diff options
Diffstat (limited to 'drivers/iio/pressure/bmp280-core.c')
| -rw-r--r-- | drivers/iio/pressure/bmp280-core.c | 797 |
1 files changed, 647 insertions, 150 deletions
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index a8b97b9b0461..d983ce9c0b99 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -16,6 +16,11 @@ * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp390-ds002.pdf * https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bmp581-ds004.pdf * + * Sensor API: + * https://github.com/boschsensortec/BME280_SensorAPI + * https://github.com/boschsensortec/BMP3_SensorAPI + * https://github.com/boschsensortec/BMP5_SensorAPI + * * Notice: * The link to the bmp180 datasheet points to an outdated version missing these changes: * - Changed document referral from ANP015 to BST-MPS-AN004-00 on page 26 @@ -37,12 +42,15 @@ #include <linux/module.h> #include <linux/nvmem-provider.h> #include <linux/pm_runtime.h> +#include <linux/property.h> #include <linux/random.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <linux/types.h> #include <linux/iio/buffer.h> #include <linux/iio/iio.h> +#include <linux/iio/trigger.h> #include <linux/iio/trigger_consumer.h> #include <linux/iio/triggered_buffer.h> @@ -340,10 +348,19 @@ static int bmp280_read_calib(struct bmp280_data *data) return 0; } +/* + * These enums are used for indexing into the array of humidity parameters + * for BME280. Due to some weird indexing, unaligned BE/LE accesses co-exist in + * order to prepare the FIELD_{GET/PREP}() fields. Table 16 in Section 4.2.2 of + * the datasheet. + */ +enum { H2 = 0, H3 = 2, H4 = 3, H5 = 4, H6 = 6 }; + static int bme280_read_calib(struct bmp280_data *data) { struct bmp280_calib *calib = &data->calib.bmp280; struct device *dev = data->dev; + s16 h4_upper, h4_lower, tmp_1, tmp_2, tmp_3; unsigned int tmp; int ret; @@ -352,14 +369,6 @@ static int bme280_read_calib(struct bmp280_data *data) if (ret) return ret; - /* - * Read humidity calibration values. - * Due to some odd register addressing we cannot just - * do a big bulk read. Instead, we have to read each Hx - * value separately and sometimes do some bit shifting... - * Humidity data is only available on BME280. - */ - ret = regmap_read(data->regmap, BME280_REG_COMP_H1, &tmp); if (ret) { dev_err(dev, "failed to read H1 comp value\n"); @@ -368,43 +377,23 @@ static int bme280_read_calib(struct bmp280_data *data) calib->H1 = tmp; ret = regmap_bulk_read(data->regmap, BME280_REG_COMP_H2, - &data->le16, sizeof(data->le16)); - if (ret) { - dev_err(dev, "failed to read H2 comp value\n"); - return ret; - } - calib->H2 = sign_extend32(le16_to_cpu(data->le16), 15); - - ret = regmap_read(data->regmap, BME280_REG_COMP_H3, &tmp); + data->bme280_humid_cal_buf, + sizeof(data->bme280_humid_cal_buf)); if (ret) { - dev_err(dev, "failed to read H3 comp value\n"); + dev_err(dev, "failed to read humidity calibration values\n"); return ret; } - calib->H3 = tmp; - ret = regmap_bulk_read(data->regmap, BME280_REG_COMP_H4, - &data->be16, sizeof(data->be16)); - if (ret) { - dev_err(dev, "failed to read H4 comp value\n"); - return ret; - } - calib->H4 = sign_extend32(((be16_to_cpu(data->be16) >> 4) & 0xff0) | - (be16_to_cpu(data->be16) & 0xf), 11); - - ret = regmap_bulk_read(data->regmap, BME280_REG_COMP_H5, - &data->le16, sizeof(data->le16)); - if (ret) { - dev_err(dev, "failed to read H5 comp value\n"); - return ret; - } - calib->H5 = sign_extend32(FIELD_GET(BME280_COMP_H5_MASK, le16_to_cpu(data->le16)), 11); - - ret = regmap_read(data->regmap, BME280_REG_COMP_H6, &tmp); - if (ret) { - dev_err(dev, "failed to read H6 comp value\n"); - return ret; - } - calib->H6 = sign_extend32(tmp, 7); + calib->H2 = get_unaligned_le16(&data->bme280_humid_cal_buf[H2]); + calib->H3 = data->bme280_humid_cal_buf[H3]; + tmp_1 = get_unaligned_be16(&data->bme280_humid_cal_buf[H4]); + tmp_2 = FIELD_GET(BME280_COMP_H4_GET_MASK_UP, tmp_1); + h4_upper = FIELD_PREP(BME280_COMP_H4_PREP_MASK_UP, tmp_2); + h4_lower = FIELD_GET(BME280_COMP_H4_MASK_LOW, tmp_1); + calib->H4 = sign_extend32(h4_upper | h4_lower, 11); + tmp_3 = get_unaligned_le16(&data->bme280_humid_cal_buf[H5]); + calib->H5 = sign_extend32(FIELD_GET(BME280_COMP_H5_MASK, tmp_3), 11); + calib->H6 = data->bme280_humid_cal_buf[H6]; return 0; } @@ -635,6 +624,14 @@ static int bmp280_read_raw_impl(struct iio_dev *indio_dev, switch (mask) { case IIO_CHAN_INFO_PROCESSED: + ret = data->chip_info->set_mode(data, BMP280_FORCED); + if (ret) + return ret; + + ret = data->chip_info->wait_conv(data); + if (ret) + return ret; + switch (chan->type) { case IIO_HUMIDITYRELATIVE: ret = data->chip_info->read_humid(data, &chan_value); @@ -664,6 +661,14 @@ static int bmp280_read_raw_impl(struct iio_dev *indio_dev, return -EINVAL; } case IIO_CHAN_INFO_RAW: + ret = data->chip_info->set_mode(data, BMP280_FORCED); + if (ret) + return ret; + + ret = data->chip_info->wait_conv(data); + if (ret) + return ret; + switch (chan->type) { case IIO_HUMIDITYRELATIVE: ret = data->chip_info->read_humid(data, &chan_value); @@ -747,7 +752,6 @@ static int bmp280_read_raw(struct iio_dev *indio_dev, pm_runtime_get_sync(data->dev); ret = bmp280_read_raw_impl(indio_dev, chan, val, val2, mask); - pm_runtime_mark_last_busy(data->dev); pm_runtime_put_autosuspend(data->dev); return ret; @@ -922,7 +926,6 @@ static int bmp280_write_raw(struct iio_dev *indio_dev, pm_runtime_get_sync(data->dev); ret = bmp280_write_raw_impl(indio_dev, chan, val, val2, mask); - pm_runtime_mark_last_busy(data->dev); pm_runtime_put_autosuspend(data->dev); return ret; @@ -983,6 +986,95 @@ static const unsigned long bme280_avail_scan_masks[] = { 0 }; +static int bmp280_preinit(struct bmp280_data *data) +{ + struct device *dev = data->dev; + unsigned int reg; + int ret; + + ret = regmap_write(data->regmap, BMP280_REG_RESET, BMP280_RST_SOFT_CMD); + if (ret) + return dev_err_probe(dev, ret, "Failed to reset device.\n"); + + /* + * According to the datasheet in Chapter 1: Specification, Table 2, + * after resetting, the device uses the complete power-on sequence so + * it needs to wait for the defined start-up time. + */ + fsleep(data->start_up_time_us); + + ret = regmap_read(data->regmap, BMP280_REG_STATUS, ®); + if (ret) + return dev_err_probe(dev, ret, "Failed to read status register.\n"); + + if (reg & BMP280_REG_STATUS_IM_UPDATE) + return dev_err_probe(dev, -EIO, "Failed to copy NVM contents.\n"); + + return 0; +} + +static const u8 bmp280_operation_mode[] = { + [BMP280_SLEEP] = BMP280_MODE_SLEEP, + [BMP280_FORCED] = BMP280_MODE_FORCED, + [BMP280_NORMAL] = BMP280_MODE_NORMAL, +}; + +static int bmp280_set_mode(struct bmp280_data *data, enum bmp280_op_mode mode) +{ + int ret; + + ret = regmap_write_bits(data->regmap, BMP280_REG_CTRL_MEAS, + BMP280_MODE_MASK, bmp280_operation_mode[mode]); + if (ret) { + dev_err(data->dev, "failed to write ctrl_meas register.\n"); + return ret; + } + + data->op_mode = mode; + + return 0; +} + +static int bmp280_wait_conv(struct bmp280_data *data) +{ + unsigned int reg, meas_time_us; + int ret; + + /* Constant part of the measurement time */ + meas_time_us = BMP280_MEAS_OFFSET; + + /* + * Check if we are using a BME280 device, + * Humidity measurement time + */ + if (data->chip_info->oversampling_humid_avail) + meas_time_us += BMP280_PRESS_HUMID_MEAS_OFFSET + + BIT(data->oversampling_humid) * BMP280_MEAS_DUR; + + /* Pressure measurement time */ + meas_time_us += BMP280_PRESS_HUMID_MEAS_OFFSET + + BIT(data->oversampling_press) * BMP280_MEAS_DUR; + + /* Temperature measurement time */ + meas_time_us += BIT(data->oversampling_temp) * BMP280_MEAS_DUR; + + /* Waiting time according to the BM(P/E)2 Sensor API */ + fsleep(meas_time_us); + + ret = regmap_read(data->regmap, BMP280_REG_STATUS, ®); + if (ret) { + dev_err(data->dev, "failed to read status register.\n"); + return ret; + } + + if (reg & BMP280_REG_STATUS_MEAS_BIT) { + dev_err(data->dev, "Measurement cycle didn't complete.\n"); + return -EBUSY; + } + + return 0; +} + static int bmp280_chip_config(struct bmp280_data *data) { u8 osrs = FIELD_PREP(BMP280_OSRS_TEMP_MASK, data->oversampling_temp + 1) | @@ -993,7 +1085,7 @@ static int bmp280_chip_config(struct bmp280_data *data) BMP280_OSRS_TEMP_MASK | BMP280_OSRS_PRESS_MASK | BMP280_MODE_MASK, - osrs | BMP280_MODE_NORMAL); + osrs | BMP280_MODE_SLEEP); if (ret) { dev_err(data->dev, "failed to write ctrl_meas register\n"); return ret; @@ -1015,7 +1107,13 @@ static irqreturn_t bmp280_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct bmp280_data *data = iio_priv(indio_dev); - s32 adc_temp, adc_press, t_fine; + u32 adc_temp, adc_press; + s32 t_fine; + struct { + u32 comp_press; + s32 comp_temp; + aligned_s64 timestamp; + } buffer; int ret; guard(mutex)(&data->lock); @@ -1035,7 +1133,7 @@ static irqreturn_t bmp280_trigger_handler(int irq, void *p) goto out; } - data->sensor_data[1] = bmp280_compensate_temp(data, adc_temp); + buffer.comp_temp = bmp280_compensate_temp(data, adc_temp); /* Pressure calculations */ adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(&data->buf[0])); @@ -1045,11 +1143,10 @@ static irqreturn_t bmp280_trigger_handler(int irq, void *p) } t_fine = bmp280_calc_t_fine(data, adc_temp); + buffer.comp_press = bmp280_compensate_press(data, adc_press, t_fine); - data->sensor_data[0] = bmp280_compensate_press(data, adc_press, t_fine); - - iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data, - iio_get_time_ns(indio_dev)); + iio_push_to_buffers_with_ts(indio_dev, &buffer, sizeof(buffer), + iio_get_time_ns(indio_dev)); out: iio_trigger_notify_done(indio_dev->trig); @@ -1067,7 +1164,7 @@ const struct bmp280_chip_info bmp280_chip_info = { .chip_id = bmp280_chip_ids, .num_chip_id = ARRAY_SIZE(bmp280_chip_ids), .regmap_config = &bmp280_regmap_config, - .start_up_time = 2000, + .start_up_time_us = 2000, .channels = bmp280_channels, .num_channels = ARRAY_SIZE(bmp280_channels), .avail_scan_masks = bmp280_avail_scan_masks, @@ -1099,10 +1196,13 @@ const struct bmp280_chip_info bmp280_chip_info = { .read_temp = bmp280_read_temp, .read_press = bmp280_read_press, .read_calib = bmp280_read_calib, + .set_mode = bmp280_set_mode, + .wait_conv = bmp280_wait_conv, + .preinit = bmp280_preinit, .trigger_handler = bmp280_trigger_handler, }; -EXPORT_SYMBOL_NS(bmp280_chip_info, IIO_BMP280); +EXPORT_SYMBOL_NS(bmp280_chip_info, "IIO_BMP280"); static int bme280_chip_config(struct bmp280_data *data) { @@ -1128,7 +1228,14 @@ static irqreturn_t bme280_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct bmp280_data *data = iio_priv(indio_dev); - s32 adc_temp, adc_press, adc_humidity, t_fine; + u32 adc_temp, adc_press, adc_humidity; + s32 t_fine; + struct { + u32 comp_press; + s32 comp_temp; + u32 comp_humidity; + aligned_s64 timestamp; + } buffer = { }; /* Don't leak uninitialized stack to userspace. */ int ret; guard(mutex)(&data->lock); @@ -1148,7 +1255,7 @@ static irqreturn_t bme280_trigger_handler(int irq, void *p) goto out; } - data->sensor_data[1] = bmp280_compensate_temp(data, adc_temp); + buffer.comp_temp = bmp280_compensate_temp(data, adc_temp); /* Pressure calculations */ adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(&data->buf[0])); @@ -1158,8 +1265,7 @@ static irqreturn_t bme280_trigger_handler(int irq, void *p) } t_fine = bmp280_calc_t_fine(data, adc_temp); - - data->sensor_data[0] = bmp280_compensate_press(data, adc_press, t_fine); + buffer.comp_press = bmp280_compensate_press(data, adc_press, t_fine); /* Humidity calculations */ adc_humidity = get_unaligned_be16(&data->buf[6]); @@ -1168,10 +1274,12 @@ static irqreturn_t bme280_trigger_handler(int irq, void *p) dev_err(data->dev, "reading humidity skipped\n"); goto out; } - data->sensor_data[2] = bme280_compensate_humidity(data, adc_humidity, t_fine); - iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data, - iio_get_time_ns(indio_dev)); + buffer.comp_humidity = bme280_compensate_humidity(data, adc_humidity, + t_fine); + + iio_push_to_buffers_with_ts(indio_dev, &buffer, sizeof(buffer), + iio_get_time_ns(indio_dev)); out: iio_trigger_notify_done(indio_dev->trig); @@ -1179,6 +1287,63 @@ out: return IRQ_HANDLED; } +static int __bmp280_trigger_probe(struct iio_dev *indio_dev, + const struct iio_trigger_ops *trigger_ops, + int (*int_pin_config)(struct bmp280_data *data), + irq_handler_t irq_thread_handler) +{ + struct bmp280_data *data = iio_priv(indio_dev); + struct device *dev = data->dev; + u32 irq_type; + int ret, irq; + + irq = fwnode_irq_get(dev_fwnode(dev), 0); + if (irq < 0) + return dev_err_probe(dev, irq, "No interrupt found.\n"); + + irq_type = irq_get_trigger_type(irq); + switch (irq_type) { + case IRQF_TRIGGER_RISING: + data->trig_active_high = true; + break; + case IRQF_TRIGGER_FALLING: + data->trig_active_high = false; + break; + default: + return dev_err_probe(dev, -EINVAL, "Invalid interrupt type specified.\n"); + } + + data->trig_open_drain = + fwnode_property_read_bool(dev_fwnode(dev), "int-open-drain"); + + ret = int_pin_config(data); + if (ret) + return ret; + + data->trig = devm_iio_trigger_alloc(data->dev, "%s-dev%d", + indio_dev->name, + iio_device_id(indio_dev)); + if (!data->trig) + return -ENOMEM; + + data->trig->ops = trigger_ops; + iio_trigger_set_drvdata(data->trig, data); + + ret = devm_request_threaded_irq(data->dev, irq, NULL, + irq_thread_handler, IRQF_ONESHOT, + indio_dev->name, indio_dev); + if (ret) + return dev_err_probe(dev, ret, "request IRQ failed.\n"); + + ret = devm_iio_trigger_register(data->dev, data->trig); + if (ret) + return dev_err_probe(dev, ret, "iio trigger register failed.\n"); + + indio_dev->trig = iio_trigger_get(data->trig); + + return 0; +} + static const u8 bme280_chip_ids[] = { BME280_CHIP_ID }; static const int bme280_humid_coeffs[] = { 1000, 1024 }; @@ -1187,7 +1352,7 @@ const struct bmp280_chip_info bme280_chip_info = { .chip_id = bme280_chip_ids, .num_chip_id = ARRAY_SIZE(bme280_chip_ids), .regmap_config = &bme280_regmap_config, - .start_up_time = 2000, + .start_up_time_us = 2000, .channels = bme280_channels, .num_channels = ARRAY_SIZE(bme280_channels), .avail_scan_masks = bme280_avail_scan_masks, @@ -1216,10 +1381,13 @@ const struct bmp280_chip_info bme280_chip_info = { .read_press = bmp280_read_press, .read_humid = bme280_read_humid, .read_calib = bme280_read_calib, + .set_mode = bmp280_set_mode, + .wait_conv = bmp280_wait_conv, + .preinit = bmp280_preinit, .trigger_handler = bme280_trigger_handler, }; -EXPORT_SYMBOL_NS(bme280_chip_info, IIO_BMP280); +EXPORT_SYMBOL_NS(bme280_chip_info, "IIO_BMP280"); /* * Helper function to send a command to BMP3XX sensors. @@ -1251,7 +1419,7 @@ static int