diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 1062 |
1 files changed, 930 insertions, 132 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 6f929bfa9fcd..157678b821fc 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Hardware monitoring chip drivers configuration # @@ -17,7 +18,7 @@ menuconfig HWMON To find out which specific driver(s) you need, use the sensors-detect script from the lm_sensors package. Read - <file:Documentation/hwmon/userspace-tools> for details. + <file:Documentation/hwmon/userspace-tools.rst> for details. This support can also be built as a module. If so, the module will be called hwmon. @@ -37,21 +38,9 @@ config HWMON_DEBUG_CHIP comment "Native drivers" -config SENSORS_AB8500 - tristate "AB8500 thermal monitoring" - depends on AB8500_GPADC && AB8500_BM - help - If you say yes here you get support for the thermal sensor part - of the AB8500 chip. The driver includes thermal management for - AB8500 die and two GPADC channels. The GPADC channel are preferably - used to access sensors outside the AB8500 chip. - - This driver can also be built as a module. If so, the module - will be called abx500-temp. - config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" - depends on X86 && DMI + depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency @@ -59,25 +48,33 @@ config SENSORS_ABITUGURU chip can be found on Abit uGuru featuring motherboards (most modern Abit motherboards from before end 2005). For more info and a list of which motherboards have which revision see - Documentation/hwmon/abituguru + Documentation/hwmon/abituguru.rst This driver can also be built as a module. If so, the module will be called abituguru. config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" - depends on X86 && DMI + depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors and their settings is supported. The third revision of the Abit uGuru chip can be found on recent Abit motherboards (since end 2005). For more info and a list of which motherboards have which - revision see Documentation/hwmon/abituguru3 + revision see Documentation/hwmon/abituguru3.rst This driver can also be built as a module. If so, the module will be called abituguru3. +config SENSORS_SMPRO + tristate "Ampere's Altra SMpro hardware monitoring driver" + depends on MFD_SMPRO + help + If you say yes here you get support for the thermal, voltage, + current and power sensors of Ampere's Altra processor family SoC + with SMpro co-processor. + config SENSORS_AD7314 tristate "Analog Devices AD7314 and compatibles" depends on SPI @@ -108,17 +105,6 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. -config SENSORS_ADM1021 - tristate "Analog Devices ADM1021 and compatibles" - depends on I2C - help - If you say yes here you get support for Analog Devices ADM1021 - and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. - - This driver can also be built as a module. If so, the module - will be called adm1021. - config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" depends on I2C @@ -162,10 +148,21 @@ config SENSORS_ADM1031 This driver can also be built as a module. If so, the module will be called adm1031. +config SENSORS_ADM1177 + tristate "Analog Devices ADM1177 and compatibles" + depends on I2C + help + If you say yes here you get support for Analog Devices ADM1177 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called adm1177. + config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" depends on I2C select HWMON_VID + select REGMAP_I2C help If you say yes here you get support for Analog Devices ADM9240, Dallas DS1780, National Semiconductor LM81 sensor chips. @@ -175,9 +172,10 @@ config SENSORS_ADM9240 config SENSORS_ADT7X10 tristate + select REGMAP help This module contains common code shared by the ADT7310/ADT7320 and - ADT7410/ADT7420 temperature monitoring chip drivers. + ADT7410/ADT7420/ADT7422 temperature monitoring chip drivers. If built as a module, the module will be called adt7x10. @@ -193,12 +191,12 @@ config SENSORS_ADT7310 will be called adt7310. config SENSORS_ADT7410 - tristate "Analog Devices ADT7410/ADT7420" + tristate "Analog Devices ADT7410/ADT7420/ADT7422" depends on I2C select SENSORS_ADT7X10 help If you say yes here you get support for the Analog Devices - ADT7410 and ADT7420 temperature monitoring chips. + ADT7410, ADT7420 and ADT7422 temperature monitoring chips. This driver can also be built as a module. If so, the module will be called adt7410. @@ -226,6 +224,7 @@ config SENSORS_ADT7462 config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the Analog Devices ADT7470 temperature monitoring chips. @@ -245,6 +244,40 @@ config SENSORS_ADT7475 This driver can also be built as a module. If so, the module will be called adt7475. +config SENSORS_AHT10 + tristate "Aosong AHT10, AHT20, DHT20" + depends on I2C + select CRC8 + help + If you say yes here, you get support for the Aosong AHT10, AHT20 and + DHT20 temperature and humidity sensors + + This driver can also be built as a module. If so, the module + will be called aht10. + +config SENSORS_AQUACOMPUTER_D5NEXT + tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" + depends on USB_HID + select CRC16 + help + If you say yes here you get support for sensors and fans of + the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan + controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow + Next sensor, where available. + + This driver can also be built as a module. If so, the module + will be called aquacomputer_d5next. + +config SENSORS_AS370 + tristate "Synaptics AS370 SoC hardware monitoring driver" + help + If you say yes here you get support for the PVT sensors of + the Synaptics AS370 SoC + + This driver can also be built as a module. If so, the module + will be called as370-hwmon. + + config SENSORS_ASC7621 tristate "Andigilog aSC7621" depends on I2C @@ -258,6 +291,25 @@ config SENSORS_ASC7621 This driver can also be built as a module. If so, the module will be called asc7621. +config SENSORS_ASUS_ROG_RYUJIN + tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver" + depends on HID + help + If you say yes here you get support for the fans and sensors of + the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler. + + This driver can also be built as a module. If so, the module + will be called asus_rog_ryujin. + +config SENSORS_AXI_FAN_CONTROL + tristate "Analog Devices FAN Control HDL Core driver" + help + If you say yes here you get support for the Analog Devices + AXI HDL FAN monitoring core. + + This driver can also be built as a module. If so, the module + will be called axi-fan-control + config SENSORS_K8TEMP tristate "AMD Athlon64/FX or Opteron