diff options
Diffstat (limited to 'drivers/iio/adc/Kconfig')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 470 |
1 files changed, 417 insertions, 53 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 8db68b80b391..58da8255525e 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -6,6 +6,22 @@ menu "Analog to digital converters" +config IIO_ADC_HELPER + tristate + +config 88PM886_GPADC + tristate "Marvell 88PM886 GPADC driver" + depends on MFD_88PM886_PMIC + default MFD_88PM886_PMIC + help + Say Y here to enable support for the GPADC (General Purpose ADC) + found on the Marvell 88PM886 PMIC. The GPADC measures various + internal voltages and temperatures, including (but not limited to) + system, battery and USB Vbus. + + To compile this driver as a module, choose M here: the module will be + called 88pm886-gpadc. + config AB8500_GPADC bool "ST-Ericsson AB8500 GPADC driver" depends on AB8500_CORE && REGULATOR_AB8500 @@ -19,7 +35,54 @@ config AB8500_GPADC config AD_SIGMA_DELTA tristate select IIO_BUFFER + select IIO_BUFFER_DMAENGINE + select IIO_TRIGGERED_BUFFER + select SPI_OFFLOAD + +config AD4000 + tristate "Analog Devices AD4000 ADC Driver" + depends on SPI + select IIO_BUFFER + select IIO_BUFFER_DMAENGINE + select IIO_TRIGGERED_BUFFER + select SPI_OFFLOAD + help + Say yes here to build support for Analog Devices AD4000 high speed + SPI analog to digital converters (ADC). If intended to use with + SPI offloading support, it is recommended to enable + CONFIG_SPI_AXI_SPI_ENGINE, CONFIG_PWM_AXI_PWMGEN, and + CONFIG_SPI_OFFLOAD_TRIGGER_PWM. + + To compile this driver as a module, choose M here: the module will be + called ad4000. + +config AD4030 + tristate "Analog Devices AD4030 ADC Driver" + depends on SPI + depends on GPIOLIB + select REGMAP + select IIO_BUFFER select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Analog Devices AD4030 and AD4630 high speed + SPI analog to digital converters (ADC). + + To compile this driver as a module, choose M here: the module will be + called ad4030. + +config AD4080 + tristate "Analog Devices AD4080 high speed ADC" + depends on SPI + select REGMAP_SPI + select IIO_BACKEND + help + Say yes here to build support for Analog Devices AD4080 + high speed, low noise, low distortion, 20-bit, Easy Drive, + successive approximation register (SAR) analog-to-digital + converter (ADC). Supports iio_backended devices for AD4080. + + To compile this driver as a module, choose M here: the module will be + called ad4080. config AD4130 tristate "Analog Device AD4130 ADC Driver" @@ -36,6 +99,51 @@ config AD4130 To compile this driver as a module, choose M here: the module will be called ad4130. + +config AD4170_4 + tristate "Analog Device AD4170-4 ADC Driver" + depends on SPI + select REGMAP_SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on COMMON_CLK + depends on GPIOLIB + help + Say yes here to build support for Analog Devices AD4170-4 SPI analog + to digital converters (ADC). + + To compile this driver as a module, choose M here: the module will be + called ad4170-4. + +config AD4695 + tristate "Analog Device AD4695 ADC Driver" + depends on SPI + select IIO_BUFFER + select IIO_BUFFER_DMAENGINE + select IIO_TRIGGERED_BUFFER + select REGMAP + select SPI_OFFLOAD + help + Say yes here to build support for Analog Devices AD4695 and similar + analog to digital converters (ADC). + + To compile this driver as a module, choose M here: the module will be + called ad4695. + +config AD4851 + tristate "Analog Device AD4851 DAS Driver" + depends on SPI + depends on PWM + select REGMAP_SPI + select IIO_BACKEND + help + Say yes here to build support for Analog Devices AD4851, AD4852, + AD4853, AD4854, AD4855, AD4856, AD4857, AD4858, AD4858I