1 files changed, 0 insertions, 547 deletions

diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c
deleted file mode 100644
index 627b1f62a749..000000000000
--- a/drivers/ide/ide-floppy.c
+++ /dev/null
@@ -1,547 +0,0 @@
-/*
- * IDE ATAPI floppy driver.
- *
- * Copyright (C) 1996-1999  Gadi Oxman <gadio@netvision.net.il>
- * Copyright (C) 2000-2002  Paul Bristow <paul@paulbristow.net>
- * Copyright (C) 2005       Bartlomiej Zolnierkiewicz
- *
- * This driver supports the following IDE floppy drives:
- *
- * LS-120/240 SuperDisk
- * Iomega Zip 100/250
- * Iomega PC Card Clik!/PocketZip
- *
- * For a historical changelog see
- * Documentation/ide/ChangeLog.ide-floppy.1996-2002
- */
-
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/interrupt.h>
-#include <linux/major.h>
-#include <linux/errno.h>
-#include <linux/genhd.h>
-#include <linux/cdrom.h>
-#include <linux/ide.h>
-#include <linux/hdreg.h>
-#include <linux/bitops.h>
-#include <linux/mutex.h>
-#include <linux/scatterlist.h>
-
-#include <scsi/scsi_ioctl.h>
-
-#include <asm/byteorder.h>
-#include <linux/uaccess.h>
-#include <linux/io.h>
-#include <asm/unaligned.h>
-
-#include "ide-floppy.h"
-
-/*
- * After each failed packet command we issue a request sense command and retry
- * the packet command IDEFLOPPY_MAX_PC_RETRIES times.
- */
-#define IDEFLOPPY_MAX_PC_RETRIES	3
-
-/* format capacities descriptor codes */
-#define CAPACITY_INVALID	0x00
-#define CAPACITY_UNFORMATTED	0x01
-#define CAPACITY_CURRENT	0x02
-#define CAPACITY_NO_CARTRIDGE	0x03
-
-/*
- * The following delay solves a problem with ATAPI Zip 100 drive where BSY bit
- * was apparently being deasserted before the unit was ready to receive data.
- */
-#define IDEFLOPPY_PC_DELAY	(HZ/20)	/* default delay for ZIP 100 (50ms) */
-
-static int ide_floppy_callback(ide_drive_t *drive, int dsc)
-{
-	struct ide_disk_obj *floppy = drive->driver_data;
-	struct ide_atapi_pc *pc = drive->pc;
-	struct request *rq = pc->rq;
-	int uptodate = pc->error ? 0 : 1;
-
-	ide_debug_log(IDE_DBG_FUNC, "enter");
-
-	if (drive->failed_pc == pc)
-		drive->failed_pc = NULL;
-
-	if (pc->c[0] == GPCMD_READ_10 || pc->c[0] == GPCMD_WRITE_10 ||
-	    (req_op(rq) == REQ_OP_SCSI_IN || req_op(rq) == REQ_OP_SCSI_OUT))
-		uptodate = 1; /* FIXME */
-	else if (pc->c[0] == GPCMD_REQUEST_SENSE) {
-
-		u8 *buf = bio_data(rq->bio);
-
-		if (!pc->error) {
-			floppy->sense_key = buf[2] & 0x0F;
-			floppy->asc = buf[12];
-			floppy->ascq = buf[13];
-			floppy->progress_indication = buf[15] & 0x80 ?
