diff options
Diffstat (limited to 'drivers/input/touchscreen/Kconfig')
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 173 |
1 files changed, 89 insertions, 84 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 68d99a112e14..7d5b72ee07fa 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -103,6 +103,18 @@ config TOUCHSCREEN_ADC To compile this driver as a module, choose M here: the module will be called resistive-adc-touch.ko. +config TOUCHSCREEN_APPLE_Z2 + tristate "Apple Z2 touchscreens" + depends on SPI && (ARCH_APPLE || COMPILE_TEST) + help + Say Y here if you have an ARM Apple device with + a touchscreen or a touchbar. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called apple_z2. + config TOUCHSCREEN_AR1021_I2C tristate "Microchip AR1020/1021 i2c touchscreen" depends on I2C && OF @@ -254,36 +266,6 @@ config TOUCHSCREEN_CYTTSP_SPI To compile this driver as a module, choose M here: the module will be called cyttsp_spi. -config TOUCHSCREEN_CYTTSP4_CORE - tristate "Cypress TrueTouch Gen4 Touchscreen Driver" - help - Core driver for Cypress TrueTouch(tm) Standard Product - Generation4 touchscreen controllers. - - Say Y here if you have a Cypress Gen4 touchscreen. - - If unsure, say N. - - To compile this driver as a module, choose M here. - -config TOUCHSCREEN_CYTTSP4_I2C - tristate "support I2C bus connection" - depends on TOUCHSCREEN_CYTTSP4_CORE && I2C - help - Say Y here if the touchscreen is connected via I2C bus. - - To compile this driver as a module, choose M here: the - module will be called cyttsp4_i2c. - -config TOUCHSCREEN_CYTTSP4_SPI - tristate "support SPI bus connection" - depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER - help - Say Y here if the touchscreen is connected via SPI bus. - - To compile this driver as a module, choose M here: the - module will be called cyttsp4_spi. - config TOUCHSCREEN_CYTTSP5 tristate "Cypress TrueTouch Gen5 Touchscreen Driver" depends on I2C @@ -416,9 +398,41 @@ config TOUCHSCREEN_GOODIX To compile this driver as a module, choose M here: the module will be called goodix. +config TOUCHSCREEN_GOODIX_BERLIN_CORE + tristate + +config TOUCHSCREEN_GOODIX_BERLIN_I2C + tristate "Goodix Berlin I2C touchscreen" + depends on I2C + select REGMAP_I2C + select TOUCHSCREEN_GOODIX_BERLIN_CORE + help + Say Y here if you have a Goodix Berlin IC connected to + your system via I2C. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called goodix_berlin_i2c. + +config TOUCHSCREEN_GOODIX_BERLIN_SPI + tristate "Goodix Berlin SPI touchscreen" + depends on SPI_MASTER + select REGMAP + select TOUCHSCREEN_GOODIX_BERLIN_CORE + help + Say Y here if you have a Goodix Berlin IC connected to + your system via SPI. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called goodix_berlin_spi. + config TOUCHSCREEN_HIDEEP tristate "HiDeep Touch IC" depends on I2C + select REGMAP_I2C help Say Y here if you have a touchscreen using HiDeep. @@ -427,9 +441,20 @@ config TOUCHSCREEN_HIDEEP To compile this driver as a module, choose M here : the module will be called hideep_ts. +config TOUCHSCREEN_HIMAX_HX852X + tristate "Himax HX852x(ES) touchscreen" + depends on I2C + help + Say Y here if you have a Himax HX852x(ES) touchscreen. + If unsure, say N. + + To compile this driver as a module, choose M here: the module + will be called himax_hx852x. + config TOUCHSCREEN_HYCON_HY46XX tristate "Hycon hy46xx touchscreen support" depends on I2C + select REGMAP_I2C help Say Y here if you have a touchscreen using Hycon hy46xx @@ -450,6 +475,18 @@ config TOUCHSCREEN_HYNITRON_CSTXXX To compile this driver as a module, choose M here: the module will be called hynitron-cstxxx. +config TOUCHSCREEN_HYNITRON_CST816X + tristate "Hynitron CST816x touchscreen" + depends on I2C + help + Say Y here if you have a touchscreen using a Hynitron + CST816x series touchscreen controller. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called hynitron-cst816x. + config TOUCHSCREEN_ILI210X tristate "Ilitek ILI210X based touchscreen" depends on I2C @@ -490,18 +527,6 @@ config TOUCHSCREEN_IPROC To compile this driver as a module, choose M here: the module will be called bcm_iproc_tsc. -config TOUCHSCREEN_S3C2410 - tristate "Samsung S3C2410/generic touchscreen input driver" - depends on ARCH_S3C24XX || SAMSUNG_DEV_TS - depends on S3C_ADC - help - Say Y here if you have the s3c2410 touchscreen. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called s3c2410_ts. - config TOUCHSCREEN_S6SY761 tristate "Samsung S6SY761 Touchscreen driver" depends on I2C @@ -607,18 +632,6 @@ config TOUCHSCREEN_MAX11801 To compile this driver as a module, choose M here: the module will be called max11801_ts. -config TOUCHSCREEN_MCS5000 - tristate "MELFAS MCS-5000 touchscreen" - depends on I2C - help - Say Y here if you have the MELFAS MCS-5000 touchscreen controller - chip in your system. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called mcs5000_ts. - config TOUCHSCREEN_MMS114 tristate "MELFAS MMS114 touchscreen" depends on I2C @@ -666,6 +679,16 @@ config TOUCHSCREEN_MTOUCH To compile this driver as a module, choose M here: the module will be called mtouch. +config TOUCHSCREEN_NOVATEK_NVT_TS + tristate "Novatek NT11205 touchscreen support" + depends on I2C + help + Say Y here if you have a Novatek NT11205 touchscreen. + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called novatek-nvt-ts. + config TOUCHSCREEN_IMAGIS tristate "Imagis touchscreen support" depends on I2C @@ -702,6 +725,7 @@ config TOUCHSCREEN_INEXIO config TOUCHSCREEN_MK712 tristate "ICS MicroClock MK712 touchscreen" + depends on ISA help Say Y here if you have the ICS MicroClock MK712 touchscreen controller chip in your system. @@ -770,6 +794,7 @@ config TOUCHSCREEN_PENMOUNT config TOUCHSCREEN_EDT_FT5X06 tristate "EDT FocalTech FT5x06 I2C Touchscreen support" depends on I2C + select REGMAP_I2C help Say Y here if you have an EDT "Polytouch" touchscreen based on the FocalTech FT5x06 family of controllers connected to @@ -839,22 +864,6 @@ config TOUCHSCREEN_TI_AM335X_TSC To compile this driver as a module, choose M here: the module will be called ti_am335x_tsc. -config TOUCHSCREEN_UCB1400 - tristate "Philips UCB1400 touchscreen" - depends on AC97_BUS - depends on UCB1400_CORE - help - This enables support for the Philips UCB1400 touchscreen interface. - The UCB1400 is an AC97 audio codec. The touchscreen interface - will be initialized only after the ALSA subsystem has been - brought up and the UCB1400 detected. You therefore have to - configure ALSA support as well (either built-in or modular, - independently of whether this driver is itself built-in or - modular) for this driver to work. - - To compile this driver as a module, choose M here: the - module will be called ucb1400_ts. - config TOUCHSCREEN_PIXCIR tristate "PIXCIR I2C touchscreens" depends on I2C @@ -940,20 +949,6 @@ config TOUCHSCREEN_WM97XX_MAINSTONE To compile this driver as a module, choose M here: the module will be called mainstone-wm97xx. -config TOUCHSCREEN_WM97XX_ZYLONITE - tristate "Zylonite accelerated touch" - depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE - depends on SND_PXA2XX_LIB_AC97 - select TOUCHSCREEN_WM9713 - help - Say Y here for support for streaming mode with the touchscreen - on Zylonite systems. - - If unsure, say N. - - To compile this driver as a module, choose M here: the - module will be called zylonite-wm97xx. - config TOUCHSCREEN_USB_COMPOSITE tristate "USB Touchscreen Driver" depends on USB_ARCH_HAS_HCD @@ -1395,6 +1390,16 @@ config TOUCHSCREEN_IQS5XX To compile this driver as a module, choose M here: the module will be called iqs5xx. +config TOUCHSCREEN_IQS7211 + tristate "Azoteq IQS7210A/7211A/E trackpad/touchscreen controller" + depends on I2C + help + Say Y to enable support for the Azoteq IQS7210A/7211A/E + family of trackpad/touchscreen controllers. + + To compile this driver as a module, choose M here: the + module will be called iqs7211. + config TOUCHSCREEN_ZINITIX tristate "Zinitix touchscreen support" depends on I2C |