high speed + data acquisition system (DAS). + + To compile this driver as a module, choose M here: the module will be + called ad4851. + config AD7091R tristate @@ -74,8 +182,9 @@ config AD7173 tristate "Analog Devices AD7173 driver" depends on SPI_MASTER select AD_SIGMA_DELTA - select GPIO_REGMAP if GPIOLIB - select REGMAP_SPI if GPIOLIB + select GPIOLIB + select GPIO_REGMAP + select REGMAP_SPI help Say yes here to build support for Analog Devices AD7173 and similar ADC Currently supported models: @@ -87,13 +196,28 @@ config AD7173 To compile this driver as a module, choose M here: the module will be called ad7173. +config AD7191 + tristate "Analog Devices AD7191 ADC driver" + depends on SPI + select AD_SIGMA_DELTA + help + Say yes here to build support for Analog Devices AD7191. + + To compile this driver as a module, choose M here: the + module will be called ad7191. + config AD7192 - tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" + tristate "Analog Devices AD7192 and similar ADC driver" depends on SPI select AD_SIGMA_DELTA help - Say yes here to build support for Analog Devices AD7190, - AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC). + Say yes here to build support for Analog Devices SPI analog to digital + converters (ADC): + - AD7190 + - AD7192 + - AD7193 + - AD7194 + - AD7195 If unsure, say N (but it's safe to say "Y"). To compile this driver as a module, choose M here: the @@ -155,6 +279,34 @@ config AD7298 To compile this driver as a module, choose M here: the module will be called ad7298. +config AD7380 + tristate "Analog Devices AD7380 ADC driver" + depends on SPI_MASTER + select SPI_OFFLOAD + select IIO_BUFFER + select IIO_BUFFER_DMAENGINE + select IIO_TRIGGER + select IIO_TRIGGERED_BUFFER + help + AD7380 is a family of simultaneous sampling ADCs that share the same + SPI register map and have similar pinouts. + + Say yes here to build support for Analog Devices AD7380 ADC and + similar chips. + + To compile this driver as a module, choose M here: the module will be + called ad7380. + +config AD7405 + tristate "Analog Device AD7405 ADC Driver" + depends on IIO_BACKEND + help + Say yes here to build support for Analog Devices AD7405, ADUM7701, + ADUM7702, ADUM7703 analog to digital converters (ADC). + + To compile this driver as a module, choose M here: the module will be + called ad7405. + config AD7476 tristate "Analog Devices AD7476 1-channel ADCs driver and other similar devices from AD and TI" depends on SPI @@ -180,17 +332,21 @@ config AD7606_IFACE_PARALLEL tristate "Analog Devices AD7606 ADC driver with parallel interface support" depends on HAS_IOPORT select AD7606 + select IIO_BACKEND help Say yes here to build parallel interface support for Analog Devices: ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). + It also support iio_backended devices for AD7606B. To compile this driver as a module, choose M here: the - module will be called ad7606_parallel. + module will be called ad7606_par. config AD7606_IFACE_SPI tristate "Analog Devices AD7606 ADC driver with spi interface support" depends on SPI select AD7606 + select IIO_BUFFER_DMAENGINE + select SPI_OFFLOAD help Say yes here to build spi interface support for Analog Devices: ad7605-4, ad7606, ad7606-6, ad7606-4 analog to digital converters (ADC). @@ -198,6 +354,22 @@ config AD7606_IFACE_SPI To compile this driver as a module, choose M here: the module will be called ad7606_spi. +config AD7625 + tristate "Analog Devices AD7625/AD7626 High Speed ADC driver" + depends on PWM + select IIO_BACKEND + help + Say yes here to build support for Analog Devices: + * AD7625 16-Bit, 6 MSPS PulSAR Analog-to-Digital Converter + * AD7626 