diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-iop3xx.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-iop3xx.c | 104 |
1 files changed, 59 insertions, 45 deletions
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index 85cbe4b55578..ce5ca5b90b39 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -1,3 +1,4 @@ +// SPDX-License-Identifier: GPL-2.0-only /* ------------------------------------------------------------------------- */ /* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x */ /* ------------------------------------------------------------------------- */ @@ -21,12 +22,8 @@ * - Make it work with IXP46x chips * - Cleanup function names, coding style, etc * - * - writing to slave address causes latchup on iop331. + * - writing to local target address causes latchup on iop331. * fix: driver refuses to address self. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, version 2. */ #include <linux/interrupt.h> @@ -38,7 +35,7 @@ #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/io.h> -#include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include "i2c-iop3xx.h" @@ -71,17 +68,16 @@ iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap) /* * Every time unit enable is asserted, GPOD needs to be cleared - * on IOP3XX to avoid data corruption on the bus. + * on IOP3XX to avoid data corruption on the bus. We use the + * gpiod_set_raw_value() to make sure the 0 hits the hardware + * GPOD register. These descriptors are only passed along to + * the device if this is necessary. */ -#if defined(CONFIG_ARCH_IOP32X) || defined(CONFIG_ARCH_IOP33X) - if (iop3xx_adap->id == 0) { - gpio_set_value(7, 0); - gpio_set_value(6, 0); - } else { - gpio_set_value(5, 0); - gpio_set_value(4, 0); - } -#endif + if (iop3xx_adap->gpio_scl) + gpiod_set_raw_value(iop3xx_adap->gpio_scl, 0); + if (iop3xx_adap->gpio_sda) + gpiod_set_raw_value(iop3xx_adap->gpio_sda, 0); + /* NB SR bits not same position as CR IE bits :-( */ iop3xx_adap->SR_enabled = IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD | @@ -129,10 +125,12 @@ iop3xx_i2c_error(u32 sr) int rc = 0; if ((sr & IOP3XX_ISR_BERRD)) { - if ( !rc ) rc = -I2C_ERR_BERR; + if (!rc) + rc = -I2C_ERR_BERR; } if ((sr & IOP3XX_ISR_ALD)) { - if ( !rc ) rc = -I2C_ERR_ALD; + if (!rc) + rc = -I2C_ERR_ALD; } return rc; } @@ -155,12 +153,12 @@ iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap) * sleep until interrupted, then recover and analyse the SR * saved by handler */ -typedef int (* compare_func)(unsigned test, unsigned mask); +typedef int (*compare_func)(unsigned test, unsigned mask); /* returns 1 on correct comparison */ static int iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, - unsigned flags, unsigned* status, + unsigned flags, unsigned *status, compare_func compare) { unsigned sr = 0; @@ -171,7 +169,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, do { interrupted = wait_event_interruptible_timeout ( iop3xx_adap->waitq, - (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )), + (done = compare(sr = iop3xx_i2c_get_srstat(iop3xx_adap), flags)), 1 * HZ ); if ((rc = iop3xx_i2c_error(sr)) < 0) { @@ -181,7 +179,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, *status = sr; return -ETIMEDOUT; } - } while(!done); + } while (!done); *status = sr; @@ -208,7 +206,7 @@ iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) { return iop3xx_i2c_wait_event( iop3xx_adap, - IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD, + IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD, status, any_bits_set); } @@ -230,13 +228,13 @@ iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) static int iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, - struct i2c_msg* msg) + struct i2c_msg *msg) { unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); int status; int rc; - /* avoid writing to my slave address (hangs on 80331), + /* avoid writing to local target address (hangs on 80331), * forbidden in Intel developer manual */ if (msg->addr == MYSAR) { @@ -277,7 +275,7 @@ iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, } static int -iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte, +iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char *byte, int stop) { unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); @@ -309,7 +307,7 @@ iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count) int rc = 0; for (ii = 0; rc == 0 && ii != count; ++ii) - rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1); + rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii == count-1); return rc; } @@ -321,7 +319,7 @@ iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count) int rc = 0; for (ii = 0; rc == 0 && ii != count; ++ii) - rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1); + rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii == count-1); return rc; } @@ -334,7 +332,7 @@ iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count) * condition. */ static int -iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) +iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg *pmsg) { struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; int rc; @@ -351,12 +349,9 @@ iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) } } -/* - * master_xfer() - main read/write entry - */ static int -iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, - int num) +iop3xx_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, + int num) { struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; int im = 0; @@ -373,7 +368,7 @@ iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, iop3xx_i2c_transaction_cleanup(iop3xx_adap); - if(ret) + if (ret) return ret; return im; @@ -386,11 +381,11 @@ iop3xx_i2c_func(struct i2c_adapter *adap) } static const struct i2c_algorithm iop3xx_i2c_algo = { - .master_xfer = iop3xx_i2c_master_xfer, - .functionality = iop3xx_i2c_func, + .xfer = iop3xx_i2c_xfer, + .functionality = iop3xx_i2c_func, }; -static int +static void iop3xx_i2c_remove(struct platform_device *pdev) { struct i2c_adapter *padapter = platform_get_drvdata(pdev); @@ -410,8 +405,6 @@ iop3xx_i2c_remove(struct platform_device *pdev) release_mem_region(res->start, IOP3XX_I2C_IO_SIZE); kfree(adapter_data); kfree(padapter); - - return 0; } static int @@ -434,6 +427,21 @@ iop3xx_i2c_probe(struct platform_device *pdev) goto free_adapter; } + adapter_data->gpio_scl = devm_gpiod_get_optional(&pdev->dev, + "scl", + GPIOD_ASIS); + if (IS_ERR(adapter_data->gpio_scl)) { + ret = PTR_ERR(adapter_data->gpio_scl); + goto free_both; + } + adapter_data->gpio_sda = devm_gpiod_get_optional(&pdev->dev, + "sda", + GPIOD_ASIS); + if (IS_ERR(adapter_data->gpio_sda)) { + ret = PTR_ERR(adapter_data->gpio_sda); + goto free_both; + } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { ret = -ENODEV; @@ -456,21 +464,20 @@ iop3xx_i2c_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) { - ret = -ENXIO; + ret = irq; goto unmap; } ret = request_irq(irq, iop3xx_i2c_irq_handler, 0, pdev->name, adapter_data); - if (ret) { - ret = -EIO; + if (ret) goto unmap; - } memcpy(new_adapter->name, pdev->name, strlen(pdev->name)); new_adapter->owner = THIS_MODULE; - new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + new_adapter->class = I2C_CLASS_HWMON; new_adapter->dev.parent = &pdev->dev; + new_adapter->dev.of_node = pdev->dev.of_node; new_adapter->nr = pdev->id; /* @@ -508,12 +515,19 @@ out: return ret; } +static const struct of_device_id i2c_iop3xx_match[] = { + { .compatible = "intel,iop3xx-i2c", }, + { .compatible = "intel,ixp4xx-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, i2c_iop3xx_match); static struct platform_driver iop3xx_i2c_driver = { .probe = iop3xx_i2c_probe, .remove = iop3xx_i2c_remove, .driver = { .name = "IOP3xx-I2C", + .of_match_table = i2c_iop3xx_match, }, }; |