-				(u16)get_unaligned((u16 *)&buf[16]) : 0x10000;
-
-			if (drive->failed_pc)
-				ide_debug_log(IDE_DBG_PC, "pc = %x",
-					      drive->failed_pc->c[0]);
-
-			ide_debug_log(IDE_DBG_SENSE, "sense key = %x, asc = %x,"
-				      "ascq = %x", floppy->sense_key,
-				      floppy->asc, floppy->ascq);
-		} else
-			printk(KERN_ERR PFX "Error in REQUEST SENSE itself - "
-			       "Aborting request!\n");
-	}
-
-	if (ata_misc_request(rq))
-		scsi_req(rq)->result = uptodate ? 0 : IDE_DRV_ERROR_GENERAL;
-
-	return uptodate;
-}
-
-static void ide_floppy_report_error(struct ide_disk_obj *floppy,
-				    struct ide_atapi_pc *pc)
-{
-	/* suppress error messages resulting from Medium not present */
-	if (floppy->sense_key == 0x02 &&
-	    floppy->asc       == 0x3a &&
-	    floppy->ascq      == 0x00)
-		return;
-
-	printk(KERN_ERR PFX "%s: I/O error, pc = %2x, key = %2x, "
-			"asc = %2x, ascq = %2x\n",
-			floppy->drive->name, pc->c[0], floppy->sense_key,
-			floppy->asc, floppy->ascq);
-
-}
-
-static ide_startstop_t ide_floppy_issue_pc(ide_drive_t *drive,
-					   struct ide_cmd *cmd,
-					   struct ide_atapi_pc *pc)
-{
-	struct ide_disk_obj *floppy = drive->driver_data;
-
-	if (drive->failed_pc == NULL &&
-	    pc->c[0] != GPCMD_REQUEST_SENSE)
-		drive->failed_pc = pc;
-
-	/* Set the current packet command */
-	drive->pc = pc;
-
-	if (pc->retries > IDEFLOPPY_MAX_PC_RETRIES) {
-		unsigned int done = blk_rq_bytes(drive->hwif->rq);
-
-		if (!(pc->flags & PC_FLAG_SUPPRESS_ERROR))
-			ide_floppy_report_error(floppy, pc);
-
-		/* Giving up */
-		pc->error = IDE_DRV_ERROR_GENERAL;
-
-		drive->failed_pc = NULL;
-		drive->pc_callback(drive, 0);
-		ide_complete_rq(drive, BLK_STS_IOERR, done);
-		return ide_stopped;
-	}
-
-	ide_debug_log(IDE_DBG_FUNC, "retry #%d", pc->retries);
-
-	pc->retries++;
-
-	return ide_issue_pc(drive, cmd);
-}
-
-void ide_floppy_create_read_capacity_cmd(struct ide_atapi_pc *pc)
-{
-	ide_init_pc(pc);
-	pc->c[0] = GPCMD_READ_FORMAT_CAPACITIES;
-	pc->c[7] = 255;
-	pc->c[8] = 255;
-	pc->req_xfer = 255;
-}
-
-/* A mode sense command is used to "sense" floppy parameters. */
-void ide_floppy_create_mode_sense_cmd(struct ide_atapi_pc *pc, u8 page_code)
-{
-	u16 length = 8; /* sizeof(Mode Parameter Header) = 8 Bytes */
-
-	ide_init_pc(pc);
-	pc->c[0] = GPCMD_MODE_SENSE_10;
-	pc->c[1] = 0;
-	pc->c[2] = page_code;
-
-	switch (page_code) {
-	case IDEFLOPPY_CAPABILITIES_PAGE:
-		length += 12;
-		break;
-	case IDEFLOPPY_FLEXIBLE_DISK_PAGE:
-		length += 32;
-		break;
-	default:
-		printk(KERN_ERR PFX "unsupported page code in %s\n", __func__);
-	}
-	put_unaligned(cpu_to_be16(length), (u16 *) &pc->c[7]);
-	pc->req_xfer = length;
-}
-
-static void idefloppy_create_rw_cmd(ide_drive_t *drive,
-				    struct ide_atapi_pc *pc, struct request *rq,
-				    unsigned long sector)
-{
-	struct ide_disk_obj *floppy = drive->driver_data;
-	int block = sector / floppy->bs_factor;
-	int blocks = blk_rq_sectors(rq) / floppy->bs_factor;
