diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 552 |
1 files changed, 450 insertions, 102 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 3176c33af6c6..157678b821fc 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -40,7 +40,7 @@ comment "Native drivers" config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" - depends on X86 && DMI + depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT help If you say yes here you get support for the sensor part of the first and second revision of the Abit uGuru chip. The voltage and frequency @@ -55,7 +55,7 @@ config SENSORS_ABITUGURU config SENSORS_ABITUGURU3 tristate "Abit uGuru (rev 3)" - depends on X86 && DMI + depends on (X86 && DMI) || COMPILE_TEST && HAS_IOPORT help If you say yes here you get support for the sensor part of the third revision of the Abit uGuru chip. Only reading the sensors @@ -105,18 +105,6 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. -config SENSORS_ADM1021 - tristate "Analog Devices ADM1021 and compatibles" - depends on I2C - depends on SENSORS_LM90=n - help - If you say yes here you get support for Analog Devices ADM1021 - and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, - Genesys Logic GL523SM, National Semiconductor LM84 and TI THMC10. - - This driver can also be built as a module. If so, the module - will be called adm1021. - config SENSORS_ADM1025 tristate "Analog Devices ADM1025 and compatibles" depends on I2C @@ -174,6 +162,7 @@ config SENSORS_ADM9240 tristate "Analog Devices ADM9240 and compatibles" depends on I2C select HWMON_VID + select REGMAP_I2C help If you say yes here you get support for Analog Devices ADM9240, Dallas DS1780, National Semiconductor LM81 sensor chips. @@ -186,7 +175,7 @@ config SENSORS_ADT7X10 select REGMAP help This module contains common code shared by the ADT7310/ADT7320 and - ADT7410/ADT7420 temperature monitoring chip drivers. + ADT7410/ADT7420/ADT7422 temperature monitoring chip drivers. If built as a module, the module will be called adt7x10. @@ -202,12 +191,12 @@ config SENSORS_ADT7310 will be called adt7310. config SENSORS_ADT7410 - tristate "Analog Devices ADT7410/ADT7420" + tristate "Analog Devices ADT7410/ADT7420/ADT7422" depends on I2C select SENSORS_ADT7X10 help If you say yes here you get support for the Analog Devices - ADT7410 and ADT7420 temperature monitoring chips. + ADT7410, ADT7420 and ADT7422 temperature monitoring chips. This driver can also be built as a module. If so, the module will be called adt7410. @@ -235,6 +224,7 @@ config SENSORS_ADT7462 config SENSORS_ADT7470 tristate "Analog Devices ADT7470" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the Analog Devices ADT7470 temperature monitoring chips. @@ -255,11 +245,12 @@ config SENSORS_ADT7475 will be called adt7475. config SENSORS_AHT10 - tristate "Aosong AHT10" + tristate "Aosong AHT10, AHT20, DHT20" depends on I2C + select CRC8 help - If you say yes here, you get support for the Aosong AHT10 - temperature and humidity sensors + If you say yes here, you get support for the Aosong AHT10, AHT20 and + DHT20 temperature and humidity sensors This driver can also be built as a module. If so, the module will be called aht10. @@ -300,6 +291,16 @@ config SENSORS_ASC7621 This driver can also be built as a module. If so, the module will be called asc7621. +config SENSORS_ASUS_ROG_RYUJIN + tristate "ASUS ROG RYUJIN II 360 hardware monitoring driver" + depends on HID + help + If you say yes here you get support for the fans and sensors of + the ASUS ROG RYUJIN II 360 AIO CPU liquid cooler. + + This driver can also be built as a module. If so, the module + will be called asus_rog_ryujin. + config SENSORS_AXI_FAN_CONTROL tristate "Analog Devices FAN Control HDL Core driver" help @@ -323,7 +324,7 @@ config SENSORS_K8TEMP config SENSORS_K10TEMP tristate "AMD Family 10h+ temperature sensor" - depends on X86 && PCI && AMD_NB + depends on X86 && PCI && AMD_NODE help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of @@ -334,6 +335,26 @@ config SENSORS_K10TEMP This driver can also be built as a module. If so, the