diff options
Diffstat (limited to 'drivers/iio/light/Kconfig')
| -rw-r--r-- | drivers/iio/light/Kconfig | 172 |
1 files changed, 166 insertions, 6 deletions
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 0d4447df7200..ac1408d374c9 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -43,6 +43,16 @@ config ADUX1020 To compile this driver as a module, choose M here: the module will be called adux1020. +config AL3000A + tristate "AL3000a ambient light sensor" + depends on I2C + help + Say Y here if you want to build a driver for the Dyna Image AL3000a + ambient light sensor. + + To compile this driver as a module, choose M here: the + module will be called al3000a. + config AL3010 tristate "AL3010 ambient light sensor" depends on I2C @@ -63,6 +73,17 @@ config AL3320A To compile this driver as a module, choose M here: the module will be called al3320a. +config APDS9160 + tristate "APDS9160 combined als and proximity sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build support for a Broadcom APDS9160 + combined ambient light and proximity sensor. + + To compile this driver as a module, choose M here: the + module will be called apds9160. + config APDS9300 tristate "APDS9300 ambient light sensor" depends on I2C @@ -73,6 +94,18 @@ config APDS9300 To compile this driver as a module, choose M here: the module will be called apds9300. +config APDS9306 + tristate "Avago APDS9306 Ambient Light Sensor" + depends on I2C + select REGMAP_I2C + select IIO_GTS_HELPER + help + If you say Y or M here, you get support for Avago APDS9306 + Ambient Light Sensor. + + If built as a dynamically linked module, it will be called + apds9306. + config APDS9960 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" select REGMAP_I2C @@ -87,13 +120,14 @@ config APDS9960 module will be called apds9960 config AS73211 - tristate "AMS AS73211 XYZ color sensor" + tristate "AMS AS73211 XYZ color sensor and AMS AS7331 UV sensor" depends on I2C select IIO_BUFFER select IIO_TRIGGERED_BUFFER help If you say yes here you get support for the AMS AS73211 - JENCOLOR(R) Digital XYZ Sensor. + JENCOLOR(R) Digital XYZ and the AMS AS7331 UVA, UVB and UVC + ultraviolet sensors. For triggered measurements, you will need an additional trigger driver like IIO_HRTIMER_TRIGGER or IIO_SYSFS_TRIGGER. @@ -101,6 +135,19 @@ config AS73211 This driver can also be built as a module. If so, the module will be called as73211. +config BH1745 + tristate "ROHM BH1745 colour sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IIO_GTS_HELPER + help + Say Y here to build support for the ROHM bh1745 colour sensor. + + To compile this driver as a module, choose M here: the module will + be called bh1745. + config BH1750 tristate "ROHM BH1750 ambient light sensor" depends on I2C @@ -222,7 +269,6 @@ config SENSORS_ISL29018 tristate "Intersil 29018 light and proximity sensor" depends on I2C select REGMAP_I2C - default n help If you say yes here you get support for ambient light sensing and proximity infrared sensing from Intersil ISL29018. @@ -252,6 +298,21 @@ config ISL29125 To compile this driver as a module, choose M here: the module will be called isl29125. +config ISL76682 + tristate "Intersil ISL76682 Light Sensor" + depends on I2C + select REGMAP_I2C + help + Say Y here if you want to build a driver for the Intersil ISL76682 + Ambient Light Sensor and IR Intensity sensor. This driver provides + the readouts via standard IIO sysfs and device interface. Both ALS + illuminance and IR illuminance are provided raw with separate scale + setting which can be configured via sysfs, the default scale is 1000 + lux, other options are 4000/16000/64000 lux. + + To compile this driver as a module, choose M here: the module will be + called isl76682. + config HID_SENSOR_ALS depends on HID_SENSOR_HUB select IIO_BUFFER @@ -289,6 +350,20 @@ config JSA1212 To compile this driver as a module, choose M here: the module will be called jsa1212. +config ROHM_BU27034 + tristate "ROHM BU27034 ambient light sensor" + depends on I2C + select REGMAP_I2C + select IIO_GTS_HELPER + select IIO_BUFFER + select IIO_KFIFO_BUF + help + Enable support for the ROHM BU27034 ambient light sensor. ROHM BU27034 + is an ambient light sesnor with 3 channels and 3 photo diodes capable + of detecting a very wide range of illuminance. + Typical application is adjusting LCD and backlight power of TVs and + mobile phones. + config RPR0521 tristate "ROHM RPR0521 ALS and proximity sensor driver" depends on I2C @@ -319,6 +394,17 @@ config SENSORS_LM3533 changes. The ALS-control output values can be set per zone for the three current output channels. +config LTR390 + tristate "LTR-390UV-01 ambient light and UV sensor" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the Lite-On LTR-390UV-01 + ambient light and UV sensor. + + This driver can also be built as a module. If so, the module + will be called ltr390. + config LTR501 tristate "LTR-501ALS-01 light sensor" depends on I2C @@ -394,11 +480,35 @@ config OPT3001 depends on I2C help If you say Y or M here, you get support for Texas Instruments - OPT3001 Ambient Light Sensor. + OPT3001 Ambient Light Sensor, OPT3002 Light-to-Digital Sensor. If built as a dynamically linked module, it will be called opt3001. +config OPT4001 + tristate "Texas Instruments OPT4001 Light Sensor" + depends on I2C + select REGMAP_I2C + help + If you say Y or M here, you get support for Texas Instruments + OPT4001 Ambient Light Sensor. + + If built as a dynamically linked module, it will be called + opt4001. + +config OPT4060 + tristate "Texas Instruments OPT4060 RGBW Color Sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + If you say Y or M here, you get support for Texas Instruments + OPT4060 RGBW Color Sensor. + + If built as a dynamically linked module, it will be called + opt4060. + config PA12203001 tristate "TXC PA12203001 light and proximity sensor" depends on I2C @@ -577,17 +687,56 @@ config VCNL4035 To compile this driver as a module, choose M here: the module will be called vcnl4035. +config VEML3235 + tristate "VEML3235 ambient light sensor" + select REGMAP_I2C + select IIO_GTS_HELPER + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VEML3235 + ambient light sensor. + + To compile this driver as a module, choose M here: the + module will be called veml3235. + config VEML6030 - tristate "VEML6030 ambient light sensor" + tristate "VEML6030 and VEML6035 ambient light sensors" select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + select IIO_GTS_HELPER depends on I2C help Say Y here if you want to build a driver for the Vishay VEML6030 - ambient light sensor (ALS). + and VEML6035 ambient light sensors (ALS). To compile this driver as a module, choose M here: the module will be called veml6030. +config VEML6040 + tristate "VEML6040 RGBW light sensor" + select REGMAP_I2C + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VEML6040 + RGBW light sensor. + + To compile this driver as a module, choose M here: the + module will be called veml6040. + +config VEML6046X00 + tristate "VEML6046X00 RGBIR color sensor" + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VEML6046X00 + high accuracy RGBIR color sensor. + + To compile this driver as a module, choose M here: the + module will be called veml6046x00. + config VEML6070 tristate "VEML6070 UV A light sensor" depends on I2C @@ -598,6 +747,17 @@ config VEML6070 To compile this driver as a module, choose M here: the module will be called veml6070. +config VEML6075 + tristate "VEML6075 UVA and UVB light sensor" + select REGMAP_I2C + depends on I2C + help + Say Y here if you want to build a driver for the Vishay VEML6075 UVA + and UVB light sensor. + + To compile this driver as a module, choose M here: the + module will be called veml6075. + config VL6180 tristate "VL6180 ALS, range and proximity sensor" depends on I2C |