diff options
Diffstat (limited to 'drivers/gpu/drm/panel/panel-himax-hx8394.c')
| -rw-r--r-- | drivers/gpu/drm/panel/panel-himax-hx8394.c | 845 |
1 files changed, 845 insertions, 0 deletions
diff --git a/drivers/gpu/drm/panel/panel-himax-hx8394.c b/drivers/gpu/drm/panel/panel-himax-hx8394.c new file mode 100644 index 000000000000..c4d3e09a228d --- /dev/null +++ b/drivers/gpu/drm/panel/panel-himax-hx8394.c @@ -0,0 +1,845 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for panels based on Himax HX8394 controller, such as: + * + * - HannStar HSD060BHW4 5.99" MIPI-DSI panel + * + * Copyright (C) 2021 Kamil Trzciński + * + * Based on drivers/gpu/drm/panel/panel-sitronix-st7703.c + * Copyright (C) Purism SPC 2019 + */ + +#include <linux/delay.h> +#include <linux/gpio/consumer.h> +#include <linux/media-bus-format.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/regulator/consumer.h> + +#include <video/mipi_display.h> + +#include <drm/drm_mipi_dsi.h> +#include <drm/drm_modes.h> +#include <drm/drm_panel.h> + +#define DRV_NAME "panel-himax-hx8394" + +/* Manufacturer specific commands sent via DSI, listed in HX8394-F datasheet */ +#define HX8394_CMD_SETSEQUENCE 0xb0 +#define HX8394_CMD_SETPOWER 0xb1 +#define HX8394_CMD_SETDISP 0xb2 +#define HX8394_CMD_SETCYC 0xb4 +#define HX8394_CMD_SETVCOM 0xb6 +#define HX8394_CMD_SETTE 0xb7 +#define HX8394_CMD_SETSENSOR 0xb8 +#define HX8394_CMD_SETEXTC 0xb9 +#define HX8394_CMD_SETMIPI 0xba +#define HX8394_CMD_SETOTP 0xbb +#define HX8394_CMD_SETREGBANK 0xbd +#define HX8394_CMD_UNKNOWN5 0xbf +#define HX8394_CMD_UNKNOWN1 0xc0 +#define HX8394_CMD_SETDGCLUT 0xc1 +#define HX8394_CMD_SETID 0xc3 +#define HX8394_CMD_SETDDB 0xc4 +#define HX8394_CMD_UNKNOWN2 0xc6 +#define HX8394_CMD_SETCABC 0xc9 +#define HX8394_CMD_SETCABCGAIN 0xca +#define HX8394_CMD_SETPANEL 0xcc +#define HX8394_CMD_SETOFFSET 0xd2 +#define HX8394_CMD_SETGIP0 0xd3 +#define HX8394_CMD_UNKNOWN3 0xd4 +#define HX8394_CMD_SETGIP1 0xd5 +#define HX8394_CMD_SETGIP2 0xd6 +#define HX8394_CMD_SETGPO 0xd6 +#define HX8394_CMD_UNKNOWN4 0xd8 +#define HX8394_CMD_SETSCALING 0xdd +#define HX8394_CMD_SETIDLE 0xdf +#define HX8394_CMD_SETGAMMA 0xe0 +#define HX8394_CMD_SETCHEMODE_DYN 0xe4 +#define HX8394_CMD_SETCHE 0xe5 +#define HX8394_CMD_SETCESEL 0xe6 +#define HX8394_CMD_SET_SP_CMD 0xe9 +#define HX8394_CMD_SETREADINDEX 0xfe +#define HX8394_CMD_GETSPIREAD 0xff + +struct hx8394 { + struct device *dev; + struct drm_panel panel; + struct gpio_desc *reset_gpio; + struct regulator *vcc; + struct regulator *iovcc; + enum drm_panel_orientation orientation; + + const struct hx8394_panel_desc *desc; +}; + +struct hx8394_panel_desc { + const struct drm_display_mode *mode; + unsigned int lanes; + unsigned long mode_flags; + enum mipi_dsi_pixel_format format; + void (*init_sequence)(struct mipi_dsi_multi_context *dsi_ctx); +}; + +static inline struct hx8394 *panel_to_hx8394(struct drm_panel *panel) +{ + return container_of(panel, struct hx8394, panel); +} + +static void hsd060bhw4_init_sequence(struct mipi_dsi_multi_context *dsi_ctx) +{ + /* 5.19.8 SETEXTC: Set extension command (B9h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETEXTC, + 0xff, 0x83, 0x94); + + /* 5.19.2 SETPOWER: Set power (B1h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPOWER, + 0x48, 0x11, 0x71, 0x09, 0x32, 0x24, 0x71, 0x31, 0x55, 0x30); + + /* 5.19.9 SETMIPI: Set MIPI control (BAh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETMIPI, + 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0); + + /* 5.19.3 SETDISP: Set display related register (B2h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETDISP, + 0x00, 0x80, 0x78, 0x0c, 0x07); + + /* 5.19.4 SETCYC: Set display waveform