summaryrefslogtreecommitdiff
path: root/drivers/iio/imu/bmi160/bmi160_core.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/iio/imu/bmi160/bmi160_core.c')
-rw-r--r--drivers/iio/imu/bmi160/bmi160_core.c433
1 files changed, 373 insertions, 60 deletions
diff --git a/drivers/iio/imu/bmi160/bmi160_core.c b/drivers/iio/imu/bmi160/bmi160_core.c
index b10330b0f93f..5f47708b4c5d 100644
--- a/drivers/iio/imu/bmi160/bmi160_core.c
+++ b/drivers/iio/imu/bmi160/bmi160_core.c
@@ -1,30 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
/*
* BMI160 - Bosch IMU (accel, gyro plus external magnetometer)
*
* Copyright (c) 2016, Intel Corporation.
- *
- * This file is subject to the terms and conditions of version 2 of
- * the GNU General Public License. See the file COPYING in the main
- * directory of this archive for more details.
+ * Copyright (c) 2019, Martin Kelly.
*
* IIO core driver for BMI160, with support for I2C/SPI busses
*
- * TODO: magnetometer, interrupts, hardware FIFO
+ * TODO: magnetometer, hardware FIFO
*/
#include <linux/module.h>
#include <linux/regmap.h>
-#include <linux/acpi.h>
#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/property.h>
+#include <linux/regulator/consumer.h>
#include <linux/iio/iio.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/iio/buffer.h>
#include <linux/iio/sysfs.h>
+#include <linux/iio/trigger.h>
#include "bmi160.h"
#define BMI160_REG_CHIP_ID 0x00
+#define BMI120_CHIP_ID_VAL 0xD3
#define BMI160_CHIP_ID_VAL 0xD1
#define BMI160_REG_PMU_STATUS 0x03
@@ -64,8 +66,32 @@
#define BMI160_CMD_GYRO_PM_FAST_STARTUP 0x17
#define BMI160_CMD_SOFTRESET 0xB6
+#define BMI160_REG_INT_EN 0x51
+#define BMI160_DRDY_INT_EN BIT(4)
+
+#define BMI160_REG_INT_OUT_CTRL 0x53
+#define BMI160_INT_OUT_CTRL_MASK 0x0f
+#define BMI160_INT1_OUT_CTRL_SHIFT 0
+#define BMI160_INT2_OUT_CTRL_SHIFT 4
+#define BMI160_EDGE_TRIGGERED BIT(0)
+#define BMI160_ACTIVE_HIGH BIT(1)
+#define BMI160_OPEN_DRAIN BIT(2)
+#define BMI160_OUTPUT_EN BIT(3)
+
+#define BMI160_REG_INT_LATCH 0x54
+#define BMI160_INT1_LATCH_MASK BIT(4)
+#define BMI160_INT2_LATCH_MASK BIT(5)
+
+/* INT1 and INT2 are in the opposite order as in INT_OUT_CTRL! */
+#define BMI160_REG_INT_MAP 0x56
+#define BMI160_INT1_MAP_DRDY_EN 0x80
+#define BMI160_INT2_MAP_DRDY_EN 0x08
+
#define BMI160_REG_DUMMY 0x7F
+#define BMI160_NORMAL_WRITE_USLEEP 2
+#define BMI160_SUSPENDED_WRITE_USLEEP 450
+
#define BMI160_ACCEL_PMU_MIN_USLEEP 3800
#define BMI160_GYRO_PMU_MIN_USLEEP 80000
#define BMI160_SOFTRESET_USLEEP 1000
@@ -84,8 +110,14 @@
.storagebits = 16, \
.endianness = IIO_LE, \
}, \
+ .ext_info = bmi160_ext_info, \
}
+static const u8 bmi_chip_ids[] = {
+ BMI120_CHIP_ID_VAL,
+ BMI160_CHIP_ID_VAL,
+};
+
/* scan indexes follow DATA register order */
enum bmi160_scan_axis {
BMI160_SCAN_EXT_MAGN_X = 0,
@@ -108,15 +140,16 @@ enum bmi160_sensor_type {
BMI160_NUM_SENSORS /* must be last */
};
-struct bmi160_data {
- struct regmap *regmap;
+enum bmi160_int_pin {
