diff options
Diffstat (limited to 'drivers/input/keyboard/Kconfig')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 142 |
1 files changed, 68 insertions, 74 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 0c607da9ee10..2ff4fef322c2 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -37,25 +37,29 @@ config KEYBOARD_ADP5520 To compile this driver as a module, choose M here: the module will be called adp5520-keys. -config KEYBOARD_ADP5588 - tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander" - depends on I2C +config KEYBOARD_ADP5585 + tristate "ADP558x keypad support" + depends on MFD_ADP5585 + select INPUT_MATRIXKMAP help - Say Y here if you want to use a ADP5588/87 attached to your - system I2C bus. + This option enables support for the KEYPAD function found in the Analog + Devices ADP5585 and similar devices. To compile this driver as a module, choose M here: the - module will be called adp5588-keys. + module will be called adp5585-keys. -config KEYBOARD_ADP5589 - tristate "ADP5585/ADP5589 I2C QWERTY Keypad and IO Expander" +config KEYBOARD_ADP5588 + tristate "ADP5588/87 I2C QWERTY Keypad and IO Expander" depends on I2C + select GPIOLIB + select GPIOLIB_IRQCHIP + select INPUT_MATRIXKMAP help - Say Y here if you want to use a ADP5585/ADP5589 attached to your + Say Y here if you want to use a ADP5588/87 attached to your system I2C bus. To compile this driver as a module, choose M here: the - module will be called adp5589-keys. + module will be called adp5588-keys. config KEYBOARD_AMIGA tristate "Amiga keyboard" @@ -103,6 +107,7 @@ config KEYBOARD_ATKBD select SERIO_LIBPS2 select SERIO_I8042 if ARCH_MIGHT_HAVE_PC_SERIO select SERIO_GSCPS2 if GSC + select INPUT_VIVALDIFMAP help Say Y here if you want to use a standard AT or PS/2 keyboard. Usually you'll need this, unless you have a different type keyboard (USB, ADB @@ -185,7 +190,7 @@ config KEYBOARD_QT2160 config KEYBOARD_CLPS711X tristate "CLPS711X Keypad support" - depends on OF_GPIO && (ARCH_CLPS711X || COMPILE_TEST) + depends on ARCH_CLPS711X || COMPILE_TEST select INPUT_MATRIXKMAP help Say Y here to enable the matrix keypad on the Cirrus Logic @@ -257,24 +262,6 @@ config KEYBOARD_GPIO_POLLED To compile this driver as a module, choose M here: the module will be called gpio_keys_polled. -config KEYBOARD_TCA6416 - tristate "TCA6416/TCA6408A Keypad Support" - depends on I2C - help - This driver implements basic keypad functionality - for keys connected through TCA6416/TCA6408A IO expanders. - - Say Y here if your device has keys connected to - TCA6416/TCA6408A IO expander. Your board-specific setup logic - must also provide pin-mask details(of which TCA6416 pins - are used for keypad). - - If enabled the entire TCA6416 device will be managed through - this driver. - - To compile this driver as a module, choose M here: the - module will be called tca6416_keypad. - config KEYBOARD_TCA8418 tristate "TCA8418 Keypad Support" depends on I2C @@ -386,7 +373,7 @@ config KEYBOARD_LOCOMO config KEYBOARD_LPC32XX tristate "LPC32XX matrix key scanner support" - depends on ARCH_LPC32XX && OF + depends on (ARCH_LPC32XX && OF) || COMPILE_TEST select INPUT_MATRIXKMAP help Say Y here if you want to use NXP LPC32XX SoC key scanner interface, @@ -417,17 +404,17 @@ config KEYBOARD_MAX7359 To compile this driver as a module, choose M here: the module will be called max7359_keypad. -config KEYBOARD_MCS - tristate "MELFAS MCS Touchkey" +config KEYBOARD_MAX7360 + tristate "Maxim MAX7360 Key Switch Controller" + select INPUT_MATRIXKMAP depends on I2C + depends on MFD_MAX7360 help - Say Y here if you have the MELFAS MCS5000/5080 touchkey controller - chip in your system. + If you say yes here you get support for the keypad controller on the + Maxim MAX7360 I/O Expander. - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called mcs_touchkey. + To compile this driver as a module, choose M here: the module will be + called max7360_keypad. config KEYBOARD_MPR121 tristate "Freescale MPR121 Touchkey" @@ -462,6 +449,17 @@ config KEYBOARD_IMX To compile this driver as a module, choose M here: the module will be called imx_keypad. +config KEYBOARD_IMX_BBM_SCMI + tristate "IMX BBM SCMI Key Driver" + depends on IMX_SCMI_BBM_EXT || COMPILE_TEST + default y if ARCH_MXC + help + This is the BBM key driver for NXP i.MX SoCs managed through + SCMI protocol. + + To compile this driver as a module, choose M here: the + module will be called scmi-imx-bbm-key. + config KEYBOARD_IMX_SC_KEY