diff options
Diffstat (limited to 'drivers/input/touchscreen/goodix.c')
| -rw-r--r-- | drivers/input/touchscreen/goodix.c | 309 |
1 files changed, 172 insertions, 137 deletions
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index a3bfc7a41679..f8798d11ec03 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -18,10 +18,11 @@ #include <linux/delay.h> #include <linux/irq.h> #include <linux/interrupt.h> +#include <linux/platform_data/x86/soc.h> #include <linux/slab.h> #include <linux/acpi.h> #include <linux/of.h> -#include <asm/unaligned.h> +#include <linux/unaligned.h> #include "goodix.h" #define GOODIX_GPIO_INT_NAME "irq" @@ -43,9 +44,11 @@ #define GOODIX_HAVE_KEY BIT(4) #define GOODIX_BUFFER_STATUS_TIMEOUT 20 -#define RESOLUTION_LOC 1 -#define MAX_CONTACTS_LOC 5 -#define TRIGGER_LOC 6 +#define RESOLUTION_LOC 1 +#define MAX_CONTACTS_LOC 5 +#define TRIGGER_LOC 6 + +#define GOODIX_POLL_INTERVAL_MS 17 /* 17ms = 60fps */ /* Our special handling for GPIO accesses through ACPI is x86 specific */ #if defined CONFIG_X86 && defined CONFIG_ACPI @@ -94,6 +97,7 @@ static const struct goodix_chip_data gt9x_chip_data = { static const struct goodix_chip_id goodix_chip_ids[] = { { .id = "1151", .data = >1x_chip_data }, + { .id = "1158", .data = >1x_chip_data }, { .id = "5663", .data = >1x_chip_data }, { .id = "5688", .data = >1x_chip_data }, { .id = "917S", .data = >1x_chip_data }, @@ -122,10 +126,18 @@ static const unsigned long goodix_irq_flags[] = { static const struct dmi_system_id nine_bytes_report[] = { #if defined(CONFIG_DMI) && defined(CONFIG_X86) { - .ident = "Lenovo YogaBook", - /* YB1-X91L/F and YB1-X90L/F */ + /* Lenovo Yoga Book X90F / X90L */ .matches = { - DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X9") + DMI_EXACT_MATCH(DMI_SYS_VENDOR, "Intel Corporation"), + DMI_EXACT_MATCH(DMI_PRODUCT_NAME, "CHERRYVIEW D1 PLATFORM"), + DMI_EXACT_MATCH(DMI_PRODUCT_VERSION, "YETI-11"), + } + }, + { + /* Lenovo Yoga Book X91F / X91L */ + .matches = { + /* Non exact match to match F + L versions */ + DMI_MATCH(DMI_PRODUCT_NAME, "Lenovo YB1-X91"), } }, #endif @@ -297,32 +309,17 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) return -ENOMSG; } -static struct input_dev *goodix_create_pen_input(struct goodix_ts_data *ts) +static int goodix_create_pen_input(struct goodix_ts_data *ts) { struct device *dev = &ts->client->dev; struct input_dev *input; input = devm_input_allocate_device(dev); if (!input) - return NULL; - - input_alloc_absinfo(input); - if (!input->absinfo) { - input_free_device(input); - return NULL; - } - - input->absinfo[ABS_X] = ts->input_dev->absinfo[ABS_MT_POSITION_X]; - input->absinfo[ABS_Y] = ts->input_dev->absinfo[ABS_MT_POSITION_Y]; - __set_bit(ABS_X, input->absbit); - __set_bit(ABS_Y, input->absbit); - input_set_abs_params(input, ABS_PRESSURE, 0, 255, 0, 0); + return -ENOMEM; - input_set_capability(input, EV_KEY, BTN_TOUCH); - input_set_capability(input, EV_KEY, BTN_TOOL_PEN); - input_set_capability(input, EV_KEY, BTN_STYLUS); - input_set_capability(input, EV_KEY, BTN_STYLUS2); - __set_bit(INPUT_PROP_DIRECT, input->propbit); + input_copy_abs(input, ABS_X, ts->input_dev, ABS_MT_POSITION_X); + input_copy_abs(input, ABS_Y, ts->input_dev, ABS_MT_POSITION_Y); /* * The resolution of these touchscreens is about 10 units/mm, the actual * resolution does not matter much since we set INPUT_PROP_DIRECT. @@ -330,6 +327,13 @@ static struct input_dev *goodix_create_pen_input(struct goodix_ts_data *ts) */ input_abs_set_res(input, ABS_X, 10); input_abs_set_res(input, ABS_Y, 10); + input_set_abs_params(input, ABS_PRESSURE, 0, 255, 0, 