summaryrefslogtreecommitdiff
path: root/drivers/input/keyboard/cap11xx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/input/keyboard/cap11xx.c')
-rw-r--r--drivers/input/keyboard/cap11xx.c389
1 files changed, 276 insertions, 113 deletions
diff --git a/drivers/input/keyboard/cap11xx.c b/drivers/input/keyboard/cap11xx.c
index 1a1eacae3ea1..0c17cbaa3d27 100644
--- a/drivers/input/keyboard/cap11xx.c
+++ b/drivers/input/keyboard/cap11xx.c
@@ -1,11 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-only
/*
* Input driver for Microchip CAP11xx based capacitive touch sensors
*
* (c) 2014 Daniel Mack <linux@zonque.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
*/
#include <linux/kernel.h>
@@ -13,10 +10,11 @@
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/leds.h>
-#include <linux/of_irq.h>
+#include <linux/of.h>
#include <linux/regmap.h>
#include <linux/i2c.h>
#include <linux/gpio/consumer.h>
+#include <linux/bitfield.h>
#define CAP11XX_REG_MAIN_CONTROL 0x00
#define CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT (6)
@@ -27,6 +25,7 @@
#define CAP11XX_REG_NOISE_FLAG_STATUS 0x0a
#define CAP11XX_REG_SENOR_DELTA(X) (0x10 + (X))
#define CAP11XX_REG_SENSITIVITY_CONTROL 0x1f
+#define CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK 0x70
#define CAP11XX_REG_CONFIG 0x20
#define CAP11XX_REG_SENSOR_ENABLE 0x21
#define CAP11XX_REG_SENSOR_CONFIG 0x22
@@ -35,6 +34,7 @@
#define CAP11XX_REG_CALIBRATION 0x26
#define CAP11XX_REG_INT_ENABLE 0x27
#define CAP11XX_REG_REPEAT_RATE 0x28
+#define CAP11XX_REG_SIGNAL_GUARD_ENABLE 0x29
#define CAP11XX_REG_MT_CONFIG 0x2a
#define CAP11XX_REG_MT_PATTERN_CONFIG 0x2b
#define CAP11XX_REG_MT_PATTERN 0x2d
@@ -50,6 +50,8 @@
#define CAP11XX_REG_SENSOR_BASE_CNT(X) (0x50 + (X))
#define CAP11XX_REG_LED_POLARITY 0x73
#define CAP11XX_REG_LED_OUTPUT_CONTROL 0x74
+#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG 0x80
+#define CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2 0x81
#define CAP11XX_REG_LED_DUTY_CYCLE_1 0x90
#define CAP11XX_REG_LED_DUTY_CYCLE_2 0x91
@@ -75,20 +77,25 @@
struct cap11xx_led {
struct cap11xx_priv *priv;
struct led_classdev cdev;
- struct work_struct work;
u32 reg;
- enum led_brightness new_brightness;
};
#endif
struct cap11xx_priv {
struct regmap *regmap;
+ struct device *dev;
struct input_dev *idev;
+ const struct cap11xx_hw_model *model;
struct cap11xx_led *leds;
int num_leds;
/* config */
+ u8 analog_gain;
+ u8 sensitivity_delta_sense;
+ u8 signal_guard_inputs_mask;
+ u32 thresholds[8];
+ u32 calib_sensitivities[8];
u32 keycodes[];
};
@@ -96,18 +103,10 @@ struct cap11xx_hw_model {
u8 product_id;
unsigned int num_channels;
unsigned int num_leds;
-};
-
-enum {
- CAP1106,
- CAP1126,
- CAP1188,
-};
-
-static const struct cap11xx_hw_model cap11xx_devices[] = {
- [CAP1106] = { .product_id = 0x55, .num_channels = 6, .num_leds = 0 },
- [CAP1126] = { .product_id = 0x53, .num_channels = 6, .num_leds = 2 },
- [CAP1188] = { .product_id = 0x50, .num_channels = 8, .num_leds = 8 },
+ bool has_gain;
+ bool has_irq_config;
