diff options
Diffstat (limited to 'drivers/iio/accel/bma400.h')
| -rw-r--r-- | drivers/iio/accel/bma400.h | 165 |
1 files changed, 129 insertions, 36 deletions
diff --git a/drivers/iio/accel/bma400.h b/drivers/iio/accel/bma400.h index c4c8d74155c2..b5f3cac51610 100644 --- a/drivers/iio/accel/bma400.h +++ b/drivers/iio/accel/bma400.h @@ -16,30 +16,45 @@ * Read-Only Registers */ +/* Chip ID of BMA 400 devices found in the chip ID register. */ +#define BMA400_ID_REG_VAL 0x90 + /* Status and ID registers */ #define BMA400_CHIP_ID_REG 0x00 #define BMA400_ERR_REG 0x02 #define BMA400_STATUS_REG 0x03 /* Acceleration registers */ -#define BMA400_X_AXIS_LSB_REG 0x04 -#define BMA400_X_AXIS_MSB_REG 0x05 -#define BMA400_Y_AXIS_LSB_REG 0x06 -#define BMA400_Y_AXIS_MSB_REG 0x07 -#define BMA400_Z_AXIS_LSB_REG 0x08 -#define BMA400_Z_AXIS_MSB_REG 0x09 +#define BMA400_ACC_X_LSB_REG 0x04 +#define BMA400_ACC_X_MSB_REG 0x05 +#define BMA400_ACC_Y_LSB_REG 0x06 +#define BMA400_ACC_Y_MSB_REG 0x07 +#define BMA400_ACC_Z_LSB_REG 0x08 +#define BMA400_ACC_Z_MSB_REG 0x09 /* Sensor time registers */ -#define BMA400_SENSOR_TIME0 0x0a -#define BMA400_SENSOR_TIME1 0x0b -#define BMA400_SENSOR_TIME2 0x0c +#define BMA400_SENSOR_TIME0_REG 0x0a +#define BMA400_SENSOR_TIME1_REG 0x0b +#define BMA400_SENSOR_TIME2_REG 0x0c /* Event and interrupt registers */ #define BMA400_EVENT_REG 0x0d + #define BMA400_INT_STAT0_REG 0x0e +#define BMA400_INT_STAT0_GEN1_MASK BIT(2) +#define BMA400_INT_STAT0_GEN2_MASK BIT(3) +#define BMA400_INT_STAT0_DRDY_MASK BIT(7) + #define BMA400_INT_STAT1_REG 0x0f +#define BMA400_INT_STAT1_STEP_INT_MASK GENMASK(9, 8) +#define BMA400_INT_STAT1_S_TAP_MASK BIT(10) +#define BMA400_INT_STAT1_D_TAP_MASK BIT(11) + #define BMA400_INT_STAT2_REG 0x10 +/* Bit present in all INT_STAT registers */ +#define BMA400_INT_STAT_ENG_OVRRUN_MASK BIT(4) + /* Temperature register */ #define BMA400_TEMP_DATA_REG 0x11 @@ -53,47 +68,125 @@ #define BMA400_STEP_CNT1_REG 0x16 #define BMA400_STEP_CNT3_REG 0x17 #define BMA400_STEP_STAT_REG 0x18 +#define BMA400_STEP_RAW_LEN 0x03 /* * Read-write configuration registers */ -#define BMA400_ACC_CONFIG0_REG 0x19 -#define BMA400_ACC_CONFIG1_REG 0x1a +#define BMA400_ACC_CONFIG0_REG 0x19 +#define BMA400_ACC_CONFIG0_LP_OSR_MASK GENMASK(6, 5) + +#define BMA400_ACC_CONFIG1_REG 0x1a +#define BMA400_ACC_CONFIG1_ODR_MASK GENMASK(3, 0) +#define BMA400_ACC_CONFIG1_ODR_MIN_RAW 0x05 +#define BMA400_ACC_CONFIG1_ODR_LP_RAW 0x06 +#define BMA400_ACC_CONFIG1_ODR_MAX_RAW 0x0b +#define BMA400_ACC_CONFIG1_ODR_MAX_HZ 800 +#define BMA400_ACC_CONFIG1_ODR_MIN_WHOLE_HZ 25 +#define BMA400_ACC_CONFIG1_ODR_MIN_HZ 12 +#define BMA400_ACC_CONFIG1_NP_OSR_MASK GENMASK(5, 4) +#define BMA400_ACC_CONFIG1_ACC_RANGE_MASK GENMASK(7, 6) + #define BMA400_ACC_CONFIG2_REG 0x1b -#define BMA400_CMD_REG 0x7e -/* Chip ID of BMA 400 devices found in the chip ID register. */ -#define BMA400_ID_REG_VAL 0x90 +/* Interrupt registers */ +#define BMA400_INT_CONFIG0_REG 0x1f +#define BMA400_INT_CONFIG0_GEN1_MASK BIT(2) +#define BMA400_INT_CONFIG0_GEN2_MASK BIT(3) +#define BMA400_INT_CONFIG0_DRDY_MASK BIT(7) -#define BMA400_LP_OSR_SHIFT 5 -#define BMA400_NP_OSR_SHIFT 4 -#define BMA400_SCALE_SHIFT 6 +enum bma400_generic_intr { + BMA400_GEN1_INTR = 0x1, + BMA400_GEN2_INTR = 0x2, +}; -#define BMA400_TWO_BITS_MASK GENMASK(1, 0) -#define BMA400_LP_OSR_MASK GENMASK(6, 5) -#define BMA400_NP_OSR_MASK GENMASK(5, 4) -#define BMA400_ACC_ODR_MASK GENMASK(3, 0) -#define BMA400_ACC_SCALE_MASK