temperature sensor" depends on X86 && PCI @@ -272,7 +324,7 @@ config SENSORS_K8TEMP config SENSORS_K10TEMP tristate "AMD Family 10h+ temperature sensor" - depends on X86 && PCI && AMD_NB + depends on X86 && PCI && AMD_NODE help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of @@ -283,6 +335,26 @@ config SENSORS_K10TEMP This driver can also be built as a module. If so, the module will be called k10temp. +config SENSORS_KBATT + tristate "KEBA battery controller support" + depends on KEBA_CP500 + help + This driver supports the battery monitoring controller found in + KEBA system FPGA devices. + + This driver can also be built as a module. If so, the module + will be called kbatt. + +config SENSORS_KFAN + tristate "KEBA fan controller support" + depends on KEBA_CP500 + help + This driver supports the fan controller found in KEBA system + FPGA devices. + + This driver can also be built as a module. If so, the module + will be called kfan. + config SENSORS_FAM15H_POWER tristate "AMD Family 15h processor power" depends on X86 && PCI && CPU_SUP_AMD @@ -298,7 +370,6 @@ config SENSORS_APPLESMC depends on INPUT && X86 select NEW_LEDS select LEDS_CLASS - select INPUT_POLLDEV help This driver provides support for the Apple System Management Controller, which provides an accelerometer (Apple Sudden Motion @@ -340,7 +411,7 @@ config SENSORS_ARM_SCPI config SENSORS_ASB100 tristate "Asus ASB100 Bach" - depends on X86 && I2C + depends on (X86 || COMPILE_TEST) && I2C select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor @@ -351,6 +422,7 @@ config SENSORS_ASB100 config SENSORS_ASPEED tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" + depends on ARCH_ASPEED || COMPILE_TEST depends on THERMAL || THERMAL=n select REGMAP help @@ -360,6 +432,17 @@ config SENSORS_ASPEED This driver can also be built as a module. If so, the module will be called aspeed_pwm_tacho. +config SENSORS_ASPEED_G6 + tristate "ASPEED G6 PWM and Fan tach driver" + depends on ARCH_ASPEED || COMPILE_TEST + depends on PWM + help + This driver provides support for ASPEED G6 PWM and Fan Tach + controllers. + + This driver can also be built as a module. If so, the module + will be called aspeed_g6_pwm_tach. + config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" depends on I2C @@ -374,6 +457,96 @@ config SENSORS_ATXP1 This driver can also be built as a module. If so, the module will be called atxp1. +config SENSORS_BT1_PVT + tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" + depends on MIPS_BAIKAL_T1 || COMPILE_TEST + select POLYNOMIAL + help + If you say yes here you get support for Baikal-T1 PVT sensor + embedded into the SoC. + + This driver can also be built as a module. If so, the module will be + called bt1-pvt. + +config SENSORS_BT1_PVT_ALARMS + bool "Enable Baikal-T1 PVT sensor alarms" + depends on SENSORS_BT1_PVT + help + Baikal-T1 PVT IP-block provides threshold registers for each + supported sensor. But the corresponding interrupts might be + generated by the thresholds comparator only in synchronization with + a data conversion. Additionally there is only one sensor data can + be converted at a time. All of these makes the interface impossible + to be used for the hwmon alarms implementation without periodic + switch between the PVT sensors. By default the data conversion is + performed on demand from the user-space. If this config is enabled + the data conversion will be periodically performed and the data will be + saved in the internal driver cache. + +config SENSORS_CGBC + tristate "Congatec Board Controller Sensors" + depends on MFD_CGBC + help + Enable sensors support for the Congatec Board Controller. It has + temperature, voltage, current and fan sensors. + + This driver can also be built as a module. If so, the module will be + called cgbc-hwmon. + +config SENSORS_CHIPCAP2 + tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" + depends on I2C + help + Say yes here to build support for the Amphenol ChipCap 2 + relative humidity and temperature sensor. + + To compile this driver as a module, choose M here: the module + will be called chipcap2. + +config SENSORS_CORSAIR_CPRO + tristate "Corsair Commander Pro controller" + depends on HID + help + If you say yes here you get support for the Corsair Commander Pro + controller. + + This driver can also be built as a module. If so, the module + will be called corsair-cpro. + +config SENSORS_CORSAIR_PSU + tristate "Corsair PSU HID controller" + depends on HID + help + If you say yes here you get support for Corsair PSUs with a HID + interface. + Currently this driver supports the (RM/HX)550i, (RM/HX)650i, + (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies + by Corsair. + + This driver can also be built as a module. If so, the module + will be called corsair-psu. + +config SENSORS_CROS_EC + tristate "ChromeOS Embedded Controller sensors" + depends on MFD_CROS_EC_DEV + default MFD_CROS_EC_DEV + help + If you say yes here you get support for ChromeOS Embedded Controller + sensors. + + This driver can also be built as a module. If so, the module + will be called cros_ec_hwmon. + +config SENSORS_DRIVETEMP + tristate "Hard disk drives with temperature sensors" + depends on SCSI && ATA + help + If you say yes you get support for the temperature sensor on + hard disk drives. + + This driver can also be built as a module. If so, the module + will be called drivetemp. + config SENSORS_DS620 tristate "Dallas Semiconductor DS620" depends on I2C @@ -401,7 +574,9 @@ config SENSORS_DS1621 config SENSORS_DELL_SMM tristate "Dell laptop SMM BIOS hwmon driver" + depends on ACPI_WMI depends on X86 + imply THERMAL help This hwmon driver adds support for reporting temperature of different sensors and controls the fans on Dell laptops via System Management @@ -410,6 +585,21 @@ config SENSORS_DELL_SMM When option I8K is also enabled this driver provides legacy /proc/i8k userspace interface for i8kutils package. +config I8K + bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" + depends on SENSORS_DELL_SMM + depends on PROC_FS + help + This option enables the legacy /proc/i8k userspace interface of the + dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS + version, temperatures and allows control of fan speeds of some Dell + laptops. Sometimes it also reports power and hotkey status. + + This interface is required to run programs from the i8kutils package. + + Say Y if you intend to run userspace programs that use this interface. + Say N otherwise. + config SENSORS_DA9052_ADC tristate "Dialog DA9052/DA9053 ADC" depends on PMIC_DA9052 @@ -440,8 +630,19 @@ config SENSORS_I5K_AMB This driver can also be built as a module. If so, the