bmp380_cmd(struct bmp280_data *data, u8 cmd) return ret; } /* Wait for 2ms for command to be processed */ - usleep_range(data->start_up_time, data->start_up_time + 100); + fsleep(data->start_up_time_us); /* Check for command processing error */ ret = regmap_read(data->regmap, BMP380_REG_ERROR, ®); if (ret) { @@ -1502,6 +1670,64 @@ static int bmp380_preinit(struct bmp280_data *data) return bmp380_cmd(data, BMP380_CMD_SOFT_RESET); } +static const u8 bmp380_operation_mode[] = { + [BMP280_SLEEP] = BMP380_MODE_SLEEP, + [BMP280_FORCED] = BMP380_MODE_FORCED, + [BMP280_NORMAL] = BMP380_MODE_NORMAL, +}; + +static int bmp380_set_mode(struct bmp280_data *data, enum bmp280_op_mode mode) +{ + int ret; + + ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL, + BMP380_MODE_MASK, + FIELD_PREP(BMP380_MODE_MASK, + bmp380_operation_mode[mode])); + if (ret) { + dev_err(data->dev, "failed to write power control register.\n"); + return ret; + } + + data->op_mode = mode; + + return 0; +} + +static int bmp380_wait_conv(struct bmp280_data *data) +{ + unsigned int reg; + int ret, meas_time_us; + + /* Offset measurement time */ + meas_time_us = BMP380_MEAS_OFFSET; + + /* Pressure measurement time */ + meas_time_us += BMP380_PRESS_MEAS_OFFSET + + BIT(data->oversampling_press) * BMP380_MEAS_DUR; + + /* Temperature measurement time */ + meas_time_us += BMP380_TEMP_MEAS_OFFSET + + BIT(data->oversampling_temp) * BMP380_MEAS_DUR; + + /* Measurement time defined in Datasheet Section 3.9.2 */ + fsleep(meas_time_us); + + ret = regmap_read(data->regmap, BMP380_REG_STATUS, ®); + if (ret) { + dev_err(data->dev, "failed to read status register.\n"); + return ret; + } + + if (!((reg & BMP380_STATUS_DRDY_PRESS_MASK) && + (reg & BMP380_STATUS_DRDY_TEMP_MASK))) { + dev_err(data->dev, "Measurement cycle didn't complete.\n"); + return -EBUSY; + } + + return 0; +} + static int bmp380_chip_config(struct bmp280_data *data) { bool change = false, aux; @@ -1545,14 +1771,12 @@ static int bmp380_chip_config(struct bmp280_data *data) change = change || aux; /* Set filter data */ - ret = regmap_update_bits_check(data->regmap, BMP380_REG_CONFIG, BMP380_FILTER_MASK, - FIELD_PREP(BMP380_FILTER_MASK, data->iir_filter_coeff), - &aux); + ret = regmap_update_bits(data->regmap, BMP380_REG_CONFIG, BMP380_FILTER_MASK, + FIELD_PREP(BMP380_FILTER_MASK, data->iir_filter_coeff)); if (ret) { dev_err(data->dev, "failed to write config register\n"); return ret; } - change = change || aux; if (change) { /* @@ -1564,17 +1788,19 @@ static int bmp380_chip_config(struct bmp280_data *data) * Resets sensor measurement loop toggling between sleep and * normal operating modes. */ - ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL, - BMP380_MODE_MASK, - FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_SLEEP)); + ret = bmp380_set_mode(data, BMP280_SLEEP); if (ret) { dev_err(data->dev, "failed to set sleep mode\n"); return ret; } - usleep_range(2000, 2500); - ret = regmap_write_bits(data->regmap, BMP380_REG_POWER_CONTROL, - BMP380_MODE_MASK, - FIELD_PREP(BMP380_MODE_MASK, BMP380_MODE_NORMAL)); + + /* + * According to the BMP3 Sensor API, the sensor needs 5ms + * in order to go to the sleep mode. + */ + fsleep(5 * USEC_PER_MSEC); + + ret = bmp380_set_mode(data, BMP280_NORMAL); if (ret) { dev_err(data->dev, "failed to set normal mode\n"); return ret; @@ -1585,7 +1811,7 @@ static int bmp380_chip_config(struct bmp280_data *data) * formula in datasheet section 3.9.2 with an offset of ~+15% * as it seen as well in table 3.9.1. */ - msleep(150); + fsleep(150 * USEC_PER_MSEC); /* Check config error flag */ ret = regmap_read(data->regmap, BMP380_REG_ERROR, &tmp); @@ -1600,7 +1826,77 @@ static int bmp380_chip_config(struct bmp280_data *data) } } - return 0; + /* Dummy read to empty data registers. */ + ret = bmp380_read_press(data, &tmp); + if (ret) + return ret; + + ret = bmp380_set_mode(data, BMP280_SLEEP); + if (ret) + dev_err(data->dev, "failed to set sleep mode.\n"); + + return ret; +} + +static int bmp380_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct bmp280_data *data = iio_trigger_get_drvdata(trig); + int ret; + + guard(mutex)(&data->lock); + + ret = regmap_update_bits(data->regmap, BMP380_REG_INT_CONTROL, + BMP380_INT_CTRL_DRDY_EN, + FIELD_PREP(BMP380_INT_CTRL_DRDY_EN, !!state)); + if (ret) + dev_err(data->dev, + "Could not %s interrupt.\n", str_enable_disable(state)); + return ret; +} + +static const struct iio_trigger_ops bmp380_trigger_ops = { + .set_trigger_state = &bmp380_data_rdy_trigger_set_state, +}; + +static int bmp380_int_pin_config(struct bmp280_data *data) +{ + int pin_drive_cfg = FIELD_PREP(BMP380_INT_CTRL_OPEN_DRAIN, + data->trig_open_drain); + int pin_level_cfg = FIELD_PREP(BMP380_INT_CTRL_LEVEL, + data->trig_active_high); + int ret, int_pin_cfg = pin_drive_cfg | pin_level_cfg; + + ret = regmap_update_bits(data->regmap, BMP380_REG_INT_CONTROL, + BMP380_INT_CTRL_SETTINGS_MASK, int_pin_cfg); + if (ret) + dev_err(data->dev, "Could not set interrupt settings.