diff options
Diffstat (limited to 'drivers/input/misc/Kconfig')
| -rw-r--r-- | drivers/input/misc/Kconfig | 159 |
1 files changed, 135 insertions, 24 deletions
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index dd5227cf8696..94a753fcb64f 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -33,6 +33,13 @@ config INPUT_88PM80X_ONKEY To compile this driver as a module, choose M here: the module will be called 88pm80x_onkey. +config INPUT_88PM886_ONKEY + tristate "Marvell 88PM886 onkey support" + depends on MFD_88PM886_PMIC + help + Support the onkey of Marvell 88PM886 PMIC as an input device + reporting power button status. + config INPUT_AB8500_PONKEY tristate "AB8500 Pon (PowerOn) Key" depends on AB8500_CORE @@ -107,7 +114,7 @@ config INPUT_ATC260X_ONKEY config INPUT_ATMEL_CAPTOUCH tristate "Atmel Capacitive Touch Button Driver" - depends on OF || COMPILE_TEST + depends on OF depends on I2C help Say Y here if an Atmel Capacitive Touch Button device which @@ -119,6 +126,28 @@ config INPUT_ATMEL_CAPTOUCH To compile this driver as a module, choose M here: the module will be called atmel_captouch. +config INPUT_AW86927 + tristate "Awinic AW86927 Haptic Driver Support" + depends on I2C && INPUT + select INPUT_FF_MEMLESS + select REGMAP_I2C + help + Say Y here if you have an Awinic AW86927 haptic chip. + + To compile this driver as a module, choose M here: the + module will be called aw86927. + +config INPUT_BBNSM_PWRKEY + tristate "NXP BBNSM Power Key Driver" + depends on ARCH_MXC || COMPILE_TEST + depends on OF + help + This is the bbnsm powerkey driver for the NXP i.MX application + processors. + + To compile this driver as a module, choose M here; the + module will be called bbnsm_pwrkey. + config INPUT_BMA150 tristate "BMA150/SMB380 acceleration sensor support" depends on I2C @@ -129,6 +158,16 @@ config INPUT_BMA150 To compile this driver as a module, choose M here: the module will be called bma150. +config INPUT_CS40L50_VIBRA + tristate "CS40L50 Haptic Driver support" + depends on MFD_CS40L50_CORE + help + Say Y here to enable support for Cirrus Logic's CS40L50 + haptic driver. + + To compile this driver as a module, choose M here: the + module will be called cs40l50-vibra. + config INPUT_E3X0_BUTTON tristate "NI Ettus Research USRP E3xx Button support." default n @@ -151,6 +190,17 @@ config INPUT_PCSPKR To compile this driver as a module, choose M here: the module will be called pcspkr. +config INPUT_PF1550_ONKEY + tristate "NXP PF1550 Onkey support" + depends on MFD_PF1550 + help + Say Y here if you want support for PF1550 PMIC. Onkey can trigger + release and 1s(push hold), 2s, 3s, 4s, 8s interrupt for long press + detect. + + To compile this driver as a module, choose M here. The module will be + called pf1550-onkey. + config INPUT_PM8941_PWRKEY tristate "Qualcomm PM8941 power key support" depends on MFD_SPMI_PMIC @@ -202,6 +252,16 @@ config INPUT_M68K_BEEP tristate "M68k Beeper support" depends on M68K +config INPUT_MAX7360_ROTARY + tristate "Maxim MAX7360 Rotary Encoder" + depends on MFD_MAX7360 + help + If you say yes here you get support for the rotary encoder on the + Maxim MAX7360 I/O Expander. + + To compile this driver as a module, choose M here: the module will be + called max7360_rotary. + config INPUT_MAX77650_ONKEY tristate "Maxim MAX77650 ONKEY support" depends on MFD_MAX77650 @@ -212,12 +272,12 @@ config INPUT_MAX77650_ONKEY will be called max77650-onkey. config INPUT_MAX77693_HAPTIC - tristate "MAXIM MAX77693/MAX77843 haptic controller support" - depends on (MFD_MAX77693 || MFD_MAX77843) && PWM + tristate "MAXIM MAX77693/MAX77705/MAX77843 haptic controller support" + depends on (MFD_MAX77693 || MFD_MAX77705 || MFD_MAX77843) && PWM select INPUT_FF_MEMLESS help This option enables support for the haptic controller on - MAXIM MAX77693 and MAX77843 chips. + MAXIM MAX77693, MAX77705 and MAX77843 chips. To compile this driver as module, choose M here: the module will be called max77693-haptic. @@ -330,7 +390,7 @@ config INPUT_CPCAP_PWRBUTTON config INPUT_WISTRON_BTNS tristate "x86 Wistron laptop button interface" - depends on X86_32 + depends on X86_32 && !UML select INPUT_SPARSEKMAP select NEW_LEDS select LEDS_CLASS @@ -468,6 +528,26 @@ config INPUT_TPS65218_PWRBUTTON To compile this driver as a module, choose M here. The module will be called tps65218-pwrbutton. +config