cycles (B4h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETCYC, + 0x12, 0x63, 0x12, 0x63, 0x12, 0x63, 0x01, 0x0c, 0x7c, 0x55, + 0x00, 0x3f, 0x12, 0x6b, 0x12, 0x6b, 0x12, 0x6b, 0x01, 0x0c, + 0x7c); + + /* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP0, + 0x00, 0x00, 0x00, 0x00, 0x3c, 0x1c, 0x00, 0x00, 0x32, 0x10, + 0x09, 0x00, 0x09, 0x32, 0x15, 0xad, 0x05, 0xad, 0x32, 0x00, + 0x00, 0x00, 0x00, 0x37, 0x03, 0x0b, 0x0b, 0x37, 0x00, 0x00, + 0x00, 0x0c, 0x40); + + /* 5.19.20 Set GIP Option1 (D5h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP1, + 0x19, 0x19, 0x18, 0x18, 0x1b, 0x1b, 0x1a, 0x1a, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x20, 0x21, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x24, 0x25, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18); + + /* 5.19.21 Set GIP Option2 (D6h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP2, + 0x18, 0x18, 0x19, 0x19, 0x1b, 0x1b, 0x1a, 0x1a, 0x07, 0x06, + 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x25, 0x24, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x21, 0x20, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18); + + /* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGAMMA, + 0x00, 0x04, 0x0c, 0x12, 0x14, 0x18, 0x1a, 0x18, 0x31, 0x3f, + 0x4d, 0x4c, 0x54, 0x65, 0x6b, 0x70, 0x7f, 0x82, 0x7e, 0x8a, + 0x99, 0x4a, 0x48, 0x49, 0x4b, 0x4a, 0x4c, 0x4b, 0x7f, 0x00, + 0x04, 0x0c, 0x11, 0x13, 0x17, 0x1a, 0x18, 0x31, + 0x3f, 0x4d, 0x4c, 0x54, 0x65, 0x6b, 0x70, 0x7f, + 0x82, 0x7e, 0x8a, 0x99, 0x4a, 0x48, 0x49, 0x4b, + 0x4a, 0x4c, 0x4b, 0x7f); + + /* 5.19.17 SETPANEL (CCh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPANEL, + 0x0b); + + /* Unknown command, not listed in the HX8394-F datasheet */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN1, + 0x1f, 0x31); + + /* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETVCOM, + 0x7d, 0x7d); + + /* Unknown command, not listed in the HX8394-F datasheet */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN3, + 0x02); + + /* 5.19.11 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x01); + + /* 5.19.2 SETPOWER: Set power (B1h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPOWER, + 0x00); + + /* 5.19.11 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x00); + + /* Unknown command, not listed in the HX8394-F datasheet */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN3, + 0xed); +} + +static const struct drm_display_mode hsd060bhw4_mode = { + .hdisplay = 720, + .hsync_start = 720 + 40, + .hsync_end = 720 + 40 + 46, + .htotal = 720 + 40 + 46 + 40, + .vdisplay = 1440, + .vsync_start = 1440 + 9, + .vsync_end = 1440 + 9 + 7, + .vtotal = 1440 + 9 + 7 + 7, + .clock = 74250, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 68, + .height_mm = 136, +}; + +static const struct hx8394_panel_desc hsd060bhw4_desc = { + .mode = &hsd060bhw4_mode, + .lanes = 4, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST, + .format = MIPI_DSI_FMT_RGB888, + .init_sequence = hsd060bhw4_init_sequence, +}; + +static void powkiddy_x55_init_sequence(struct mipi_dsi_multi_context *dsi_ctx) +{ + /* 5.19.8 SETEXTC: Set extension command (B9h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETEXTC, + 0xff, 0x83, 0x94); + + /* 5.19.9 SETMIPI: Set MIPI control (BAh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETMIPI, + 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0); + + /* 5.19.2 SETPOWER: Set power (B1h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPOWER, + 0x48, 0x12, 0x72, 0x09, 0x32, 0x54, 0x71, 0x71, 0x57, 0x47); + + /* 5.19.3 SETDISP: Set display related register (B2h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETDISP, + 0x00, 0x80, 0x64, 0x2c, 0x16, 