diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-sis5595.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-sis5595.c | 42 |
1 files changed, 15 insertions, 27 deletions
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 79fd96a04386..ca06fffb8f61 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -1,20 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later /* Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and Philip Edelbrock <phil@netroedge.com> - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Note: we assume there can only be one SIS5595 with one SMBus interface */ @@ -123,7 +111,7 @@ static int blacklist[] = { /* If force_addr is set to anything different from 0, we forcibly enable the device at the given address. */ static u16 force_addr; -module_param(force_addr, ushort, 0); +module_param_hw(force_addr, ushort, ioport, 0); MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); static struct pci_driver sis5595_driver; @@ -187,11 +175,11 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev) if (force_addr) { dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base); - if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base) - != PCIBIOS_SUCCESSFUL) + retval = pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base); + if (retval != PCIBIOS_SUCCESSFUL) goto error; - if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a) - != PCIBIOS_SUCCESSFUL) + retval = pci_read_config_word(SIS5595_dev, ACPI_BASE, &a); + if (retval != PCIBIOS_SUCCESSFUL) goto error; if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) { /* doesn't work for some chips! */ @@ -200,16 +188,16 @@ static int sis5595_setup(struct pci_dev *SIS5595_dev) } } - if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val) - != PCIBIOS_SUCCESSFUL) + retval = pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val); + if (retval != PCIBIOS_SUCCESSFUL) goto error; if ((val & 0x80) == 0) { dev_info(&SIS5595_dev->dev, "enabling ACPI\n"); - if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80) - != PCIBIOS_SUCCESSFUL) + retval = pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80); + if (retval != PCIBIOS_SUCCESSFUL) goto error; - if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val) - != PCIBIOS_SUCCESSFUL) + retval = pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val); + if (retval != PCIBIOS_SUCCESSFUL) goto error; if ((val & 0x80) == 0) { /* doesn't work for some chips? */ @@ -269,7 +257,7 @@ static int sis5595_transaction(struct i2c_adapter *adap) if (temp & 0x20) { dev_err(&adap->dev, "Bus collision! SMBus may be locked until " "next hard reset (or not...)\n"); - /* Clock stops and slave is stuck in mid-transmission */ + /* Clock stops and target is stuck in mid-transmission */ result = -EIO; } @@ -365,11 +353,11 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, + .class = I2C_CLASS_HWMON, .algo = &smbus_algorithm, }; -static DEFINE_PCI_DEVICE_TABLE(sis5595_ids) = { +static const struct pci_device_id sis5595_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, { 0, } }; |