diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-designware-core.h')
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-core.h | 57 |
1 files changed, 24 insertions, 33 deletions
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index e9606c00b8d1..347843b4f5dd 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -10,11 +10,10 @@ */ #include <linux/bits.h> -#include <linux/compiler_types.h> #include <linux/completion.h> -#include <linux/dev_printk.h> #include <linux/errno.h> #include <linux/i2c.h> +#include <linux/pm.h> #include <linux/regmap.h> #include <linux/types.h> @@ -109,6 +108,7 @@ DW_IC_INTR_RX_UNDER | \ DW_IC_INTR_RD_REQ) +#define DW_IC_ENABLE_ENABLE BIT(0) #define DW_IC_ENABLE_ABORT BIT(1) #define DW_IC_STATUS_ACTIVITY BIT(0) @@ -116,6 +116,7 @@ #define DW_IC_STATUS_RFNE BIT(3) #define DW_IC_STATUS_MASTER_ACTIVITY BIT(5) #define DW_IC_STATUS_SLAVE_ACTIVITY BIT(6) +#define DW_IC_STATUS_MASTER_HOLD_TX_FIFO_EMPTY BIT(7) #define DW_IC_SDA_HOLD_RX_SHIFT 16 #define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, 16) @@ -142,10 +143,10 @@ #define DW_IC_SLAVE 1 /* - * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register + * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register. * - * Only expected abort codes are listed here - * refer to the datasheet for the full list + * Only expected abort codes are listed here, + * refer to the datasheet for the full list. */ #define ABRT_7B_ADDR_NOACK 0 #define ABRT_10ADDR1_NOACK 1 @@ -200,7 +201,7 @@ struct reset_control; * @rst: optional reset for the controller * @slave: represent an I2C slave device * @get_clk_rate_khz: callback to retrieve IP specific bus speed - * @cmd_err: run time hadware error code + * @cmd_err: run time hardware error code * @msgs: points to an array of messages currently being transferred * @msgs_num: the number of elements in msgs * @msg_write_idx: the element index of the current tx message in the msgs array @@ -236,12 +237,15 @@ struct reset_control; * @release_lock: function to release a hardware lock on the bus * @semaphore_idx: Index of table with semaphore type attached to the bus. It's * -1 if there is no semaphore. - * @shared_with_punit: true if this bus is shared with the SoCs PUNIT - * @disable: function to disable the controller + * @shared_with_punit: true if this bus is shared with the SoC's PUNIT * @init: function to initialize the I2C hardware * @set_sda_hold_time: callback to retrieve IP specific SDA hold timing * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE * @rinfo: I²C GPIO recovery information + * @bus_capacitance_pF: bus capacitance in picofarads + * @clk_freq_optimized: if this value is true, it means the hardware reduces + * its internal clock frequency by reducing the internal latency required + * to generate the high period and low period of SCL line. * * HCNT and LCNT parameters can be used if the platform knows more accurate * values than the one computed based only on the input clock frequency. @@ -295,11 +299,12 @@ struct dw_i2c_dev { void (*release_lock)(void); int semaphore_idx; bool shared_with_punit; - void (*disable)(struct dw_i2c_dev *dev); int (*init)(struct dw_i2c_dev *dev); int (*set_sda_hold_time)(struct dw_i2c_dev *dev); int mode; struct i2c_bus_recovery_info rinfo; + u32 bus_capacitance_pF; + bool clk_freq_optimized; }; #define ACCESS_INTR_MASK BIT(0) @@ -329,8 +334,10 @@ struct i2c_dw_semaphore_callbacks { }; int i2c_dw_init_regmap(struct dw_i2c_dev *dev); -u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset); -u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset); +u32 i2c_dw_scl_hcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk, + u32 tSYMBOL, u32 tf, int offset); +u32 i2c_dw_scl_lcnt(struct dw_i2c_dev *dev, unsigned int reg, u32 ic_clk, + u32 tLOW, u32 tf, int offset); int i2c_dw_set_sda_hold(struct dw_i2c_dev *dev); u32 i2c_dw_clk_rate(struct dw_i2c_dev *dev); int i2c_dw_prepare_clk(struct dw_i2c_dev *dev, bool prepare); @@ -340,7 +347,8 @@ int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev); int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev); int i2c_dw_set_fifo_size(struct dw_i2c_dev *dev); u32 i2c_dw_func(struct i2c_adapter *adap); -void i2c_dw_disable(struct dw_i2c_dev *dev); + +extern const struct dev_pm_ops i2c_dw_dev_pm_ops; static inline void __i2c_dw_enable(struct dw_i2c_dev *dev) { @@ -373,6 +381,7 @@ static inline void __i2c_dw_read_intr_mask(struct dw_i2c_dev *dev, } void __i2c_dw_disable(struct dw_i2c_dev *dev); +void i2c_dw_disable(struct dw_i2c_dev *dev); extern void i2c_dw_configure_master(struct dw_i2c_dev *dev); extern int i2c_dw_probe_master(struct dw_i2c_dev *dev); @@ -385,19 +394,6 @@ static inline void i2c_dw_configure_slave(struct dw_i2c_dev *dev) { } static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; } #endif -static inline int i2c_dw_probe(struct dw_i2c_dev *dev) -{ - switch (dev->mode) { - case DW_IC_SLAVE: - return i2c_dw_probe_slave(dev); - case DW_IC_MASTER: - return i2c_dw_probe_master(dev); - default: - dev_err(dev->dev, "Wrong operation mode: %d\n", dev->mode); - return -EINVAL; - } -} - static inline void i2c_dw_configure(struct dw_i2c_dev *dev) { if (i2c_detect_slave_mode(dev->dev)) @@ -406,6 +402,8 @@ static inline void i2c_dw_configure(struct dw_i2c_dev *dev) i2c_dw_configure_master(dev); } +int i2c_dw_probe(struct dw_i2c_dev *dev); + #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL) int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev); #endif @@ -414,11 +412,4 @@ int i2c_dw_baytrail_probe_lock_support(struct dw_i2c_dev *dev); int i2c_dw_amdpsp_probe_lock_support(struct dw_i2c_dev *dev); #endif -int i2c_dw_validate_speed(struct dw_i2c_dev *dev); -void i2c_dw_adjust_bus_speed(struct dw_i2c_dev *dev); - -#if IS_ENABLED(CONFIG_ACPI) -int i2c_dw_acpi_configure(struct device *device); -#else -static inline int i2c_dw_acpi_configure(struct device *device) { return -ENODEV; } -#endif +int i2c_dw_fw_parse_and_configure(struct dw_i2c_dev *dev); |