module will be called i5k_amb. +config SENSORS_SPARX5 + tristate "Sparx5 SoC temperature sensor" + depends on ARCH_SPARX5 || COMPILE_TEST + help + If you say yes here you get support for temperature monitoring + with the Microchip Sparx5 SoC. + + This driver can also be built as a module. If so, the module + will be called sparx5-temp. + config SENSORS_F71805F tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for hardware monitoring @@ -453,6 +654,7 @@ config SENSORS_F71805F config SENSORS_F71882FG tristate "Fintek F71882FG and compatibles" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for hardware monitoring @@ -483,15 +685,34 @@ config SENSORS_F75375S This driver can also be built as a module. If so, the module will be called f75375s. +config SENSORS_GSC + tristate "Gateworks System Controller ADC" + depends on MFD_GATEWORKS_GSC + help + Support for the Gateworks System Controller A/D converters. + + To compile this driver as a module, choose M here: + the module will be called gsc-hwmon. + config SENSORS_MC13783_ADC tristate "Freescale MC13783/MC13892 ADC" depends on MFD_MC13XXX help Support for the A/D converter on MC13783 and MC13892 PMIC. +config SENSORS_MC33XS2410 + tristate "MC33XS2410 HWMON support" + depends on PWM_MC33XS2410 + help + If you say yes here you get hardware monitoring support for + MC33XS2410. + + This driver can also be built as a module. If so, the module + will be called mc33xs2410_hwmon. + config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" - depends on X86 && I2C + depends on (X86 || COMPILE_TEST) && I2C help If you say yes here you get support for the following Fujitsu Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, @@ -517,6 +738,16 @@ config SENSORS_FTSTEUTATES This driver can also be built as a module. If so, the module will be called ftsteutates. +config SENSORS_GIGABYTE_WATERFORCE + tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. + + This driver can also be built as a module. If so, the module + will be called gigabyte_waterforce. + config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C @@ -538,6 +769,16 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. +config SENSORS_GPD + tristate "GPD handhelds" + depends on X86 && DMI && HAS_IOPORT + help + If you say yes here you get support for fan readings and + control over GPD handheld devices. + + Can also be built as a module. In that case it will be + called gpd-fan. + config SENSORS_G760A tristate "GMT G760A" depends on I2C @@ -569,6 +810,15 @@ config SENSORS_GPIO_FAN This driver can also be built as a module. If so, the module will be called gpio-fan. +config SENSORS_GXP_FAN_CTRL + tristate "HPE GXP fan controller" + depends on ARCH_HPE_GXP || COMPILE_TEST + help + If you say yes here you get support for GXP fan control functionality. + + The GXP controls fan function via the CPLD through the use of PWM + registers. This driver reports status and pwm setting of the fans. + config SENSORS_HIH6130 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" depends on I2C @@ -579,6 +829,27 @@ config SENSORS_HIH6130 This driver can also be built as a module. If so, the module will be called hih6130. +config SENSORS_HS3001 + tristate "Renesas HS3001 humidity and temperature sensors" + depends on I2C + help + If you say yes here you get support for the Renesas HS3001, + to HS3004 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called hs3001. + +config SENSORS_HTU31 + tristate "Measurement Specialties HTU31 humidity and temperature sensor" + depends on I2C + select CRC8 + help + If you say yes here you get support for the HTU31 humidity + and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called htu31. + config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" select IPMI_SI @@ -643,10 +914,22 @@ config SENSORS_CORETEMP help If you say yes here you get support for the temperature sensor inside your CPU. Most of the family 6 CPUs - are supported. Check Documentation/hwmon/coretemp for details. + are supported. Check Documentation/hwmon/coretemp.rst for details. + +config SENSORS_ISL28022 + tristate "Renesas ISL28022" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for ISL28022 power monitor. + Check Documentation/hwmon/isl28022.rst for details. + + This driver can also be built as a module. If so, the module + will be called isl28022. config SENSORS_IT87 tristate "ITE IT87xx and compatibles" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -659,19 +942,10 @@ config SENSORS_IT87 This driver can also be built as a module. If so, the module will be called it87. -config SENSORS_JZ4740 - tristate "Ingenic JZ4740 SoC ADC driver" - depends on MACH_JZ4740 && MFD_JZ4740_ADC - help - If you say yes here you get support for reading adc values from the ADCIN - pin on Ingenic JZ4740 SoC based boards. - - This driver can also be built as a module. If so, the module will be - called jz4740-hwmon. - config SENSORS_JC42 tristate "JEDEC JC42.4 compliant memory module temperature sensors" depends on I2C + select REGMAP_I2C help If you say yes here, you get support for JEDEC JC42.4 compliant temperature sensors, which are used on many DDR3 memory modules for @@ -683,6 +957,16 @@ config SENSORS_JC42 This driver can also be built as a module. If so, the module will be called jc42. +config SENSORS_POWERZ + tristate "ChargerLAB POWER-Z USB-C tester" + depends on USB + help + If you say yes here you get support for ChargerLAB POWER-Z series of + USB-C charging testers. + + This driver can also be built as a module. If so, the module + will be called powerz. + config SENSORS_POWR1220 tristate "Lattice POWR1220 Power Monitoring" depends on I2C @@ -694,6 +978,28 @@ config SENSORS_POWR1220 This driver can also be built as a module. If so, the module will be called powr1220. +config SENSORS_LAN966X + tristate "Microchip LAN966x Hardware Monitoring" + depends on SOC_LAN966 || COMPILE_TEST + select REGMAP + select POLYNOMIAL + help + If you say yes here you get support for temperature monitoring + on the Microchip LAN966x SoC. + + This driver can also be built as a module. If so, the module + will be called lan966x-hwmon. + +config SENSORS_LENOVO_EC + tristate "Sensor reader for Lenovo ThinkStations" + depends on X86 + help + If you say yes here you get support for LENOVO + EC Sensor data on newer ThinkStation systems + + This driver can also be built as a module. If so, the module + will be called lenovo_ec_sensors. + config SENSORS_LINEAGE tristate "Lineage Compact Power Line Power Entry Module" depends on I2C @@ -705,6 +1011,16 @@ config SENSORS_LINEAGE This driver can also be built as a module. If so, the module will be called lineage-pem. +config