diff options
Diffstat (limited to 'drivers/iio/pressure/Kconfig')
| -rw-r--r-- | drivers/iio/pressure/Kconfig | 126 |
1 files changed, 108 insertions, 18 deletions
diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index fc0d3cfca418..2fe9dc90cceb 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -16,15 +16,29 @@ config ABP060MG To compile this driver as a module, choose M here: the module will be called abp060mg. +config ROHM_BM1390 + tristate "ROHM BM1390GLV-Z pressure sensor driver" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Support for the ROHM BM1390 pressure sensor. The BM1390GLV-Z + can measure pressures ranging from 300 hPa to 1300 hPa with + configurable measurement averaging and internal FIFO. The + sensor does also provide temperature measurements. + config BMP280 - tristate "Bosch Sensortec BMP180/BMP280 pressure sensor I2C driver" + tristate "Bosch Sensortec BMP180/BMP280/BMP380/BMP580 pressure sensor driver" depends on (I2C || SPI_MASTER) select REGMAP select BMP280_I2C if (I2C) select BMP280_SPI if (SPI_MASTER) + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help - Say yes here to build support for Bosch Sensortec BMP180 and BMP280 - pressure and temperature sensors. Also supports the BME280 with + Say yes here to build support for Bosch Sensortec BMP180, BMP280, BMP380 + and BMP580 pressure and temperature sensors. Also supports the BME280 with an additional humidity sensor channel. To compile this driver as a module, choose M here: the core module @@ -100,6 +114,30 @@ config HP03 To compile this driver as a module, choose M here: the module will be called hp03. +config HSC030PA + tristate "Honeywell HSC/SSC TruStability pressure sensor series" + depends on (I2C || SPI_MASTER) + select HSC030PA_I2C if I2C + select HSC030PA_SPI if SPI_MASTER + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build support for the Honeywell TruStability + HSC and SSC pressure and temperature sensor series. + + To compile this driver as a module, choose M here: the module + will be called hsc030pa. + +config HSC030PA_I2C + tristate + depends on HSC030PA + depends on I2C + +config HSC030PA_SPI + tristate + depends on HSC030PA + depends on SPI_MASTER + config ICP10100 tristate "InvenSense ICP-101xx pressure and temperature sensor" depends on I2C @@ -148,6 +186,31 @@ config MPL3115 To compile this driver as a module, choose M here: the module will be called mpl3115. +config MPRLS0025PA + tristate "Honeywell MPRLS0025PA (MicroPressure sensors series)" + depends on (I2C || SPI_MASTER) + select MPRLS0025PA_I2C if I2C + select MPRLS0025PA_SPI if SPI_MASTER + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build support for the Honeywell MicroPressure pressure + sensor series. There are many different types with different pressure + range. These ranges can be set up in the device tree. + + To compile this driver as a module, choose M here: the module will be + called mprls0025pa. + +config MPRLS0025PA_I2C + tristate + depends on MPRLS0025PA + depends on I2C + +config MPRLS0025PA_SPI + tristate + depends on MPRLS0025PA + depends on SPI_MASTER + config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver" select IIO_BUFFER @@ -190,34 +253,49 @@ config MS5637 This driver can also be built as a module. If so, the module will be called ms5637. +config SDP500 + tristate "Sensirion SDP500 differential pressure sensor I2C driver" + depends on I2C + select CRC8 + help + Say Y here to build support for Sensirion SDP500 differential pressure + sensor I2C driver. + To compile this driver as a module, choose M here: the core module + will be called sdp500. + config IIO_ST_PRESS tristate "STMicroelectronics pressure sensor Driver" depends on (I2C || SPI_MASTER) && SYSFS select IIO_ST_SENSORS_CORE - select IIO_ST_PRESS_I2C if (I2C) - select IIO_ST_PRESS_SPI if (SPI_MASTER) select IIO_TRIGGERED_BUFFER if (IIO_BUFFER) help Say yes here to build support for STMicroelectronics pressure sensors: LPS001WP, LPS25H, LPS331AP, LPS22HB, LPS22HH. - This driver can also be built as a module. If so, these modules - will be created: - - st_pressure (core functions for the driver [it is mandatory]); - - st_pressure_i2c (necessary for the I2C devices [optional*]); - - st_pressure_spi (necessary for the SPI devices [optional*]); - - (*) one of these is necessary to do something. + Also need to enable at least one of I2C and SPI interface drivers + below. config IIO_ST_PRESS_I2C - tristate - depends on IIO_ST_PRESS - depends on IIO_ST_SENSORS_I2C + tristate "STMicroelectronics pressure sensor I2C Interface" + depends on I2C && IIO_ST_PRESS + default I2C && IIO_ST_PRESS + select IIO_ST_SENSORS_I2C + help + Build support for STMicroelectronics pressure sensor I2C interface. + + To compile this driver as a module, choose M here. The module + will be called st_pressure_i2c. config IIO_ST_PRESS_SPI - tristate - depends on IIO_ST_PRESS - depends on IIO_ST_SENSORS_SPI + tristate "STMicroelectronics pressure sensor SPI Interface" + depends on SPI_MASTER && IIO_ST_PRESS + default SPI_MASTER && IIO_ST_PRESS + select IIO_ST_SENSORS_SPI + help + Build support for STMicroelectronics pressure sensor SPI interface. + + To compile this driver as a module, choose M here. The module + will be called st_pressure_spi. config T5403 tristate "EPCOS T5403 digital barometric pressure sensor driver" @@ -261,4 +339,16 @@ config ZPA2326_SPI tristate select REGMAP_SPI +config ADP810 + tristate "Aosong adp810 differential pressure and temperature sensor" + depends on I2C + select CRC8 + help + Say yes here to build adp810 differential pressure and temperature + sensor driver. ADP810 can measure pressure range up to 500Pa. + It supports an I2C interface for data communication. + + To compile this driver as a module, choose M here: the module will + be called adp810 + endmenu |