diff options
Diffstat (limited to 'drivers/hwmon/pmbus/ucd9000.c')
| -rw-r--r-- | drivers/hwmon/pmbus/ucd9000.c | 102 |
1 files changed, 21 insertions, 81 deletions
diff --git a/drivers/hwmon/pmbus/ucd9000.c b/drivers/hwmon/pmbus/ucd9000.c index 3daaf2237832..55e7af3a5f98 100644 --- a/drivers/hwmon/pmbus/ucd9000.c +++ b/drivers/hwmon/pmbus/ucd9000.c @@ -10,7 +10,7 @@ #include <linux/delay.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/of_device.h> +#include <linux/of.h> #include <linux/init.h> #include <linux/err.h> #include <linux/slab.h> @@ -67,7 +67,6 @@ struct ucd9000_data { struct gpio_chip gpio; #endif struct dentry *debugfs; - ktime_t write_time; }; #define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) @@ -80,68 +79,11 @@ struct ucd9000_debugfs_entry { * It has been observed that the UCD90320 randomly fails register access when * doing another access right on the back of a register write. To mitigate this * make sure that there is a minimum delay between a write access and the - * following access. The 250us is based on experimental data. At a delay of - * 200us the issue seems to go away. Add a bit of extra margin to allow for + * following access. The 500 is based on experimental data. At a delay of + * 350us the issue seems to go away. Add a bit of extra margin to allow for * system to system differences. */ -#define UCD90320_WAIT_DELAY_US 250 - -static inline void ucd90320_wait(const struct ucd9000_data *data) -{ - s64 delta = ktime_us_delta(ktime_get(), data->write_time); - - if (delta < UCD90320_WAIT_DELAY_US) - udelay(UCD90320_WAIT_DELAY_US - delta); -} - -static int ucd90320_read_word_data(struct i2c_client *client, int page, - int phase, int reg) -{ - const struct pmbus_driver_info *info = pmbus_get_driver_info(client); - struct ucd9000_data *data = to_ucd9000_data(info); - - if (reg >= PMBUS_VIRT_BASE) - return -ENXIO; - - ucd90320_wait(data); - return pmbus_read_word_data(client, page, phase, reg); -} - -static int ucd90320_read_byte_data(struct i2c_client *client, int page, int reg) -{ - const struct pmbus_driver_info *info = pmbus_get_driver_info(client); - struct ucd9000_data *data = to_ucd9000_data(info); - - ucd90320_wait(data); - return pmbus_read_byte_data(client, page, reg); -} - -static int ucd90320_write_word_data(struct i2c_client *client, int page, - int reg, u16 word) -{ - const struct pmbus_driver_info *info = pmbus_get_driver_info(client); - struct ucd9000_data *data = to_ucd9000_data(info); - int ret; - - ucd90320_wait(data); - ret = pmbus_write_word_data(client, page, reg, word); - data->write_time = ktime_get(); - - return ret; -} - -static int ucd90320_write_byte(struct i2c_client *client, int page, u8 value) -{ - const struct pmbus_driver_info *info = pmbus_get_driver_info(client); - struct ucd9000_data *data = to_ucd9000_data(info); - int ret; - - ucd90320_wait(data); - ret = pmbus_write_byte(client, page, value); - data->write_time = ktime_get(); - - return ret; -} +#define UCD90320_WAIT_DELAY_US 500 static int ucd9000_get_fan_config(struct i2c_client *client, int fan) { @@ -270,8 +212,8 @@ static int ucd9000_gpio_get(struct gpio_chip *gc, unsigned int offset) return !!(ret & UCD9000_GPIO_CONFIG_STATUS); } -static void ucd9000_gpio_set(struct gpio_chip *gc, unsigned int offset, - int value) +static int ucd9000_gpio_set(struct gpio_chip *gc, unsigned int offset, + int value) { struct i2c_client *client = gpiochip_get_data(gc); int ret; @@ -280,19 +222,19 @@ static void ucd9000_gpio_set(struct gpio_chip *gc, unsigned int offset, if (ret < 0) { dev_dbg(&client->dev, "failed to read GPIO %d config: %d\n", offset, ret); - return; + return ret; } if (value) { - if (ret & UCD9000_GPIO_CONFIG_STATUS) - return; + if (ret & UCD9000_GPIO_CONFIG_OUT_VALUE) + return 0; - ret |= UCD9000_GPIO_CONFIG_STATUS; + ret |= UCD9000_GPIO_CONFIG_OUT_VALUE; } else { - if (!(ret & UCD9000_GPIO_CONFIG_STATUS)) - return; + if (!(ret & UCD9000_GPIO_CONFIG_OUT_VALUE)) + return 0; - ret &= ~UCD9000_GPIO_CONFIG_STATUS; + ret &= ~UCD9000_GPIO_CONFIG_OUT_VALUE; } ret |= UCD9000_GPIO_CONFIG_ENABLE; @@ -302,7 +244,7 @@ static void ucd9000_gpio_set(struct gpio_chip *gc, unsigned int offset, if (ret < 0) { dev_dbg(&client->dev, "Failed to write GPIO %d config: %d\n", offset, ret); - return; + return ret; } ret &= ~UCD9000_GPIO_CONFIG_ENABLE; @@ -311,6 +253,8 @@ static void ucd9000_gpio_set(struct gpio_chip *gc, unsigned int offset, if (ret < 0) dev_dbg(&client->dev, "Failed to write GPIO %d config: %d\n", offset, ret); + + return ret; } static int ucd9000_gpio_get_direction(struct gpio_chip *gc, @@ -512,8 +456,6 @@ static int ucd9000_init_debugfs(struct i2c_client *client, return -ENOENT; data->debugfs = debugfs_create_dir(client->name, debugfs); - if (!data->debugfs) - return -ENOENT; /* * Of the chips this driver supports, only the UCD9090, UCD90160, @@ -590,7 +532,7 @@ static int ucd9000_probe(struct i2c_client *client) } if (client->dev.of_node) - chip = (enum chips)of_device_get_match_data(&client->dev); + chip = (uintptr_t)of_device_get_match_data(&client->dev); else chip = mid->driver_data; @@ -669,10 +611,8 @@ static int ucd9000_probe(struct i2c_client *client) info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34; } else if (mid->driver_data == ucd90320) { - info->read_byte_data = ucd90320_read_byte_data; - info->read_word_data = ucd90320_read_word_data; - info->write_byte = ucd90320_write_byte; - info->write_word_data = ucd90320_write_word_data; + /* Delay SMBus operations after a write */ + info->write_delay = UCD90320_WAIT_DELAY_US; } ucd9000_probe_gpio(client, mid, data); @@ -695,7 +635,7 @@ static struct i2c_driver ucd9000_driver = { .name = "ucd9000", .of_match_table = of_match_ptr(ucd9000_of_match), }, - .probe_new = ucd9000_probe, + .probe = ucd9000_probe, .id_table = ucd9000_id, }; @@ -704,4 +644,4 @@ module_i2c_driver(ucd9000_driver); MODULE_AUTHOR("Guenter Roeck"); MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx"); MODULE_LICENSE("GPL"); -MODULE_IMPORT_NS(PMBUS); +MODULE_IMPORT_NS("PMBUS"); |