diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-designware-core.h')
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-core.h | 357 |
1 files changed, 196 insertions, 161 deletions
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index 6a53f75abf7c..bb5ce0a382f9 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -10,20 +10,19 @@ */ #include <linux/bits.h> -#include <linux/compiler_types.h> #include <linux/completion.h> -#include <linux/dev_printk.h> #include <linux/errno.h> #include <linux/i2c.h> +#include <linux/pm.h> #include <linux/regmap.h> #include <linux/types.h> -#define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \ - I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | \ - I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_BLOCK_DATA | \ - I2C_FUNC_SMBUS_I2C_BLOCK) +#define DW_IC_DEFAULT_FUNCTIONALITY (I2C_FUNC_I2C | \ + I2C_FUNC_SMBUS_BYTE | \ + I2C_FUNC_SMBUS_BYTE_DATA | \ + I2C_FUNC_SMBUS_WORD_DATA | \ + I2C_FUNC_SMBUS_BLOCK_DATA | \ + I2C_FUNC_SMBUS_I2C_BLOCK) #define DW_IC_CON_MASTER BIT(0) #define DW_IC_CON_SPEED_STD (1 << 1) @@ -37,124 +36,133 @@ #define DW_IC_CON_STOP_DET_IFADDRESSED BIT(7) #define DW_IC_CON_TX_EMPTY_CTRL BIT(8) #define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL BIT(9) +#define DW_IC_CON_BUS_CLEAR_CTRL BIT(11) #define DW_IC_DATA_CMD_DAT GENMASK(7, 0) +#define DW_IC_DATA_CMD_FIRST_DATA_BYTE BIT(11) /* * Registers offset */ -#define DW_IC_CON 0x00 -#define DW_IC_TAR 0x04 -#define DW_IC_SAR 0x08 -#define DW_IC_DATA_CMD 0x10 -#define DW_IC_SS_SCL_HCNT 0x14 -#define DW_IC_SS_SCL_LCNT 0x18 -#define DW_IC_FS_SCL_HCNT 0x1c -#define DW_IC_FS_SCL_LCNT 0x20 -#define DW_IC_HS_SCL_HCNT 0x24 -#define DW_IC_HS_SCL_LCNT 0x28 -#define DW_IC_INTR_STAT 0x2c -#define DW_IC_INTR_MASK 0x30 -#define DW_IC_RAW_INTR_STAT 0x34 -#define DW_IC_RX_TL 0x38 -#define DW_IC_TX_TL 0x3c -#define DW_IC_CLR_INTR 0x40 -#define DW_IC_CLR_RX_UNDER 0x44 -#define DW_IC_CLR_RX_OVER 0x48 -#define DW_IC_CLR_TX_OVER 0x4c -#define DW_IC_CLR_RD_REQ 0x50 -#define DW_IC_CLR_TX_ABRT 0x54 -#define DW_IC_CLR_RX_DONE 0x58 -#define DW_IC_CLR_ACTIVITY 0x5c -#define DW_IC_CLR_STOP_DET 0x60 -#define DW_IC_CLR_START_DET 0x64 -#define DW_IC_CLR_GEN_CALL 0x68 -#define DW_IC_ENABLE 0x6c -#define DW_IC_STATUS 0x70 -#define DW_IC_TXFLR 0x74 -#define DW_IC_RXFLR 0x78 -#define DW_IC_SDA_HOLD 0x7c -#define DW_IC_TX_ABRT_SOURCE 0x80 -#define DW_IC_ENABLE_STATUS 0x9c -#define DW_IC_CLR_RESTART_DET 0xa8 -#define DW_IC_COMP_PARAM_1 0xf4 -#define DW_IC_COMP_VERSION 0xf8 -#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A -#define DW_IC_COMP_TYPE 0xfc -#define DW_IC_COMP_TYPE_VALUE 0x44570140 - -#define DW_IC_INTR_RX_UNDER BIT(0) -#define DW_IC_INTR_RX_OVER BIT(1) -#define DW_IC_INTR_RX_FULL BIT(2) -#define DW_IC_INTR_TX_OVER BIT(3) -#define DW_IC_INTR_TX_EMPTY BIT(4) -#define DW_IC_INTR_RD_REQ BIT(5) -#define DW_IC_INTR_TX_ABRT BIT(6) -#define DW_IC_INTR_RX_DONE BIT(7) -#define DW_IC_INTR_ACTIVITY BIT(8) -#define DW_IC_INTR_STOP_DET BIT(9) -#define DW_IC_INTR_START_DET BIT(10) -#define DW_IC_INTR_GEN_CALL BIT(11) -#define DW_IC_INTR_RESTART_DET BIT(12) - -#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ - DW_IC_INTR_TX_ABRT | \ - DW_IC_INTR_STOP_DET) -#define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ - DW_IC_INTR_TX_EMPTY) -#define DW_IC_INTR_SLAVE_MASK (DW_IC_INTR_DEFAULT_MASK | \ - DW_IC_INTR_RX_DONE | \ - DW_IC_INTR_RX_UNDER | \ - DW_IC_INTR_RD_REQ) - -#define DW_IC_STATUS_ACTIVITY BIT(0) -#define DW_IC_STATUS_TFE BIT(2) -#define DW_IC_STATUS_MASTER_ACTIVITY BIT(5) -#define DW_IC_STATUS_SLAVE_ACTIVITY BIT(6) - -#define DW_IC_SDA_HOLD_RX_SHIFT 16 -#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, 16) - -#define DW_IC_ERR_TX_ABRT 0x1 - -#define DW_IC_TAR_10BITADDR_MASTER BIT(12) +#define DW_IC_CON 0x00 +#define DW_IC_TAR 0x04 +#define DW_IC_SAR 0x08 +#define DW_IC_DATA_CMD 0x10 +#define DW_IC_SS_SCL_HCNT 0x14 +#define DW_IC_SS_SCL_LCNT 0x18 +#define DW_IC_FS_SCL_HCNT 0x1c +#define DW_IC_FS_SCL_LCNT 0x20 +#define DW_IC_HS_SCL_HCNT 0x24 +#define DW_IC_HS_SCL_LCNT 0x28 +#define DW_IC_INTR_STAT 0x2c +#define DW_IC_INTR_MASK 0x30 +#define DW_IC_RAW_INTR_STAT 0x34 +#define DW_IC_RX_TL 0x38 +#define DW_IC_TX_TL 0x3c +#define DW_IC_CLR_INTR 0x40 +#define DW_IC_CLR_RX_UNDER 0x44 +#define DW_IC_CLR_RX_OVER 0x48 +#define DW_IC_CLR_TX_OVER 0x4c +#define DW_IC_CLR_RD_REQ 0x50 +#define DW_IC_CLR_TX_ABRT 0x54 +#define DW_IC_CLR_RX_DONE 0x58 +#define DW_IC_CLR_ACTIVITY 0x5c +#define DW_IC_CLR_STOP_DET 0x60 +#define DW_IC_CLR_START_DET 0x64 +#define DW_IC_CLR_GEN_CALL 0x68 +#define DW_IC_ENABLE 0x6c +#define DW_IC_STATUS 0x70 +#define DW_IC_TXFLR 0x74 +#define DW_IC_RXFLR 0x78 +#define DW_IC_SDA_HOLD 0x7c +#define DW_IC_TX_ABRT_SOURCE 0x80 +#define DW_IC_ENABLE_STATUS 0x9c +#define DW_IC_CLR_RESTART_DET 0xa8 +#define DW_IC_SMBUS_INTR_MASK 0xcc +#define DW_IC_COMP_PARAM_1 0xf4 +#define DW_IC_COMP_VERSION 0xf8 +#define DW_IC_SDA_HOLD_MIN_VERS 0x3131312A /* "111*" == v1.11* */ +#define DW_IC_COMP_TYPE 0xfc +#define DW_IC_COMP_TYPE_VALUE 0x44570140 /* "DW" + 0x0140 */ + +#define DW_IC_INTR_RX_UNDER BIT(0) +#define DW_IC_INTR_RX_OVER BIT(1) +#define DW_IC_INTR_RX_FULL BIT(2) +#define DW_IC_INTR_TX_OVER BIT(3) +#define DW_IC_INTR_TX_EMPTY BIT(4) +#define DW_IC_INTR_RD_REQ BIT(5) +#define DW_IC_INTR_TX_ABRT BIT(6) +#define DW_IC_INTR_RX_DONE BIT(7) +#define DW_IC_INTR_ACTIVITY BIT(8) +#define DW_IC_INTR_STOP_DET BIT(9) +#define DW_IC_INTR_START_DET BIT(10) +#define DW_IC_INTR_GEN_CALL BIT(11) +#define DW_IC_INTR_RESTART_DET BIT(12) +#define DW_IC_INTR_MST_ON_HOLD BIT(13) + +#define DW_IC_INTR_DEFAULT_MASK (DW_IC_INTR_RX_FULL | \ + DW_IC_INTR_TX_ABRT | \ + DW_IC_INTR_STOP_DET) +#define DW_IC_INTR_MASTER_MASK (DW_IC_INTR_DEFAULT_MASK | \ + DW_IC_INTR_TX_EMPTY) +#define DW_IC_INTR_SLAVE_MASK (DW_IC_INTR_DEFAULT_MASK | \ + DW_IC_INTR_RX_UNDER | \ + DW_IC_INTR_RD_REQ) + +#define DW_IC_ENABLE_ENABLE BIT(0) +#define DW_IC_ENABLE_ABORT BIT(1) + +#define DW_IC_STATUS_ACTIVITY BIT(0) +#define DW_IC_STATUS_TFE BIT(2) +#define DW_IC_STATUS_RFNE BIT(3) +#define DW_IC_STATUS_MASTER_ACTIVITY BIT(5) +#define DW_IC_STATUS_SLAVE_ACTIVITY BIT(6) +#define DW_IC_STATUS_MASTER_HOLD_TX_FIFO_EMPTY BIT(7) + +#define DW_IC_SDA_HOLD_RX_SHIFT 16 +#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, 16) + +#define DW_IC_ERR_TX_ABRT 0x1 + +#define DW_IC_TAR_10BITADDR_MASTER BIT(12) #define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH (BIT(2) | BIT(3)) #define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK GENMASK(3, 2) /* - * status codes + * Sofware status flags */ -#define STATUS_IDLE 0x0 -#define STATUS_WRITE_IN_PROGRESS 0x1 -#define STATUS_READ_IN_PROGRESS 0x2 +#define STATUS_ACTIVE BIT(0) +#define STATUS_WRITE_IN_PROGRESS BIT(1) +#define STATUS_READ_IN_PROGRESS