1 files changed, 99 insertions, 205 deletions

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 89ad88c54754..7be99656a67d 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -8,7 +8,6 @@
  * Copyright (C) 2007 MontaVista Software Inc.
  * Copyright (C) 2009 Provigent Ltd.
  */
-#include <linux/acpi.h>
 #include <linux/clk-provider.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
@@ -21,7 +20,6 @@
 #include <linux/kernel.h>
 #include <linux/mfd/syscon.h>
 #include <linux/module.h>
-#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
@@ -30,38 +28,15 @@
 #include <linux/reset.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/suspend.h>
 #include <linux/units.h>
 
 #include "i2c-designware-core.h"
 
 static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 {
-	return clk_get_rate(dev->clk) / KILO;
+	return clk_get_rate(dev->clk) / HZ_PER_KHZ;
 }
 
-#ifdef CONFIG_ACPI
-static const struct acpi_device_id dw_i2c_acpi_match[] = {
-	{ "INT33C2", 0 },
-	{ "INT33C3", 0 },
-	{ "INT3432", 0 },
-	{ "INT3433", 0 },
-	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
-	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
-	{ "AMD0010", ACCESS_INTR_MASK },
-	{ "AMDI0010", ACCESS_INTR_MASK },
-	{ "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE },
-	{ "AMDI0510", 0 },
-	{ "APMC0D0F", 0 },
-	{ "HISI02A1", 0 },
-	{ "HISI02A2", 0 },
-	{ "HISI02A3", 0 },
-	{ "HYGO0010", ACCESS_INTR_MASK },
-	{ }
-};
-MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
-#endif
-
 #ifdef CONFIG_OF
 #define BT1_I2C_CTL			0x100
 #define BT1_I2C_CTL_ADDR_MASK		GENMASK(7, 0)
@@ -97,10 +72,10 @@ static int bt1_i2c_write(void *context, unsigned int reg, unsigned int val)
 		return ret;
 
 	return regmap_write(dev->sysmap, BT1_I2C_CTL,
-		BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK));
+			    BT1_I2C_CTL_GO | BT1_I2C_CTL_WR | (reg & BT1_I2C_CTL_ADDR_MASK));
 }
 
-static struct regmap_config bt1_i2c_cfg = {
+static const struct regmap_config bt1_i2c_cfg = {
 	.reg_bits = 32,
 	.val_bits = 32,
 	.reg_stride = 4,
@@ -119,54 +94,21 @@ static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 	dev->map = devm_regmap_init(dev->dev, NULL, dev, &bt1_i2c_cfg);
 	return PTR_ERR_OR_ZERO(dev->map);
 }
-
-#define MSCC_ICPU_CFG_TWI_DELAY		0x0
-#define MSCC_ICPU_CFG_TWI_DELAY_ENABLE	BIT(0)
-#define MSCC_ICPU_CFG_TWI_SPIKE_FILTER	0x4
-
-static int mscc_twi_set_sda_hold_time(struct dw_i2c_dev *dev)
-{
-	writel((dev->sda_hold_time << 1) | MSCC_ICPU_CFG_TWI_DELAY_ENABLE,
-	       dev->ext + MSCC_ICPU_CFG_TWI_DELAY);
-
-	return 0;
-}
-
-static int dw_i2c_of_configure(struct platform_device *pdev)
-{
-	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
-
-	switch (dev->flags & MODEL_MASK) {
-	case MODEL_MSCC_OCELOT:
-		dev->ext = devm_platform_ioremap_resource(pdev, 1);
-		if (!IS_ERR(dev->ext))
-			dev->set_sda_hold_time = mscc_twi_set_sda_hold_time;
-		break;
-	default:
-		break;
-	}
-
-	return 0;
-}
-
-static const struct of_device_id dw_i2c_of_match[] = {
-	{ .compatible = "snps,designware-i2c", },
-	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
-	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
-	{},
-};
-MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #else
 static int bt1_i2c_request_regs(struct dw_i2c_dev *dev)
 {
 	return -ENODEV;
 }
+#endif
 
