1 files changed, 0 insertions, 108 deletions
diff --git a/drivers/iio/adc/qcom-vadc-common.h b/drivers/iio/adc/qcom-vadc-common.h
deleted file mode 100644
index 63c872a70adc..000000000000
--- a/drivers/iio/adc/qcom-vadc-common.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * Code shared between the different Qualcomm PMIC voltage ADCs
- */
-
-#ifndef QCOM_VADC_COMMON_H
-#define QCOM_VADC_COMMON_H
-
-#define VADC_CONV_TIME_MIN_US			2000
-#define VADC_CONV_TIME_MAX_US			2100
-
-/* Min ADC code represents 0V */
-#define VADC_MIN_ADC_CODE			0x6000
-/* Max ADC code represents full-scale range of 1.8V */
-#define VADC_MAX_ADC_CODE			0xa800
-
-#define VADC_ABSOLUTE_RANGE_UV			625000
-#define VADC_RATIOMETRIC_RANGE			1800
-
-#define VADC_DEF_PRESCALING			0 /* 1:1 */
-#define VADC_DEF_DECIMATION			0 /* 512 */
-#define VADC_DEF_HW_SETTLE_TIME			0 /* 0 us */
-#define VADC_DEF_AVG_SAMPLES			0 /* 1 sample */
-#define VADC_DEF_CALIB_TYPE			VADC_CALIB_ABSOLUTE
-
-#define VADC_DECIMATION_MIN			512
-#define VADC_DECIMATION_MAX			4096
-
-#define VADC_HW_SETTLE_DELAY_MAX		10000
-#define VADC_AVG_SAMPLES_MAX			512
-
-#define KELVINMIL_CELSIUSMIL			273150
-
-#define PMI_CHG_SCALE_1				-138890
-#define PMI_CHG_SCALE_2				391750000000LL
-
-/**
- * struct vadc_map_pt - Map the graph representation for ADC channel
- * @x: Represent the ADC digitized code.
- * @y: Represent the physical data which can be temperature, voltage,
- *     resistance.
- */
-struct vadc_map_pt {
-	s32 x;
-	s32 y;
-};
-
-/*
- * VADC_CALIB_ABSOLUTE: uses the 625mV and 1.25V as reference channels.
- * VADC_CALIB_RATIOMETRIC: uses the reference voltage (1.8V) and GND for
- * calibration.
- */
-enum vadc_calibration {
-	VADC_CALIB_ABSOLUTE = 0,
-	VADC_CALIB_RATIOMETRIC
-};
-
-/**
- * struct vadc_linear_graph - Represent ADC characteristics.
- * @dy: numerator slope to calculate the gain.
- * @dx: denominator slope to calculate the gain.
- * @gnd: A/D word of the ground reference used for the channel.
- *
- * Each ADC device has different offset and gain parameters which are
- * computed to calibrate the device.
- */
-struct vadc_linear_graph {
-	s32 dy;
-	s32 dx;
-	s32 gnd;
-};
-
-/**
- * struct vadc_prescale_ratio - Represent scaling ratio for ADC input.
- * @num: the inverse numerator of the gain applied to the input channel.
- * @den: the inverse denominator of the gain applied to the input channel.
- */
-struct vadc_prescale_ratio {
-	u32 num;
-	u32 den;
-};
-
-/**
- * enum vadc_scale_fn_type - Scaling function to convert ADC code to
- *				physical scaled units for the channel.
- * SCALE_DEFAULT: Default scaling to convert raw adc code to voltage (uV).
- * SCALE_THERM_100K_PULLUP: Returns temperature in millidegC.
- *				 Uses a mapping table with 100K pullup.
- * SCALE_PMIC_THERM: Returns result in milli degree's Centigrade.
- * SCALE_XOTHERM: Returns XO thermistor voltage in millidegC.
- * SCALE_PMI_CHG_TEMP: Conversion for PMI CHG temp
- */
-enum vadc_scale_fn_type {
-	SCALE_DEFAULT = 0,
-	SCALE_THERM_100K_PULLUP,
-	SCALE_PMIC_THERM,
-	SCALE_XOTHERM,
-	SCALE_PMI_CHG_TEMP,
-};
-
-int qcom_vadc_scale(enum vadc_scale_fn_type scaletype,
-		    const struct vadc_linear_graph *calib_graph,
-		    const struct vadc_prescale_ratio *prescale,
-		    bool absolute,
-		    u16 adc_code, int *result_mdec);
-
-int qcom_vadc_decimation_from_dt(u32 value);
-
-#endif /* QCOM_VADC_COMMON_H */