BIT(2) +#define STATUS_MASK GENMASK(2, 0) /* * operation modes */ -#define DW_IC_MASTER 0 -#define DW_IC_SLAVE 1 +#define DW_IC_MASTER 0 +#define DW_IC_SLAVE 1 /* - * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register + * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register. * - * Only expected abort codes are listed here - * refer to the datasheet for the full list + * Only expected abort codes are listed here, + * refer to the datasheet for the full list. */ -#define ABRT_7B_ADDR_NOACK 0 -#define ABRT_10ADDR1_NOACK 1 -#define ABRT_10ADDR2_NOACK 2 -#define ABRT_TXDATA_NOACK 3 -#define ABRT_GCALL_NOACK 4 -#define ABRT_GCALL_READ 5 -#define ABRT_SBYTE_ACKDET 7 -#define ABRT_SBYTE_NORSTRT 9 -#define ABRT_10B_RD_NORSTRT 10 -#define ABRT_MASTER_DIS 11 -#define ARB_LOST 12 -#define ABRT_SLAVE_FLUSH_TXFIFO 13 -#define ABRT_SLAVE_ARBLOST 14 -#define ABRT_SLAVE_RD_INTX 15 +#define ABRT_7B_ADDR_NOACK 0 +#define ABRT_10ADDR1_NOACK 1 +#define ABRT_10ADDR2_NOACK 2 +#define ABRT_TXDATA_NOACK 3 +#define ABRT_GCALL_NOACK 4 +#define ABRT_GCALL_READ 5 +#define ABRT_SBYTE_ACKDET 7 +#define ABRT_SBYTE_NORSTRT 9 +#define ABRT_10B_RD_NORSTRT 10 +#define ABRT_MASTER_DIS 11 +#define ARB_LOST 12 +#define ABRT_SLAVE_FLUSH_TXFIFO 13 +#define ABRT_SLAVE_ARBLOST 14 +#define ABRT_SLAVE_RD_INTX 15 #define DW_IC_TX_ABRT_7B_ADDR_NOACK BIT(ABRT_7B_ADDR_NOACK) #define DW_IC_TX_ABRT_10ADDR1_NOACK BIT(ABRT_10ADDR1_NOACK) @@ -171,11 +179,11 @@ #define DW_IC_RX_ABRT_SLAVE_ARBLOST BIT(ABRT_SLAVE_ARBLOST) #define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO BIT(ABRT_SLAVE_FLUSH_TXFIFO) -#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ - DW_IC_TX_ABRT_10ADDR1_NOACK | \ - DW_IC_TX_ABRT_10ADDR2_NOACK | \ - DW_IC_TX_ABRT_TXDATA_NOACK | \ - DW_IC_TX_ABRT_GCALL_NOACK) +#define DW_IC_TX_ABRT_NOACK (DW_IC_TX_ABRT_7B_ADDR_NOACK | \ + DW_IC_TX_ABRT_10ADDR1_NOACK | \ + DW_IC_TX_ABRT_10ADDR2_NOACK | \ + DW_IC_TX_ABRT_TXDATA_NOACK | \ + DW_IC_TX_ABRT_GCALL_NOACK) struct clk; struct device; @@ -191,23 +199,27 @@ struct reset_control; * @cmd_complete: tx completion indicator * @clk: input reference clock * @pclk: clock required to access the registers + * @rst: optional reset for the controller * @slave: represent an I2C slave device - * @cmd_err: run time hadware error code + * @get_clk_rate_khz: callback to retrieve IP specific bus speed + * @cmd_err: run time hardware error code * @msgs: points to an array of messages currently being transferred * @msgs_num: the number of elements in msgs - * @msg_write_idx: the element index of the current tx message in the msgs - * array + * @msg_write_idx: the element index of the current tx message in the msgs array * @tx_buf_len: the length of the current tx buffer * @tx_buf: the current tx buffer - * @msg_read_idx: the element index of the current rx message in the msgs - * array + * @msg_read_idx: the element index of the current rx message in the msgs array * @rx_buf_len: the length of the current rx buffer * @rx_buf: the current rx buffer * @msg_err: error status of the current transfer * @status: i2c master status, one of STATUS_* * @abort_source: copy of the TX_ABRT_SOURCE register + * @sw_mask: SW mask of DW_IC_INTR_MASK used in polling mode * @irq: interrupt number for the i2c master + * @flags: platform specific flags like type of IO accessors or model * @adapter: i2c subsystem adapter node + * @functionality: I2C_FUNC_* ORed bits to reflect what controller does support + * @master_cfg: configuration for the master device * @slave_cfg: configuration for the slave device * @tx_fifo_depth: depth of the hardware tx fifo * @rx_fifo_depth: depth of the hardware rx fifo @@ -224,12 +236,17 @@ struct reset_control; * @hs_lcnt: high speed LCNT value * @acquire_lock: function to acquire a hardware lock on the bus * @release_lock: function to release a hardware lock on the bus - * @shared_with_punit: true if this bus is shared with the SoCs PUNIT - * @disable: function to disable the controller - * @disable_int: function to disable all interrupts + * @semaphore_idx: Index of table with semaphore type attached to the bus. It's + * -1 if there is no semaphore. + * @shared_with_punit: true if this bus is shared with the SoC's PUNIT * @init: function to initialize the I2C hardware + * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE - * @suspended: set to true if the controller is suspended + * @rinfo: I²C GPIO recovery information + * @bus_capacitance_pF: bus capacitance in picofarads + * @clk_freq_optimized: if this value is true, it means the hardware reduces + * its internal clock frequency by reducing the internal latency required + * to generate the high period and low period of SCL line. * * HCNT and LCNT parameters can be used if the platform knows more accurate * values than the one computed based only on the input clock frequency. @@ -245,7 +262,7 @@ struct dw_i2c_dev { struct clk *clk; struct clk *pclk; struct reset_control *rst; - struct i2c_client *slave; + struct i2c_client *slave; u32 (*get_clk_rate_khz) (struct dw_i2c_dev *dev); int cmd_err; struct i2c_msg *msgs; @@ -258,7 +275,8 @@ struct dw_i2c_dev { u8 *rx_buf; int msg_err; unsigned int status; - u32 abort_source; + unsigned int abort_source; + unsigned int sw_mask; int irq; u32 flags; struct i2c_adapter adapter; @@ -280,36 +298,48 @@ struct dw_i2c_dev { u16 hs_lcnt; int (*acquire_lock)(void); void (*release_lock)(void); + int semaphore_idx; bool shared_with_punit; - void (*disable)(struct dw_i2c_dev *dev); - void (*disable_int)(struct dw_i2c_dev *dev); int (*init)(struct dw_i2c_dev *dev); int (*set_sda_hold_time)(struct dw_i2c_dev *dev); int mode; struct i2c_bus_recovery_info rinfo; - bool suspended; + u32 bus_capacitance_pF; + bool clk_freq_optimized; }; -#define ACCESS_INTR_MASK BIT(0) -#define ACCESS_NO_IRQ_SUSPEND BIT(1) +#define ACCESS_INTR_MASK BIT(0) +#define ACCESS_NO_IRQ_SUSPEND BIT(1) +#define ARBITRATION_SEMAPHORE BIT(2) +#define ACCESS_POLLING BIT(3) -#define MODEL_MSCC_OCELOT BIT(8) -#define MODEL_BAIKAL_BT1 BIT(9) -#define MODEL_AMD_NAVI_GPU BIT(10) -#define MODEL_MASK GENMASK(11, 8) +#define MODEL_MSCC_OCELOT BIT(8) +#define MODEL_BAIKAL_BT1 BIT(9) +#define MODEL_AMD_NAVI_GPU BIT(10) +#define MODEL_WANGXUN_SP BIT(11) +#define MODEL_MASK GENMASK(11, 8) /* * Enable UCSI interrupt by writing 0xd at register * offset 0x474 specified in hardware specification. */ -#define AMD_UCSI_INTR_REG 0x474 -#define AMD_UCSI_INTR_EN 0xd +#define AMD_UCSI_INTR_REG 0x474 +#define AMD_UCSI_INTR_EN 0xd + +#define TXGBE_TX_FIFO_DEPTH 4 +#define TXGBE_RX_FIFO_DEPTH 1 + +struct i2c_dw_semaphore_callbacks { + int (*probe)(struct dw_i2c_dev *dev); +}; int i2c_dw_init_regmap(struct dw_i2c_dev *dev); -u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset); -u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset); +u32 