0x2f); + + /* 5.19.4 SETCYC: Set display waveform cycles (B4h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETCYC, + 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, 0x86, 0x75, + 0x00, 0x3f, 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, 0x01, 0x0c, + 0x86); + + /* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETVCOM, + 0x6e, 0x6e); + + /* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP0, + 0x00, 0x00, 0x07, 0x07, 0x40, 0x07, 0x0c, 0x00, 0x08, 0x10, + 0x08, 0x00, 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, 0x02, 0x15, + 0x06, 0x05, 0x06, 0x47, 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07, + 0x07, 0x0c, 0x40); + + /* 5.19.20 Set GIP Option1 (D5h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP1, + 0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, + 0x06, 0x07, 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, 0x18, 0x18, + 0x26, 0x27, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x20, 0x21, + 0x18, 0x18, 0x18, 0x18); + + /* 5.19.21 Set GIP Option2 (D6h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP2, + 0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02, + 0x01, 0x00, 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, 0x18, 0x18, + 0x27, 0x26, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, 0x25, 0x24, + 0x18, 0x18, 0x18, 0x18); + + /* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGAMMA, + 0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, + 0x65, 0x66, 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, 0x98, 0xa8, + 0xb9, 0x5d, 0x5c, 0x61, 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00, + 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, 0x22, 0x47, 0x56, 0x65, + 0x65, 0x6e, 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, 0xa8, 0xba, + 0x5d, 0x5d, 0x62, 0x67, 0x6b, 0x72, 0x7f, 0x7f); + + /* Unknown command, not listed in the HX8394-F datasheet */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN1, + 0x1f, 0x31); + + /* 5.19.17 SETPANEL (CCh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPANEL, + 0x0b); + + /* Unknown command, not listed in the HX8394-F datasheet */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN3, + 0x02); + + /* 5.19.11 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x02); + + /* Unknown command, not listed in the HX8394-F datasheet */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN4, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff); + + /* 5.19.11 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x00); + + /* 5.19.11 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x01); + + /* 5.19.2 SETPOWER: Set power (B1h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPOWER, + 0x00); + + /* 5.19.11 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x00); + + /* Unknown command, not listed in the HX8394-F datasheet */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN5, + 0x40, 0x81, 0x50, 0x00, 0x1a, 0xfc, 0x01); + + /* Unknown command, not listed in the HX8394-F datasheet */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN2, + 0xed); +} + +static const struct drm_display_mode powkiddy_x55_mode = { + .hdisplay = 720, + .hsync_start = 720 + 44, + .hsync_end = 720 + 44 + 20, + .htotal = 720 + 44 + 20 + 20, + .vdisplay = 1280, + .vsync_start = 1280 + 12, + .vsync_end = 1280 + 12 + 10, + .vtotal = 1280 + 12 + 10 + 10, + .clock = 63290, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 67, + .height_mm = 121, +}; + +static const struct hx8394_panel_desc powkiddy_x55_desc = { + .mode = &powkiddy_x55_mode, + .lanes = 4, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST | + MIPI_DSI_MODE_LPM | MIPI_DSI_MODE_NO_EOT_PACKET, + .format = MIPI_DSI_FMT_RGB888, + .init_sequence = powkiddy_x55_init_sequence, +}; + +static void mchp_ac40t08a_init_sequence(struct mipi_dsi_multi_context *dsi_ctx) +{ + /* DCS commands do not seem to be sent correclty without this delay */ + mipi_dsi_msleep(dsi_ctx, 20); + + /* 5.19.8 SETEXTC: Set extension command (B9h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETEXTC, + 0xff, 0x83, 0x94); + + /* 5.19.9 SETMIPI: Set MIPI control (BAh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETMIPI, + 0x63, 0x03, 0x68, 0x6b, 0xb2, 0xc0); + + /* 5.19.2 SETPOWER: Set power (B1h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPOWER, + 0x48, 0x12, 0x72, 0x09, 0x32, 0x54, + 0x71, 0x71, 0x57, 0x47); + + /* 5.19.3 SETDISP: Set display related register (B2h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETDISP, + 0x00, 0x80, 0x64, 0x0c, 0x0d, 0x2f); + + /* 5.19.4 SETCYC: Set display waveform cycles (B4h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETCYC, + 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, + 0x01, 0x0c, 0x86, 0x75, 0x00, 0x3f, + 0x73, 0x74, 0x73, 0x74, 0x73, 0x74, + 0x01, 0x0c, 0x86); + + /* 5.19.5 SETVCOM: Set VCOM voltage (B6h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETVCOM, + 0x6e, 0x6e); + + /* 5.19.19 SETGIP0: Set GIP Option0 (D3h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP0, + 0x00, 0x00, 0x07, 0x07, 0x40, 0x07, + 0x0c, 0x00, 0x08, 0x10, 0x08, 0x00, + 0x08, 0x54, 0x15, 0x0a, 0x05, 0x0a, + 0x02, 0x15, 0x06, 0x05, 0x06, 0x47, + 0x44, 0x0a, 0x0a, 0x4b, 0x10, 0x07, + 0x07, 0x0c, 0x40); + + /* 5.19.20 Set GIP Option1 (D5h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP1, + 0x1c, 0x1c, 0x1d, 0x1d, 0x00, 0x01, + 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + 0x08, 0x09, 0x0a, 0x0b, 0x24, 0x25, + 0x18, 0x18, 0x26, 0x27, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x20, 0x21, 0x18, 0x18, + 0x18, 0x18); + + /* 5.19.21 Set GIP Option2 (D6h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP2, + 0x1c, 0x1c, 0x1d, 0x1d, 0x07, 0x06, + 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, + 0x0b, 0x0a, 0x09, 0x08, 0x21, 0x20, + 0x18, 0x18, 0x27, 0x26, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x18, 0x18, + 0x18, 0x18, 0x25, 0x24, 0x18, 0x18, + 0x18, 0x18); + + /* 5.19.25 SETGAMMA: Set gamma curve related setting (E0h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGAMMA, + 0x00, 0x0a, 0x15, 0x1b, 0x1e, 0x21, + 0x24, 0x22, 0x47, 0x56, 0x65, 0x66, + 0x6e, 0x82, 0x88, 0x8b, 0x9a, 0x9d, + 0x98, 0xa8, 0xb9, 0x5d, 0x5c, 0x61, + 0x66, 0x6a, 0x6f, 0x7f, 0x7f, 0x00, + 0x0a, 0x15, 0x1b, 0x1e, 0x21, 0x24, + 0x22, 0x47, 0x56, 0x65, 0x65, 0x6e, + 0x81, 0x87, 0x8b, 0x98, 0x9d, 0x99, + 0xa8, 0xba, 0x5d, 0x5d, 0x62, 0x67, + 0x6b, 0x72, 0x7f, 0x7f); + + /* Unknown command, not listed in the HX8394-F datasheet (C0H) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN1, + 0x1f, 0x73); + + /* Set CABC control (C9h)*/ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETCABC, + 0x76, 0x00, 0x30); + + /* 5.19.17 SETPANEL (CCh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPANEL, + 0x0b); + + /* Unknown command, not listed in the HX8394-F datasheet (D4h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN3, + 0x02); + + /* 5.19.11 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x02); + + /* 5.19.11 Set register bank (D8h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN4, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, + 0xff, 0xff, 0xff, 0xff, 0xff, 0xff); + + /* 5.19.11 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x00); + + /* 5.19.11 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x01); + + /* 5.19.2 SETPOWER: Set power (B1h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPOWER, + 0x00); + + /* 5.19.11 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x00); + + /* Unknown command, not listed in the HX8394-F datasheet (C6h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN2, + 0xed); +} + +static const struct drm_display_mode mchp_ac40t08a_mode = { + .hdisplay = 720, + .hsync_start = 720 + 12, + .hsync_end = 720 + 12 + 24, + .htotal = 720 + 12 + 12 + 24, + .vdisplay = 1280, + .vsync_start = 1280 + 13, + .vsync_end = 1280 + 14, + .vtotal = 1280 + 14 + 13, + .clock = 60226, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 76, + .height_mm = 132, +}; + +static const struct hx8394_panel_desc mchp_ac40t08a_desc = { + .mode = &mchp_ac40t08a_mode, + .lanes = 4, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST, + .format = MIPI_DSI_FMT_RGB888, + .init_sequence = mchp_ac40t08a_init_sequence, +}; + +/* + * HL055FHAV028C is based on Himax HX8399, so datasheet pages are + * slightly different than HX8394 based panels. + */ +static void hl055fhav028c_init_sequence(struct mipi_dsi_multi_context *dsi_ctx) +{ + /* 6.3.6 SETEXTC: Set extension command (B9h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETEXTC, + 0xff, 0x83, 0x99); + + /* 6.3.17 SETOFFSET: Set offset voltage (D2h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETOFFSET, + 0x77); + + /* 6.3.1 SETPOWER: Set power (B1h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPOWER, + 0x02, 0x04, 0x74, 0x94, 0x01, 0x32, + 0x33, 0x11, 0x11, 0xab, 0x4d, 0x56, + 0x73, 0x02, 0x02); + + /* 6.3.2 SETDISP: Set display related register (B2h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETDISP, + 0x00, 0x80, 0x80, 0xae, 0x05, 0x07, + 0x5a, 0x11, 0x00, 0x00, 0x10, 0x1e, + 0x70, 0x03, 0xd4); + + /* 6.3.3 SETCYC: Set display waveform cycles (B4h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETCYC, + 0x00, 0xff, 0x02, 0xc0, 0x02, 0xc0, + 0x00, 0x00, 0x08, 0x00, 0x04, 0x06, + 0x00, 0x32, 0x04, 0x0a, 0x08, 0x21, + 0x03, 0x01, 0x00, 0x0f, 0xb8, 0x8b, + 0x02, 0xc0, 0x02, 0xc0, 0x00, 0x00, + 0x08, 0x00, 0x04, 0x06, 0x00, 0x32, + 0x04, 0x0a, 0x08, 0x01, 0x00, 0x0f, + 0xb8, 0x01); + + /* 6.3.18 SETGIP0: Set GIP Option0 (D3h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP0, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x06, 0x00, 0x00, 0x10, 0x04, 0x00, + 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x00, 0x05, 0x05, 0x07, 0x00, 0x00, + 0x00, 0x05, 0x40); + + /* 6.3.19 Set GIP Option1 (D5h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP1, + 0x18, 0x18, 0x19, 0x19, 0x18, 0x18, + 0x21, 0x20, 0x01, 0x00, 0x07, 0x06, + 0x05, 0x04, 0x03, 0x02, 0x18, 0x18, + 0x18, 0x18, 0x18, 0x18, 0x2f, 0x2f, + 0x30, 0x30, 0x31, 0x31, 0x18, 0x18, + 0x18, 0x18); + + /* 6.3.20 Set GIP Option2 (D6h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGIP2, + 0x18, 0x18, 0x19, 0x19, 0x40, 0x40, + 0x20, 0x21, 0x02, 0x03, 0x04, 0x05, + 0x06, 0x07, 0x00, 0x01, 0x40, 0x40, + 0x40, 0x40, 0x40, 0x40, 0x2f, 0x2f, + 0x30, 0x30, 0x31, 0x31, 0x40, 0x40, + 0x40, 0x40); + + /* 6.3.21 Set GIP Option3 (D8h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN4, + 0xa2, 0xaa, 0x02, 0xa0, 0xa2, 0xa8, + 0x02, 0xa0, 0xb0, 0x00, 0x00, 0x00, + 0xb0, 0x00, 0x00, 0x00); + + /* 6.3.9 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x01); + + /* 6.3.21 Set GIP Option3 (D8h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN4, + 0xb0, 0x00, 0x00, 0x00, 0xb0, 0x00, + 0x00, 0x00, 0xe2, 0xaa, 0x03, 0xf0, + 0xe2, 0xaa, 0x03, 0xf0); + + /* 6.3.9 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x02); + + /* 6.3.21 Set GIP Option3 (D8h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN4, + 0xe2, 0xaa, 0x03, 0xf0, 0xe2, 0xaa, + 0x03, 0xf0); + + /* 