module will be called k10temp. +config SENSORS_KBATT + tristate "KEBA battery controller support" + depends on KEBA_CP500 + help + This driver supports the battery monitoring controller found in + KEBA system FPGA devices. + + This driver can also be built as a module. If so, the module + will be called kbatt. + +config SENSORS_KFAN + tristate "KEBA fan controller support" + depends on KEBA_CP500 + help + This driver supports the fan controller found in KEBA system + FPGA devices. + + This driver can also be built as a module. If so, the module + will be called kfan. + config SENSORS_FAM15H_POWER tristate "AMD Family 15h processor power" depends on X86 && PCI && CPU_SUP_AMD @@ -411,6 +432,17 @@ config SENSORS_ASPEED This driver can also be built as a module. If so, the module will be called aspeed_pwm_tacho. +config SENSORS_ASPEED_G6 + tristate "ASPEED G6 PWM and Fan tach driver" + depends on ARCH_ASPEED || COMPILE_TEST + depends on PWM + help + This driver provides support for ASPEED G6 PWM and Fan Tach + controllers. + + This driver can also be built as a module. If so, the module + will be called aspeed_g6_pwm_tach. + config SENSORS_ATXP1 tristate "Attansic ATXP1 VID controller" depends on I2C @@ -451,6 +483,26 @@ config SENSORS_BT1_PVT_ALARMS the data conversion will be periodically performed and the data will be saved in the internal driver cache. +config SENSORS_CGBC + tristate "Congatec Board Controller Sensors" + depends on MFD_CGBC + help + Enable sensors support for the Congatec Board Controller. It has + temperature, voltage, current and fan sensors. + + This driver can also be built as a module. If so, the module will be + called cgbc-hwmon. + +config SENSORS_CHIPCAP2 + tristate "Amphenol ChipCap 2 relative humidity and temperature sensor" + depends on I2C + help + Say yes here to build support for the Amphenol ChipCap 2 + relative humidity and temperature sensor. + + To compile this driver as a module, choose M here: the module + will be called chipcap2. + config SENSORS_CORSAIR_CPRO tristate "Corsair Commander Pro controller" depends on HID @@ -474,6 +526,17 @@ config SENSORS_CORSAIR_PSU This driver can also be built as a module. If so, the module will be called corsair-psu. +config SENSORS_CROS_EC + tristate "ChromeOS Embedded Controller sensors" + depends on MFD_CROS_EC_DEV + default MFD_CROS_EC_DEV + help + If you say yes here you get support for ChromeOS Embedded Controller + sensors. + + This driver can also be built as a module. If so, the module + will be called cros_ec_hwmon. + config SENSORS_DRIVETEMP tristate "Hard disk drives with temperature sensors" depends on SCSI && ATA @@ -511,6 +574,7 @@ config SENSORS_DS1621 config SENSORS_DELL_SMM tristate "Dell laptop SMM BIOS hwmon driver" + depends on ACPI_WMI depends on X86 imply THERMAL help @@ -578,6 +642,7 @@ config SENSORS_SPARX5 config SENSORS_F71805F tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for hardware monitoring @@ -589,6 +654,7 @@ config SENSORS_F71805F config SENSORS_F71882FG tristate "Fintek F71882FG and compatibles" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for hardware monitoring @@ -634,6 +700,16 @@ config SENSORS_MC13783_ADC help Support for the A/D converter on MC13783 and MC13892 PMIC. +config SENSORS_MC33XS2410 + tristate "MC33XS2410 HWMON support" + depends on PWM_MC33XS2410 + help + If you say yes here you get hardware monitoring support for + MC33XS2410. + + This driver can also be built as a module. If so, the module + will be called mc33xs2410_hwmon. + config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" depends on (X86 || COMPILE_TEST) && I2C @@ -662,6 +738,16 @@ config SENSORS_FTSTEUTATES This driver can also be built as a module. If so, the module will be called ftsteutates. +config SENSORS_GIGABYTE_WATERFORCE + tristate "Gigabyte Waterforce X240/X280/X360 AIO CPU coolers" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + Gigabyte Waterforce X240/X280/X360 all-in-one CPU liquid coolers. + + This driver can also be built as a module. If so, the module + will be called