tristate "IMX SCU Key Driver" depends on IMX_SCU @@ -481,17 +479,6 @@ config KEYBOARD_NEWTON To compile this driver as a module, choose M here: the module will be called newtonkbd. -config KEYBOARD_NOMADIK - tristate "ST-Ericsson Nomadik SKE keyboard" - depends on (ARCH_NOMADIK || ARCH_U8500) - select INPUT_MATRIXKMAP - help - Say Y here if you want to use a keypad provided on the SKE controller - used on the Ux500 and Nomadik platforms - - To compile this driver as a module, choose M here: the - module will be called nmk-ske-keypad. - config KEYBOARD_NSPIRE tristate "TI-NSPIRE built-in keyboard" depends on ARCH_NSPIRE && OF @@ -504,7 +491,7 @@ config KEYBOARD_NSPIRE config KEYBOARD_TEGRA tristate "NVIDIA Tegra internal matrix keyboard controller support" - depends on ARCH_TEGRA && OF + depends on (ARCH_TEGRA && OF) || COMPILE_TEST select INPUT_MATRIXKMAP help Say Y here if you want to use a matrix keyboard connected directly @@ -523,9 +510,22 @@ config KEYBOARD_OPENCORES To compile this driver as a module, choose M here; the module will be called opencores-kbd. +config KEYBOARD_PINEPHONE + tristate "Pine64 PinePhone Keyboard" + depends on I2C && REGULATOR + select CRC8 + select INPUT_MATRIXKMAP + help + Say Y here to enable support for the keyboard in the Pine64 PinePhone + keyboard case. This driver supports the FLOSS firmware available at + https://megous.com/git/pinephone-keyboard/ + + To compile this driver as a module, choose M here; the + module will be called pinephone-keyboard. + config KEYBOARD_PXA27x tristate "PXA27x/PXA3xx keypad support" - depends on PXA27x || PXA3xx || ARCH_MMP + depends on PXA27x || PXA3xx || ARCH_MMP || COMPILE_TEST select INPUT_MATRIXKMAP help Enable support for PXA27x/PXA3xx keypad controller. @@ -533,15 +533,6 @@ config KEYBOARD_PXA27x To compile this driver as a module, choose M here: the module will be called pxa27x_keypad. -config KEYBOARD_PXA930_ROTARY - tristate "PXA930/PXA935 Enhanced Rotary Controller Support" - depends on CPU_PXA930 || CPU_PXA935 - help - Enable support for PXA930/PXA935 Enhanced Rotary Controller. - - To compile this driver as a module, choose M here: the - module will be called pxa930_rotary. - config KEYBOARD_PMIC8XXX tristate "Qualcomm PMIC8XXX keypad support" depends on MFD_PM8XXX @@ -549,14 +540,14 @@ config KEYBOARD_PMIC8XXX help Say Y here if you want to enable the driver for the PMIC8XXX keypad provided as a reference design from Qualcomm. This is intended - to support upto 18x8 matrix based keypad design. + to support up to 18x8 matrix-based keypad design. To compile this driver as a module, choose M here: the module will be called pmic8xxx-keypad. config KEYBOARD_SAMSUNG tristate "Samsung keypad support" - depends on HAVE_CLK + depends on HAS_IOMEM && HAVE_CLK select INPUT_MATRIXKMAP help Say Y here if you want to use the keypad on your Samsung mobile @@ -640,16 +631,6 @@ config KEYBOARD_SUN4I_LRADC To compile this driver as a module, choose M here: the module will be called sun4i-lradc-keys. -config KEYBOARD_DAVINCI - tristate "TI DaVinci Key Scan" - depends on ARCH_DAVINCI_DM365 - help - Say Y to enable keypad module support for the TI DaVinci - platforms (DM365). - - To compile this driver as a module, choose M here: the - module will be called davinci_keyscan. - config KEYBOARD_IPAQ_MICRO tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)" depends on MFD_IPAQ_MICRO @@ -692,7 +673,7 @@ config KEYBOARD_OMAP4 config KEYBOARD_SPEAR tristate "ST SPEAR keyboard support" - depends on PLAT_SPEAR + depends on PLAT_SPEAR || COMPILE_TEST select INPUT_MATRIXKMAP help Say Y here if you want to use the SPEAR keyboard. @@ -749,6 +730,7 @@ config KEYBOARD_XTKBD config KEYBOARD_CROS_EC tristate "ChromeOS EC keyboard" select INPUT_MATRIXKMAP + select INPUT_VIVALDIFMAP depends on CROS_EC help Say Y here to enable the matrix keyboard used by ChromeOS devices @@ -779,9 +761,21 @@ config KEYBOARD_BCM To compile this driver as a module, choose M here: the module will be called bcm-keypad. +config KEYBOARD_MT6779 + tristate "MediaTek Keypad Support" + depends on ARCH_MEDIATEK || COMPILE_TEST + select REGMAP_MMIO + select INPUT_MATRIXKMAP + help + Say Y here if you want to use the keypad on MediaTek SoCs. + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mt6779-keypad. + config KEYBOARD_MTK_PMIC tristate "MediaTek PMIC keys support" - depends on MFD_MT6397 + depends on MFD_MT6397 || COMPILE_TEST help Say Y here if you want to use the pmic keys (powerkey/homekey). |