diff options
Diffstat (limited to 'drivers/iio/adc/ad7768-1.c')
| -rw-r--r-- | drivers/iio/adc/ad7768-1.c | 1435 |
1 files changed, 1435 insertions, 0 deletions
diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c new file mode 100644 index 000000000000..d96802b7847a --- /dev/null +++ b/drivers/iio/adc/ad7768-1.c @@ -0,0 +1,1435 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Analog Devices AD7768-1 SPI ADC driver + * + * Copyright 2017 Analog Devices Inc. + */ +#include <linux/array_size.h> +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/minmax.h> +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/regulator/driver.h> +#include <linux/sysfs.h> +#include <linux/spi/spi.h> +#include <linux/unaligned.h> +#include <linux/units.h> +#include <linux/util_macros.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> + +#include <dt-bindings/iio/adc/adi,ad7768-1.h> + +/* AD7768 registers definition */ +#define AD7768_REG_CHIP_TYPE 0x3 +#define AD7768_REG_PROD_ID_L 0x4 +#define AD7768_REG_PROD_ID_H 0x5 +#define AD7768_REG_CHIP_GRADE 0x6 +#define AD7768_REG_SCRATCH_PAD 0x0A +#define AD7768_REG_VENDOR_L 0x0C +#define AD7768_REG_VENDOR_H 0x0D +#define AD7768_REG_INTERFACE_FORMAT 0x14 +#define AD7768_REG_POWER_CLOCK 0x15 +#define AD7768_REG_ANALOG 0x16 +#define AD7768_REG_ANALOG2 0x17 +#define AD7768_REG_CONVERSION 0x18 +#define AD7768_REG_DIGITAL_FILTER 0x19 +#define AD7768_REG_SINC3_DEC_RATE_MSB 0x1A +#define AD7768_REG_SINC3_DEC_RATE_LSB 0x1B +#define AD7768_REG_DUTY_CYCLE_RATIO 0x1C +#define AD7768_REG_SYNC_RESET 0x1D +#define AD7768_REG_GPIO_CONTROL 0x1E +#define AD7768_REG_GPIO_WRITE 0x1F +#define AD7768_REG_GPIO_READ 0x20 +#define AD7768_REG_OFFSET_HI 0x21 +#define AD7768_REG_OFFSET_MID 0x22 +#define AD7768_REG_OFFSET_LO 0x23 +#define AD7768_REG_GAIN_HI 0x24 +#define AD7768_REG_GAIN_MID 0x25 +#define AD7768_REG_GAIN_LO 0x26 +#define AD7768_REG_SPI_DIAG_ENABLE 0x28 +#define AD7768_REG_ADC_DIAG_ENABLE 0x29 +#define AD7768_REG_DIG_DIAG_ENABLE 0x2A +#define AD7768_REG24_ADC_DATA 0x2C +#define AD7768_REG_MASTER_STATUS 0x2D +#define AD7768_REG_SPI_DIAG_STATUS 0x2E +#define AD7768_REG_ADC_DIAG_STATUS 0x2F +#define AD7768_REG_DIG_DIAG_STATUS 0x30 +#define AD7768_REG_MCLK_COUNTER 0x31 +#define AD7768_REG_COEFF_CONTROL 0x32 +#define AD7768_REG24_COEFF_DATA 0x33 +#define AD7768_REG_ACCESS_KEY 0x34 + +/* AD7768_REG_POWER_CLOCK */ +#define AD7768_PWR_MCLK_DIV_MSK GENMASK(5, 4) +#define AD7768_PWR_MCLK_DIV(x) FIELD_PREP(AD7768_PWR_MCLK_DIV_MSK, x) +#define AD7768_PWR_PWRMODE_MSK GENMASK(1, 0) +#define AD7768_PWR_PWRMODE(x) FIELD_PREP(AD7768_PWR_PWRMODE_MSK, x) + +/* AD7768_REG_DIGITAL_FILTER */ +#define AD7768_DIG_FIL_EN_60HZ_REJ BIT(7) +#define AD7768_DIG_FIL_FIL_MSK GENMASK(6, 4) +#define AD7768_DIG_FIL_FIL(x) FIELD_PREP(AD7768_DIG_FIL_FIL_MSK, x) +#define AD7768_DIG_FIL_DEC_MSK GENMASK(2, 0) +#define AD7768_DIG_FIL_DEC_RATE(x) FIELD_PREP(AD7768_DIG_FIL_DEC_MSK, x) + +/* AD7768_REG_CONVERSION */ +#define AD7768_CONV_MODE_MSK GENMASK(2, 0) +#define AD7768_CONV_MODE(x) FIELD_PREP(AD7768_CONV_MODE_MSK, x) + +/* AD7768_REG_ANALOG2 */ +#define AD7768_REG_ANALOG2_VCM_MSK GENMASK(2, 0) +#define AD7768_REG_ANALOG2_VCM(x) FIELD_PREP(AD7768_REG_ANALOG2_VCM_MSK, (x)) + +/* AD7768_REG_GPIO_CONTROL */ +#define AD7768_GPIO_UNIVERSAL_EN BIT(7) +#define AD7768_GPIO_CONTROL_MSK GENMASK(3, 0) + +/* AD7768_REG_GPIO_WRITE */ +#define AD7768_GPIO_WRITE_MSK GENMASK(3, 0) + +/* AD7768_REG_GPIO_READ */ +#define AD7768_GPIO_READ_MSK GENMASK(3, 0) + +#define AD7768_VCM_OFF 0x07 + +#define AD7768_TRIGGER_SOURCE_SYNC_IDX 0 + +#define AD7768_MAX_CHANNELS 1 + +enum ad7768_conv_mode { + AD7768_CONTINUOUS, + AD7768_ONE_SHOT, + AD7768_SINGLE, + AD7768_PERIODIC, + AD7768_STANDBY +}; + +enum ad7768_pwrmode { + AD7768_ECO_MODE = 0, + AD7768_MED_MODE = 2, + AD7768_FAST_MODE = 3 +}; + +enum ad7768_mclk_div { + AD7768_MCLK_DIV_16, + AD7768_MCLK_DIV_8, + AD7768_MCLK_DIV_4, + AD7768_MCLK_DIV_2 +}; + +enum ad7768_filter_type { + AD7768_FILTER_SINC5, + AD7768_FILTER_SINC3, + AD7768_FILTER_WIDEBAND, + AD7768_FILTER_SINC3_REJ60, +}; + +enum ad7768_filter_regval { + AD7768_FILTER_REGVAL_SINC5 = 0, + AD7768_FILTER_REGVAL_SINC5_X8 = 1, + AD7768_FILTER_REGVAL_SINC5_X16 = 2, + AD7768_FILTER_REGVAL_SINC3 = 3, + AD7768_FILTER_REGVAL_WIDEBAND = 4, + AD7768_FILTER_REGVAL_SINC3_REJ60 = 11, +}; + +enum ad7768_scan_type { + AD7768_SCAN_TYPE_NORMAL, + AD7768_SCAN_TYPE_HIGH_SPEED, +}; + +/* -3dB cutoff frequency multipliers (relative to ODR) for each filter type. */ +static const int ad7768_filter_3db_odr_multiplier[] = { + [AD7768_FILTER_SINC5] = 204, /* 0.204 */ + [AD7768_FILTER_SINC3] = 262, /* 0.2617 */ + [AD7768_FILTER_SINC3_REJ60] = 262, /* 0.2617 */ + [AD7768_FILTER_WIDEBAND] = 433, /* 0.433 */ +}; + +static const int ad7768_mclk_div_rates[] = { + 16, 8, 4, 2, +}; + +static const int ad7768_dec_rate_values[8] = { + 8, 16, 32, 64, 128, 256, 512, 