-	int cmd = rq_data_dir(rq);
-
-	ide_debug_log(IDE_DBG_FUNC, "block: %d, blocks: %d", block, blocks);
-
-	ide_init_pc(pc);
-	pc->c[0] = cmd == READ ? GPCMD_READ_10 : GPCMD_WRITE_10;
-	put_unaligned(cpu_to_be16(blocks), (unsigned short *)&pc->c[7]);
-	put_unaligned(cpu_to_be32(block), (unsigned int *) &pc->c[2]);
-
-	memcpy(scsi_req(rq)->cmd, pc->c, 12);
-
-	pc->rq = rq;
-	if (cmd == WRITE)
-		pc->flags |= PC_FLAG_WRITING;
-
-	pc->flags |= PC_FLAG_DMA_OK;
-}
-
-static void idefloppy_blockpc_cmd(struct ide_disk_obj *floppy,
-		struct ide_atapi_pc *pc, struct request *rq)
-{
-	ide_init_pc(pc);
-	memcpy(pc->c, scsi_req(rq)->cmd, sizeof(pc->c));
-	pc->rq = rq;
-	if (blk_rq_bytes(rq)) {
-		pc->flags |= PC_FLAG_DMA_OK;
-		if (rq_data_dir(rq) == WRITE)
-			pc->flags |= PC_FLAG_WRITING;
-	}
-}
-
-static ide_startstop_t ide_floppy_do_request(ide_drive_t *drive,
-					     struct request *rq, sector_t block)
-{
-	struct ide_disk_obj *floppy = drive->driver_data;
-	struct ide_cmd cmd;
-	struct ide_atapi_pc *pc;
-
-	ide_debug_log(IDE_DBG_FUNC, "enter, cmd: 0x%x\n", rq->cmd[0]);
-
-	if (drive->debug_mask & IDE_DBG_RQ)
-		blk_dump_rq_flags(rq, (rq->rq_disk
-					? rq->rq_disk->disk_name
-					: "dev?"));
-
-	if (scsi_req(rq)->result >= ERROR_MAX) {
-		if (drive->failed_pc) {
-			ide_floppy_report_error(floppy, drive->failed_pc);
-			drive->failed_pc = NULL;
-		} else
-			printk(KERN_ERR PFX "%s: I/O error\n", drive->name);
-
-		if (ata_misc_request(rq)) {
-			scsi_req(rq)->result = 0;
-			ide_complete_rq(drive, BLK_STS_OK, blk_rq_bytes(rq));
-			return ide_stopped;
-		} else
-			goto out_end;
-	}
-
-	switch (req_op(rq)) {
-	default:
-		if (((long)blk_rq_pos(rq) % floppy->bs_factor) ||
-		    (blk_rq_sectors(rq) % floppy->bs_factor)) {
-			printk(KERN_ERR PFX "%s: unsupported r/w rq size\n",
-				drive->name);
-			goto out_end;
-		}
-		pc = &floppy->queued_pc;
-		idefloppy_create_rw_cmd(drive, pc, rq, (unsigned long)block);
-		break;
-	case REQ_OP_SCSI_IN:
-	case REQ_OP_SCSI_OUT:
-		pc = &floppy->queued_pc;
-		idefloppy_blockpc_cmd(floppy, pc, rq);
-		break;
-	case REQ_OP_DRV_IN:
-	case REQ_OP_DRV_OUT:
-		switch (ide_req(rq)->type) {
-		case ATA_PRIV_MISC:
-		case ATA_PRIV_SENSE:
-			pc = (struct ide_atapi_pc *)rq->special;
-			break;
-		default:
-			BUG();
-		}
-	}
-
-	ide_prep_sense(drive, rq);
-
-	memset(&cmd, 0, sizeof(cmd));
-
-	if (rq_data_dir(rq))
-		cmd.tf_flags |= IDE_TFLAG_WRITE;
-
-	cmd.rq = rq;
-
-	if (!blk_rq_is_passthrough(rq) || blk_rq_bytes(rq)) {
-		ide_init_sg_cmd(&cmd, blk_rq_bytes(rq));
-		ide_map_sg(drive, &cmd);
-	}
-
-	pc->rq = rq;
-
-	return ide_floppy_issue_pc(drive, &cmd, pc);
-out_end:
-	drive->failed_pc = NULL;
-	if (blk_rq_is_passthrough(rq) && scsi_req(rq)->result == 0)
-		scsi_req(rq)->result = -EIO;
-	ide_complete_rq(drive, BLK_STS_IOERR, blk_rq_bytes(rq));
-	return ide_stopped;
-}
-
-/*
- * Look at the flexible disk page parameters. We ignore the CHS capacity
- * parameters and use the LBA parameters instead.
