diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-rk3x.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-rk3x.c | 36 |
1 files changed, 17 insertions, 19 deletions
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 086fdf262e7b..d4e9196445c0 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -28,8 +28,8 @@ /* Register Map */ #define REG_CON 0x00 /* control register */ #define REG_CLKDIV 0x04 /* clock divisor register */ -#define REG_MRXADDR 0x08 /* slave address for REGISTER_TX */ -#define REG_MRXRADDR 0x0c /* slave register address for REGISTER_TX */ +#define REG_MRXADDR 0x08 /* target address for REGISTER_TX */ +#define REG_MRXRADDR 0x0c /* target register address for REGISTER_TX */ #define REG_MTXCNT 0x10 /* number of bytes to be transmitted */ #define REG_MRXCNT 0x14 /* number of bytes to be received */ #define REG_IEN 0x18 /* interrupt enable */ @@ -68,8 +68,8 @@ enum { /* REG_IEN/REG_IPD bits */ #define REG_INT_BTF BIT(0) /* a byte was transmitted */ #define REG_INT_BRF BIT(1) /* a byte was received */ -#define REG_INT_MBTF BIT(2) /* master data transmit finished */ -#define REG_INT_MBRF BIT(3) /* master data receive finished */ +#define REG_INT_MBTF BIT(2) /* controller data transmit finished */ +#define REG_INT_MBRF BIT(3) /* controller data receive finished */ #define REG_INT_START BIT(4) /* START condition generated */ #define REG_INT_STOP BIT(5) /* STOP condition generated */ #define REG_INT_NAKRCV BIT(6) /* NACK received */ @@ -184,7 +184,7 @@ struct rk3x_i2c_soc_data { * @wait: the waitqueue to wait for i2c transfer * @busy: the condition for the event to wait for * @msg: current i2c message - * @addr: addr of i2c slave device + * @addr: addr of i2c target device * @mode: mode of i2c transfer * @is_last_msg: flag determines whether it is the last msg in this transfer * @state: state of i2c transfer @@ -979,7 +979,7 @@ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) /* * The I2C adapter can issue a small (len < 4) write packet before * reading. This speeds up SMBus-style register reads. - * The MRXADDR/MRXRADDR hold the slave address and the slave register + * The MRXADDR/MRXRADDR hold the target address and the target register * address in this case. */ @@ -1016,7 +1016,7 @@ static int rk3x_i2c_setup(struct rk3x_i2c *i2c, struct i2c_msg *msgs, int num) addr |= 1; /* set read bit */ /* - * We have to transmit the slave addr first. Use + * We have to transmit the target addr first. Use * MOD_REGISTER_TX for that purpose. */ i2c->mode = REG_CON_MOD_REGISTER_TX; @@ -1060,7 +1060,8 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap, struct i2c_msg *msgs, int num, bool polling) { struct rk3x_i2c *i2c = (struct rk3x_i2c *)adap->algo_data; - unsigned long timeout, flags; + unsigned long flags; + long time_left; u32 val; int ret = 0; int i; @@ -1092,23 +1093,20 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap, if (!polling) { rk3x_i2c_start(i2c); - timeout = wait_event_timeout(i2c->wait, !i2c->busy, - msecs_to_jiffies(WAIT_TIMEOUT)); + time_left = wait_event_timeout(i2c->wait, !i2c->busy, + msecs_to_jiffies(WAIT_TIMEOUT)); } else { disable_irq(i2c->irq); rk3x_i2c_start(i2c); - timeout = rk3x_i2c_wait_xfer_poll(i2c); + time_left = rk3x_i2c_wait_xfer_poll(i2c); enable_irq(i2c->irq); } spin_lock_irqsave(&i2c->lock, flags); - if (timeout == 0) { - dev_err(i2c->dev, "timeout, ipd: 0x%02x, state: %d\n", - i2c_readl(i2c, REG_IPD), i2c->state); - + if (time_left == 0) { /* Force a STOP condition without interrupt */ i2c_writel(i2c, 0, REG_IEN); val = i2c_readl(i2c, REG_CON) & REG_CON_TUNING_MASK; @@ -1162,9 +1160,9 @@ static u32 rk3x_i2c_func(struct i2c_adapter *adap) } static const struct i2c_algorithm rk3x_i2c_algorithm = { - .master_xfer = rk3x_i2c_xfer, - .master_xfer_atomic = rk3x_i2c_xfer_polling, - .functionality = rk3x_i2c_func, + .xfer = rk3x_i2c_xfer, + .xfer_atomic = rk3x_i2c_xfer_polling, + .functionality = rk3x_i2c_func, }; static const struct rk3x_i2c_soc_data rv1108_soc_data = { @@ -1400,7 +1398,7 @@ static SIMPLE_DEV_PM_OPS(rk3x_i2c_pm_ops, NULL, rk3x_i2c_resume); static struct platform_driver rk3x_i2c_driver = { .probe = rk3x_i2c_probe, - .remove_new = rk3x_i2c_remove, + .remove = rk3x_i2c_remove, .driver = { .name = "rk3x-i2c", .of_match_table = rk3x_i2c_match, |