diff options
Diffstat (limited to 'drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h')
| -rw-r--r-- | drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h | 98 |
1 files changed, 81 insertions, 17 deletions
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index cd38b3fccc7b..211901f8b8eb 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -9,15 +9,17 @@ #include <linux/i2c.h> #include <linux/i2c-mux.h> #include <linux/mutex.h> -#include <linux/iio/iio.h> -#include <linux/iio/buffer.h> +#include <linux/platform_data/invensense_mpu6050.h> #include <linux/regmap.h> -#include <linux/iio/sysfs.h> + +#include <linux/iio/buffer.h> +#include <linux/iio/common/inv_sensors_timestamp.h> +#include <linux/iio/iio.h> #include <linux/iio/kfifo_buf.h> #include <linux/iio/trigger.h> #include <linux/iio/triggered_buffer.h> #include <linux/iio/trigger_consumer.h> -#include <linux/platform_data/invensense_mpu6050.h> +#include <linux/iio/sysfs.h> /** * struct inv_mpu6050_reg_map - Notable registers. @@ -70,24 +72,31 @@ enum inv_devices { INV_MPU6050, INV_MPU6500, INV_MPU6515, + INV_MPU6880, INV_MPU6000, INV_MPU9150, INV_MPU9250, INV_MPU9255, INV_ICM20608, + INV_ICM20608D, INV_ICM20609, INV_ICM20689, + INV_ICM20600, INV_ICM20602, INV_ICM20690, + INV_IAM20380, INV_IAM20680, + INV_IAM20680HP, + INV_IAM20680HT, INV_NUM_PARTS }; -/* chip sensors mask: accelerometer, gyroscope, temperature, magnetometer */ +/* chip sensors mask: accelerometer, gyroscope, temperature, magnetometer, WoM */ #define INV_MPU6050_SENSOR_ACCL BIT(0) #define INV_MPU6050_SENSOR_GYRO BIT(1) #define INV_MPU6050_SENSOR_TEMP BIT(2) #define INV_MPU6050_SENSOR_MAGN BIT(3) +#define INV_MPU6050_SENSOR_WOM BIT(4) /** * struct inv_mpu6050_chip_config - Cached chip configuration data. @@ -99,11 +108,13 @@ enum inv_devices { * @gyro_en: gyro engine enabled * @temp_en: temperature sensor enabled * @magn_en: magn engine (i2c master) enabled + * @wom_en: Wake-on-Motion enabled * @accl_fifo_enable: enable accel data output * @gyro_fifo_enable: enable gyro data output * @temp_fifo_enable: enable temp data output * @magn_fifo_enable: enable magn data output * @divider: chip sample rate divider (sample rate divider - 1) + * @roc_threshold: save ROC threshold (WoM) set value */ struct inv_mpu6050_chip_config { unsigned int clk:3; @@ -114,14 +125,23 @@ struct inv_mpu6050_chip_config { unsigned int gyro_en:1; unsigned int temp_en:1; unsigned int magn_en:1; + unsigned int wom_en:1; unsigned int accl_fifo_enable:1; unsigned int gyro_fifo_enable:1; unsigned int temp_fifo_enable:1; unsigned int magn_fifo_enable:1; u8 divider; u8 user_ctrl; + u64 roc_threshold; }; +/* + * Maximum of 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8. + * May be less if fewer channels are enabled, as long as the timestamp + * remains 8 byte aligned + */ +#define INV_MPU6050_OUTPUT_DATA_SIZE 32 + /** * struct inv_mpu6050_hw - Other important hardware information. * @whoami: Self identification byte from WHO_AM_I register @@ -141,6 +161,10 @@ struct