1024, +}; + +/* Decimation rate range for sinc3 filter */ +static const int ad7768_sinc3_dec_rate_range[3] = { + 32, 32, 163840, +}; + +/* + * The AD7768-1 supports three primary filter types: + * Sinc5, Sinc3, and Wideband. + * However, the filter register values can also encode additional parameters + * such as decimation rates and 60Hz rejection. This utility array separates + * the filter type from these parameters. + */ +static const int ad7768_filter_regval_to_type[] = { + [AD7768_FILTER_REGVAL_SINC5] = AD7768_FILTER_SINC5, + [AD7768_FILTER_REGVAL_SINC5_X8] = AD7768_FILTER_SINC5, + [AD7768_FILTER_REGVAL_SINC5_X16] = AD7768_FILTER_SINC5, + [AD7768_FILTER_REGVAL_SINC3] = AD7768_FILTER_SINC3, + [AD7768_FILTER_REGVAL_WIDEBAND] = AD7768_FILTER_WIDEBAND, + [AD7768_FILTER_REGVAL_SINC3_REJ60] = AD7768_FILTER_SINC3_REJ60, +}; + +static const char * const ad7768_filter_enum[] = { + [AD7768_FILTER_SINC5] = "sinc5", + [AD7768_FILTER_SINC3] = "sinc3", + [AD7768_FILTER_WIDEBAND] = "wideband", + [AD7768_FILTER_SINC3_REJ60] = "sinc3+rej60", +}; + +static const struct iio_scan_type ad7768_scan_type[] = { + [AD7768_SCAN_TYPE_NORMAL] = { + .sign = 's', + .realbits = 24, + .storagebits = 32, + .shift = 8, + .endianness = IIO_BE, + }, + [AD7768_SCAN_TYPE_HIGH_SPEED] = { + .sign = 's', + .realbits = 16, + .storagebits = 16, + .endianness = IIO_BE, + }, +}; + +struct ad7768_state { + struct spi_device *spi; + struct regmap *regmap; + struct regmap *regmap24; + int vref_uv; + struct regulator_dev *vcm_rdev; + unsigned int vcm_output_sel; + struct clk *mclk; + unsigned int mclk_freq; + unsigned int mclk_div; + unsigned int oversampling_ratio; + enum ad7768_filter_type filter_type; + unsigned int samp_freq; + unsigned int samp_freq_avail[ARRAY_SIZE(ad7768_mclk_div_rates)]; + unsigned int samp_freq_avail_len; + struct completion completion; + struct iio_trigger *trig; + struct gpio_desc *gpio_sync_in; + struct gpio_desc *gpio_reset; + const char *labels[AD7768_MAX_CHANNELS]; + struct gpio_chip gpiochip; + bool en_spi_sync; + /* + * DMA (thus cache coherency maintenance) may require the + * transfer buffers to live in their own cache lines. + */ + union { + struct { + __be32 chan; + aligned_s64 timestamp; + } scan; + __be32 d32; + u8 d8[2]; + } data __aligned(IIO_DMA_MINALIGN); +}; + +static const struct regmap_range ad7768_regmap_rd_ranges[] = { + regmap_reg_range(AD7768_REG_CHIP_TYPE, AD7768_REG_CHIP_GRADE), + regmap_reg_range(AD7768_REG_SCRATCH_PAD, AD7768_REG_SCRATCH_PAD), + regmap_reg_range(AD7768_REG_VENDOR_L, AD7768_REG_VENDOR_H), + regmap_reg_range(AD7768_REG_INTERFACE_FORMAT, AD7768_REG_GAIN_LO), + regmap_reg_range(AD7768_REG_SPI_DIAG_ENABLE, AD7768_REG_DIG_DIAG_ENABLE), + regmap_reg_range(AD7768_REG_MASTER_STATUS, AD7768_REG_COEFF_CONTROL), + regmap_reg_range(AD7768_REG_ACCESS_KEY, AD7768_REG_ACCESS_KEY), +}; + +static const struct regmap_access_table ad7768_regmap_rd_table = { + .yes_ranges = ad7768_regmap_rd_ranges, + .n_yes_ranges = ARRAY_SIZE(ad7768_regmap_rd_ranges), +}; + +static const struct regmap_range ad7768_regmap_wr_ranges[] = { + regmap_reg_range(AD7768_REG_SCRATCH_PAD, AD7768_REG_SCRATCH_PAD), + regmap_reg_range(AD7768_REG_INTERFACE_FORMAT, AD7768_REG_GPIO_WRITE), + regmap_reg_range(AD7768_REG_OFFSET_HI, AD7768_REG_GAIN_LO), + regmap_reg_range(AD7768_REG_SPI_DIAG_ENABLE, AD7768_REG_DIG_DIAG_ENABLE), + regmap_reg_range(AD7768_REG_SPI_DIAG_STATUS, AD7768_REG_SPI_DIAG_STATUS), + regmap_reg_range(AD7768_REG_COEFF_CONTROL, AD7768_REG_COEFF_CONTROL), + regmap_reg_range(AD7768_REG_ACCESS_KEY, AD7768_REG_ACCESS_KEY), +}; + +static const struct regmap_access_table ad7768_regmap_wr_table = { + .yes_ranges = ad7768_regmap_wr_ranges, + .n_yes_ranges = ARRAY_SIZE(ad7768_regmap_wr_ranges), +}; + +static const struct regmap_config ad7768_regmap_config = { + .name = "ad7768-1-8", + .reg_bits = 8, + .val_bits = 8, + .read_flag_mask = BIT(6), + .rd_table = &ad7768_regmap_rd_table, + .wr_table = &ad7768_regmap_wr_table, + .max_register = AD7768_REG_ACCESS_KEY, + .use_single_write = true, + .use_single_read = true, +}; + +static const struct regmap_range ad7768_regmap24_rd_ranges[] = { + regmap_reg_range(AD7768_REG24_ADC_DATA, AD7768_REG24_ADC_DATA), + regmap_reg_range(AD7768_REG24_COEFF_DATA, AD7768_REG24_COEFF_DATA), +}; + +static const struct regmap_access_table ad7768_regmap24_rd_table = { + .yes_ranges = ad7768_regmap24_rd_ranges, + .n_yes_ranges = ARRAY_SIZE(ad7768_regmap24_rd_ranges), +}; + +static const struct regmap_range ad7768_regmap24_wr_ranges[] = { + regmap_reg_range(AD7768_REG24_COEFF_DATA, AD7768_REG24_COEFF_DATA), +}; + +static const struct regmap_access_table ad7768_regmap24_wr_table = { + .yes_ranges = ad7768_regmap24_wr_ranges, + .n_yes_ranges = ARRAY_SIZE(ad7768_regmap24_wr_ranges), +}; + +static const struct regmap_config ad7768_regmap24_config = { + .name = "ad7768-1-24", + .reg_bits = 