1 files changed, 9 insertions, 26 deletions

diff --git a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
index b4729a94c34a..a0f58c3b73f6 100644
--- a/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
+++ b/drivers/gpu/drm/panel/panel-orisetech-otm8009a.c
@@ -9,6 +9,7 @@
 #include <linux/backlight.h>
 #include <linux/delay.h>
 #include <linux/gpio/consumer.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/regulator/consumer.h>
 
@@ -70,7 +71,6 @@ struct otm8009a {
 	struct gpio_desc *reset_gpio;
 	struct regulator *supply;
 	bool prepared;
-	bool enabled;
 };
 
 static const struct drm_display_mode modes[] = {
@@ -267,9 +267,6 @@ static int otm8009a_disable(struct drm_panel *panel)
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
 	int ret;
 
-	if (!ctx->enabled)
-		return 0; /* This is not an issue so we return 0 here */
-
 	backlight_disable(ctx->bl_dev);
 
 	ret = mipi_dsi_dcs_set_display_off(dsi);
@@ -282,8 +279,6 @@ static int otm8009a_disable(struct drm_panel *panel)
 
 	msleep(120);
 
-	ctx->enabled = false;
-
 	return 0;
 }
 
@@ -291,9 +286,6 @@ static int otm8009a_unprepare(struct drm_panel *panel)
 {
 	struct otm8009a *ctx = panel_to_otm8009a(panel);
 
-	if (!ctx->prepared)
-		return 0;
-
 	if (ctx->reset_gpio) {
 		gpiod_set_value_cansleep(ctx->reset_gpio, 1);
 		msleep(20);
@@ -311,9 +303,6 @@ static int otm8009a_prepare(struct drm_panel *panel)
 	struct otm8009a *ctx = panel_to_otm8009a(panel);
 	int ret;
 
-	if (ctx->prepared)
-		return 0;
-
 	ret = regulator_enable(ctx->supply);
 	if (ret < 0) {
 		dev_err(panel->dev, "failed to enable supply: %d\n", ret);
@@ -341,13 +330,8 @@ static int otm8009a_enable(struct drm_panel *panel)
 {
 	struct otm8009a *ctx = panel_to_otm8009a(panel);
 
-	if (ctx->enabled)
-		return 0;
-
 	backlight_enable(ctx->bl_dev);
 
-	ctx->enabled = true;
-
 	return 0;
 }
 
@@ -406,7 +390,7 @@ static int otm8009a_backlight_update_status(struct backlight_device *bd)
 		return -ENXIO;
 	}
 
-	if (bd->props.power <= FB_BLANK_NORMAL) {
+	if (bd->props.power <= BACKLIGHT_POWER_REDUCED) {
 		/* Power on the backlight with the requested brightness
 		 * Note We can not use mipi_dsi_dcs_set_display_brightness()
 		 * as otm8009a driver support only 8-bit brightness (1 param).
@@ -440,9 +424,11 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 	struct otm8009a *ctx;
 	int ret;
 
-	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
-	if (!ctx)
-		return -ENOMEM;
+	ctx = devm_drm_panel_alloc(dev, struct otm8009a, panel,
+				   &otm8009a_drm_funcs,
+				   DRM_MODE_CONNECTOR_DSI);
+	if (IS_ERR(ctx))
+		return PTR_ERR(ctx);
 
 	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset_gpio)) {
@@ -467,11 +453,8 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 	dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_BURST |
 			  MIPI_DSI_MODE_LPM | MIPI_DSI_CLOCK_NON_CONTINUOUS;
 
-	drm_panel_init(&ctx->panel, dev, &otm8009a_drm_funcs,
-		       DRM_MODE_CONNECTOR_DSI);
-
 	ctx->bl_dev = devm_backlight_device_register(dev, dev_name(dev),
-						     dsi->host->dev, ctx,
+						     dev, ctx,
 						     &otm8009a_backlight_ops,
 						     NULL);
 	if (IS_ERR(ctx->bl_dev)) {
@@ -482,7 +465,7 @@ static int otm8009a_probe(struct mipi_dsi_device *dsi)
 
 	ctx->bl_dev->props.max_brightness = OTM8009A_BACKLIGHT_MAX;
 	ctx->bl_dev->props.brightness = OTM8009A_BACKLIGHT_DEFAULT;
-	ctx->bl_dev->props.power = FB_BLANK_POWERDOWN;
+	ctx->bl_dev->props.power = BACKLIGHT_POWER_OFF;
 	ctx->bl_dev->props.type = BACKLIGHT_RAW;
 
 	drm_panel_add(&ctx->panel);