define _SPRB_KEYMSK 0x71298 -#define _SPRB_SURF 0x7129c -#define _SPRB_KEYMAX 0x712a0 -#define _SPRB_TILEOFF 0x712a4 -#define _SPRB_OFFSET 0x712a4 -#define _SPRB_SURFLIVE 0x712ac -#define _SPRB_SCALE 0x71304 -#define _SPRB_GAMC 0x71400 - -#define SPRCTL(pipe) _PIPE(pipe, _SPRA_CTL, _SPRB_CTL) -#define SPRLINOFF(pipe) _PIPE(pipe, _SPRA_LINOFF, _SPRB_LINOFF) -#define SPRSTRIDE(pipe) _PIPE(pipe, _SPRA_STRIDE, _SPRB_STRIDE) -#define SPRPOS(pipe) _PIPE(pipe, _SPRA_POS, _SPRB_POS) -#define SPRSIZE(pipe) _PIPE(pipe, _SPRA_SIZE, _SPRB_SIZE) -#define SPRKEYVAL(pipe) _PIPE(pipe, _SPRA_KEYVAL, _SPRB_KEYVAL) -#define SPRKEYMSK(pipe) _PIPE(pipe, _SPRA_KEYMSK, _SPRB_KEYMSK) -#define SPRSURF(pipe) _PIPE(pipe, _SPRA_SURF, _SPRB_SURF) -#define SPRKEYMAX(pipe) _PIPE(pipe, _SPRA_KEYMAX, _SPRB_KEYMAX) -#define SPRTILEOFF(pipe) _PIPE(pipe, _SPRA_TILEOFF, _SPRB_TILEOFF) -#define SPROFFSET(pipe) _PIPE(pipe, _SPRA_OFFSET, _SPRB_OFFSET) -#define SPRSCALE(pipe) _PIPE(pipe, _SPRA_SCALE, _SPRB_SCALE) -#define SPRGAMC(pipe) _PIPE(pipe, _SPRA_GAMC, _SPRB_GAMC) -#define SPRSURFLIVE(pipe) _PIPE(pipe, _SPRA_SURFLIVE, _SPRB_SURFLIVE) - -#define _SPACNTR (VLV_DISPLAY_BASE + 0x72180) -#define SP_ENABLE (1<<31) -#define SP_GEAMMA_ENABLE (1<<30) -#define SP_PIXFORMAT_MASK (0xf<<26) -#define SP_FORMAT_YUV422 (0<<26) -#define SP_FORMAT_BGR565 (5<<26) -#define SP_FORMAT_BGRX8888 (6<<26) -#define SP_FORMAT_BGRA8888 (7<<26) -#define SP_FORMAT_RGBX1010102 (8<<26) -#define SP_FORMAT_RGBA1010102 (9<<26) -#define SP_FORMAT_RGBX8888 (0xe<<26) -#define SP_FORMAT_RGBA8888 (0xf<<26) -#define SP_SOURCE_KEY (1<<22) -#define SP_YUV_BYTE_ORDER_MASK (3<<16) -#define SP_YUV_ORDER_YUYV (0<<16) -#define SP_YUV_ORDER_UYVY (1<<16) -#define SP_YUV_ORDER_YVYU (2<<16) -#define SP_YUV_ORDER_VYUY (3<<16) -#define SP_TILED (1<<10) -#define _SPALINOFF (VLV_DISPLAY_BASE + 0x72184) -#define _SPASTRIDE (VLV_DISPLAY_BASE + 0x72188) -#define _SPAPOS (VLV_DISPLAY_BASE + 0x7218c) -#define _SPASIZE (VLV_DISPLAY_BASE + 0x72190) -#define _SPAKEYMINVAL (VLV_DISPLAY_BASE + 0x72194) -#define _SPAKEYMSK (VLV_DISPLAY_BASE + 0x72198) -#define _SPASURF (VLV_DISPLAY_BASE + 0x7219c) -#define _SPAKEYMAXVAL (VLV_DISPLAY_BASE + 0x721a0) -#define _SPATILEOFF (VLV_DISPLAY_BASE + 0x721a4) -#define _SPACONSTALPHA (VLV_DISPLAY_BASE + 0x721a8) -#define _SPAGAMC (VLV_DISPLAY_BASE + 0x721f4) - -#define _SPBCNTR (VLV_DISPLAY_BASE + 0x72280) -#define _SPBLINOFF (VLV_DISPLAY_BASE + 0x72284) -#define _SPBSTRIDE (VLV_DISPLAY_BASE + 0x72288) -#define _SPBPOS (VLV_DISPLAY_BASE + 0x7228c) -#define _SPBSIZE (VLV_DISPLAY_BASE + 0x72290) -#define _SPBKEYMINVAL (VLV_DISPLAY_BASE + 0x72294) -#define _SPBKEYMSK (VLV_DISPLAY_BASE + 0x72298) -#define _SPBSURF (VLV_DISPLAY_BASE + 0x7229c) -#define _SPBKEYMAXVAL (VLV_DISPLAY_BASE + 0x722a0) -#define _SPBTILEOFF (VLV_DISPLAY_BASE + 0x722a4) -#define _SPBCONSTALPHA (VLV_DISPLAY_BASE + 0x722a8) -#define _SPBGAMC (VLV_DISPLAY_BASE + 0x722f4) - -#define SPCNTR(pipe, plane) _PIPE(pipe * 2 + plane, _SPACNTR, _SPBCNTR) -#define SPLINOFF(pipe, plane) _PIPE(pipe * 2 + plane, _SPALINOFF, _SPBLINOFF) -#define SPSTRIDE(pipe, plane) _PIPE(pipe * 2 + plane, _SPASTRIDE, _SPBSTRIDE) -#define SPPOS(pipe, plane) _PIPE(pipe * 2 + plane, _SPAPOS, _SPBPOS) -#define SPSIZE(pipe, plane) _PIPE(pipe * 2 + plane, _SPASIZE, _SPBSIZE) -#define SPKEYMINVAL(pipe, plane) _PIPE(pipe * 2 + plane, _SPAKEYMINVAL, _SPBKEYMINVAL) -#define SPKEYMSK(pipe, plane) _PIPE(pipe * 2 + plane, _SPAKEYMSK, _SPBKEYMSK) -#define SPSURF(pipe, plane) _PIPE(pipe * 2 + plane, _SPASURF, _SPBSURF) -#define SPKEYMAXVAL(pipe, plane) _PIPE(pipe * 2 + plane, _SPAKEYMAXVAL, _SPBKEYMAXVAL) -#define SPTILEOFF(pipe, plane) _PIPE(pipe * 2 + plane, _SPATILEOFF, _SPBTILEOFF) -#define SPCONSTALPHA(pipe, plane) _PIPE(pipe * 2 + plane, _SPACONSTALPHA, _SPBCONSTALPHA) -#define SPGAMC(pipe, plane) _PIPE(pipe * 2 + plane, _SPAGAMC, _SPBGAMC) - -/* VBIOS regs */ -#define VGACNTRL 0x71400 -# define VGA_DISP_DISABLE (1 << 31) -# define VGA_2X_MODE (1 << 30) -# define VGA_PIPE_B_SELECT (1 << 29) - -#define VLV_VGACNTRL (VLV_DISPLAY_BASE + 0x71400) - -/* Ironlake */ - -#define CPU_VGACNTRL 0x41000 - -#define DIGITAL_PORT_HOTPLUG_CNTRL 0x44030 -#define DIGITAL_PORTA_HOTPLUG_ENABLE (1 << 4) -#define DIGITAL_PORTA_SHORT_PULSE_2MS (0 << 2) -#define DIGITAL_PORTA_SHORT_PULSE_4_5MS (1 << 2) -#define DIGITAL_PORTA_SHORT_PULSE_6MS (2 << 2) -#define DIGITAL_PORTA_SHORT_PULSE_100MS (3 << 2) -#define DIGITAL_PORTA_NO_DETECT (0 << 0) -#define DIGITAL_PORTA_LONG_PULSE_DETECT_MASK (1 << 1) -#define DIGITAL_PORTA_SHORT_PULSE_DETECT_MASK (1 << 0) - -/* refresh rate hardware control */ -#define RR_HW_CTL 0x45300 -#define RR_HW_LOW_POWER_FRAMES_MASK 0xff -#define RR_HW_HIGH_POWER_FRAMES_MASK 0xff00 - -#define FDI_PLL_BIOS_0 0x46000 -#define FDI_PLL_FB_CLOCK_MASK 0xff -#define FDI_PLL_BIOS_1 0x46004 -#define FDI_PLL_BIOS_2 0x46008 -#define DISPLAY_PORT_PLL_BIOS_0 0x4600c -#define DISPLAY_PORT_PLL_BIOS_1 0x46010 -#define DISPLAY_PORT_PLL_BIOS_2 0x46014 - -#define PCH_3DCGDIS0 0x46020 + * GEN9 clock gating regs + */ +#define GEN9_CLKGATE_DIS_0 _MMIO(0x46530) +#define DARBF_GATING_DIS REG_BIT(27) +#define MTL_PIPEDMC_GATING_DIS(pipe) REG_BIT(15 - (pipe)) +#define PWM2_GATING_DIS REG_BIT(14) +#define PWM1_GATING_DIS REG_BIT(13) + +#define GEN9_CLKGATE_DIS_3 _MMIO(0x46538) +#define TGL_VRH_GATING_DIS REG_BIT(31) +#define DPT_GATING_DIS REG_BIT(22) + +#define VLV_DPFLIPSTAT _MMIO(VLV_DISPLAY_BASE + 0x70028) +#define PIPEB_LINE_COMPARE_INT_EN REG_BIT(29) +#define PIPEB_HLINE_INT_EN REG_BIT(28) +#define PIPEB_VBLANK_INT_EN REG_BIT(27) +#define SPRITED_FLIP_DONE_INT_EN REG_BIT(26) +#define SPRITEC_FLIP_DONE_INT_EN REG_BIT(25) +#define PLANEB_FLIP_DONE_INT_EN REG_BIT(24) +#define PIPE_PSR_INT_EN REG_BIT(22) +#define PIPEA_LINE_COMPARE_INT_EN REG_BIT(21) +#define PIPEA_HLINE_INT_EN REG_BIT(20) +#define PIPEA_VBLANK_INT_EN REG_BIT(19) +#define SPRITEB_FLIP_DONE_INT_EN REG_BIT(18) +#define SPRITEA_FLIP_DONE_INT_EN REG_BIT(17) +#define PLANEA_FLIPDONE_INT_EN REG_BIT(16) +#define PIPEC_LINE_COMPARE_INT_EN REG_BIT(13) +#define PIPEC_HLINE_INT_EN REG_BIT(12) +#define PIPEC_VBLANK_INT_EN REG_BIT(11) +#define SPRITEF_FLIPDONE_INT_EN REG_BIT(10) +#define SPRITEE_FLIPDONE_INT_EN REG_BIT(9) +#define PLANEC_FLIPDONE_INT_EN REG_BIT(8) + +#define PCH_3DCGDIS0 _MMIO(0x46020) # define MARIUNIT_CLOCK_GATE_DISABLE (1 << 18) # define SVSMUNIT_CLOCK_GATE_DISABLE (1 << 1) -#define PCH_3DCGDIS1 0x46024 +#define PCH_3DCGDIS1 _MMIO(0x46024) # define VFMUNIT_CLOCK_GATE_DISABLE (1 << 11) -#define FDI_PLL_FREQ_CTL 0x46030 -#define FDI_PLL_FREQ_CHANGE_REQUEST (1<<24) -#define FDI_PLL_FREQ_LOCK_LIMIT_MASK 0xfff00 -#define FDI_PLL_FREQ_DISABLE_COUNT_LIMIT_MASK 0xff - - -#define _PIPEA_DATA_M1 (dev_priv->info->display_mmio_offset + 0x60030) -#define PIPE_DATA_M1_OFFSET 0 -#define _PIPEA_DATA_N1 (dev_priv->info->display_mmio_offset + 0x60034) -#define PIPE_DATA_N1_OFFSET 0 - -#define _PIPEA_DATA_M2 (dev_priv->info->display_mmio_offset + 0x60038) -#define PIPE_DATA_M2_OFFSET 0 -#define _PIPEA_DATA_N2 (dev_priv->info->display_mmio_offset + 0x6003c) -#define PIPE_DATA_N2_OFFSET 0 - -#define _PIPEA_LINK_M1 (dev_priv->info->display_mmio_offset + 0x60040) -#define PIPE_LINK_M1_OFFSET 0 -#define _PIPEA_LINK_N1 (dev_priv->info->display_mmio_offset + 0x60044) -#define PIPE_LINK_N1_OFFSET 0 - -#define _PIPEA_LINK_M2 (dev_priv->info->display_mmio_offset + 0x60048) -#define PIPE_LINK_M2_OFFSET 0 -#define _PIPEA_LINK_N2 (dev_priv->info->display_mmio_offset + 0x6004c) -#define PIPE_LINK_N2_OFFSET 0 - -/* PIPEB timing regs are same start from 0x61000 */ - -#define _PIPEB_DATA_M1 (dev_priv->info->display_mmio_offset + 0x61030) -#define _PIPEB_DATA_N1 (dev_priv->info->display_mmio_offset + 0x61034) - -#define _PIPEB_DATA_M2 (dev_priv->info->display_mmio_offset + 0x61038) -#define _PIPEB_DATA_N2 (dev_priv->info->display_mmio_offset + 0x6103c) - -#define _PIPEB_LINK_M1 (dev_priv->info->display_mmio_offset + 0x61040) -#define _PIPEB_LINK_N1 (dev_priv->info->display_mmio_offset + 0x61044) - -#define _PIPEB_LINK_M2 (dev_priv->info->display_mmio_offset + 0x61048) -#define _PIPEB_LINK_N2 (dev_priv->info->display_mmio_offset + 0x6104c) - -#define PIPE_DATA_M1(tran) _TRANSCODER(tran, _PIPEA_DATA_M1, _PIPEB_DATA_M1) -#define PIPE_DATA_N1(tran) _TRANSCODER(tran, _PIPEA_DATA_N1, _PIPEB_DATA_N1) -#define PIPE_DATA_M2(tran) _TRANSCODER(tran, _PIPEA_DATA_M2, _PIPEB_DATA_M2) -#define PIPE_DATA_N2(tran) _TRANSCODER(tran, _PIPEA_DATA_N2, _PIPEB_DATA_N2) -#define PIPE_LINK_M1(tran) _TRANSCODER(tran, _PIPEA_LINK_M1, _PIPEB_LINK_M1) -#define PIPE_LINK_N1(tran) _TRANSCODER(tran, _PIPEA_LINK_N1, _PIPEB_LINK_N1) -#define PIPE_LINK_M2(tran) _TRANSCODER(tran, _PIPEA_LINK_M2, _PIPEB_LINK_M2) -#define PIPE_LINK_N2(tran) _TRANSCODER(tran, _PIPEA_LINK_N2, _PIPEB_LINK_N2) - -/* CPU panel fitter */ -/* IVB+ has 3 fitters, 0 is 7x5 capable, the other two only 3x3 */ -#define _PFA_CTL_1 0x68080 -#define _PFB_CTL_1 0x68880 -#define PF_ENABLE (1<<31) -#define PF_PIPE_SEL_MASK_IVB (3<<29) -#define PF_PIPE_SEL_IVB(pipe) ((pipe)<<29) -#define PF_FILTER_MASK (3<<23) -#define PF_FILTER_PROGRAMMED (0<<23) -#define PF_FILTER_MED_3x3 (1<<23) -#define PF_FILTER_EDGE_ENHANCE (2<<23) -#define PF_FILTER_EDGE_SOFTEN (3<<23) -#define _PFA_WIN_SZ 0x68074 -#define _PFB_WIN_SZ 0x68874 -#define _PFA_WIN_POS 0x68070 -#define _PFB_WIN_POS 0x68870 -#define _PFA_VSCALE 0x68084 -#define _PFB_VSCALE 0x68884 -#define _PFA_HSCALE 0x68090 -#define _PFB_HSCALE 0x68890 - -#define