16-Bit, 10 MSPS PulSAR Analog-to-Digital Converter + * AD7960 18-Bit, 5 MSPS PulSAR Analog-to-Digital Converter + * AD7961 16-Bit, 5 MSPS PulSAR Analog-to-Digital Converter + + The driver requires the assistance of the AXI ADC IP core to operate. + + To compile this driver as a module, choose M here: the module will be + called ad7625. + config AD7766 tristate "Analog Devices AD7766/AD7767 ADC driver" depends on SPI_MASTER @@ -213,6 +385,8 @@ config AD7766 config AD7768_1 tristate "Analog Devices AD7768-1 ADC driver" depends on SPI + select REGULATOR + select REGMAP_SPI select IIO_BUFFER select IIO_TRIGGER select IIO_TRIGGERED_BUFFER @@ -223,6 +397,19 @@ config AD7768_1 To compile this driver as a module, choose M here: the module will be called ad7768-1. +config AD7779 + tristate "Analog Devices AD7779 ADC driver" + depends on SPI + select CRC8 + select IIO_BUFFER + select IIO_BACKEND + help + Say yes here to build support for Analog Devices AD777X family + (AD7770, AD7771, AD7779) analog to digital converter (ADC). + + To compile this driver as a module, choose M here: the module will be + called ad7779. + config AD7780 tristate "Analog Devices AD7780 and similar ADCs driver" depends on SPI @@ -284,6 +471,10 @@ config AD7923 config AD7944 tristate "Analog Devices AD7944 and similar ADCs driver" depends on SPI + select SPI_OFFLOAD + select IIO_BUFFER + select IIO_BUFFER_DMAENGINE + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Analog Devices AD7944, AD7985, AD7986 ADCs. @@ -330,8 +521,28 @@ config AD9467 To compile this driver as a module, choose M here: the module will be called ad9467. +config ADE9000 + tristate "Analog Devices ADE9000 Multiphase Energy, and Power Quality Monitoring IC Driver" + depends on SPI + select REGMAP_SPI + select IIO_BUFFER + select IIO_KFIFO_BUF + help + Say yes here to build support for the Analog Devices ADE9000, + a highly accurate, multiphase energy and power quality monitoring + integrated circuit. + + The device features high-precision analog-to-digital converters + and digital signal processing to compute RMS values, power factor, + frequency, and harmonic analysis. It supports SPI communication + and provides buffered data output through the IIO framework. + + To compile this driver as a module, choose M here: the module will + be called ade9000. + config ADI_AXI_ADC tristate "Analog Devices Generic AXI ADC IP core driver" + depends on MICROBLAZE || NIOS2 || ARCH_ZYNQ || ARCH_ZYNQMP || ARCH_INTEL_SOCFPGA || COMPILE_TEST select IIO_BUFFER select IIO_BUFFER_HW_CONSUMER select IIO_BUFFER_DMAENGINE @@ -526,6 +737,16 @@ config FSL_MX25_ADC Generic Conversion Queue driver used for general purpose ADC in the MX25. This driver supports single measurements using the MX25 ADC. +config GEHC_PMC_ADC + tristate "GE HealthCare PMC ADC driver" + depends on I2C + help + Say yes here to build support for the GE HealthCare PMC 16-bit + 16-Channel ADC. + + To compile this driver as a module, choose M here: the module will be + called gehc-pmc-adc. + config HI8435 tristate "Holt Integrated Circuits HI-8435 threshold detector" select IIO_TRIGGERED_EVENT @@ -578,6 +799,17 @@ config INGENIC_ADC This driver can also be built as a module. If so, the module will be called ingenic_adc. +config INTEL_DC_TI_ADC + tristate "Intel Bay Trail / Cherry Trail Dollar Cove TI ADC driver" + depends on INTEL_SOC_PMIC_CHTDC_TI + help + Say yes here to have support for the Dollar Cove TI PMIC ADC device. + Depending on platform configuration, this general purpose ADC can be + used for sensors such as battery voltage and thermal resistors. + + To compile this driver as a module, choose M here: the module will be + called intel_dc_ti_adc. + config