SENSORS_LOCHNAGAR + tristate "Lochnagar Hardware Monitor" + depends on MFD_LOCHNAGAR + help + If you say yes here you get support for Lochnagar 2 temperature, + voltage and current sensors abilities. + + This driver can also be built as a module. If so, the module + will be called lochnagar-hwmon. + config SENSORS_LTC2945 tristate "Linear Technology LTC2945" depends on I2C @@ -716,6 +1032,33 @@ config SENSORS_LTC2945 This driver can also be built as a module. If so, the module will be called ltc2945. +config SENSORS_LTC2947 + tristate + +config SENSORS_LTC2947_I2C + tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over I2C" + depends on I2C + select REGMAP_I2C + select SENSORS_LTC2947 + help + If you say yes here you get support for Linear Technology LTC2947 + I2C High Precision Power and Energy Monitor + + This driver can also be built as a module. If so, the module will + be called ltc2947-i2c. + +config SENSORS_LTC2947_SPI + tristate "Analog Devices LTC2947 High Precision Power and Energy Monitor over SPI" + depends on SPI_MASTER + select REGMAP_SPI + select SENSORS_LTC2947 + help + If you say yes here you get support for Linear Technology LTC2947 + SPI High Precision Power and Energy Monitor + + This driver can also be built as a module. If so, the module will + be called ltc2947-spi. + config SENSORS_LTC2990 tristate "Linear Technology LTC2990" depends on I2C @@ -727,6 +1070,30 @@ config SENSORS_LTC2990 This driver can also be built as a module. If so, the module will be called ltc2990. +config SENSORS_LTC2991 + tristate "Analog Devices LTC2991" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Analog Devices LTC2991 + Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 + supports a combination of voltage, current and temperature monitoring. + + This driver can also be built as a module. If so, the module will + be called ltc2991. + +config SENSORS_LTC2992 + tristate "Linear Technology LTC2992" + depends on I2C + depends on GPIOLIB + help + If you say yes here you get support for Linear Technology LTC2992 + I2C System Monitor. The LTC2992 measures current, voltage, and + power of two supplies. + + This driver can also be built as a module. If so, the module will + be called ltc2992. + config SENSORS_LTC4151 tristate "Linear Technology LTC4151" depends on I2C @@ -789,13 +1156,36 @@ config SENSORS_LTC4261 This driver can also be built as a module. If so, the module will be called ltc4261. +config SENSORS_LTC4282 + tristate "Analog Devices LTC4282" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Analog Devices LTC4282 + High Current Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4282. + config SENSORS_LTQ_CPUTEMP bool "Lantiq cpu temperature sensor driver" - depends on LANTIQ + depends on SOC_XWAY help If you say yes here you get support for the temperature sensor inside your CPU. +config SENSORS_MACSMC_HWMON + tristate "Apple SMC (Apple Silicon)" + depends on MFD_MACSMC && OF + help + This driver enables hwmon support for current, power, temperature, + and voltage sensors, as well as fan speed reporting and control + on Apple Silicon devices. Say Y here if you have an Apple Silicon + device. + + This driver can also be built as a module. If so, the module will + be called macsmc-hwmon. + config SENSORS_MAX1111 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" depends on SPI_MASTER @@ -806,6 +1196,15 @@ config SENSORS_MAX1111 This driver can also be built as a module. If so, the module will be called max1111. +config SENSORS_MAX127 + tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" + depends on I2C + help + Say y here to support Maxim's MAX127 DAS chips. + + This driver can also be built as a module. If so, the module + will be called max127. + config SENSORS_MAX16065 tristate "Maxim MAX16065 System Manager and compatibles" depends on I2C @@ -834,6 +1233,7 @@ config SENSORS_MAX1619 config SENSORS_MAX1668 tristate "Maxim MAX1668 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for MAX1668, MAX1989 and MAX1805 chips. @@ -851,7 +1251,7 @@ config SENSORS_MAX197 will be called max197. config SENSORS_MAX31722 -tristate "MAX31722 temperature sensor" + tristate "MAX31722 temperature sensor" depends on SPI help Support for the Maxim Integrated MAX31722/MAX31723 digital @@ -860,6 +1260,49 @@ tristate "MAX31722 temperature sensor" This driver can also be built as a module. If so, the module will be called max31722. +config SENSORS_MAX31730 + tristate "MAX31730 temperature sensor" + depends on I2C + help + Support for the Maxim Integrated MAX31730 3-Channel Remote + Temperature Sensor. + + This driver can also be built as a module. If so, the module + will be called max31730. + +config SENSORS_MAX31760 + tristate "MAX31760 fan speed controller" + depends on I2C + select REGMAP_I2C + help + Support for the Analog Devices MAX31760 Precision Fan-Speed + Controller. MAX31760 integrates temperature sensing along with + precision PWM fan control. + + This driver can also be built as a module. If so, the module + will be called max31760. + +config MAX31827 + tristate "MAX31827 low-power temperature switch and similar devices" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for MAX31827, MAX31828 and + MAX31829 low-power temperature switches and sensors connected with I2C. + + This driver can also be built as a module. If so, the module + will be called max31827. + +config SENSORS_MAX6620 + tristate "Maxim MAX6620 fan controller" + depends on I2C + help + If you say yes here you get support for the MAX6620 + fan controller. + + This driver can also be built as a module. If so, the module + will be called max6620. + config SENSORS_MAX6621 tristate "Maxim MAX6621 sensor chip" depends on I2C @@ -877,6 +1320,7 @@ config SENSORS_MAX6621 config SENSORS_MAX6639 tristate "Maxim MAX6639 sensor chip" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the MAX6639 sensor chips. @@ -884,20 +1328,10 @@ config SENSORS_MAX6639 This driver can also be built as a module. If so, the module will be called max6639. -config SENSORS_MAX6642 - tristate "Maxim MAX6642 sensor chip" - depends on I2C - help - If you say yes here you get support for MAX6642 sensor chip. - MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor - with Overtemperature Alarm from Maxim. - - This driver can also be built as a module. If so, the module - will be called max6642. - config SENSORS_MAX6650 tristate "Maxim MAX6650 sensor chip" depends on I2C + depends on THERMAL || THERMAL=n help If you say yes here you get support for the MAX6650 / MAX6651 sensor chips. @@ -926,6 +1360,23 @@ config SENSORS_MAX31790 This driver can also be built as a module. If so, the module will be called max31790. +config