inv_mpu6050_hw { int offset; int scale; } temp; + struct { + unsigned int accel; + unsigned int gyro; + } startup_time; }; /* @@ -156,15 +180,15 @@ struct inv_mpu6050_hw { * @map regmap pointer. * @irq interrupt number. * @irq_mask the int_pin_cfg mask to configure interrupt type. - * @chip_period: chip internal period estimation (~1kHz). - * @it_timestamp: timestamp from previous interrupt. - * @data_timestamp: timestamp for next data sample. + * @timestamp: timestamping module * @vdd_supply: VDD voltage regulator for the chip. * @vddio_supply I/O voltage regulator for the chip. * @magn_disabled: magnetometer disabled for backward compatibility reason. * @magn_raw_to_gauss: coefficient to convert mag raw value to Gauss. * @magn_orient: magnetometer sensor chip orientation if available. * @suspended_sensors: sensors mask of sensors turned off for suspend + * @data: read buffer used for bulk reads. + * @it_timestamp: interrupt timestamp. */ struct inv_mpu6050_state { struct mutex lock; @@ -181,15 +205,16 @@ struct inv_mpu6050_state { int irq; u8 irq_mask; unsigned skip_samples; - s64 chip_period; - s64 it_timestamp; - s64 data_timestamp; + struct inv_sensors_timestamp timestamp; struct regulator *vdd_supply; struct regulator *vddio_supply; bool magn_disabled; s32 magn_raw_to_gauss[3]; struct iio_mount_matrix magn_orient; unsigned int suspended_sensors; + bool level_shifter; + u8 *data; + s64 it_timestamp; }; /*register and associated bit definition*/ @@ -241,12 +266,16 @@ struct inv_mpu6050_state { #define INV_MPU6050_REG_INT_ENABLE 0x38 #define INV_MPU6050_BIT_DATA_RDY_EN 0x01 #define INV_MPU6050_BIT_DMP_INT_EN 0x02 +#define INV_MPU6500_BIT_WOM_INT_EN BIT(6) +#define INV_ICM20608_BIT_WOM_INT_EN GENMASK(7, 5) #define INV_MPU6050_REG_RAW_ACCEL 0x3B #define INV_MPU6050_REG_TEMPERATURE 0x41 #define INV_MPU6050_REG_RAW_GYRO 0x43 #define INV_MPU6050_REG_INT_STATUS 0x3A +#define INV_MPU6500_BIT_WOM_INT BIT(6) +#define INV_ICM20608_BIT_WOM_INT GENMASK(7, 5) #define INV_MPU6050_BIT_FIFO_OVERFLOW_INT 0x10 #define INV_MPU6050_BIT_RAW_DATA_RDY_INT 0x01 @@ -279,6 +308,7 @@ struct inv_mpu6050_state { #define INV_MPU6050_REG_PWR_MGMT_1 0x6B #define INV_MPU6050_BIT_H_RESET 0x80 #define INV_MPU6050_BIT_SLEEP 0x40 +#define INV_MPU6050_BIT_CYCLE 0x20 #define INV_MPU6050_BIT_TEMP_DIS 0x08 #define INV_MPU6050_BIT_CLK_MASK 0x7 @@ -286,6 +316,11 @@ struct inv_mpu6050_state { #define INV_MPU6050_BIT_PWR_ACCL_STBY 0x38 #define INV_MPU6050_BIT_PWR_GYRO_STBY 0x07 +/* ICM20609 registers */ +#define INV_ICM20609_REG_ACCEL_WOM_X_THR 0x20 +#define INV_ICM20609_REG_ACCEL_WOM_Y_THR 0x21 +#define INV_ICM20609_REG_ACCEL_WOM_Z_THR 0x22 + /* ICM20602 register */ #define INV_ICM20602_REG_I2C_IF 0x70 #define INV_ICM20602_BIT_I2C_IF_DIS 0x40 @@ -305,16 +340,31 @@ struct inv_mpu6050_state { /* mpu6500 registers */ #define INV_MPU6500_REG_ACCEL_CONFIG_2 0x1D #define INV_ICM20689_BITS_FIFO_SIZE_MAX 0xC0 +#define INV_MPU6500_REG_LP_ODR 0x1E +#define INV_MPU6500_REG_WOM_THRESHOLD 0x1F +#define INV_MPU6500_REG_ACCEL_INTEL_CTRL 