diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-cht-wc.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-cht-wc.c | 193 |
1 files changed, 157 insertions, 36 deletions
diff --git a/drivers/i2c/busses/i2c-cht-wc.c b/drivers/i2c/busses/i2c-cht-wc.c index 1cf68f85b2e1..606ac071cb80 100644 --- a/drivers/i2c/busses/i2c-cht-wc.c +++ b/drivers/i2c/busses/i2c-cht-wc.c @@ -1,6 +1,6 @@ // SPDX-License-Identifier: GPL-2.0-or-later /* - * Intel CHT Whiskey Cove PMIC I2C Master driver + * Intel CHT Whiskey Cove PMIC I2C controller driver * Copyright (C) 2017 Hans de Goede <hdegoede@redhat.com> * * Based on various non upstream patches to support the CHT Whiskey Cove PMIC: @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/power/bq24190_charger.h> +#include <linux/power/bq25890_charger.h> #include <linux/slab.h> #define CHT_WC_I2C_CTRL 0x5e24 @@ -99,20 +100,13 @@ static irqreturn_t cht_wc_i2c_adap_thread_handler(int id, void *data) * interrupt handler as well, so running the client irq handler from * this thread will cause things to lock up. */ - if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) { - /* - * generic_handle_irq expects local IRQs to be disabled - * as normally it is called from interrupt context. - */ - local_irq_disable(); - generic_handle_irq(adap->client_irq); - local_irq_enable(); - } + if (reg & CHT_WC_EXTCHGRIRQ_CLIENT_IRQ) + generic_handle_irq_safe(adap->client_irq); return IRQ_HANDLED; } -static u32 cht_wc_i2c_adap_master_func(struct i2c_adapter *adap) +static u32 cht_wc_i2c_adap_func(struct i2c_adapter *adap) { /* This i2c adapter only supports SMBUS byte transfers */ return I2C_FUNC_SMBUS_BYTE_DATA; @@ -174,7 +168,7 @@ static int cht_wc_i2c_adap_smbus_xfer(struct i2c_adapter *_adap, u16 addr, } static const struct i2c_algorithm cht_wc_i2c_adap_algo = { - .functionality = cht_wc_i2c_adap_master_func, + .functionality = cht_wc_i2c_adap_func, .smbus_xfer = cht_wc_i2c_adap_smbus_xfer, }; @@ -270,6 +264,7 @@ static const struct irq_chip cht_wc_i2c_irq_chip = { .name = "cht_wc_ext_chrg_irq_chip", }; +/********** GPD Win / Pocket charger IC settings **********/ static const char * const bq24190_suppliers[] = { "tcpm-source-psy-i2c-fusb302" }; @@ -304,17 +299,135 @@ static struct bq24190_platform_data bq24190_pdata = { .regulator_init_data = &bq24190_vbus_init_data, }; +static struct i2c_board_info gpd_win_board_info = { + .type = "bq24190", + .addr = 0x6b, + .dev_name = "bq24190", + .swnode = &bq24190_node, + .platform_data = &bq24190_pdata, +}; + +/********** Xiaomi Mi Pad 2 charger IC settings **********/ +static struct regulator_consumer_supply bq2589x_vbus_consumer = { + .supply = "vbus", + .dev_name = "cht_wcove_pwrsrc", +}; + +static const struct regulator_init_data bq2589x_vbus_init_data = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .consumer_supplies = &bq2589x_vbus_consumer, + .num_consumer_supplies = 1, +}; + +static struct bq25890_platform_data bq2589x_pdata = { + .regulator_init_data = &bq2589x_vbus_init_data, +}; + +static const struct property_entry xiaomi_mipad2_props[] = { + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + PROPERTY_ENTRY_BOOL("linux,read-back-settings"), + { } +}; + +static const struct software_node xiaomi_mipad2_node = { + .properties = xiaomi_mipad2_props, +}; + +static struct i2c_board_info xiaomi_mipad2_board_info = { + .type = "bq25890", + .addr = 0x6a, + .dev_name = "bq25890", + .swnode = &xiaomi_mipad2_node, + .platform_data = &bq2589x_pdata, +}; + +/********** Lenovo Yogabook YB1-X90F/-X91F/-X91L charger settings **********/ +static const char * const lenovo_yb1_bq25892_suppliers[] = { "cht_wcove_pwrsrc" }; + +static const struct property_entry lenovo_yb1_bq25892_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", + lenovo_yb1_bq25892_suppliers), + PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000), + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + /* + * The firmware sets everything to the defaults, which leads to a + * somewhat low charge-current of 2048mA and worse to a battery-voltage + * of 4.2V instead of 4.35V (when booted without a charger connected). + * Use our own values instead of "linux,read-back-settings" to fix this. + */ + PROPERTY_ENTRY_U32("ti,charge-current", 4224000), + PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), + PROPERTY_ENTRY_U32("ti,termination-current", 256000), + PROPERTY_ENTRY_U32("ti,precharge-current", 128000), + PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3500000), + PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), + PROPERTY_ENTRY_U32("ti,boost-max-current", 1400000), + PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), + { } +}; + +static const struct software_node lenovo_yb1_bq25892_node = { + .properties = lenovo_yb1_bq25892_props, +}; + +static struct i2c_board_info lenovo_yogabook1_board_info = { + .type = "bq25892", + .addr = 0x6b, + .dev_name = "bq25892", + .swnode = &lenovo_yb1_bq25892_node, + .platform_data = &bq2589x_pdata, +}; + +/********** Lenovo Yogabook YT3-X90F charger settings **********/ +static const char * const lenovo_yt3_bq25892_1_suppliers[] = { "cht_wcove_pwrsrc" }; + +/* + * bq25892 charger settings for the round li-ion cells in the hinge, + * this is the main / biggest battery. + */ +static const struct property_entry lenovo_yt3_bq25892_1_props[] = { + PROPERTY_ENTRY_STRING_ARRAY("supplied-from", lenovo_yt3_bq25892_1_suppliers), + PROPERTY_ENTRY_STRING("linux,secondary-charger-name", "bq25890-charger-0"), + PROPERTY_ENTRY_U32("linux,iinlim-percentage", 60), + PROPERTY_ENTRY_U32("linux,pump-express-vbus-max", 12000000), + PROPERTY_ENTRY_BOOL("linux,skip-reset"), + /* + * The firmware sets everything to the defaults, leading to a low(ish) + * charge-current and battery-voltage of 2048mA resp 4.2V. Use the + * Android values instead of "linux,read-back-settings" to fix this. + */ + PROPERTY_ENTRY_U32("ti,charge-current", 3072000), + PROPERTY_ENTRY_U32("ti,battery-regulation-voltage", 4352000), + PROPERTY_ENTRY_U32("ti,termination-current", 128000), + PROPERTY_ENTRY_U32("ti,precharge-current", 128000), + PROPERTY_ENTRY_U32("ti,minimum-sys-voltage", 3700000), + PROPERTY_ENTRY_BOOL("ti,use-ilim-pin"), + /* Set 5V boost current-limit to 1.2A (MAX/POR values are 2.45A/1.4A) */ + PROPERTY_ENTRY_U32("ti,boost-voltage", 4998000), + PROPERTY_ENTRY_U32("ti,boost-max-current", 1200000), + { } +}; + +static const struct software_node lenovo_yt3_bq25892_1_node = { + .properties = lenovo_yt3_bq25892_1_props, +}; + +/* bq25892 charger for the round li-ion cells in the hinge */ +static struct i2c_board_info lenovo_yoga_tab3_board_info = { + .type = "bq25892", + .addr = 0x6b, + .dev_name = "bq25892_1", + .swnode = &lenovo_yt3_bq25892_1_node, + .platform_data = &bq2589x_pdata, +}; + static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) { struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + struct i2c_board_info *board_info = NULL; struct cht_wc_i2c_adap *adap; - struct i2c_board_info board_info = { - .type = "bq24190", - .addr = 0x6b, - .dev_name = "bq24190", - .swnode = &bq24190_node, - .platform_data = &bq24190_pdata, - }; int ret, reg, irq; irq = platform_get_irq(pdev, 0); @@ -334,7 +447,7 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) adap->adapter.class = I2C_CLASS_HWMON; adap->adapter.algo = &cht_wc_i2c_adap_algo; adap->adapter.lock_ops = &cht_wc_i2c_adap_lock_ops; - strlcpy(adap->adapter.name, "PMIC I2C Adapter", + strscpy(adap->adapter.name, "PMIC I2C Adapter", sizeof(adap->adapter.name)); adap->adapter.dev.parent = &pdev->dev; @@ -354,7 +467,7 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) return ret; /* Alloc and register client IRQ */ - adap->irq_domain = irq_domain_add_linear(NULL, 1, &irq_domain_simple_ops, NULL); + adap->irq_domain = irq_domain_create_linear(NULL, 1, &irq_domain_simple_ops, NULL); if (!adap->irq_domain) return -ENOMEM; @@ -379,17 +492,27 @@ static int cht_wc_i2c_adap_i2c_probe(struct platform_device *pdev) if (ret) goto remove_irq_domain; - /* - * Normally the Whiskey Cove PMIC is paired with a TI bq24292i charger, - * connected to this i2c bus, and a max17047 fuel-gauge and a fusb302 - * USB Type-C controller connected to another i2c bus. In this setup - * the max17047 and fusb302 devices are enumerated through an INT33FE - * ACPI device. If this device is present register an i2c-client for - * the TI bq24292i charger. - */ - if (acpi_dev_present("INT33FE", NULL, -1)) { - board_info.irq = adap->client_irq; - adap->client = i2c_new_client_device(&adap->adapter, &board_info); + switch (pmic->cht_wc_model) { + case INTEL_CHT_WC_GPD_WIN_POCKET: + board_info = &gpd_win_board_info; + break; + case INTEL_CHT_WC_XIAOMI_MIPAD2: + board_info = &xiaomi_mipad2_board_info; + break; + case INTEL_CHT_WC_LENOVO_YOGABOOK1: + board_info = &lenovo_yogabook1_board_info; + break; + case INTEL_CHT_WC_LENOVO_YT3_X90: + board_info = &lenovo_yoga_tab3_board_info; + break; + default: + dev_warn(&pdev->dev, "Unknown model, not instantiating charger device\n"); + break; + } + + if (board_info) { + board_info->irq = adap->client_irq; + adap->client = i2c_new_client_device(&adap->adapter, board_info); if (IS_ERR(adap->client)) { ret = PTR_ERR(adap->client); goto del_adapter; @@ -406,15 +529,13 @@ remove_irq_domain: return ret; } -static int cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev) +static void cht_wc_i2c_adap_i2c_remove(struct platform_device *pdev) { struct cht_wc_i2c_adap *adap = platform_get_drvdata(pdev); i2c_unregister_device(adap->client); i2c_del_adapter(&adap->adapter); irq_domain_remove(adap->irq_domain); - - return 0; } static const struct platform_device_id cht_wc_i2c_adap_id_table[] = { @@ -433,6 +554,6 @@ static struct platform_driver cht_wc_i2c_adap_driver = { }; module_platform_driver(cht_wc_i2c_adap_driver); -MODULE_DESCRIPTION("Intel CHT Whiskey Cove PMIC I2C Master driver"); +MODULE_DESCRIPTION("Intel CHT Whiskey Cove PMIC I2C controller driver"); MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); MODULE_LICENSE("GPL"); |