SENSORS_MAX77705 + tristate "MAX77705 current and voltage sensor" + depends on MFD_MAX77705 + help + If you say yes here you get support for MAX77705 sensors connected with I2C. + + This driver can also be built as a module. If so, the module + will be called max77705-hwmon. + +config SENSORS_MC34VR500 + tristate "NXP MC34VR500 hardware monitoring driver" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the temperature and input + voltage sensors of the NXP MC34VR500. + config SENSORS_MCP3021 tristate "Microchip MCP3021 and compatibles" depends on I2C @@ -938,7 +1389,7 @@ config SENSORS_MCP3021 will be called mcp3021. config SENSORS_MLXREG_FAN - tristate "Mellanox Mellanox FAN driver" + tristate "Mellanox FAN driver" depends on MELLANOX_PLATFORM imply THERMAL select REGMAP @@ -960,6 +1411,17 @@ config SENSORS_TC654 This driver can also be built as a module. If so, the module will be called tc654. +config SENSORS_TPS23861 + tristate "Texas Instruments TPS23861 PoE PSE" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments + TPS23861 802.3at PoE PSE chips. + + This driver can also be built as a module. If so, the module + will be called tps23861. + config SENSORS_MENF21BMC_HWMON tristate "MEN 14F021P00 BMC Hardware Monitoring" depends on MFD_MENF21BMC @@ -970,6 +1432,16 @@ config SENSORS_MENF21BMC_HWMON This driver can also be built as a module. If so the module will be called menf21bmc_hwmon. +config SENSORS_MR75203 + tristate "Moortec Semiconductor MR75203 PVT Controller" + select REGMAP_MMIO + help + If you say yes here you get support for Moortec MR75203 + PVT controller. + + This driver can also be built as a module. If so, the module + will be called mr75203. + config SENSORS_ADCXX tristate "National Semiconductor ADCxxxSxxx" depends on SPI_MASTER @@ -1004,8 +1476,8 @@ config SENSORS_LM70 depends on SPI_MASTER help If you say yes here you get support for the National Semiconductor - LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- - ture sensor chips. + LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, + TMP125 digital temperature sensor chips. This driver can also be built as a module. If so, the module will be called lm70. @@ -1022,12 +1494,15 @@ config SENSORS_LM73 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C + depends on I3C || !I3C select REGMAP_I2C + select REGMAP_I3C if I3C help If you say yes here you get support for one common type of temperature sensor chip, with models including: - Analog Devices ADT75 + - Atmel (now Microchip) AT30TS74 - Dallas Semiconductor DS75, DS1775 and DS7505 - Global Mixed-mode Technology (GMT) G751 - Maxim MAX6625 and MAX6626 @@ -1084,6 +1559,7 @@ config SENSORS_LM80 config SENSORS_LM83 tristate "National Semiconductor LM83 and compatibles" depends on I2C + select REGMAP help If you say yes here you get support for National Semiconductor LM82 and LM83 sensor chips. @@ -1118,12 +1594,16 @@ config SENSORS_LM90 tristate "National Semiconductor LM90 and compatibles" depends on I2C help - If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, - Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, - MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, - Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and - Texas Instruments TMP451 sensor chips. + If you say yes here you get support for National Semiconductor LM84, + LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, + ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, + Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, + MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, + MAX6696, + ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, + Winbond/Nuvoton W83L771W/G/AWG/ASG, NCT7716, NCT7717 and NCT7718, + Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 + sensor chips. This driver can also be built as a module. If so, the module will be called lm90. @@ -1131,9 +1611,10 @@ config SENSORS_LM90 config SENSORS_LM92 tristate "National Semiconductor LM92 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for National Semiconductor LM92 - and Maxim MAX6635 sensor chips. + and LM76 as well as Maxim MAX6633/6634/6635 sensor chips. This driver can also be built as a module. If so, the module will be called lm92. @@ -1152,6 +1633,7 @@ config SENSORS_LM93 config SENSORS_LM95234 tristate "National Semiconductor LM95234 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the LM95233 and LM95234 temperature sensor chips. @@ -1182,6 +1664,7 @@ config SENSORS_LM95245 config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -1196,6 +1679,7 @@ config SENSORS_PC87360 config SENSORS_PC87427 tristate "National Semiconductor PC87427" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get access to the hardware monitoring @@ -1209,8 +1693,8 @@ config SENSORS_PC87427 will be called pc87427. config SENSORS_NTC_THERMISTOR - tristate "NTC thermistor support from Murata" - depends on !OF || IIO=n || IIO + tristate "NTC thermistor support" + depends on IIO depends on THERMAL || !THERMAL_OF help This driver supports NTC thermistors sensor reading and its @@ -1223,10 +1707,11 @@ config SENSORS_NTC_THERMISTOR B57891S0103 from EPCOS. This driver can also be built as a module. If so, the module - will be called ntc-thermistor. + will be called ntc_thermistor. config SENSORS_NCT6683 tristate "Nuvoton NCT6683D" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the hardware monitoring @@ -1235,10 +1720,34 @@ config SENSORS_NCT6683 This driver can also be built as a module. If so, the module will be called nct6683. +config SENSORS_NCT6694 + tristate "Nuvoton NCT6694 Hardware Monitor support" + depends on MFD_NCT6694 + help + Say Y here to support Nuvoton NCT6694 hardware monitoring + functionality. + + This driver can also be built as a module. If so, the module + will be called nct6694-hwmon. + +config SENSORS_NCT6775_CORE + tristate + select REGMAP + help + This module contains common code shared by the platform and + i2c versions of the nct6775 driver; it is not useful on its + own. + + If built as a module, the module will be called + nct6775-core. + config SENSORS_NCT6775 - tristate "Nuvoton NCT6775F and compatibles" + tristate "Platform driver for Nuvoton NCT6775F and compatibles" + depends on HAS_IOPORT depends on !PPC + depends on ACPI || ACPI=n select HWMON_VID + select SENSORS_NCT6775_CORE help If you say yes here you get support for the hardware monitoring functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, @@ -1249,6 +1758,34 @@ config SENSORS_NCT6775 This driver can also be built as a module. If so, the module will be called nct6775. +config SENSORS_NCT6775_I2C + tristate "I2C driver for Nuvoton NCT6775F and