diff options
Diffstat (limited to 'drivers/hwmon/it87.c')
| -rw-r--r-- | drivers/hwmon/it87.c | 201 |
1 files changed, 122 insertions, 79 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 5deff5e5f693..e233aafa8856 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -117,7 +117,7 @@ static inline void superio_select(int ioreg, int ldn) outb(ldn, ioreg + 1); } -static inline int superio_enter(int ioreg) +static inline int superio_enter(int ioreg, bool noentry) { /* * Try to reserve ioreg and ioreg + 1 for exclusive access. @@ -125,7 +125,8 @@ static inline int superio_enter(int ioreg) if (!request_muxed_region(ioreg, 2, DRVNAME)) return -EBUSY; - __superio_enter(ioreg); + if (!noentry) + __superio_enter(ioreg); return 0; } @@ -221,6 +222,10 @@ static bool fix_pwm_polarity; * Super-I/O configuration space. */ #define IT87_REG_VID 0x0a + +/* Interface Selection register on other chips */ +#define IT87_REG_IFSEL 0x0a + /* * The IT8705F and IT8712F earlier than revision 0x08 use register 0x0b * for fan divisors. Later IT8712F revisions must use 16-bit tachometer @@ -316,7 +321,7 @@ struct it87_devices { * second SIO address. Never exit configuration mode on these * chips to avoid the problem. */ -#define FEAT_CONF_NOEXIT BIT(19) /* Chip should not exit conf mode */ +#define FEAT_NOCONF BIT(19) /* Chip conf mode enabled on startup */ #define FEAT_FOUR_FANS BIT(20) /* Supports four fans */ #define FEAT_FOUR_PWM BIT(21) /* Supports four fan controls */ #define FEAT_FOUR_TEMP BIT(22) @@ -448,7 +453,7 @@ static const struct it87_devices it87_devices[] = { .model = "IT8790E", .features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_IN7_INTERNAL - | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF | FEAT_CONF_NOEXIT, + | FEAT_PWM_FREQ2 | FEAT_FANCTL_ONOFF | FEAT_NOCONF, .peci_mask = 0x07, }, [it8792] = { @@ -457,7 +462,7 @@ static const struct it87_devices it87_devices[] = { .features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI | FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF - | FEAT_CONF_NOEXIT, + | FEAT_NOCONF, .peci_mask = 0x07, .old_peci_mask = 0x02, /* Actually reports PCH */ }, @@ -503,7 +508,7 @@ static const struct it87_devices it87_devices[] = { .features = FEAT_NEWER_AUTOPWM | FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI | FEAT_10_9MV_ADC | FEAT_IN7_INTERNAL | FEAT_FANCTL_ONOFF - | FEAT_CONF_NOEXIT, + | FEAT_NOCONF, .peci_mask = 0x07, .old_peci_mask = 0x02, /* Actually reports PCH */ }, @@ -540,7 +545,7 @@ static const struct it87_devices it87_devices[] = { #define has_four_temp(data) ((data)->features & FEAT_FOUR_TEMP) #define has_six_temp(data) ((data)->features & FEAT_SIX_TEMP) #define has_vin3_5v(data) ((data)->features & FEAT_VIN3_5V) -#define has_conf_noexit(data) ((data)->features & FEAT_CONF_NOEXIT) +#define has_noconf(data) ((data)->features & FEAT_NOCONF) #define has_scaling(data) ((data)->features & (FEAT_12MV_ADC | \ FEAT_10_9MV_ADC)) #define has_fanctl_onoff(data) ((data)->features & FEAT_FANCTL_ONOFF) @@ -738,13 +743,13 @@ static int smbus_disable(struct it87_data *data) int err; if (data->smbus_bitmap) { - err = superio_enter(data->sioaddr); + err = superio_enter(data->sioaddr, has_noconf(data)); if (err) return err; superio_select(data->sioaddr, PME); superio_outb(data->sioaddr, IT87_SPECIAL_CFG_REG, data->ec_special_config & ~data->smbus_bitmap); - superio_exit(data->sioaddr, has_conf_noexit(data)); + superio_exit(data->sioaddr, has_noconf(data)); } return 0; } @@ -754,14 +759,14 @@ static int smbus_enable(struct it87_data *data) int err; if (data->smbus_bitmap) { - err = superio_enter(data->sioaddr); + err = superio_enter(data->sioaddr, has_noconf(data)); if (err) return err; superio_select(data->sioaddr, PME); superio_outb(data->sioaddr, IT87_SPECIAL_CFG_REG, data->ec_special_config); - superio_exit(data->sioaddr, has_conf_noexit(data)); + superio_exit(data->sioaddr, has_noconf(data)); } return 0; } @@ -1159,28 +1164,66 @@ static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 3, 0); static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 4, 0); static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 5, 0); +static int get_temp_type(struct it87_data *data, int index) +{ + /* + * 2 is deprecated; + * 3 = thermal diode; + * 4 = thermistor; + * 5 = AMDTSI; + * 6 = Intel PECI; + * 0 = disabled + */ + u8 reg, extra; + int ttype, type = 0; + + /* Detect PECI vs. AMDTSI */ + ttype = 6; + if ((has_temp_peci(data, index)) || data->type == it8721 || + data->type == it8720) { + extra = it87_read_value(data, IT87_REG_IFSEL); + if ((extra & 0x70) == 0x40) + ttype = 5; + } + + reg = it87_read_value(data, IT87_REG_TEMP_ENABLE); + + /* Per chip special detection */ + switch (data->type) { + case it8622: + if (!