+ bool has_sensitivity_control;
+ bool has_signal_guard;
};
static const struct reg_default cap11xx_reg_defaults[] = {
@@ -156,9 +155,6 @@ static bool cap11xx_volatile_reg(struct device *dev, unsigned int reg)
case CAP11XX_REG_SENOR_DELTA(3):
case CAP11XX_REG_SENOR_DELTA(4):
case CAP11XX_REG_SENOR_DELTA(5):
- case CAP11XX_REG_PRODUCT_ID:
- case CAP11XX_REG_MANUFACTURER_ID:
- case CAP11XX_REG_REVISION:
return true;
}
@@ -173,10 +169,177 @@ static const struct regmap_config cap11xx_regmap_config = {
.reg_defaults = cap11xx_reg_defaults,
.num_reg_defaults = ARRAY_SIZE(cap11xx_reg_defaults),
- .cache_type = REGCACHE_RBTREE,
+ .cache_type = REGCACHE_MAPLE,
.volatile_reg = cap11xx_volatile_reg,
};
+static int cap11xx_write_calib_sens_config_1(struct cap11xx_priv *priv)
+{
+ return regmap_write(priv->regmap,
+ CAP11XX_REG_CALIB_SENSITIVITY_CONFIG,
+ (priv->calib_sensitivities[3] << 6) |
+ (priv->calib_sensitivities[2] << 4) |
+ (priv->calib_sensitivities[1] << 2) |
+ priv->calib_sensitivities[0]);
+}
+
+static int cap11xx_write_calib_sens_config_2(struct cap11xx_priv *priv)
+{
+ return regmap_write(priv->regmap,
+ CAP11XX_REG_CALIB_SENSITIVITY_CONFIG2,
+ (priv->calib_sensitivities[7] << 6) |
+ (priv->calib_sensitivities[6] << 4) |
+ (priv->calib_sensitivities[5] << 2) |
+ priv->calib_sensitivities[4]);
+}
+
+static int cap11xx_init_keys(struct cap11xx_priv *priv)
+{
+ struct device_node *node = priv->dev->of_node;
+ struct device *dev = priv->dev;
+ int i, error;
+ u32 u32_val;
+
+ if (!node) {
+ dev_err(dev, "Corresponding DT entry is not available\n");
+ return -ENODEV;
+ }
+
+ if (!of_property_read_u32(node, "microchip,sensor-gain", &u32_val)) {
+ if (!priv->model->has_gain) {
+ dev_warn(dev,
+ "This model doesn't support 'sensor-gain'\n");
+ } else if (is_power_of_2(u32_val) && u32_val <= 8) {
+ priv->analog_gain = (u8)ilog2(u32_val);
+
+ error = regmap_update_bits(priv->regmap,
+ CAP11XX_REG_MAIN_CONTROL,
+ CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
+ priv->analog_gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
+ if (error)
+ return error;
+ } else {
+ dev_err(dev, "Invalid sensor-gain value %u\n", u32_val);
+ return -EINVAL;
+ }
+ }
+
+ if (of_property_read_bool(node, "microchip,irq-active-high")) {
+ if (priv->model->has_irq_config) {
+ error = regmap_update_bits(priv->regmap,
+ CAP11XX_REG_CONFIG2,
+ CAP11XX_REG_CONFIG2_ALT_POL,
+ 0);
+ if (error)
+ return error;
+ } else {
+ dev_warn(dev,
+ "This model doesn't support 'irq-active-high'\n");
+ }
+ }
+
+ if (!of_property_read_u32(node, "microchip,sensitivity-delta-sense", &u32_val)) {
+ if (!is_power_of_2(u32_val) || u32_val > 128) {
+ dev_err(dev, "Invalid sensitivity-delta-sense value %u\n", u32_val);
+ return -EINVAL;
+ }
+
+ priv->sensitivity_delta_sense = (u8)ilog2(u32_val);
+ u32_val = ~(FIELD_PREP(CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK,
+ priv->sensitivity_delta_sense));
+
+ error = regmap_update_bits(priv->regmap,
+ CAP11XX_REG_SENSITIVITY_CONTROL,
+ CAP11XX_REG_SENSITIVITY_CONTROL_DELTA_SENSE_MASK,
+ u32_val);
