diff options
Diffstat (limited to 'drivers/iio/pressure/bmp280.h')
| -rw-r--r-- | drivers/iio/pressure/bmp280.h | 149 |
1 files changed, 110 insertions, 39 deletions
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index 4012387d7956..25bb9c743a05 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -1,10 +1,10 @@ /* SPDX-License-Identifier: GPL-2.0 */ #include <linux/bitops.h> #include <linux/device.h> -#include <linux/iio/iio.h> #include <linux/regmap.h> #include <linux/regulator/consumer.h> +#include <linux/iio/iio.h> /* BMP580 specific registers */ #define BMP580_REG_CMD 0x7E @@ -55,8 +55,17 @@ #define BMP580_CMD_NVM_WRITE_SEQ_1 0xA0 #define BMP580_CMD_SOFT_RESET 0xB6 +#define BMP580_INT_STATUS_DRDY_MASK BIT(0) #define BMP580_INT_STATUS_POR_MASK BIT(4) +#define BMP580_INT_SOURCE_DRDY BIT(0) + +#define BMP580_INT_CONFIG_MASK GENMASK(3, 0) +#define BMP580_INT_CONFIG_LATCH BIT(0) +#define BMP580_INT_CONFIG_LEVEL BIT(1) +#define BMP580_INT_CONFIG_OPEN_DRAIN BIT(2) +#define BMP580_INT_CONFIG_INT_EN BIT(3) + #define BMP580_STATUS_CORE_RDY_MASK BIT(0) #define BMP580_STATUS_NVM_RDY_MASK BIT(1) #define BMP580_STATUS_NVM_ERR_MASK BIT(2) @@ -170,6 +179,19 @@ #define BMP380_MODE_FORCED 1 #define BMP380_MODE_NORMAL 3 +#define BMP380_MEAS_OFFSET 234 +#define BMP380_MEAS_DUR 2020 +#define BMP380_TEMP_MEAS_OFFSET 163 +#define BMP380_PRESS_MEAS_OFFSET 392 + +#define BMP380_INT_STATUS_DRDY BIT(3) + +#define BMP380_INT_CTRL_SETTINGS_MASK GENMASK(2, 0) +#define BMP380_INT_CTRL_OPEN_DRAIN BIT(0) +#define BMP380_INT_CTRL_LEVEL BIT(1) +#define BMP380_INT_CTRL_LATCH BIT(2) +#define BMP380_INT_CTRL_DRDY_EN BIT(6) + #define BMP380_MIN_TEMP -4000 #define BMP380_MAX_TEMP 8500 #define BMP380_MIN_PRES 3000000 @@ -192,8 +214,6 @@ #define BMP380_PRESS_SKIPPED 0x800000 /* BMP280 specific registers */ -#define BMP280_REG_HUMIDITY_LSB 0xFE -#define BMP280_REG_HUMIDITY_MSB 0xFD #define BMP280_REG_TEMP_XLSB 0xFC #define BMP280_REG_TEMP_LSB 0xFB #define BMP280_REG_TEMP_MSB 0xFA @@ -207,15 +227,10 @@ #define BMP280_REG_CONFIG 0xF5 #define BMP280_REG_CTRL_MEAS 0xF4 #define BMP280_REG_STATUS 0xF3 -#define BMP280_REG_CTRL_HUMIDITY 0xF2 - -/* Due to non linear mapping, and data sizes we can't do a bulk read */ -#define BMP280_REG_COMP_H1 0xA1 -#define BMP280_REG_COMP_H2 0xE1 -#define BMP280_REG_COMP_H3 0xE3 -#define BMP280_REG_COMP_H4 0xE4 -#define BMP280_REG_COMP_H5 0xE5 -#define BMP280_REG_COMP_H6 0xE7 +#define BMP280_REG_STATUS_IM_UPDATE BIT(0) +#define BMP280_REG_STATUS_MEAS_BIT BIT(3) +#define BMP280_REG_RESET 0xE0 +#define BMP280_RST_SOFT_CMD 0xB6 #define BMP280_REG_COMP_TEMP_START 0x88 #define BMP280_COMP_TEMP_REG_COUNT 6 @@ -223,8 +238,6 @@ #define BMP280_REG_COMP_PRESS_START 0x8E #define BMP280_COMP_PRESS_REG_COUNT 18 -#define BMP280_COMP_H5_MASK GENMASK(15, 4) - #define BMP280_CONTIGUOUS_CALIB_REGS (BMP280_COMP_TEMP_REG_COUNT + \ BMP280_COMP_PRESS_REG_COUNT) @@ -235,14 +248,6 @@ #define BMP280_FILTER_8X 3 #define BMP280_FILTER_16X 4 -#define BMP280_OSRS_HUMIDITY_MASK GENMASK(2, 0) -#define