0); + + input_set_capability(input, EV_KEY, BTN_TOUCH); + input_set_capability(input, EV_KEY, BTN_TOOL_PEN); + input_set_capability(input, EV_KEY, BTN_STYLUS); + input_set_capability(input, EV_KEY, BTN_STYLUS2); + __set_bit(INPUT_PROP_DIRECT, input->propbit); input->name = "Goodix Active Pen"; input->phys = "input/pen"; @@ -339,25 +343,23 @@ static struct input_dev *goodix_create_pen_input(struct goodix_ts_data *ts) input->id.product = 0x1001; input->id.version = ts->version; - if (input_register_device(input) != 0) { - input_free_device(input); - return NULL; - } - - return input; + ts->input_pen = input; + return 0; } static void goodix_ts_report_pen_down(struct goodix_ts_data *ts, u8 *data) { - int input_x, input_y, input_w; + int input_x, input_y, input_w, error; u8 key_value; - if (!ts->input_pen) { - ts->input_pen = goodix_create_pen_input(ts); - if (!ts->input_pen) - return; + if (!ts->pen_input_registered) { + error = input_register_device(ts->input_pen); + ts->pen_input_registered = (error == 0) ? 1 : error; } + if (ts->pen_input_registered < 0) + return; + if (ts->contact_size == 9) { input_x = get_unaligned_le16(&data[4]); input_y = get_unaligned_le16(&data[6]); @@ -497,6 +499,14 @@ sync: input_sync(ts->input_dev); } +static void goodix_ts_work_i2c_poll(struct input_dev *input) +{ + struct goodix_ts_data *ts = input_get_drvdata(input); + + goodix_process_events(ts); + goodix_i2c_write_u8(ts->client, GOODIX_READ_COOR_ADDR, 0); +} + /** * goodix_ts_irq_handler - The IRQ handler * @@ -513,13 +523,29 @@ static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } +static void goodix_enable_irq(struct goodix_ts_data *ts) +{ + if (ts->client->irq) + enable_irq(ts->client->irq); +} + +static void goodix_disable_irq(struct goodix_ts_data *ts) +{ + if (ts->client->irq) + disable_irq(ts->client->irq); +} + static void goodix_free_irq(struct goodix_ts_data *ts) { - devm_free_irq(&ts->client->dev, ts->client->irq, ts); + if (ts->client->irq) + devm_free_irq(&ts->client->dev, ts->client->irq, ts); } static int goodix_request_irq(struct goodix_ts_data *ts) { + if (!ts->client->irq) + return 0; + return devm_request_threaded_irq(&ts->client->dev, ts->client->irq, NULL, goodix_ts_irq_handler, ts->irq_flags, ts->client->name, ts); @@ -770,17 +796,6 @@ int goodix_reset_no_int_sync(struct goodix_ts_data *ts) usleep_range(6000, 10000); /* T4: > 5ms */ - /* - * Put the reset pin back in to input / high-impedance mode to save - * power. Only do this in the non ACPI case since some ACPI boards - * don't have a pull-up, so there the reset pin must stay active-high. - */ - if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_GPIO) { - error = gpiod_direction_input(ts->gpiod_rst); - if (error) - goto error; - } - return 0; error: @@ -805,21 +820,6 @@ static int goodix_reset(struct goodix_ts_data *ts) } #ifdef ACPI_GPIO_SUPPORT -#include <asm/cpu_device_id.h> -#include <asm/intel-family.h> - -static const struct x86_cpu_id baytrail_cpu_ids[] = { - { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT, X86_FEATURE_ANY, }, - {} -}; - -static inline bool is_byt(void) -{ - const struct x86_cpu_id *id = x86_match_cpu(baytrail_cpu_ids); - - return !!id; -} - static const struct acpi_gpio_params first_gpio = { 0, 0, false }; static const struct acpi_gpio_params second_gpio = { 1, 0, false }; @@ -846,22 +846,16 @@ static int goodix_resource(struct acpi_resource *ares, void *data) struct device *dev = &ts->client->dev; struct acpi_resource_gpio *gpio; - switch (ares->type) { - case ACPI_RESOURCE_TYPE_GPIO: - gpio = &ares->data.gpio; - if (gpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT) { - if (ts->gpio_int_idx == -1) { - ts->gpio_int_idx = ts->gpio_count; - } else { - dev_err(dev, "More then one GpioInt resource, ignoring ACPI GPIO resources\n"); - ts->gpio_int_idx = -2; - } + if (acpi_gpio_get_irq_resource(ares, &gpio)) { + if (ts->gpio_int_idx == -1) { + ts->gpio_int_idx = ts->gpio_count; + } else { + dev_err(dev, "More then one GpioInt resource, ignoring ACPI GPIO resources\n"); + ts->gpio_int_idx = -2; } ts->gpio_count++; - break; - default: - break; - } + } else if (acpi_gpio_get_io_resource(ares, &gpio)) + ts->gpio_count++; return 0; } @@ -878,7 +872,7 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) const struct acpi_gpio_mapping *gpio_mapping = NULL; struct device *dev = &ts->client->dev; LIST_HEAD(resources); - int ret; + int irq, ret; ts->gpio_count = 0; ts->gpio_int_idx = -1; @@ -891,7 +885,22 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) acpi_dev_free_resource_list(&resources); - if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) { + /* + * CHT devices should have a GpioInt + a regular GPIO ACPI resource. + * Some CHT devices have a bug (where the also is bogus Interrupt + * resource copied from a previous BYT based generation). i2c-core-acpi + * will use the non-working Interrupt resource, fix this up. + */ + if (soc_intel_is_cht() && ts->gpio_count == 2 && ts->gpio_int_idx != -1) { + irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0); + if (irq > 0 && irq != ts->client->irq) { + dev_warn(dev, "Overriding IRQ %d -> %d\n", ts->client->irq, irq); + ts->client->irq = irq; + } + } + + /* Some devices with gpio_int_idx 0 list a third unused GPIO */ + if ((ts->gpio_count == 2 || ts->gpio_count == 3) && ts->gpio_int_idx == 0) { ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_first_gpios; } else if (ts->gpio_count == 2 && ts->gpio_int_idx == 1) { @@ -903,24 +912,40 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) dev_info(dev, "Using ACPI INTI and INTO methods for IRQ pin access\n"); ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_METHOD; gpio_mapping = acpi_goodix_reset_only_gpios; - } else if (is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) { + } else if (soc_intel_is_byt() && ts->gpio_count == 2 && ts->gpio_int_idx == -1) { dev_info(dev, "No ACPI GpioInt resource, assuming that the GPIO order is reset, int\n"); ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_last_gpios; + } else if (ts->gpio_count == 1 && ts->gpio_int_idx == 0) { + /* + * On newer devices there is only 1 GpioInt resource and _PS0 + * does the whole reset sequence for us. + */ + acpi_device_fix_up_power(ACPI_COMPANION(dev)); + + /* + * Before the _PS0 call the int GPIO may have been in output + * mode and the call should have put the int GPIO in input mode, + * but the GPIO subsys cached state may still think it is + * in output mode, causing gpiochip_lock_as_irq() failure. + * + * Add a mapping for the int GPIO to make the + * gpiod_int = gpiod_get(..., GPIOD_IN) call succeed, + * which will explicitly set the direction to input. + */ + ts->irq_pin_access_method = IRQ_PIN_ACCESS_NONE; + gpio_mapping = acpi_goodix_int_first_gpios; } else { dev_warn(dev, "Unexpected ACPI resources: gpio_count %d, gpio_int_idx %d\n", ts->gpio_count, ts->gpio_int_idx); + /* + * On some devices _PS0 does a reset for us and + * sometimes this is necessary for things to work. + */ + acpi_device_fix_up_power(ACPI_COMPANION(dev)); return -EINVAL; } - /* - * Normally we put the reset pin in input / high-impedance mode to save - * power. But some x86/ACPI boards don't have a pull-up, so for the ACPI - * case, leave the pin as is. This results in the pin