+ if (error)
+ return error;
+ }
+
+ if (!of_property_read_u32_array(node, "microchip,input-threshold",
+ priv->thresholds, priv->model->num_channels)) {
+ for (i = 0; i < priv->model->num_channels; i++) {
+ if (priv->thresholds[i] > 127) {
+ dev_err(dev, "Invalid input-threshold value %u\n",
+ priv->thresholds[i]);
+ return -EINVAL;
+ }
+
+ error = regmap_write(priv->regmap,
+ CAP11XX_REG_SENSOR_THRESH(i),
+ priv->thresholds[i]);
+ if (error)
+ return error;
+ }
+ }
+
+ if (!of_property_read_u32_array(node, "microchip,calib-sensitivity",
+ priv->calib_sensitivities,
+ priv->model->num_channels)) {
+ if (priv->model->has_sensitivity_control) {
+ for (i = 0; i < priv->model->num_channels; i++) {
+ if (!is_power_of_2(priv->calib_sensitivities[i]) ||
+ priv->calib_sensitivities[i] > 4) {
+ dev_err(dev, "Invalid calib-sensitivity value %u\n",
+ priv->calib_sensitivities[i]);
+ return -EINVAL;
+ }
+ priv->calib_sensitivities[i] = ilog2(priv->calib_sensitivities[i]);
+ }
+
+ error = cap11xx_write_calib_sens_config_1(priv);
+ if (error)
+ return error;
+
+ if (priv->model->num_channels > 4) {
+ error = cap11xx_write_calib_sens_config_2(priv);
+ if (error)
+ return error;
+ }
+ } else {
+ dev_warn(dev,
+ "This model doesn't support 'calib-sensitivity'\n");
+ }
+ }
+
+ for (i = 0; i < priv->model->num_channels; i++) {
+ if (!of_property_read_u32_index(node, "microchip,signal-guard",
+ i, &u32_val)) {
+ if (u32_val > 1)
+ return -EINVAL;
+ if (u32_val)
+ priv->signal_guard_inputs_mask |= 0x01 << i;
+ }
+ }
+
+ if (priv->signal_guard_inputs_mask) {
+ if (priv->model->has_signal_guard) {
+ error = regmap_write(priv->regmap,
+ CAP11XX_REG_SIGNAL_GUARD_ENABLE,
+ priv->signal_guard_inputs_mask);
+ if (error)
+ return error;
+ } else {
+ dev_warn(dev,
+ "This model doesn't support 'signal-guard'\n");
+ }
+ }
+
+ /* Provide some useful defaults */
+ for (i = 0; i < priv->model->num_channels; i++)
+ priv->keycodes[i] = KEY_A + i;
+
+ of_property_read_u32_array(node, "linux,keycodes",
+ priv->keycodes, priv->model->num_channels);
+
+ /* Disable autorepeat. The Linux input system has its own handling. */
+ error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
+ if (error)
+ return error;
+
+ return 0;
+}
+
static irqreturn_t cap11xx_thread_func(int irq_num, void *data)
{
struct cap11xx_priv *priv = data;
@@ -233,36 +396,27 @@ static void cap11xx_input_close(struct input_dev *idev)
}
#ifdef CONFIG_LEDS_CLASS
-static void cap11xx_led_work(struct work_struct *work)
+static int cap11xx_led_set(struct led_classdev *cdev,
+ enum led_brightness value)
{
- struct cap11xx_led *led = container_of(work, struct cap11xx_led, work);
+ struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
struct cap11xx_priv *priv = led->priv;
- int value = led->new_brightness;
/*
- * All LEDs share the same duty cycle as this is a HW limitation.
- * Brightness levels per LED are either 0 (OFF) and 1 (ON).
+ * All LEDs share the same duty cycle as this is a HW
+ * limitation. Brightness levels per LED are either
+ * 0 (OFF) and 1 (ON).
