diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_sideband.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_sideband.c | 228 |
1 files changed, 0 insertions, 228 deletions
diff --git a/drivers/gpu/drm/i915/intel_sideband.c b/drivers/gpu/drm/i915/intel_sideband.c index 59ef67216c15..1d30273b35c1 100644 --- a/drivers/gpu/drm/i915/intel_sideband.c +++ b/drivers/gpu/drm/i915/intel_sideband.c @@ -90,231 +90,3 @@ void intel_sbi_write(struct drm_i915_private *i915, u16 reg, u32 value, { intel_sbi_rw(i915, reg, destination, &value, false); } - -static int gen6_check_mailbox_status(u32 mbox) -{ - switch (mbox & GEN6_PCODE_ERROR_MASK) { - case GEN6_PCODE_SUCCESS: - return 0; - case GEN6_PCODE_UNIMPLEMENTED_CMD: - return -ENODEV; - case GEN6_PCODE_ILLEGAL_CMD: - return -ENXIO; - case GEN6_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE: - case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE: - return -EOVERFLOW; - case GEN6_PCODE_TIMEOUT: - return -ETIMEDOUT; - default: - MISSING_CASE(mbox & GEN6_PCODE_ERROR_MASK); - return 0; - } -} - -static int gen7_check_mailbox_status(u32 mbox) -{ - switch (mbox & GEN6_PCODE_ERROR_MASK) { - case GEN6_PCODE_SUCCESS: - return 0; - case GEN6_PCODE_ILLEGAL_CMD: - return -ENXIO; - case GEN7_PCODE_TIMEOUT: - return -ETIMEDOUT; - case GEN7_PCODE_ILLEGAL_DATA: - return -EINVAL; - case GEN11_PCODE_ILLEGAL_SUBCOMMAND: - return -ENXIO; - case GEN11_PCODE_LOCKED: - return -EBUSY; - case GEN11_PCODE_REJECTED: - return -EACCES; - case GEN7_PCODE_MIN_FREQ_TABLE_GT_RATIO_OUT_OF_RANGE: - return -EOVERFLOW; - default: - MISSING_CASE(mbox & GEN6_PCODE_ERROR_MASK); - return 0; - } -} - -static int __sandybridge_pcode_rw(struct drm_i915_private *i915, - u32 mbox, u32 *val, u32 *val1, - int fast_timeout_us, - int slow_timeout_ms, - bool is_read) -{ - struct intel_uncore *uncore = &i915->uncore; - - lockdep_assert_held(&i915->sb_lock); - - /* - * GEN6_PCODE_* are outside of the forcewake domain, we can use - * intel_uncore_read/write_fw variants to reduce the amount of work - * required when reading/writing. - */ - - if (intel_uncore_read_fw(uncore, GEN6_PCODE_MAILBOX) & GEN6_PCODE_READY) - return -EAGAIN; - - intel_uncore_write_fw(uncore, GEN6_PCODE_DATA, *val); - intel_uncore_write_fw(uncore, GEN6_PCODE_DATA1, val1 ? *val1 : 0); - intel_uncore_write_fw(uncore, - GEN6_PCODE_MAILBOX, GEN6_PCODE_READY | mbox); - - if (__intel_wait_for_register_fw(uncore, - GEN6_PCODE_MAILBOX, - GEN6_PCODE_READY, 0, - fast_timeout_us, - slow_timeout_ms, - &mbox)) - return -ETIMEDOUT; - - if (is_read) - *val = intel_uncore_read_fw(uncore, GEN6_PCODE_DATA); - if (is_read && val1) - *val1 = intel_uncore_read_fw(uncore, GEN6_PCODE_DATA1); - - if (GRAPHICS_VER(i915) > 6) - return gen7_check_mailbox_status(mbox); - else - return gen6_check_mailbox_status(mbox); -} - -int sandybridge_pcode_read(struct drm_i915_private *i915, u32 mbox, - u32 *val, u32 *val1) -{ - int err; - - mutex_lock(&i915->sb_lock); - err = __sandybridge_pcode_rw(i915, mbox, val, val1, - 500, 20, - true); - mutex_unlock(&i915->sb_lock); - - if (err) { - drm_dbg(&i915->drm, - "warning: pcode (read from mbox %x) mailbox access failed for %ps: %d\n", - mbox, __builtin_return_address(0), err); - } - - return err; -} - -int sandybridge_pcode_write_timeout(struct drm_i915_private *i915, - u32 mbox, u32 val, - int fast_timeout_us, - int slow_timeout_ms) -{ - int err; - - mutex_lock(&i915->sb_lock); - err = __sandybridge_pcode_rw(i915, mbox, &val, NULL, - fast_timeout_us, slow_timeout_ms, - false); - mutex_unlock(&i915->sb_lock); - - if (err) { - drm_dbg(&i915->drm, - "warning: pcode (write of 0x%08x to mbox %x) mailbox access failed for %ps: %d\n", - val, mbox, __builtin_return_address(0), err); - } - - return err; -} - -static bool skl_pcode_try_request(struct drm_i915_private *i915, u32 mbox, - u32 request, u32 reply_mask, u32 reply, - u32 *status) -{ - *status = __sandybridge_pcode_rw(i915, mbox, &request, NULL, - 500, 0, - true); - - return *status || ((request & reply_mask) == reply); -} - -/** - * skl_pcode_request - send PCODE request until acknowledgment - * @i915: device private - * @mbox: PCODE mailbox ID the request is targeted for - * @request: request ID - * @reply_mask: mask used to check for request acknowledgment - * @reply: value used to check for request acknowledgment - * @timeout_base_ms: timeout for polling with preemption enabled - * - * Keep resending the @request to @mbox until PCODE acknowledges it, PCODE - * reports an error or an overall timeout of @timeout_base_ms+50 ms expires. - * The request is acknowledged once the PCODE reply dword equals @reply after - * applying @reply_mask. Polling is first attempted with preemption enabled - * for @timeout_base_ms and if this times out for another 50 ms with - * preemption disabled. - * - * Returns 0 on success, %-ETIMEDOUT in case of a timeout, <0 in case of some - * other error as reported by PCODE. - */ -int skl_pcode_request(struct drm_i915_private *i915, u32 mbox, u32 request, - u32 reply_mask, u32 reply, int timeout_base_ms) -{ - u32 status; - int ret; - - mutex_lock(&i915->sb_lock); - -#define COND \ - skl_pcode_try_request(i915, mbox, request, reply_mask, reply, &status) - - /* - * Prime the PCODE by doing a request first. Normally it guarantees - * that a subsequent request, at most @timeout_base_ms later, succeeds. - * _wait_for() doesn't guarantee when its passed condition is evaluated - * first, so send the first request explicitly. - */ - if (COND) { - ret = 0; - goto out; - } - ret = _wait_for(COND, timeout_base_ms * 1000, 10, 10); - if (!ret) - goto out; - - /* - * The above can time out if the number of requests was low (2 in the - * worst case) _and_ PCODE was busy for some reason even after a - * (queued) request and @timeout_base_ms delay. As a workaround retry - * the poll with preemption disabled to maximize the number of - * requests. Increase the timeout from @timeout_base_ms to 50ms to - * account for interrupts that could reduce the number of these - * requests, and for any quirks of the PCODE firmware that delays - * the request completion. - */ - drm_dbg_kms(&i915->drm, - "PCODE timeout, retrying with preemption disabled\n"); - drm_WARN_ON_ONCE(&i915->drm, timeout_base_ms > 3); - preempt_disable(); - ret = wait_for_atomic(COND, 50); - preempt_enable(); - -out: - mutex_unlock(&i915->sb_lock); - return ret ? ret : status; -#undef COND -} - -int intel_pcode_init(struct drm_i915_private *i915) -{ - int ret = 0; - - if (!IS_DGFX(i915)) - return ret; - - ret = skl_pcode_request(i915, DG1_PCODE_STATUS, - DG1_UNCORE_GET_INIT_STATUS, - DG1_UNCORE_INIT_STATUS_COMPLETE, - DG1_UNCORE_INIT_STATUS_COMPLETE, 180000); - - drm_dbg(&i915->drm, "PCODE init status %d\n", ret); - - if (ret) - drm_err(&i915->drm, "Pcode did not report uncore initialization completion!\n"); - - return ret; -} |