INTEL_MRFLD_ADC tristate "Intel Merrifield Basin Cove ADC driver" depends on INTEL_SOC_PMIC_MRFLD @@ -788,6 +1020,16 @@ config MAX1363 To compile this driver as a module, choose M here: the module will be called max1363. +config MAX14001 + tristate "Analog Devices MAX14001/MAX14002 ADC driver" + depends on SPI + help + Say yes here to build support for Analog Devices MAX14001/MAX14002 + Configurable, Isolated 10-bit ADCs for Multi-Range Binary Inputs. + + To compile this driver as a module, choose M here: the module will be + called max14001. + config MAX34408 tristate "Maxim max34408/max344089 ADC driver" depends on I2C @@ -870,6 +1112,18 @@ config MCP3911 This driver can also be built as a module. If so, the module will be called mcp3911. +config MEDIATEK_MT6359_AUXADC + tristate "MediaTek MT6359 PMIC AUXADC driver" + depends on MFD_MT6397 + help + Say yes here to enable support for MediaTek MT6357, MT6358 and + MT6359 PMICs Auxiliary ADC. + This driver provides multiple channels for system monitoring, + such as battery voltage, PMIC temperature, and others. + + This driver can also be built as a module. If so, the module will be + called mt6359-auxadc. + config MEDIATEK_MT6360_ADC tristate "Mediatek MT6360 ADC driver" depends on MFD_MT6360 @@ -947,6 +1201,17 @@ config NAU7802 To compile this driver as a module, choose M here: the module will be called nau7802. +config NCT7201 + tristate "Nuvoton Instruments NCT7201 and NCT7202 Power Monitor" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the Nuvoton NCT7201 and + NCT7202 Voltage Monitor. + + This driver can also be built as a module. If so, the module + will be called nct7201. + config NPCM_ADC tristate "Nuvoton NPCM ADC driver" depends on ARCH_NPCM || COMPILE_TEST @@ -957,6 +1222,19 @@ config NPCM_ADC This driver can also be built as a module. If so, the module will be called npcm_adc. +config PAC1921 + tristate "Microchip Technology PAC1921 driver" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for Microchip Technology's PAC1921 + High-Side Power/Current Monitor with Analog Output. + + This driver can also be built as a module. If so, the module + will be called pac1921. + config PAC1934 tristate "Microchip Technology PAC1934 driver" depends on I2C @@ -1074,6 +1352,28 @@ config RN5T618_ADC This driver can also be built as a module. If so, the module will be called rn5t618-adc. +config ROHM_BD79112 + tristate "Rohm BD79112 ADC driver" + depends on SPI && GPIOLIB + select REGMAP_SPI + select IIO_ADC_HELPER + help + Say yes here to build support for the ROHM BD79112 ADC. The + ROHM BD79112 is a 12-bit, 32-channel, SAR ADC. Analog inputs + can also be used for GPIO. + +config ROHM_BD79124 + tristate "Rohm BD79124 ADC driver" + depends on I2C && GPIOLIB + select REGMAP_I2C + select IIO_ADC_HELPER + help + Say yes here to build support for the ROHM BD79124 ADC. The + ROHM BD79124 is a 12-bit, 8-channel, SAR ADC. The ADC supports + also an automatic measurement mode, with an alarm interrupt for + out-of-window measurements. The window is configurable for each + channel. + config ROCKCHIP_SARADC tristate "Rockchip SARADC driver" depends on ARCH_ROCKCHIP || COMPILE_TEST @@ -1105,6 +1405,7 @@ config RICHTEK_RTQ6056 config RZG2L_ADC tristate "Renesas RZ/G2L ADC driver" depends on ARCH_RZG2L || COMPILE_TEST + select IIO_ADC_HELPER help Say yes here to build support for the ADC found in Renesas RZ/G2L family. @@ -1112,6 +1413,27 @@ config RZG2L_ADC To compile this driver as a module, choose M here: the module will be called rzg2l_adc. +config RZN1_ADC + tristate "Renesas RZ/N1 ADC driver" + depends on ARCH_RZN1 || COMPILE_TEST + help + Say yes here to build support for the ADC found in