gigabyte_waterforce. + config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C @@ -683,6 +769,16 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. +config SENSORS_GPD + tristate "GPD handhelds" + depends on X86 && DMI && HAS_IOPORT + help + If you say yes here you get support for fan readings and + control over GPD handheld devices. + + Can also be built as a module. In that case it will be + called gpd-fan. + config SENSORS_G760A tristate "GMT G760A" depends on I2C @@ -714,6 +810,15 @@ config SENSORS_GPIO_FAN This driver can also be built as a module. If so, the module will be called gpio-fan. +config SENSORS_GXP_FAN_CTRL + tristate "HPE GXP fan controller" + depends on ARCH_HPE_GXP || COMPILE_TEST + help + If you say yes here you get support for GXP fan control functionality. + + The GXP controls fan function via the CPLD through the use of PWM + registers. This driver reports status and pwm setting of the fans. + config SENSORS_HIH6130 tristate "Honeywell Humidicon HIH-6130 humidity/temperature sensor" depends on I2C @@ -724,6 +829,27 @@ config SENSORS_HIH6130 This driver can also be built as a module. If so, the module will be called hih6130. +config SENSORS_HS3001 + tristate "Renesas HS3001 humidity and temperature sensors" + depends on I2C + help + If you say yes here you get support for the Renesas HS3001, + to HS3004 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called hs3001. + +config SENSORS_HTU31 + tristate "Measurement Specialties HTU31 humidity and temperature sensor" + depends on I2C + select CRC8 + help + If you say yes here you get support for the HTU31 humidity + and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called htu31. + config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" select IPMI_SI @@ -790,8 +916,20 @@ config SENSORS_CORETEMP sensor inside your CPU. Most of the family 6 CPUs are supported. Check Documentation/hwmon/coretemp.rst for details. +config SENSORS_ISL28022 + tristate "Renesas ISL28022" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for ISL28022 power monitor. + Check Documentation/hwmon/isl28022.rst for details. + + This driver can also be built as a module. If so, the module + will be called isl28022. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -819,6 +957,16 @@ config SENSORS_JC42 This driver can also be built as a module. If so, the module will be called jc42. +config SENSORS_POWERZ + tristate "ChargerLAB POWER-Z USB-C tester" + depends on USB + help + If you say yes here you get support for ChargerLAB POWER-Z series of + USB-C charging testers. + + This driver can also be built as a module. If so, the module + will be called powerz. + config SENSORS_POWR1220 tristate "Lattice POWR1220 Power Monitoring" depends on I2C @@ -842,6 +990,16 @@ config SENSORS_LAN966X This driver can also be built as a module. If so, the module will be called lan966x-hwmon. +config SENSORS_LENOVO_EC + tristate "Sensor reader for Lenovo ThinkStations" + depends on X86 + help + If you say yes here you get support for LENOVO + EC Sensor data on newer ThinkStation systems + + This driver can also be built as a module. If so, the module + will be called lenovo_ec_sensors. + config SENSORS_LINEAGE tristate "Lineage Compact Power Line Power Entry Module" depends on I2C @@ -912,6 +1070,18 @@ config SENSORS_LTC2990 This driver can also be built as a module. If so, the module will be called ltc2990. +config SENSORS_LTC2991 + tristate "Analog Devices LTC2991" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Analog Devices LTC2991 + Octal I2C Voltage, Current, and Temperature Monitor. The LTC2991 + supports a combination of voltage, current and temperature monitoring. + + This driver can also be built as a module. If so, the module will + be called ltc2991. + config SENSORS_LTC2992 tristate "Linear Technology LTC2992" depends on I2C @@ -986,6 +1156,17 @@ config SENSORS_LTC4261 This driver can also be built as a module. If so, the module will be called ltc4261. +config SENSORS_LTC4282 + tristate "Analog Devices LTC4282" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Analog Devices