GENMASK(7, 6) +#define BMA400_INT_CONFIG1_REG 0x20 +#define BMA400_INT_CONFIG1_STEP_INT_MASK BIT(0) +#define BMA400_INT_CONFIG1_S_TAP_MASK BIT(2) +#define BMA400_INT_CONFIG1_D_TAP_MASK BIT(3) -#define BMA400_ACC_ODR_MIN_RAW 0x05 -#define BMA400_ACC_ODR_LP_RAW 0x06 -#define BMA400_ACC_ODR_MAX_RAW 0x0b +#define BMA400_INT1_MAP_REG 0x21 +#define BMA400_INT12_MAP_REG 0x23 +#define BMA400_INT_IO_CTRL_REG 0x24 -#define BMA400_ACC_ODR_MAX_HZ 800 -#define BMA400_ACC_ODR_MIN_WHOLE_HZ 25 -#define BMA400_ACC_ODR_MIN_HZ 12 +#define BMA400_TWO_BITS_MASK GENMASK(1, 0) -#define BMA400_SCALE_MIN 38357 -#define BMA400_SCALE_MAX 306864 +/* Generic interrupts register */ +#define BMA400_GENINT_CONFIG_REG_BASE 0x3f +#define BMA400_NUM_GENINT_CONFIG_REGS 11 +#define BMA400_GENINT_CONFIG_REG(gen_intr, config_idx) \ + (BMA400_GENINT_CONFIG_REG_BASE + \ + (gen_intr - 1) * BMA400_NUM_GENINT_CONFIG_REGS + \ + (config_idx)) +#define BMA400_GENINT_CONFIG0_HYST_MASK GENMASK(1, 0) +#define BMA400_GENINT_CONFIG0_REF_UPD_MODE_MASK GENMASK(3, 2) +#define BMA400_GENINT_CONFIG0_DATA_SRC_MASK BIT(4) +#define BMA400_GENINT_CONFIG0_X_EN_MASK BIT(5) +#define BMA400_GENINT_CONFIG0_Y_EN_MASK BIT(6) +#define BMA400_GENINT_CONFIG0_Z_EN_MASK BIT(7) + +enum bma400_accel_data_src { + ACCEL_FILT1 = 0x0, + ACCEL_FILT2 = 0x1, +}; + +enum bma400_ref_updt_mode { + BMA400_REF_MANUAL_UPDT_MODE = 0x0, + BMA400_REF_ONETIME_UPDT_MODE = 0x1, + BMA400_REF_EVERYTIME_UPDT_MODE = 0x2, + BMA400_REF_EVERYTIME_LP_UPDT_MODE = 0x3, +}; + +#define BMA400_GEN_CONFIG1_OFF 0x01 +#define BMA400_GENINT_CONFIG1_AXES_COMB_MASK BIT(0) +#define BMA400_GENINT_CONFIG1_DETCT_CRIT_MASK BIT(1) + +enum bma400_genintr_acceleval_axescomb { + BMA400_EVAL_X_OR_Y_OR_Z = 0x0, + BMA400_EVAL_X_AND_Y_AND_Z = 0x1, +}; + +enum bma400_detect_criterion { + BMA400_DETECT_INACTIVITY = 0x0, + BMA400_DETECT_ACTIVITY = 0x1, +}; + +/* TAP config registers */ +#define BMA400_TAP_CONFIG_REG 0x57 +#define BMA400_TAP_CONFIG_SEN_MASK GENMASK(2, 0) + +#define BMA400_TAP_CONFIG1_REG 0x58 +#define BMA400_TAP_CONFIG1_TICSTH_MASK GENMASK(1, 0) +#define BMA400_TAP_CONFIG1_QUIET_MASK GENMASK(3, 2) +#define BMA400_TAP_CONFIG1_QUIETDT_MASK GENMASK(5, 4) +#define BMA400_TAP_TIM_LIST_LEN 4 -#define BMA400_NUM_REGULATORS 2 -#define BMA400_VDD_REGULATOR 0 -#define BMA400_VDDIO_REGULATOR 1 +#define BMA400_CMD_REG 0x7e +/* + * BMA400_SCALE_MIN macro value represents m/s^2 for 1 LSB before + * converting to micro values for +-2g range. + * + * For +-2g - 1 LSB = 0.976562 milli g = 0.009576 m/s^2 + * For +-4g - 1 LSB = 1.953125 milli g = 0.019153 m/s^2 + * For +-16g - 1 LSB = 7.8125 milli g = 0.076614 m/s^2 + * + * The raw value which is used to select the different ranges is determined + * by the first bit set position from the scale value, so BMA400_SCALE_MIN + * should be odd. + * + * Scale values for +-2g, +-4g, +-8g and +-16g are populated into bma400_scales + * array by left shifting BMA400_SCALE_MIN. + * e.g.: + * To select +-2g = 9577 << 0 = raw value to write is 0. + * To select +-8g = 9577 << 2 = raw value to write is 2. + * To select +-16g = 9577 << 3 = raw value to write is 3. + */ +#define BMA400_ACC_SCALE_MIN 9577 +#define BMA400_ACC_SCALE_MAX 76617 extern const struct regmap_config bma400_regmap_config; -int bma400_probe(struct device *dev, struct regmap *regmap, const char *name); - -void bma400_remove(struct device *dev); +int bma400_probe(struct device *dev, struct regmap *regmap, int irq, + const char *name); #endif |