INPUT_TPS65219_PWRBUTTON + tristate "TPS65219 Power button driver" + depends on MFD_TPS65219 + help + Say Y here if you want to enable power button reporting for + TPS65219 Power Management IC devices. + + To compile this driver as a module, choose M here. The module will + be called tps65219-pwrbutton. + +config INPUT_TPS6594_PWRBUTTON + tristate "TPS6594 Power button driver" + depends on MFD_TPS6594 + help + Say Y here if you want to enable power button reporting for + TPS6594 Power Management IC devices. + + To compile this driver as a module, choose M here. The module will + be called tps6594-pwrbutton. + config INPUT_AXP20X_PEK tristate "X-Powers AXP20X power button driver" depends on MFD_AXP20X @@ -546,13 +626,6 @@ config INPUT_PALMAS_PWRBUTTON To compile this driver as a module, choose M here. The module will be called palmas_pwrbutton. -config INPUT_PCF50633_PMU - tristate "PCF50633 PMU events" - depends on MFD_PCF50633 - help - Say Y to include support for delivering PMU events via input - layer on NXP PCF50633. - config INPUT_PCF8574 tristate "PCF8574 Keypad input device" depends on I2C @@ -588,7 +661,7 @@ config INPUT_PWM_VIBRA config INPUT_RK805_PWRKEY tristate "Rockchip RK805 PMIC power key support" - depends on MFD_RK808 + depends on MFD_RK8XX help Select this option to enable power key driver for RK805. @@ -662,17 +735,6 @@ config INPUT_DA9063_ONKEY To compile this driver as a module, choose M here: the module will be called da9063_onkey. -config INPUT_DM355EVM - tristate "TI DaVinci DM355 EVM Keypad and IR Remote" - depends on MFD_DM355EVM_MSP - select INPUT_SPARSEKMAP - help - Supports the pushbuttons and IR remote used with - the DM355 EVM board. - - To compile this driver as a module, choose M here: the - module will be called dm355evm_keys. - config INPUT_WM831X_ON tristate "WM831X ON pin" depends on MFD_WM831X @@ -730,6 +792,24 @@ config INPUT_ADXL34X_SPI To compile this driver as a module, choose M here: the module will be called adxl34x-spi. +config INPUT_IBM_PANEL + tristate "IBM Operation Panel driver" + depends on I2C && I2C_SLAVE + help + Say Y here if you have an IBM Operation Panel connected to your system + over I2C. The panel is typically connected only to a system's service + processor (BMC). + + If unsure, say N. + + The Operation Panel is a controller with some buttons and an LCD + display that allows someone with physical access to the system to + perform various administrative tasks. This driver only supports the part + of the controller that sends commands to the system. + + To compile this driver as a module, choose M here: the module will be + called ibm-panel. + config INPUT_IMS_PCU tristate "IMS Passenger Control Unit driver" depends on USB @@ -762,6 +842,16 @@ config INPUT_IQS626A To compile this driver as a module, choose M here: the module will be called iqs626a. +config INPUT_IQS7222 + tristate "Azoteq IQS7222A/B/C/D capacitive touch controller" + depends on I2C + help + Say Y to enable support for the Azoteq IQS7222A/B/C/D family + of capacitive touch controllers. + + To compile this driver as a module, choose M here: the + module will be called iqs7222. + config INPUT_CMA3000 tristate "VTI CMA3000 Tri-axis accelerometer" help @@ -862,6 +952,18 @@ config INPUT_HISI_POWERKEY To compile this driver as a module, choose M here: the module will be called hisi_powerkey. +config INPUT_QNAP_MCU + tristate "Input Support for QNAP MCU controllers" + depends on MFD_QNAP_MCU + help + This option enables support for input elements available on + embedded controllers used in QNAP NAS devices. + + This includes a polled power-button as well as a beeper. + + To compile this driver as a module, choose M here: the + module will be called qnap-mcu-input. + config INPUT_RAVE_SP_PWRBUTTON tristate "RAVE SP Power button Driver" depends on RAVE_SP_CORE @@ -881,6 +983,15 @@ config INPUT_SC27XX_VIBRA To compile this driver as a module, choose M here. The module will be called sc27xx_vibra. +config INPUT_RT5120_PWRKEY + tristate "RT5120 PMIC power key support" + depends on MFD_RT5120 || COMPILE_TEST + help + This enables support for RT5120 PMIC power key driver. + + To compile this driver as a module, choose M here. the module will + be called rt5120-pwrkey. + config INPUT_STPMIC1_ONKEY tristate "STPMIC1 PMIC Onkey support" depends on MFD_STPMIC1 |