LTC4282 + High Current Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4282. + config SENSORS_LTQ_CPUTEMP bool "Lantiq cpu temperature sensor driver" depends on SOC_XWAY @@ -993,6 +1174,18 @@ config SENSORS_LTQ_CPUTEMP If you say yes here you get support for the temperature sensor inside your CPU. +config SENSORS_MACSMC_HWMON + tristate "Apple SMC (Apple Silicon)" + depends on MFD_MACSMC && OF + help + This driver enables hwmon support for current, power, temperature, + and voltage sensors, as well as fan speed reporting and control + on Apple Silicon devices. Say Y here if you have an Apple Silicon + device. + + This driver can also be built as a module. If so, the module will + be called macsmc-hwmon. + config SENSORS_MAX1111 tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" depends on SPI_MASTER @@ -1040,6 +1233,7 @@ config SENSORS_MAX1619 config SENSORS_MAX1668 tristate "Maxim MAX1668 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for MAX1668, MAX1989 and MAX1805 chips. @@ -1088,6 +1282,17 @@ config SENSORS_MAX31760 This driver can also be built as a module. If so, the module will be called max31760. +config MAX31827 + tristate "MAX31827 low-power temperature switch and similar devices" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for MAX31827, MAX31828 and + MAX31829 low-power temperature switches and sensors connected with I2C. + + This driver can also be built as a module. If so, the module + will be called max31827. + config SENSORS_MAX6620 tristate "Maxim MAX6620 fan controller" depends on I2C @@ -1115,6 +1320,7 @@ config SENSORS_MAX6621 config SENSORS_MAX6639 tristate "Maxim MAX6639 sensor chip" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the MAX6639 sensor chips. @@ -1122,18 +1328,6 @@ config SENSORS_MAX6639 This driver can also be built as a module. If so, the module will be called max6639. -config SENSORS_MAX6642 - tristate "Maxim MAX6642 sensor chip" - depends on I2C - depends on SENSORS_LM90=n - help - If you say yes here you get support for MAX6642 sensor chip. - MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor - with Overtemperature Alarm from Maxim. - - This driver can also be built as a module. If so, the module - will be called max6642. - config SENSORS_MAX6650 tristate "Maxim MAX6650 sensor chip" depends on I2C @@ -1166,6 +1360,23 @@ config SENSORS_MAX31790 This driver can also be built as a module. If so, the module will be called max31790. +config SENSORS_MAX77705 + tristate "MAX77705 current and voltage sensor" + depends on MFD_MAX77705 + help + If you say yes here you get support for MAX77705 sensors connected with I2C. + + This driver can also be built as a module. If so, the module + will be called max77705-hwmon. + +config SENSORS_MC34VR500 + tristate "NXP MC34VR500 hardware monitoring driver" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the temperature and input + voltage sensors of the NXP MC34VR500. + config SENSORS_MCP3021 tristate "Microchip MCP3021 and compatibles" depends on I2C @@ -1283,7 +1494,9 @@ config SENSORS_LM73 config SENSORS_LM75 tristate "National Semiconductor LM75 and compatibles" depends on I2C + depends on I3C || !I3C select REGMAP_I2C + select REGMAP_I3C if I3C help If you say yes here you get support for one common type of temperature sensor chip, with models including: @@ -1388,7 +1601,7 @@ config SENSORS_LM90 MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, - Winbond/Nuvoton W83L771W/G/AWG/ASG, + Winbond/Nuvoton W83L771W/G/AWG/ASG, NCT7716, NCT7717 and NCT7718, Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 sensor chips. @@ -1398,9 +1611,10 @@ config SENSORS_LM90 config SENSORS_LM92 tristate "National Semiconductor LM92 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for National Semiconductor LM92 - and Maxim MAX6635 sensor chips. + and LM76 as well as Maxim MAX6633/6634/6635 sensor chips. This driver can also be built as a module. If so, the module will be called lm92. @@ -1419,6 +1633,7 @@ config SENSORS_LM93 config SENSORS_LM95234 tristate "National Semiconductor LM95234 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for