+ BMI160_PIN_INT1,
+ BMI160_PIN_INT2
};
const struct regmap_config bmi160_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
};
-EXPORT_SYMBOL(bmi160_regmap_config);
+EXPORT_SYMBOL_NS(bmi160_regmap_config, "IIO_BMI160");
struct bmi160_regs {
u8 data; /* LSB byte register for X-axis */
@@ -128,7 +161,7 @@ struct bmi160_regs {
u8 pmu_cmd_suspend;
};
-static struct bmi160_regs bmi160_regs[] = {
+static const struct bmi160_regs bmi160_regs[] = {
[BMI160_ACCEL] = {
.data = BMI160_REG_DATA_ACCEL_XOUT_L,
.config = BMI160_REG_ACCEL_CONFIG,
@@ -238,6 +271,20 @@ static const struct bmi160_odr_item bmi160_odr_table[] = {
},
};
+static const struct iio_mount_matrix *
+bmi160_get_mount_matrix(const struct iio_dev *indio_dev,
+ const struct iio_chan_spec *chan)
+{
+ struct bmi160_data *data = iio_priv(indio_dev);
+
+ return &data->orientation;
+}
+
+static const struct iio_chan_spec_ext_info bmi160_ext_info[] = {
+ IIO_MOUNT_MATRIX(IIO_SHARED_BY_DIR, bmi160_get_mount_matrix),
+ { }
+};
+
static const struct iio_chan_spec bmi160_channels[] = {
BMI160_CHANNEL(IIO_ACCEL, X, BMI160_SCAN_ACCEL_X),
BMI160_CHANNEL(IIO_ACCEL, Y, BMI160_SCAN_ACCEL_Y),
@@ -273,7 +320,7 @@ int bmi160_set_mode(struct bmi160_data *data, enum bmi160_sensor_type t,
cmd = bmi160_regs[t].pmu_cmd_suspend;
ret = regmap_write(data->regmap, BMI160_REG_CMD, cmd);
- if (ret < 0)
+ if (ret)
return ret;
usleep_range(bmi160_pmu_time[t], bmi160_pmu_time[t] + 1000);
@@ -305,7 +352,7 @@ int bmi160_get_scale(struct bmi160_data *data, enum bmi160_sensor_type t,
int i, ret, val;
ret = regmap_read(data->regmap, bmi160_regs[t].range, &val);
- if (ret < 0)
+ if (ret)
return ret;
for (i = 0; i < bmi160_scale_table[t].num; i++)
@@ -328,7 +375,7 @@ static int bmi160_get_data(struct bmi160_data *data, int chan_type,
reg = bmi160_regs[t].data + (axis - IIO_MOD_X) * sizeof(sample);
ret = regmap_bulk_read(data->regmap, reg, &sample, sizeof(sample));
- if (ret < 0)
+ if (ret)
return ret;
*val = sign_extend32(le16_to_cpu(sample), 15);
@@ -362,7 +409,7 @@ static int bmi160_get_odr(struct bmi160_data *data, enum bmi160_sensor_type t,
int i, val, ret;
ret = regmap_read(data->regmap, bmi160_regs[t].config, &val);
- if (ret < 0)
+ if (ret)
return ret;
val &= bmi160_regs[t].config_odr_mask;
@@ -385,22 +432,18 @@ static irqreturn_t bmi160_trigger_handler(int irq, void *p)
struct iio_poll_func *pf = p;
struct iio_dev *indio_dev = pf->indio_dev;
struct bmi160_data *data = iio_priv(indio_dev);
- __le16 buf[16];
- /* 3 sens x 3 axis x __le16 + 3 x __le16 pad + 4 x __le16 tstamp */
int i, ret, j = 0, base = BMI160_REG_DATA_MAGN_XOUT_L;
__le16 sample;
- for_each_set_bit(i, indio_dev->active_scan_mask,
- indio_dev->masklength) {
+ iio_for_each_active_channel(indio_dev, i) {
ret = regmap_bulk_read(data->regmap, base + i * sizeof(sample),
&sample, sizeof(sample));
- if (ret < 0)
+ if (ret)
goto done;
- buf[j++] = sample;
+ data->buf[j++] = sample;
}
- iio_push_to_buffers_with_timestamp(indio_dev, buf,