BMP280_OSRS_HUMIDITY_SKIP 0 -#define BMP280_OSRS_HUMIDITY_1X 1 -#define BMP280_OSRS_HUMIDITY_2X 2 -#define BMP280_OSRS_HUMIDITY_4X 3 -#define BMP280_OSRS_HUMIDITY_8X 4 -#define BMP280_OSRS_HUMIDITY_16X 5 - #define BMP280_OSRS_TEMP_MASK GENMASK(7, 5) #define BMP280_OSRS_TEMP_SKIP 0 #define BMP280_OSRS_TEMP_1X 1 @@ -264,6 +269,39 @@ #define BMP280_MODE_FORCED 1 #define BMP280_MODE_NORMAL 3 +#define BMP280_MEAS_OFFSET 1250 +#define BMP280_MEAS_DUR 2300 +#define BMP280_PRESS_HUMID_MEAS_OFFSET 575 + +/* BME280 specific registers */ +#define BME280_REG_HUMIDITY_LSB 0xFE +#define BME280_REG_HUMIDITY_MSB 0xFD + +#define BME280_REG_CTRL_HUMIDITY 0xF2 + +/* Due to non linear mapping, and data sizes we can't do a bulk read */ +#define BME280_REG_COMP_H1 0xA1 +#define BME280_REG_COMP_H2 0xE1 +#define BME280_REG_COMP_H3 0xE3 +#define BME280_REG_COMP_H4 0xE4 +#define BME280_REG_COMP_H5 0xE5 +#define BME280_REG_COMP_H6 0xE7 + +#define BME280_COMP_H4_GET_MASK_UP GENMASK(15, 8) +#define BME280_COMP_H4_PREP_MASK_UP GENMASK(11, 4) +#define BME280_COMP_H4_MASK_LOW GENMASK(3, 0) +#define BME280_COMP_H5_MASK GENMASK(15, 4) + +#define BME280_CONTIGUOUS_CALIB_REGS 7 + +#define BME280_OSRS_HUMIDITY_MASK GENMASK(2, 0) +#define BME280_OSRS_HUMIDITY_SKIP 0 +#define BME280_OSRS_HUMIDITY_1X 1 +#define BME280_OSRS_HUMIDITY_2X 2 +#define BME280_OSRS_HUMIDITY_4X 3 +#define BME280_OSRS_HUMIDITY_8X 4 +#define BME280_OSRS_HUMIDITY_16X 5 + /* BMP180 specific registers */ #define BMP180_REG_OUT_XLSB 0xF8 #define BMP180_REG_OUT_LSB 0xF7 @@ -301,6 +339,16 @@ #define BMP280_PRESS_SKIPPED 0x80000 #define BMP280_HUMIDITY_SKIPPED 0x8000 +/* Number of bytes for each value */ +#define BMP280_NUM_PRESS_BYTES 3 +#define BMP280_NUM_TEMP_BYTES 3 +#define BME280_NUM_HUMIDITY_BYTES 2 +#define BMP280_BURST_READ_BYTES (BMP280_NUM_PRESS_BYTES + \ + BMP280_NUM_TEMP_BYTES) +#define BME280_BURST_READ_BYTES (BMP280_NUM_PRESS_BYTES + \ + BMP280_NUM_TEMP_BYTES + \ + BME280_NUM_HUMIDITY_BYTES) + /* Core exported structs */ static const char *const bmp280_supply_names[] = { @@ -363,12 +411,21 @@ struct bmp380_calib { s8 P11; }; +enum bmp280_op_mode { + BMP280_SLEEP, + BMP280_FORCED, + BMP280_NORMAL, +}; + struct bmp280_data { struct device *dev; struct mutex lock; struct regmap *regmap; struct completion done; bool use_eoc; + bool trig_open_drain; + bool trig_active_high; + struct iio_trigger *trig; const struct bmp280_chip_info *chip_info; union { struct bmp180_calib bmp180; @@ -376,7 +433,7 @@ struct bmp280_data { struct bmp380_calib bmp380; } calib; struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES]; - unsigned int start_up_time; /* in microseconds */ + unsigned int start_up_time_us; /* log of base 2 of oversampling rate */ u8 oversampling_press; @@ -394,11 +451,8 @@ struct bmp280_data { */ int sampling_freq; - /* - * Carryover value from temperature conversion, used in pressure - * calculation. - */ - s32 t_fine; + /* Value to hold the current operation mode of the device */ + enum bmp280_op_mode op_mode; /* * DMA (thus cache coherency maintenance) may require the @@ -406,10 +460,11 @@ struct bmp280_data { */ union { /* Sensor data buffer */ - u8 buf[3]; + u8 buf[BME280_BURST_READ_BYTES]; /* Calibration data buffers */ - __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; - __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; + __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / sizeof(__le16)]; + __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / sizeof(__be16)]; + u8 bme280_humid_cal_buf[BME280_CONTIGUOUS_CALIB_REGS]; u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT]; /* Miscellaneous, endianness-aware data buffers */ __le16 le16; @@ -423,10 +478,12 @@ struct bmp280_chip_info { int num_chip_id; const struct regmap_config *regmap_config; + bool spi_read_extra_byte; const struct iio_chan_spec *channels; int num_channels; - unsigned int start_up_time; + unsigned int start_up_time_us; + const unsigned long *avail_scan_masks; const int *oversampling_temp_avail; int num_oversampling_temp_avail; @@ -448,15 +505,28 @@ struct bmp280_chip_info { int num_sampling_freq_avail; int sampling_freq_default; - int (*chip_config)(struct bmp280_data *); - int (*read_temp)(struct bmp280_data *, int *, int *); - int (*read_press)(struct bmp280_data *, int *, int *); - int (*read_humid)(struct bmp280_data *, int *, int *); - int (*read_calib)(struct bmp280_data *); - int (*preinit)(struct bmp280_data *); + const int *temp_coeffs; + const int temp_coeffs_type; + const int *press_coeffs; + const int press_coeffs_type; + const int *humid_coeffs; + const int humid_coeffs_type; + + int (*chip_config)(struct bmp280_data *data); + int (*read_temp)(struct bmp280_data *data, s32 *adc_temp); + int (*read_press)(struct bmp280_data *data, u32 *adc_press); + int (*read_humid)(struct bmp280_data *data, u32 *adc_humidity); + int (*read_calib)(struct bmp280_data *data); + int (*preinit)(struct bmp280_data *data); + int (*set_mode)(struct bmp280_data *data, enum bmp280_op_mode mode); + int (*wait_conv)(struct bmp280_data *data); + + int (*trigger_probe)(struct iio_dev *indio_dev); + irqreturn_t (*trigger_handler)(int irq, void *p); }; /* Chip infos for each variant */ +extern const struct bmp280_chip_info bmp085_chip_info; extern const struct bmp280_chip_info bmp180_chip_info; extern const struct bmp280_chip_info bmp280_chip_info; extern const struct bmp280_chip_info bme280_chip_info; @@ -466,13 +536,14 @@ extern const struct bmp280_chip_info bmp580_chip_info; /* Regmap configurations */ extern const struct regmap_config bmp180_regmap_config; extern const struct regmap_config bmp280_regmap_config; +extern const struct regmap_config bme280_regmap_config; extern const struct regmap_config bmp380_regmap_config; extern const struct regmap_config bmp580_regmap_config; /* Probe called from different transports */ int bmp280_common_probe(struct device *dev, struct regmap *regmap, - const struct bmp280_chip_info *, + const struct bmp280_chip_info *chip_info, const char *name, int irq); |