Renesas + RZ/N1 family. + + To compile this driver as a module, choose M here: the + module will be called rzn1-adc. + +config RZT2H_ADC + tristate "Renesas RZ/T2H / RZ/N2H ADC driver" + depends on ARCH_RENESAS || COMPILE_TEST + select IIO_ADC_HELPER + help + Say yes here to build support for the ADC found in Renesas + RZ/T2H / RZ/N2H SoCs. + + To compile this driver as a module, choose M here: the + module will be called rzt2h_adc. + config SC27XX_ADC tristate "Spreadtrum SC27xx series PMICs ADC" depends on MFD_SC27XX_PMIC || COMPILE_TEST @@ -1122,6 +1444,16 @@ config SC27XX_ADC This driver can also be built as a module. If so, the module will be called sc27xx_adc. +config SOPHGO_CV1800B_ADC + tristate "Sophgo CV1800B SARADC" + depends on ARCH_SOPHGO || COMPILE_TEST + help + Say yes here to build support for the SARADC integrated inside + the Sophgo CV1800B SoC. + + This driver can also be built as a module. If so, the module + will be called sophgo_cv1800b_adc. + config SPEAR_ADC tristate "ST SPEAr ADC" depends on PLAT_SPEAR || COMPILE_TEST @@ -1137,6 +1469,7 @@ config SD_ADC_MODULATOR tristate "Generic sigma delta modulator" select IIO_BUFFER select IIO_TRIGGERED_BUFFER + select IIO_BACKEND help Select this option to enables sigma delta modulator. This driver can support generic sigma delta modulators. @@ -1191,6 +1524,7 @@ config STM32_DFSDM_ADC select IIO_BUFFER select IIO_BUFFER_HW_CONSUMER select IIO_TRIGGERED_BUFFER + select IIO_BACKEND help Select this option to support ADCSigma delta modulator for STMicroelectronics STM32 digital filter for sigma delta converter. @@ -1227,6 +1561,7 @@ config SUN4I_GPADC config SUN20I_GPADC tristate "Allwinner D1/T113s/T507/R329 and similar GPADCs driver" depends on ARCH_SUNXI || COMPILE_TEST + select IIO_ADC_HELPER help Say yes here to build support for Allwinner (D1, T113, T507 and R329) SoCs GPADC. This ADC provides up to 16 channels. @@ -1270,18 +1605,6 @@ config TI_ADC084S021 This driver can also be built as a module. If so, the module will be called ti-adc084s021. -config TI_ADC12138 - tristate "Texas Instruments ADC12130/ADC12132/ADC12138" - depends on SPI - select IIO_BUFFER - select IIO_TRIGGERED_BUFFER - help - If you say yes here you get support for Texas Instruments ADC12130, - ADC12132 and ADC12138 chips. - - This driver can also be built as a module. If so, the module will be - called ti-adc12138. - config TI_ADC108S102 tristate "Texas Instruments ADC108S102 and ADC128S102 driver" depends on SPI @@ -1294,12 +1617,24 @@ config TI_ADC108S102 To compile this driver as a module, choose M here: the module will be called ti-adc108s102. +config TI_ADC12138 + tristate "Texas Instruments ADC12130/ADC12132/ADC12138" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for Texas Instruments ADC12130, + ADC12132 and ADC12138 chips. + + This driver can also be built as a module. If so, the module will be + called ti-adc12138. + config TI_ADC128S052 tristate "Texas Instruments ADC128S052/ADC122S021/ADC124S021" depends on SPI help If you say yes here you get support for Texas Instruments ADC128S052, - ADC122S021 and ADC124S021 chips. + ADC122S021, ADC124S021 and ROHM Semiconductor BD79104 chips. This driver can also be built as a module. If so, the module will be called ti-adc128s052. @@ -1329,17 +1664,6 @@ config TI_ADS1015 This driver can also be built as a module. If so, the module will be called ti-ads1015. -config TI_ADS7924 - tristate "Texas Instruments ADS7924 ADC" - depends on I2C - select REGMAP_I2C - help - If you say yes here you get support for Texas Instruments ADS7924 - 4 channels, 12-bit I2C ADC chip. - - This driver can also be built as a module. If so, the module will be - called