8, + .val_bits = 24, + .read_flag_mask = BIT(6), + .rd_table = &ad7768_regmap24_rd_table, + .wr_table = &ad7768_regmap24_wr_table, + .max_register = AD7768_REG24_COEFF_DATA, +}; + +static int ad7768_send_sync_pulse(struct ad7768_state *st) +{ + if (st->en_spi_sync) + return regmap_write(st->regmap, AD7768_REG_SYNC_RESET, 0x00); + + /* + * The datasheet specifies a minimum SYNC_IN pulse width of 1.5 × Tmclk, + * where Tmclk is the MCLK period. The supported MCLK frequencies range + * from 0.6 MHz to 17 MHz, which corresponds to a minimum SYNC_IN pulse + * width of approximately 2.5 µs in the worst-case scenario (0.6 MHz). + * + * Add a delay to ensure the pulse width is always sufficient to + * trigger synchronization. + */ + gpiod_set_value_cansleep(st->gpio_sync_in, 1); + fsleep(3); + gpiod_set_value_cansleep(st->gpio_sync_in, 0); + + return 0; +} + +static void ad7768_fill_samp_freq_tbl(struct ad7768_state *st) +{ + unsigned int i, samp_freq_avail, freq_filtered; + unsigned int len = 0; + + freq_filtered = DIV_ROUND_CLOSEST(st->mclk_freq, st->oversampling_ratio); + for (i = 0; i < ARRAY_SIZE(ad7768_mclk_div_rates); i++) { + samp_freq_avail = DIV_ROUND_CLOSEST(freq_filtered, ad7768_mclk_div_rates[i]); + /* Sampling frequency cannot be lower than the minimum of 50 SPS */ + if (samp_freq_avail < 50) + continue; + + st->samp_freq_avail[len++] = samp_freq_avail; + } + + st->samp_freq_avail_len = len; +} + +static int ad7768_set_mclk_div(struct ad7768_state *st, unsigned int mclk_div) +{ + unsigned int mclk_div_value; + + mclk_div_value = AD7768_PWR_MCLK_DIV(mclk_div); + /* + * Set power mode based on mclk_div value. + * ECO_MODE is only recommended for MCLK_DIV = 16. + */ + mclk_div_value |= mclk_div > AD7768_MCLK_DIV_16 ? + AD7768_PWR_PWRMODE(AD7768_FAST_MODE) : + AD7768_PWR_PWRMODE(AD7768_ECO_MODE); + + return regmap_update_bits(st->regmap, AD7768_REG_POWER_CLOCK, + AD7768_PWR_MCLK_DIV_MSK | AD7768_PWR_PWRMODE_MSK, + mclk_div_value); +} + +static int ad7768_set_mode(struct ad7768_state *st, + enum ad7768_conv_mode mode) +{ + return regmap_update_bits(st->regmap, AD7768_REG_CONVERSION, + AD7768_CONV_MODE_MSK, AD7768_CONV_MODE(mode)); +} + +static int ad7768_scan_direct(struct iio_dev *indio_dev) +{ + struct ad7768_state *st = iio_priv(indio_dev); + int readval, ret; + + reinit_completion(&st->completion); + + ret = ad7768_set_mode(st, AD7768_ONE_SHOT); + if (ret < 0) + return ret; + + ret = wait_for_completion_timeout(&st->completion, + msecs_to_jiffies(1000)); + if (!ret) + return -ETIMEDOUT; + + ret = regmap_read(st->regmap24, AD7768_REG24_ADC_DATA, &readval); + if (ret) + return ret; + + /* + * When the decimation rate is set to x8, the ADC data precision is + * reduced from 24 bits to 16 bits. Since the AD7768_REG_ADC_DATA + * register provides 24-bit data, the precision is reduced by + * right-shifting the read value by 8 bits. + */ + if (st->oversampling_ratio == 8) + readval >>= 8; + + /* + * Any SPI configuration of the AD7768-1 can only be + * performed in continuous conversion mode. + */ + ret = ad7768_set_mode(st, AD7768_CONTINUOUS); + if (ret < 0) + return ret; + + return readval; +} + +static int ad7768_reg_access(struct iio_dev *indio_dev, + unsigned int reg, + unsigned int writeval, + unsigned int *readval) +{ + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = -EINVAL; + if (readval) { + if (regmap_check_range_table(st->regmap, reg, &ad7768_regmap_rd_table)) + ret = regmap_read(st->regmap, reg, readval); + + if (regmap_check_range_table(st->regmap24, reg, &ad7768_regmap24_rd_table)) + ret = regmap_read(st->regmap24, reg, readval); + + } else { + if (regmap_check_range_table(st->regmap, reg, &ad7768_regmap_wr_table)) + ret = regmap_write(st->regmap, reg, writeval); + + if (regmap_check_range_table(st->regmap24, reg, &ad7768_regmap24_wr_table)) + ret = regmap_write(st->regmap24, reg, writeval); + + } + + iio_device_release_direct(indio_dev); + + return ret; +} + +static int ad7768_set_sinc3_dec_rate(struct ad7768_state *st, + unsigned int dec_rate) +{ + unsigned int max_dec_rate; + u8 dec_rate_reg[2]; + u16 regval; + int ret; + + /* + * Maximum dec_rate is limited by the MCLK_DIV value and by the ODR. + * The edge case is for MCLK_DIV = 2, ODR = 50 SPS. + * max_dec_rate <= MCLK / (2 * 50) + */ + max_dec_rate = st->mclk_freq / 100; + dec_rate = clamp(dec_rate, 32, max_dec_rate); + /* + * Calculate the equivalent value to sinc3 decimation ratio + * to be written on the SINC3_DEC_RATE register: + * Value = (DEC_RATE / 32) - 1 + */ + dec_rate = DIV_ROUND_UP(dec_rate, 32) - 1; + + /* + * The SINC3_DEC_RATE value is a 13-bit value split across two + * registers: MSB [12:8] and LSB [7:0]. Prepare the 13-bit value using + * FIELD_PREP() and store it with the right endianness in dec_rate_reg. + */ + regval = FIELD_PREP(GENMASK(12, 0), dec_rate); + put_unaligned_be16(regval, dec_rate_reg); + ret = regmap_bulk_write(st->regmap, AD7768_REG_SINC3_DEC_RATE_MSB, + dec_rate_reg, 2); + if (ret) + return ret; + + st->oversampling_ratio = (dec_rate + 1) * 32; + + return 0; +} + +static int ad7768_configure_dig_fil(struct iio_dev *dev, + enum ad7768_filter_type filter_type, + unsigned int dec_rate) +{ + struct ad7768_state *st = iio_priv(dev); + unsigned int dec_rate_idx, dig_filter_regval; + int ret; + + switch (filter_type) { + case AD7768_FILTER_SINC3: + dig_filter_regval = AD7768_DIG_FIL_FIL(AD7768_FILTER_REGVAL_SINC3); + break; + case AD7768_FILTER_SINC3_REJ60: + dig_filter_regval = AD7768_DIG_FIL_FIL(AD7768_FILTER_REGVAL_SINC3) | + AD7768_DIG_FIL_EN_60HZ_REJ; + break; + case AD7768_FILTER_WIDEBAND: + /* Skip decimations 8 and 16, not supported by the wideband filter */ + dec_rate_idx = find_closest(dec_rate, &ad7768_dec_rate_values[2], + ARRAY_SIZE(ad7768_dec_rate_values) - 2); + dig_filter_regval = AD7768_DIG_FIL_FIL(AD7768_FILTER_REGVAL_WIDEBAND) | + AD7768_DIG_FIL_DEC_RATE(dec_rate_idx); + /* Correct the index offset */ + dec_rate_idx += 2; + break; + case AD7768_FILTER_SINC5: + dec_rate_idx = find_closest(dec_rate, ad7768_dec_rate_values, + ARRAY_SIZE(ad7768_dec_rate_values)); + + /* + * Decimations 8 (idx 0) and 16 (idx 1) are set in the + * FILTER[6:4] field. The other decimations are set in the + * DEC_RATE[2:0] field, and the idx needs to be offsetted by two. + */ + if (dec_rate_idx == 0) + dig_filter_regval = AD7768_DIG_FIL_FIL(AD7768_FILTER_REGVAL_SINC5_X8); + else if (dec_rate_idx == 1) + dig_filter_regval = AD7768_DIG_FIL_FIL(AD7768_FILTER_REGVAL_SINC5_X16); + else + dig_filter_regval = AD7768_DIG_FIL_FIL(AD7768_FILTER_REGVAL_SINC5) | + AD7768_DIG_FIL_DEC_RATE(dec_rate_idx - 2); + break; + } + + ret = regmap_write(st->regmap, AD7768_REG_DIGITAL_FILTER, dig_filter_regval); + if (ret) + return ret; + + st->filter_type = filter_type; + /* + * The decimation for SINC3 filters are configured in different + * registers. + */ + if (filter_type == AD7768_FILTER_SINC3 || + filter_type == AD7768_FILTER_SINC3_REJ60) { + ret = ad7768_set_sinc3_dec_rate(st, dec_rate); + if (ret) + return ret; + } else { + st->oversampling_ratio = ad7768_dec_rate_values[dec_rate_idx]; + } + + ad7768_fill_samp_freq_tbl(st); + + /* A sync-in pulse is required after every configuration change */ + return ad7768_send_sync_pulse(st); +} + +static int ad7768_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + struct iio_dev *indio_dev = gpiochip_get_data(chip); + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = regmap_clear_bits(st->regmap, AD7768_REG_GPIO_CONTROL, + BIT(offset)); + iio_device_release_direct(indio_dev); + + return ret; +} + +static int ad7768_gpio_direction_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct iio_dev *indio_dev = gpiochip_get_data(chip); + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = regmap_set_bits(st->regmap, AD7768_REG_GPIO_CONTROL, + BIT(offset)); + iio_device_release_direct(indio_dev); + + return ret; +} + +static int ad7768_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct iio_dev *indio_dev = gpiochip_get_data(chip); + struct ad7768_state *st = iio_priv(indio_dev); + unsigned int val; + int ret; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = regmap_read(st->regmap, AD7768_REG_GPIO_CONTROL, &val); + if (ret) + goto err_release; + + /* + * If the GPIO is configured as an output, read the current value from + * AD7768_REG_GPIO_WRITE. Otherwise, read the input value from + * AD7768_REG_GPIO_READ. + */ + if (val & BIT(offset)) + ret = regmap_read(st->regmap, AD7768_REG_GPIO_WRITE, &val); + else + ret = regmap_read(st->regmap, AD7768_REG_GPIO_READ, &val); + if (ret) + goto err_release; + + ret = !!(val & BIT(offset)); +err_release: + iio_device_release_direct(indio_dev); + + return ret; +} + +static int ad7768_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + struct iio_dev *indio_dev = gpiochip_get_data(chip); + struct ad7768_state *st = iio_priv(indio_dev); + unsigned int val; + int ret; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = regmap_read(st->regmap, AD7768_REG_GPIO_CONTROL, &val); + if (ret) + goto err_release; + + if (val & BIT(offset)) + ret = regmap_assign_bits(st->regmap, AD7768_REG_GPIO_WRITE, + BIT(offset), value); + +err_release: + iio_device_release_direct(indio_dev); + + return ret; +} + +static int ad7768_gpio_init(struct iio_dev *indio_dev) +{ + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + ret = regmap_write(st->regmap, AD7768_REG_GPIO_CONTROL, + AD7768_GPIO_UNIVERSAL_EN); + if (ret) + return ret; + + st->gpiochip = (struct gpio_chip) { + .label = "ad7768_1_gpios", + .base = -1, + .ngpio = 4, + .parent = &st->spi->dev, + .can_sleep = true, + .direction_input = ad7768_gpio_direction_input, + .direction_output = ad7768_gpio_direction_output, + .get = ad7768_gpio_get, + .set = ad7768_gpio_set, + .owner = THIS_MODULE, + }; + + return devm_gpiochip_add_data(&st->spi->dev, &st->gpiochip, indio_dev); +} + +static int ad7768_set_freq(struct ad7768_state *st, + unsigned int freq) +{ + unsigned int idx, mclk_div; + int ret; + + freq = clamp(freq, 50, 1024000); + + mclk_div = DIV_ROUND_CLOSEST(st->mclk_freq, freq * st->oversampling_ratio); + /* Find the closest match for the desired sampling frequency */ + idx = find_closest_descending(mclk_div, ad7768_mclk_div_rates, + ARRAY_SIZE(ad7768_mclk_div_rates)); + /* Set both the mclk_div and pwrmode */ + ret = ad7768_set_mclk_div(st, idx); + if (ret) + return ret; + + st->samp_freq = DIV_ROUND_CLOSEST(st->mclk_freq, + ad7768_mclk_div_rates[idx] * st->oversampling_ratio); + + /* A sync-in pulse is required after every configuration change */ + return ad7768_send_sync_pulse(st); +} + +static int ad7768_set_filter_type_attr(struct iio_dev *dev, + const struct iio_chan_spec *chan, + unsigned int filter) +{ + struct ad7768_state *st = iio_priv(dev); + int ret; + + ret = ad7768_configure_dig_fil(dev, filter, st->oversampling_ratio); + if (ret) + return ret; + + /* Update sampling frequency */ + return ad7768_set_freq(st, st->samp_freq); +} + +static int ad7768_get_filter_type_attr(struct iio_dev *dev, + const struct iio_chan_spec *chan) +{ + struct ad7768_state *st = iio_priv(dev); + int ret; + unsigned int mode, mask; + + ret = regmap_read(st->regmap, AD7768_REG_DIGITAL_FILTER, &mode); + if (ret) + return ret; + + mask = AD7768_DIG_FIL_EN_60HZ_REJ | AD7768_DIG_FIL_FIL_MSK; + /* From the register value, get the corresponding filter type */ + return ad7768_filter_regval_to_type[FIELD_GET(mask, mode)]; +} + +static const struct iio_enum ad7768_filter_type_iio_enum = { + .items = ad7768_filter_enum, + .num_items = ARRAY_SIZE(ad7768_filter_enum), + .set = ad7768_set_filter_type_attr, + .get = ad7768_get_filter_type_attr, +}; + +static const struct iio_chan_spec_ext_info ad7768_ext_info[] = { + IIO_ENUM("filter_type", IIO_SHARED_BY_ALL, &ad7768_filter_type_iio_enum), + IIO_ENUM_AVAILABLE("filter_type", IIO_SHARED_BY_ALL, &ad7768_filter_type_iio_enum), + { } +}; + +static const struct iio_chan_spec ad7768_channels[] = { + { + .type = IIO_VOLTAGE, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | + BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ), + .ext_info = ad7768_ext_info, + .indexed = 1, + .channel = 0, + .scan_index = 0, + .has_ext_scan_type = 1, + .ext_scan_type = ad7768_scan_type, + .num_ext_scan_type = ARRAY_SIZE(ad7768_scan_type), + }, +}; + +static int ad7768_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long info) +{ + struct ad7768_state *st = iio_priv(indio_dev); + const struct iio_scan_type *scan_type; + int ret, temp; + + scan_type = iio_get_current_scan_type(indio_dev, chan); + if (IS_ERR(scan_type)) + return PTR_ERR(scan_type); + + switch (info) { + case IIO_CHAN_INFO_RAW: + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = ad7768_scan_direct(indio_dev); + + iio_device_release_direct(indio_dev); + if (ret < 0) + return ret; + *val = sign_extend32(ret, scan_type->realbits - 1); + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_SCALE: + *val = (st->vref_uv * 2) / 1000; + *val2 = scan_type->realbits; + + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = st->samp_freq; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + *val = st->oversampling_ratio; + + return IIO_VAL_INT; + + case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY: + temp = st->samp_freq * ad7768_filter_3db_odr_multiplier[st->filter_type]; + *val = DIV_ROUND_CLOSEST(temp, MILLI); + + return IIO_VAL_INT; + } + + return -EINVAL; +} + +static int ad7768_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long info) +{ + struct ad7768_state *st = iio_priv(indio_dev); + unsigned int shift; + + switch (info) { + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + /* + * Sinc3 filter allows a wider range of OSR values, so show + * the available values in range format. + */ + if (st->filter_type == AD7768_FILTER_SINC3 || + st->filter_type == AD7768_FILTER_SINC3_REJ60) { + *vals = (int *)ad7768_sinc3_dec_rate_range; + *type = IIO_VAL_INT; + return IIO_AVAIL_RANGE; + } + + shift = st->filter_type == AD7768_FILTER_SINC5 ? 