- */
-static int ide_floppy_get_flexible_disk_page(ide_drive_t *drive,
-					     struct ide_atapi_pc *pc)
-{
-	struct ide_disk_obj *floppy = drive->driver_data;
-	struct gendisk *disk = floppy->disk;
-	u8 *page, buf[40];
-	int capacity, lba_capacity;
-	u16 transfer_rate, sector_size, cyls, rpm;
-	u8 heads, sectors;
-
-	ide_floppy_create_mode_sense_cmd(pc, IDEFLOPPY_FLEXIBLE_DISK_PAGE);
-
-	if (ide_queue_pc_tail(drive, disk, pc, buf, pc->req_xfer)) {
-		printk(KERN_ERR PFX "Can't get flexible disk page params\n");
-		return 1;
-	}
-
-	if (buf[3] & 0x80)
-		drive->dev_flags |= IDE_DFLAG_WP;
-	else
-		drive->dev_flags &= ~IDE_DFLAG_WP;
-
-	set_disk_ro(disk, !!(drive->dev_flags & IDE_DFLAG_WP));
-
-	page = &buf[8];
-
-	transfer_rate = be16_to_cpup((__be16 *)&buf[8 + 2]);
-	sector_size   = be16_to_cpup((__be16 *)&buf[8 + 6]);
-	cyls          = be16_to_cpup((__be16 *)&buf[8 + 8]);
-	rpm           = be16_to_cpup((__be16 *)&buf[8 + 28]);
-	heads         = buf[8 + 4];
-	sectors       = buf[8 + 5];
-
-	capacity = cyls * heads * sectors * sector_size;
-
-	if (memcmp(page, &floppy->flexible_disk_page, 32))
-		printk(KERN_INFO PFX "%s: %dkB, %d/%d/%d CHS, %d kBps, "
-				"%d sector size, %d rpm\n",
-				drive->name, capacity / 1024, cyls, heads,
-				sectors, transfer_rate / 8, sector_size, rpm);
-
-	memcpy(&floppy->flexible_disk_page, page, 32);
-	drive->bios_cyl = cyls;
-	drive->bios_head = heads;
-	drive->bios_sect = sectors;
-	lba_capacity = floppy->blocks * floppy->block_size;
-
-	if (capacity < lba_capacity) {
-		printk(KERN_NOTICE PFX "%s: The disk reports a capacity of %d "
-			"bytes, but the drive only handles %d\n",
-			drive->name, lba_capacity, capacity);
-		floppy->blocks = floppy->block_size ?
-			capacity / floppy->block_size : 0;
-		drive->capacity64 = floppy->blocks * floppy->bs_factor;
-	}
-
-	return 0;
-}
-
-/*
- * Determine if a media is present in the floppy drive, and if so, its LBA
- * capacity.
- */
-static int ide_floppy_get_capacity(ide_drive_t *drive)
-{
-	struct ide_disk_obj *floppy = drive->driver_data;
-	struct gendisk *disk = floppy->disk;
-	struct ide_atapi_pc pc;
-	u8 *cap_desc;
-	u8 pc_buf[256], header_len, desc_cnt;
-	int i, rc = 1, blocks, length;
-
-	ide_debug_log(IDE_DBG_FUNC, "enter");
-
-	drive->bios_cyl = 0;
-	drive->bios_head = drive->bios_sect = 0;
-	floppy->blocks = 0;
-	floppy->bs_factor = 1;
-	drive->capacity64 = 0;
-
-	ide_floppy_create_read_capacity_cmd(&pc);
-	if (ide_queue_pc_tail(drive, disk, &pc, pc_buf, pc.req_xfer)) {
-		printk(KERN_ERR PFX "Can't get floppy parameters\n");
-		return 1;
-	}
-	header_len = pc_buf[3];
-	cap_desc = &pc_buf[4];
-	desc_cnt = header_len / 8; /* capacity descriptor of 8 bytes */
-
-	for (i = 0; i < desc_cnt; i++) {
-		unsigned int desc_start = 4 + i*8;
-
-		blocks = be32_to_cpup((__be32 *)&pc_buf[desc_start]);
-		length = be16_to_cpup((__be16 *)&pc_buf[desc_start + 6]);
-
-		ide_debug_log(IDE_DBG_PROBE, "Descriptor %d: %dkB, %d blocks, "
-					     "%d sector size",
-					     i, blocks * length / 1024,
-					     blocks, length);
-
-		if (i)
-			continue;
-		/*
-		 * the code below is valid only for the 1st descriptor, ie i=0
-		 */
-
-		switch (pc_buf[desc_start + 4] & 0x03) {
-		/* Clik! drive returns this instead of CAPACITY_CURRENT */
-		case CAPACITY_UNFORMATTED:
-			if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
-				/*
-				 * If it is not a clik drive, break out
-				 * (maintains previous driver behaviour)
-				 */
-				break;
-		case CAPACITY_CURRENT:
-			/* Normal Zip/LS-120 disks */