(reg & 0xc0) && index == 3) + type = ttype; + break; + default: + break; + } + + if (type || index >= 3) + return type; + + extra = it87_read_value(data, IT87_REG_TEMP_EXTRA); + + if ((has_temp_peci(data, index) && (reg >> 6 == index + 1)) || + (has_temp_old_peci(data, index) && (extra & 0x80))) + type = ttype; /* Intel PECI or AMDTSI */ + else if (reg & BIT(index)) + type = 3; /* thermal diode */ + else if (reg & BIT(index + 3)) + type = 4; /* thermistor */ + + return type; +} + static ssize_t show_temp_type(struct device *dev, struct device_attribute *attr, char *buf) { struct sensor_device_attribute *sensor_attr = to_sensor_dev_attr(attr); - int nr = sensor_attr->index; struct it87_data *data = it87_update_device(dev); - u8 reg, extra; if (IS_ERR(data)) return PTR_ERR(data); - reg = data->sensor; /* In case value is updated while used */ - extra = data->extra; - - if ((has_temp_peci(data, nr) && (reg >> 6 == nr + 1)) || - (has_temp_old_peci(data, nr) && (extra & 0x80))) - return sprintf(buf, "6\n"); /* Intel PECI */ - if (reg & (1 << nr)) - return sprintf(buf, "3\n"); /* thermal diode */ - if (reg & (8 << nr)) - return sprintf(buf, "4\n"); /* thermistor */ - return sprintf(buf, "0\n"); /* disabled */ + return sprintf(buf, "%d\n", get_temp_type(data, sensor_attr->index)); } static ssize_t set_temp_type(struct device *dev, struct device_attribute *attr, @@ -2313,6 +2356,12 @@ static umode_t it87_temp_is_visible(struct kobject *kobj, if (!(data->has_temp & BIT(i))) return 0; + if (a == 3) { + if (get_temp_type(data, i) == 0) + return 0; + return attr->mode; + } + if (a == 5 && !has_temp_offset(data)) return 0; @@ -2618,6 +2667,27 @@ static const struct attribute_group it87_group_auto_pwm = { .is_visible = it87_auto_pwm_is_visible, }; +/* + * Original explanation: + * On various Gigabyte AM4 boards (AB350, AX370), the second Super-IO chip + * (IT8792E) needs to be in configuration mode before accessing the first + * due to a bug in IT8792E which otherwise results in LPC bus access errors. + * This needs to be done before accessing the first Super-IO chip since + * the second chip may have been accessed prior to loading this driver. + * + * The problem is also reported to affect IT8795E, which is used on X299 boards + * and has the same chip ID as IT8792E (0x8733). It also appears to affect + * systems with IT8790E, which is used on some Z97X-Gaming boards as well as + * Z87X-OC. + * + * From other information supplied: + * ChipIDs 0x8733, 0x8695 (early ID for IT87952E) and 0x8790 are initialized + * and left in configuration mode, and entering and/or exiting configuration + * mode is what causes the crash. + * + * The recommendation is to look up the chipID before doing any mode swap + * and then act accordingly. + */ /* SuperIO detection - will change isa_address if a chip is found */ static int __init it87_find(int sioaddr, unsigned short *address, struct it87_sio_data *sio_data, int chip_cnt) @@ -2625,16 +2695,25 @@ static int __init it87_find(int sioaddr, unsigned short *address, int err; u16 chip_type; const struct it87_devices *config = NULL; + bool enabled = false; - err = superio_enter(sioaddr); + /* First step, lock memory but don't enter configuration mode */ + err = superio_enter(sioaddr, true); if (err) return err; err = -ENODEV; chip_type = superio_inw(sioaddr, DEVID); - /* check first for a valid chip before forcing chip id */ - if (chip_type == 0xffff) - goto exit; + /* Check for a valid chip before forcing chip id */ + if (chip_type == 0xffff) { + /* Enter configuration mode */ + __superio_enter(sioaddr); + enabled = true; + /* and then try again */ + chip_type = superio_inw(sioaddr, DEVID); + if (chip_type == 0xffff) + goto exit; + } if (force_id_cnt == 1) { /* If only one value given use for all chips */ @@ -2718,6 +2797,18 @@ static int __init it87_find(int sioaddr, unsigned short *address, config = &it87_devices[sio_data->type]; + /* + * If previously we didn't enter configuration mode and it isn't a + * chip we know is initialised in configuration mode, then enter + * configuration mode. + * + * I don't know if any such chips can exist but be defensive. + */ + if (!enabled && !has_noconf(config)) { + __superio_enter(sioaddr); + enabled = true; + } + superio_select(sioaddr, PME); if (!(superio_inb(sioaddr, IT87_ACT_REG) & 0x01)) { pr_info("Device (chip %s ioreg 0x%x) not activated, skipping\n", @@ -3095,7 +3186,7 @@ static int __init it87_find(int sioaddr, unsigned short *address, } exit: - superio_exit(sioaddr, config ? has_conf_noexit(config) : false); + superio_exit(sioaddr, !enabled); return err; } @@ -3472,7 +3563,7 @@ static void it87_resume_sio(struct platform_device *pdev) if (!data->need_in7_reroute) return; - err = superio_enter(data->sioaddr); + err = superio_enter(data->sioaddr, has_noconf(data)); if (err) { dev_warn(&pdev->dev, "Unable to enter Super I/O to reroute in7 (%d)", @@ -3492,7 +3583,7 @@ static void it87_resume_sio(struct platform_device *pdev) reg2c); } - superio_exit(data->sioaddr, has_conf_noexit(data)); + superio_exit(data->sioaddr, has_noconf(data)); } static int it87_resume(struct device *dev) @@ -3593,27 +3684,6 @@ static int it87_dmi_cb(const struct dmi_system_id *dmi_entry) } /* - * On various Gigabyte AM4 boards (AB350, AX370), the second Super-IO chip - * (IT8792E) needs to be in configuration mode before accessing the first - * due to a bug in IT8792E which otherwise results in LPC bus access errors. - * This needs to be done before accessing the first Super-IO chip since - * the second chip may have been accessed prior to loading this driver. - * - * The problem is also reported to affect IT8795E, which is used on X299 boards - * and has the same chip ID as IT8792E (0x8733). It also appears to affect - * systems with IT8790E, which is used on some Z97X-Gaming boards as well as - * Z87X-OC. - * DMI entries for those systems will be added as they become available and - * as the problem is confirmed to affect those boards. - */ -static int it87_sio_force(const struct dmi_system_id *dmi_entry) -{ - __superio_enter(REG_4E); - - return it87_dmi_cb(dmi_entry); -}; - -/* * On the Shuttle SN68PT, FAN_CTL2 is apparently not * connected to a fan, but to something else. One user * has reported instant system power-off when changing @@ -3635,34 +3705,7 @@ static struct it87_dmi_data nvidia_fn68pt = { .driver_data = data, \ } -#define IT87_DMI_MATCH_GBT(name, cb, data) \ - IT87_DMI_MATCH_VND("Gigabyte Technology Co., Ltd.", name, cb, data) - static const struct dmi_system_id it87_dmi_table[] __initconst = { - IT87_DMI_MATCH_GBT("AB350", it87_sio_force, NULL), - /* ? + IT8792E/IT8795E */ - IT87_DMI_MATCH_GBT("AX370", it87_sio_force, NULL), - /* ? + IT8792E/IT8795E */ - IT87_DMI_MATCH_GBT("Z97X-Gaming G1", it87_sio_force, NULL), - /* ? + IT8790E */ - IT87_DMI_MATCH_GBT("TRX40 AORUS XTREME", it87_sio_force, NULL), - /* IT8688E + IT8792E/IT8795E */ - IT87_DMI_MATCH_GBT("Z390 AORUS ULTRA-CF", it87_sio_force, NULL), - /* IT8688E + IT8792E/IT8795E */ - IT87_DMI_MATCH_GBT("B550 AORUS PRO AC", it87_sio_force, NULL), - /* IT8688E + IT8792E/IT8795E */ - IT87_DMI_MATCH_GBT("X570 AORUS MASTER", it87_sio_force, NULL), - /* IT8688E + IT8792E/IT8795E */ - IT87_DMI_MATCH_GBT("X570 AORUS PRO", it87_sio_force, NULL), - /* IT8688E + IT8792E/IT8795E */ - IT87_DMI_MATCH_GBT("X570 AORUS PRO WIFI", it87_sio_force, NULL), - /* IT8688E + IT8792E/IT8795E */ - IT87_DMI_MATCH_GBT("X570S AERO G", it87_sio_force, NULL), - /* IT8689E + IT87952E */ - IT87_DMI_MATCH_GBT("Z690 AORUS PRO DDR4", it87_sio_force, NULL), - /* IT8689E + IT87952E */ - IT87_DMI_MATCH_GBT("Z690 AORUS PRO", it87_sio_force, NULL), - /* IT8689E + IT87952E */ IT87_DMI_MATCH_VND("nVIDIA", "FN68PT", it87_dmi_cb, &nvidia_fn68pt), { } |