i2c_dw_scl_hcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk, + u32 tSYMBOL, u32 tf, int offset); +u32 i2c_dw_scl_lcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk, + u32 tLOW, u32 tf, int offset); int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev); -unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev); +u32 i2c_dw_clk_rate(struct dw_i2c_dev *dev); int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare); int i2c_dw_acquire_lock(struct dw_i2c_dev *dev); void i2c_dw_release_lock(struct dw_i2c_dev *dev); @@ -317,20 +347,41 @@ int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev); int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev); int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev); u32 i2c_dw_func(struct i2c_adapter *adap); -void i2c_dw_disable(struct dw_i2c_dev *dev); -void i2c_dw_disable_int(struct dw_i2c_dev *dev); + +extern const struct dev_pm_ops i2c_dw_dev_pm_ops; static inline void __i2c_dw_enable(struct dw_i2c_dev *dev) { + dev->status |= STATUS_ACTIVE; regmap_write(dev->map, DW_IC_ENABLE, 1); } static inline void __i2c_dw_disable_nowait(struct dw_i2c_dev *dev) { regmap_write(dev->map, DW_IC_ENABLE, 0); + dev->status &= ~STATUS_ACTIVE; +} + +static inline void __i2c_dw_write_intr_mask(struct dw_i2c_dev *dev, + unsigned int intr_mask) +{ + unsigned int val = dev->flags & ACCESS_POLLING ? 0 : intr_mask; + + regmap_write(dev->map, DW_IC_INTR_MASK, val); + dev->sw_mask = intr_mask; +} + +static inline void __i2c_dw_read_intr_mask(struct dw_i2c_dev *dev, + unsigned int *intr_mask) +{ + if (!(dev->flags & ACCESS_POLLING)) + regmap_read(dev->map, DW_IC_INTR_MASK, intr_mask); + else + *intr_mask = dev->sw_mask; } void __i2c_dw_disable(struct dw_i2c_dev *dev); +void i2c_dw_disable(struct dw_i2c_dev *dev); extern void i2c_dw_configure_master(struct dw_i2c_dev *dev); extern int i2c_dw_probe_master(struct dw_i2c_dev *dev); @@ -343,19 +394,6 @@ static inline void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { } static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; } #endif -static inline int i2c_dw_probe(struct dw_i2c_dev *dev) -{ - switch (dev->mode) { - case DW_IC_SLAVE: - return i2c_dw_probe_slave(dev); - case DW_IC_MASTER: - return i2c_dw_probe_master(dev); - default: - dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode); - return -EINVAL; - } -} - static inline void i2c_dw_configure(struct dw_i2c_dev *dev) { if (i2c_detect_slave_mode(dev->dev)) @@ -364,17 +402,14 @@ static inline void i2c_dw_configure(struct dw_i2c_dev *dev) i2c_dw_configure_master(dev); } +int i2c_dw_probe(struct dw_i2c_dev *dev); + #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL) -extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev); -#else -static inline int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev) { return 0; } +int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev); #endif -int i2c_dw_validate_speed(struct dw_i2c_dev *dev); -void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev); - -#if IS_ENABLED(CONFIG_ACPI) -int i2c_dw_acpi_configure(struct device *device); -#else -static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; } +#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_AMDPSP) +int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev); #endif + +int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev); |