diff options
Diffstat (limited to 'drivers/input/touchscreen/goodix.c')
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 145 |
1 files changed, 81 insertions, 64 deletions
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index f5aa240739f9..f8798d11ec03 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -22,7 +22,7 @@ #include <linux/slab.h> #include <linux/acpi.h> #include <linux/of.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include "goodix.h" #define GOODIX_GPIO_INT_NAME "irq" @@ -44,9 +44,11 @@ #define GOODIX_HAVE_KEY BIT(4) #define GOODIX_BUFFER_STATUS_TIMEOUT 20 -#define RESOLUTION_LOC 1 -#define MAX_CONTACTS_LOC 5 -#define TRIGGER_LOC 6 +#define RESOLUTION_LOC 1 +#define MAX_CONTACTS_LOC 5 +#define TRIGGER_LOC 6 + +#define GOODIX_POLL_INTERVAL_MS 17 /* 17ms = 60fps */ /* Our special handling for GPIO accesses through ACPI is x86 specific */ #if defined CONFIG_X86 && defined CONFIG_ACPI @@ -497,6 +499,14 @@ sync: input_sync(ts->input_dev); } +static void goodix_ts_work_i2c_poll(struct input_dev *input) +{ + struct goodix_ts_data *ts = input_get_drvdata(input); + + goodix_process_events(ts); + goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0); +} + /** * goodix_ts_irq_handler - The IRQ handler * @@ -513,13 +523,29 @@ static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static void goodix_enable_irq(struct goodix_ts_data *ts) +{ + if (ts->client->irq) + enable_irq(ts->client->irq); +} + +static void goodix_disable_irq(struct goodix_ts_data *ts) +{ + if (ts->client->irq) + disable_irq(ts->client->irq); +} + static void goodix_free_irq(struct goodix_ts_data *ts) { - devm_free_irq(&ts->client->dev, ts->client->irq, ts); + if (ts->client->irq) + devm_free_irq(&ts->client->dev, ts->client->irq, ts); } static int goodix_request_irq(struct goodix_ts_data *ts) { + if (!ts->client->irq) + return 0; + return devm_request_threaded_irq(&ts->client->dev, ts->client->irq, NULL, goodix_ts_irq_handler, ts->irq_flags, ts->client->name, ts); @@ -770,17 +796,6 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts) usleep_range(6000, 10000); /* T4: > 5ms */ - /* - * Put the reset pin back in to input / high-impedance mode to save - * power. Only do this in the non ACPI case since some ACPI boards - * don't have a pull-up, so there the reset pin must stay active-high. - */ - if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) { - error = gpiod_direction_input(ts->gpiod_rst); - if (error) - goto error; - } - return 0; error: @@ -884,7 +899,8 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) } } - if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) { + /* Some devices with gpio_int_idx 0 list a third unused GPIO */ + if ((ts->gpio_count == 2 || ts->gpio_count == 3) && ts->gpio_int_idx == 0) { ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_first_gpios; } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) { @@ -900,6 +916,25 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n"); ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_last_gpios; + } else if (ts->gpio_count == 1 && ts->gpio_int_idx == 0) { + /* + * On newer devices there is only 1 GpioInt resource and _PS0 + * does the whole reset sequence for us. + */ + acpi_device_fix_up_power(ACPI_COMPANION(dev)); + + /* + * Before the _PS0 call the int GPIO may have been in output + * mode and the call should have put the int GPIO in input mode, + * but the GPIO subsys cached state may still think it is + * in output mode, causing gpiochip_lock_as_irq() failure. + * + * Add a mapping for the int GPIO to make the + * gpiod_int = gpiod_get(..., GPIOD_IN) call succeed, + * which will explicitly set the direction to input. + */ + ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; + gpio_mapping = acpi_goodix_int_first_gpios; } else { dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n", ts->gpio_count, ts->gpio_int_idx); @@ -911,14 +946,6 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) return -EINVAL; } - /* - * Normally we put the reset pin in input / high-impedance mode to save - * power. But some