not being touched - * at all on x86/ACPI boards, except when needed for error-recover. - */ - ts->gpiod_rst_flags = GPIOD_ASIS; - return devm_acpi_dev_add_driver_gpios(dev, gpio_mapping); } #else @@ -937,7 +962,6 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) */ static int goodix_get_gpio_config(struct goodix_ts_data *ts) { - int error; struct device *dev; struct gpio_desc *gpiod; bool added_acpi_mappings = false; @@ -946,40 +970,21 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts) return -EINVAL; dev = &ts->client->dev; - /* - * By default we request the reset pin as input, leaving it in - * high-impedance when not resetting the controller to save power. - */ - ts->gpiod_rst_flags = GPIOD_IN; - ts->avdd28 = devm_regulator_get(dev, "AVDD28"); - if (IS_ERR(ts->avdd28)) { - error = PTR_ERR(ts->avdd28); - if (error != -EPROBE_DEFER) - dev_err(dev, - "Failed to get AVDD28 regulator: %d\n", error); - return error; - } + if (IS_ERR(ts->avdd28)) + return dev_err_probe(dev, PTR_ERR(ts->avdd28), "Failed to get AVDD28 regulator\n"); ts->vddio = devm_regulator_get(dev, "VDDIO"); - if (IS_ERR(ts->vddio)) { - error = PTR_ERR(ts->vddio); - if (error != -EPROBE_DEFER) - dev_err(dev, - "Failed to get VDDIO regulator: %d\n", error); - return error; - } + if (IS_ERR(ts->vddio)) + return dev_err_probe(dev, PTR_ERR(ts->vddio), "Failed to get VDDIO regulator\n"); retry_get_irq_gpio: /* Get the interrupt GPIO pin number */ gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN); - if (IS_ERR(gpiod)) { - error = PTR_ERR(gpiod); - if (error != -EPROBE_DEFER) - dev_err(dev, "Failed to get %s GPIO: %d\n", - GOODIX_GPIO_INT_NAME, error); - return error; - } + if (IS_ERR(gpiod)) + return dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get %s GPIO\n", + GOODIX_GPIO_INT_NAME); + if (!gpiod && has_acpi_companion(dev) && !added_acpi_mappings) { added_acpi_mappings = true; if (goodix_add_acpi_gpio_mappings(ts) == 0) @@ -989,14 +994,10 @@ retry_get_irq_gpio: ts->gpiod_int = gpiod; /* Get the reset line GPIO pin number */ - gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, ts->gpiod_rst_flags); - if (IS_ERR(gpiod)) { - error = PTR_ERR(gpiod); - if (error != -EPROBE_DEFER) - dev_err(dev, "Failed to get %s GPIO: %d\n", - GOODIX_GPIO_RST_NAME, error); - return error; - } + gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_RST_NAME, GPIOD_ASIS); + if (IS_ERR(gpiod)) + return dev_err_probe(dev, PTR_ERR(gpiod), "Failed to get %s GPIO\n", + GOODIX_GPIO_RST_NAME); ts->gpiod_rst = gpiod; @@ -1168,6 +1169,7 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); +retry_read_config: /* Read configuration and apply touchscreen parameters */ goodix_read_config(ts); @@ -1175,6 +1177,16 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) touchscreen_parse_properties(ts->input_dev, true, &ts->prop); if (!ts->prop.max_x || !ts->prop.max_y || !ts->max_touch_num) { + if (!ts->reset_controller_at_probe && + ts->irq_pin_access_method != IRQ_PIN_ACCESS_NONE) { + dev_info(&ts->client->dev, "Config not set, resetting controller\n"); + /* Retry after a controller reset */ + ts->reset_controller_at_probe = true; + error = goodix_reset(ts); + if (error) + return error; + goto retry_read_config; + } dev_err(&ts->client->dev, "Invalid config (%d, %d, %d), using defaults\n", ts->prop.max_x, ts->prop.max_y, ts->max_touch_num); @@ -1208,6 +1220,18 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) return error; } + input_set_drvdata(ts->input_dev, ts); + + if (!ts->client->irq) { + error = input_setup_polling(ts->input_dev, goodix_ts_work_i2c_poll); + if (error) { + dev_err(&ts->client->dev, + "could