\n"); + + return ret; +} + +static irqreturn_t bmp380_irq_thread_handler(int irq, void *p) +{ + struct iio_dev *indio_dev = p; + struct bmp280_data *data = iio_priv(indio_dev); + unsigned int int_ctrl; + int ret; + + ret = regmap_read(data->regmap, BMP380_REG_INT_STATUS, &int_ctrl); + if (ret) + return IRQ_NONE; + + if (FIELD_GET(BMP380_INT_STATUS_DRDY, int_ctrl)) + iio_trigger_poll_nested(data->trig); + + return IRQ_HANDLED; +} + +static int bmp380_trigger_probe(struct iio_dev *indio_dev) +{ + return __bmp280_trigger_probe(indio_dev, &bmp380_trigger_ops, + bmp380_int_pin_config, + bmp380_irq_thread_handler); } static irqreturn_t bmp380_trigger_handler(int irq, void *p) @@ -1608,7 +1904,13 @@ static irqreturn_t bmp380_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct bmp280_data *data = iio_priv(indio_dev); - s32 adc_temp, adc_press, t_fine; + u32 adc_temp, adc_press; + s32 t_fine; + struct { + u32 comp_press; + s32 comp_temp; + aligned_s64 timestamp; + } buffer; int ret; guard(mutex)(&data->lock); @@ -1628,7 +1930,7 @@ static irqreturn_t bmp380_trigger_handler(int irq, void *p) goto out; } - data->sensor_data[1] = bmp380_compensate_temp(data, adc_temp); + buffer.comp_temp = bmp380_compensate_temp(data, adc_temp); /* Pressure calculations */ adc_press = get_unaligned_le24(&data->buf[0]); @@ -1638,11 +1940,10 @@ static irqreturn_t bmp380_trigger_handler(int irq, void *p) } t_fine = bmp380_calc_t_fine(data, adc_temp); + buffer.comp_press = bmp380_compensate_press(data, adc_press, t_fine); - data->sensor_data[0] = bmp380_compensate_press(data, adc_press, t_fine); - - iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data, - iio_get_time_ns(indio_dev)); + iio_push_to_buffers_with_ts(indio_dev, &buffer, sizeof(buffer), + iio_get_time_ns(indio_dev)); out: iio_trigger_notify_done(indio_dev->trig); @@ -1662,7 +1963,7 @@ const struct bmp280_chip_info bmp380_chip_info = { .num_chip_id = ARRAY_SIZE(bmp380_chip_ids), .regmap_config = &bmp380_regmap_config, .spi_read_extra_byte = true, - .start_up_time = 2000, + .start_up_time_us = 2000, .channels = bmp380_channels, .num_channels = ARRAY_SIZE(bmp380_channels), .avail_scan_masks = bmp280_avail_scan_masks, @@ -1692,11 +1993,14 @@ const struct bmp280_chip_info bmp380_chip_info = { .read_temp = bmp380_read_temp, .read_press = bmp380_read_press, .read_calib = bmp380_read_calib, + .set_mode = bmp380_set_mode, + .wait_conv = bmp380_wait_conv, .preinit = bmp380_preinit, + .trigger_probe = bmp380_trigger_probe, .trigger_handler = bmp380_trigger_handler, }; -EXPORT_SYMBOL_NS(bmp380_chip_info, IIO_BMP280); +EXPORT_SYMBOL_NS(bmp380_chip_info, "IIO_BMP280"); static int bmp580_soft_reset(struct bmp280_data *data) { @@ -1708,7 +2012,8 @@ static int bmp580_soft_reset(struct bmp280_data *data) dev_err(data->dev, "failed to send reset command to device\n"); return ret; } - usleep_range(2000, 2500); + /* From datasheet's table 4: electrical characteristics */ + fsleep(2000); /* Dummy read of chip_id */ ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, ®); @@ -1910,7 +2215,7 @@ static int bmp580_nvmem_read_impl(void *priv, unsigned int offset, void *val, goto exit; } /* Wait standby transition time */ - usleep_range(2500, 3000); + fsleep(2500); while (bytes >= sizeof(*dst)) { addr = bmp580_nvmem_addrs[offset / sizeof(*dst)]; @@ -1951,7 +2256,6 @@ static int bmp580_nvmem_read(void *priv, unsigned int offset, void *val, pm_runtime_get_sync(data->dev); ret = bmp580_nvmem_read_impl(priv, offset, val, bytes); - pm_runtime_mark_last_busy(data->dev); pm_runtime_put_autosuspend(data->dev); return ret; @@ -1976,7 +2280,7 @@ static int bmp580_nvmem_write_impl(void *priv, unsigned int offset, void *val, goto exit; } /* Wait standby transition time */ - usleep_range(2500, 3000); + fsleep(2500); while (bytes >= sizeof(*buf)) { addr = bmp580_nvmem_addrs[offset / sizeof(*buf)]; @@ -2026,7 +2330,6 @@ static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val, pm_runtime_get_sync(data->dev); ret = bmp580_nvmem_write_impl(priv, offset, val, bytes); - pm_runtime_mark_last_busy(data->dev); pm_runtime_put_autosuspend(data->dev); return ret; @@ -2079,6 +2382,70 @@ static int bmp580_preinit(struct bmp280_data *data) return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config)); } +static const u8 bmp580_operation_mode[] = { + [BMP280_SLEEP] = BMP580_MODE_SLEEP, + [BMP280_FORCED] = BMP580_MODE_FORCED, + [BMP280_NORMAL] = BMP580_MODE_NORMAL, +}; + +static int bmp580_set_mode(struct bmp280_data *data, enum bmp280_op_mode mode) +{ + struct device *dev = data->dev; + int ret; + + if (mode == BMP280_FORCED) { + ret = regmap_set_bits(data->regmap, BMP580_REG_DSP_CONFIG, + BMP580_DSP_IIR_FORCED_FLUSH); + if (ret) { + dev_err(dev, "Could not flush IIR filter constants.