the LM95233 and LM95234 temperature sensor chips. @@ -1449,6 +1664,7 @@ config SENSORS_LM95245 config SENSORS_PC87360 tristate "National Semiconductor PC87360 family" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -1463,6 +1679,7 @@ config SENSORS_PC87360 config SENSORS_PC87427 tristate "National Semiconductor PC87427" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get access to the hardware monitoring @@ -1490,10 +1707,11 @@ config SENSORS_NTC_THERMISTOR B57891S0103 from EPCOS. This driver can also be built as a module. If so, the module - will be called ntc-thermistor. + will be called ntc_thermistor. config SENSORS_NCT6683 tristate "Nuvoton NCT6683D" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the hardware monitoring @@ -1502,6 +1720,16 @@ config SENSORS_NCT6683 This driver can also be built as a module. If so, the module will be called nct6683. +config SENSORS_NCT6694 + tristate "Nuvoton NCT6694 Hardware Monitor support" + depends on MFD_NCT6694 + help + Say Y here to support Nuvoton NCT6694 hardware monitoring + functionality. + + This driver can also be built as a module. If so, the module + will be called nct6694-hwmon. + config SENSORS_NCT6775_CORE tristate select REGMAP @@ -1515,8 +1743,9 @@ config SENSORS_NCT6775_CORE config SENSORS_NCT6775 tristate "Platform driver for Nuvoton NCT6775F and compatibles" + depends on HAS_IOPORT depends on !PPC - depends on ACPI_WMI || ACPI_WMI=n + depends on ACPI || ACPI=n select HWMON_VID select SENSORS_NCT6775_CORE help @@ -1546,6 +1775,17 @@ config SENSORS_NCT6775_I2C This driver can also be built as a module. If so, the module will be called nct6775-i2c. +config SENSORS_NCT7363 + tristate "Nuvoton NCT7363Y" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the Nuvoton NCT7363Y + hardware monitoring chip. + + This driver can also be built as a module. If so, the module + will be called nct7363. + config SENSORS_NCT7802 tristate "Nuvoton NCT7802Y" depends on I2C @@ -1604,6 +1844,16 @@ config SENSORS_NZXT_KRAKEN2 This driver can also be built as a module. If so, the module will be called nzxt-kraken2. +config SENSORS_NZXT_KRAKEN3 + tristate "NZXT Kraken X53/X63/X73, Z53/Z63/Z73 coolers" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT Kraken X53/X63/X73, Z53/Z63/Z73 all-in-one CPU liquid coolers. + + This driver can also be built as a module. If so, the module + will be called nzxt-kraken3. + config SENSORS_NZXT_SMART2 tristate "NZXT RGB & Fan Controller/Smart Device v2" depends on USB_HID @@ -1616,17 +1866,6 @@ config SENSORS_NZXT_SMART2 source "drivers/hwmon/occ/Kconfig" -config SENSORS_OXP - tristate "OneXPlayer EC fan control" - depends on ACPI - depends on X86 - help - If you say yes here you get support for fan readings and control over - OneXPlayer handheld devices. Only OneXPlayer mini AMD handheld variant - boards are supported. - - Can also be built as a module. In that case it will be called oxp-sensors. - config SENSORS_PCF8591 tristate "Philips PCF8591 ADC/DAC" depends on I2C @@ -1644,9 +1883,19 @@ source "drivers/hwmon/peci/Kconfig" source "drivers/hwmon/pmbus/Kconfig" +config SENSORS_PT5161L + tristate "Astera Labs PT5161L PCIe retimer hardware monitoring" + depends on I2C + help + If you say yes here you get support for temperature monitoring + on the Astera Labs PT5161L PCIe retimer. + + This driver can also be built as a module. If so, the module + will be called pt5161l. + config SENSORS_PWM_FAN tristate "PWM fan" - depends on (PWM && OF) || COMPILE_TEST + depends on PWM || COMPILE_TEST depends on THERMAL || THERMAL=n help If you say yes here you get support for fans connected to PWM lines. @@ -1656,6 +1905,18 @@ config SENSORS_PWM_FAN This driver can also be built as a module. If so, the module will be called pwm-fan. +config SENSORS_QNAP_MCU_HWMON + tristate "QNAP MCU hardware monitoring" + depends on MFD_QNAP_MCU + depends on THERMAL || THERMAL=n + help + Say yes here to enable support for fan and temperature sensor + connected to a QNAP MCU, as found in a number of QNAP network + attached storage