*/
- regmap_update_bits(priv->regmap, CAP11XX_REG_LED_OUTPUT_CONTROL,
- BIT(led->reg), value ? BIT(led->reg) : 0);
-}
-
-static void cap11xx_led_set(struct led_classdev *cdev,
- enum led_brightness value)
-{
- struct cap11xx_led *led = container_of(cdev, struct cap11xx_led, cdev);
-
- if (led->new_brightness == value)
- return;
-
- led->new_brightness = value;
- schedule_work(&led->work);
+ return regmap_update_bits(priv->regmap,
+ CAP11XX_REG_LED_OUTPUT_CONTROL,
+ BIT(led->reg),
+ value ? BIT(led->reg) : 0);
}
static int cap11xx_init_leds(struct device *dev,
struct cap11xx_priv *priv, int num_leds)
{
- struct device_node *node = dev->of_node, *child;
+ struct device_node *node = dev->of_node;
struct cap11xx_led *led;
int cnt = of_get_child_count(node);
int error;
@@ -291,7 +445,7 @@ static int cap11xx_init_leds(struct device *dev,
if (error)
return error;
- for_each_child_of_node(node, child) {
+ for_each_child_of_node_scoped(node, child) {
u32 reg;
led->cdev.name =
@@ -299,26 +453,20 @@ static int cap11xx_init_leds(struct device *dev,
led->cdev.default_trigger =
of_get_property(child, "linux,default-trigger", NULL);
led->cdev.flags = 0;
- led->cdev.brightness_set = cap11xx_led_set;
+ led->cdev.brightness_set_blocking = cap11xx_led_set;
led->cdev.max_brightness = 1;
led->cdev.brightness = LED_OFF;
error = of_property_read_u32(child, "reg", &reg);
- if (error != 0 || reg >= num_leds) {
- of_node_put(child);
+ if (error != 0 || reg >= num_leds)
return -EINVAL;
- }
led->reg = reg;
led->priv = priv;
- INIT_WORK(&led->work, cap11xx_led_work);
-
error = devm_led_classdev_register(dev, &led->cdev);
- if (error) {
- of_node_put(child);
+ if (error)
return error;
- }
priv->num_leds++;
led++;
@@ -334,35 +482,30 @@ static int cap11xx_init_leds(struct device *dev,
}
#endif
-static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
- const struct i2c_device_id *id)
+static int cap11xx_i2c_probe(struct i2c_client *i2c_client)
{
+ const struct i2c_device_id *id;
+ const struct cap11xx_hw_model *cap;
struct device *dev = &i2c_client->dev;
struct cap11xx_priv *priv;
- struct device_node *node;
- const struct cap11xx_hw_model *cap;
- int i, error, irq, gain = 0;
+ int i, error;
unsigned int val, rev;
- u32 gain32;
- if (id->driver_data >= ARRAY_SIZE(cap11xx_devices)) {
- dev_err(dev, "Invalid device ID %lu\n", id->driver_data);
- return -EINVAL;
- }
-
- cap = &cap11xx_devices[id->driver_data];
- if (!cap || !cap->num_channels) {
+ id = i2c_client_get_device_id(i2c_client);
+ cap = i2c_get_match_data(i2c_client);
+ if (!id || !cap || !cap->num_channels) {
dev_err(dev, "Invalid device configuration\n");
return -EINVAL;
}
priv = devm_kzalloc(dev,
- sizeof(*priv) +
- cap->num_channels * sizeof(priv->keycodes[0]),
+ struct_size(priv, keycodes, cap->num_channels),
GFP_KERNEL);
if (!priv)
return -ENOMEM;
+ priv->dev = dev;
+
priv->regmap = devm_regmap_init_i2c(i2c_client, &cap11xx_regmap_config);
if (IS_ERR(priv->regmap))
return PTR_ERR(priv->regmap);
@@ -391,38 +534,15 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
if (error < 0)
return error;
- dev_info(dev, "CAP11XX detected, revision 0x%02x\n", rev);
- node = dev->of_node;
-
- if (!of_property_read_u32(node, "microchip,sensor-gain", &gain32)) {
- if (is_power_of_2(gain32) && gain32 <= 8)
- gain = ilog2(gain32);
- else
- dev_err(dev, "Invalid sensor-gain value %d\n", gain32);
- }
-
- if (of_property_read_bool(node, "microchip,irq-active-high")) {
- error = regmap_update_bits(priv->regmap, CAP11XX_REG_CONFIG2,
- CAP11XX_REG_CONFIG2_ALT_POL, 0);
- if (error)
- return error;
- }
-
- /* Provide some useful defaults */
- for (i = 0; i < cap->num_channels; i++)
- priv->keycodes[i] = KEY_A + i;
+ dev_info(dev, "CAP11XX detected, model %s, revision 0x%02x\n",
+ id->name, rev);
