diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-qup.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-qup.c | 49 |
1 files changed, 42 insertions, 7 deletions
diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c index 598102d16677..3a36d682ed57 100644 --- a/drivers/i2c/busses/i2c-qup.c +++ b/drivers/i2c/busses/i2c-qup.c @@ -14,12 +14,13 @@ #include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/i2c.h> +#include <linux/interconnect.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/module.h> -#include <linux/of.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/scatterlist.h> /* QUP Registers */ @@ -150,6 +151,8 @@ /* TAG length for DATA READ in RX FIFO */ #define READ_RX_TAGS_LEN 2 +#define QUP_BUS_WIDTH 8 + static unsigned int scl_freq; module_param_named(scl_freq, scl_freq, uint, 0444); MODULE_PARM_DESC(scl_freq, "SCL frequency override"); @@ -227,6 +230,7 @@ struct qup_i2c_dev { int irq; struct clk *clk; struct clk *pclk; + struct icc_path *icc_path; struct i2c_adapter adap; int clk_ctl; @@ -255,6 +259,10 @@ struct qup_i2c_dev { /* To configure when bus is in run state */ u32 config_run; + /* bandwidth votes */ + u32 src_clk_freq; + u32 cur_bw_clk_freq; + /* dma parameters */ bool is_dma; /* To check if the current transfer is using DMA */ @@ -453,6 +461,23 @@ static int qup_i2c_bus_active(struct qup_i2c_dev *qup, int len) return ret; } +static int qup_i2c_vote_bw(struct qup_i2c_dev *qup, u32 clk_freq) +{ + u32 needed_peak_bw; + int ret; + + if (qup->cur_bw_clk_freq == clk_freq) + return 0; + + needed_peak_bw = Bps_to_icc(clk_freq * QUP_BUS_WIDTH); + ret = icc_set_bw(qup->icc_path, 0, needed_peak_bw); + if (ret) + return ret; + + qup->cur_bw_clk_freq = clk_freq; + return 0; +} + static void qup_i2c_write_tx_fifo_v1(struct qup_i2c_dev *qup) { struct qup_i2c_block *blk = &qup->blk; @@ -793,10 +818,8 @@ static int qup_i2c_bam_schedule_desc(struct qup_i2c_dev *qup) dma_async_issue_pending(qup->brx.dma); } - if (!wait_for_completion_timeout(&qup->xfer, qup->xfer_timeout)) { - dev_err(qup->dev, "normal trans timed out\n"); + if (!wait_for_completion_timeout(&qup->xfer, qup->xfer_timeout)) ret = -ETIMEDOUT; - } if (ret || qup->bus_err || qup->qup_err) { reinit_completion(&qup->xfer); @@ -840,6 +863,10 @@ static int qup_i2c_bam_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int ret = 0; int idx = 0; + ret = qup_i2c_vote_bw(qup, qup->src_clk_freq); + if (ret) + return ret; + enable_irq(qup->irq); ret = qup_i2c_req_dma(qup); @@ -1645,12 +1672,13 @@ static void qup_i2c_disable_clocks(struct qup_i2c_dev *qup) config = readl(qup->base + QUP_CONFIG); config |= QUP_CLOCK_AUTO_GATE; writel(config, qup->base + QUP_CONFIG); + qup_i2c_vote_bw(qup, 0); clk_disable_unprepare(qup->pclk); } static const struct acpi_device_id qup_i2c_acpi_match[] = { { "QCOM8010"}, - { }, + { } }; MODULE_DEVICE_TABLE(acpi, qup_i2c_acpi_match); @@ -1685,7 +1713,7 @@ static int qup_i2c_probe(struct platform_device *pdev) } } - if (of_device_is_compatible(pdev->dev.of_node, "qcom,i2c-qup-v1.1.1")) { + if (device_is_compatible(&pdev->dev, "qcom,i2c-qup-v1.1.1")) { qup->adap.algo = &qup_i2c_algo; qup->adap.quirks = &qup_i2c_quirks; is_qup_v1 = true; @@ -1745,6 +1773,11 @@ static int qup_i2c_probe(struct platform_device *pdev) goto fail_dma; } qup->is_dma = true; + + qup->icc_path = devm_of_icc_get(&pdev->dev, NULL); + if (IS_ERR(qup->icc_path)) + return dev_err_probe(&pdev->dev, PTR_ERR(qup->icc_path), + "failed to get interconnect path\n"); } nodma: @@ -1793,6 +1826,7 @@ nodma: qup_i2c_enable_clocks(qup); src_clk_freq = clk_get_rate(qup->clk); } + qup->src_clk_freq = src_clk_freq; /* * Bootloaders might leave a pending interrupt on certain QUP's, @@ -1976,7 +2010,7 @@ MODULE_DEVICE_TABLE(of, qup_i2c_dt_match); static struct platform_driver qup_i2c_driver = { .probe = qup_i2c_probe, - .remove_new = qup_i2c_remove, + .remove = qup_i2c_remove, .driver = { .name = "i2c_qup", .pm = pm_ptr(&qup_i2c_qup_pm_ops), @@ -1987,5 +2021,6 @@ static struct platform_driver qup_i2c_driver = { module_platform_driver(qup_i2c_driver); +MODULE_DESCRIPTION("Qualcomm QUP based I2C controller"); MODULE_LICENSE("GPL v2"); MODULE_ALIAS("platform:i2c_qup"); |