\n"); + return ret; + } + } + + ret = regmap_write_bits(data->regmap, BMP580_REG_ODR_CONFIG, + BMP580_MODE_MASK, + FIELD_PREP(BMP580_MODE_MASK, + bmp580_operation_mode[mode])); + if (ret) { + dev_err(dev, "failed to write power control register.\n"); + return ret; + } + + data->op_mode = mode; + + return 0; +} + +static int bmp580_wait_conv(struct bmp280_data *data) +{ + /* + * Taken from datasheet, Section 2 "Specification, Table 3 "Electrical + * characteristics. + */ + static const int time_conv_press[] = { + 0, 1050, 1785, 3045, 5670, 10920, 21420, 42420, + 84420, + }; + static const int time_conv_temp[] = { + 0, 1050, 1105, 1575, 2205, 3465, 6090, 11340, + 21840, + }; + int meas_time_us; + + meas_time_us = 4 * USEC_PER_MSEC + + time_conv_temp[data->oversampling_temp] + + time_conv_press[data->oversampling_press]; + + /* + * Measurement time mentioned in Chapter 2, Table 4 of the datasheet. + * The extra 4ms is the required mode change to start of measurement + * time. + */ + fsleep(meas_time_us); + + return 0; +} + static int bmp580_chip_config(struct bmp280_data *data) { bool change = false, aux; @@ -2096,7 +2463,7 @@ static int bmp580_chip_config(struct bmp280_data *data) return ret; } /* From datasheet's table 4: electrical characteristics */ - usleep_range(2500, 3000); + fsleep(2500); /* Set default DSP mode settings */ reg_val = FIELD_PREP(BMP580_DSP_COMP_MASK, BMP580_DSP_PRESS_TEMP_COMP_EN) | @@ -2141,26 +2508,13 @@ static int bmp580_chip_config(struct bmp280_data *data) reg_val = FIELD_PREP(BMP580_DSP_IIR_PRESS_MASK, data->iir_filter_coeff) | FIELD_PREP(BMP580_DSP_IIR_TEMP_MASK, data->iir_filter_coeff); - ret = regmap_update_bits_check(data->regmap, BMP580_REG_DSP_IIR, - BMP580_DSP_IIR_PRESS_MASK | - BMP580_DSP_IIR_TEMP_MASK, - reg_val, &aux); + ret = regmap_update_bits(data->regmap, BMP580_REG_DSP_IIR, + BMP580_DSP_IIR_PRESS_MASK | BMP580_DSP_IIR_TEMP_MASK, + reg_val); if (ret) { dev_err(data->dev, "failed to write config register\n"); return ret; } - change = change || aux; - - /* Restore sensor to normal operation mode */ - ret = regmap_write_bits(data->regmap, BMP580_REG_ODR_CONFIG, - BMP580_MODE_MASK, - FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_NORMAL)); - if (ret) { - dev_err(data->dev, "failed to set normal mode\n"); - return ret; - } - /* From datasheet's table 4: electrical characteristics */ - usleep_range(3000, 3500); if (change) { /* @@ -2185,11 +2539,84 @@ static int bmp580_chip_config(struct bmp280_data *data) return 0; } +static int bmp580_data_rdy_trigger_set_state(struct iio_trigger *trig, + bool state) +{ + struct bmp280_data *data = iio_trigger_get_drvdata(trig); + int ret; + + guard(mutex)(&data->lock); + + ret = regmap_update_bits(data->regmap, BMP580_REG_INT_CONFIG, + BMP580_INT_CONFIG_INT_EN, + FIELD_PREP(BMP580_INT_CONFIG_INT_EN, !!state)); + if (ret) + dev_err(data->dev, + "Could not %s interrupt.\n", str_enable_disable(state)); + return ret; +} + +static const struct iio_trigger_ops bmp580_trigger_ops = { + .set_trigger_state = &bmp580_data_rdy_trigger_set_state, +}; + +static int bmp580_int_pin_config(struct bmp280_data *data) +{ + int pin_drive_cfg = FIELD_PREP(BMP580_INT_CONFIG_OPEN_DRAIN, + data->trig_open_drain); + int pin_level_cfg = FIELD_PREP(BMP580_INT_CONFIG_LEVEL, + data->trig_active_high); + int ret, int_pin_cfg = pin_drive_cfg | pin_level_cfg; + + ret = regmap_update_bits(data->regmap, BMP580_REG_INT_CONFIG, + BMP580_INT_CONFIG_MASK, int_pin_cfg); + if (ret) { + dev_err(data->dev, "Could not set interrupt settings.\n"); + return ret; + } + + ret = regmap_set_bits(data->regmap, BMP580_REG_INT_SOURCE, + BMP580_INT_SOURCE_DRDY); + if (ret) + dev_err(data->dev, "Could not set interrupt source.\n"); + + return ret; +} + +static irqreturn_t bmp580_irq_thread_handler(int irq, void *p) +{ + struct iio_dev *indio_dev = p; + struct bmp280_data *data = iio_priv(indio_dev); + unsigned int int_ctrl; + int ret; + + ret = regmap_read(data->regmap, BMP580_REG_INT_STATUS, &int_ctrl); + if (ret) + return IRQ_NONE; + + if (FIELD_GET(BMP580_INT_STATUS_DRDY_MASK, int_ctrl)) + iio_trigger_poll_nested(data->trig); + + return IRQ_HANDLED; +} + +static int bmp580_trigger_probe(struct iio_dev *indio_dev) +{ + return __bmp280_trigger_probe(indio_dev, &bmp580_trigger_ops, + bmp580_int_pin_config, + bmp580_irq_thread_handler); +} + static irqreturn_t bmp580_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct bmp280_data *data = iio_priv(indio_dev); + struct { + __le32 comp_temp; + __le32 comp_press; + aligned_s64 timestamp; + } buffer; int ret; guard(mutex)(&data->lock); @@ -2202,14 +2629,14 @@ static irqreturn_t bmp580_trigger_handler(int irq, void *p) goto out; } - /* Temperature calculations */ - memcpy(&data->sensor_data[1], &data->buf[0], 3); - /* Pressure calculations */ - memcpy(&data->sensor_data[0], &data->buf[3], 3); + memcpy(&buffer.comp_press, &data->buf[3], 3); + + /* Temperature calculations */ + memcpy(&buffer.comp_temp, &data->buf[0], 3); - iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data, - iio_get_time_ns(indio_dev)); + iio_push_to_buffers_with_ts(indio_dev, &buffer, sizeof(buffer), + iio_get_time_ns(indio_dev)); out: iio_trigger_notify_done(indio_dev->trig); @@ -2228,7 +2655,7 @@ const struct bmp280_chip_info bmp580_chip_info = { .chip_id = bmp580_chip_ids, .num_chip_id = ARRAY_SIZE(bmp580_chip_ids), .regmap_config = &bmp580_regmap_config, - .start_up_time = 2000, + .start_up_time_us = 2000, .channels = bmp580_channels, .num_channels = ARRAY_SIZE(bmp580_channels), .avail_scan_masks = bmp280_avail_scan_masks, @@ -2257,11 +2684,14 @@ const struct bmp280_chip_info bmp580_chip_info = { .chip_config = bmp580_chip_config, .read_temp = bmp580_read_temp, .read_press = bmp580_read_press, + .set_mode = bmp580_set_mode, + .wait_conv = bmp580_wait_conv, .preinit = bmp580_preinit, + .trigger_probe = bmp580_trigger_probe, .trigger_handler = bmp580_trigger_handler, }; -EXPORT_SYMBOL_NS(bmp580_chip_info, IIO_BMP280); +EXPORT_SYMBOL_NS(bmp580_chip_info, "IIO_BMP280"); static int bmp180_wait_for_eoc(struct bmp280_data *data, u8 ctrl_meas) { @@ -2296,7 +2726,7 @@ static int bmp180_wait_for_eoc(struct bmp280_data *data, u8 ctrl_meas) delay_us = conversion_time_max[data->oversampling_press]; - usleep_range(delay_us, delay_us + 1000); + fsleep(delay_us); } ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl); @@ -2504,6 +2934,19 @@ static int bmp180_read_press(struct bmp280_data *data, u32 *comp_press) return 0; } +/* Keep compatibility with newer generations of the sensor */ +static int bmp180_set_mode(struct bmp280_data *data, enum bmp280_op_mode mode) +{ + return 0; +} + +/* Keep compatibility with newer generations of the sensor */ +static int bmp180_wait_conv(struct bmp280_data *data) +{ + return 0; +} + +/* Keep compatibility with newer generations of the sensor */ static int bmp180_chip_config(struct bmp280_data *data) { return 0; @@ -2514,24 +2957,26 @@ static irqreturn_t bmp180_trigger_handler(int irq, void *p) struct iio_poll_func *pf = p; struct iio_dev *indio_dev = pf->indio_dev; struct bmp280_data *data = iio_priv(indio_dev); - int ret, chan_value; + struct { + u32 comp_press; + s32 comp_temp; + aligned_s64 timestamp; + } buffer; + int ret; guard(mutex)(&data->lock); - ret = bmp180_read_temp(data, &chan_value); + ret = bmp180_read_temp(data, &buffer.comp_temp); if (ret) goto out; - data->sensor_data[1] = chan_value; - ret = bmp180_read_press(data, &chan_value); + ret = bmp180_read_press(data, &buffer.comp_press); if (ret) goto out; - data->sensor_data[0] = chan_value; - - iio_push_to_buffers_with_timestamp(indio_dev, &data->sensor_data, - iio_get_time_ns(indio_dev)); + iio_push_to_buffers_with_ts(indio_dev, &buffer, sizeof(buffer), + iio_get_time_ns(indio_dev)); out: iio_trigger_notify_done(indio_dev->trig); @@ -2550,7 +2995,7 @@ const struct bmp280_chip_info bmp180_chip_info = { .chip_id = bmp180_chip_ids, .num_chip_id = ARRAY_SIZE(bmp180_chip_ids), .regmap_config = &bmp180_regmap_config, - .start_up_time = 2000, + .start_up_time_us = 2000, .channels = bmp280_channels, .num_channels = ARRAY_SIZE(bmp280_channels), .avail_scan_masks = bmp280_avail_scan_masks, @@ -2574,10 +3019,12 @@ const struct bmp280_chip_info bmp180_chip_info = { .read_temp = bmp180_read_temp, .read_press = bmp180_read_press, .read_calib = bmp180_read_calib, + .set_mode = bmp180_set_mode, + .wait_conv = bmp180_wait_conv, .trigger_handler = bmp180_trigger_handler, }; -EXPORT_SYMBOL_NS(bmp180_chip_info, IIO_BMP280); +EXPORT_SYMBOL_NS(bmp180_chip_info, "IIO_BMP280"); static irqreturn_t bmp085_eoc_irq(int irq, void *d) { @@ -2588,15 +3035,18 @@ static irqreturn_t bmp085_eoc_irq(int irq, void *d) return IRQ_HANDLED; } -static int bmp085_fetch_eoc_irq(struct device *dev, - const char *name, - int irq, - struct bmp280_data *data) +static int bmp085_trigger_probe(struct iio_dev *indio_dev) { + struct bmp280_data *data = iio_priv(indio_dev); + struct device *dev = data->dev; unsigned long irq_trig; - int ret; + int ret, irq; - irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + irq = fwnode_irq_get(dev_fwnode(dev), 0); + if (irq < 0) + return dev_err_probe(dev, irq, "No interrupt found.