devices. + + This driver can also be built as a module. If so, the module + will be called qnap-mcu-hwmon. + config SENSORS_RASPBERRYPI_HWMON tristate "Raspberry Pi voltage monitor" depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) @@ -1666,6 +1927,16 @@ config SENSORS_RASPBERRYPI_HWMON This driver can also be built as a module. If so, the module will be called raspberrypi-hwmon. +config SENSORS_SA67MCU + tristate "Kontron sa67mcu hardware monitoring driver" + depends on MFD_SL28CPLD || COMPILE_TEST + help + If you say yes here you get support for the voltage and temperature + monitor of the sa67 board management controller. + + This driver can also be built as a module. If so, the module + will be called sa67mcu-hwmon. + config SENSORS_SL28CPLD tristate "Kontron sl28cpld hardware monitoring driver" depends on MFD_SL28CPLD || COMPILE_TEST @@ -1686,16 +1957,6 @@ config SENSORS_SBTSI This driver can also be built as a module. If so, the module will be called sbtsi_temp. -config SENSORS_SBRMI - tristate "Emulated SB-RMI sensor" - depends on I2C - help - If you say yes here you get support for emulated RMI - sensors on AMD SoCs with APML interface connected to a BMC device. - - This driver can also be built as a module. If so, the module will - be called sbrmi. - config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GPIOLIB || COMPILE_TEST @@ -1711,8 +1972,8 @@ config SENSORS_SHT21 tristate "Sensiron humidity and temperature sensors. SHT21 and compat." depends on I2C help - If you say yes here you get support for the Sensiron SHT21, SHT25 - humidity and temperature sensors. + If you say yes here you get support for the Sensiron SHT20, SHT21, + SHT25 humidity and temperature sensors. This driver can also be built as a module. If so, the module will be called sht21. @@ -1749,26 +2010,9 @@ config SENSORS_SHTC1 This driver can also be built as a module. If so, the module will be called shtc1. -config SENSORS_S3C - tristate "Samsung built-in ADC" - depends on S3C_ADC - help - If you say yes here you get support for the on-board ADCs of - the Samsung S3C24XX, S3C64XX and other series of SoC - - This driver can also be built as a module. If so, the module - will be called s3c-hwmon. - -config SENSORS_S3C_RAW - bool "Include raw channel attributes in sysfs" - depends on SENSORS_S3C - help - Say Y here if you want to include raw copies of all the ADC - channels in sysfs. - config SENSORS_SIS5595 tristate "Silicon Integrated Systems Corp. SiS5595" - depends on PCI + depends on PCI && HAS_IOPORT help If you say yes here you get support for the integrated sensors in SiS5595 South Bridges. @@ -1788,6 +2032,7 @@ config SENSORS_SY7636A config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" + depends on HAS_IOPORT depends on I2C && !PPC select HWMON_VID help @@ -1844,6 +2089,7 @@ config SENSORS_EMC6W201 config SENSORS_SMSC47M1 tristate "SMSC LPC47M10x and compatibles" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the integrated fan @@ -1878,6 +2124,7 @@ config SENSORS_SMSC47M192 config SENSORS_SMSC47B397 tristate "SMSC LPC47B397-NC" + depends on HAS_IOPORT depends on !PPC help If you say yes here you get support for the SMSC LPC47B397-NC @@ -1888,9 +2135,11 @@ config SENSORS_SMSC47B397 config SENSORS_SCH56XX_COMMON tristate + select REGMAP config SENSORS_SCH5627 tristate "SMSC SCH5627" + depends on HAS_IOPORT depends on !PPC && WATCHDOG select SENSORS_SCH56XX_COMMON select WATCHDOG_CORE @@ -1904,6 +2153,7 @@ config SENSORS_SCH5627 config SENSORS_SCH5636 tristate "SMSC SCH5636" + depends on HAS_IOPORT depends on !PPC && WATCHDOG select SENSORS_SCH56XX_COMMON select WATCHDOG_CORE @@ -1930,19 +2180,51 @@ config SENSORS_STTS751 This driver can also be built as a module. If so, the module will be called stts751. -config SENSORS_SMM665 - tristate "Summit Microelectronics SMM665" +config SENSORS_SFCTEMP + tristate "Starfive JH71x0 temperature sensor" + depends on ARCH_STARFIVE || COMPILE_TEST + help + If you say yes here you get support for temperature sensor + on the Starfive JH71x0 SoCs. + + This driver can also be built as