x86/ACPI boards don't have a pull-up, so for the ACPI - * case, leave the pin as is. This results in the pin not being touched - * at all on x86/ACPI boards, except when needed for error-recover. - */ - ts->gpiod_rst_flags = GPIOD_ASIS; - return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping); } #else @@ -935,7 +962,6 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) */ static int goodix_get_gpio_config(struct goodix_ts_data *ts) { - int error; struct device *dev; struct gpio_desc *gpiod; bool added_acpi_mappings = false; @@ -944,40 +970,21 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) return -EINVAL; dev = &ts->client->dev; - /* - * By default we request the reset pin as input, leaving it in - * high-impedance when not resetting the controller to save power. - */ - ts->gpiod_rst_flags = GPIOD_IN; - ts->avdd28 = devm_regulator_get(dev, "AVDD28"); - if (IS_ERR(ts->avdd28)) { - error = PTR_ERR(ts->avdd28); - if (error != -EPROBE_DEFER) - dev_err(dev, - "Failed to get AVDD28 regulator: %d\n", error); - return error; - } + if (IS_ERR(ts->avdd28)) + return dev_err_probe(dev, PTR_ERR(ts->avdd28), "Failed to get AVDD28 regulator\n"); ts->vddio = devm_regulator_get(dev, "VDDIO"); - if (IS_ERR(ts->vddio)) { - error = PTR_ERR(ts->vddio); - if (error != -EPROBE_DEFER) - dev_err(dev, - "Failed to get VDDIO regulator: %d\n", error); - return error; - } + if (IS_ERR(ts->vddio)) + return dev_err_probe(dev, PTR_ERR(ts->vddio), "Failed to get VDDIO regulator\n"); retry_get_irq_gpio: /* Get the interrupt GPIO pin number */ gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN); - if (IS_ERR(gpiod)) { - error = PTR_ERR(gpiod); - if (error != -EPROBE_DEFER) - dev_err(dev, "Failed to get %s GPIO: %d\n", - GOODIX_GPIO_INT_NAME, error); - return error; - } + if (IS_ERR(gpiod)) + return dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get %s GPIO\n", + GOODIX_GPIO_INT_NAME); + if (!gpiod && has_acpi_companion(dev) && !added_acpi_mappings) { added_acpi_mappings = true; if (goodix_add_acpi_gpio_mappings(ts) == 0) @@ -987,14 +994,10 @@ retry_get_irq_gpio: ts->gpiod_int = gpiod; /* Get the reset line GPIO pin number */ - gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, ts->gpiod_rst_flags); - if (IS_ERR(gpiod)) { - error = PTR_ERR(gpiod); - if (error != -EPROBE_DEFER) - dev_err(dev, "Failed to get %s GPIO: %d\n", - GOODIX_GPIO_RST_NAME, error); - return error; - } + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_ASIS); + if (IS_ERR(gpiod)) + return dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get %s GPIO\n", + GOODIX_GPIO_RST_NAME); ts->gpiod_rst = gpiod; @@ -1217,6 +1220,18 @@ retry_read_config: return error; } + input_set_drvdata(ts->input_dev, ts); + + if (!ts->client->irq) { + error = input_setup_polling(ts->input_dev, goodix_ts_work_i2c_poll); + if (error) { + dev_err(&ts->client->dev, + "could not set up polling mode, %d\n", error); + return error; + } + input_set_poll_interval(ts->input_dev, GOODIX_POLL_INTERVAL_MS); + } + error = input_register_device(ts->input_dev); if (error) { dev_err(&ts->client->dev, @@ -1420,7 +1435,7 @@ static int goodix_suspend(struct device *dev) /* We need gpio pins to suspend/resume */ if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { - disable_irq(client->irq); + goodix_disable_irq(ts); return 0; } @@ -1464,7 +1479,7 @@ static int goodix_resume(struct device *dev) int error; if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { - enable_irq(client->irq); + goodix_enable_irq(ts); return 0; } @@ -1508,7 +1523,7 @@ static int goodix_resume(struct device *dev) static DEFINE_SIMPLE_DEV_PM_OPS(goodix_pm_ops, goodix_suspend, goodix_resume); static const struct i2c_device_id goodix_ts_id[] = { - { "GDIX1001:00", 0 }, + { "GDIX1001:00" }, { } }; MODULE_DEVICE_TABLE(i2c, goodix_ts_id); @@ -1517,6 +1532,8 @@ MODULE_DEVICE_TABLE(i2c, goodix_ts_id); static const struct acpi_device_id goodix_acpi_match[] = { { "GDIX1001", 0 }, { "GDIX1002", 0 }, + { "GDIX1003", 0 }, + { "GDX9110", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, goodix_acpi_match); |