PF_CTL(pipe) _PIPE(pipe, _PFA_CTL_1, _PFB_CTL_1) -#define PF_WIN_SZ(pipe) _PIPE(pipe, _PFA_WIN_SZ, _PFB_WIN_SZ) -#define PF_WIN_POS(pipe) _PIPE(pipe, _PFA_WIN_POS, _PFB_WIN_POS) -#define PF_VSCALE(pipe) _PIPE(pipe, _PFA_VSCALE, _PFB_VSCALE) -#define PF_HSCALE(pipe) _PIPE(pipe, _PFA_HSCALE, _PFB_HSCALE) - -/* legacy palette */ -#define _LGC_PALETTE_A 0x4a000 -#define _LGC_PALETTE_B 0x4a800 -#define LGC_PALETTE(pipe) _PIPE(pipe, _LGC_PALETTE_A, _LGC_PALETTE_B) - -#define _GAMMA_MODE_A 0x4a480 -#define _GAMMA_MODE_B 0x4ac80 -#define GAMMA_MODE(pipe) _PIPE(pipe, _GAMMA_MODE_A, _GAMMA_MODE_B) -#define GAMMA_MODE_MODE_MASK (3 << 0) -#define GAMMA_MODE_MODE_8BIT (0 << 0) -#define GAMMA_MODE_MODE_10BIT (1 << 0) -#define GAMMA_MODE_MODE_12BIT (2 << 0) -#define GAMMA_MODE_MODE_SPLIT (3 << 0) +/* Display Internal Timeout Register */ +#define RM_TIMEOUT _MMIO(0x42060) +#define RM_TIMEOUT_REG_CAPTURE _MMIO(0x420E0) +#define MMIO_TIMEOUT_US(us) ((us) << 0) /* interrupts */ #define DE_MASTER_IRQ_CONTROL (1 << 31) @@ -3681,6 +810,7 @@ #define DE_SPRITEA_FLIP_DONE (1 << 28) #define DE_PLANEB_FLIP_DONE (1 << 27) #define DE_PLANEA_FLIP_DONE (1 << 26) +#define DE_PLANE_FLIP_DONE(plane) (1 << (26 + (plane))) #define DE_PCU_EVENT (1 << 25) #define DE_GTT_FAULT (1 << 24) #define DE_POISON (1 << 23) @@ -3694,1306 +824,420 @@ #define DE_PIPEB_ODD_FIELD (1 << 13) #define DE_PIPEB_LINE_COMPARE (1 << 12) #define DE_PIPEB_VSYNC (1 << 11) +#define DE_PIPEB_CRC_DONE (1 << 10) #define DE_PIPEB_FIFO_UNDERRUN (1 << 8) #define DE_PIPEA_VBLANK (1 << 7) +#define DE_PIPE_VBLANK(pipe) (1 << (7 + 8 * (pipe))) #define DE_PIPEA_EVEN_FIELD (1 << 6) #define DE_PIPEA_ODD_FIELD (1 << 5) #define DE_PIPEA_LINE_COMPARE (1 << 4) #define DE_PIPEA_VSYNC (1 << 3) +#define DE_PIPEA_CRC_DONE (1 << 2) +#define DE_PIPE_CRC_DONE(pipe) (1 << (2 + 8 * (pipe))) #define DE_PIPEA_FIFO_UNDERRUN (1 << 0) - -/* More Ivybridge lolz */ -#define DE_ERR_INT_IVB (1<<30) -#define DE_GSE_IVB (1<<29) -#define DE_PCH_EVENT_IVB (1<<28) -#define DE_DP_A_HOTPLUG_IVB (1<<27) -#define DE_AUX_CHANNEL_A_IVB (1<<26) -#define DE_SPRITEC_FLIP_DONE_IVB (1<<14) -#define DE_PLANEC_FLIP_DONE_IVB (1<<13) -#define DE_PIPEC_VBLANK_IVB (1<<10) -#define DE_SPRITEB_FLIP_DONE_IVB (1<<9) -#define DE_PLANEB_FLIP_DONE_IVB (1<<8) -#define DE_PIPEB_VBLANK_IVB (1<<5) -#define DE_SPRITEA_FLIP_DONE_IVB (1<<4) -#define DE_PLANEA_FLIP_DONE_IVB (1<<3) -#define DE_PIPEA_VBLANK_IVB (1<<0) - -#define VLV_MASTER_IER 0x4400c /* Gunit master IER */ -#define MASTER_INTERRUPT_ENABLE (1<<31) - -#define DEISR 0x44000 -#define DEIMR 0x44004 -#define DEIIR 0x44008 -#define DEIER 0x4400c - -#define GTISR 0x44010 -#define GTIMR 0x44014 -#define GTIIR 0x44018 -#define GTIER 0x4401c - -#define ILK_DISPLAY_CHICKEN2 0x42004 +#define DE_PIPE_FIFO_UNDERRUN(pipe) (1 << (8 * (pipe))) + +#define VLV_MASTER_IER _MMIO(0x4400c) /* Gunit master IER */ +#define MASTER_INTERRUPT_ENABLE (1 << 31) + +#define DEISR _MMIO(0x44000) +#define DEIMR _MMIO(0x44004) +#define DEIIR _MMIO(0x44008) +#define DEIER _MMIO(0x4400c) + +#define DE_IRQ_REGS I915_IRQ_REGS(DEIMR, \ + DEIER, \ + DEIIR) + +#define GTISR _MMIO(0x44010) +#define GTIMR _MMIO(0x44014) +#define GTIIR _MMIO(0x44018) +#define GTIER _MMIO(0x4401c) + +#define GT_IRQ_REGS I915_IRQ_REGS(GTIMR, \ + GTIER, \ + GTIIR) + +#define GEN8_MASTER_IRQ _MMIO(0x44200) +#define GEN8_MASTER_IRQ_CONTROL (1 << 31) +#define GEN8_PCU_IRQ (1 << 30) +#define GEN8_DE_PCH_IRQ (1 << 23) +#define GEN8_DE_MISC_IRQ (1 << 22) +#define GEN8_DE_PORT_IRQ (1 << 20) +#define GEN8_DE_PIPE_C_IRQ (1 << 18) +#define GEN8_DE_PIPE_B_IRQ (1 << 17) +#define GEN8_DE_PIPE_A_IRQ (1 << 16) +#define GEN8_DE_PIPE_IRQ(pipe) (1 << (16 + (pipe))) +#define GEN8_GT_VECS_IRQ (1 << 6) +#define GEN8_GT_GUC_IRQ (1 << 5) +#define GEN8_GT_PM_IRQ (1 << 4) +#define GEN8_GT_VCS1_IRQ (1 << 3) /* NB: VCS2 in bspec! */ +#define GEN8_GT_VCS0_IRQ (1 << 2) /* NB: VCS1 in bpsec! */ +#define GEN8_GT_BCS_IRQ (1 << 1) +#define GEN8_GT_RCS_IRQ (1 << 0) + +#define GEN8_GT_ISR(which) _MMIO(0x44300 + (0x10 * (which))) +#define GEN8_GT_IMR(which) _MMIO(0x44304 + (0x10 * (which))) +#define GEN8_GT_IIR(which) _MMIO(0x44308 + (0x10 * (which))) +#define GEN8_GT_IER(which) _MMIO(0x4430c + (0x10 * (which))) + +#define GEN8_GT_IRQ_REGS(which) I915_IRQ_REGS(GEN8_GT_IMR(which), \ + GEN8_GT_IER(which), \ + GEN8_GT_IIR(which)) + +#define GEN8_RCS_IRQ_SHIFT 0 +#define GEN8_BCS_IRQ_SHIFT 16 +#define GEN8_VCS0_IRQ_SHIFT 0 /* NB: VCS1 in bspec! */ +#define GEN8_VCS1_IRQ_SHIFT 16 /* NB: VCS2 in bpsec! */ +#define GEN8_VECS_IRQ_SHIFT 0 +#define GEN8_WD_IRQ_SHIFT 16 + +#define GEN8_PCU_ISR _MMIO(0x444e0) +#define GEN8_PCU_IMR _MMIO(0x444e4) +#define GEN8_PCU_IIR _MMIO(0x444e8) +#define GEN8_PCU_IER _MMIO(0x444ec) + +#define GEN8_PCU_IRQ_REGS I915_IRQ_REGS(GEN8_PCU_IMR, \ + GEN8_PCU_IER, \ + GEN8_PCU_IIR) + +#define GEN11_GU_MISC_ISR _MMIO(0x444f0) +#define GEN11_GU_MISC_IMR _MMIO(0x444f4) +#define GEN11_GU_MISC_IIR _MMIO(0x444f8) +#define GEN11_GU_MISC_IER _MMIO(0x444fc) +#define GEN11_GU_MISC_GSE (1 << 27) + +#define GEN11_GU_MISC_IRQ_REGS I915_IRQ_REGS(GEN11_GU_MISC_IMR, \ + GEN11_GU_MISC_IER, \ + GEN11_GU_MISC_IIR) + +#define GEN11_GFX_MSTR_IRQ _MMIO(0x190010) +#define GEN11_MASTER_IRQ (1 << 31) +#define GEN11_PCU_IRQ (1 << 30) +#define GEN11_GU_MISC_IRQ (1 << 29) +#define GEN11_DISPLAY_IRQ (1 << 16) +#define GEN11_GT_DW_IRQ(x) (1 << (x)) +#define GEN11_GT_DW1_IRQ (1 << 1) +#define GEN11_GT_DW0_IRQ (1 << 0) + +#define DG1_MSTR_TILE_INTR _MMIO(0x190008) +#define DG1_MSTR_IRQ REG_BIT(31) +#define DG1_MSTR_TILE(t) REG_BIT(t) + +#define ILK_DISPLAY_CHICKEN2 _MMIO(0x42004) /* Required on all Ironlake and Sandybridge according to the B-Spec. */ -#define ILK_ELPIN_409_SELECT (1 << 25) -#define ILK_DPARB_GATE (1<<22) -#define ILK_VSDPFD_FULL (1<<21) -#define ILK_DISPLAY_CHICKEN_FUSES 0x42014 -#define ILK_INTERNAL_GRAPHICS_DISABLE (1<<31) -#define ILK_INTERNAL_DISPLAY_DISABLE (1<<30) -#define ILK_DISPLAY_DEBUG_DISABLE (1<<29) -#define ILK_HDCP_DISABLE (1<<25) -#define ILK_eDP_A_DISABLE (1<<24) -#define ILK_DESKTOP (1<<23) - -#define ILK_DSPCLK_GATE_D 0x42020 -#define ILK_VRHUNIT_CLOCK_GATE_DISABLE (1 << 28) -#define ILK_DPFCUNIT_CLOCK_GATE_DISABLE (1 << 9) -#define ILK_DPFCRUNIT_CLOCK_GATE_DISABLE (1 << 8) -#define ILK_DPFDUNIT_CLOCK_GATE_ENABLE (1 << 7) -#define ILK_DPARBUNIT_CLOCK_GATE_ENABLE (1 << 5) - -#define IVB_CHICKEN3 0x4200c -# define CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE (1 << 5) -# define CHICKEN3_DGMG_DONE_FIX_DISABLE (1 << 2) - -#define CHICKEN_PAR1_1 0x42080 -#define FORCE_ARB_IDLE_PLANES (1 << 14) - -#define DISP_ARB_CTL 0x45000 -#define DISP_TILE_SURFACE_SWIZZLING (1<<13) -#define DISP_FBC_WM_DIS (1<<15) -#define GEN7_MSG_CTL 0x45010 -#define WAIT_FOR_PCH_RESET_ACK (1<<1) -#define WAIT_FOR_PCH_FLR_ACK (1<<0) - -/* GEN7 chicken */ -#define GEN7_COMMON_SLICE_CHICKEN1 0x7010 -# define GEN7_CSC1_RHWO_OPT_DISABLE_IN_RCC ((1<<10) | (1<<26)) - -#define GEN7_L3CNTLREG1 0xB01C -#define GEN7_WA_FOR_GEN7_L3_CONTROL 0x3C4FFF8C -#define GEN7_L3AGDIS (1<<19) - -#define GEN7_L3_CHICKEN_MODE_REGISTER 0xB030 -#define GEN7_WA_L3_CHICKEN_MODE 0x20000000 - -#define GEN7_L3SQCREG4 0xb034 -#define L3SQ_URB_READ_CAM_MATCH_DISABLE (1<<27) - -/* WaCatErrorRejectionIssue */ -#define GEN7_SQ_CHICKEN_MBCUNIT_CONFIG 0x9030 -#define GEN7_SQ_CHICKEN_MBCUNIT_SQINTMOB (1<<11) - -#define HSW_FUSE_STRAP 0x42014 -#define HSW_CDCLK_LIMIT (1 << 24) +#define ILK_ELPIN_409_SELECT REG_BIT(25) +#define ILK_DPARB_GATE REG_BIT(22) +#define ILK_VSDPFD_FULL REG_BIT(21) + +#define ILK_DSPCLK_GATE_D _MMIO(0x42020) +#define ILK_VRHUNIT_CLOCK_GATE_DISABLE REG_BIT(28) +#define ILK_DPFCUNIT_CLOCK_GATE_DISABLE REG_BIT(9) +#define ILK_DPFCRUNIT_CLOCK_GATE_DISABLE REG_BIT(8) +#define ILK_DPFDUNIT_CLOCK_GATE_ENABLE REG_BIT(7) +#define ILK_DPARBUNIT_CLOCK_GATE_ENABLE REG_BIT(5) + +#define IVB_CHICKEN3 _MMIO(0x4200c) +#define CHICKEN3_DGMG_REQ_OUT_FIX_DISABLE REG_BIT(5) +#define CHICKEN3_DGMG_DONE_FIX_DISABLE REG_BIT(2) + +#define CHICKEN_PAR1_1 _MMIO(0x42080) +#define IGNORE_KVMR_PIPE_A REG_BIT(23) +#define KBL_ARB_FILL_SPARE_22 REG_BIT(22) +#define DIS_RAM_BYPASS_PSR2_MAN_TRACK REG_BIT(16) +#define SKL_DE_COMPRESSED_HASH_MODE REG_BIT(15) +#define HSW_MASK_VBL_TO_PIPE_IN_SRD REG_BIT(15) /* hsw/bdw */ +#define FORCE_ARB_IDLE_PLANES REG_BIT(14) +#define SKL_EDP_PSR_FIX_RDWRAP REG_BIT(3) +#define IGNORE_PSR2_HW_TRACKING REG_BIT(1) + +#define CHICKEN_PAR2_1 _MMIO(0x42090) +#define KVM_CONFIG_CHANGE_NOTIFICATION_SELECT REG_BIT(14) + +#define _CHICKEN_PIPESL_1_A 0x420b0 +#define _CHICKEN_PIPESL_1_B 0x420b4 +#define CHICKEN_PIPESL_1(pipe) _MMIO_PIPE(pipe, _CHICKEN_PIPESL_1_A, _CHICKEN_PIPESL_1_B) +#define HSW_PRI_STRETCH_MAX_MASK REG_GENMASK(28, 27) +#define HSW_PRI_STRETCH_MAX_X8 REG_FIELD_PREP(HSW_PRI_STRETCH_MAX_MASK, 0) +#define HSW_PRI_STRETCH_MAX_X4 REG_FIELD_PREP(HSW_PRI_STRETCH_MAX_MASK, 1) +#define HSW_PRI_STRETCH_MAX_X2 REG_FIELD_PREP(HSW_PRI_STRETCH_MAX_MASK, 2) +#define HSW_PRI_STRETCH_MAX_X1 REG_FIELD_PREP(HSW_PRI_STRETCH_MAX_MASK, 3) +#define HSW_SPR_STRETCH_MAX_MASK REG_GENMASK(26, 25) +#define HSW_SPR_STRETCH_MAX_X8 REG_FIELD_PREP(HSW_SPR_STRETCH_MAX_MASK, 0) +#define HSW_SPR_STRETCH_MAX_X4 REG_FIELD_PREP(HSW_SPR_STRETCH_MAX_MASK, 1) +#define HSW_SPR_STRETCH_MAX_X2 REG_FIELD_PREP(HSW_SPR_STRETCH_MAX_MASK, 2) +#define HSW_SPR_STRETCH_MAX_X1 REG_FIELD_PREP(HSW_SPR_STRETCH_MAX_MASK, 3) +#define HSW_FBCQ_DIS REG_BIT(22) +#define HSW_UNMASK_VBL_TO_REGS_IN_SRD REG_BIT(15) /* hsw */ +#define SKL_PSR_MASK_PLANE_FLIP