- of_property_read_u32_array(node, "linux,keycodes",
- priv->keycodes, cap->num_channels);
+ priv->model = cap;
- error = regmap_update_bits(priv->regmap, CAP11XX_REG_MAIN_CONTROL,
- CAP11XX_REG_MAIN_CONTROL_GAIN_MASK,
- gain << CAP11XX_REG_MAIN_CONTROL_GAIN_SHIFT);
- if (error)
- return error;
+ dev_info(dev, "CAP11XX device detected, model %s, revision 0x%02x\n",
+ id->name, rev);
- /* Disable autorepeat. The Linux input system has its own handling. */
- error = regmap_write(priv->regmap, CAP11XX_REG_REPEAT_RATE, 0);
+ error = cap11xx_init_keys(priv);
if (error)
return error;
@@ -434,7 +554,7 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
priv->idev->id.bustype = BUS_I2C;
priv->idev->evbit[0] = BIT_MASK(EV_KEY);
- if (of_property_read_bool(node, "autorepeat"))
+ if (of_property_read_bool(dev->of_node, "autorepeat"))
__set_bit(EV_REP, priv->idev->evbit);
for (i = 0; i < cap->num_channels; i++)
@@ -469,13 +589,8 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
if (error)
return error;
- irq = irq_of_parse_and_map(node, 0);
- if (!irq) {
- dev_err(dev, "Unable to parse or map IRQ\n");
- return -ENXIO;
- }
-
- error = devm_request_threaded_irq(dev, irq, NULL, cap11xx_thread_func,
+ error = devm_request_threaded_irq(dev, i2c_client->irq,
+ NULL, cap11xx_thread_func,
IRQF_ONESHOT, dev_name(dev), priv);
if (error)
return error;
@@ -483,19 +598,67 @@ static int cap11xx_i2c_probe(struct i2c_client *i2c_client,
return 0;
}
+static const struct cap11xx_hw_model cap1106_model = {
+ .product_id = 0x55, .num_channels = 6, .num_leds = 0,
+ .has_gain = true,
+ .has_irq_config = true,
+};
+
+static const struct cap11xx_hw_model cap1126_model = {
+ .product_id = 0x53, .num_channels = 6, .num_leds = 2,
+ .has_gain = true,
+ .has_irq_config = true,
+};
+
+static const struct cap11xx_hw_model cap1188_model = {
+ .product_id = 0x50, .num_channels = 8, .num_leds = 8,
+ .has_gain = true,
+ .has_irq_config = true,
+};
+
+static const struct cap11xx_hw_model cap1203_model = {
+ .product_id = 0x6d, .num_channels = 3, .num_leds = 0,
+};
+
+static const struct cap11xx_hw_model cap1206_model = {
+ .product_id = 0x67, .num_channels = 6, .num_leds = 0,
+};
+
+static const struct cap11xx_hw_model cap1293_model = {
+ .product_id = 0x6f, .num_channels = 3, .num_leds = 0,
+ .has_gain = true,
+ .has_sensitivity_control = true,
+ .has_signal_guard = true,
+};
+
+static const struct cap11xx_hw_model cap1298_model = {
+ .product_id = 0x71, .num_channels = 8, .num_leds = 0,
+ .has_gain = true,
+ .has_sensitivity_control = true,
+ .has_signal_guard = true,
+};
+
static const struct of_device_id cap11xx_dt_ids[] = {
- { .compatible = "microchip,cap1106", },
- { .compatible = "microchip,cap1126", },
- { .compatible = "microchip,cap1188", },
- {}
+ { .compatible = "microchip,cap1106", .data = &cap1106_model },
+ { .compatible = "microchip,cap1126", .data = &cap1126_model },
+ { .compatible = "microchip,cap1188", .data = &cap1188_model },
+ { .compatible = "microchip,cap1203", .data = &cap1203_model },
+ { .compatible = "microchip,cap1206", .data = &cap1206_model },
+ { .compatible = "microchip,cap1293", .data = &cap1293_model },
+ { .compatible = "microchip,cap1298", .data = &cap1298_model },
+ { }
};
MODULE_DEVICE_TABLE(of, cap11xx_dt_ids);
static const struct i2c_device_id cap11xx_i2c_ids[] = {
- { "cap1106", CAP1106 },
- { "cap1126", CAP1126 },
- { "cap1188", CAP1188 },
- {}
+ { "cap1106", (kernel_ulong_t)&cap1106_model },
+ { "cap1126", (kernel_ulong_t)&cap1126_model },
+ { "cap1188", (kernel_ulong_t)&cap1188_model },
+ { "cap1203", (kernel_ulong_t)&cap1203_model },
+ { "cap1206", (kernel_ulong_t)&cap1206_model },
+ { "cap1293", (kernel_ulong_t)&cap1293_model },
+ { "cap1298", (kernel_ulong_t)&cap1298_model },
+ { }
};
MODULE_DEVICE_TABLE(i2c, cap11xx_i2c_ids);