6.3.9 Set register bank (BDh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETREGBANK, + 0x00); + + /* 6.3.4 SETVCOM: Set VCOM voltage (B6h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETVCOM, + 0x7a, 0x7a); + + /* 6.3.26 SETGAMMA: Set gamma curve related setting (E0h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETGAMMA, + 0x00, 0x18, 0x27, 0x24, 0x5a, 0x68, + 0x79, 0x78, 0x81, 0x8a, 0x92, 0x99, + 0x9e, 0xa7, 0xaf, 0xb4, 0xb9, 0xc3, + 0xc7, 0xd1, 0xc6, 0xd4, 0xd5, 0x6c, + 0x67, 0x71, 0x77, 0x00, 0x00, 0x18, + 0x27, 0x24, 0x5a, 0x68, 0x79, 0x78, + 0x81, 0x8a, 0x92, 0x99, 0x9e, 0xa7, + 0xaf, 0xb4, 0xb9, 0xc3, 0xc7, 0xd1, + 0xc6, 0xd4, 0xd5, 0x6c, 0x67, 0x77); + + /* Unknown command, not listed in the HX8399-C datasheet (C6h) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_UNKNOWN2, + 0xff, 0xf9); + + /* 6.3.16 SETPANEL (CCh) */ + mipi_dsi_dcs_write_seq_multi(dsi_ctx, HX8394_CMD_SETPANEL, + 0x08); +} + +static const struct drm_display_mode hl055fhav028c_mode = { + .hdisplay = 1080, + .hsync_start = 1080 + 32, + .hsync_end = 1080 + 32 + 8, + .htotal = 1080 + 32 + 8 + 32, + .vdisplay = 1920, + .vsync_start = 1920 + 16, + .vsync_end = 1920 + 16 + 2, + .vtotal = 1920 + 16 + 2 + 14, + .clock = 134920, + .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, + .width_mm = 70, + .height_mm = 127, +}; + +static const struct hx8394_panel_desc hl055fhav028c_desc = { + .mode = &hl055fhav028c_mode, + .lanes = 4, + .mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST, + .format = MIPI_DSI_FMT_RGB888, + .init_sequence = hl055fhav028c_init_sequence, +}; + +static int hx8394_enable(struct drm_panel *panel) +{ + struct hx8394 *ctx = panel_to_hx8394(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi }; + int ret; + + ctx->desc->init_sequence(&dsi_ctx); + + mipi_dsi_dcs_exit_sleep_mode_multi(&dsi_ctx); + + if (dsi_ctx.accum_err) + return dsi_ctx.accum_err; + /* Panel is operational 120 msec after reset */ + msleep(120); + + mipi_dsi_dcs_set_display_on_multi(&dsi_ctx); + if (dsi_ctx.accum_err) + goto sleep_in; + + return 0; + +sleep_in: + ret = dsi_ctx.accum_err; + dsi_ctx.accum_err = 0; + + /* This will probably fail, but let's try orderly power off anyway. */ + mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx); + mipi_dsi_msleep(&dsi_ctx, 50); + + return ret; +} + +static int hx8394_disable(struct drm_panel *panel) +{ + struct hx8394 *ctx = panel_to_hx8394(panel); + struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev); + struct mipi_dsi_multi_context dsi_ctx = { .dsi = dsi }; + + mipi_dsi_dcs_enter_sleep_mode_multi(&dsi_ctx); + mipi_dsi_msleep(&dsi_ctx, 50); /* about 3 frames */ + + return dsi_ctx.accum_err; +} + +static int hx8394_unprepare(struct drm_panel *panel) +{ + struct hx8394 *ctx = panel_to_hx8394(panel); + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + + regulator_disable(ctx->iovcc); + regulator_disable(ctx->vcc); + + return 0; +} + +static int hx8394_prepare(struct drm_panel *panel) +{ + struct hx8394 *ctx = panel_to_hx8394(panel); + int ret; + + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + + ret = regulator_enable(ctx->vcc); + if (ret) { + dev_err(ctx->dev, "Failed to enable vcc supply: %d\n", ret); + return ret; + } + + ret = regulator_enable(ctx->iovcc); + if (ret) { + dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret); + goto disable_vcc; + } + + gpiod_set_value_cansleep(ctx->reset_gpio, 0); + + msleep(180); + + return 0; + +disable_vcc: + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_disable(ctx->vcc); + return ret; +} + +static int hx8394_get_modes(struct drm_panel *panel, + struct drm_connector *connector) +{ + struct hx8394 *ctx = panel_to_hx8394(panel); + struct