diff options
Diffstat (limited to 'drivers/iio/adc/ad7606_par.c')
| -rw-r--r-- | drivers/iio/adc/ad7606_par.c | 183 |
1 files changed, 164 insertions, 19 deletions
diff --git a/drivers/iio/adc/ad7606_par.c b/drivers/iio/adc/ad7606_par.c index d8408052262e..64733b607aa8 100644 --- a/drivers/iio/adc/ad7606_par.c +++ b/drivers/iio/adc/ad7606_par.c @@ -2,27 +2,124 @@ /* * AD7606 Parallel Interface ADC driver * - * Copyright 2011 Analog Devices Inc. + * Copyright 2011 - 2024 Analog Devices Inc. + * Copyright 2024 BayLibre SAS. */ +#include <linux/err.h> +#include <linux/gpio/consumer.h> +#include <linux/io.h> #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/property.h> #include <linux/types.h> -#include <linux/err.h> -#include <linux/io.h> +#include <linux/iio/backend.h> #include <linux/iio/iio.h> + #include "ad7606.h" +static const struct iio_chan_spec ad7606b_bi_channels[] = { + AD7606_BI_CHANNEL(0), + AD7606_BI_CHANNEL(1), + AD7606_BI_CHANNEL(2), + AD7606_BI_CHANNEL(3), + AD7606_BI_CHANNEL(4), + AD7606_BI_CHANNEL(5), + AD7606_BI_CHANNEL(6), + AD7606_BI_CHANNEL(7), +}; + +static int ad7606_bi_update_scan_mode(struct iio_dev *indio_dev, const unsigned long *scan_mask) +{ + struct ad7606_state *st = iio_priv(indio_dev); + unsigned int c, ret; + + for (c = 0; c < indio_dev->num_channels; c++) { + if (test_bit(c, scan_mask)) + ret = iio_backend_chan_enable(st->back, c); + else + ret = iio_backend_chan_disable(st->back, c); + if (ret) + return ret; + } + + return 0; +} + +static int ad7606_bi_setup_iio_backend(struct device *dev, struct iio_dev *indio_dev) +{ + struct ad7606_state *st = iio_priv(indio_dev); + unsigned int ret, c; + struct iio_backend_data_fmt data = { + .sign_extend = true, + .enable = true, + }; + + st->back = devm_iio_backend_get(dev, NULL); + if (IS_ERR(st->back)) + return PTR_ERR(st->back); + + /* If the device is iio_backend powered the PWM is mandatory */ + if (!st->cnvst_pwm) + return dev_err_probe(st->dev, -EINVAL, + "A PWM is mandatory when using backend.\n"); + + ret = devm_iio_backend_request_buffer(dev, st->back, indio_dev); + if (ret) + return ret; + + ret = devm_iio_backend_enable(dev, st->back); + if (ret) + return ret; + + for (c = 0; c < indio_dev->num_channels; c++) { + ret = iio_backend_data_format_set(st->back, c, &data); + if (ret) + return ret; + } + + indio_dev->channels = ad7606b_bi_channels; + indio_dev->num_channels = 8; + + return 0; +} + +static const struct ad7606_bus_ops ad7606_bi_bops = { + .iio_backend_config = ad7606_bi_setup_iio_backend, + .update_scan_mode = ad7606_bi_update_scan_mode, +}; + static int ad7606_par16_read_block(struct device *dev, int count, void *buf) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad7606_state *st = iio_priv(indio_dev); - insw((unsigned long)st->base_address, buf, count); + /* + * On the parallel interface, the frstdata signal is set to high while + * and after reading the sample of the first channel and low for all + * other channels. This can be used to check that the incoming data is + * correctly aligned. During normal operation the data should never + * become unaligned, but some glitch or electrostatic discharge might + * cause an extra read or clock cycle. Monitoring the frstdata signal + * allows to recover from such failure situations. + */ + int num = count; + u16 *_buf = buf; + + if (st->gpio_frstdata) { + insw((unsigned long)st->base_address, _buf, 1); + if (!gpiod_get_value(st->gpio_frstdata)) { + ad7606_reset(st); + return -EIO; + } + _buf++; + num--; + } + insw((unsigned long)st->base_address, _buf, num); return 0; } @@ -35,8 +132,28 @@ static int ad7606_par8_read_block(struct device *dev, { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct ad7606_state *st = iio_priv(indio_dev); - - insb((unsigned long)st->base_address, buf, count * 2); + /* + * On the parallel interface, the frstdata signal is set to high while + * and after reading