compatibles" + depends on I2C + select REGMAP_I2C + select SENSORS_NCT6775_CORE + help + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, + NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible + Super-I/O chips via their I2C interface. + + If you're not building a kernel for a BMC, this is probably + not the driver you want (see CONFIG_SENSORS_NCT6775). + + This driver can also be built as a module. If so, the module + will be called nct6775-i2c. + +config SENSORS_NCT7363 + tristate "Nuvoton NCT7363Y" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the Nuvoton NCT7363Y + hardware monitoring chip. + + This driver can also be built as a module. If so, the module + will be called nct7363. + config SENSORS_NCT7802 tristate "Nuvoton NCT7802Y" depends on I2C @@ -1262,10 +1799,12 @@ config SENSORS_NCT7802 config SENSORS_NCT7904 tristate "Nuvoton NCT7904" - depends on I2C + depends on I2C && WATCHDOG + select WATCHDOG_CORE help If you say yes here you get support for the Nuvoton NCT7904 - hardware monitoring chip, including manual fan speed control. + hardware monitoring chip, including manual fan speed control + and support for the integrated watchdog. This driver can also be built as a module. If so, the module will be called nct7904. @@ -1295,6 +1834,36 @@ config SENSORS_NSA320 This driver can also be built as a module. If so, the module will be called nsa320-hwmon. +config SENSORS_NZXT_KRAKEN2 + tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. + + This driver can also be built as a module. If so, the module + will be called nzxt-kraken2. + +config SENSORS_NZXT_KRAKEN3 + tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. + + This driver can also be built as a module. If so, the module + will be called nzxt-kraken3. + +config SENSORS_NZXT_SMART2 + tristate "NZXT RGB & Fan Controller/Smart Device v2" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT RGB & Fan Controller/Smart Device v2. + + This driver can also be built as a module. If so, the module + will be called nzxt-smart2. + source "drivers/hwmon/occ/Kconfig" config SENSORS_PCF8591 @@ -1310,11 +1879,23 @@ config SENSORS_PCF8591 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. +source "drivers/hwmon/peci/Kconfig" + source "drivers/hwmon/pmbus/Kconfig" +config SENSORS_PT5161L + tristate "Astera Labs PT5161L PCIe retimer hardware monitoring" + depends on I2C + help + If you say yes here you get support for temperature monitoring + on the Astera Labs PT5161L PCIe retimer. + + This driver can also be built as a module. If so, the module + will be called pt5161l. + config SENSORS_PWM_FAN tristate "PWM fan" - depends on (PWM && OF) || COMPILE_TEST + depends on PWM || COMPILE_TEST depends on THERMAL || THERMAL=n help If you say yes here you get support for fans connected to PWM lines. @@ -1324,6 +1905,18 @@ config SENSORS_PWM_FAN This driver can also be built as a module. If so, the module will be called pwm-fan. +config SENSORS_QNAP_MCU_HWMON + tristate "QNAP MCU hardware monitoring" + depends on MFD_QNAP_MCU + depends on THERMAL || THERMAL=n + help + Say yes here to enable support for fan and temperature sensor + connected to a QNAP MCU, as found in a number of QNAP network + attached storage devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-hwmon. + config SENSORS_RASPBERRYPI_HWMON tristate "Raspberry Pi voltage monitor" depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) @@ -1334,6 +1927,36 @@ config SENSORS_RASPBERRYPI_HWMON This driver can also be built as a module. If so, the module will be called raspberrypi-hwmon. +config SENSORS_SA67MCU + tristate "Kontron sa67mcu hardware monitoring driver" + depends on MFD_SL28CPLD || COMPILE_TEST + help + If you say yes here you get support for the voltage and temperature + monitor of the sa67 board management controller. + + This driver can also be built as a module. If so, the module + will be called sa67mcu-hwmon. + +config SENSORS_SL28CPLD + tristate "Kontron sl28cpld hardware monitoring driver" + depends on MFD_SL28CPLD || COMPILE_TEST + help + If you say yes here you get support for the fan supervisor of the + sl28cpld board management controller. + + This driver can also be built as a module. If so, the module + will be called sl28cpld-hwmon. + +config SENSORS_SBTSI + tristate "Emulated SB-TSI temperature sensor" + depends on I2C + help + If you say yes here you get support for emulated temperature + sensors on AMD SoCs with SB-TSI interface connected to a BMC device. + + This driver can also be built as a module. If so, the module will + be called sbtsi_temp. + config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GPIOLIB || COMPILE_TEST @@ -1349,8 +1972,8 @@ config SENSORS_SHT21 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." depends on I2C help - If you say yes here you get support for the Sensiron SHT21, SHT25 - humidity and temperature sensors. + If you say yes here you get support for the Sensiron SHT20, SHT21, + SHT25 humidity and temperature sensors. This driver can also be built as a module. If so, the module will be called sht21. @@ -1366,36 +1989,30 @@ config SENSORS_SHT3x This driver can also be built as a module. If so, the module will be called sht3x. -config SENSORS_SHTC1 - tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." +config SENSORS_SHT4x + tristate "Sensiron humidity and temperature sensors. SHT4x and compat." depends on I2C + select CRC8 help - If you say yes here you get support for the Sensiron SHTC1 and SHTW1 - humidity and temperature sensors. + If you say yes here you get support for the Sensiron SHT40, SHT41 and + SHT45 humidity and temperature sensors. This driver can also be built as a module. If so, the module - will be called shtc1. + will be called sht4x. -config SENSORS_S3C - tristate "Samsung built-in ADC" - depends on S3C_ADC +config SENSORS_SHTC1 + tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." + depends on I2C help - If you say yes here you get support for the on-board ADCs of - the Samsung S3C24XX, S3C64XX and other series of SoC + If you say yes here you get support for the Sensiron SHTC1, SHTW1, + and SHTC3 humidity and temperature sensors. This driver can also be built as a module. If so, the module - will be called s3c-hwmon. - -config SENSORS_S3C_RAW - bool "Include raw channel attributes in sysfs" - depends on SENSORS_S3C - help - Say Y here if you want to include raw copies of all the ADC - channels in sysfs. + will be called shtc1. config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" - depends on PCI + depends on PCI && HAS_IOPORT help If you say yes here you get support for the integrated sensors in SiS5595 South Bridges. @@ -1403,8 +2020,19 @@ config SENSORS_SIS5595 This driver can also be built as a module. If so, the module will be called sis5595. +config SENSORS_SY7636A + tristate "Silergy SY7636A" + depends on MFD_SY7636A + help + If you say yes here you get support for the thermistor readout of + the Silergy SY7636A PMIC. + + This driver can also be built as a module. If so, the module + will be called sy7636a-hwmon. + config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" + depends on HAS_IOPORT depends on I2C && !PPC select HWMON_VID help @@ -1436,6 +2064,19 @@ config SENSORS_EMC2103 This driver can also be built as a module. If so, the module will be called emc2103. +config SENSORS_EMC2305 + tristate "Microchip EMC2305 and compatible EMC2301/2/3" + depends on I2C + imply THERMAL + help + If you say yes here you get support for the Microchip EMC2305 + fan controller chips. + The Microchip EMC2305 is a fan controller for up to 5 fans. + Fan rotation speeds are reported in RPM. + + This driver can also be built as a module. If so, the module + will be called emc2305. + config SENSORS_EMC6W201 tristate "SMSC EMC6W201" depends on I2C @@ -1448,6 +2089,7 @@ config SENSORS_EMC6W201 config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the integrated fan @@ -1482,6 +2124,7 @@ config SENSORS_SMSC47M192 config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the SMSC LPC47B397-NC @@ -1492,9 +2135,11 @@ config SENSORS_SMSC47B397 config SENSORS_SCH56XX_COMMON tristate + select REGMAP config SENSORS_SCH5627 tristate "SMSC SCH5627" + depends on HAS_IOPORT depends on !PPC && WATCHDOG select SENSORS_SCH56XX_COMMON select WATCHDOG_CORE @@ -1508,6 +2153,7 @@ config SENSORS_SCH5627 config SENSORS_SCH5636 tristate "SMSC SCH5636" + depends on HAS_IOPORT depends on !PPC && WATCHDOG select SENSORS_SCH56XX_COMMON select WATCHDOG_CORE @@ -1534,19 +2180,51 @@ config SENSORS_STTS751 This driver can also be built as a module. If so, the module will be called stts751. -config SENSORS_SMM665 - tristate "Summit Microelectronics SMM665" +config SENSORS_SFCTEMP + tristate "Starfive JH71x0 temperature sensor" + depends on ARCH_STARFIVE || COMPILE_TEST + help + If you say yes here you get support for temperature sensor + on the Starfive JH71x0 SoCs. + + This driver can also be built as a module. If so, the module + will be called sfctemp. + +config SENSORS_SG2042_MCU + tristate "Sophgo onboard MCU support" depends on I2C + depends on ARCH_SOPHGO || COMPILE_TEST help - If you say yes here you get support for the hardware monitoring - features of the Summit Microelectronics SMM665/SMM665B Six-Channel - Active DC Output Controller / Monitor. + Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides + power control and some basic information. - Other supported chips are SMM465, SMM665C, SMM764, and SMM766. - Support for those chips is untested. + This driver can be built as a module. If so, the module + will be called sg2042-mcu. - This driver can also be built as a module. If so, the module will - be called smm665. +config SENSORS_SURFACE_FAN + tristate "Surface Fan Driver" + depends on SURFACE_AGGREGATOR + depends on SURFACE_AGGREGATOR_BUS + help + Driver that provides monitoring of the fan on Surface Pro devices that + have a fan, like the Surface Pro 9. + + This makes the fan's current speed accessible through the hwmon + system. It does not provide control over the fan, the firmware is + responsible for that, this driver merely provides monitoring. + + Select M or Y here, if you want to be able to read the fan's speed. + +config SENSORS_SURFACE_TEMP + tristate "Microsoft Surface Thermal Sensor Driver" + depends on SURFACE_AGGREGATOR + depends on SURFACE_AGGREGATOR_BUS + help + Driver for monitoring thermal sensors connected via the Surface + Aggregator Module (embedded controller) on Microsoft Surface devices. + + This driver can also be built as a module. If so, the module + will be called surface_temp. config SENSORS_ADC128D818 tristate "Texas Instruments ADC128D818" @@ -1558,16 +2236,6 @@ config SENSORS_ADC128D818 This driver can also be built as a module. If so, the module will be called adc128d818. -config SENSORS_ADS1015 - tristate "Texas Instruments ADS1015" - depends on I2C - help - If you say yes here you get support for Texas Instruments - ADS1015/ADS1115 12/16-bit 4-input ADC device. - - This driver can also be built as a module. If so, the module - will be called ads1015. - config SENSORS_ADS7828 tristate "Texas Instruments ADS7828 and compatibles" depends on I2C @@ -1591,7 +2259,8 @@ config SENSORS_ADS7871 config SENSORS_AMC6821 tristate "Texas Instruments AMC6821" - depends on I2C + depends on I2C + select REGMAP_I2C help If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. @@ -1615,14 +2284,28 @@ config SENSORS_INA2XX select REGMAP_I2C help If you say yes here you get support for INA219, INA220, INA226, - INA230, and INA231 power monitor chips. + INA230, INA231, INA260, and SY24655 power monitor chips. The INA2xx driver is configured for the default configuration of the part as described in the datasheet. - Default value for Rshunt is 10 mOhms. + Default value for Rshunt is 10 mOhms except for INA260 which has an + internal 2 mOhm shunt resistor. This driver can also be built as a module. If so, the module will be called ina2xx. +config SENSORS_INA238 + tristate "Texas Instruments INA238 and compatibles" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for INA228, INA237, INA238, + INA700, INA780, and SQ52206 power monitor chips. This driver supports + voltage, current, power, energy, and temperature measurements as well + as alarm configuration. + + This driver can also be built as a module. If so, the module + will be called ina238. + config SENSORS_INA3221 tristate "Texas Instruments INA3221 Triple Power Monitor" depends on I2C @@ -1634,6 +2317,37 @@ config SENSORS_INA3221 This driver can also be built as a module. If so, the module will be called ina3221. +config SENSORS_SPD5118 + tristate "SPD5118 Compliant Temperature Sensors" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for SPD5118 (JEDEC JESD300) + compliant temperature sensors. Such sensors are found on DDR5 memory + modules. + + This driver can also be built as a module. If so, the module + will be called spd5118. + +config SENSORS_SPD5118_DETECT + bool "Enable detect function" + depends on SENSORS_SPD5118 + default (!DMI || !X86) + help + If enabled, the driver auto-detects if a chip in the SPD address + range is compliant to the SPD51888 standard and auto-instantiates + if that is the case. If disabled, SPD5118 compliant devices have + to be instantiated by other means. On X86 systems with DMI support + this will