drm_display_mode *mode; + + mode = drm_mode_duplicate(connector->dev, ctx->desc->mode); + if (!mode) { + dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n", + ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay, + drm_mode_vrefresh(ctx->desc->mode)); + return -ENOMEM; + } + + drm_mode_set_name(mode); + + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED; + connector->display_info.width_mm = mode->width_mm; + connector->display_info.height_mm = mode->height_mm; + drm_mode_probed_add(connector, mode); + + return 1; +} + +static enum drm_panel_orientation hx8394_get_orientation(struct drm_panel *panel) +{ + struct hx8394 *ctx = panel_to_hx8394(panel); + + return ctx->orientation; +} + +static const struct drm_panel_funcs hx8394_drm_funcs = { + .disable = hx8394_disable, + .unprepare = hx8394_unprepare, + .prepare = hx8394_prepare, + .enable = hx8394_enable, + .get_modes = hx8394_get_modes, + .get_orientation = hx8394_get_orientation, +}; + +static int hx8394_probe(struct mipi_dsi_device *dsi) +{ + struct device *dev = &dsi->dev; + struct hx8394 *ctx; + int ret; + + ctx = devm_drm_panel_alloc(dev, struct hx8394, panel, + &hx8394_drm_funcs, + DRM_MODE_CONNECTOR_DSI); + if (IS_ERR(ctx)) + return PTR_ERR(ctx); + + ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(ctx->reset_gpio)) + return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), + "Failed to get reset gpio\n"); + + ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation); + if (ret < 0) { + dev_err(dev, "%pOF: failed to get orientation %d\n", dev->of_node, ret); + return ret; + } + + mipi_dsi_set_drvdata(dsi, ctx); + + ctx->dev = dev; + ctx->desc = of_device_get_match_data(dev); + + dsi->mode_flags = ctx->desc->mode_flags; + dsi->format = ctx->desc->format; + dsi->lanes = ctx->desc->lanes; + + ctx->vcc = devm_regulator_get(dev, "vcc"); + if (IS_ERR(ctx->vcc)) + return dev_err_probe(dev, PTR_ERR(ctx->vcc), + "Failed to request vcc regulator\n"); + + ctx->iovcc = devm_regulator_get(dev, "iovcc"); + if (IS_ERR(ctx->iovcc)) + return dev_err_probe(dev, PTR_ERR(ctx->iovcc), + "Failed to request iovcc regulator\n"); + + ret = drm_panel_of_backlight(&ctx->panel); + if (ret) + return ret; + + drm_panel_add(&ctx->panel); + + ret = mipi_dsi_attach(dsi); + if (ret < 0) { + dev_err_probe(dev, ret, "mipi_dsi_attach failed\n"); + drm_panel_remove(&ctx->panel); + return ret; + } + + dev_dbg(dev, "%ux%u@%u %ubpp dsi %udl - ready\n", + ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay, + drm_mode_vrefresh(ctx->desc->mode), + mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes); + + return 0; +} + +static void hx8394_remove(struct mipi_dsi_device *dsi) +{ + struct hx8394 *ctx = mipi_dsi_get_drvdata(dsi); + int ret; + + ret = mipi_dsi_detach(dsi); + if (ret < 0) + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret); + + drm_panel_remove(&ctx->panel); +} + +static const struct of_device_id hx8394_of_match[] = { + { .compatible = "hannstar,hsd060bhw4", .data = &hsd060bhw4_desc }, + { .compatible = "huiling,hl055fhav028c", .data = &hl055fhav028c_desc }, + { .compatible = "powkiddy,x55-panel", .data = &powkiddy_x55_desc }, + { .compatible = "microchip,ac40t08a-mipi-panel", .data = &mchp_ac40t08a_desc }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, hx8394_of_match); + +static struct mipi_dsi_driver hx8394_driver = { + .probe = hx8394_probe, + .remove = hx8394_remove, + .driver = { + .name = DRV_NAME, + .of_match_table = hx8394_of_match, + }, +}; +module_mipi_dsi_driver(hx8394_driver); + +MODULE_AUTHOR("Kamil Trzciński <ayufan@ayufan.eu>"); +MODULE_DESCRIPTION("DRM driver for Himax HX8394 based MIPI DSI panels"); +MODULE_LICENSE("GPL"); |