0 : 2; + *vals = (int *)&ad7768_dec_rate_values[shift]; + *length = ARRAY_SIZE(ad7768_dec_rate_values) - shift; + *type = IIO_VAL_INT; + return IIO_AVAIL_LIST; + case IIO_CHAN_INFO_SAMP_FREQ: + *vals = (int *)st->samp_freq_avail; + *length = st->samp_freq_avail_len; + *type = IIO_VAL_INT; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + +static int __ad7768_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long info) +{ + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + switch (info) { + case IIO_CHAN_INFO_SAMP_FREQ: + return ad7768_set_freq(st, val); + + case IIO_CHAN_INFO_OVERSAMPLING_RATIO: + ret = ad7768_configure_dig_fil(indio_dev, st->filter_type, val); + if (ret) + return ret; + + /* Update sampling frequency */ + return ad7768_set_freq(st, st->samp_freq); + default: + return -EINVAL; + } +} + +static int ad7768_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long info) +{ + int ret; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = __ad7768_write_raw(indio_dev, chan, val, val2, info); + iio_device_release_direct(indio_dev); + + return ret; +} + +static int ad7768_read_label(struct iio_dev *indio_dev, + const struct iio_chan_spec *chan, char *label) +{ + struct ad7768_state *st = iio_priv(indio_dev); + + return sysfs_emit(label, "%s\n", st->labels[chan->channel]); +} + +static int ad7768_get_current_scan_type(const struct iio_dev *indio_dev, + const struct iio_chan_spec *chan) +{ + struct ad7768_state *st = iio_priv(indio_dev); + + return st->oversampling_ratio == 8 ? + AD7768_SCAN_TYPE_HIGH_SPEED : AD7768_SCAN_TYPE_NORMAL; +} + +static const struct iio_info ad7768_info = { + .read_raw = &ad7768_read_raw, + .read_avail = &ad7768_read_avail, + .write_raw = &ad7768_write_raw, + .read_label = ad7768_read_label, + .get_current_scan_type = &ad7768_get_current_scan_type, + .debugfs_reg_access = &ad7768_reg_access, +}; + +static struct fwnode_handle * +ad7768_fwnode_find_reference_args(const struct fwnode_handle *fwnode, + const char *name, const char *nargs_prop, + unsigned int nargs, unsigned int index, + struct fwnode_reference_args *args) +{ + int ret; + + ret = fwnode_property_get_reference_args(fwnode, name, nargs_prop, + nargs, index, args); + return ret ? ERR_PTR(ret) : args->fwnode; +} + +static int ad7768_trigger_sources_sync_setup(struct device *dev, + struct fwnode_handle *fwnode, + struct ad7768_state *st) +{ + struct fwnode_reference_args args; + + struct fwnode_handle *ref __free(fwnode_handle) = + ad7768_fwnode_find_reference_args(fwnode, "trigger-sources", + "#trigger-source-cells", 0, + AD7768_TRIGGER_SOURCE_SYNC_IDX, + &args); + if (IS_ERR(ref)) + return PTR_ERR(ref); + + ref = args.fwnode; + /* First, try getting the GPIO trigger source */ + if (fwnode_device_is_compatible(ref, "gpio-trigger")) { + st->gpio_sync_in = devm_fwnode_gpiod_get_index(dev, ref, NULL, 0, + GPIOD_OUT_LOW, + "sync-in"); + return PTR_ERR_OR_ZERO(st->gpio_sync_in); + } + + /* + * TODO: Support the other cases when we have a trigger subsystem + * to reliably handle other types of devices as trigger sources. + * + * For now, return an error message. For self triggering, omit the + * trigger-sources property. + */ + return dev_err_probe(dev, -EOPNOTSUPP, "Invalid synchronization trigger source\n"); +} + +static int ad7768_trigger_sources_get_sync(struct device *dev, + struct ad7768_state *st) +{ + struct fwnode_handle *fwnode = dev_fwnode(dev); + + /* + * The AD7768-1 allows two primary methods for driving the SYNC_IN pin + * to synchronize one or more devices: + * 1. Using an external GPIO. + * 2. Using a SPI command, where the SYNC_OUT pin generates a + * synchronization pulse that drives the SYNC_IN pin. + */ + if (fwnode_property_present(fwnode, "trigger-sources")) + return ad7768_trigger_sources_sync_setup(dev, fwnode, st); + + /* + * In the absence of trigger-sources property, enable self + * synchronization over SPI (SYNC_OUT). + */ + st->en_spi_sync = true; + + return 0; +} + +static int ad7768_setup(struct iio_dev *indio_dev) +{ + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + st->gpio_reset = devm_gpiod_get_optional(&st->spi->dev, "reset", + GPIOD_OUT_HIGH); + if (IS_ERR(st->gpio_reset)) + return PTR_ERR(st->gpio_reset); + + if (st->gpio_reset) { + fsleep(10); + gpiod_set_value_cansleep(st->gpio_reset, 0); + fsleep(200); + } else { + /* + * Two writes to the SPI_RESET[1:0] bits are required to initiate + * a software reset. The bits must first be set to 11, and then + * to 10. When the sequence is detected, the reset occurs. + * See the datasheet, page 70. + */ + ret = regmap_write(st->regmap, AD7768_REG_SYNC_RESET, 0x3); + if (ret) + return ret; + + ret = regmap_write(st->regmap, AD7768_REG_SYNC_RESET, 0x2); + if (ret) + return ret; + } + + /* For backwards compatibility, try the adi,sync-in-gpios property */ + st->gpio_sync_in = devm_gpiod_get_optional(&st->spi->dev, "adi,sync-in", + GPIOD_OUT_LOW); + if (IS_ERR(st->gpio_sync_in)) + return PTR_ERR(st->gpio_sync_in); + + /* + * If the synchronization is not defined by adi,sync-in-gpios, try the + * trigger-sources. + */ + if (!st->gpio_sync_in) { + ret = ad7768_trigger_sources_get_sync(&st->spi->dev, st); + if (ret) + return ret; + } + + /* Only create a Chip GPIO if flagged for it */ + if (device_property_read_bool(&st->spi->dev, "gpio-controller")) { + ret = ad7768_gpio_init(indio_dev); + if (ret) + return ret; + } + + /* + * Set Default Digital Filter configuration: + * SINC5 filter with x32 Decimation rate + */ + ret = ad7768_configure_dig_fil(indio_dev, AD7768_FILTER_SINC5, 