REG_BIT(11) /* skl+ */ +#define SKL_PLANE1_STRETCH_MAX_MASK REG_GENMASK(1, 0) +#define SKL_PLANE1_STRETCH_MAX_X8 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 0) +#define SKL_PLANE1_STRETCH_MAX_X4 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 1) +#define SKL_PLANE1_STRETCH_MAX_X2 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 2) +#define SKL_PLANE1_STRETCH_MAX_X1 REG_FIELD_PREP(SKL_PLANE1_STRETCH_MAX_MASK, 3) +#define BDW_UNMASK_VBL_TO_REGS_IN_SRD REG_BIT(0) /* bdw */ + +#define DISP_ARB_CTL _MMIO(0x45000) +#define DISP_FBC_MEMORY_WAKE REG_BIT(31) +#define DISP_TILE_SURFACE_SWIZZLING REG_BIT(13) +#define DISP_FBC_WM_DIS REG_BIT(15) + +#define GEN8_CHICKEN_DCPR_1 _MMIO(0x46430) +#define _LATENCY_REPORTING_REMOVED_PIPE_D REG_BIT(31) +#define SKL_SELECT_ALTERNATE_DC_EXIT REG_BIT(30) +#define _LATENCY_REPORTING_REMOVED_PIPE_C REG_BIT(25) +#define _LATENCY_REPORTING_REMOVED_PIPE_B REG_BIT(24) +#define _LATENCY_REPORTING_REMOVED_PIPE_A REG_BIT(23) +#define LATENCY_REPORTING_REMOVED(pipe) _PICK((pipe), \ + _LATENCY_REPORTING_REMOVED_PIPE_A, \ + _LATENCY_REPORTING_REMOVED_PIPE_B, \ + _LATENCY_REPORTING_REMOVED_PIPE_C, \ + _LATENCY_REPORTING_REMOVED_PIPE_D) +#define ICL_DELAY_PMRSP REG_BIT(22) +#define DISABLE_FLR_SRC REG_BIT(15) +#define MASK_WAKEMEM REG_BIT(13) +#define DDI_CLOCK_REG_ACCESS REG_BIT(7) + +#define GMD_ID_DISPLAY _MMIO(0x510a0) +#define GMD_ID_ARCH_MASK REG_GENMASK(31, 22) +#define GMD_ID_RELEASE_MASK REG_GENMASK(21, 14) +#define GMD_ID_STEP REG_GENMASK(5, 0) /* PCH */ -/* south display engine interrupt: IBX */ -#define SDE_AUDIO_POWER_D (1 << 27) -#define SDE_AUDIO_POWER_C (1 << 26) -#define SDE_AUDIO_POWER_B (1 << 25) -#define SDE_AUDIO_POWER_SHIFT (25) -#define SDE_AUDIO_POWER_MASK (7 << SDE_AUDIO_POWER_SHIFT) -#define SDE_GMBUS (1 << 24) -#define SDE_AUDIO_HDCP_TRANSB (1 << 23) -#define SDE_AUDIO_HDCP_TRANSA (1 << 22) -#define SDE_AUDIO_HDCP_MASK (3 << 22) -#define SDE_AUDIO_TRANSB (1 << 21) -#define SDE_AUDIO_TRANSA (1 << 20) -#define SDE_AUDIO_TRANS_MASK (3 << 20) -#define SDE_POISON (1 << 19) -/* 18 reserved */ -#define SDE_FDI_RXB (1 << 17) -#define SDE_FDI_RXA (1 << 16) -#define SDE_FDI_MASK (3 << 16) -#define SDE_AUXD (1 << 15) -#define SDE_AUXC (1 << 14) -#define SDE_AUXB (1 << 13) -#define SDE_AUX_MASK (7 << 13) -/* 12 reserved */ -#define SDE_CRT_HOTPLUG (1 << 11) -#define SDE_PORTD_HOTPLUG (1 << 10) -#define SDE_PORTC_HOTPLUG (1 << 9) -#define SDE_PORTB_HOTPLUG (1 << 8) -#define SDE_SDVOB_HOTPLUG (1 << 6) -#define SDE_HOTPLUG_MASK (SDE_CRT_HOTPLUG | \ - SDE_SDVOB_HOTPLUG | \ - SDE_PORTB_HOTPLUG | \ - SDE_PORTC_HOTPLUG | \ - SDE_PORTD_HOTPLUG) -#define SDE_TRANSB_CRC_DONE (1 << 5) -#define SDE_TRANSB_CRC_ERR (1 << 4) -#define SDE_TRANSB_FIFO_UNDER (1 << 3) -#define SDE_TRANSA_CRC_DONE (1 << 2) -#define SDE_TRANSA_CRC_ERR (1 << 1) -#define SDE_TRANSA_FIFO_UNDER (1 << 0) -#define SDE_TRANS_MASK (0x3f) - -/* south display engine interrupt: CPT/PPT */ -#define SDE_AUDIO_POWER_D_CPT (1 << 31) -#define SDE_AUDIO_POWER_C_CPT (1 << 30) -#define SDE_AUDIO_POWER_B_CPT (1 << 29) -#define SDE_AUDIO_POWER_SHIFT_CPT 29 -#define SDE_AUDIO_POWER_MASK_CPT (7 << 29) -#define SDE_AUXD_CPT (1 << 27) -#define SDE_AUXC_CPT (1 << 26) -#define SDE_AUXB_CPT (1 << 25) -#define SDE_AUX_MASK_CPT (7 << 25) -#define SDE_PORTD_HOTPLUG_CPT (1 << 23) -#define SDE_PORTC_HOTPLUG_CPT (1 << 22) -#define SDE_PORTB_HOTPLUG_CPT (1 << 21) -#define SDE_CRT_HOTPLUG_CPT (1 << 19) -#define SDE_SDVOB_HOTPLUG_CPT (1 << 18) -#define SDE_HOTPLUG_MASK_CPT (SDE_CRT_HOTPLUG_CPT | \ - SDE_SDVOB_HOTPLUG_CPT | \ - SDE_PORTD_HOTPLUG_CPT | \ - SDE_PORTC_HOTPLUG_CPT | \ - SDE_PORTB_HOTPLUG_CPT) -#define SDE_GMBUS_CPT (1 << 17) -#define SDE_ERROR_CPT (1 << 16) -#define SDE_AUDIO_CP_REQ_C_CPT (1 << 10) -#define SDE_AUDIO_CP_CHG_C_CPT (1 << 9) -#define SDE_FDI_RXC_CPT (1 << 8) -#define SDE_AUDIO_CP_REQ_B_CPT (1 << 6) -#define SDE_AUDIO_CP_CHG_B_CPT (1 << 5) -#define SDE_FDI_RXB_CPT (1 << 4) -#define SDE_AUDIO_CP_REQ_A_CPT (1 << 2) -#define SDE_AUDIO_CP_CHG_A_CPT (1 << 1) -#define SDE_FDI_RXA_CPT (1 << 0) -#define SDE_AUDIO_CP_REQ_CPT (SDE_AUDIO_CP_REQ_C_CPT | \ - SDE_AUDIO_CP_REQ_B_CPT | \ - SDE_AUDIO_CP_REQ_A_CPT) -#define SDE_AUDIO_CP_CHG_CPT (SDE_AUDIO_CP_CHG_C_CPT | \ - SDE_AUDIO_CP_CHG_B_CPT | \ - SDE_AUDIO_CP_CHG_A_CPT) -#define SDE_FDI_MASK_CPT (SDE_FDI_RXC_CPT | \ - SDE_FDI_RXB_CPT | \ - SDE_FDI_RXA_CPT) - -#define SDEISR 0xc4000 -#define SDEIMR 0xc4004 -#define SDEIIR 0xc4008 -#define SDEIER 0xc400c - -#define SERR_INT 0xc4040 -#define SERR_INT_POISON (1<<31) -#define SERR_INT_TRANS_C_FIFO_UNDERRUN (1<<6) -#define SERR_INT_TRANS_B_FIFO_UNDERRUN (1<<3) -#define SERR_INT_TRANS_A_FIFO_UNDERRUN (1<<0) - -/* digital port hotplug */ -#define PCH_PORT_HOTPLUG 0xc4030 /* SHOTPLUG_CTL */ -#define PORTD_HOTPLUG_ENABLE (1 << 20) -#define PORTD_PULSE_DURATION_2ms (0) -#define PORTD_PULSE_DURATION_4_5ms (1 << 18) -#define PORTD_PULSE_DURATION_6ms (2 << 18) -#define PORTD_PULSE_DURATION_100ms (3 << 18) -#define PORTD_PULSE_DURATION_MASK (3 << 18) -#define PORTD_HOTPLUG_STATUS_MASK (0x3 << 16) -#define PORTD_HOTPLUG_NO_DETECT (0 << 16) -#define PORTD_HOTPLUG_SHORT_DETECT (1 << 16) -#define PORTD_HOTPLUG_LONG_DETECT (2 << 16) -#define PORTC_HOTPLUG_ENABLE (1 << 12) -#define PORTC_PULSE_DURATION_2ms (0) -#define PORTC_PULSE_DURATION_4_5ms (1 << 10) -#define PORTC_PULSE_DURATION_6ms (2 << 10) -#define PORTC_PULSE_DURATION_100ms (3 << 10) -#define PORTC_PULSE_DURATION_MASK (3 << 10) -#define PORTC_HOTPLUG_STATUS_MASK (0x3 << 8) -#define PORTC_HOTPLUG_NO_DETECT (0 << 8) -#define PORTC_HOTPLUG_SHORT_DETECT (1 << 8) -#define PORTC_HOTPLUG_LONG_DETECT (2 << 8) -#define PORTB_HOTPLUG_ENABLE (1 << 4) -#define PORTB_PULSE_DURATION_2ms (0) -#define PORTB_PULSE_DURATION_4_5ms (1 << 2) -#define PORTB_PULSE_DURATION_6ms (2 << 2) -#define PORTB_PULSE_DURATION_100ms (3 << 2) -#define PORTB_PULSE_DURATION_MASK (3 << 2) -#define PORTB_HOTPLUG_STATUS_MASK (0x3 << 0) -#define PORTB_HOTPLUG_NO_DETECT (0 << 0) -#define PORTB_HOTPLUG_SHORT_DETECT (1 << 0) -#define PORTB_HOTPLUG_LONG_DETECT (2 << 0) - -#define PCH_GPIOA 0xc5010 -#define PCH_GPIOB 0xc5014 -#define PCH_GPIOC 0xc5018 -#define PCH_GPIOD 0xc501c -#define PCH_GPIOE 0xc5020 -#define PCH_GPIOF 0xc5024 - -#define PCH_GMBUS0 0xc5100 -#define PCH_GMBUS1 0xc5104 -#define PCH_GMBUS2 0xc5108 -#define PCH_GMBUS3 0xc510c -#define PCH_GMBUS4 0xc5110 -#define PCH_GMBUS5 0xc5120 - -#define _PCH_DPLL_A 0xc6014 -#define _PCH_DPLL_B 0xc6018 -#define PCH_DPLL(pll) (pll == 0 ? _PCH_DPLL_A : _PCH_DPLL_B) - -#define _PCH_FPA0 0xc6040 -#define FP_CB_TUNE (0x3<<22) -#define _PCH_FPA1 0xc6044 -#define _PCH_FPB0 0xc6048 -#define _PCH_FPB1 0xc604c -#define PCH_FP0(pll) (pll == 0 ? _PCH_FPA0 : _PCH_FPB0) -#define PCH_FP1(pll) (pll == 0 ? _PCH_FPA1 : _PCH_FPB1) - -#define PCH_DPLL_TEST 0xc606c - -#define PCH_DREF_CONTROL 0xC6200 -#define DREF_CONTROL_MASK 0x7fc3 -#define DREF_CPU_SOURCE_OUTPUT_DISABLE (0<<13) -#define DREF_CPU_SOURCE_OUTPUT_DOWNSPREAD (2<<13) -#define DREF_CPU_SOURCE_OUTPUT_NONSPREAD (3<<13) -#define DREF_CPU_SOURCE_OUTPUT_MASK (3<<13) -#define DREF_SSC_SOURCE_DISABLE (0<<11) -#define DREF_SSC_SOURCE_ENABLE (2<<11) -#define DREF_SSC_SOURCE_MASK (3<<11) -#define DREF_NONSPREAD_SOURCE_DISABLE (0<<9) -#define DREF_NONSPREAD_CK505_ENABLE (1<<9) -#define DREF_NONSPREAD_SOURCE_ENABLE (2<<9) -#define DREF_NONSPREAD_SOURCE_MASK (3<<9) -#define DREF_SUPERSPREAD_SOURCE_DISABLE (0<<7) -#define DREF_SUPERSPREAD_SOURCE_ENABLE (2<<7) -#define DREF_SUPERSPREAD_SOURCE_MASK (3<<7) -#define DREF_SSC4_DOWNSPREAD (0<<6) -#define DREF_SSC4_CENTERSPREAD (1<<6) -#define DREF_SSC1_DISABLE (0<<1) -#define DREF_SSC1_ENABLE (1<<1) -#define DREF_SSC4_DISABLE (0) -#define DREF_SSC4_ENABLE (1) - -#define PCH_RAWCLK_FREQ 0xc6204 -#define FDL_TP1_TIMER_SHIFT 12 -#define FDL_TP1_TIMER_MASK (3<<12) -#define FDL_TP2_TIMER_SHIFT 10 -#define FDL_TP2_TIMER_MASK (3<<10) -#define RAWCLK_FREQ_MASK 0x3ff - -#define PCH_DPLL_TMR_CFG 0xc6208 - -#define PCH_SSC4_PARMS 0xc6210 -#define PCH_SSC4_AUX_PARMS 0xc6214 - -#define PCH_DPLL_SEL 0xc7000 -#define TRANS_DPLLB_SEL(pipe) (1 << (pipe * 4)) -#define TRANS_DPLLA_SEL(pipe) 0 -#define TRANS_DPLL_ENABLE(pipe) (1 << (pipe * 4 + 3)) - -/* transcoder */ - -#define _PCH_TRANS_HTOTAL_A 0xe0000 -#define TRANS_HTOTAL_SHIFT 16 -#define TRANS_HACTIVE_SHIFT 0 -#define _PCH_TRANS_HBLANK_A 0xe0004 -#define TRANS_HBLANK_END_SHIFT 16 -#define TRANS_HBLANK_START_SHIFT 0 -#define _PCH_TRANS_HSYNC_A 0xe0008 -#define TRANS_HSYNC_END_SHIFT 16 -#define TRANS_HSYNC_START_SHIFT 0 -#define _PCH_TRANS_VTOTAL_A 0xe000c -#define TRANS_VTOTAL_SHIFT 16 -#define TRANS_VACTIVE_SHIFT 0 -#define _PCH_TRANS_VBLANK_A 0xe0010 -#define TRANS_VBLANK_END_SHIFT 16 -#define TRANS_VBLANK_START_SHIFT 0 -#define _PCH_TRANS_VSYNC_A 0xe0014 -#define TRANS_VSYNC_END_SHIFT 16 -#define TRANS_VSYNC_START_SHIFT 0 -#define _PCH_TRANS_VSYNCSHIFT_A 0xe0028 - -#define _PCH_TRANSA_DATA_M1 0xe0030 -#define _PCH_TRANSA_DATA_N1 0xe0034 -#define _PCH_TRANSA_DATA_M2 0xe0038 -#define _PCH_TRANSA_DATA_N2 0xe003c -#define _PCH_TRANSA_LINK_M1 0xe0040 -#define _PCH_TRANSA_LINK_N1 0xe0044 -#define _PCH_TRANSA_LINK_M2 0xe0048 -#define _PCH_TRANSA_LINK_N2 0xe004c - -/* Per-transcoder DIP controls */ +#define SDEISR _MMIO(0xc4000) +#define SDEIMR _MMIO(0xc4004) +#define SDEIIR _MMIO(0xc4008) +#define SDEIER _MMIO(0xc400c) -#define _VIDEO_DIP_CTL_A 0xe0200 -#define _VIDEO_DIP_DATA_A 0xe0208 -#define _VIDEO_DIP_GCP_A 0xe0210 - -#define _VIDEO_DIP_CTL_B 0xe1200 -#define _VIDEO_DIP_DATA_B 0xe1208 -#define _VIDEO_DIP_GCP_B 0xe1210 - -#define TVIDEO_DIP_CTL(pipe) _PIPE(pipe, _VIDEO_DIP_CTL_A, _VIDEO_DIP_CTL_B) -#define TVIDEO_DIP_DATA(pipe) _PIPE(pipe, _VIDEO_DIP_DATA_A, _VIDEO_DIP_DATA_B) -#define TVIDEO_DIP_GCP(pipe) _PIPE(pipe, _VIDEO_DIP_GCP_A, _VIDEO_DIP_GCP_B) - -#define VLV_VIDEO_DIP_CTL_A (VLV_DISPLAY_BASE + 0x60200) -#define VLV_VIDEO_DIP_DATA_A (VLV_DISPLAY_BASE + 0x60208) -#define VLV_VIDEO_DIP_GDCP_PAYLOAD_A (VLV_DISPLAY_BASE + 0x60210) - -#define VLV_VIDEO_DIP_CTL_B (VLV_DISPLAY_BASE + 0x61170) -#define VLV_VIDEO_DIP_DATA_B (VLV_DISPLAY_BASE + 0x61174) -#define VLV_VIDEO_DIP_GDCP_PAYLOAD_B (VLV_DISPLAY_BASE + 0x61178) - -#define VLV_TVIDEO_DIP_CTL(pipe) \ - _PIPE(pipe, VLV_VIDEO_DIP_CTL_A, VLV_VIDEO_DIP_CTL_B) -#define VLV_TVIDEO_DIP_DATA(pipe) \ - _PIPE(pipe, VLV_VIDEO_DIP_DATA_A, VLV_VIDEO_DIP_DATA_B) -#define VLV_TVIDEO_DIP_GCP(pipe) \ - _PIPE(pipe, VLV_VIDEO_DIP_GDCP_PAYLOAD_A, VLV_VIDEO_DIP_GDCP_PAYLOAD_B) - -/* Haswell DIP controls */ -#define HSW_VIDEO_DIP_CTL_A 0x60200 -#define HSW_VIDEO_DIP_AVI_DATA_A 0x60220 -#define HSW_VIDEO_DIP_VS_DATA_A 0x60260 -#define HSW_VIDEO_DIP_SPD_DATA_A 0x602A0 -#define HSW_VIDEO_DIP_GMP_DATA_A 0x602E0 -#define HSW_VIDEO_DIP_VSC_DATA_A 0x60320 -#define HSW_VIDEO_DIP_AVI_ECC_A 0x60240 -#define HSW_VIDEO_DIP_VS_ECC_A 0x60280 -#define HSW_VIDEO_DIP_SPD_ECC_A 0x602C0 -#define HSW_VIDEO_DIP_GMP_ECC_A 0x60300 -#define HSW_VIDEO_DIP_VSC_ECC_A 0x60344 -#define HSW_VIDEO_DIP_GCP_A 0x60210 - -#define HSW_VIDEO_DIP_CTL_B 0x61200 -#define HSW_VIDEO_DIP_AVI_DATA_B 0x61220 -#define HSW_VIDEO_DIP_VS_DATA_B 0x61260 -#define HSW_VIDEO_DIP_SPD_DATA_B 0x612A0 -#define HSW_VIDEO_DIP_GMP_DATA_B 0x612E0 -#define HSW_VIDEO_DIP_VSC_DATA_B 0x61320 -#define HSW_VIDEO_DIP_BVI_ECC_B 0x61240 -#define HSW_VIDEO_DIP_VS_ECC_B 0x61280 -#define HSW_VIDEO_DIP_SPD_ECC_B 0x612C0 -#define HSW_VIDEO_DIP_GMP_ECC_B 0x61300 -#define HSW_VIDEO_DIP_VSC_ECC_B 0x61344 -#define HSW_VIDEO_DIP_GCP_B 0x61210 - -#define HSW_TVIDEO_DIP_CTL(trans) \ - _TRANSCODER(trans, HSW_VIDEO_DIP_CTL_A, HSW_VIDEO_DIP_CTL_B) -#define HSW_TVIDEO_DIP_AVI_DATA(trans) \ - _TRANSCODER(trans, HSW_VIDEO_DIP_AVI_DATA_A, HSW_VIDEO_DIP_AVI_DATA_B) -#define HSW_TVIDEO_DIP_SPD_DATA(trans) \ - _TRANSCODER(trans, HSW_VIDEO_DIP_SPD_DATA_A, HSW_VIDEO_DIP_SPD_DATA_B) -#define HSW_TVIDEO_DIP_GCP(trans) \ - _TRANSCODER(trans, HSW_VIDEO_DIP_GCP_A, HSW_VIDEO_DIP_GCP_B) -#define HSW_TVIDEO_DIP_VSC_DATA(trans) \ - _TRANSCODER(trans, HSW_VIDEO_DIP_VSC_DATA_A, HSW_VIDEO_DIP_VSC_DATA_B) - -#define _PCH_TRANS_HTOTAL_B 0xe1000 -#define _PCH_TRANS_HBLANK_B 0xe1004 -#define _PCH_TRANS_HSYNC_B 0xe1008 -#define _PCH_TRANS_VTOTAL_B 0xe100c -#define _PCH_TRANS_VBLANK_B 0xe1010 -#define _PCH_TRANS_VSYNC_B 0xe1014 -#define _PCH_TRANS_VSYNCSHIFT_B 0xe1028 - -#define PCH_TRANS_HTOTAL(pipe) _PIPE(pipe, _PCH_TRANS_HTOTAL_A, _PCH_TRANS_HTOTAL_B) -#define PCH_TRANS_HBLANK(pipe) _PIPE(pipe, _PCH_TRANS_HBLANK_A, _PCH_TRANS_HBLANK_B) -#define PCH_TRANS_HSYNC(pipe) _PIPE(pipe, _PCH_TRANS_HSYNC_A, _PCH_TRANS_HSYNC_B) -#define PCH_TRANS_VTOTAL(pipe) _PIPE(pipe, _PCH_TRANS_VTOTAL_A, _PCH_TRANS_VTOTAL_B) -#define PCH_TRANS_VBLANK(pipe) _PIPE(pipe, _PCH_TRANS_VBLANK_A, _PCH_TRANS_VBLANK_B) -#define PCH_TRANS_VSYNC(pipe) _PIPE(pipe, _PCH_TRANS_VSYNC_A, _PCH_TRANS_VSYNC_B) -#define PCH_TRANS_VSYNCSHIFT(pipe) _PIPE(pipe, _PCH_TRANS_VSYNCSHIFT_A, \ - _PCH_TRANS_VSYNCSHIFT_B) - -#define _PCH_TRANSB_DATA_M1 0xe1030 -#define _PCH_TRANSB_DATA_N1 0xe1034 -#define _PCH_TRANSB_DATA_M2 0xe1038 -#define _PCH_TRANSB_DATA_N2 0xe103c -#define _PCH_TRANSB_LINK_M1 0xe1040 -#define _PCH_TRANSB_LINK_N1 0xe1044 -#define _PCH_TRANSB_LINK_M2 0xe1048 -#define _PCH_TRANSB_LINK_N2 0xe104c - -#define PCH_TRANS_DATA_M1(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_M1, _PCH_TRANSB_DATA_M1) -#define PCH_TRANS_DATA_N1(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_N1, _PCH_TRANSB_DATA_N1) -#define PCH_TRANS_DATA_M2(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_M2, _PCH_TRANSB_DATA_M2) -#define PCH_TRANS_DATA_N2(pipe) _PIPE(pipe, _PCH_TRANSA_DATA_N2, _PCH_TRANSB_DATA_N2) -#define PCH_TRANS_LINK_M1(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_M1, _PCH_TRANSB_LINK_M1) -#define PCH_TRANS_LINK_N1(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_N1, _PCH_TRANSB_LINK_N1) -#define PCH_TRANS_LINK_M2(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_M2, _PCH_TRANSB_LINK_M2) -#define PCH_TRANS_LINK_N2(pipe) _PIPE(pipe, _PCH_TRANSA_LINK_N2, _PCH_TRANSB_LINK_N2) - -#define _PCH_TRANSACONF 0xf0008 -#define _PCH_TRANSBCONF 0xf1008 -#define PCH_TRANSCONF(pipe) _PIPE(pipe, _PCH_TRANSACONF, _PCH_TRANSBCONF) -#define LPT_TRANSCONF _PCH_TRANSACONF /* lpt has only one transcoder */ -#define TRANS_DISABLE (0<<31) -#define TRANS_ENABLE (1<<31) -#define TRANS_STATE_MASK (1<<30) -#define TRANS_STATE_DISABLE (0<<30) -#define TRANS_STATE_ENABLE (1<<30) -#define TRANS_FSYNC_DELAY_HB1 (0<<27) -#define TRANS_FSYNC_DELAY_HB2 (1<<27) -#define TRANS_FSYNC_DELAY_HB3 (2<<27) -#define TRANS_FSYNC_DELAY_HB4 (3<<27) -#define TRANS_INTERLACE_MASK (7<<21) -#define TRANS_PROGRESSIVE (0<<21) -#define TRANS_INTERLACED (3<<21) -#define TRANS_LEGACY_INTERLACED_ILK (2<<21) -#define TRANS_8BPC (0<<5) -#define TRANS_10BPC (1<<5) -#define TRANS_6BPC (2<<5) -#define TRANS_12BPC (3<<5) +/* Icelake PPS_DATA and _ECC DIP Registers. + * These are available for transcoders B,C and eDP. + * Adding the _A so as to reuse the _MMIO_TRANS2 + * definition, with which it offsets to the right location. + */ #define _TRANSA_CHICKEN1 0xf0060 #define _TRANSB_CHICKEN1 0xf1060 -#define TRANS_CHICKEN1(pipe) _PIPE(pipe, _TRANSA_CHICKEN1, _TRANSB_CHICKEN1) -#define TRANS_CHICKEN1_DP0UNIT_GC_DISABLE (1<<4) +#define TRANS_CHICKEN1(pipe) _MMIO_PIPE(pipe, _TRANSA_CHICKEN1, _TRANSB_CHICKEN1) +#define TRANS_CHICKEN1_HDMIUNIT_GC_DISABLE REG_BIT(10) +#define TRANS_CHICKEN1_DP0UNIT_GC_DISABLE REG_BIT(4) + #define _TRANSA_CHICKEN2 0xf0064 #define _TRANSB_CHICKEN2 0xf1064 -#define TRANS_CHICKEN2(pipe) _PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2) -#define TRANS_CHICKEN2_TIMING_OVERRIDE (1<<31) -#define TRANS_CHICKEN2_FDI_POLARITY_REVERSED (1<<29) -#define TRANS_CHICKEN2_FRAME_START_DELAY_MASK (3<<27) -#define TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER (1<<26) -#define TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH (1<<25) - -#define SOUTH_CHICKEN1 0xc2000 +#define TRANS_CHICKEN2(pipe) _MMIO_PIPE(pipe, _TRANSA_CHICKEN2, _TRANSB_CHICKEN2) +#define TRANS_CHICKEN2_TIMING_OVERRIDE REG_BIT(31) +#define TRANS_CHICKEN2_FDI_POLARITY_REVERSED REG_BIT(29) +#define TRANS_CHICKEN2_FRAME_START_DELAY_MASK REG_GENMASK(28, 27) +#define TRANS_CHICKEN2_FRAME_START_DELAY(x) REG_FIELD_PREP(TRANS_CHICKEN2_FRAME_START_DELAY_MASK, (x)) /* 0-3 */ +#define TRANS_CHICKEN2_DISABLE_DEEP_COLOR_COUNTER REG_BIT(26) +#define TRANS_CHICKEN2_DISABLE_DEEP_COLOR_MODESWITCH REG_BIT(25) + +#define SOUTH_CHICKEN1 _MMIO(0xc2000) #define FDIA_PHASE_SYNC_SHIFT_OVR 19 #define FDIA_PHASE_SYNC_SHIFT_EN 18 -#define FDI_PHASE_SYNC_OVR(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_OVR - ((pipe) * 2))) -#define FDI_PHASE_SYNC_EN(pipe) (1<<(FDIA_PHASE_SYNC_SHIFT_EN - ((pipe) * 2))) +#define INVERT_DDIE_HPD REG_BIT(28) +#define INVERT_DDID_HPD_MTP REG_BIT(27) +#define INVERT_TC4_HPD REG_BIT(26) +#define INVERT_TC3_HPD REG_BIT(25) +#define INVERT_TC2_HPD REG_BIT(24) +#define INVERT_TC1_HPD REG_BIT(23) +#define INVERT_DDID_HPD (1 << 18) +#define INVERT_DDIC_HPD (1 << 17) +#define INVERT_DDIB_HPD (1 << 16) +#define INVERT_DDIA_HPD (1 << 15) +#define FDI_PHASE_SYNC_OVR(pipe) (1 << (FDIA_PHASE_SYNC_SHIFT_OVR - ((pipe) * 2))) +#define FDI_PHASE_SYNC_EN(pipe) (1 << (FDIA_PHASE_SYNC_SHIFT_EN - ((pipe) * 2))) #define FDI_BC_BIFURCATION_SELECT (1 << 12) -#define SOUTH_CHICKEN2 0xc2004 -#define FDI_MPHY_IOSFSB_RESET_STATUS (1<<13) -#define FDI_MPHY_IOSFSB_RESET_CTL (1<<12) -#define DPLS_EDP_PPS_FIX_DIS (1<<0) - -#define _FDI_RXA_CHICKEN 0xc200c -#define _FDI_RXB_CHICKEN 0xc2010 -#define FDI_RX_PHASE_SYNC_POINTER_OVR (1<<1) -#define FDI_RX_PHASE_SYNC_POINTER_EN (1<<0) -#define FDI_RX_CHICKEN(pipe) _PIPE(pipe, _FDI_RXA_CHICKEN, _FDI_RXB_CHICKEN) - -#define SOUTH_DSPCLK_GATE_D 0xc2020 -#define PCH_DPLSUNIT_CLOCK_GATE_DISABLE (1<<29) -#define PCH_LP_PARTITION_LEVEL_DISABLE (1<<12) - -/* CPU: FDI_TX */ -#define _FDI_TXA_CTL 0x60100 -#define _FDI_TXB_CTL 0x61100 -#define FDI_TX_CTL(pipe) _PIPE(pipe, _FDI_TXA_CTL, _FDI_TXB_CTL) -#define FDI_TX_DISABLE (0<<31) -#define FDI_TX_ENABLE (1<<31) -#define FDI_LINK_TRAIN_PATTERN_1 (0<<28) -#define FDI_LINK_TRAIN_PATTERN_2 (1<<28) -#define FDI_LINK_TRAIN_PATTERN_IDLE (2<<28) -#define FDI_LINK_TRAIN_NONE (3<<28) -#define FDI_LINK_TRAIN_VOLTAGE_0_4V (0<<25) -#define FDI_LINK_TRAIN_VOLTAGE_0_6V (1<<25) -#define FDI_LINK_TRAIN_VOLTAGE_0_8V (2<<25) -#define FDI_LINK_TRAIN_VOLTAGE_1_2V (3<<25) -#define FDI_LINK_TRAIN_PRE_EMPHASIS_NONE (0<<22) -#define FDI_LINK_TRAIN_PRE_EMPHASIS_1_5X (1<<22) -#define FDI_LINK_TRAIN_PRE_EMPHASIS_2X (2<<22) -#define FDI_LINK_TRAIN_PRE_EMPHASIS_3X (3<<22) -/* ILK always use 400mV 0dB for voltage swing and pre-emphasis level. - SNB has different settings. */ -/* SNB A-stepping */ -#define FDI_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22) -#define FDI_LINK_TRAIN_400MV_6DB_SNB_A (0x02<<22) -#define FDI_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22) -#define FDI_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22) -/* SNB B-stepping */ -#define