the sample of the first channel and low for all + * other channels. This can be used to check that the incoming data is + * correctly aligned. During normal operation the data should never + * become unaligned, but some glitch or electrostatic discharge might + * cause an extra read or clock cycle. Monitoring the frstdata signal + * allows to recover from such failure situations. + */ + int num = count; + u16 *_buf = buf; + + if (st->gpio_frstdata) { + insb((unsigned long)st->base_address, _buf, 2); + if (!gpiod_get_value(st->gpio_frstdata)) { + ad7606_reset(st); + return -EIO; + } + _buf++; + num--; + } + insb((unsigned long)st->base_address, _buf, num * 2); return 0; } @@ -47,12 +164,32 @@ static const struct ad7606_bus_ops ad7606_par8_bops = { static int ad7606_par_probe(struct platform_device *pdev) { - const struct platform_device_id *id = platform_get_device_id(pdev); + const struct ad7606_chip_info *chip_info; + const struct platform_device_id *id; struct resource *res; void __iomem *addr; resource_size_t remap_size; int irq; + /* + * If a firmware node is available (ACPI or DT), platform_device_id is null + * and we must use get_match_data. + */ + if (dev_fwnode(&pdev->dev)) { + chip_info = device_get_match_data(&pdev->dev); + if (device_property_present(&pdev->dev, "io-backends")) + /* + * If a backend is available ,call the core probe with backend + * bops, otherwise use the former bops. + */ + return ad7606_probe(&pdev->dev, 0, NULL, + chip_info, + &ad7606_bi_bops); + } else { + id = platform_get_device_id(pdev); + chip_info = (const struct ad7606_chip_info *)id->driver_data; + } + irq = platform_get_irq(pdev, 0); if (irq < 0) return irq; @@ -63,27 +200,34 @@ static int ad7606_par_probe(struct platform_device *pdev) remap_size = resource_size(res); - return ad7606_probe(&pdev->dev, irq, addr, - id->name, id->driver_data, + return ad7606_probe(&pdev->dev, irq, addr, chip_info, remap_size > 1 ? &ad7606_par16_bops : &ad7606_par8_bops); } static const struct platform_device_id ad7606_driver_ids[] = { - { .name = "ad7605-4", .driver_data = ID_AD7605_4, }, - { .name = "ad7606-4", .driver_data = ID_AD7606_4, }, - { .name = "ad7606-6", .driver_data = ID_AD7606_6, }, - { .name = "ad7606-8", .driver_data = ID_AD7606_8, }, + { .name = "ad7605-4", .driver_data = (kernel_ulong_t)&ad7605_4_info, }, + { .name = "ad7606-4", .driver_data = (kernel_ulong_t)&ad7606_4_info, }, + { .name = "ad7606-6", .driver_data = (kernel_ulong_t)&ad7606_6_info, }, + { .name = "ad7606-8", .driver_data = (kernel_ulong_t)&ad7606_8_info, }, + { .name = "ad7606b", .driver_data = (kernel_ulong_t)&ad7606b_info, }, + { .name = "ad7607", .driver_data = (kernel_ulong_t)&ad7607_info, }, + { .name = "ad7608", .driver_data = (kernel_ulong_t)&ad7608_info, }, + { .name = "ad7609", .driver_data = (kernel_ulong_t)&ad7609_info, }, { } }; MODULE_DEVICE_TABLE(platform, ad7606_driver_ids); static const struct of_device_id ad7606_of_match[] = { - { .compatible = "adi,ad7605-4" }, - { .compatible = "adi,ad7606-4" }, - { .compatible = "adi,ad7606-6" }, - { .compatible = "adi,ad7606-8" }, - { }, + { .compatible = "adi,ad7605-4", .data = &ad7605_4_info }, + { .compatible = "adi,ad7606-4", .data = &ad7606_4_info }, + { .compatible = "adi,ad7606-6", .data = &ad7606_6_info }, + { .compatible = "adi,ad7606-8", .data = &ad7606_8_info }, + { .compatible = "adi,ad7606b", .data = &ad7606b_info }, + { .compatible = "adi,ad7607", .data = &ad7607_info }, + { .compatible = "adi,ad7608", .data = &ad7608_info }, + { .compatible = "adi,ad7609", .data = &ad7609_info }, + { } }; MODULE_DEVICE_TABLE(of, ad7606_of_match); @@ -101,4 +245,5 @@ module_platform_driver(ad7606_driver); MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); MODULE_DESCRIPTION("Analog Devices AD7606 ADC"); MODULE_LICENSE("GPL v2"); -MODULE_IMPORT_NS(IIO_AD7606); +MODULE_IMPORT_NS("IIO_AD7606"); +MODULE_IMPORT_NS("IIO_BACKEND"); |