typically be done from DMI DDR detection code in the + I2C SMBus subsystem. Devicetree based systems will instantiate + attached devices if the DIMMs are listed in the devicetree file. + + Disabling the detect function will speed up boot time and reduce + the risk of mis-detecting SPD5118 compliant devices. However, it + may result in missed DIMMs under some circumstances. + + If unsure, say Y. + config SENSORS_TC74 tristate "Microchip TC74" depends on I2C @@ -1679,10 +2393,12 @@ config SENSORS_TMP103 config SENSORS_TMP108 tristate "Texas Instruments TMP108" depends on I2C + depends on I3C || !I3C select REGMAP_I2C + select REGMAP_I3C if I3C help If you say yes here you get support for Texas Instruments TMP108 - sensor chips. + sensor chips and NXP P3T1085. This driver can also be built as a module. If so, the module will be called tmp108. @@ -1690,9 +2406,10 @@ config SENSORS_TMP108 config SENSORS_TMP401 tristate "Texas Instruments TMP401 and compatibles" depends on I2C + select REGMAP help If you say yes here you get support for Texas Instruments TMP401, - TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips. + TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. This driver can also be built as a module. If so, the module will be called tmp401. @@ -1707,6 +2424,40 @@ config SENSORS_TMP421 This driver can also be built as a module. If so, the module will be called tmp421. +config SENSORS_TMP464 + tristate "Texas Instruments TMP464 and compatible" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments TMP464 + and TMP468 temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp464. + +config SENSORS_TMP513 + tristate "Texas Instruments TMP513 and compatibles" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments TMP512, + and TMP513 temperature and power supply sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp513. + +config SENSORS_TSC1641 + tristate "ST Microelectronics TSC1641 Power Monitor" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for TSC1641 power monitor chip. + The TSC1641 driver is configured for the default configuration of + the part except temperature is enabled by default. + + This driver can also be built as a module. If so, the module + will be called tsc1641. + config SENSORS_VEXPRESS tristate "Versatile Express" depends on VEXPRESS_CONFIG @@ -1726,7 +2477,7 @@ config SENSORS_VIA_CPUTEMP config SENSORS_VIA686A tristate "VIA686A" - depends on PCI + depends on PCI && HAS_IOPORT help If you say yes here you get support for the integrated sensors in Via 686A/B South Bridges. @@ -1736,6 +2487,7 @@ config SENSORS_VIA686A config SENSORS_VT1211 tristate "VIA VT1211" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -1747,7 +2499,7 @@ config SENSORS_VT1211 config SENSORS_VT8231 tristate "VIA VT8231" - depends on PCI + depends on PCI && HAS_IOPORT select HWMON_VID help If you say yes here then you get support for the integrated sensors @@ -1759,6 +2511,7 @@ config SENSORS_VT8231 config SENSORS_W83773G tristate "Nuvoton W83773G" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the Nuvoton W83773G hardware monitoring chip. @@ -1821,17 +2574,12 @@ config SENSORS_W83795 will be called w83795. config SENSORS_W83795_FANCTRL - bool "Include automatic fan control support (DANGEROUS)" + bool "Include automatic fan control support" depends on SENSORS_W83795 help If you say yes here, support for automatic fan speed control will be included in the driver. - This part of the code wasn't carefully reviewed and tested yet, - so enabling this option is strongly discouraged on production - servers. Only developers and testers should enable it for the - time being. - Please also note that this option will create sysfs attribute files which may change in the future, so you shouldn't rely on them being stable. @@ -1859,6 +2607,7 @@ config SENSORS_W83L786NG config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -1870,7 +2619,8 @@ config SENSORS_W83627HF will be called w83627hf. config SENSORS_W83627EHF - tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG, NCT6775F, NCT6776F" + tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -1883,8 +2633,7 @@ config SENSORS_W83627EHF the Core 2 Duo. And also the W83627UHG, which is a stripped down version of the W83627DHG (as far as hardware monitoring goes.) - This driver also supports Nuvoton W83667HG, W83667HG-B, NCT6775F - (also known as W83667HG-I), and NCT6776F. + This driver also supports Nuvoton W83667HG and W83667HG-B. This driver can also be built as a module. If so, the module will be called w83627ehf. @@ -1924,6 +2673,17 @@ config SENSORS_XGENE If you say yes here you get support for the temperature and power sensors for APM X-Gene SoC. +config SENSORS_INTEL_M10_BMC_HWMON + tristate "Intel MAX10 BMC Hardware Monitoring" + depends on MFD_INTEL_M10_BMC_CORE + help + This driver provides support for the hardware monitoring functionality + on Intel MAX10 BMC chip. + + This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its + sensors monitor various telemetry data of different components on the + card, e.g. board temperature, FPGA core temperature/voltage/current. + if ACPI comment "ACPI drivers" @@ -1950,6 +2710,44 @@ config SENSORS_ATK0110 This driver can also be built as a module. If so, the module will be called asus_atk0110. +config SENSORS_ASUS_WMI + tristate "ASUS WMI X370/X470/B450/X399" + depends on ACPI_WMI + help + If you say yes here you get support for the ACPI hardware monitoring + interface found in X370/X470/B450/X399 ASUS motherboards. This driver + will provide readings of fans, voltages and temperatures through the system + firmware. + + This driver can also be built as a module. If so, the module + will be called asus_wmi_sensors. + +config SENSORS_ASUS_EC + tristate "ASUS EC Sensors" + depends on X86 + depends on ACPI_EC + help + If you say yes here you get support for the ACPI embedded controller + hardware monitoring interface found in some ASUS motherboards. This is + where such sensors as water flow and temperature, optional fans, and + additional temperature sensors (T_Sensor, chipset temperatures) + find themselves. + + This driver can also be built as a module. If so, the module + will be called asus_ec_sensors. + +config SENSORS_HP_WMI + tristate "HP WMI Sensors" + depends on ACPI_WMI + help + If you say yes here you get support for the ACPI hardware monitoring + interface found in HP (and some HP Compaq) business-class computers. + Available sensors vary between systems. Temperature and fan speed + sensors are the most common. + + This driver can also be built as a module. If so, the module + will be called hp_wmi_sensors. + endif # ACPI endif # HWMON |