not set up polling mode, %d\n", error); + return error; + } + input_set_poll_interval(ts->input_dev, GOODIX_POLL_INTERVAL_MS); + } + error = input_register_device(ts->input_dev); if (error) { dev_err(&ts->client->dev, @@ -1215,6 +1239,17 @@ static int goodix_configure_dev(struct goodix_ts_data *ts) return error; } + /* + * Create the input_pen device before goodix_request_irq() calls + * devm_request_threaded_irq() so that the devm framework frees + * it after disabling the irq. + * Unfortunately there is no way to detect if the touchscreen has pen + * support, so registering the dev is delayed till the first pen event. + */ + error = goodix_create_pen_input(ts); + if (error) + return error; + ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT; error = goodix_request_irq(ts); if (error) { @@ -1270,8 +1305,7 @@ static void goodix_disable_regulators(void *arg) regulator_disable(ts->avdd28); } -static int goodix_ts_probe(struct i2c_client *client, - const struct i2c_device_id *id) +static int goodix_ts_probe(struct i2c_client *client) { struct goodix_ts_data *ts; const char *cfg_name; @@ -1382,17 +1416,15 @@ reset: return 0; } -static int goodix_ts_remove(struct i2c_client *client) +static void goodix_ts_remove(struct i2c_client *client) { struct goodix_ts_data *ts = i2c_get_clientdata(client); if (ts->load_cfg_from_disk) wait_for_completion(&ts->firmware_loading_complete); - - return 0; } -static int __maybe_unused goodix_suspend(struct device *dev) +static int goodix_suspend(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct goodix_ts_data *ts = i2c_get_clientdata(client); @@ -1403,7 +1435,7 @@ static int __maybe_unused goodix_suspend(struct device *dev) /* We need gpio pins to suspend/resume */ if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { - disable_irq(client->irq); + goodix_disable_irq(ts); return 0; } @@ -1439,7 +1471,7 @@ static int __maybe_unused goodix_suspend(struct device *dev) return 0; } -static int __maybe_unused goodix_resume(struct device *dev) +static int goodix_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct goodix_ts_data *ts = i2c_get_clientdata(client); @@ -1447,7 +1479,7 @@ static int __maybe_unused goodix_resume(struct device *dev) int error; if (ts->irq_pin_access_method == IRQ_PIN_ACCESS_NONE) { - enable_irq(client->irq); + goodix_enable_irq(ts); return 0; } @@ -1488,10 +1520,10 @@ static int __maybe_unused goodix_resume(struct device *dev) return 0; } -static SIMPLE_DEV_PM_OPS(goodix_pm_ops, goodix_suspend, goodix_resume); +static DEFINE_SIMPLE_DEV_PM_OPS(goodix_pm_ops, goodix_suspend, goodix_resume); static const struct i2c_device_id goodix_ts_id[] = { - { "GDIX1001:00", 0 }, + { "GDIX1001:00" }, { } }; MODULE_DEVICE_TABLE(i2c, goodix_ts_id); @@ -1500,6 +1532,8 @@ MODULE_DEVICE_TABLE(i2c, goodix_ts_id); static const struct acpi_device_id goodix_acpi_match[] = { { "GDIX1001", 0 }, { "GDIX1002", 0 }, + { "GDIX1003", 0 }, + { "GDX9110", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, goodix_acpi_match); @@ -1508,6 +1542,7 @@ MODULE_DEVICE_TABLE(acpi, goodix_acpi_match); #ifdef CONFIG_OF static const struct of_device_id goodix_of_match[] = { { .compatible = "goodix,gt1151" }, + { .compatible = "goodix,gt1158" }, { .compatible = "goodix,gt5663" }, { .compatible = "goodix,gt5688" }, { .compatible = "goodix,gt911" }, @@ -1533,7 +1568,7 @@ static struct i2c_driver goodix_ts_driver = { .name = "Goodix-TS", .acpi_match_table = ACPI_PTR(goodix_acpi_match), .of_match_table = of_match_ptr(goodix_of_match), - .pm = &goodix_pm_ops, + .pm = pm_sleep_ptr(&goodix_pm_ops), }, }; module_i2c_driver(goodix_ts_driver); |