0x69 +#define INV_MPU6500_BIT_ACCEL_INTEL_EN BIT(7) +#define INV_MPU6500_BIT_ACCEL_INTEL_MODE BIT(6) #define INV_MPU6500_REG_ACCEL_OFFSET 0x77 /* delay time in milliseconds */ #define INV_MPU6050_POWER_UP_TIME 100 #define INV_MPU6050_TEMP_UP_TIME 100 -#define INV_MPU6050_ACCEL_UP_TIME 20 -#define INV_MPU6050_GYRO_UP_TIME 35 +#define INV_MPU6050_ACCEL_STARTUP_TIME 20 +#define INV_MPU6050_GYRO_STARTUP_TIME 60 #define INV_MPU6050_GYRO_DOWN_TIME 150 #define INV_MPU6050_SUSPEND_DELAY_MS 2000 +#define INV_MPU6500_GYRO_STARTUP_TIME 70 +#define INV_MPU6500_ACCEL_STARTUP_TIME 30 + +#define INV_ICM20602_GYRO_STARTUP_TIME 100 +#define INV_ICM20602_ACCEL_STARTUP_TIME 20 + +#define INV_ICM20690_GYRO_STARTUP_TIME 80 +#define INV_ICM20690_ACCEL_STARTUP_TIME 10 + + /* delay time in microseconds */ #define INV_MPU6050_REG_UP_TIME_MIN 5000 #define INV_MPU6050_REG_UP_TIME_MAX 10000 @@ -334,9 +384,6 @@ struct inv_mpu6050_state { #define INV_ICM20608_TEMP_OFFSET 8170 #define INV_ICM20608_TEMP_SCALE 3059976 -/* 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8 */ -#define INV_MPU6050_OUTPUT_DATA_SIZE 32 - #define INV_MPU6050_REG_INT_PIN_CFG 0x37 #define INV_MPU6050_ACTIVE_HIGH 0x00 #define INV_MPU6050_ACTIVE_LOW 0x80 @@ -367,16 +414,22 @@ struct inv_mpu6050_state { #define INV_MPU6000_WHOAMI_VALUE 0x68 #define INV_MPU6050_WHOAMI_VALUE 0x68 #define INV_MPU6500_WHOAMI_VALUE 0x70 +#define INV_MPU6880_WHOAMI_VALUE 0x78 #define INV_MPU9150_WHOAMI_VALUE 0x68 #define INV_MPU9250_WHOAMI_VALUE 0x71 #define INV_MPU9255_WHOAMI_VALUE 0x73 #define INV_MPU6515_WHOAMI_VALUE 0x74 #define INV_ICM20608_WHOAMI_VALUE 0xAF +#define INV_ICM20608D_WHOAMI_VALUE 0xAE #define INV_ICM20609_WHOAMI_VALUE 0xA6 #define INV_ICM20689_WHOAMI_VALUE 0x98 +#define INV_ICM20600_WHOAMI_VALUE 0x11 #define INV_ICM20602_WHOAMI_VALUE 0x12 #define INV_ICM20690_WHOAMI_VALUE 0x20 +#define INV_IAM20380_WHOAMI_VALUE 0xB5 #define INV_IAM20680_WHOAMI_VALUE 0xA9 +#define INV_IAM20680HP_WHOAMI_VALUE 0xF8 +#define INV_IAM20680HT_WHOAMI_VALUE 0xFA /* scan element definition for generic MPU6xxx devices */ enum inv_mpu6050_scan { @@ -407,6 +460,18 @@ enum inv_mpu6050_filter_e { NUM_MPU6050_FILTER }; +enum inv_mpu6050_lposc_e { + INV_MPU6050_LPOSC_4HZ = 4, + INV_MPU6050_LPOSC_8HZ, + INV_MPU6050_LPOSC_16HZ, + INV_MPU6050_LPOSC_31HZ, + INV_MPU6050_LPOSC_62HZ, + INV_MPU6050_LPOSC_125HZ, + INV_MPU6050_LPOSC_250HZ, + INV_MPU6050_LPOSC_500HZ, + NUM_MPU6050_LPOSC, +}; + /* IIO attribute address */ enum INV_MPU6050_IIO_ATTR_ADDR { ATTR_GYRO_MATRIX, @@ -440,7 +505,6 @@ int inv_mpu6050_probe_trigger(struct iio_dev *indio_dev, int irq_type); int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable); int inv_mpu6050_switch_engine(struct inv_mpu6050_state *st, bool en, unsigned int mask); -int inv_mpu6050_write_reg(struct inv_mpu6050_state *st, int reg, u8 val); int inv_mpu_acpi_create_mux_client(struct i2c_client *client); void inv_mpu_acpi_delete_mux_client(struct i2c_client *client); int inv_mpu_core_probe(struct regmap *regmap, int irq, const char *name, |