-static inline int dw_i2c_of_configure(struct platform_device *pdev)
+static int dw_i2c_get_parent_regmap(struct dw_i2c_dev *dev)
 {
-	return -ENODEV;
+	dev->map = dev_get_regmap(dev->dev->parent, NULL);
+	if (!dev->map)
+		return -ENODEV;
+
+	return 0;
 }
-#endif
 
 static void dw_i2c_plat_pm_cleanup(struct dw_i2c_dev *dev)
 {
@@ -181,10 +123,16 @@ static int dw_i2c_plat_request_regs(struct dw_i2c_dev *dev)
 	struct platform_device *pdev = to_platform_device(dev->dev);
 	int ret;
 
+	if (device_is_compatible(dev->dev, "intel,xe-i2c"))
+		return dw_i2c_get_parent_regmap(dev);
+
 	switch (dev->flags & MODEL_MASK) {
 	case MODEL_BAIKAL_BT1:
 		ret = bt1_i2c_request_regs(dev);
 		break;
+	case MODEL_WANGXUN_SP:
+		ret = dw_i2c_get_parent_regmap(dev);
+		break;
 	default:
 		dev->base = devm_platform_ioremap_resource(pdev, 0);
 		ret = PTR_ERR_OR_ZERO(dev->base);
@@ -225,11 +173,9 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 	int i = 0;
 	int ret;
 
-	ptr = i2c_dw_semaphore_cb_table;
-
 	dev->semaphore_idx = -1;
 
-	while (ptr->probe) {
+	for (ptr = i2c_dw_semaphore_cb_table; ptr->probe; ptr++) {
 		ret = ptr->probe(dev);
 		if (ret) {
 			/*
@@ -241,7 +187,6 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 				return ret;
 
 			i++;
-			ptr++;
 			continue;
 		}
 
@@ -252,76 +197,64 @@ static int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev)
 	return 0;
 }
 
-static void i2c_dw_remove_lock_support(struct dw_i2c_dev *dev)
-{
-	if (dev->semaphore_idx < 0)
-		return;
-
-	if (i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove)
-		i2c_dw_semaphore_cb_table[dev->semaphore_idx].remove(dev);
-}
-
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
+	u32 flags = (uintptr_t)device_get_match_data(&pdev->dev);
+	struct device *device = &pdev->dev;
 	struct i2c_adapter *adap;
 	struct dw_i2c_dev *dev;
-	struct i2c_timings *t;
 	int irq, ret;
 
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0)
+	irq = platform_get_irq_optional(pdev, 0);
+	if (irq == -ENXIO)
+		flags |= ACCESS_POLLING;
+	else if (irq < 0)
 		return irq;
 
-	dev = devm_kzalloc(&pdev->dev, sizeof(struct dw_i2c_dev), GFP_KERNEL);
+	dev = devm_kzalloc(device, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
 		return -ENOMEM;
 
-	dev->flags = (uintptr_t)device_get_match_data(&pdev->dev);
-	dev->dev = &pdev->dev;
+	if (device_property_present(device, "wx,i2c-snps-model"))
+		flags = MODEL_WANGXUN_SP | ACCESS_POLLING;
+
+	dev->dev = device;
 	dev->irq = irq;
+	dev->flags = flags;
 	platform_set_drvdata(pdev, dev);
 
 	ret = dw_i2c_plat_request_regs(dev);
 	if (ret)
 		return ret;
 
-	dev->rst = devm_reset_control_get_optional_exclusive(&pdev->dev, NULL);
+	dev->rst = devm_reset_control_get_optional_exclusive(device, NULL);
 	if (IS_ERR(dev->rst))
-		return PTR_ERR(dev->rst);
+		return dev_err_probe(device, PTR_ERR(dev->rst), "failed to acquire reset\n");
 
 	reset_control_deassert(dev->rst);
 
-	t = &dev->timings;
-	i2c_parse_fw_timings(&pdev->dev, t, false);
-
-	i2c_dw_adjust_bus_speed(dev);
-
-	if (pdev->dev.of_node)
-		dw_i2c_of_configure(pdev);
-
-	if (has_acpi_companion(&pdev->dev))
-		i2c_dw_acpi_configure(&pdev->dev);
-
-	ret = i2c_dw_validate_speed(dev);
+	ret = i2c_dw_fw_parse_and_configure(dev);
 	if (ret)
 		goto exit_reset;
 
 	ret = i2c_dw_probe_lock_support(dev);
-	if (ret)
+	if (ret) {
+		dev_err_probe(device, ret, "failed to probe lock support\n");
 		goto exit_reset;
+	}
 
 	i2c_dw_configure(dev);
 