32); + if (ret) + return ret; + + /* Set the default sampling frequency to 32000 kSPS */ + return ad7768_set_freq(st, 32000); +} + +static irqreturn_t ad7768_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct ad7768_state *st = iio_priv(indio_dev); + const struct iio_scan_type *scan_type; + int ret; + + scan_type = iio_get_current_scan_type(indio_dev, &indio_dev->channels[0]); + if (IS_ERR(scan_type)) + goto out; + + ret = spi_read(st->spi, &st->data.scan.chan, + BITS_TO_BYTES(scan_type->realbits)); + if (ret < 0) + goto out; + + iio_push_to_buffers_with_ts(indio_dev, &st->data.scan, + sizeof(st->data.scan), + iio_get_time_ns(indio_dev)); + +out: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static irqreturn_t ad7768_interrupt(int irq, void *dev_id) +{ + struct iio_dev *indio_dev = dev_id; + struct ad7768_state *st = iio_priv(indio_dev); + + if (iio_buffer_enabled(indio_dev)) + iio_trigger_poll(st->trig); + else + complete(&st->completion); + + return IRQ_HANDLED; +}; + +static int ad7768_buffer_postenable(struct iio_dev *indio_dev) +{ + struct ad7768_state *st = iio_priv(indio_dev); + + /* + * Write a 1 to the LSB of the INTERFACE_FORMAT register to enter + * continuous read mode. Subsequent data reads do not require an + * initial 8-bit write to query the ADC_DATA register. + */ + return regmap_write(st->regmap, AD7768_REG_INTERFACE_FORMAT, 0x01); +} + +static int ad7768_buffer_predisable(struct iio_dev *indio_dev) +{ + struct ad7768_state *st = iio_priv(indio_dev); + unsigned int unused; + + /* + * To exit continuous read mode, perform a single read of the ADC_DATA + * reg (0x2C), which allows further configuration of the device. + */ + return regmap_read(st->regmap24, AD7768_REG24_ADC_DATA, &unused); +} + +static const struct iio_buffer_setup_ops ad7768_buffer_ops = { + .postenable = &ad7768_buffer_postenable, + .predisable = &ad7768_buffer_predisable, +}; + +static const struct iio_trigger_ops ad7768_trigger_ops = { + .validate_device = iio_trigger_validate_own_device, +}; + +static int ad7768_set_channel_label(struct iio_dev *indio_dev, + int num_channels) +{ + struct ad7768_state *st = iio_priv(indio_dev); + struct device *device = indio_dev->dev.parent; + const char *label; + int crt_ch = 0; + + device_for_each_child_node_scoped(device, child) { + if (fwnode_property_read_u32(child, "reg", &crt_ch)) + continue; + + if (crt_ch >= num_channels) + continue; + + if (fwnode_property_read_string(child, "label", &label)) + continue; + + st->labels[crt_ch] = label; + } + + return 0; +} + +static int ad7768_triggered_buffer_alloc(struct iio_dev *indio_dev) +{ + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + st->trig = devm_iio_trigger_alloc(indio_dev->dev.parent, "%s-dev%d", + indio_dev->name, + iio_device_id(indio_dev)); + if (!st->trig) + return -ENOMEM; + + st->trig->ops = &ad7768_trigger_ops; + iio_trigger_set_drvdata(st->trig, indio_dev); + ret = devm_iio_trigger_register(indio_dev->dev.parent, st->trig); + if (ret) + return ret; + + indio_dev->trig = iio_trigger_get(st->trig); + + return devm_iio_triggered_buffer_setup(indio_dev->dev.parent, indio_dev, + &iio_pollfunc_store_time, + &ad7768_trigger_handler, + &ad7768_buffer_ops); +} + +static int ad7768_vcm_enable(struct regulator_dev *rdev) +{ + struct iio_dev *indio_dev = rdev_get_drvdata(rdev); + struct ad7768_state *st = iio_priv(indio_dev); + int ret, regval; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + /* To enable, set the last selected output */ + regval = AD7768_REG_ANALOG2_VCM(st->vcm_output_sel + 1); + ret = regmap_update_bits(st->regmap, AD7768_REG_ANALOG2, + AD7768_REG_ANALOG2_VCM_MSK, regval); + iio_device_release_direct(indio_dev); + + return ret; +} + +static int ad7768_vcm_disable(struct regulator_dev *rdev) +{ + struct iio_dev *indio_dev = rdev_get_drvdata(rdev); + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = regmap_update_bits(st->regmap, AD7768_REG_ANALOG2, + AD7768_REG_ANALOG2_VCM_MSK, AD7768_VCM_OFF); + iio_device_release_direct(indio_dev); + + return ret; +} + +static int ad7768_vcm_is_enabled(struct regulator_dev *rdev) +{ + struct iio_dev *indio_dev = rdev_get_drvdata(rdev); + struct ad7768_state *st = iio_priv(indio_dev); + int ret, val; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = regmap_read(st->regmap, AD7768_REG_ANALOG2, &val); + iio_device_release_direct(indio_dev); + if (ret) + return ret; + + return FIELD_GET(AD7768_REG_ANALOG2_VCM_MSK, val) != AD7768_VCM_OFF; +} + +static int ad7768_set_voltage_sel(struct regulator_dev *rdev, + unsigned int selector) +{ + unsigned int regval = AD7768_REG_ANALOG2_VCM(selector + 1); + struct iio_dev *indio_dev = rdev_get_drvdata(rdev); + struct ad7768_state *st = iio_priv(indio_dev); + int ret; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = regmap_update_bits(st->regmap, AD7768_REG_ANALOG2, + AD7768_REG_ANALOG2_VCM_MSK, regval); + iio_device_release_direct(indio_dev); + if (ret) + return ret; + + st->vcm_output_sel = selector; + + return 0; +} + +static int ad7768_get_voltage_sel(struct regulator_dev *rdev) +{ + struct iio_dev *indio_dev = rdev_get_drvdata(rdev); + struct ad7768_state *st = iio_priv(indio_dev); + int ret, val; + + if (!iio_device_claim_direct(indio_dev)) + return -EBUSY; + + ret = regmap_read(st->regmap, AD7768_REG_ANALOG2, &val); + iio_device_release_direct(indio_dev); + if (ret) + return ret; + + val = FIELD_GET(AD7768_REG_ANALOG2_VCM_MSK, val); + + return clamp(val, 1, rdev->desc->n_voltages) - 1; +} + +static const struct regulator_ops vcm_regulator_ops = { + .enable = ad7768_vcm_enable, + .disable = ad7768_vcm_disable, + .is_enabled = ad7768_vcm_is_enabled, + .list_voltage = regulator_list_voltage_table, + .set_voltage_sel = ad7768_set_voltage_sel, + .get_voltage_sel = ad7768_get_voltage_sel, +}; + +static const unsigned int vcm_voltage_table[] = { + 2500000, + 2050000, + 1650000, + 1900000, + 1100000, + 900000, +}; + +static const struct regulator_desc vcm_desc = { + .name = "ad7768-1-vcm", + .of_match = "vcm-output", + .regulators_node = "regulators", + .n_voltages = ARRAY_SIZE(vcm_voltage_table), + .volt_table = vcm_voltage_table, + .ops = &vcm_regulator_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, +}; + +static int ad7768_register_regulators(struct device *dev, struct ad7768_state *st, + struct iio_dev *indio_dev) +{ + struct regulator_config config = { + .dev = dev, + .driver_data = indio_dev, + }; + int ret; + + /* Disable the regulator before registering it */ + ret = regmap_update_bits(st->regmap, AD7768_REG_ANALOG2, + AD7768_REG_ANALOG2_VCM_MSK, AD7768_VCM_OFF); + if (ret) + return ret; + + st->vcm_rdev = devm_regulator_register(dev, &vcm_desc, &config); + if (IS_ERR(st->vcm_rdev)) + return dev_err_probe(dev, PTR_ERR(st->vcm_rdev), + "failed to register VCM regulator\n"); + + return 0; +} + +static int ad7768_probe(struct spi_device *spi) +{ + struct ad7768_state *st; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + st = iio_priv(indio_dev); + /* + * Datasheet recommends SDI line to be kept high when data is not being + * clocked out of the controller and the spi clock is free running, + * to prevent accidental reset. + * Since many controllers do not support the SPI_MOSI_IDLE_HIGH flag + * yet, only request the MOSI idle state to enable if the controller + * supports it. + */ + if (spi->controller->mode_bits & SPI_MOSI_IDLE_HIGH) { + spi->mode |= SPI_MOSI_IDLE_HIGH; + ret = spi_setup(spi); + if (ret < 0) + return ret; + } + + st->spi = spi; + + st->regmap = devm_regmap_init_spi(spi, &ad7768_regmap_config); + if (IS_ERR(st->regmap)) + return dev_err_probe(&spi->dev, PTR_ERR(st->regmap), + "Failed to initialize regmap"); + + st->regmap24 = devm_regmap_init_spi(spi, &ad7768_regmap24_config); + if (IS_ERR(st->regmap24)) + return dev_err_probe(&spi->dev, PTR_ERR(st->regmap24), + "Failed to initialize regmap24"); + + ret = devm_regulator_get_enable_read_voltage(&spi->dev, "vref"); + if (ret < 0) + return dev_err_probe(&spi->dev, ret, + "Failed to get VREF voltage\n"); + st->vref_uv = ret; + + st->mclk = devm_clk_get_enabled(&spi->dev, "mclk"); + if (IS_ERR(st->mclk)) + return PTR_ERR(st->mclk); + + st->mclk_freq = clk_get_rate(st->mclk); + + indio_dev->channels = ad7768_channels; + indio_dev->num_channels = ARRAY_SIZE(ad7768_channels); + indio_dev->name = spi_get_device_id(spi)->name; + indio_dev->info = &ad7768_info; + indio_dev->modes = INDIO_DIRECT_MODE; + + /* Register VCM output regulator */ + ret = ad7768_register_regulators(&spi->dev, st, indio_dev); + if (ret) + return ret; + + ret = ad7768_setup(indio_dev); + if (ret < 0) { + dev_err(&spi->dev, "AD7768 setup failed\n"); + return ret; + } + + init_completion(&st->completion); + + ret = ad7768_set_channel_label(indio_dev, ARRAY_SIZE(ad7768_channels)); + if (ret) + return ret; + + ret = devm_request_irq(&spi->dev, spi->irq, + &ad7768_interrupt, + IRQF_TRIGGER_RISING | IRQF_ONESHOT, + indio_dev->name, indio_dev); + if (ret) + return ret; + + ret = ad7768_triggered_buffer_alloc(indio_dev); + if (ret) + return ret; + + return devm_iio_device_register(&spi->dev, indio_dev); +} + +static const struct spi_device_id ad7768_id_table[] = { + { "ad7768-1", 0 }, + { } +}; +MODULE_DEVICE_TABLE(spi, ad7768_id_table); + +static const struct of_device_id ad7768_of_match[] = { + { .compatible = "adi,ad7768-1" }, + { } +}; +MODULE_DEVICE_TABLE(of, ad7768_of_match); + +static struct spi_driver ad7768_driver = { + .driver = { + .name = "ad7768-1", + .of_match_table = ad7768_of_match, + }, + .probe = ad7768_probe, + .id_table = ad7768_id_table, +}; +module_spi_driver(ad7768_driver); + +MODULE_AUTHOR("Stefan Popa <stefan.popa@analog.com>"); +MODULE_DESCRIPTION("Analog Devices AD7768-1 ADC driver"); +MODULE_LICENSE("GPL v2"); |