FDI_LINK_TRAIN_400MV_0DB_SNB_B (0x0<<22) -#define FDI_LINK_TRAIN_400MV_6DB_SNB_B (0x3a<<22) -#define FDI_LINK_TRAIN_600MV_3_5DB_SNB_B (0x39<<22) -#define FDI_LINK_TRAIN_800MV_0DB_SNB_B (0x38<<22) -#define FDI_LINK_TRAIN_VOL_EMP_MASK (0x3f<<22) -#define FDI_DP_PORT_WIDTH_SHIFT 19 -#define FDI_DP_PORT_WIDTH_MASK (7 << FDI_DP_PORT_WIDTH_SHIFT) -#define FDI_DP_PORT_WIDTH(width) (((width) - 1) << FDI_DP_PORT_WIDTH_SHIFT) -#define FDI_TX_ENHANCE_FRAME_ENABLE (1<<18) -/* Ironlake: hardwired to 1 */ -#define FDI_TX_PLL_ENABLE (1<<14) - -/* Ivybridge has different bits for lolz */ -#define FDI_LINK_TRAIN_PATTERN_1_IVB (0<<8) -#define FDI_LINK_TRAIN_PATTERN_2_IVB (1<<8) -#define FDI_LINK_TRAIN_PATTERN_IDLE_IVB (2<<8) -#define FDI_LINK_TRAIN_NONE_IVB (3<<8) - -/* both Tx and Rx */ -#define FDI_COMPOSITE_SYNC (1<<11) -#define FDI_LINK_TRAIN_AUTO (1<<10) -#define FDI_SCRAMBLING_ENABLE (0<<7) -#define FDI_SCRAMBLING_DISABLE (1<<7) - -/* FDI_RX, FDI_X is hard-wired to Transcoder_X */ -#define _FDI_RXA_CTL 0xf000c -#define _FDI_RXB_CTL 0xf100c -#define FDI_RX_CTL(pipe) _PIPE(pipe, _FDI_RXA_CTL, _FDI_RXB_CTL) -#define FDI_RX_ENABLE (1<<31) -/* train, dp width same as FDI_TX */ -#define FDI_FS_ERRC_ENABLE (1<<27) -#define FDI_FE_ERRC_ENABLE (1<<26) -#define FDI_RX_POLARITY_REVERSED_LPT (1<<16) -#define FDI_8BPC (0<<16) -#define FDI_10BPC (1<<16) -#define FDI_6BPC (2<<16) -#define FDI_12BPC (3<<16) -#define FDI_RX_LINK_REVERSAL_OVERRIDE (1<<15) -#define FDI_DMI_LINK_REVERSE_MASK (1<<14) -#define FDI_RX_PLL_ENABLE (1<<13) -#define FDI_FS_ERR_CORRECT_ENABLE (1<<11) -#define FDI_FE_ERR_CORRECT_ENABLE (1<<10) -#define FDI_FS_ERR_REPORT_ENABLE (1<<9) -#define FDI_FE_ERR_REPORT_ENABLE (1<<8) -#define FDI_RX_ENHANCE_FRAME_ENABLE (1<<6) -#define FDI_PCDCLK (1<<4) -/* CPT */ -#define FDI_AUTO_TRAINING (1<<10) -#define FDI_LINK_TRAIN_PATTERN_1_CPT (0<<8) -#define FDI_LINK_TRAIN_PATTERN_2_CPT (1<<8) -#define FDI_LINK_TRAIN_PATTERN_IDLE_CPT (2<<8) -#define FDI_LINK_TRAIN_NORMAL_CPT (3<<8) -#define FDI_LINK_TRAIN_PATTERN_MASK_CPT (3<<8) - -#define _FDI_RXA_MISC 0xf0010 -#define _FDI_RXB_MISC 0xf1010 -#define FDI_RX_PWRDN_LANE1_MASK (3<<26) -#define FDI_RX_PWRDN_LANE1_VAL(x) ((x)<<26) -#define FDI_RX_PWRDN_LANE0_MASK (3<<24) -#define FDI_RX_PWRDN_LANE0_VAL(x) ((x)<<24) -#define FDI_RX_TP1_TO_TP2_48 (2<<20) -#define FDI_RX_TP1_TO_TP2_64 (3<<20) -#define FDI_RX_FDI_DELAY_90 (0x90<<0) -#define FDI_RX_MISC(pipe) _PIPE(pipe, _FDI_RXA_MISC, _FDI_RXB_MISC) - -#define _FDI_RXA_TUSIZE1 0xf0030 -#define _FDI_RXA_TUSIZE2 0xf0038 -#define _FDI_RXB_TUSIZE1 0xf1030 -#define _FDI_RXB_TUSIZE2 0xf1038 -#define FDI_RX_TUSIZE1(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE1, _FDI_RXB_TUSIZE1) -#define FDI_RX_TUSIZE2(pipe) _PIPE(pipe, _FDI_RXA_TUSIZE2, _FDI_RXB_TUSIZE2) - -/* FDI_RX interrupt register format */ -#define FDI_RX_INTER_LANE_ALIGN (1<<10) -#define FDI_RX_SYMBOL_LOCK (1<<9) /* train 2 */ -#define FDI_RX_BIT_LOCK (1<<8) /* train 1 */ -#define FDI_RX_TRAIN_PATTERN_2_FAIL (1<<7) -#define FDI_RX_FS_CODE_ERR (1<<6) -#define FDI_RX_FE_CODE_ERR (1<<5) -#define FDI_RX_SYMBOL_ERR_RATE_ABOVE (1<<4) -#define FDI_RX_HDCP_LINK_FAIL (1<<3) -#define FDI_RX_PIXEL_FIFO_OVERFLOW (1<<2) -#define FDI_RX_CROSS_CLOCK_OVERFLOW (1<<1) -#define FDI_RX_SYMBOL_QUEUE_OVERFLOW (1<<0) - -#define _FDI_RXA_IIR 0xf0014 -#define _FDI_RXA_IMR 0xf0018 -#define _FDI_RXB_IIR 0xf1014 -#define _FDI_RXB_IMR 0xf1018 -#define FDI_RX_IIR(pipe) _PIPE(pipe, _FDI_RXA_IIR, _FDI_RXB_IIR) -#define FDI_RX_IMR(pipe) _PIPE(pipe, _FDI_RXA_IMR, _FDI_RXB_IMR) - -#define FDI_PLL_CTL_1 0xfe000 -#define FDI_PLL_CTL_2 0xfe004 - -#define PCH_LVDS 0xe1180 -#define LVDS_DETECTED (1 << 1) - -/* vlv has 2 sets of panel control regs. */ -#define PIPEA_PP_STATUS (VLV_DISPLAY_BASE + 0x61200) -#define PIPEA_PP_CONTROL (VLV_DISPLAY_BASE + 0x61204) -#define PIPEA_PP_ON_DELAYS (VLV_DISPLAY_BASE + 0x61208) -#define PIPEA_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6120c) -#define PIPEA_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61210) - -#define PIPEB_PP_STATUS (VLV_DISPLAY_BASE + 0x61300) -#define PIPEB_PP_CONTROL (VLV_DISPLAY_BASE + 0x61304) -#define PIPEB_PP_ON_DELAYS (VLV_DISPLAY_BASE + 0x61308) -#define PIPEB_PP_OFF_DELAYS (VLV_DISPLAY_BASE + 0x6130c) -#define PIPEB_PP_DIVISOR (VLV_DISPLAY_BASE + 0x61310) - -#define VLV_PIPE_PP_STATUS(pipe) _PIPE(pipe, PIPEA_PP_STATUS, PIPEB_PP_STATUS) -#define VLV_PIPE_PP_CONTROL(pipe) _PIPE(pipe, PIPEA_PP_CONTROL, PIPEB_PP_CONTROL) -#define VLV_PIPE_PP_ON_DELAYS(pipe) \ - _PIPE(pipe, PIPEA_PP_ON_DELAYS, PIPEB_PP_ON_DELAYS) -#define VLV_PIPE_PP_OFF_DELAYS(pipe) \ - _PIPE(pipe, PIPEA_PP_OFF_DELAYS, PIPEB_PP_OFF_DELAYS) -#define VLV_PIPE_PP_DIVISOR(pipe) \ - _PIPE(pipe, PIPEA_PP_DIVISOR, PIPEB_PP_DIVISOR) - -#define PCH_PP_STATUS 0xc7200 -#define PCH_PP_CONTROL 0xc7204 -#define PANEL_UNLOCK_REGS (0xabcd << 16) -#define PANEL_UNLOCK_MASK (0xffff << 16) -#define EDP_FORCE_VDD (1 << 3) -#define EDP_BLC_ENABLE (1 << 2) -#define PANEL_POWER_RESET (1 << 1) -#define PANEL_POWER_OFF (0 << 0) -#define PANEL_POWER_ON (1 << 0) -#define PCH_PP_ON_DELAYS 0xc7208 -#define PANEL_PORT_SELECT_MASK (3 << 30) -#define PANEL_PORT_SELECT_LVDS (0 << 30) -#define PANEL_PORT_SELECT_DPA (1 << 30) -#define EDP_PANEL (1 << 30) -#define PANEL_PORT_SELECT_DPC (2 << 30) -#define PANEL_PORT_SELECT_DPD (3 << 30) -#define PANEL_POWER_UP_DELAY_MASK (0x1fff0000) -#define PANEL_POWER_UP_DELAY_SHIFT 16 -#define PANEL_LIGHT_ON_DELAY_MASK (0x1fff) -#define PANEL_LIGHT_ON_DELAY_SHIFT 0 - -#define PCH_PP_OFF_DELAYS 0xc720c -#define PANEL_POWER_PORT_SELECT_MASK (0x3 << 30) -#define PANEL_POWER_PORT_LVDS (0 << 30) -#define PANEL_POWER_PORT_DP_A (1 << 30) -#define PANEL_POWER_PORT_DP_C (2 << 30) -#define PANEL_POWER_PORT_DP_D (3 << 30) -#define PANEL_POWER_DOWN_DELAY_MASK (0x1fff0000) -#define PANEL_POWER_DOWN_DELAY_SHIFT 16 -#define PANEL_LIGHT_OFF_DELAY_MASK (0x1fff) -#define PANEL_LIGHT_OFF_DELAY_SHIFT 0 - -#define PCH_PP_DIVISOR 0xc7210 -#define PP_REFERENCE_DIVIDER_MASK (0xffffff00) -#define PP_REFERENCE_DIVIDER_SHIFT 8 -#define PANEL_POWER_CYCLE_DELAY_MASK (0x1f) -#define PANEL_POWER_CYCLE_DELAY_SHIFT 0 - -#define PCH_DP_B 0xe4100 -#define PCH_DPB_AUX_CH_CTL 0xe4110 -#define PCH_DPB_AUX_CH_DATA1 0xe4114 -#define PCH_DPB_AUX_CH_DATA2 0xe4118 -#define PCH_DPB_AUX_CH_DATA3 0xe411c -#define PCH_DPB_AUX_CH_DATA4 0xe4120 -#define PCH_DPB_AUX_CH_DATA5 0xe4124 - -#define PCH_DP_C 0xe4200 -#define PCH_DPC_AUX_CH_CTL 0xe4210 -#define PCH_DPC_AUX_CH_DATA1 0xe4214 -#define PCH_DPC_AUX_CH_DATA2 0xe4218 -#define PCH_DPC_AUX_CH_DATA3 0xe421c -#define PCH_DPC_AUX_CH_DATA4 0xe4220 -#define PCH_DPC_AUX_CH_DATA5 0xe4224 - -#define PCH_DP_D 0xe4300 -#define PCH_DPD_AUX_CH_CTL 0xe4310 -#define PCH_DPD_AUX_CH_DATA1 0xe4314 -#define PCH_DPD_AUX_CH_DATA2 0xe4318 -#define PCH_DPD_AUX_CH_DATA3 0xe431c -#define PCH_DPD_AUX_CH_DATA4 0xe4320 -#define PCH_DPD_AUX_CH_DATA5 0xe4324 - -/* CPT */ -#define PORT_TRANS_A_SEL_CPT 0 -#define PORT_TRANS_B_SEL_CPT (1<<29) -#define PORT_TRANS_C_SEL_CPT (2<<29) -#define PORT_TRANS_SEL_MASK (3<<29) -#define PORT_TRANS_SEL_CPT(pipe) ((pipe) << 29) -#define PORT_TO_PIPE(val) (((val) & (1<<30)) >> 30) -#define PORT_TO_PIPE_CPT(val) (((val) & PORT_TRANS_SEL_MASK) >> 29) - -#define TRANS_DP_CTL_A 0xe0300 -#define TRANS_DP_CTL_B 0xe1300 -#define TRANS_DP_CTL_C 0xe2300 -#define TRANS_DP_CTL(pipe) _PIPE(pipe, TRANS_DP_CTL_A, TRANS_DP_CTL_B) -#define TRANS_DP_OUTPUT_ENABLE (1<<31) -#define TRANS_DP_PORT_SEL_B (0<<29) -#define TRANS_DP_PORT_SEL_C (1<<29) -#define TRANS_DP_PORT_SEL_D (2<<29) -#define TRANS_DP_PORT_SEL_NONE (3<<29) -#define TRANS_DP_PORT_SEL_MASK (3<<29) -#define TRANS_DP_AUDIO_ONLY (1<<26) -#define TRANS_DP_ENH_FRAMING (1<<18) -#define TRANS_DP_8BPC (0<<9) -#define TRANS_DP_10BPC (1<<9) -#define TRANS_DP_6BPC (2<<9) -#define TRANS_DP_12BPC (3<<9) -#define TRANS_DP_BPC_MASK (3<<9) -#define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4) -#define TRANS_DP_VSYNC_ACTIVE_LOW 0 -#define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3) -#define TRANS_DP_HSYNC_ACTIVE_LOW 0 -#define TRANS_DP_SYNC_MASK (3<<3) - -/* SNB eDP training params */ -/* SNB A-stepping */ -#define EDP_LINK_TRAIN_400MV_0DB_SNB_A (0x38<<22) -#define EDP_LINK_TRAIN_400MV_6DB_SNB_A (0x02<<22) -#define EDP_LINK_TRAIN_600MV_3_5DB_SNB_A (0x01<<22) -#define EDP_LINK_TRAIN_800MV_0DB_SNB_A (0x0<<22) -/* SNB B-stepping */ -#define EDP_LINK_TRAIN_400_600MV_0DB_SNB_B (0x0<<22) -#define EDP_LINK_TRAIN_400MV_3_5DB_SNB_B (0x1<<22) -#define EDP_LINK_TRAIN_400_600MV_6DB_SNB_B (0x3a<<22) -#define EDP_LINK_TRAIN_600_800MV_3_5DB_SNB_B (0x39<<22) -#define EDP_LINK_TRAIN_800_1200MV_0DB_SNB_B (0x38<<22) -#define EDP_LINK_TRAIN_VOL_EMP_MASK_SNB (0x3f<<22) - -/* IVB */ -#define EDP_LINK_TRAIN_400MV_0DB_IVB (0x24 <<22) -#define EDP_LINK_TRAIN_400MV_3_5DB_IVB (0x2a <<22) -#define EDP_LINK_TRAIN_400MV_6DB_IVB (0x2f <<22) -#define EDP_LINK_TRAIN_600MV_0DB_IVB (0x30 <<22) -#define EDP_LINK_TRAIN_600MV_3_5DB_IVB (0x36 <<22) -#define EDP_LINK_TRAIN_800MV_0DB_IVB (0x38 <<22) -#define EDP_LINK_TRAIN_800MV_3_5DB_IVB (0x33 <<22) - -/* legacy values */ -#define EDP_LINK_TRAIN_500MV_0DB_IVB (0x00 <<22) -#define EDP_LINK_TRAIN_1000MV_0DB_IVB (0x20 <<22) -#define EDP_LINK_TRAIN_500MV_3_5DB_IVB (0x02 <<22) -#define EDP_LINK_TRAIN_1000MV_3_5DB_IVB (0x22 <<22) -#define EDP_LINK_TRAIN_1000MV_6DB_IVB (0x23 <<22) - -#define EDP_LINK_TRAIN_VOL_EMP_MASK_IVB (0x3f<<22) - -#define FORCEWAKE 0xA18C -#define FORCEWAKE_VLV 0x1300b0 -#define FORCEWAKE_ACK_VLV 0x1300b4 -#define FORCEWAKE_MEDIA_VLV 0x1300b8 -#define FORCEWAKE_ACK_MEDIA_VLV 0x1300bc -#define FORCEWAKE_ACK_HSW 0x130044 -#define FORCEWAKE_ACK 0x130090 -#define VLV_GTLC_WAKE_CTRL 0x130090 -#define VLV_GTLC_PW_STATUS 0x130094 -#define FORCEWAKE_MT 0xa188 /* multi-threaded */ -#define FORCEWAKE_KERNEL 0x1 -#define FORCEWAKE_USER 0x2 -#define FORCEWAKE_MT_ACK 0x130040 -#define ECOBUS 0xa180 -#define FORCEWAKE_MT_ENABLE (1<<5) - -#define GTFIFODBG 0x120000 -#define GT_FIFO_CPU_ERROR_MASK 7 -#define GT_FIFO_OVFERR (1<<2) -#define GT_FIFO_IAWRERR (1<<1) -#define GT_FIFO_IARDERR (1<<0) - -#define GT_FIFO_FREE_ENTRIES 0x120008 -#define GT_FIFO_NUM_RESERVED_ENTRIES 20 - -#define GEN6_UCGCTL1 0x9400 -# define GEN6_BLBUNIT_CLOCK_GATE_DISABLE (1 << 5) -# define GEN6_CSUNIT_CLOCK_GATE_DISABLE (1 << 7) - -#define GEN6_UCGCTL2 0x9404 -# define GEN7_VDSUNIT_CLOCK_GATE_DISABLE (1 << 30) -# define GEN7_TDLUNIT_CLOCK_GATE_DISABLE (1 << 22) -# define GEN6_RCZUNIT_CLOCK_GATE_DISABLE (1 << 13) -# define GEN6_RCPBUNIT_CLOCK_GATE_DISABLE (1 << 12) -# define GEN6_RCCUNIT_CLOCK_GATE_DISABLE (1 << 11) - -#define GEN7_UCGCTL4 0x940c -#define GEN7_L3BANK2X_CLOCK_GATE_DISABLE (1<<25) - -#define GEN6_RPNSWREQ 0xA008 -#define GEN6_TURBO_DISABLE (1<<31) -#define GEN6_FREQUENCY(x) ((x)<<25) -#define HSW_FREQUENCY(x) ((x)<<24) -#define GEN6_OFFSET(x) ((x)<<19) -#define GEN6_AGGRESSIVE_TURBO (0<<15) -#define GEN6_RC_VIDEO_FREQ 0xA00C -#define GEN6_RC_CONTROL 0xA090 -#define GEN6_RC_CTL_RC6pp_ENABLE (1<<16) -#define GEN6_RC_CTL_RC6p_ENABLE (1<<17) -#define GEN6_RC_CTL_RC6_ENABLE (1<<18) -#define GEN6_RC_CTL_RC1e_ENABLE (1<<20) -#define GEN6_RC_CTL_RC7_ENABLE (1<<22) -#define GEN7_RC_CTL_TO_MODE (1<<28) -#define GEN6_RC_CTL_EI_MODE(x) ((x)<<27) -#define GEN6_RC_CTL_HW_ENABLE (1<<31) -#define GEN6_RP_DOWN_TIMEOUT 0xA010 -#define GEN6_RP_INTERRUPT_LIMITS 0xA014 -#define GEN6_RPSTAT1 0xA01C -#define GEN6_CAGF_SHIFT 8 -#define HSW_CAGF_SHIFT 7 -#define GEN6_CAGF_MASK (0x7f << GEN6_CAGF_SHIFT) -#define HSW_CAGF_MASK (0x7f << HSW_CAGF_SHIFT) -#define GEN6_RP_CONTROL 0xA024 -#define GEN6_RP_MEDIA_TURBO (1<<11) -#define GEN6_RP_MEDIA_MODE_MASK (3<<9) -#define GEN6_RP_MEDIA_HW_TURBO_MODE (3<<9) -#define GEN6_RP_MEDIA_HW_NORMAL_MODE (2<<9) -#define GEN6_RP_MEDIA_HW_MODE (1<<9) -#define GEN6_RP_MEDIA_SW_MODE (0<<9) -#define GEN6_RP_MEDIA_IS_GFX (1<<8) -#define GEN6_RP_ENABLE (1<<7) -#define GEN6_RP_UP_IDLE_MIN (0x1<<3) -#define GEN6_RP_UP_BUSY_AVG (0x2<<3) -#define GEN6_RP_UP_BUSY_CONT (0x4<<3) -#define GEN7_RP_DOWN_IDLE_AVG (0x2<<0) -#define GEN6_RP_DOWN_IDLE_CONT (0x1<<0) -#define GEN6_RP_UP_THRESHOLD 0xA02C -#define GEN6_RP_DOWN_THRESHOLD 0xA030 -#define GEN6_RP_CUR_UP_EI 0xA050 -#define GEN6_CURICONT_MASK 0xffffff -#define GEN6_RP_CUR_UP 0xA054 -#define GEN6_CURBSYTAVG_MASK 0xffffff -#define GEN6_RP_PREV_UP 0xA058 -#define GEN6_RP_CUR_DOWN_EI 0xA05C -#define GEN6_CURIAVG_MASK 0xffffff -#define GEN6_RP_CUR_DOWN 0xA060 -#define GEN6_RP_PREV_DOWN 0xA064 -#define GEN6_RP_UP_EI 0xA068 -#define GEN6_RP_DOWN_EI 0xA06C -#define GEN6_RP_IDLE_HYSTERSIS 0xA070 -#define GEN6_RC_STATE 0xA094 -#define GEN6_RC1_WAKE_RATE_LIMIT 0xA098 -#define GEN6_RC6_WAKE_RATE_LIMIT 0xA09C -#define GEN6_RC6pp_WAKE_RATE_LIMIT 0xA0A0 -#define GEN6_RC_EVALUATION_INTERVAL 0xA0A8 -#define GEN6_RC_IDLE_HYSTERSIS 0xA0AC -#define GEN6_RC_SLEEP 0xA0B0 -#define GEN6_RC1e_THRESHOLD 0xA0B4 -#define GEN6_RC6_THRESHOLD 0xA0B8 -#define GEN6_RC6p_THRESHOLD 0xA0BC -#define GEN6_RC6pp_THRESHOLD 0xA0C0 -#define GEN6_PMINTRMSK 0xA168 - -#define GEN6_PMISR 0x44020 -#define GEN6_PMIMR 0x44024 /* rps_lock */ -#define GEN6_PMIIR 0x44028 -#define GEN6_PMIER 0x4402C -#define GEN6_PM_MBOX_EVENT (1<<25) -#define GEN6_PM_THERMAL_EVENT (1<<24) -#define GEN6_PM_RP_DOWN_TIMEOUT (1<<6) -#define GEN6_PM_RP_UP_THRESHOLD (1<<5) -#define GEN6_PM_RP_DOWN_THRESHOLD (1<<4) -#define GEN6_PM_RP_UP_EI_EXPIRED (1<<2) -#define GEN6_PM_RP_DOWN_EI_EXPIRED (1<<1) -#define GEN6_PM_RPS_EVENTS (GEN6_PM_RP_UP_THRESHOLD | \ - GEN6_PM_RP_DOWN_THRESHOLD | \ - GEN6_PM_RP_DOWN_TIMEOUT) - -#define GEN6_GT_GFX_RC6_LOCKED 0x138104 -#define GEN6_GT_GFX_RC6 0x138108 -#define GEN6_GT_GFX_RC6p 0x13810C -#define GEN6_GT_GFX_RC6pp 0x138110 - -#define GEN6_PCODE_MAILBOX 0x138124 -#define GEN6_PCODE_READY (1<<31) -#define GEN6_READ_OC_PARAMS 0xc +#define CHASSIS_CLK_REQ_DURATION_MASK (0xf << 8) +#define CHASSIS_CLK_REQ_DURATION(x) ((x) << 8) +#define SBCLK_RUN_REFCLK_DIS (1 << 7) +#define ICP_SECOND_PPS_IO_SELECT REG_BIT(2) +#define SPT_PWM_GRANULARITY (1 << 0) +#define SOUTH_CHICKEN2 _MMIO(0xc2004) +#define FDI_MPHY_IOSFSB_RESET_STATUS (1 << 13) +#define FDI_MPHY_IOSFSB_RESET_CTL (1 << 12) +#define LPT_PWM_GRANULARITY (1 << 5) +#define DPLS_EDP_PPS_FIX_DIS (1 << 0) + +#define SOUTH_DSPCLK_GATE_D _MMIO(0xc2020) +#define PCH_GMBUSUNIT_CLOCK_GATE_DISABLE (1 << 31) +#define PCH_DPLUNIT_CLOCK_GATE_DISABLE (1 << 30) +#define PCH_DPLSUNIT_CLOCK_GATE_DISABLE (1 << 29) +#define PCH_DPMGUNIT_CLOCK_GATE_DISABLE (1 << 15) +#define PCH_CPUNIT_CLOCK_GATE_DISABLE (1 << 14) +#define CNP_PWM_CGE_GATING_DISABLE (1 << 13) +#define PCH_LP_PARTITION_LEVEL_DISABLE (1 << 12) + +#define VLV_PMWGICZ _MMIO(0x1300a4) + +#define HSW_EDRAM_CAP _MMIO(0x120010) +#define EDRAM_ENABLED 0x1 +#define EDRAM_NUM_BANKS(cap) (((cap) >> 1) & 0xf) +#define EDRAM_WAYS_IDX(cap) (((cap) >> 5) & 0x7) +#define EDRAM_SETS_IDX(cap) (((cap) >> 8) & 0x3) + +#define GEN6_PCODE_MAILBOX _MMIO(0x138124) +#define GEN6_PCODE_READY (1 << 31) +#define GEN6_PCODE_MB_PARAM2 REG_GENMASK(23, 16) +#define GEN6_PCODE_MB_PARAM1 REG_GENMASK(15, 8) +#define GEN6_PCODE_MB_COMMAND REG_GENMASK(7, 0) +#define GEN6_PCODE_ERROR_MASK 0xFF +#define GEN6_PCODE_SUCCESS 0x0 +#define GEN6_PCODE_ILLEGAL_CMD 0x1 +#define GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x2 +#define GEN6_PCODE_TIMEOUT 0x3 +#define GEN6_PCODE_UNIMPLEMENTED_CMD 0xFF +#define GEN7_PCODE_TIMEOUT 0x2 +#define GEN7_PCODE_ILLEGAL_DATA 0x3 +#define GEN11_PCODE_ILLEGAL_SUBCOMMAND 0x4 +#define GEN11_PCODE_LOCKED 0x6 +#define GEN11_PCODE_REJECTED 0x11 +#define GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE 0x10 +#define GEN6_PCODE_WRITE_RC6VIDS 0x4 +#define GEN6_PCODE_READ_RC6VIDS 0x5 +#define GEN6_ENCODE_RC6_VID(mv) (((mv) - 245) / 5) +#define GEN6_DECODE_RC6_VID(vids) (((vids) * 5) + 245) +#define BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ 0x18 +#define GEN9_PCODE_READ_MEM_LATENCY 0x6 +#define GEN9_MEM_LATENCY_LEVEL_3_7_MASK REG_GENMASK(31, 24) +#define GEN9_MEM_LATENCY_LEVEL_2_6_MASK REG_GENMASK(23, 16) +#define GEN9_MEM_LATENCY_LEVEL_1_5_MASK REG_GENMASK(15, 8) +#define GEN9_MEM_LATENCY_LEVEL_0_4_MASK REG_GENMASK(7, 0) +#define SKL_PCODE_LOAD_HDCP_KEYS 0x5 +#define SKL_PCODE_CDCLK_CONTROL 0x7 +#define SKL_CDCLK_PREPARE_FOR_CHANGE 0x3 +#define SKL_CDCLK_READY_FOR_CHANGE 0x1 #define GEN6_PCODE_WRITE_MIN_FREQ_TABLE 0x8 #define GEN6_PCODE_READ_MIN_FREQ_TABLE 0x9 -#define GEN6_PCODE_WRITE_RC6VIDS 0x4 -#define GEN6_PCODE_READ_RC6VIDS 0x5 -#define GEN6_ENCODE_RC6_VID(mv) (((mv) - 245) / 5) -#define GEN6_DECODE_RC6_VID(vids) (((vids) * 5) + 245) -#define GEN6_PCODE_DATA 0x138128 +#define GEN6_READ_OC_PARAMS 0xc +#define ICL_PCODE_MEM_SUBSYSYSTEM_INFO 0xd +#define ICL_PCODE_MEM_SS_READ_GLOBAL_INFO (0x0 << 8) +#define ICL_PCODE_MEM_SS_READ_QGV_POINT_INFO(point) (((point) << 16) | (0x1 << 8)) +#define ADL_PCODE_MEM_SS_READ_PSF_GV_INFO ((0) | (0x2 << 8)) +#define DISPLAY_TO_PCODE_CDCLK_MAX 0x28D +#define DISPLAY_TO_PCODE_VOLTAGE_MASK REG_GENMASK(1, 0) +#define DISPLAY_TO_PCODE_VOLTAGE_MAX DISPLAY_TO_PCODE_VOLTAGE_MASK +#define DISPLAY_TO_PCODE_CDCLK_VALID REG_BIT(27) +#define DISPLAY_TO_PCODE_PIPE_COUNT_VALID REG_BIT(31) +#define DISPLAY_TO_PCODE_CDCLK_MASK REG_GENMASK(25, 16) +#define DISPLAY_TO_PCODE_PIPE_COUNT_MASK REG_GENMASK(30, 28) +#define DISPLAY_TO_PCODE_CDCLK(x) REG_FIELD_PREP(DISPLAY_TO_PCODE_CDCLK_MASK, (x)) +#define DISPLAY_TO_PCODE_PIPE_COUNT(x) REG_FIELD_PREP(DISPLAY_TO_PCODE_PIPE_COUNT_MASK, (x)) +#define DISPLAY_TO_PCODE_VOLTAGE(x) REG_FIELD_PREP(DISPLAY_TO_PCODE_VOLTAGE_MASK, (x)) +#define DISPLAY_TO_PCODE_UPDATE_MASK(cdclk, num_pipes, voltage_level) \ + ((DISPLAY_TO_PCODE_CDCLK(cdclk)) | \ + (DISPLAY_TO_PCODE_PIPE_COUNT(num_pipes)) | \ + (DISPLAY_TO_PCODE_VOLTAGE(voltage_level))) +#define ICL_PCODE_SAGV_DE_MEM_SS_CONFIG 0xe +#define ICL_PCODE_REP_QGV_MASK REG_GENMASK(1, 0) +#define ICL_PCODE_REP_QGV_SAFE REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 0) +#define ICL_PCODE_REP_QGV_POLL REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 1) +#define ICL_PCODE_REP_QGV_REJECTED REG_FIELD_PREP(ICL_PCODE_REP_QGV_MASK, 2) +#define ADLS_PCODE_REP_PSF_MASK REG_GENMASK(3, 2) +#define ADLS_PCODE_REP_PSF_SAFE REG_FIELD_PREP(ADLS_PCODE_REP_PSF_MASK, 0) +#define ADLS_PCODE_REP_PSF_POLL REG_FIELD_PREP(ADLS_PCODE_REP_PSF_MASK, 1) +#define ADLS_PCODE_REP_PSF_REJECTED REG_FIELD_PREP(ADLS_PCODE_REP_PSF_MASK, 2) +#define ICL_PCODE_REQ_QGV_PT_MASK REG_GENMASK(7, 0) +#define ICL_PCODE_REQ_QGV_PT(x) REG_FIELD_PREP(ICL_PCODE_REQ_QGV_PT_MASK, (x)) +#define ADLS_PCODE_REQ_PSF_PT_MASK REG_GENMASK(10, 8) +#define ADLS_PCODE_REQ_PSF_PT(x) REG_FIELD_PREP(ADLS_PCODE_REQ_PSF_PT_MASK, (x)) +#define GEN6_PCODE_READ_D_COMP 0x10 +#define GEN6_PCODE_WRITE_D_COMP 0x11 +#define ICL_PCODE_EXIT_TCCOLD 0x12 +#define HSW_PCODE_DE_WRITE_FREQ_REQ 0x17 +#define DISPLAY_IPS_CONTROL 0x19 +#define TGL_PCODE_TCCOLD 0x26 +#define TGL_PCODE_EXIT_TCCOLD_DATA_L_EXIT_FAILED REG_BIT(0) +#define TGL_PCODE_EXIT_TCCOLD_DATA_L_BLOCK_REQ 0 +#define TGL_PCODE_EXIT_TCCOLD_DATA_L_UNBLOCK_REQ REG_BIT(0) + /* See also IPS_CTL */ +#define IPS_PCODE_CONTROL (1 << 30) +#define HSW_PCODE_DYNAMIC_DUTY_CYCLE_CONTROL 0x1A +#define GEN9_PCODE_SAGV_CONTROL 0x21 +#define GEN9_SAGV_DISABLE 0x0 +#define GEN9_SAGV_IS_DISABLED 0x1 +#define GEN9_SAGV_ENABLE 0x3 +#define DG1_PCODE_STATUS 0x7E +#define DG1_UNCORE_GET_INIT_STATUS 0x0 +#define DG1_UNCORE_INIT_STATUS_COMPLETE 0x1 +#define PCODE_POWER_SETUP 0x7C +#define POWER_SETUP_SUBCOMMAND_READ_I1 0x4 +#define POWER_SETUP_SUBCOMMAND_WRITE_I1 0x5 +#define POWER_SETUP_I1_WATTS REG_BIT(31) +#define POWER_SETUP_I1_SHIFT 6 /* 10.6 fixed point format */ +#define POWER_SETUP_I1_DATA_MASK REG_GENMASK(15, 0) +#define POWER_SETUP_SUBCOMMAND_G8_ENABLE 0x6 +#define GEN12_PCODE_READ_SAGV_BLOCK_TIME_US 0x23 +#define XEHP_PCODE_FREQUENCY_CONFIG 0x6e /* pvc */ +/* XEHP_PCODE_FREQUENCY_CONFIG sub-commands (param1) */ +#define PCODE_MBOX_FC_SC_READ_FUSED_P0 0x0 +#define PCODE_MBOX_FC_SC_READ_FUSED_PN 0x1 +/* PCODE_MBOX_DOMAIN_* - mailbox domain IDs */ +/* XEHP_PCODE_FREQUENCY_CONFIG param2 */ +#define PCODE_MBOX_DOMAIN_NONE 0x0 +#define PCODE_MBOX_DOMAIN_MEDIAFF 0x3 +#define GEN6_PCODE_DATA _MMIO(0x138128) #define GEN6_PCODE_FREQ_IA_RATIO_SHIFT 8 #define GEN6_PCODE_FREQ_RING_RATIO_SHIFT 16 +#define GEN6_PCODE_DATA1 _MMIO(0x13812C) -#define GEN6_GT_CORE_STATUS 0x138060 -#define GEN6_CORE_CPD_STATE_MASK (7<<4) -#define GEN6_RCn_MASK 7 -#define GEN6_RC0 0 -#define GEN6_RC3 2 -#define GEN6_RC6 3 -#define GEN6_RC7 4 - -#define GEN7_MISCCPCTL (0x9424) -#define GEN7_DOP_CLOCK_GATE_ENABLE (1<<0) +#define MTL_PCODE_STOLEN_ACCESS _MMIO(0x138914) +#define STOLEN_ACCESS_ALLOWED 0x1 /* IVYBRIDGE DPF */ -#define GEN7_L3CDERRST1 0xB008 /* L3CD Error Status 1 */ -#define GEN7_L3CDERRST1_ROW_MASK (0x7ff<<14) -#define GEN7_PARITY_ERROR_VALID (1<<13) -#define GEN7_L3CDERRST1_BANK_MASK (3<<11) -#define GEN7_L3CDERRST1_SUBBANK_MASK (7<<8) +#define GEN7_L3CDERRST1(slice) _MMIO(0xB008 + (slice) * 0x200) /* L3CD Error Status 1 */ +#define GEN7_L3CDERRST1_ROW_MASK (0x7ff << 14) +#define GEN7_PARITY_ERROR_VALID (1 << 13) +#define GEN7_L3CDERRST1_BANK_MASK (3 << 11) +#define GEN7_L3CDERRST1_SUBBANK_MASK (7 << 8) #define GEN7_PARITY_ERROR_ROW(reg) \ - ((reg & GEN7_L3CDERRST1_ROW_MASK) >> 14) + (((reg) & GEN7_L3CDERRST1_ROW_MASK) >> 14) #define GEN7_PARITY_ERROR_BANK(reg) \ - ((reg & GEN7_L3CDERRST1_BANK_MASK) >> 11) + (((reg) & GEN7_L3CDERRST1_BANK_MASK) >> 11) #define GEN7_PARITY_ERROR_SUBBANK(reg) \ - ((reg & GEN7_L3CDERRST1_SUBBANK_MASK) >> 8) -#define GEN7_L3CDERRST1_ENABLE (1<<7) - -#define GEN7_L3LOG_BASE 0xB070 -#define GEN7_L3LOG_SIZE 0x80 - -#define GEN7_HALF_SLICE_CHICKEN1 0xe100 /* IVB GT1 + VLV */ -#define GEN7_HALF_SLICE_CHICKEN1_GT2 0xf100 -#define GEN7_MAX_PS_THREAD_DEP (8<<12) -#define GEN7_PSD_SINGLE_PORT_DISPATCH_ENABLE (1<<3) - -#define GEN7_ROW_CHICKEN2 0xe4f4 -#define GEN7_ROW_CHICKEN2_GT2 0xf4f4 -#define DOP_CLOCK_GATING_DISABLE (1<<0) - -#define G4X_AUD_VID_DID (dev_priv->info->display_mmio_offset + 0x62020) -#define INTEL_AUDIO_DEVCL 0x808629FB -#define INTEL_AUDIO_DEVBLC 0x80862801 -#define INTEL_AUDIO_DEVCTG 0x80862802 - -#define G4X_AUD_CNTL_ST 0x620B4 -#define G4X_ELDV_DEVCL_DEVBLC (1 << 13) -#define G4X_ELDV_DEVCTG (1 << 14) -#define G4X_ELD_ADDR (0xf << 5) -#define G4X_ELD_ACK (1 << 4) -#define G4X_HDMIW_HDMIEDID 0x6210C - -#define IBX_HDMIW_HDMIEDID_A 0xE2050 -#define IBX_HDMIW_HDMIEDID_B 0xE2150 -#define IBX_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \ - IBX_HDMIW_HDMIEDID_A, \ - IBX_HDMIW_HDMIEDID_B) -#define IBX_AUD_CNTL_ST_A 0xE20B4 -#define IBX_AUD_CNTL_ST_B 0xE21B4 -#define IBX_AUD_CNTL_ST(pipe) _PIPE(pipe, \ - IBX_AUD_CNTL_ST_A, \ - IBX_AUD_CNTL_ST_B) -#define IBX_ELD_BUFFER_SIZE (0x1f << 10) -#define IBX_ELD_ADDRESS (0x1f << 5) -#define IBX_ELD_ACK (1 << 4) -#define IBX_AUD_CNTL_ST2 0xE20C0 -#define IBX_ELD_VALIDB (1 << 0) -#define IBX_CP_READYB (1 << 1) - -#define CPT_HDMIW_HDMIEDID_A 0xE5050 -#define CPT_HDMIW_HDMIEDID_B 0xE5150 -#define CPT_HDMIW_HDMIEDID(pipe) _PIPE(pipe, \ - CPT_HDMIW_HDMIEDID_A, \ - CPT_HDMIW_HDMIEDID_B) -#define CPT_AUD_CNTL_ST_A 0xE50B4 -#define CPT_AUD_CNTL_ST_B 0xE51B4 -#define CPT_AUD_CNTL_ST(pipe) _PIPE(pipe, \ - CPT_AUD_CNTL_ST_A, \ - CPT_AUD_CNTL_ST_B) -#define CPT_AUD_CNTRL_ST2 0xE50C0 + (((reg) & GEN7_L3CDERRST1_SUBBANK_MASK) >> 8) +#define GEN7_L3CDERRST1_ENABLE (1 << 7) /* These are the 4 32-bit write offset registers for each stream * output buffer. It determines the offset from the * 3DSTATE_SO_BUFFERs that the next streamed vertex output goes to. */ -#define GEN7_SO_WRITE_OFFSET(n) (0x5280 + (n) * 4) - -#define IBX_AUD_CONFIG_A 0xe2000 -#define IBX_AUD_CONFIG_B 0xe2100 -#define IBX_AUD_CFG(pipe) _PIPE(pipe, \ - IBX_AUD_CONFIG_A, \ - IBX_AUD_CONFIG_B) -#define CPT_AUD_CONFIG_A 0xe5000 -#define CPT_AUD_CONFIG_B 0xe5100 -#define CPT_AUD_CFG(pipe) _PIPE(pipe, \ - CPT_AUD_CONFIG_A, \ - CPT_AUD_CONFIG_B) -#define AUD_CONFIG_N_VALUE_INDEX (1 << 29) -#define AUD_CONFIG_N_PROG_ENABLE (1 << 28) -#define AUD_CONFIG_UPPER_N_SHIFT 20 -#define AUD_CONFIG_UPPER_N_VALUE (0xff << 20) -#define AUD_CONFIG_LOWER_N_SHIFT 4 -#define AUD_CONFIG_LOWER_N_VALUE (0xfff << 4) -#define AUD_CONFIG_PIXEL_CLOCK_HDMI_SHIFT 16 -#define AUD_CONFIG_PIXEL_CLOCK_HDMI (0xf << 16) -#define AUD_CONFIG_DISABLE_NCTS (1 << 3) - -/* HSW Audio */ -#define HSW_AUD_CONFIG_A 0x65000 /* Audio Configuration Transcoder A */ -#define HSW_AUD_CONFIG_B 0x65100 /* Audio Configuration Transcoder B */ -#define HSW_AUD_CFG(pipe) _PIPE(pipe, \ - HSW_AUD_CONFIG_A, \ - HSW_AUD_CONFIG_B) - -#define HSW_AUD_MISC_CTRL_A 0x65010 /* Audio Misc Control Convert 1 */ -#define HSW_AUD_MISC_CTRL_B 0x65110 /* Audio Misc Control Convert 2 */ -#define HSW_AUD_MISC_CTRL(pipe) _PIPE(pipe, \ - HSW_AUD_MISC_CTRL_A, \ - HSW_AUD_MISC_CTRL_B) - -#define HSW_AUD_DIP_ELD_CTRL_ST_A 0x650b4 /* Audio DIP and ELD Control State Transcoder A */ -#define HSW_AUD_DIP_ELD_CTRL_ST_B 0x651b4 /* Audio DIP and ELD Control State Transcoder B */ -#define HSW_AUD_DIP_ELD_CTRL(pipe) _PIPE(pipe, \ - HSW_AUD_DIP_ELD_CTRL_ST_A, \ - HSW_AUD_DIP_ELD_CTRL_ST_B) - -/* Audio Digital Converter */ -#define HSW_AUD_DIG_CNVT_1 0x65080 /* Audio Converter 1 */ -#define HSW_AUD_DIG_CNVT_2 0x65180 /* Audio Converter 1 */ -#define AUD_DIG_CNVT(pipe) _PIPE(pipe, \ - HSW_AUD_DIG_CNVT_1, \ - HSW_AUD_DIG_CNVT_2) -#define DIP_PORT_SEL_MASK 0x3 - -#define HSW_AUD_EDID_DATA_A 0x65050 -#define HSW_AUD_EDID_DATA_B 0x65150 -#define HSW_AUD_EDID_DATA(pipe) _PIPE(pipe, \ - HSW_AUD_EDID_DATA_A, \ - HSW_AUD_EDID_DATA_B) - -#define HSW_AUD_PIPE_CONV_CFG 0x6507c /* Audio pipe and converter configs */ -#define HSW_AUD_PIN_ELD_CP_VLD 0x650c0 /* Audio ELD and CP Ready Status */ -#define AUDIO_INACTIVE_C (1<<11) -#define AUDIO_INACTIVE_B (1<<7) -#define AUDIO_INACTIVE_A (1<<3) -#define AUDIO_OUTPUT_ENABLE_A (1<<2) -#define AUDIO_OUTPUT_ENABLE_B (1<<6) -#define AUDIO_OUTPUT_ENABLE_C (1<<10) -#define AUDIO_ELD_VALID_A (1<<0) -#define AUDIO_ELD_VALID_B (1<<4) -#define AUDIO_ELD_VALID_C (1<<8) -#define AUDIO_CP_READY_A (1<<1) -#define AUDIO_CP_READY_B (1<<5) -#define AUDIO_CP_READY_C (1<<9) - -/* HSW Power Wells */ -#define HSW_PWR_WELL_BIOS 0x45400 /* CTL1 */ -#define HSW_PWR_WELL_DRIVER 0x45404 /* CTL2 */ -#define HSW_PWR_WELL_KVMR 0x45408 /* CTL3 */ -#define HSW_PWR_WELL_DEBUG 0x4540C /* CTL4 */ -#define HSW_PWR_WELL_ENABLE (1<<31) -#define HSW_PWR_WELL_STATE (1<<30) -#define HSW_PWR_WELL_CTL5 0x45410 -#define HSW_PWR_WELL_ENABLE_SINGLE_STEP (1<<31) -#define HSW_PWR_WELL_PWR_GATE_OVERRIDE (1<<20) -#define HSW_PWR_WELL_FORCE_ON (1<<19) -#define HSW_PWR_WELL_CTL6 0x45414 - -/* Per-pipe DDI Function Control */ -#define TRANS_DDI_FUNC_CTL_A 0x60400 -#define TRANS_DDI_FUNC_CTL_B 0x61400 -#define TRANS_DDI_FUNC_CTL_C 0x62400 -#define TRANS_DDI_FUNC_CTL_EDP 0x6F400 -#define TRANS_DDI_FUNC_CTL(tran) _TRANSCODER(tran, TRANS_DDI_FUNC_CTL_A, \ - TRANS_DDI_FUNC_CTL_B) -#define TRANS_DDI_FUNC_ENABLE (1<<31) -/* Those bits are ignored by pipe EDP since it can only connect to DDI A */ -#define TRANS_DDI_PORT_MASK (7<<28) -#define TRANS_DDI_SELECT_PORT(x) ((x)<<28) -#define TRANS_DDI_PORT_NONE (0<<28) -#define TRANS_DDI_MODE_SELECT_MASK (7<<24) -#define TRANS_DDI_MODE_SELECT_HDMI (0<<24) -#define TRANS_DDI_MODE_SELECT_DVI (1<<24) -#define TRANS_DDI_MODE_SELECT_DP_SST (2<<24) -#define TRANS_DDI_MODE_SELECT_DP_MST (3<<24) -#define TRANS_DDI_MODE_SELECT_FDI (4<<24) -#define TRANS_DDI_BPC_MASK (7<<20) -#define TRANS_DDI_BPC_8 (0<<20) -#define TRANS_DDI_BPC_10 (1<<20) -#define TRANS_DDI_BPC_6 (2<<20) -#define TRANS_DDI_BPC_12 (3<<20) -#define TRANS_DDI_PVSYNC (1<<17) -#define TRANS_DDI_PHSYNC (1<<16) -#define TRANS_DDI_EDP_INPUT_MASK (7<<12) -#define TRANS_DDI_EDP_INPUT_A_ON (0<<12) -#define TRANS_DDI_EDP_INPUT_A_ONOFF (4<<12) -#define TRANS_DDI_EDP_INPUT_B_ONOFF (5<<12) -#define TRANS_DDI_EDP_INPUT_C_ONOFF (6<<12) -#define TRANS_DDI_BFI_ENABLE (1<<4) - -/* DisplayPort Transport Control */ -#define DP_TP_CTL_A 0x64040 -#define DP_TP_CTL_B 0x64140 -#define DP_TP_CTL(port) _PORT(port, DP_TP_CTL_A, DP_TP_CTL_B) -#define DP_TP_CTL_ENABLE (1<<31) -#define DP_TP_CTL_MODE_SST (0<<27) -#define DP_TP_CTL_MODE_MST (1<<27) -#define DP_TP_CTL_ENHANCED_FRAME_ENABLE (1<<18) -#define DP_TP_CTL_FDI_AUTOTRAIN (1<<15) -#define DP_TP_CTL_LINK_TRAIN_MASK (7<<8) -#define DP_TP_CTL_LINK_TRAIN_PAT1 (0<<8) -#define DP_TP_CTL_LINK_TRAIN_PAT2 (1<<8) -#define DP_TP_CTL_LINK_TRAIN_PAT3 (4<<8) -#define DP_TP_CTL_LINK_TRAIN_IDLE (2<<8) -#define DP_TP_CTL_LINK_TRAIN_NORMAL (3<<8) -#define