a module. If so, the module + will be called sfctemp. + +config SENSORS_SG2042_MCU + tristate "Sophgo onboard MCU support" depends on I2C + depends on ARCH_SOPHGO || COMPILE_TEST help - If you say yes here you get support for the hardware monitoring - features of the Summit Microelectronics SMM665/SMM665B Six-Channel - Active DC Output Controller / Monitor. + Support for onboard MCU of Sophgo SG2042 SoCs. This mcu provides + power control and some basic information. - Other supported chips are SMM465, SMM665C, SMM764, and SMM766. - Support for those chips is untested. + This driver can be built as a module. If so, the module + will be called sg2042-mcu. - This driver can also be built as a module. If so, the module will - be called smm665. +config SENSORS_SURFACE_FAN + tristate "Surface Fan Driver" + depends on SURFACE_AGGREGATOR + depends on SURFACE_AGGREGATOR_BUS + help + Driver that provides monitoring of the fan on Surface Pro devices that + have a fan, like the Surface Pro 9. + + This makes the fan's current speed accessible through the hwmon + system. It does not provide control over the fan, the firmware is + responsible for that, this driver merely provides monitoring. + + Select M or Y here, if you want to be able to read the fan's speed. + +config SENSORS_SURFACE_TEMP + tristate "Microsoft Surface Thermal Sensor Driver" + depends on SURFACE_AGGREGATOR + depends on SURFACE_AGGREGATOR_BUS + help + Driver for monitoring thermal sensors connected via the Surface + Aggregator Module (embedded controller) on Microsoft Surface devices. + + This driver can also be built as a module. If so, the module + will be called surface_temp. config SENSORS_ADC128D818 tristate "Texas Instruments ADC128D818" @@ -1977,7 +2259,8 @@ config SENSORS_ADS7871 config SENSORS_AMC6821 tristate "Texas Instruments AMC6821" - depends on I2C + depends on I2C + select REGMAP_I2C help If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. @@ -2001,22 +2284,24 @@ config SENSORS_INA2XX select REGMAP_I2C help If you say yes here you get support for INA219, INA220, INA226, - INA230, and INA231 power monitor chips. + INA230, INA231, INA260, and SY24655 power monitor chips. The INA2xx driver is configured for the default configuration of the part as described in the datasheet. - Default value for Rshunt is 10 mOhms. + Default value for Rshunt is 10 mOhms except for INA260 which has an + internal 2 mOhm shunt resistor. This driver can also be built as a module. If so, the module will be called ina2xx. config SENSORS_INA238 - tristate "Texas Instruments INA238" + tristate "Texas Instruments INA238 and compatibles" depends on I2C select REGMAP_I2C help - If you say yes here you get support for the INA238 power monitor - chip. This driver supports voltage, current, power and temperature - measurements as well as alarm configuration. + If you say yes here you get support for INA228, INA237, INA238, + INA700, INA780, and SQ52206 power monitor chips. This driver supports + voltage, current, power, energy, and temperature measurements as well + as alarm configuration. This driver can also be built as a module. If so, the module will be called ina238. @@ -2032,6 +2317,37 @@ config SENSORS_INA3221 This driver can also be built as a module. If so, the module will be called ina3221. +config SENSORS_SPD5118 + tristate "SPD5118 Compliant Temperature Sensors" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for SPD5118 (JEDEC JESD300) + compliant temperature sensors. Such sensors are found on DDR5 memory + modules. + + This driver can also be built as a module. If so, the module + will be called spd5118. + +config SENSORS_SPD5118_DETECT + bool "Enable detect function" + depends on SENSORS_SPD5118 + default (!DMI || !X86) + help + If enabled, the driver auto-detects if a chip in the SPD address + range is compliant to the SPD51888 standard and auto-instantiates + if that is the case. If disabled, SPD5118 compliant devices have + to be instantiated by other means. On X86 systems with DMI support + this will typically be done from DMI DDR detection code in the + I2C SMBus subsystem. Devicetree based systems will instantiate + attached devices if the DIMMs are listed in the devicetree file. + + Disabling the detect function will speed up boot time and reduce + the risk of mis-detecting SPD5118 compliant devices. However, it + may result in missed DIMMs under some circumstances. + + If unsure, say Y. + config SENSORS_TC74 tristate "Microchip TC74" depends on I2C @@ -2077,10 +2393,12 @@ config SENSORS_TMP103 config SENSORS_TMP108 tristate "Texas Instruments TMP108" depends on I2C + depends on I3C || !I3C select REGMAP_I2C + select REGMAP_I3C if I3C help If you say yes here you get support for Texas Instruments TMP108 - sensor chips. + sensor chips and NXP P3T1085. This driver can also be built as a module. If so, the module will be called tmp108. @@ -2120,6 +2438,7 @@ config SENSORS_TMP464 config SENSORS_TMP513 tristate "Texas Instruments TMP513 and compatibles" depends on I2C + select REGMAP_I2C help If you say yes here you get support for Texas Instruments TMP512, and TMP513 temperature and power supply sensor chips. @@ -2127,6 +2446,18 @@ config SENSORS_TMP513 This driver can also be built as a module. If so, the module will be called tmp513. +config SENSORS_TSC1641 + tristate "ST Microelectronics TSC1641 Power Monitor" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for TSC1641 power monitor chip. + The TSC1641 driver is configured for the default configuration of + the part except temperature is enabled by default. + + This driver can also be built as a module. If so, the module + will be called tsc1641. + config SENSORS_VEXPRESS tristate "Versatile Express" depends on VEXPRESS_CONFIG @@ -2146,7 +2477,7 @@ config SENSORS_VIA_CPUTEMP config SENSORS_VIA686A tristate "VIA686A" - depends on PCI + depends on PCI && HAS_IOPORT help If you say yes here you get support for the integrated sensors in Via 686A/B South Bridges. @@ -2156,6 +2487,7 @@ config SENSORS_VIA686A config SENSORS_VT1211 tristate "VIA VT1211" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -2167,7 +2499,7 @@ config SENSORS_VT1211 config SENSORS_VT8231 tristate "VIA VT8231" - depends on PCI + depends on PCI && HAS_IOPORT select HWMON_VID help If you say yes here then you get support for the integrated sensors @@ -2275,6 +2607,7 @@ config SENSORS_W83L786NG config SENSORS_W83627HF tristate "Winbond W83627HF, W83627THF, W83637HF, W83687THF, W83697HF" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -2287,6 +2620,7 @@ config SENSORS_W83627HF config SENSORS_W83627EHF tristate "Winbond W83627EHF/EHG/DHG/UHG, W83667HG" + depends on HAS_IOPORT depends on !PPC select HWMON_VID help @@ -2341,7 +2675,7 @@ config SENSORS_XGENE config SENSORS_INTEL_M10_BMC_HWMON tristate "Intel MAX10 BMC Hardware Monitoring" - depends on MFD_INTEL_M10_BMC + depends on MFD_INTEL_M10_BMC_CORE help This driver provides support for the hardware monitoring functionality on Intel MAX10 BMC chip. @@ -2391,15 +2725,29 @@ config SENSORS_ASUS_WMI config SENSORS_ASUS_EC tristate "ASUS EC Sensors" depends on X86 + depends on ACPI_EC help If you say yes here you get support for the ACPI embedded controller - hardware monitoring interface found in ASUS motherboards. The driver - currently supports B550/X570 boards, although other ASUS boards might - provide this monitoring interface as well. + hardware monitoring interface found in some ASUS motherboards. This is + where such sensors as water flow and temperature, optional fans, and + additional temperature sensors (T_Sensor, chipset temperatures) + find themselves. This driver can also be built as a module. If so, the module will be called asus_ec_sensors. +config SENSORS_HP_WMI + tristate "HP WMI Sensors" + depends on ACPI_WMI + help + If you say yes here you get support for the ACPI hardware monitoring + interface found in HP (and some HP Compaq) business-class computers. + Available sensors vary between systems. Temperature and fan speed + sensors are the most common. + + This driver can also be built as a module. If so, the module + will be called hp_wmi_sensors. + endif # ACPI endif # HWMON |