- iio_get_time_ns(indio_dev));
+ iio_push_to_buffers_with_timestamp(indio_dev, data->buf, pf->timestamp);
done:
iio_trigger_notify_done(indio_dev->trig);
return IRQ_HANDLED;
@@ -416,18 +459,18 @@ static int bmi160_read_raw(struct iio_dev *indio_dev,
switch (mask) {
case IIO_CHAN_INFO_RAW:
ret = bmi160_get_data(data, chan->type, chan->channel2, val);
- if (ret < 0)
+ if (ret)
return ret;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = 0;
ret = bmi160_get_scale(data,
bmi160_to_sensor(chan->type), val2);
- return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO;
+ return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
case IIO_CHAN_INFO_SAMP_FREQ:
ret = bmi160_get_odr(data, bmi160_to_sensor(chan->type),
val, val2);
- return ret < 0 ? ret : IIO_VAL_INT_PLUS_MICRO;
+ return ret ? ret : IIO_VAL_INT_PLUS_MICRO;
default:
return -EINVAL;
}
@@ -445,7 +488,6 @@ static int bmi160_write_raw(struct iio_dev *indio_dev,
case IIO_CHAN_INFO_SCALE:
return bmi160_set_scale(data,
bmi160_to_sensor(chan->type), val2);
- break;
case IIO_CHAN_INFO_SAMP_FREQ:
return bmi160_set_odr(data, bmi160_to_sensor(chan->type),
val, val2);
@@ -487,15 +529,185 @@ static const struct iio_info bmi160_info = {
.attrs = &bmi160_attrs_group,
};
-static const char *bmi160_match_acpi_device(struct device *dev)
+static int bmi160_write_conf_reg(struct regmap *regmap, unsigned int reg,
+ unsigned int mask, unsigned int bits,
+ unsigned int write_usleep)
+{
+ int ret;
+ unsigned int val;
+
+ ret = regmap_read(regmap, reg, &val);
+ if (ret)
+ return ret;
+
+ val = (val & ~mask) | bits;
+
+ ret = regmap_write(regmap, reg, val);
+ if (ret)
+ return ret;
+
+ /*
+ * We need to wait after writing before we can write again. See the
+ * datasheet, page 93.
+ */
+ usleep_range(write_usleep, write_usleep + 1000);
+
+ return 0;
+}
+
+static int bmi160_config_pin(struct regmap *regmap, enum bmi160_int_pin pin,
+ bool open_drain, u8 irq_mask,
+ unsigned long write_usleep)
+{
+ int ret;
+ struct device *dev = regmap_get_device(regmap);
+ u8 int_out_ctrl_shift;
+ u8 int_latch_mask;
+ u8 int_map_mask;
+ u8 int_out_ctrl_mask;
+ u8 int_out_ctrl_bits;
+ const char *pin_name;
+
+ switch (pin) {
+ case BMI160_PIN_INT1:
+ int_out_ctrl_shift = BMI160_INT1_OUT_CTRL_SHIFT;
+ int_latch_mask = BMI160_INT1_LATCH_MASK;
+ int_map_mask = BMI160_INT1_MAP_DRDY_EN;
+ break;
+ case BMI160_PIN_INT2:
+ int_out_ctrl_shift = BMI160_INT2_OUT_CTRL_SHIFT;
+ int_latch_mask = BMI160_INT2_LATCH_MASK;
+ int_map_mask = BMI160_INT2_MAP_DRDY_EN;
+ break;
+ }
+ int_out_ctrl_mask = BMI160_INT_OUT_CTRL_MASK << int_out_ctrl_shift;
+
+ /*
+ * Enable the requested pin with the right settings:
+ * - Push-pull/open-drain
+ * - Active low/high
+ * - Edge/level triggered
+ */
+ int_out_ctrl_bits = BMI160_OUTPUT_EN;
+ if (open_drain)
+ /* Default is push-pull. */
+ int_out_ctrl_bits |= BMI160_OPEN_DRAIN;
+ int_out_ctrl_bits |= irq_mask;
+ int_out_ctrl_bits <<= int_out_ctrl_shift;
+
+ ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_OUT_CTRL,
+ int_out_ctrl_mask, int_out_ctrl_bits,
+ write_usleep);
+ if (ret)
+ return ret;
+
+ /* Set the pin to input mode with no latching. */
+ ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_LATCH,
+ int_latch_mask, int_latch_mask,
+ write_usleep);
+ if (ret)
+ return ret;
+
+ /* Map interrupts to the requested pin. */
+ ret = bmi160_write_conf_reg(regmap, BMI160_REG_INT_MAP,
+ int_map_mask, int_map_mask,
+ write_usleep);
+ if (ret) {
+ switch (pin) {
+ case BMI160_PIN_INT1:
+ pin_name = "INT1";
+ break;
+ case BMI160_PIN_INT2:
+ pin_name = "INT2";
+ break;
+ }
+ dev_err(dev, "Failed to configure %s IRQ pin", pin_name);
+ }
+
+ return ret;
+}
+
+int bmi160_enable_irq(struct regmap *regmap, bool enable)
+{
+ unsigned int enable_bit = 0;
+
+ if (enable)
+ enable_bit = BMI160_DRDY_INT_EN;
+
+ return bmi160_write_conf_reg(regmap, BMI160_REG_INT_EN,
+ BMI160_DRDY_INT_EN, enable_bit,
+ BMI160_NORMAL_WRITE_USLEEP);
+}
+EXPORT_SYMBOL_NS(bmi160_enable_irq, "IIO_BMI160");
+
+static int bmi160_get_irq(struct fwnode_handle *fwnode, enum bmi160_int_pin *pin)
+{
+ int irq;
+
+ /* Use INT1 if possible, otherwise fall back to INT2. */
+ irq = fwnode_irq_get_byname(fwnode, "INT1");
+ if (irq > 0) {
+ *pin = BMI160_PIN_INT1;
+ return irq;
+ }
+
+ irq = fwnode_irq_get_byname(fwnode, "INT2");
+ if (irq > 0)
+ *pin = BMI160_PIN_INT2;
+
+ return irq;
+}
+
+static int bmi160_config_device_irq(struct iio_dev *indio_dev, int irq_type,
+ enum bmi160_int_pin pin)
+{
+ bool open_drain;
+ u8 irq_mask;
+ struct bmi160_data *data = iio_priv(indio_dev);
+ struct device *dev = regmap_get_device(data->regmap);
+
+ /* Level-triggered, active-low is the default if we set all zeroes. */
+ if (irq_type == IRQF_TRIGGER_RISING)
+ irq_mask = BMI160_ACTIVE_HIGH | BMI160_EDGE_TRIGGERED;
+ else if (irq_type == IRQF_TRIGGER_FALLING)
+ irq_mask = BMI160_EDGE_TRIGGERED;
+ else if (irq_type == IRQF_TRIGGER_HIGH)
+ irq_mask = BMI160_ACTIVE_HIGH;
+ else if (irq_type == IRQF_TRIGGER_LOW)
+ irq_mask = 0;
+ else {
+ dev_err(&indio_dev->dev,
+ "Invalid interrupt type 0x%x specified\n", irq_type);
+ return -EINVAL;
+ }
+
+ open_drain = device_property_read_bool(dev, "drive-open-drain");
+
+ return bmi160_config_pin(data->regmap, pin, open_drain, irq_mask,
+ BMI160_NORMAL_WRITE_USLEEP);
+}
+
+static int bmi160_setup_irq(struct iio_dev *indio_dev, int irq,
+ enum bmi160_int_pin pin)
{
- const struct acpi_device_id *id;
+ u32 irq_type = irq_get_trigger_type(irq);
+ int ret;
- id = acpi_match_device(dev->driver->acpi_match_table, dev);
- if (!id)
- return NULL;
+ ret = bmi160_config_device_irq(indio_dev, irq_type, pin);
+ if (ret)
+ return ret;
- return dev_name(dev);
+ return bmi160_probe_trigger(indio_dev, irq, irq_type);
+}
+
+static int bmi160_check_chip_id(const u8 chip_id)
+{
+ for (int i = 0; i < ARRAY_SIZE(bmi_chip_ids); i++) {
+ if (chip_id == bmi_chip_ids[i])
+ return 0;
+ }
+
