diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-ali15x3.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-ali15x3.c | 56 |
1 files changed, 26 insertions, 30 deletions
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 26bcc6127cee..418d11266671 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -1,21 +1,9 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* Copyright (c) 1999 Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock <phil@netroedge.com> and Mark D. Studebaker <mdsxyz123@yahoo.com> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* @@ -51,7 +39,7 @@ We make sure that the SMB is enabled. We leave the ACPI alone. This driver controls the SMB Host only. - The SMB Slave controller on the M15X3 is not enabled. + The SMB Target controller on the M15X3 is not enabled. This driver does not use interrupts. */ @@ -65,7 +53,6 @@ #include <linux/ioport.h> #include <linux/delay.h> #include <linux/i2c.h> -#include <linux/init.h> #include <linux/acpi.h> #include <linux/io.h> @@ -124,7 +111,7 @@ /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ static u16 force_addr; -module_param(force_addr, ushort, 0); +module_param_hw(force_addr, ushort, ioport, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); @@ -178,14 +165,15 @@ static int ali15x3_setup(struct pci_dev *ALI15X3_dev) } if(force_addr) { + int ret; + dev_info(&ALI15X3_dev->dev, "forcing ISA address 0x%04X\n", ali15x3_smba); - if (PCIBIOS_SUCCESSFUL != pci_write_config_word(ALI15X3_dev, - SMBBA, - ali15x3_smba)) + ret = pci_write_config_word(ALI15X3_dev, SMBBA, ali15x3_smba); + if (ret != PCIBIOS_SUCCESSFUL) goto error; - if (PCIBIOS_SUCCESSFUL != pci_read_config_word(ALI15X3_dev, - SMBBA, &a)) + ret = pci_read_config_word(ALI15X3_dev, SMBBA, &a); + if (ret != PCIBIOS_SUCCESSFUL) goto error; if ((a & ~(ALI15X3_SMB_IOSIZE - 1)) != ali15x3_smba) { /* make sure it works */ @@ -306,10 +294,8 @@ static int ali15x3_transaction(struct i2c_adapter *adap) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout > MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) result = -ETIMEDOUT; - dev_err(&adap->dev, "SMBus Timeout!\n"); - } if (temp & ALI15X3_STS_TERM) { result = -EIO; @@ -473,11 +459,11 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, + .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; -static DEFINE_PCI_DEVICE_TABLE(ali15x3_ids) = { +static const struct pci_device_id ali15x3_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) }, { 0, } }; @@ -486,6 +472,8 @@ MODULE_DEVICE_TABLE (pci, ali15x3_ids); static int ali15x3_probe(struct pci_dev *dev, const struct pci_device_id *id) { + int ret; + if (ali15x3_setup(dev)) { dev_err(&dev->dev, "ALI15X3 not detected, module not inserted.\n"); @@ -497,7 +485,15 @@ static int ali15x3_probe(struct pci_dev *dev, const struct pci_device_id *id) snprintf(ali15x3_adapter.name, sizeof(ali15x3_adapter.name), "SMBus ALI15X3 adapter at %04x", ali15x3_smba); - return i2c_add_adapter(&ali15x3_adapter); + ret = i2c_add_adapter(&ali15x3_adapter); + if (ret) + goto release_region; + + return 0; + +release_region: + release_region(ali15x3_smba, ALI15X3_SMB_IOSIZE); + return ret; } static void ali15x3_remove(struct pci_dev *dev) @@ -515,8 +511,8 @@ static struct pci_driver ali15x3_driver = { module_pci_driver(ali15x3_driver); -MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, " - "Philip Edelbrock <phil@netroedge.com>, " - "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); +MODULE_AUTHOR("Philip Edelbrock <phil@netroedge.com>"); +MODULE_AUTHOR("Mark D. Studebaker <mdsxyz123@yahoo.com>"); MODULE_DESCRIPTION("ALI15X3 SMBus driver"); MODULE_LICENSE("GPL"); |