ti-ads7924. - config TI_ADS1100 tristate "Texas Instruments ADS1100 and ADS1000 ADC" depends on I2C @@ -1350,10 +1674,35 @@ config TI_ADS1100 This driver can also be built as a module. If so, the module will be called ti-ads1100. +config TI_ADS1119 + tristate "Texas Instruments ADS1119 ADC" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for Texas Instruments ADS1119 + ADC chip. + + This driver can also be built as a module. If so, the module will be + called ti-ads1119. + +config TI_ADS124S08 + tristate "Texas Instruments ADS124S08" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say yes here you get support for Texas Instruments ADS124S08 + and ADS124S06 ADC chips + + This driver can also be built as a module. If so, the module will be + called ti-ads124s08. + config TI_ADS1298 tristate "Texas Instruments ADS1298" depends on SPI select IIO_BUFFER + select IIO_KFIFO_BUF help If you say yes here you get support for Texas Instruments ADS1298 medical ADC chips @@ -1361,6 +1710,39 @@ config TI_ADS1298 This driver can also be built as a module. If so, the module will be called ti-ads1298. +config TI_ADS131E08 + tristate "Texas Instruments ADS131E08" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to get support for Texas Instruments ADS131E04, ADS131E06 + and ADS131E08 chips. + + This driver can also be built as a module. If so, the module will be + called ti-ads131e08. + +config TI_ADS7138 + tristate "Texas Instruments ADS7128 and ADS7138 ADC driver" + depends on I2C + help + If you say yes here you get support for Texas Instruments ADS7128 and + ADS7138 8-channel A/D converters with 12-bit resolution. + + This driver can also be built as a module. If so, the module will be + called ti-ads7138. + +config TI_ADS7924 + tristate "Texas Instruments ADS7924 ADC" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments ADS7924 + 4 channels, 12-bit I2C ADC chip. + + This driver can also be built as a module. If so, the module will be + called ti-ads7924. + config TI_ADS7950 tristate "Texas Instruments ADS7950 ADC driver" depends on SPI && GPIOLIB @@ -1387,6 +1769,8 @@ config TI_ADS8344 config TI_ADS8688 tristate "Texas Instruments ADS8688" depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help If you say yes here you get support for Texas Instruments ADS8684 and and ADS8688 ADC chips @@ -1394,28 +1778,6 @@ config TI_ADS8688 This driver can also be built as a module. If so, the module will be called ti-ads8688. -config TI_ADS124S08 - tristate "Texas Instruments ADS124S08" - depends on SPI - help - If you say yes here you get support for Texas Instruments ADS124S08 - and ADS124S06 ADC chips - - This driver can also be built as a module. If so, the module will be - called ti-ads124s08. - -config TI_ADS131E08 - tristate "Texas Instruments ADS131E08" - depends on SPI - select IIO_BUFFER - select IIO_TRIGGERED_BUFFER - help - Say yes here to get support for Texas Instruments ADS131E04, ADS131E06 - and ADS131E08 chips. - - This driver can also be built as a module. If so, the module will be - called ti-ads131e08. - config TI_AM335X_ADC tristate "TI's AM335X ADC driver" depends on MFD_TI_AM335X_TSCADC && HAS_DMA @@ -1431,6 +1793,9 @@ config TI_AM335X_ADC config TI_LMP92064 tristate "Texas Instruments LMP92064 ADC driver" depends on SPI + select REGMAP_SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for the LMP92064 Precision Current and Voltage sensor. @@ -1475,7 +1840,6 @@ config TWL4030_MADC config TWL6030_GPADC tristate "TWL6030 GPADC (General Purpose A/D Converter) Support" depends on TWL4030_CORE - default n help Say yes here if you want support for the TWL6030/TWL6032 General Purpose A/D Converter. This will add support for battery type |