diff options
Diffstat (limited to 'drivers/iio/pressure/bmp280.h')
| -rw-r--r-- | drivers/iio/pressure/bmp280.h | 64 |
1 files changed, 55 insertions, 9 deletions
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index ccacc67c1473..25bb9c743a05 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -55,8 +55,17 @@ #define BMP580_CMD_NVM_WRITE_SEQ_1 0xA0 #define BMP580_CMD_SOFT_RESET 0xB6 +#define BMP580_INT_STATUS_DRDY_MASK BIT(0) #define BMP580_INT_STATUS_POR_MASK BIT(4) +#define BMP580_INT_SOURCE_DRDY BIT(0) + +#define BMP580_INT_CONFIG_MASK GENMASK(3, 0) +#define BMP580_INT_CONFIG_LATCH BIT(0) +#define BMP580_INT_CONFIG_LEVEL BIT(1) +#define BMP580_INT_CONFIG_OPEN_DRAIN BIT(2) +#define BMP580_INT_CONFIG_INT_EN BIT(3) + #define BMP580_STATUS_CORE_RDY_MASK BIT(0) #define BMP580_STATUS_NVM_RDY_MASK BIT(1) #define BMP580_STATUS_NVM_ERR_MASK BIT(2) @@ -170,6 +179,19 @@ #define BMP380_MODE_FORCED 1 #define BMP380_MODE_NORMAL 3 +#define BMP380_MEAS_OFFSET 234 +#define BMP380_MEAS_DUR 2020 +#define BMP380_TEMP_MEAS_OFFSET 163 +#define BMP380_PRESS_MEAS_OFFSET 392 + +#define BMP380_INT_STATUS_DRDY BIT(3) + +#define BMP380_INT_CTRL_SETTINGS_MASK GENMASK(2, 0) +#define BMP380_INT_CTRL_OPEN_DRAIN BIT(0) +#define BMP380_INT_CTRL_LEVEL BIT(1) +#define BMP380_INT_CTRL_LATCH BIT(2) +#define BMP380_INT_CTRL_DRDY_EN BIT(6) + #define BMP380_MIN_TEMP -4000 #define BMP380_MAX_TEMP 8500 #define BMP380_MIN_PRES 3000000 @@ -205,6 +227,10 @@ #define BMP280_REG_CONFIG 0xF5 #define BMP280_REG_CTRL_MEAS 0xF4 #define BMP280_REG_STATUS 0xF3 +#define BMP280_REG_STATUS_IM_UPDATE BIT(0) +#define BMP280_REG_STATUS_MEAS_BIT BIT(3) +#define BMP280_REG_RESET 0xE0 +#define BMP280_RST_SOFT_CMD 0xB6 #define BMP280_REG_COMP_TEMP_START 0x88 #define BMP280_COMP_TEMP_REG_COUNT 6 @@ -243,6 +269,10 @@ #define BMP280_MODE_FORCED 1 #define BMP280_MODE_NORMAL 3 +#define BMP280_MEAS_OFFSET 1250 +#define BMP280_MEAS_DUR 2300 +#define BMP280_PRESS_HUMID_MEAS_OFFSET 575 + /* BME280 specific registers */ #define BME280_REG_HUMIDITY_LSB 0xFE #define BME280_REG_HUMIDITY_MSB 0xFD @@ -257,8 +287,13 @@ #define BME280_REG_COMP_H5 0xE5 #define BME280_REG_COMP_H6 0xE7 +#define BME280_COMP_H4_GET_MASK_UP GENMASK(15, 8) +#define BME280_COMP_H4_PREP_MASK_UP GENMASK(11, 4) +#define BME280_COMP_H4_MASK_LOW GENMASK(3, 0) #define BME280_COMP_H5_MASK GENMASK(15, 4) +#define BME280_CONTIGUOUS_CALIB_REGS 7 + #define BME280_OSRS_HUMIDITY_MASK GENMASK(2, 0) #define BME280_OSRS_HUMIDITY_SKIP 0 #define BME280_OSRS_HUMIDITY_1X 1 @@ -376,12 +411,21 @@ struct bmp380_calib { s8 P11; }; +enum bmp280_op_mode { + BMP280_SLEEP, + BMP280_FORCED, + BMP280_NORMAL, +}; + struct bmp280_data { struct device *dev; struct mutex lock; struct regmap *regmap; struct completion done; bool use_eoc; + bool trig_open_drain; + bool trig_active_high; + struct iio_trigger *trig; const struct bmp280_chip_info *chip_info; union { struct bmp180_calib bmp180; @@ -389,7 +433,7 @@ struct bmp280_data { struct bmp380_calib bmp380; } calib; struct regulator_bulk_data supplies[BMP280_NUM_SUPPLIES]; - unsigned int start_up_time; /* in microseconds */ + unsigned int start_up_time_us; /* log of base 2 of oversampling rate */ u8 oversampling_press; @@ -407,11 +451,8 @@ struct bmp280_data { */ int sampling_freq; - /* - * Data to push to userspace triggered buffer. Up to 3 channels and - * s64 timestamp, aligned. - */ - s32 sensor_data[6] __aligned(8); + /* Value to hold the current operation mode of the device */ + enum bmp280_op_mode op_mode; /* * DMA (thus cache coherency maintenance) may require the @@ -421,8 +462,9 @@ struct bmp280_data { /* Sensor data buffer */ u8 buf[BME280_BURST_READ_BYTES]; /* Calibration data buffers */ - __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; - __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; + __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / sizeof(__le16)]; + __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / sizeof(__be16)]; + u8 bme280_humid_cal_buf[BME280_CONTIGUOUS_CALIB_REGS]; u8 bmp380_cal_buf[BMP380_CALIB_REG_COUNT]; /* Miscellaneous, endianness-aware data buffers */ __le16 le16; @@ -440,7 +482,7 @@ struct bmp280_chip_info { const struct iio_chan_spec *channels; int num_channels; - unsigned int start_up_time; + unsigned int start_up_time_us; const unsigned long *avail_scan_masks; const int *oversampling_temp_avail; @@ -476,11 +518,15 @@ struct bmp280_chip_info { int (*read_humid)(struct bmp280_data *data, u32 *adc_humidity); int (*read_calib)(struct bmp280_data *data); int (*preinit)(struct bmp280_data *data); + int (*set_mode)(struct bmp280_data *data, enum bmp280_op_mode mode); + int (*wait_conv)(struct bmp280_data *data); + int (*trigger_probe)(struct iio_dev *indio_dev); irqreturn_t (*trigger_handler)(int irq, void *p); }; /* Chip infos for each variant */ +extern const struct bmp280_chip_info bmp085_chip_info; extern const struct bmp280_chip_info bmp180_chip_info; extern const struct bmp280_chip_info bmp280_chip_info; extern const struct bmp280_chip_info bme280_chip_info; |