 	/* Optional interface clock */
-	dev->pclk = devm_clk_get_optional(&pdev->dev, "pclk");
+	dev->pclk = devm_clk_get_optional(device, "pclk");
 	if (IS_ERR(dev->pclk)) {
-		ret = PTR_ERR(dev->pclk);
+		ret = dev_err_probe(device, PTR_ERR(dev->pclk), "failed to acquire pclk\n");
 		goto exit_reset;
 	}
 
-	dev->clk = devm_clk_get_optional(&pdev->dev, NULL);
+	dev->clk = devm_clk_get_optional(device, NULL);
 	if (IS_ERR(dev->clk)) {
-		ret = PTR_ERR(dev->clk);
+		ret = dev_err_probe(device, PTR_ERR(dev->clk), "failed to acquire clock\n");
 		goto exit_reset;
 	}
 
@@ -330,6 +263,7 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		goto exit_reset;
 
 	if (dev->clk) {
+		struct i2c_timings *t = &dev->timings;
 		u64 clk_khz;
 
 		dev->get_clk_rate_khz = i2c_dw_get_clk_rate_khz;
@@ -343,33 +277,27 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	adap = &dev->adapter;
 	adap->owner = THIS_MODULE;
 	adap->class = dmi_check_system(dw_i2c_hwmon_class_dmi) ?
-					I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
-	ACPI_COMPANION_SET(&adap->dev, ACPI_COMPANION(&pdev->dev));
-	adap->dev.of_node = pdev->dev.of_node;
+				       I2C_CLASS_HWMON : I2C_CLASS_DEPRECATED;
 	adap->nr = -1;
 
-	if (dev->flags & ACCESS_NO_IRQ_SUSPEND) {
-		dev_pm_set_driver_flags(&pdev->dev,
-					DPM_FLAG_SMART_PREPARE);
-	} else {
-		dev_pm_set_driver_flags(&pdev->dev,
-					DPM_FLAG_SMART_PREPARE |
-					DPM_FLAG_SMART_SUSPEND);
-	}
+	if (dev->flags & ACCESS_NO_IRQ_SUSPEND)
+		dev_pm_set_driver_flags(device, DPM_FLAG_SMART_PREPARE);
+	else
+		dev_pm_set_driver_flags(device, DPM_FLAG_SMART_PREPARE | DPM_FLAG_SMART_SUSPEND);
 
-	device_enable_async_suspend(&pdev->dev);
+	device_enable_async_suspend(device);
 
 	/* The code below assumes runtime PM to be disabled. */
-	WARN_ON(pm_runtime_enabled(&pdev->dev));
+	WARN_ON(pm_runtime_enabled(device));
 
-	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
-	pm_runtime_use_autosuspend(&pdev->dev);
-	pm_runtime_set_active(&pdev->dev);
+	pm_runtime_set_autosuspend_delay(device, 1000);
+	pm_runtime_use_autosuspend(device);
+	pm_runtime_set_active(device);
 
 	if (dev->shared_with_punit)
-		pm_runtime_get_noresume(&pdev->dev);
+		pm_runtime_get_noresume(device);
 
-	pm_runtime_enable(&pdev->dev);
+	pm_runtime_enable(device);
 
 	ret = i2c_dw_probe(dev);
 	if (ret)
@@ -379,115 +307,79 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 
 exit_probe:
 	dw_i2c_plat_pm_cleanup(dev);
+	i2c_dw_prepare_clk(dev, false);
 exit_reset:
 	reset_control_assert(dev->rst);
 	return ret;
 }
 
-static int dw_i2c_plat_remove(struct platform_device *pdev)
+static void dw_i2c_plat_remove(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	struct device *device = &pdev->dev;
 
-	pm_runtime_get_sync(&pdev->dev);
+	pm_runtime_get_sync(device);
 
 	i2c_del_adapter(&dev->adapter);
 
-	dev->disable(dev);
+	i2c_dw_disable(dev);
 
-	pm_runtime_dont_use_autosuspend(&pdev->dev);
-	pm_runtime_put_sync(&pdev->dev);
+	pm_runtime_dont_use_autosuspend(device);
+	pm_runtime_put_noidle(device);
 	dw_i2c_plat_pm_cleanup(dev);
 