DP_TP_CTL_SCRAMBLE_DISABLE (1<<7) - -/* DisplayPort Transport Status */ -#define DP_TP_STATUS_A 0x64044 -#define DP_TP_STATUS_B 0x64144 -#define DP_TP_STATUS(port) _PORT(port, DP_TP_STATUS_A, DP_TP_STATUS_B) -#define DP_TP_STATUS_IDLE_DONE (1<<25) -#define DP_TP_STATUS_AUTOTRAIN_DONE (1<<12) - -/* DDI Buffer Control */ -#define DDI_BUF_CTL_A 0x64000 -#define DDI_BUF_CTL_B 0x64100 -#define DDI_BUF_CTL(port) _PORT(port, DDI_BUF_CTL_A, DDI_BUF_CTL_B) -#define DDI_BUF_CTL_ENABLE (1<<31) -#define DDI_BUF_EMP_400MV_0DB_HSW (0<<24) /* Sel0 */ -#define DDI_BUF_EMP_400MV_3_5DB_HSW (1<<24) /* Sel1 */ -#define DDI_BUF_EMP_400MV_6DB_HSW (2<<24) /* Sel2 */ -#define DDI_BUF_EMP_400MV_9_5DB_HSW (3<<24) /* Sel3 */ -#define DDI_BUF_EMP_600MV_0DB_HSW (4<<24) /* Sel4 */ -#define DDI_BUF_EMP_600MV_3_5DB_HSW (5<<24) /* Sel5 */ -#define DDI_BUF_EMP_600MV_6DB_HSW (6<<24) /* Sel6 */ -#define DDI_BUF_EMP_800MV_0DB_HSW (7<<24) /* Sel7 */ -#define DDI_BUF_EMP_800MV_3_5DB_HSW (8<<24) /* Sel8 */ -#define DDI_BUF_EMP_MASK (0xf<<24) -#define DDI_BUF_PORT_REVERSAL (1<<16) -#define DDI_BUF_IS_IDLE (1<<7) -#define DDI_A_4_LANES (1<<4) -#define DDI_PORT_WIDTH(width) (((width) - 1) << 1) -#define DDI_INIT_DISPLAY_DETECTED (1<<0) - -/* DDI Buffer Translations */ -#define DDI_BUF_TRANS_A 0x64E00 -#define DDI_BUF_TRANS_B 0x64E60 -#define DDI_BUF_TRANS(port) _PORT(port, DDI_BUF_TRANS_A, DDI_BUF_TRANS_B) - -/* Sideband Interface (SBI) is programmed indirectly, via - * SBI_ADDR, which contains the register offset; and SBI_DATA, - * which contains the payload */ -#define SBI_ADDR 0xC6000 -#define SBI_DATA 0xC6004 -#define SBI_CTL_STAT 0xC6008 -#define SBI_CTL_DEST_ICLK (0x0<<16) -#define SBI_CTL_DEST_MPHY (0x1<<16) -#define SBI_CTL_OP_IORD (0x2<<8) -#define SBI_CTL_OP_IOWR (0x3<<8) -#define SBI_CTL_OP_CRRD (0x6<<8) -#define SBI_CTL_OP_CRWR (0x7<<8) -#define SBI_RESPONSE_FAIL (0x1<<1) -#define SBI_RESPONSE_SUCCESS (0x0<<1) -#define SBI_BUSY (0x1<<0) -#define SBI_READY (0x0<<0) - -/* SBI offsets */ -#define SBI_SSCDIVINTPHASE6 0x0600 -#define SBI_SSCDIVINTPHASE_DIVSEL_MASK ((0x7f)<<1) -#define SBI_SSCDIVINTPHASE_DIVSEL(x) ((x)<<1) -#define SBI_SSCDIVINTPHASE_INCVAL_MASK ((0x7f)<<8) -#define SBI_SSCDIVINTPHASE_INCVAL(x) ((x)<<8) -#define SBI_SSCDIVINTPHASE_DIR(x) ((x)<<15) -#define SBI_SSCDIVINTPHASE_PROPAGATE (1<<0) -#define SBI_SSCCTL 0x020c -#define SBI_SSCCTL6 0x060C -#define SBI_SSCCTL_PATHALT (1<<3) -#define SBI_SSCCTL_DISABLE (1<<0) -#define SBI_SSCAUXDIV6 0x0610 -#define SBI_SSCAUXDIV_FINALDIV2SEL(x) ((x)<<4) -#define SBI_DBUFF0 0x2a00 -#define SBI_DBUFF0_ENABLE (1<<0) - -/* LPT PIXCLK_GATE */ -#define PIXCLK_GATE 0xC6020 -#define PIXCLK_GATE_UNGATE (1<<0) -#define PIXCLK_GATE_GATE (0<<0) - -/* SPLL */ -#define SPLL_CTL 0x46020 -#define SPLL_PLL_ENABLE (1<<31) -#define SPLL_PLL_SSC (1<<28) -#define SPLL_PLL_NON_SSC (2<<28) -#define SPLL_PLL_FREQ_810MHz (0<<26) -#define SPLL_PLL_FREQ_1350MHz (1<<26) - -/* WRPLL */ -#define WRPLL_CTL1 0x46040 -#define WRPLL_CTL2 0x46060 -#define WRPLL_PLL_ENABLE (1<<31) -#define WRPLL_PLL_SELECT_SSC (0x01<<28) -#define WRPLL_PLL_SELECT_NON_SSC (0x02<<28) -#define WRPLL_PLL_SELECT_LCPLL_2700 (0x03<<28) -/* WRPLL divider programming */ -#define WRPLL_DIVIDER_REFERENCE(x) ((x)<<0) -#define WRPLL_DIVIDER_POST(x) ((x)<<8) -#define WRPLL_DIVIDER_FEEDBACK(x) ((x)<<16) - -/* Port clock selection */ -#define PORT_CLK_SEL_A 0x46100 -#define PORT_CLK_SEL_B 0x46104 -#define PORT_CLK_SEL(port) _PORT(port, PORT_CLK_SEL_A, PORT_CLK_SEL_B) -#define PORT_CLK_SEL_LCPLL_2700 (0<<29) -#define PORT_CLK_SEL_LCPLL_1350 (1<<29) -#define PORT_CLK_SEL_LCPLL_810 (2<<29) -#define PORT_CLK_SEL_SPLL (3<<29) -#define PORT_CLK_SEL_WRPLL1 (4<<29) -#define PORT_CLK_SEL_WRPLL2 (5<<29) -#define PORT_CLK_SEL_NONE (7<<29) - -/* Transcoder clock selection */ -#define TRANS_CLK_SEL_A 0x46140 -#define TRANS_CLK_SEL_B 0x46144 -#define TRANS_CLK_SEL(tran) _TRANSCODER(tran, TRANS_CLK_SEL_A, TRANS_CLK_SEL_B) -/* For each transcoder, we need to select the corresponding port clock */ -#define TRANS_CLK_SEL_DISABLED (0x0<<29) -#define TRANS_CLK_SEL_PORT(x) ((x+1)<<29) - -#define _TRANSA_MSA_MISC 0x60410 -#define _TRANSB_MSA_MISC 0x61410 -#define TRANS_MSA_MISC(tran) _TRANSCODER(tran, _TRANSA_MSA_MISC, \ - _TRANSB_MSA_MISC) -#define TRANS_MSA_SYNC_CLK (1<<0) -#define TRANS_MSA_6_BPC (0<<5) -#define TRANS_MSA_8_BPC (1<<5) -#define TRANS_MSA_10_BPC (2<<5) -#define TRANS_MSA_12_BPC (3<<5) -#define TRANS_MSA_16_BPC (4<<5) - -/* LCPLL Control */ -#define LCPLL_CTL 0x130040 -#define LCPLL_PLL_DISABLE (1<<31) -#define LCPLL_PLL_LOCK (1<<30) -#define LCPLL_CLK_FREQ_MASK (3<<26) -#define LCPLL_CLK_FREQ_450 (0<<26) -#define LCPLL_CD_CLOCK_DISABLE (1<<25) -#define LCPLL_CD2X_CLOCK_DISABLE (1<<23) -#define LCPLL_CD_SOURCE_FCLK (1<<21) - -/* Pipe WM_LINETIME - watermark line time */ -#define PIPE_WM_LINETIME_A 0x45270 -#define PIPE_WM_LINETIME_B 0x45274 -#define PIPE_WM_LINETIME(pipe) _PIPE(pipe, PIPE_WM_LINETIME_A, \ - PIPE_WM_LINETIME_B) -#define PIPE_WM_LINETIME_MASK (0x1ff) -#define PIPE_WM_LINETIME_TIME(x) ((x)) -#define PIPE_WM_LINETIME_IPS_LINETIME_MASK (0x1ff<<16) -#define PIPE_WM_LINETIME_IPS_LINETIME(x) ((x)<<16) - -/* SFUSE_STRAP */ -#define SFUSE_STRAP 0xc2014 -#define SFUSE_STRAP_DDIB_DETECTED (1<<2) -#define SFUSE_STRAP_DDIC_DETECTED (1<<1) -#define SFUSE_STRAP_DDID_DETECTED (1<<0) - -#define WM_MISC 0x45260 -#define WM_MISC_DATA_PARTITION_5_6 (1 << 0) - -#define WM_DBG 0x45280 -#define WM_DBG_DISALLOW_MULTIPLE_LP (1<<0) -#define WM_DBG_DISALLOW_MAXFIFO (1<<1) -#define WM_DBG_DISALLOW_SPRITE (1<<2) - -/* pipe CSC */ -#define _PIPE_A_CSC_COEFF_RY_GY 0x49010 -#define _PIPE_A_CSC_COEFF_BY 0x49014 -#define _PIPE_A_CSC_COEFF_RU_GU 0x49018 -#define _PIPE_A_CSC_COEFF_BU 0x4901c -#define _PIPE_A_CSC_COEFF_RV_GV 0x49020 -#define _PIPE_A_CSC_COEFF_BV 0x49024 -#define _PIPE_A_CSC_MODE 0x49028 -#define CSC_BLACK_SCREEN_OFFSET (1 << 2) -#define CSC_POSITION_BEFORE_GAMMA (1 << 1) -#define CSC_MODE_YUV_TO_RGB (1 << 0) -#define _PIPE_A_CSC_PREOFF_HI 0x49030 -#define _PIPE_A_CSC_PREOFF_ME 0x49034 -#define _PIPE_A_CSC_PREOFF_LO 0x49038 -#define _PIPE_A_CSC_POSTOFF_HI 0x49040 -#define _PIPE_A_CSC_POSTOFF_ME 0x49044 -#define _PIPE_A_CSC_POSTOFF_LO 0x49048 - -#define _PIPE_B_CSC_COEFF_RY_GY 0x49110 -#define _PIPE_B_CSC_COEFF_BY 0x49114 -#define _PIPE_B_CSC_COEFF_RU_GU 0x49118 -#define _PIPE_B_CSC_COEFF_BU 0x4911c -#define _PIPE_B_CSC_COEFF_RV_GV 0x49120 -#define _PIPE_B_CSC_COEFF_BV 0x49124 -#define _PIPE_B_CSC_MODE 0x49128 -#define _PIPE_B_CSC_PREOFF_HI 0x49130 -#define _PIPE_B_CSC_PREOFF_ME 0x49134 -#define _PIPE_B_CSC_PREOFF_LO 0x49138 -#define _PIPE_B_CSC_POSTOFF_HI 0x49140 -#define _PIPE_B_CSC_POSTOFF_ME 0x49144 -#define _PIPE_B_CSC_POSTOFF_LO 0x49148 - -#define PIPE_CSC_COEFF_RY_GY(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_RY_GY, _PIPE_B_CSC_COEFF_RY_GY) -#define PIPE_CSC_COEFF_BY(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_BY, _PIPE_B_CSC_COEFF_BY) -#define PIPE_CSC_COEFF_RU_GU(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_RU_GU, _PIPE_B_CSC_COEFF_RU_GU) -#define PIPE_CSC_COEFF_BU(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_BU, _PIPE_B_CSC_COEFF_BU) -#define PIPE_CSC_COEFF_RV_GV(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_RV_GV, _PIPE_B_CSC_COEFF_RV_GV) -#define PIPE_CSC_COEFF_BV(pipe) _PIPE(pipe, _PIPE_A_CSC_COEFF_BV, _PIPE_B_CSC_COEFF_BV) -#define PIPE_CSC_MODE(pipe) _PIPE(pipe, _PIPE_A_CSC_MODE, _PIPE_B_CSC_MODE) -#define PIPE_CSC_PREOFF_HI(pipe) _PIPE(pipe, _PIPE_A_CSC_PREOFF_HI, _PIPE_B_CSC_PREOFF_HI) -#define PIPE_CSC_PREOFF_ME(pipe) _PIPE(pipe, _PIPE_A_CSC_PREOFF_ME, _PIPE_B_CSC_PREOFF_ME) -#define PIPE_CSC_PREOFF_LO(pipe) _PIPE(pipe, _PIPE_A_CSC_PREOFF_LO, _PIPE_B_CSC_PREOFF_LO) -#define PIPE_CSC_POSTOFF_HI(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_HI, _PIPE_B_CSC_POSTOFF_HI) -#define PIPE_CSC_POSTOFF_ME(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_ME, _PIPE_B_CSC_POSTOFF_ME) -#define PIPE_CSC_POSTOFF_LO(pipe) _PIPE(pipe, _PIPE_A_CSC_POSTOFF_LO, _PIPE_B_CSC_POSTOFF_LO) +#define GEN7_SO_WRITE_OFFSET(n) _MMIO(0x5280 + (n) * 4) + +#define GEN9_TIMESTAMP_OVERRIDE _MMIO(0x44074) +#define GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_SHIFT 0 +#define GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DIVIDER_MASK 0x3ff +#define GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_SHIFT 12 +#define GEN9_TIMESTAMP_OVERRIDE_US_COUNTER_DENOMINATOR_MASK (0xf << 12) + +#define GGC _MMIO(0x108040) +#define GMS_MASK REG_GENMASK(15, 8) +#define GGMS_MASK REG_GENMASK(7, 6) + +#define GEN6_GSMBASE _MMIO(0x108100) +#define GEN6_DSMBASE _MMIO(0x1080C0) +#define GEN6_BDSM_MASK REG_GENMASK64(31, 20) +#define GEN11_BDSM_MASK REG_GENMASK64(63, 20) + +#define XEHP_CLOCK_GATE_DIS _MMIO(0x101014) +#define SGSI_SIDECLK_DIS REG_BIT(17) +#define SGGI_DIS REG_BIT(15) +#define SGR_DIS REG_BIT(13) + +#define PRIMARY_SPI_TRIGGER _MMIO(0x102040) +#define PRIMARY_SPI_ADDRESS _MMIO(0x102080) +#define PRIMARY_SPI_REGIONID _MMIO(0x102084) +#define SPI_STATIC_REGIONS _MMIO(0x102090) +#define OPTIONROM_SPI_REGIONID_MASK REG_GENMASK(7, 0) +#define OROM_OFFSET _MMIO(0x1020c0) +#define OROM_OFFSET_MASK REG_GENMASK(20, 16) + +#define MTL_MEM_SS_INFO_GLOBAL _MMIO(0x45700) +#define XE3P_ECC_IMPACTING_DE REG_BIT(12) +#define MTL_N_OF_ENABLED_QGV_POINTS_MASK REG_GENMASK(11, 8) +#define MTL_N_OF_POPULATED_CH_MASK REG_GENMASK(7, 4) +#define MTL_DDR_TYPE_MASK REG_GENMASK(3, 0) + +#define MTL_MEDIA_GSI_BASE 0x380000 #endif /* _I915_REG_H_ */ |