+ return -ENODEV;
}
static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
@@ -504,9 +716,15 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
unsigned int val;
struct device *dev = regmap_get_device(data->regmap);
- ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET);
- if (ret < 0)
+ ret = regulator_bulk_enable(ARRAY_SIZE(data->supplies), data->supplies);
+ if (ret) {
+ dev_err(dev, "Failed to enable regulators: %d\n", ret);
return ret;
+ }
+
+ ret = regmap_write(data->regmap, BMI160_REG_CMD, BMI160_CMD_SOFTRESET);
+ if (ret)
+ goto disable_regulator;
usleep_range(BMI160_SOFTRESET_USLEEP, BMI160_SOFTRESET_USLEEP + 1);
@@ -516,38 +734,95 @@ static int bmi160_chip_init(struct bmi160_data *data, bool use_spi)
*/
if (use_spi) {
ret = regmap_read(data->regmap, BMI160_REG_DUMMY, &val);
- if (ret < 0)
- return ret;
+ if (ret)
+ goto disable_regulator;
}
ret = regmap_read(data->regmap, BMI160_REG_CHIP_ID, &val);
- if (ret < 0) {
+ if (ret) {
dev_err(dev, "Error reading chip id\n");
- return ret;
- }
- if (val != BMI160_CHIP_ID_VAL) {
- dev_err(dev, "Wrong chip id, got %x expected %x\n",
- val, BMI160_CHIP_ID_VAL);
- return -ENODEV;
+ goto disable_regulator;
}
+ ret = bmi160_check_chip_id(val);
+ if (ret)
+ dev_warn(dev, "Chip id not found: %x\n", val);
+
ret = bmi160_set_mode(data, BMI160_ACCEL, true);
- if (ret < 0)
- return ret;
+ if (ret)
+ goto disable_regulator;
ret = bmi160_set_mode(data, BMI160_GYRO, true);
- if (ret < 0)
+ if (ret)
+ goto disable_accel;
+
+ return 0;
+
+disable_accel:
+ bmi160_set_mode(data, BMI160_ACCEL, false);
+
+disable_regulator:
+ regulator_bulk_disable(ARRAY_SIZE(data->supplies), data->supplies);
+ return ret;
+}
+
+static int bmi160_data_rdy_trigger_set_state(struct iio_trigger *trig,
+ bool enable)
+{
+ struct iio_dev *indio_dev = iio_trigger_get_drvdata(trig);
+ struct bmi160_data *data = iio_priv(indio_dev);
+
+ return bmi160_enable_irq(data->regmap, enable);
+}
+
+static const struct iio_trigger_ops bmi160_trigger_ops = {
+ .set_trigger_state = &bmi160_data_rdy_trigger_set_state,
+};
+
+int bmi160_probe_trigger(struct iio_dev *indio_dev, int irq, u32 irq_type)
+{
+ struct bmi160_data *data = iio_priv(indio_dev);
+ int ret;
+
+ data->trig = devm_iio_trigger_alloc(&indio_dev->dev, "%s-dev%d",
+ indio_dev->name,
+ iio_device_id(indio_dev));
+
+ if (data->trig == NULL)
+ return -ENOMEM;
+
+ ret = devm_request_irq(&indio_dev->dev, irq,
+ &iio_trigger_generic_data_rdy_poll,
+ irq_type, "bmi160", data->trig);
+ if (ret)
return ret;
+ data->trig->dev.parent = regmap_get_device(data->regmap);
+ data->trig->ops = &bmi160_trigger_ops;
+ iio_trigger_set_drvdata(data->trig, indio_dev);
+
+ ret = devm_iio_trigger_register(&indio_dev->dev, data->trig);
+ if (ret)
+ return ret;
+
+ indio_dev->trig = iio_trigger_get(data->trig);
+
return 0;
}
static void bmi160_chip_uninit(void *data)
{
struct bmi160_data *bmi_data = data;
+ struct device *dev = regmap_get_device(bmi_data->regmap);