\n"); + + irq_trig = irq_get_trigger_type(irq); if (irq_trig != IRQF_TRIGGER_RISING) { dev_err(dev, "non-rising trigger given for EOC interrupt, trying to enforce it\n"); irq_trig = IRQF_TRIGGER_RISING; @@ -2604,13 +3054,8 @@ static int bmp085_fetch_eoc_irq(struct device *dev, init_completion(&data->done); - ret = devm_request_threaded_irq(dev, - irq, - bmp085_eoc_irq, - NULL, - irq_trig, - name, - data); + ret = devm_request_irq(dev, irq, bmp085_eoc_irq, irq_trig, + indio_dev->name, data); if (ret) { /* Bail out without IRQ but keep the driver in place */ dev_err(dev, "unable to request DRDY IRQ\n"); @@ -2618,14 +3063,54 @@ static int bmp085_fetch_eoc_irq(struct device *dev, } data->use_eoc = true; + return 0; } +/* Identical to bmp180_chip_info + bmp085_trigger_probe */ +const struct bmp280_chip_info bmp085_chip_info = { + .id_reg = BMP280_REG_ID, + .chip_id = bmp180_chip_ids, + .num_chip_id = ARRAY_SIZE(bmp180_chip_ids), + .regmap_config = &bmp180_regmap_config, + .start_up_time_us = 2000, + .channels = bmp280_channels, + .num_channels = ARRAY_SIZE(bmp280_channels), + .avail_scan_masks = bmp280_avail_scan_masks, + + .oversampling_temp_avail = bmp180_oversampling_temp_avail, + .num_oversampling_temp_avail = + ARRAY_SIZE(bmp180_oversampling_temp_avail), + .oversampling_temp_default = 0, + + .oversampling_press_avail = bmp180_oversampling_press_avail, + .num_oversampling_press_avail = + ARRAY_SIZE(bmp180_oversampling_press_avail), + .oversampling_press_default = BMP180_MEAS_PRESS_8X, + + .temp_coeffs = bmp180_temp_coeffs, + .temp_coeffs_type = IIO_VAL_FRACTIONAL, + .press_coeffs = bmp180_press_coeffs, + .press_coeffs_type = IIO_VAL_FRACTIONAL, + + .chip_config = bmp180_chip_config, + .read_temp = bmp180_read_temp, + .read_press = bmp180_read_press, + .read_calib = bmp180_read_calib, + .set_mode = bmp180_set_mode, + .wait_conv = bmp180_wait_conv, + + .trigger_probe = bmp085_trigger_probe, + .trigger_handler = bmp180_trigger_handler, +}; +EXPORT_SYMBOL_NS(bmp085_chip_info, "IIO_BMP280"); + static int bmp280_buffer_preenable(struct iio_dev *indio_dev) { struct bmp280_data *data = iio_priv(indio_dev); pm_runtime_get_sync(data->dev); + data->chip_info->set_mode(data, BMP280_NORMAL); return 0; } @@ -2634,7 +3119,6 @@ static int bmp280_buffer_postdisable(struct iio_dev *indio_dev) { struct bmp280_data *data = iio_priv(indio_dev); - pm_runtime_mark_last_busy(data->dev); pm_runtime_put_autosuspend(data->dev); return 0; @@ -2697,7 +3181,7 @@ int bmp280_common_probe(struct device *dev, data->oversampling_temp = chip_info->oversampling_temp_default; data->iir_filter_coeff = chip_info->iir_filter_coeff_default; data->sampling_freq = chip_info->sampling_freq_default; - data->start_up_time = chip_info->start_up_time; + data->start_up_time_us = chip_info->start_up_time_us; /* Bring up regulators */ regulator_bulk_set_supply_names(data->supplies, @@ -2723,15 +3207,15 @@ int bmp280_common_probe(struct device *dev, return ret; /* Wait to make sure we started up properly */ - usleep_range(data->start_up_time, data->start_up_time + 100); + fsleep(data->start_up_time_us); /* Bring chip out of reset if there is an assigned GPIO line */ gpiod = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR(gpiod)) + return dev_err_probe(dev, PTR_ERR(gpiod), "failed to get reset GPIO\n"); + /* Deassert the signal */ - if (gpiod) { - dev_info(dev, "release reset\n"); - gpiod_set_value(gpiod, 0); - } + gpiod_set_value_cansleep(gpiod, 0); data->regmap = regmap; @@ -2790,12 +3274,17 @@ int bmp280_common_probe(struct device *dev, * however as it happens, the BMP085 shares the chip ID of BMP180 * so we look for an IRQ if we have that. */ - if (irq > 0 && (chip_id == BMP180_CHIP_ID)) { - ret = bmp085_fetch_eoc_irq(dev, name, irq, data); + if (irq > 0) { + if (data->chip_info->trigger_probe) + ret = data->chip_info->trigger_probe(indio_dev); if (ret) return ret; } + ret = data->chip_info->set_mode(data, BMP280_SLEEP); + if (ret) + return dev_err_probe(dev, ret, "Failed to set sleep mode\n"); + /* Enable runtime PM */ pm_runtime_get_noresume(dev); pm_runtime_set_active(dev); @@ -2804,7 +3293,7 @@ int bmp280_common_probe(struct device *dev, * Set autosuspend to two orders of magnitude larger than the * start-up time. */ - pm_runtime_set_autosuspend_delay(dev, data->start_up_time / 10); + pm_runtime_set_autosuspend_delay(dev, data->start_up_time_us / 10); pm_runtime_use_autosuspend(dev); pm_runtime_put(dev); @@ -2814,13 +3303,16 @@ int bmp280_common_probe(struct device *dev, return devm_iio_device_register(dev, indio_dev); } -EXPORT_SYMBOL_NS(bmp280_common_probe, IIO_BMP280); +EXPORT_SYMBOL_NS(bmp280_common_probe, "IIO_BMP280"); static int bmp280_runtime_suspend(struct device *dev) { struct iio_dev *indio_dev = dev_get_drvdata(dev); struct bmp280_data *data = iio_priv(indio_dev); + data->chip_info->set_mode(data, BMP280_SLEEP); + + fsleep(data->start_up_time_us); return regulator_bulk_disable(BMP280_NUM_SUPPLIES, data->supplies); } @@ -2834,8 +3326,13 @@ static int bmp280_runtime_resume(struct device *dev) if (ret) return ret; - usleep_range(data->start_up_time, data->start_up_time + 100); - return data->chip_info->chip_config(data); + fsleep(data->start_up_time_us); + + ret = data->chip_info->chip_config(data); + if (ret) + return ret; + + return data->chip_info->set_mode(data, data->op_mode); } EXPORT_RUNTIME_DEV_PM_OPS(bmp280_dev_pm_ops, bmp280_runtime_suspend, |