-	i2c_dw_remove_lock_support(dev);
+	i2c_dw_prepare_clk(dev, false);
 
 	reset_control_assert(dev->rst);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int dw_i2c_plat_prepare(struct device *dev)
-{
-	/*
-	 * If the ACPI companion device object is present for this device, it
-	 * may be accessed during suspend and resume of other devices via I2C
-	 * operation regions, so tell the PM core and middle layers to avoid
-	 * skipping system suspend/resume callbacks for it in that case.
-	 */
-	return !has_acpi_companion(dev);
-}
-#else
-#define dw_i2c_plat_prepare	NULL
-#endif
-
-#ifdef CONFIG_PM
-static int dw_i2c_plat_runtime_suspend(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	if (i_dev->shared_with_punit)
-		return 0;
-
-	i_dev->disable(i_dev);
-	i2c_dw_prepare_clk(i_dev, false);
-
-	return 0;
-}
-
-static int __maybe_unused dw_i2c_plat_suspend(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	i2c_mark_adapter_suspended(&i_dev->adapter);
-
-	return dw_i2c_plat_runtime_suspend(dev);
-}
-
-static int dw_i2c_plat_runtime_resume(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	if (!i_dev->shared_with_punit)
-		i2c_dw_prepare_clk(i_dev, true);
-
-	i_dev->init(i_dev);
-
-	return 0;
-}
-
-static int __maybe_unused dw_i2c_plat_resume(struct device *dev)
-{
-	struct dw_i2c_dev *i_dev = dev_get_drvdata(dev);
-
-	dw_i2c_plat_runtime_resume(dev);
-	i2c_mark_adapter_resumed(&i_dev->adapter);
-
-	return 0;
 }
 
-static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
-	.prepare = dw_i2c_plat_prepare,
-	SET_LATE_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
-	SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend, dw_i2c_plat_runtime_resume, NULL)
+static const struct of_device_id dw_i2c_of_match[] = {
+	{ .compatible = "snps,designware-i2c", },
+	{ .compatible = "mscc,ocelot-i2c", .data = (void *)MODEL_MSCC_OCELOT },
+	{ .compatible = "baikal,bt1-sys-i2c", .data = (void *)MODEL_BAIKAL_BT1 },
+	{}
 };
+MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 
-#define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)
-#else
-#define DW_I2C_DEV_PMOPS NULL
-#endif
+static const struct acpi_device_id dw_i2c_acpi_match[] = {
+	{ "80860F41", ACCESS_NO_IRQ_SUSPEND },
+	{ "808622C1", ACCESS_NO_IRQ_SUSPEND },
+	{ "AMD0010", ACCESS_INTR_MASK },
+	{ "AMDI0010", ACCESS_INTR_MASK },
+	{ "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE },
+	{ "AMDI0510", 0 },
+	{ "APMC0D0F", 0 },
+	{ "FUJI200B", 0 },
+	{ "HISI02A1", 0 },
+	{ "HISI02A2", 0 },
+	{ "HISI02A3", 0 },
+	{ "HJMC3001", 0 },
+	{ "HYGO0010", ACCESS_INTR_MASK },
+	{ "INT33C2", 0 },
+	{ "INT33C3", 0 },
+	{ "INT3432", 0 },
+	{ "INT3433", 0 },
+	{ "INTC10EF", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, dw_i2c_acpi_match);
 
-/* Work with hotplug and coldplug */
-MODULE_ALIAS("platform:i2c_designware");
+static const struct platform_device_id dw_i2c_platform_ids[] = {
+	{ "i2c_designware" },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, dw_i2c_platform_ids);
 
 static struct platform_driver dw_i2c_driver = {
 	.probe = dw_i2c_plat_probe,
 	.remove = dw_i2c_plat_remove,
 	.driver		= {
 		.name	= "i2c_designware",
-		.of_match_table = of_match_ptr(dw_i2c_of_match),
-		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
-		.pm	= DW_I2C_DEV_PMOPS,
+		.of_match_table = dw_i2c_of_match,
+		.acpi_match_table = dw_i2c_acpi_match,
+		.pm	= pm_ptr(&i2c_dw_dev_pm_ops),
 	},
+	.id_table = dw_i2c_platform_ids,
 };
 
 static int __init dw_i2c_init_driver(void)
@@ -505,3 +397,5 @@ module_exit(dw_i2c_exit_driver);
 MODULE_AUTHOR("Baruch Siach <baruch@tkos.co.il>");
 MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter");
 MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS("I2C_DW");
+MODULE_IMPORT_NS("I2C_DW_COMMON");