+ int ret;
bmi160_set_mode(bmi_data, BMI160_GYRO, false);
bmi160_set_mode(bmi_data, BMI160_ACCEL, false);
+
+ ret = regulator_bulk_disable(ARRAY_SIZE(bmi_data->supplies),
+ bmi_data->supplies);
+ if (ret)
+ dev_err(dev, "Failed to disable regulators: %d\n", ret);
}
int bmi160_core_probe(struct device *dev, struct regmap *regmap,
@@ -555,6 +830,8 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap,
{
struct iio_dev *indio_dev;
struct bmi160_data *data;
+ int irq;
+ enum bmi160_int_pin int_pin;
int ret;
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
@@ -565,37 +842,73 @@ int bmi160_core_probe(struct device *dev, struct regmap *regmap,
dev_set_drvdata(dev, indio_dev);
data->regmap = regmap;
+ data->supplies[0].supply = "vdd";
+ data->supplies[1].supply = "vddio";
+ ret = devm_regulator_bulk_get(dev,
+ ARRAY_SIZE(data->supplies),
+ data->supplies);
+ if (ret) {
+ dev_err(dev, "Failed to get regulators: %d\n", ret);
+ return ret;
+ }
+
+ ret = iio_read_mount_matrix(dev, &data->orientation);
+ if (ret)
+ return ret;
+
ret = bmi160_chip_init(data, use_spi);
- if (ret < 0)
+ if (ret)
return ret;
ret = devm_add_action_or_reset(dev, bmi160_chip_uninit, data);
- if (ret < 0)
+ if (ret)
return ret;
- if (!name && ACPI_HANDLE(dev))
- name = bmi160_match_acpi_device(dev);
-
- indio_dev->dev.parent = dev;
indio_dev->channels = bmi160_channels;
indio_dev->num_channels = ARRAY_SIZE(bmi160_channels);
indio_dev->name = name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->info = &bmi160_info;
- ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+ ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+ iio_pollfunc_store_time,
bmi160_trigger_handler, NULL);
- if (ret < 0)
+ if (ret)
return ret;
- ret = devm_iio_device_register(dev, indio_dev);
- if (ret < 0)
- return ret;
+ irq = bmi160_get_irq(dev_fwnode(dev), &int_pin);
+ if (irq > 0) {
+ ret = bmi160_setup_irq(indio_dev, irq, int_pin);
+ if (ret)
+ dev_err(&indio_dev->dev, "Failed to setup IRQ %d\n",
+ irq);
+ } else {
+ dev_info(&indio_dev->dev, "Not setting up IRQ trigger\n");
+ }
- return 0;
+ return devm_iio_device_register(dev, indio_dev);
+}
+EXPORT_SYMBOL_NS_GPL(bmi160_core_probe, "IIO_BMI160");
+
+static int bmi160_core_runtime_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+
+ return iio_device_suspend_triggering(indio_dev);
+}
+
+static int bmi160_core_runtime_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+
+ return iio_device_resume_triggering(indio_dev);
}
-EXPORT_SYMBOL_GPL(bmi160_core_probe);
-MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com");
+const struct dev_pm_ops bmi160_core_pm_ops = {
+ RUNTIME_PM_OPS(bmi160_core_runtime_suspend, bmi160_core_runtime_resume, NULL)
+};
+EXPORT_SYMBOL_NS_GPL(bmi160_core_pm_ops, "IIO_BMI160");
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com>");
MODULE_DESCRIPTION("Bosch BMI160 driver");
MODULE_LICENSE("GPL v2");
generated by cgit (git 2.34.1) at 2025-12-26 01:45:33 +0000