-			if (memcmp(cap_desc, &floppy->cap_desc, 8))
-				printk(KERN_INFO PFX "%s: %dkB, %d blocks, %d "
-				       "sector size\n",
-				       drive->name, blocks * length / 1024,
-				       blocks, length);
-			memcpy(&floppy->cap_desc, cap_desc, 8);
-
-			if (!length || length % 512) {
-				printk(KERN_NOTICE PFX "%s: %d bytes block size"
-				       " not supported\n", drive->name, length);
-			} else {
-				floppy->blocks = blocks;
-				floppy->block_size = length;
-				floppy->bs_factor = length / 512;
-				if (floppy->bs_factor != 1)
-					printk(KERN_NOTICE PFX "%s: Warning: "
-					       "non 512 bytes block size not "
-					       "fully supported\n",
-					       drive->name);
-				drive->capacity64 =
-					floppy->blocks * floppy->bs_factor;
-				rc = 0;
-			}
-			break;
-		case CAPACITY_NO_CARTRIDGE:
-			/*
-			 * This is a KERN_ERR so it appears on screen
-			 * for the user to see
-			 */
-			printk(KERN_ERR PFX "%s: No disk in drive\n",
-			       drive->name);
-			break;
-		case CAPACITY_INVALID:
-			printk(KERN_ERR PFX "%s: Invalid capacity for disk "
-				"in drive\n", drive->name);
-			break;
-		}
-		ide_debug_log(IDE_DBG_PROBE, "Descriptor 0 Code: %d",
-					     pc_buf[desc_start + 4] & 0x03);
-	}
-
-	/* Clik! disk does not support get_flexible_disk_page */
-	if (!(drive->atapi_flags & IDE_AFLAG_CLIK_DRIVE))
-		(void) ide_floppy_get_flexible_disk_page(drive, &pc);
-
-	return rc;
-}
-
-static void ide_floppy_setup(ide_drive_t *drive)
-{
-	struct ide_disk_obj *floppy = drive->driver_data;
-	u16 *id = drive->id;
-
-	drive->pc_callback	 = ide_floppy_callback;
-
-	/*
-	 * We used to check revisions here. At this point however I'm giving up.
-	 * Just assume they are all broken, its easier.
-	 *
-	 * The actual reason for the workarounds was likely a driver bug after
-	 * all rather than a firmware bug, and the workaround below used to hide
-	 * it. It should be fixed as of version 1.9, but to be on the safe side
-	 * we'll leave the limitation below for the 2.2.x tree.
-	 */
-	if (strstarts((char *)&id[ATA_ID_PROD], "IOMEGA ZIP 100 ATAPI")) {
-		drive->atapi_flags |= IDE_AFLAG_ZIP_DRIVE;
-		/* This value will be visible in the /proc/ide/hdx/settings */
-		drive->pc_delay = IDEFLOPPY_PC_DELAY;
-		blk_queue_max_hw_sectors(drive->queue, 64);
-	}
-
-	/*
-	 * Guess what? The IOMEGA Clik! drive also needs the above fix. It makes
-	 * nasty clicking noises without it, so please don't remove this.
-	 */
-	if (strstarts((char *)&id[ATA_ID_PROD], "IOMEGA Clik!")) {
-		blk_queue_max_hw_sectors(drive->queue, 64);
-		drive->atapi_flags |= IDE_AFLAG_CLIK_DRIVE;
-		/* IOMEGA Clik! drives do not support lock/unlock commands */
-		drive->dev_flags &= ~IDE_DFLAG_DOORLOCKING;
-	}
-
-	(void) ide_floppy_get_capacity(drive);
-
-	ide_proc_register_driver(drive, floppy->driver);
-
-	drive->dev_flags |= IDE_DFLAG_ATTACH;
-}
-
-static void ide_floppy_flush(ide_drive_t *drive)
-{
-}
-
-static int ide_floppy_init_media(ide_drive_t *drive, struct gendisk *disk)
-{
-	int ret = 0;
-
-	if (ide_do_test_unit_ready(drive, disk))
-		ide_do_start_stop(drive, disk, 1);
-
-	ret = ide_floppy_get_capacity(drive);
-
-	set_capacity(disk, ide_gd_capacity(drive));
-
-	return ret;
-}
-
-const struct ide_disk_ops ide_atapi_disk_ops = {
-	.check		= ide_check_atapi_device,
-	.get_capacity	= ide_floppy_get_capacity,
-	.setup		= ide_floppy_setup,
-	.flush		= ide_floppy_flush,
-	.init_media	= ide_floppy_init_media,
-	.set_doorlock	= ide_set_media_lock,
-	.do_request	= ide_floppy_do_request,
-	.ioctl		= ide_floppy_ioctl,
-};